| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 111-10 | STRATOFLEX 111-10 HOSE | 4 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 31-111-100 | Test device (CALIBRATION) (CALIBRATION) | 1 | ||
| 01-1111-0000 | T-BAR: MU2, | 1 | ||
| 0249811110 | WASHER | 1 | ||
| 04−6011−1100 | Platform − General Maintenance | 1 | ||
| 059-C111-100 | GAS MONITOR | 2 | ||
| 1,111.1 OHMS TOTAL, 0.1 OHM/STEP) | BOX - DECADE, RESISTANCE | 1 | ||
| 109-3901-11-101 | TROLLEY, FLIR ARGOS | 1 | ||
| 11-11-0065 | Conductor Anvil | 1 | ||
| 11-11-0066 | Conductor Punch | 1 | ||
| 11-11-0067 | Insulation Anvil | 1 | ||
| 11-11-0068 | Barrel Form Punch | 1 | ||
| 11-11-0069 | Barrel Form Anvil | 1 | ||
| 11-11-0070 | Insulation Punch | 1 | ||
| 11-11-0377 | Hand Crimp Tool, Locator | 1 | ||
| 11-1100 | TIMING DISC | 1 | ||
| 111-1-1100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 111-101 | TOOL | 1 | ||
| 111-102 | CALIPER/DIGITAL | 1 | ||
| 111.10B-315 | MANOMETER 0-315 BAR | 1 | ||
| 11110002 | 415.SGH-USE11110010*1/4" RATCHET HOLE | 1 | ||
| 11110010 | 1/4" HI-LOK FINE T RATCHET | 1 | ||
| 11110020 | *OBSOLETE use 11111020* 415QR-1/4" QUICK RELEASE RATCHET | 2 | ||
| 111107000 | PULLING CLAW | 1 | ||
| 111107900 | PIN GAGE | 1 | ||
| 111108-201 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 11111010 | 415-2K-1/4" RATCHET HANDLE | 1 | ||
| 11111020 | 415QR.N-1/4" QR FINE TOOTH RATCHET | 1 | ||
| 11111030 | 415SG-QRN-1/4DR QRN RATCHET FINE TOOTH | 1 | ||
| 11111040 | 415QRLN-1/4DR QRN RATCHET FINE T LONG | 1 | ||
| 11111050 | 418 QR-QRMINI RATCHET FINE TOOTH 1/4" | 1 | ||
| 13111110 | *DISC* 512G-1/2"SQ DR SEALED RATCHET | 1 | ||
| 139A411110D | PROFILE TEMPLATE | 1 | ||
| 145-35111105-CA | HIGH STAGE VALVE TEST BOX / QTY 01 / NEW OR SV WITH CERT | 1 | ||
| 145-36111105 | HIGH STAGE VALVE TEST BOX | 1 | ||
| 145-36111105-CA | HIGH STAGE VALVE TEST BOX | 1 | ||
| 1523111-101 | JACK PAD | 1 | ||
| 1F11110 | Base, Assembly | 1 | ||
| 31111-001 | STARTER PIPE TIE-ROD CLAMP (AFT) | 1 | ||
| 31111-002 | STARTER PIPE TIE-ROD CLAMP (FWD) | 1 | ||
| 31111100 | CIRCUIT TEST BOXES OF COMPUTERS (REAR FACE) | 2 | View Images / Tech Appraisal | |
| 314A6111-1004 | NON HEAT TREATED COUPON | 1 | ||
| 314A6111-1005 | INLET-INNERBARREL PAINT COUPONS | 1 | ||
| 314A6111-1006 | HEAT TREATED COUPON | 1 | ||
| 3160S72-11-110 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 350A92-1111-01 | TOOL | 1 | ||
| 37111-1035 | Spring Valve | 1 | ||
| 427-240-111-101 | RING | 1 | ||
| 52100811110 | TOOL | 1 | ||
| 63811-1100 | Hand Crimper | 1 | ||
| 70309-02111-104 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 826477211110 | BAHCO EASYCU | 1 | ||
| 826480211110 | EASY CUT 3/4 | 1 | ||
| 826483311110 | EASY CUT 1IN | 1 | ||
| 8426111104 | RIVETING HAMMER | 1 | ||
| 919.01.11.104 | LOCKING WIRE | 1 | ||
| 9560111100 | BLANK ALTERNADOR | 1 | ||
| 98A57004011110 | SPAR BLOCK AFT-RIB 21 | 1 | ||
| 98D27504111100 | COVER ASSY | 1 | ||
| 98S712121111000 | SPECIAL WRENCH | 1 | ||
| 9910111-10 | FUEL QUANTITY TESTER | 1 | ||
| A11110 | EXTRACTOR LOCK LINK ACTUATOR PIN NLG | 1 | ||
| A3-1111-022N | SWITCH | 1 | ||
| AM-2563-200 & AM-2811-1100 | ENGINE STAND - CFM56-7 | 1 | ||
| AM-2811-1100 | ENGINE STAND - CFM56-7 | 2 | ||
| AM28811-1100 | ENGINE CRADLE | 1 | ||
| AP8426111104 | RRH 06 P | 1 | ||
| AP8426111107 | RIVETING HAMMER ,RRH 04P-01 | 1 | ||
| AST611110100 | 1/2" RIBE BIT SOCKET M10 100MM | 1 | ||
| AST611110140 | 1/2" RIBE BIT SOCKET M10 140MM | 1 | ||
| AST611110200 | 1/2" RIBE BIT SOCKET M10 200MM | 1 | ||
| AST61111055 | 1/2" RIBE BIT SOCKET M10 55MM | 1 | ||
| AT811-1-100 | MOTOR HOUSING W BUSHINGS | 1 | ||
| BAH1-1110622 | 6"WARDING FILE CUT 2 WITH HDL | 1 | ||
| BAH11110430 | 4 WARDING FILECUT 3 | 1 | ||
| BAH11110620 | 6 WARDING FILECUT 2 | 1 | ||
| BAH11110630 | 6 WARDING FILECUT 3 | 1 | ||
| BAH11110810 | 8 WARDING FILE CUT 1 | 1 | ||
| BAH11110820 | 8 WARDING FILE CUT 2 | 1 | ||
| BAH11110830 | 8 WARDING FILE CUT 3 | 1 | ||
| CAS-A111-10S | SLEEVE | 1 | ||
| CC11-110 | ENGINE INLET PLUGS, prior to 2012 (set of 2) | 1 | ||
| CFM56-7B ENGINE STAND CRADLE (Alternate to AM-2811-1100) | FZES3041 | 1 | ||
| CS-295-AG111-10287 | Rueda maciza | 1 | ||
| DV301-0060-211-1110 | TRANSUDUCER ASSY | 1 | ||
| DV301-0060-H11-1110 | TRANSUDUCER ASSY | 1 | ||
| FB70-025-111-10 | BAE 1-11 SHEAR PIN | 1 | ||
| FMRP-RUK-5-63-11.1-100 | Flexible rotoprobe | 1 | ||
| FMRP(30)-RUK-5-63-11.1-100 | Flexible rotoprobe | 1 | ||
| G1251-1110R | WASHER:, | 1 | ||
| Gedore-011110 | Gedore 011110 TBN2G - Preset Torque Wrenches, Range : 0.4-2 N.m / 3.5-18 lbf.in | 1 | ||
| GSE56111-101 | GENERAL ASSEMBLY | 1 | ||
| GSE56111-102 | HYD CYL ASSY | 1 | ||
| GT111105 | AIRCRAFT WHEEL CHOCK STANDARD A320/B737 | 1 | ||
| GT111108 | AIRCRAFT WHEEL A330 CHOCK LARGE 203X300X225 | 1 | ||
| HC11110E52 | "HEAT BLANKET 11""X11"" | 1 | ||
| IAE1F11110 | ref only - check S2 can MFR | 1 | ||
| JHW11110 | 5/16 COMB WR 12 PT STD SATIN | 1 | ||
| L1011-110 | INTAKE PLUGS (set of 3) | 1 | ||
| L11-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | ||
| LTCT32111-1000 | TOOL | 1 | ||
| LTCT32111-1001 | REMOVAL TOOL BEARING | 1 | ||
| LV70-111105 | DBS TV MAINTENANCE CONSOLE | 1 | ||
| M83461/1-110 | THIS IS NOT A TOOL | Not Available | Not Available | |
| M8791/1-110 | THIS IS NOT A TOOL | Not Available | Not Available | |
| MUTL-C11110-M100-MFA | MUTL-C11110-M100-MFA;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF FC/APC | 1 | ||
| MUTL-C11110-M100-MFP | MUTL-C11110-M100-MFP;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF FC/APC | 1 | ||
| MUTL-C11110-M100-MLC | MUTL-C11110-M100-MLC;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF LC/PC | 1 | ||
| MUTL-C11110-M100-MLU | MUTL-C11110-M100-MLU;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF LC/APC | 1 | ||
| MUTL-C11110-M100-MSC | MUTL-C11110-M100-MSC;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF SC/PC | 1 | ||
| MUTL-C11110-M100-MSU | MUTL-C11110-M100-MSU;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X30/70 1X50/50 SMF SC/APC | 1 | ||
| PA11-110 | ENGINE INLET PLUGS (set of 2) | 1 | ||
| PWA 111106 B | LIFT ARM | 1 | ||
| PWA111106 | ARM, LIFT | 1 | ||
| Q46111-100 | GUIDE CONE | 3 | ||
| RB11110 | 13/32" Replacement Cutter for Rotacut / Rotabroach Kit | 1 | ||
| RRT111103 | TOOL | 1 | ||
| STW11110030 | 1/4" FOD RATCHET | 1 | ||
| T211-110 | ENGINE COVER | 1 | ||
| TF1111-01 | HOSE: ASSEMBLY, | 1 | ||
| WEI-11110 | BRUSHES 12 | 1 | ||
| Y11-110 | INSULATED ENGINE COVER | 1 | ||
| YA111-10 | (YA111-10A) | 1 | ||
| YA111-10A | 10 AMP RELAY SHORTING PLUG V2 | 1 | ||
| YA511110 | ACROSS TOOL | 1 | ||
| Z289H0511110 | ISPC TEST BOX (SET INCLUDING) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
