| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11100 | Replacement Sheet Metal Hole Cutters (Cutter diameter: 1/4") (Material capacity: 1/4") (Add to cart: Add To Cart) | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 31-111-100 | Test device (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T5-8005-111-00 | PACIFIC SCIENTIFIC T5-8005-111-00 BLACK DIAL INDICATING 316 TO 14 & 500-2000 LBS CABLE TENSIOMETER | 2 | ||
| 00112111000 | 4 ARM STAR QK ADPTR 702958178 | 1 | ||
| 01-0771110-04 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 01-1111-0000 | T-BAR: MU2, | 1 | ||
| 030-2111-000 | CONTACT | 1 | ||
| 04-6001-1100 | PLATFORM - GENERAL MAINTENANCE | 6 | ||
| 04-6001-1100A9 | PLATFORM: MAINTENANCE,W/AIR PUMP, | 1 | ||
| 04-6001-1100B3 | STAND SAFETY YELLOW, | 1 | ||
| 04-6001-1100B7 | PLATFORM, MAINT MODIFIED, | 1 | ||
| 04-6001-1100B9 | PLATFORM: MAINTENANCE,W/GATE, | 1 | ||
| 04-6001-1100CA | Platform, Maintenance | 1 | ||
| 04−6011−1100 | Platform − General Maintenance | 1 | ||
| 05-7022-1110-06 | DUAL SYS, | 1 | ||
| 05-7022-1110-07 | PYROMETER, | 1 | ||
| 05-7022-1110-08 | OPTION: HOURMETER, | 1 | ||
| 05-7045-1110-08 | OPTION: HOURMETER, | 1 | ||
| 05-7046-1110-06 | OPTION: DUAL SYSTEM, | 1 | ||
| 05-7046-1110-07 | OPTION: PYROMETER, | 1 | ||
| 05-7046-1110-08 | OPTION: HOURMETER, | 1 | ||
| 05057111001 | TOOL | 1 | ||
| 059-C111-100 | GAS MONITOR | 2 | ||
| 1021J111-001P | LOCKING BAR RADAR ARRAY ELEVATION | 1 | ||
| 106-1-1100-02 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 106-1-1100-03 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 11-10026 | PLUG, INSULATOR | 1 | ||
| 11-10050-1 | INSERTION EXTRACTION TOOL | 1 | ||
| 11-10050-2 | INSERTION EXTRACTION TOOL | 1 | ||
| 11-10050-3 | INSERTION EXTRACTION TOOL | 1 | ||
| 11-10050-4 | INSERTION EXTRACTION TOOL | 1 | ||
| 11-10050-5 | INSERTION EXTRACTION TOOL | 1 | ||
| 11-10090 | TESTER: FLOW,AIR, | 1 | ||
| 11-10099 | RR Allison Tool | 1 | ||
| 11-11-0065 | Conductor Anvil | 1 | ||
| 11-11-0066 | Conductor Punch | 1 | ||
| 11-11-0067 | Insulation Anvil | 1 | ||
| 11-11-0068 | Barrel Form Punch | 1 | ||
| 11-11-0069 | Barrel Form Anvil | 1 | ||
| 11-11-0070 | Insulation Punch | 1 | ||
| 11-1100 | TIMING DISC | 1 | ||
| 111-006-12 | 6"/150MM DIGITAL CALIPER | 1 | ||
| 111-1-1100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 111.0000 | KUNZ DUBB (DYNAMIC UNIVERSAL BEAD BREAKER) | 1 | ||
| 1110.00 | Oxygen Cart 2B VGC | 1 | ||
| 11100001 | 413-NON-QR:1/4" SPEEDER BRACE | 1 | ||
| 11100005 | 413 QR-QR SPEEDER BRACE 1/4"DR | 1 | ||
| 11110002 | 415.SGH-USE11110010*1/4" RATCHET HOLE | 1 | ||
| 11110010 | 415SGH N-1/4" HI-LOK FINE T RATCHET | 1 | ||
| 11110020 | *OBSOLETE use 11111020* 415QR-1/4" QUICK RELEASE RATCHET | 2 | ||
| 112111000 | 4 ARM STAR QK ADPTR 702958178 | 1 | ||
| 1141-1100 | 15 TON AXLE WEIGHING JACK NEW EQUIPMENT | 1 | ||
| 1181-1100 | JACK - AXLE, CANTILEVER | 1 | ||
| 139-00-111-00 | END CAP | 1 | ||
| 2,311,100 | WHEEL PRESSURE MEASURING SENSOR | 1 | ||
| 206-011-100-109 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 206-011-100-145 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 21110021 | I PROBE MINI EXTENDE | 1 | ||
| 239211-100 | PROJECTOR, VIDEO | 1 | ||
| 25W311100-059 | DOOR, OXYGEN CHECK | 1 | ||
| 30-2111004-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 31111-001 | STARTER PIPE TIE-ROD CLAMP (AFT) | 1 | ||
| 31111-002 | STARTER PIPE TIE-ROD CLAMP (FWD) | 1 | ||
| 31111100 | CIRCUIT TEST BOXES OF COMPUTERS (REAR FACE) | 2 | View Images / Tech Appraisal | |
| 3130S111000080-90 02001 | COVER,AIRCRAFT GROUND SERVICING | 1 | ||
| 314A6111-1004 | NON HEAT TREATED COUPON | 1 | ||
| 314A6111-1005 | INLET-INNERBARREL PAINT COUPONS | 1 | ||
| 314A6111-1006 | HEAT TREATED COUPON | 1 | ||
| 332A93-3111-00 | FLAPPING AXIS HAFTING TOOL | 1 | ||
| 341-1100-1GSE | DOLLY - INLET TRANS-PORT | 1 | ||
| 341A91-1100-00 | MAIN BLADE SHIPMENT CONTAINER | 1 | ||
| 365A93-3111-00 | EXTRACTOR, ROTATING STAR BEARING | 1 | ||
| 411-100 | ENGINE INLET PLUGS (set of 4) | 1 | ||
| 41110013 | 1023-SPECIAL RING SPANNER, 13MM | 1 | ||
| 412-240-011-100 | CLAMP (GEARBOX) | 1 | ||
| 46211100 | 4621.6-DRALL+ SCREWDRIVER 10X180 | 2 | ||
| 5MS06-11100 | ROD SEAL SIZING BAR | 1 | ||
| 619-111-0022 | GAUGE 250 LB PW4000 TOOL | 1 | ||
| 622-8111-006(HF9010) | THIS IS NOT A TOOL | Not Available | Not Available | |
| 63811-1000 | Molex 63811-1000 Ratchet Crimping Tool | 2 | ||
| 63811-1100 | Hand Crimper | 1 | ||
| 64001-1100 | Hand Crimp Tool | 1 | ||
| 65102D53111009000 | DRILLING TEMPLATE (FAPE3) | 1 | ||
| 65102D53111009001 | DRILLING TEMPLATE (FAPE3) | 1 | ||
| 68101L92911100 | INS/EXT TOOL | 1 | ||
| 68101L929111001 | GAUGE TOOL FOR TERMINAL CRIMPING | 1 | ||
| 69.01.3130.S.11.10.035 | AIRBUS HELICOTER TOOL | 1 | ||
| 71110013 | 11030N-1-UNIVERSAL WHEEL HUB PULLER | 1 | ||
| 71110015 | UNIVERSAL WHEEL HUB PULLER | 1 | ||
| 8111001 | WRENCH | 1 | ||
| 826477211100 | BAHCO EASYCU | 1 | ||
| 826480211100 | EASY CUT 3/4 | 1 | ||
| 826483311100 | EASY CUT 1IN | 1 | ||
| 846-911-100-1 | Engine Tool | 1 | ||
| 8819211100 | TOOL KIT | 1 | ||
| 9002-3130S11100008 | STENCIL TYPE 14 BLADE LOWER SURFACE | 1 | ||
| 90201-11001-71 | WASHER PLATE | 1 | ||
| 95-02-3160S-11-10000 | TRESTLE | 1 | ||
| 95-92111-0001 | Escaleras | 1 | ||
| 9560111100 | BLANK ALTERNADOR | 1 | ||
| 95S71212111000 | PROTECTOR BARRY | 1 | ||
| 9711100184 | SCREW | 1 | ||
| 9711100231 | SCREW | 1 | ||
| 97A21102111000 | SAFETY RIG | 1 | ||
| 98A27508011100 | ADAPTER COMPL. | 1 | ||
| 98A54403011100 | TOOL | 1 | ||
| 98A544030111000 | TOOL | 1 | ||
| 98A57004011100 | BEAM FWD-RIB 15 | 1 | ||
| 98A71103511100 | BOOM IN TUBE | 1 | ||
| 98D27504111000 | SLAVE PIN-TRACK 2 & 3 | 11 | ||
| 98D27504111001 | COVER ASSY | 1 | ||
| 98D27504111100 | COVER ASSY | 1 | ||
| 98F55307511100 | LIFTING RING ASSY | 1 | ||
| 98L27209011100 | SLING-LOWER RUDDER | 1 | ||
| 98L53509011100 | PLATFORM | 1 | ||
| 98S55305011-100 | CALIBRATION BLOCK | 1 | ||
| 98S71212111000 | SPECIAL WRENCH | 1 | ||
| 98S712121111000 | SPECIAL WRENCH | 1 | ||
| 99D57204111000 | REFERENCE STANDARD | 1 | ||
| 99F53303111000 | REFERENCE STANDARD | 1 | ||
| 99F57204111000 | REFERENCE STANDARD | 1 | ||
| 9PRE65B00161-110-013 | PROTECTOR DE ROSCAS EJE SUPERIOR DE MUÑÓN | 1 | ||
| A040111000 | NITROGEN SERVICE UNIT | 1 | ||
| AM-2563-200 & AM-2811-1100 | ENGINE STAND - CFM56-7 | 1 | ||
| AM-2811-1100 | ENGINE STAND - CFM56-7 | 2 | ||
| AM28811-1100 | ENGINE CRADLE | 1 | ||
| APM0411100AM | M35 90-DEG CSK 100MM ROSE CUT | 1 | ||
| ARP-1.1-100H | LOW FREQUENCY REFLECTION RING PROBE .750"Ø ID 1.100"Ø OD WITH A TRIAX FISCHER CONNECTOR 50HZ-3KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | ||
| ARP-1.1-100H-1 | LOW FREQUENCY REFLECTION RING PROBE .530"Ø ID 1.100"Ø OD WITH A TRIAX FISCHER CONNECTOR 50Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | ||
| AST611311100 | 1/2" HEX BIT SOCKET H11 100MM | 1 | ||
| AT811-1-100 | MOTOR HOUSING W BUSHINGS | 1 | ||
| ATL1111-001G | CONTAINER, AIRCRAFT PROPELLER | 1 | ||
| BAH1-1100612 | 6" FLAT WITH HANDLE CUT 1 | 1 | ||
| BAH1-1100622 | 6" FLAT WITH HANDLE CUT 2 | 1 | ||
| BAH1-1100632 | 6" FLAT FILE W/HANDLE CUT 3 | 1 | ||
| BAH11100420 | 4IN FLAT FILE CUT 2 | 1 | ||
| BAH11100430 | FLAT FILE SMOOTH 4IN | 1 | ||
| BAH11100620 | FLAT FILE 2ND CUT 6IN | 1 | ||
| BAH11100630 | FLAT FILE SMOOTH 6IN | 1 | ||
| BAH11100810 | FLAT FILE BASTARD 8IN | 1 | ||
| BAH11100812 | 8" FLAT NO 1 CUT | 1 | ||
| BAH11100820 | 8IN FLAT FILECUT 2 | 1 | ||
| BAH11100822 | FLAT NO 2 CUT | 1 | ||
| BAH11100830 | FILE 110 FLAT SMOOTH 8 | 1 | ||
| BAH11100832 | 8" Flat File Smooth Cut | 1 | ||
| BD10-793-PC-111005F | DIAL GAGE | 1 | ||
| BHC1-1100822 | 8" FILE FLAT C/W HANDLE CUT2 | 1 | ||
| C04-6001-1100 | MANUAL FOR 04-6001-1100, | 1 | ||
| CC11-100 | ENGINE COVER | 1 | ||
| CFM56-7B ENGINE STAND CRADLE (Alternate to AM-2811-1100) | FZES3041 | 1 | ||
| D1-1 100 | DIGITAL PRESSURE EQUIPMENT | 1 | ||
| D52111000104W4100-03 | BOLT | 1 | ||
| D53111009000 | DRILLING TEMPLATE | 1 | ||
| D53111009001 | DRILLING TEMPLATE | 1 | ||
| DDIP201-110- 002 | ARBS WIRELESS MAINTENANCE SYSTEM B | 1 | ||
| DIP201-110-002 | ARBS WIRELESS SYSTEM | 1 | ||
| DT7111000BA3001 | V2500 Inlet Cowl Acoustic Panel Bracke | 1 | ||
| EMB-00111-001 | Torque Wrench Extension ARM | 2 | ||
| ENE11-100 | PUMP | 1 | ||
| EXBD400-50111-001 | CONFIRM FROM NDT FOR STANDARD | 1 | ||
| F27111000 | FIXTURE TOOLING | 1 | ||
| F532-R1110-028W80000-01 | MAIN DECK DUMMY FLOOR GRID | 1 | ||
| F532R1110-002W6000-01-20 | BAV FUER RUSSBODEN SEK 13 | 1 | ||
| FE171-110015 | TOOL LOCKING | 1 | ||
| FMRP-RUK-5-63-11.1-100 | Flexible rotoprobe | 1 | ||
| FMRP(30)-RUK-5-63-11.1-100 | Flexible rotoprobe | 1 | ||
| FSR-1911-10010A | .2630 REAMER / .2450 PILOT (NOMINAL) | 1 | ||
| Gedore-011100 | Gedore 011100 TBN2 - Preset Torque Wrenches, Range : 0.4-2 N.m / 3.5-18 lbf.in | 1 | ||
| GSB2111004 | KIT-TECHNE FLUIDIZED BATH (117 V240 V) | 2 | ||
| GSB2111004-120 | KIT FLUIDIZED BATH | 1 | ||
| GSB2111004-120 / GSB2111004-240 | KIT FLUIDIZED BATH SERIES | 1 | ||
| GSB2111004-240 | KIT, TEMPERATURE BATH | 1 | ||
| GSB2111004-7 | THERMOMETER | 1 | ||
| GSB2111004−140 | KIT, TEMPERATURE BATH | 1 | ||
| GSB5111001 | Test Kit − Hardness (500 Kg) | 1 | ||
| HIL11100020 | EXTENDING WHEEL BRACE 17/19MM | 1 | ||
| L1011-100 | INTAKE COVERS (set of 3) | 1 | ||
| L11-100 | ENGINE COVER | 1 | ||
| LCZ-101-(1100)KN-8-V5-P13 | TOOL | 1 | ||
| LCZ-101-(1100)KN-8-V5-P13-B | TOOL | 1 | ||
| LTCT32111-1000 | TOOL | 1 | ||
| LTCT32111-1001 | REMOVAL TOOL BEARING | 1 | ||
| MD11-100 | INTAKE COVERS, specify engine type (set of 3) | 1 | ||
| MFCRIG0R11100-KIT | ELECTRIC SERVICE GLOVE KIT L | 1 | ||
| MXWD3511-100 | XLRG BLK NITRILE 5MIL 100 CT | 1 | ||
| O111006 | TOOL | 1 | ||
| OHSS-212-070-111-001 | Exhaust Cover | 1 | ||
| P2-07-0011-100 | FLASHLIGHT | 1 | ||
| PA11-100 | ENGINE COVER | 1 | ||
| PWA 111007 | LIFT RING | 1 | ||
| PWA111001 | SUPPORT CRADLE | 1 | ||
| PWC64611-100 | PUNCH | 1 | ||
| Q46111-100 | GUIDE CONE | 3 | ||
| Q46911-100 | TEMPLATE | 1 | ||
| R1110000-003 | TOOL | 1 | ||
| RB1.1-100H | Ring Probe, Differential, 1.1"OD x .65" ID, 100Hz-1KHz, Triax | 1 | ||
| RB1.1-100H-2 | Ring Probe, Differential, 1.1"OD x .65" ID, 100Hz-1KHz, Triax | 1 | ||
| RB11100 | 1/4" Replacement Cutter for Rotacut / Rotabroach Kit | 1 | ||
| RDP1.1-100H | REFLECTION RING PROBE, 50HZ-3KHZ, .75" ID X 1.10" OD, TRIAX | 1 | ||
| RDP1.1-100H-1 | Reflection Ring Probe w/ Triax connector | 1 | ||
| RRT111004 | TOOL | 1 | ||
| RRT111005 | TOOL | 1 | ||
| RRT111007 | TOOL | 1 | ||
| RRT111009 | TOOL | 1 | ||
| S111001129070 | CRIMPING TOOL | 1 | ||
| S11100112CS20KS | PRONER HAND CRIMPING TOOLS | 1 | ||
| S211-100 | INTAKE PLUGS (non-folding type) (set of 2) | 1 | ||
| SEY11100 | MANUAL BUSHING R AND R SET | 1 | ||
| SEY11100-01A | PAD W 3 HOLES | 1 | ||
| SEY11100-02 | ACME SPINDLE M10XP1.5 | 1 | ||
| SEY11100-03 | ACME SPINDLE M12XP1.75 | 1 | ||
| SEY11100-04 | ACME SPINDLE M14XP2.0 | 1 | ||
| SEY11100-05 | ACME SPINDLE M16XP2.0 | 1 | ||
| SEY11100-06 | PRESS ADAPTER | 1 | ||
| SEY11100-34 | SLEEVE D44 D34 95L GOLD | 1 | ||
| SEY11100-36 | SLEEVE D46 D36 95L GOLD | 1 | ||
| SEY11100-38 | SLEEVE D48 D38 95L GOLD | 1 | ||
| SEY11100-40 | SLEEVE D50 D40 95L SILVER | 1 | ||
| SEY11100-42 | SLEEVE D52 D42 95L SILVER | 1 | ||
| SEY11100-44 | SLEEVE D54 D44 95L GOLD | 1 | ||
| SEY11100-46 | SLEEVE D56 D46 95L GOLD | 1 | ||
| SEY11100-48 | SLEEVE D58 D48 95L GOLD | 1 | ||
| SEY11100-50 | SLEEVE D60 D50 95L SILVER | 1 | ||
| SEY11100-52 | SLEEVE D62 D52 95L SILVER | 1 | ||
| SEY11100-54 | SLEEVE D64 D54 95L SILVER | 1 | ||
| SEY11100-56 | SLEEVE D66 D56 95L GOLD | 1 | ||
| SEY11100-58 | SLEEVE D68 D58 95L GOLD | 1 | ||
| SEY11100-60 | SLEEVE D70 D60 95L GOLD | 1 | ||
| SEY11100-62 | SLEEVE D72 D62 95L SILVER | 1 | ||
| SEY11100-64 | SLEEVE D74 D64 95L SILVER | 1 | ||
| SEY11100-66 | SLEEVE D76 D66 95L SILVER | 1 | ||
| SEY11100-68 | SLEEVE D78 D68 95L GOLD | 1 | ||
| SEY11100-70 | SLEEVE D80 D80 95L GOLD | 1 | ||
| SEY11100-72 | SLEEVE D82 D72 95L GOLD | 1 | ||
| SEY11100-75 | D85 D75 GOLD SLEEVE 95MML | 1 | ||
| SEY11100-80 | D90 D80 GOLD SLEEVE 95MML | 1 | ||
| SF11-1004-314 | SEAL, NONMETALLIC SPECIAL SHAPED | 1 | ||
| STW11110030 | 1/4" FOD RATCHET | 1 | ||
| T-1110-010 | FLUID TRANSFER PUMP | 1 | ||
| T211-100 | ENGINE INLET PLUGS, LP LoPresti cowl 2007 or newer (set of 2) | 1 | ||
| T5-8005-111-00 | TENSIOMETER | 8 | ||
| TESA-01110000 | Tesa 01110000 UNIMASTER SET 250-1475MM 0.01MM | 1 | ||
| TF1043-11-10-0 | HOSE: #4 MB,ASSEMBLY, | 1 | ||
| TFM250011100 | COUNTERBORE | 1 | ||
| TL011100 | TBN2 TORQUE WR. 0.2-2NM | 1 | ||
| TS11-100 | INTAKE PLUGS (set of 2) | 1 | ||
| WS7371110000 | SCS951/300 BELT | 1 | ||
| WSA11-100P | 2.5HP 100L COMPRESSOR 230V P | 1 | ||
| Y11-100 | ENGINE COVER | 1 | ||
| Y5-8005-111-00 | TENSIOMETER-500-2000 LBS | 1 | ||
| Z0111006 | Installation Tool | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
