| 11 October 2017 |
|---|
| Part Number | Tool Description | Location | Aircraft
or
Engine |
|---|
| 1601 | IAE1N20015 Calibrate | SLING Calibrate | North America | |
| 1602 | IAE1N20016 Calibrate | THREAD PROTECTOR,HINGE SHLDR BOLD;V2500/A321 Calibrate | North America | |
| 1603 | IAE1N20017 Calibrate | SAFETY ROD T/R ACTUATOR;V2500 Calibrate | North America | |
| 1604 | IAE1N20018 Calibrate | DOOR SUPPORT, THRUST REVERSER TO FAN COWL Calibrate | North America | |
| 1605 | IAE1N20018/LH Calibrate | DOOR SUPPORT, THRUST REVERSER TO FAN COWL. Calibrate | North America | |
| 1606 | IAE1N20019 Calibrate | DOOR SUPPORT, THRUST REVERSER TO FAN COWL Calibrate | North America | |
| 1607 | IAE1N20019/RH Calibrate | DOOR SUPPORT, T/R TO FAN COWL. Calibrate | North America | |
| 1608 | IAE1N20020 Calibrate | TORQUE WRENCH ADAPTER;V2500 Calibrate | North America | |
| 1609 | IAE1N20021 Calibrate | TOOL Calibrate | North America | |
| 1610 | IAE1N20022 Calibrate | TOOL Calibrate | North America | |
| 1611 | IAE1N20023 Calibrate | TORQUE ADAPTER TOOL Calibrate | North America | |
| 1612 | IAE1N20024 Calibrate | DRILL FIXTURE Calibrate | North America | |
| 1613 | IAE1N20026 Calibrate | TOOL Calibrate | North America | |
| 1614 | IAE1N20027 Calibrate | COVER, INLET;MD-90 Calibrate | North America | |
| 1615 | IAE1N20028 Calibrate | COVER Calibrate | North America | |
| 1616 | IAE1N20029 Calibrate | PLUG Calibrate | North America | |
| 1617 | IAE1N20030 Calibrate | THREAD PROTECTOR; MD-90 Calibrate | North America | |
| 1618 | IAE1N20031 Calibrate | PLUG Calibrate | North America | |
| 1619 | IAE1N20032 Calibrate | HYDRAULIC PUMP; MD-90 Calibrate | North America | |
| 1620 | IAE1N20033 Calibrate | WRENCH/SPANNER; MD-90 Calibrate | North America | |
| 1621 | IAE1N20034 Calibrate | WRENCH/SPANNER; MD-90 Calibrate | North America | |
| 1622 | IAE1N20035 Calibrate | SLING; MD-90 Calibrate | North America | |
| 1623 | IAE1N20036 Calibrate | TORQUE ADAPTER; MD-90 Calibrate | North America | |
| 1624 | IAE1N20037 Calibrate | GAGE/PUSH PULL;MD-90 Calibrate | North America | |
| 1625 | IAE1N20038 Calibrate | DOLLY- INLET COWL; MD-90 Calibrate | North America | |
| 1626 | IAE1N20039 Calibrate | DOLLY- FAN COWL; MD-90 Calibrate | North America | |
| 1627 | IAE1N20040 Calibrate | CNA DOLLY; MD-90 Calibrate | North America | |
| 1628 | IAE1N20041 Calibrate | LOCATING TOOL;MD-90 Calibrate | North America | |
| 1629 | IAE1N20042 Calibrate | LOCATING FIXTURE;MD-90 Calibrate | North America | |
| 1630 | IAE1N20043 Calibrate | CHECK FIXTURE Calibrate | North America | |
| 1631 | IAE1N20043/LH Calibrate | LOCATING FIXTURE;MD-90 Calibrate | North America | |
| 1632 | IAE1N20044 Calibrate | LOCATING FIXTURE Calibrate | North America | |
| 1633 | IAE1N20044/RH Calibrate | LOCATING FIXTURE;MD-90 Calibrate | North America | |
| 1634 | IAE1N20045 Calibrate | LOCATING FIXTURE;MD-90 Calibrate | North America | |
| 1635 | IAE1N20046 Calibrate | TIE BAR; MD-90 Calibrate | North America | |
| 1636 | IAE1N20047 Calibrate | TIE BAR;MD-90 Calibrate | North America | |
| 1637 | IAE1N20048 Calibrate | BRACKETS/HOISTING;MD-90 Calibrate | North America | |
| 1638 | IAE1N20049 Calibrate | PIN, LOCKOUT ACTUATOR Calibrate | North America | |
| 1639 | IAE1N20050 Calibrate | DOLLY THRUST REVERSE;MD-90 Calibrate | North America | |
| 1640 | IAE1N20051 Calibrate | DOLLY THRUST REVERSER;MD-90 Calibrate | North America | |
| 1641 | IAE1N20052 Calibrate | DOLLY THRUST REVERSER;MD-90 Calibrate | North America | |
| 1642 | IAE1N20053 Calibrate | DOLLY T/R;MD-90 Calibrate | North America | |
| 1643 | IAE1N20054 Calibrate | TORQUE ADAPTER;MD-90 Calibrate | North America | |
| 1644 | IAE1N20400 Calibrate | COVER-INLET COWL Calibrate | North America | |
| 1645 | IAE1N20401 Calibrate | DOLLY, INLET COWL Calibrate | North America | |
| 1646 | IAE1N20402 Calibrate | DOLLY-FAN COWL DOORS Calibrate | North America | |
| 1647 | IAE1N20403 Calibrate | SLING-INLET COWL Calibrate | North America | |
| 1648 | IAE1N20404 Calibrate | SLING,LEFT FAN COWL DOORS Calibrate | North America | |
| 1649 | IAE1N20405 Calibrate | THREAD PROTECTOR, COWL DOOR BOLTS;A321 Calibrate | North America | |
| 1650 | IAE1N20406 Calibrate | ROTATING FIXTURE, INLET COWL;A321 Calibrate | North America | |
| 1651 | IAE1N20435 Calibrate | BLANK PROTECTION Calibrate | North America | |
| 1652 | IAE1N20436 Calibrate | PLUG Calibrate | North America | |
| 1653 | IAE1N20439 Calibrate | PLUG Calibrate | North America | |
| 1654 | IAE1N20440 Calibrate | BLANK ASSEMBLY R/H Calibrate | North America | |
| 1655 | IAE1N20441 Calibrate | PLUG Calibrate | North America | |
| 1656 | IAE1N20442 Calibrate | PLUG Calibrate | North America | |
| 1657 | IAE1N20443 Calibrate | BLANK AY / PLUS 1 TIME SET UP CHARGE Calibrate | North America | |
| 1658 | IAE1N20444 Calibrate | TOOL-TAPPING Calibrate | North America | |
| 1659 | IAE1P16184 Calibrate | PULLER, KNOCKER Calibrate | North America | |
| 1660 | IAE3N20022 Calibrate | GAS SHIELD WELD FIXTURE CNA;A321 Calibrate | North America | |
| 1661 | IAE3N20025 Calibrate | LOCATING FIXTURE ACC DUCT;A321 Calibrate | North America | |
| 1662 | IAE3N20026 Calibrate | ROUTER FIXTURE;V2500 Calibrate | North America | |
| 1663 | IAE3N20445 Calibrate | PLATE SUPPORT;A321 Calibrate | North America | |
| 1664 | IAE5R18762 Calibrate | STAND, TRANSPORT;V2500-D5 Calibrate | North America | |
| 1665 | IAEN20023 Calibrate | TORQUE ADAPTOR TOOL Calibrate | North America | |
| 1666 | J53004-1 Calibrate | WRENCH-LATCH RADOME Calibrate | North America | |
| 1667 | J54004-62 Calibrate | REM/INSTL EQPT Calibrate | North America | |
| 1668 | J54005-1 Calibrate | HOIST ADAPTER-BRACE DIAGONAL Calibrate | North America | |
| 1669 | J54007-27 Calibrate | STRUT REMOVAL/INSTALLATION Calibrate | North America | |
| 1670 | J69336 Calibrate | POTENTIOMETER Calibrate | North America | |
| 1671 | J71001-44 Calibrate | EQUPT;SLING INLET COWL FOR GE90 & PW Calibrate | North America | |
| 1672 | J71002 Calibrate | TORQUE EQUIP. - ENGINE MOUNT BOLT GE90 Calibrate | North America | |
| 1673 | J71002 REV NC Calibrate | TORQUE EQUIP. - ENGINE MOUNT BOLT GE90 Calibrate | North America | |
| 1674 | J71002-52 Calibrate | REPLACED BY -57 Calibrate | North America | |
| 1675 | J71004-9 Calibrate | SLING - FAN COWL Calibrate | North America | |
| 1676 | J71005-85 Calibrate | BOOTSTRAP EQPT Calibrate | North America | |
| 1677 | J71007 Calibrate | TORQUE EQUIPMENT FOR PW Calibrate | North America | |
| 1678 | J71007-50 Calibrate | TORQUE EQPT Calibrate | North America | |
| 1679 | J71010-8 Calibrate | LIFT FIXTURE - FWD & AFT Calibrate | North America | |
| 1680 | J71015 Calibrate | SLING,FAN COWL SUPPORT BEAM GE90,PW 4084 Calibrate | North America | |
| 1681 | J71015-14 Calibrate | SLING EQPT Calibrate | North America | |
| 1682 | J71026-1 Calibrate | WRENCH EQPT Calibrate | North America | |
| 1683 | J78003 Calibrate | HOLD OPEN EQUIP - GE90 FAN REVERSER Calibrate | North America | |
| 1684 | J78003 REV NC Calibrate | HOLD OPEN EQUIP - GE90 FAN REVERSER Calibrate | North America | |
| 1685 | J78004 Calibrate | SLING EQUIP - GE90 FAN THRUST REVERSER Calibrate | North America | |
| 1686 | J78004 REV NC Calibrate | SLING EQUIP - GE90 FAN THRUST REVERSER Calibrate | North America | |
| 1687 | J78005 Calibrate | THREAD PROTECTOR EQUIP. Calibrate | North America | |
| 1688 | J78005 REV NC Calibrate | THREAD PROTECTOR EQUIP. Calibrate | North America | |
| 1689 | J78005-1 Calibrate | THREAD PROTECTOR EQPT Calibrate | North America | |
| 1690 | J78007 Calibrate | REMV'L / INST'L EQUIPMENT - EXHAUST SLEEVE AND PLU Calibrate | North America | |
| 1691 | J78022 Calibrate | T/R HOLD OPEN EQUPT FOR PW Calibrate | North America | |
| 1692 | J78022-60 Calibrate | HOLD OPEN EQPT Calibrate | North America | |
| 1693 | MIT012N8729-1 Calibrate | REAMING KIT Calibrate | North America | |
| 1694 | MIT012N8729-1 REV F Calibrate | REAMING KIT Calibrate | North America | |
| 1695 | PWA101211 Calibrate | GAGE, CROSS SHROUD - FAN BLADE Calibrate | North America | |
| 1696 | PWA101211 REV NC Calibrate | GAGE, CROSS SHROUD - FAN BLADE Calibrate | North America | |
| 1697 | PWA101212 Calibrate | MASTER, CROSS SHROUD - FAN BLADE Calibrate | North America | |
| 1698 | PWA101212 REV NC Calibrate | MASTER, CROSS SHROUD - FAN BLADE Calibrate | North America | |
| 1699 | PWA101213 Calibrate | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE Calibrate | North America | |
| 1700 | PWA101213 REV NC Calibrate | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE Calibrate | North America | |
| 1701 | PWA101240 Calibrate | EYE, LIFTING - ENGINE SPLIT SHIP, REAR FLIGHT MOUNT Calibrate | North America | |
| 1702 | PWA101240 REV A Calibrate | EYE, LIFTING - ENGINE SPLIT SHIP, REAR FLIGHT MOUNT Calibrate | North America | |
| 1703 | PWA101493 Calibrate | EYE, LIFTING - TURBINE ROTOR 1ST STAGE, REAR Calibrate | North America | |
| 1704 | PWA101493 REV NC Calibrate | EYE, LIFTING - TURBINE ROTOR 1ST STAGE, REAR Calibrate | North America | |
| 1705 | PWA14340 Calibrate | RIVETER-#1 BRG. INNER & OUTER RACE RETAINING RIVET Calibrate | North America | |
| 1706 | PWA14340 REV A Calibrate | RIVETER-#1 BRG. INNER & OUTER RACE RETAINING RIVET Calibrate | North America | |
| 1707 | PWA14370 Calibrate | HONEYCOMB SEGMENT SLIDE FIXTURE Calibrate | North America | |
| 1708 | PWA20333 Calibrate | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH Calibrate | North America | |
| 1709 | PWA20333 REV A Calibrate | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH Calibrate | North America | |
| 1710 | PWA21598 Calibrate | RIVETER - #1 BRG. INNER RACE RETAINING NUT Calibrate | North America | |
| 1711 | PWA21598 REV B Calibrate | RIVETER - #1 BRG. INNER RACE RETAINING NUT Calibrate | North America | |
| 1712 | PWA29389 Calibrate | PUMP, HYDRAULIC-HAND OPERATED SINGLE HOSE Calibrate | North America | |
| 1713 | PWA29389 REV C Calibrate | PUMP, HYDRAULIC-HAND OPERATED SINGLE HOSE Calibrate | North America | |
| 1714 | PWA33000 Calibrate | MASTER-MIDSPAN SHROUD COMPR. FAN BLADE 1ST STG. Calibrate | North America | |
| 1715 | PWA33304 Calibrate | EYE- REAR COMPRESSOR Calibrate | North America | |
| 1716 | PWA33304 REV NC Calibrate | EYE- REAR COMPRESSOR Calibrate | North America | |
| 1717 | PWA33782 Calibrate | GAGE,NO GO-2ND & 4TH STS. TURB. DISK,-PLANE SLOT WEAR Calibrate | North America | |
| 1718 | PWA33782 REV A Calibrate | GAGE,NO GO-2ND & 4TH STS. TURB. DISK,-PLANE SLOT WEAR Calibrate | North America | |
| 1719 | PWA33926 Calibrate | STAND, VERTICAL BUILD - REAR COMPRESSOR Calibrate | North America | |
| 1720 | PWA33926 REV NC Calibrate | STAND, VERTICAL BUILD - REAR COMPRESSOR Calibrate | North America | |
| 1721 | PWA45005 Calibrate | EYE, LIFTING - FRONT COMPR. FRONT HUB & FAN ASSY Calibrate | North America | |
| 1722 | PWA45005 REV NC Calibrate | EYE, LIFTING - FRONT COMPR. FRONT HUB & FAN ASSY Calibrate | North America | |
| 1723 | PWA45007 Calibrate | PULLER, KNOCKER - 1ST STAGE COMPRESSOR AIR SEAL Calibrate | North America | |
| 1724 | PWA45007 REV D Calibrate | PULLER, KNOCKER - 1ST STAGE COMPRESSOR AIR SEAL Calibrate | North America | |
| 1725 | PWA45009 Calibrate | PULLER, KNOCKER-FRONT ACCESSORY DRIVE GEAR Calibrate | North America | |
| 1726 | PWA45009 REV A Calibrate | PULLER, KNOCKER-FRONT ACCESSORY DRIVE GEAR Calibrate | North America | |
| 1727 | PWA45023 Calibrate | WRENCH - NO. 1 BRG INNER RACE RETAINING NUT Calibrate | North America | |
| 1728 | PWA45023 REV NC Calibrate | WRENCH - NO. 1 BRG INNER RACE RETAINING NUT Calibrate | North America | |
| 1729 | PWA45025 Calibrate | PULLER, HYDRAULIC - #1 BRG. INNER RACE & SEAL SEAT Calibrate | North America | |
| 1730 | PWA45025 REV E Calibrate | PULLER, HYDRAULIC - #1 BRG. INNER RACE & SEAL SEAT Calibrate | North America | |
| 1731 | PWA45050 Calibrate | EYE, LIFTING - COMPRESSOR INLET GROUP Calibrate | North America | |
| 1732 | PWA45050 REV NC Calibrate | EYE, LIFTING - COMPRESSOR INLET GROUP Calibrate | North America | |
| 1733 | PWA45104 Calibrate | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS Calibrate | North America | |
| 1734 | PWA45104 REV B Calibrate | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS Calibrate | North America | |
| 1735 | PWA45126 Calibrate | PUSHER - NO. 1 HUB, FROM 1.5 DISK Calibrate | North America | |
| 1736 | PWA45126 REV A Calibrate | PUSHER - NO. 1 HUB, FROM 1.5 DISK Calibrate | North America | |
| 1737 | PWA45203 Calibrate | WRENCH -FAN TIE ROD NUTS Calibrate | North America | |
| 1738 | PWA45203 REV B Calibrate | WRENCH -FAN TIE ROD NUTS Calibrate | North America | |
| 1739 | PWA45222 Calibrate | PULLER, KNOCKER - FRONT ACCESSORY DRIVE GROUP Calibrate | North America | |
| 1740 | PWA45222 REV B Calibrate | PULLER, KNOCKER - FRONT ACCESSORY DRIVE GROUP Calibrate | North America | |
| 1741 | PWA45228 Calibrate | ADAPTER Calibrate | North America | |
| 1742 | PWA45228 REV NC Calibrate | ADAPTER Calibrate | North America | |
| 1743 | PWA45232 Calibrate | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER Calibrate | North America | |
| 1744 | PWA45232 REV NC Calibrate | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER Calibrate | North America | |
| 1745 | PWA45234 Calibrate | COMPRESSOR- NO. 1 BRG. FACE SEAL ASSY Calibrate | North America | |
| 1746 | PWA45234 REV A Calibrate | COMPRESSOR- NO. 1 BRG. FACE SEAL ASSY Calibrate | North America | |
| 1747 | PWA45311 Calibrate | FIXTURE, RETAINING - REAR COMPR. ROTOR & STATOR REAR Calibrate | North America | |
| 1748 | PWA45311 REV A Calibrate | FIXTURE, RETAINING - REAR COMPR. ROTOR & STATOR REAR Calibrate | North America | |
| 1749 | PWA45333 Calibrate | SLING - FAN STAGE INSTALL & REMOVE Calibrate | North America | |
| 1750 | PWA45333 REV A Calibrate | SLING - FAN STAGE INSTALL & REMOVE Calibrate | North America | |
| 1751 | PWA45418 Calibrate | WRENCH, MECHANICAL SWEENEY 8100 SERIES PWRWRNCH Calibrate | North America | |
| 1752 | PWA45418 REV NC Calibrate | WRENCH, MECHANICAL SWEENEY 8100 SERIES PWRWRNCH Calibrate | North America | |
| 1753 | PWA45419 Calibrate | AIR TORQUE MULTIPLIER - PNEUMATIC POWER UNIT Calibrate | North America | |
| 1754 | PWA45419 REV A Calibrate | AIR TORQUE MULTIPLIER - PNEUMATIC POWER UNIT Calibrate | North America | |
| 1755 | PWA45421 Calibrate | PLATE, RETAINING-FRONT COMPR. DRIVE TURB. & EXHST DUCT. Calibrate | North America | |
| 1756 | PWA45421 REV A Calibrate | PLATE, RETAINING-FRONT COMPR. DRIVE TURB. & EXHST DUCT. Calibrate | North America | |
| 1757 | PWA45531 Calibrate | PUSHER, HYDRAULIC - #1 BEARING INNER RACE Calibrate | North America | |
| 1758 | PWA45531 REV NC Calibrate | PUSHER, HYDRAULIC - #1 BEARING INNER RACE Calibrate | North America | |
| 1759 | PWA45532 Calibrate | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION Calibrate | North America | |
| 1760 | PWA45532 REV NC Calibrate | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION Calibrate | North America | |
| 1761 | PWA45941 Calibrate | FIXTURE, STRESS RELIEVE-REAR TURBINE CASE Calibrate | North America | |
| 1762 | PWA45941 REV NC Calibrate | FIXTURE, STRESS RELIEVE-REAR TURBINE CASE Calibrate | North America | |
| 1763 | PWA46083 Calibrate | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS Calibrate | North America | |
| 1764 | PWA46083 REV NC Calibrate | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS Calibrate | North America | |
| 1765 | PWA46084 Calibrate | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) Calibrate | North America | |
| 1766 | PWA46084 REV A Calibrate | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) Calibrate | North America | |
| 1767 | PWA46085 Calibrate | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER Calibrate | North America | |
| 1768 | PWA46085 REV A Calibrate | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER Calibrate | North America | |
| 1769 | PWA46086 Calibrate | CUTTER - FAN BLADE FORMING L.E.(15 DEGREE CHAMFER) Calibrate | North America | |
| 1770 | PWA46086 REV NC Calibrate | CUTTER - FAN BLADE FORMING L.E.(15 DEGREE CHAMFER) Calibrate | North America | |
| 1771 | PWA46087 Calibrate | CUTTER - FAN BLADE FORMING L.E. (22 DEGREE CHAMFER) Calibrate | North America | |
| 1772 | PWA46087 REV NC Calibrate | CUTTER - FAN BLADE FORMING L.E. (22 DEGREE CHAMFER) Calibrate | North America | |
| 1773 | PWA46088 Calibrate | GAGE - AIRFOIL RADII INSPECTION Calibrate | North America | |
| 1774 | PWA46088 REV A Calibrate | GAGE - AIRFOIL RADII INSPECTION Calibrate | North America | |
| 1775 | PWA46131 Calibrate | CUTTER, FORMING L.E.E-2ND STAGE FAN BLADE (.001 RADIUS) Calibrate | North America | |
| 1776 | PWA46131 REV NC Calibrate | CUTTER, FORMING L.E.E-2ND STAGE FAN BLADE (.001 RADIUS) Calibrate | North America | |
| 1777 | PWA46132 Calibrate | CUTTER,FORMING L.E.- 2ND STAGE FAN BLADE (CHAMFER) Calibrate | North America | |
| 1778 | PWA46132 REV NC Calibrate | CUTTER,FORMING L.E.- 2ND STAGE FAN BLADE (CHAMFER) Calibrate | North America | |
| 1779 | PWA46156 Calibrate | FIXTURE, WELD/HEATTREAT #4 BRG HSG, HEATSHLD & ELBOW Calibrate | North America | |
| 1780 | PWA46156 REV A Calibrate | FIXTURE, WELD/HEATTREAT #4 BRG HSG, HEATSHLD & ELBOW Calibrate | North America | |
| 1781 | PWA46281 Calibrate | Calibrate | North America | |
| 1782 | PWA46281 TOOL Calibrate | Calibrate | North America | |
| 1783 | PWA46296 Calibrate | PUSHER, HYDRAULIC - #1 BEARING INNER RACE Calibrate | North America | |
| 1784 | PWA46296 REV NC Calibrate | PUSHER, HYDRAULIC - #1 BEARING INNER RACE Calibrate | North America | |
| 1785 | PWA46316 Calibrate | CUTTER - FAN BLADE FORMING LEADING EDGE (.014 RADIUS) Calibrate | North America | |
| 1786 | PWA46316 REV D Calibrate | CUTTER - FAN BLADE FORMING LEADING EDGE (.014 RADIUS) Calibrate | North America | |
| 1787 | PWA46318 Calibrate | CUTTER - FAN BLADE LEADING EDGE CHAMFER Calibrate | North America | |
| 1788 | PWA46318 REV B Calibrate | CUTTER - FAN BLADE LEADING EDGE CHAMFER Calibrate | North America | |
| 1789 | PWA46319 Calibrate | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK Calibrate | North America | |
| 1790 | PWA46319 REV NC Calibrate | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK Calibrate | North America | |
| 1791 | PWA46395 Calibrate | ADPTR-ENG LIFT & TURN(FRNT)FAN CMPR.INTERMEDIATE CASE Calibrate | North America | |
| 1792 | PWA46395 REV NC Calibrate | ADPTR-ENG LIFT & TURN(FRNT)FAN CMPR.INTERMEDIATE CASE Calibrate | North America | |
| 1793 | PWA47039 Calibrate | YOKE - REAR COMPRESSOR DRIVE TURBINE ROTOR Calibrate | North America | |
| 1794 | PWA47039 REV NC Calibrate | YOKE - REAR COMPRESSOR DRIVE TURBINE ROTOR Calibrate | North America | |
| 1795 | PWA7039 Calibrate | YOKE-REAR CMPR DRV TURB RTR; Calibrate | North America | |
| 1796 | PWA75028 Calibrate | GAGE - HYDRAULIC PUMP Calibrate | North America | |
| 1797 | PWA75028 REV D Calibrate | GAGE - HYDRAULIC PUMP Calibrate | North America | |
| 1798 | PWA75039 Calibrate | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM Calibrate | North America | |
| 1799 | PWA75039 REV NC Calibrate | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM Calibrate | North America | |
| 1800 | PWA75134 Calibrate | HOOK-SAFETY 6000 LBS. CAPACITY Calibrate | North America | |
