| Part Number | Tool Description |
|---|
| 19201 | 112850S0100 Calibrate | 28.5 RCT 50HZ S 50' CBL(CE) Calibrate |
| 19202 | 112850S0100 Calibrate | UNIT,GROUND POWER Calibrate |
| 19203 | 112850S0100 Calibrate | UNIT,GROUND POWER Calibrate |
| 19204 | 112850S0200 Calibrate | RECTIFIER (28.5 VDC, 50HZ) 100 FT INPUT Calibrate |
| 19205 | 112850S0200 Calibrate | RECTIFIER (HELICOPTER ) Calibrate |
| 19206 | 112850S0200 Calibrate | RECTIFIER (HELICOPTER ) Calibrate |
| 19207 | 112860D0000 Calibrate | RECTIFIER (28.5 VDC, 60HZ) NO INPUT CABLE (CE) Calibrate |
| 19208 | 112860D0100 Calibrate | 28.5 RCT 60HZ DUAL 50' CBL(CE) Calibrate |
| 19209 | 112860D0200 Calibrate | 28.5 RCT 60HZ DUL 100' CBL(CE) Calibrate |
| 19210 | 112860S0000 Calibrate | GROUND POWER UNIT 28 VDC Calibrate |
| 19211 | 112860S0000FEDS Calibrate | GPU Calibrate |
| 19212 | 112860S0100 Calibrate | 28.5 RCT 60HZ SGL 50''''CBL CE Calibrate |
| 19213 | 112860S0200 Calibrate | 112860S0200 RECTIFIER 28DV Calibrate |
| 19214 | 11294-1 Calibrate | PLUG WATER IN-LET Calibrate |
| 19215 | 112941 Calibrate | PLUG WATER IN-LET Calibrate |
| 19216 | 11297-15 Calibrate | POSITIONER SPRING LOADED MS Calibrate |
| 19217 | 1129715 Calibrate | POSITIONER SPRING LOADED MS Calibrate |
| 19218 | 112RTA Calibrate | 12 PC, 12-POINT SAE FLANK DRIVE® LOW PROFILE RATCHET/ SOCKET SET (3/16-G/16") Calibrate |
| 19219 | 112STMMY Calibrate | 1/4DR 12PC 6PT DP SKTSET Calibrate |
| 19220 | 112TMMSY Calibrate | SOCKET DRIVE Calibrate |
| 19221 | 112TMMY Calibrate | 1/4 FITTING SOCKET SET - HEX HANDLE 5 TO 15MM 12 PIECES - SNAP-ON Calibrate |
| 19222 | 113-123-660 Calibrate | 3.5MHZ 0.25" TRANSDUCER WITH DELAY LINE Calibrate |
| 19223 | 113-124-660 Calibrate | DFR STYLE REMOVABLE DELAY LINE FOR CONTACT PROBE Calibrate |
| 19224 | 113-126-660 Calibrate | STANDARD REFERENCE : NDT3322A Calibrate |
| 19225 | 113-224-580 Calibrate | 5 MHZ MINIATURE TRANSDUCER FOR CRANKSHAFT INSPECTI Calibrate |
| 19226 | 113-224-590 Calibrate | ANGLE CONVERTER MINIATURE ANGLE BEAM TRANSDUCER (113-224-590) Calibrate |
| 19227 | 113-224-591 Calibrate | TRANSDUCER KB AEROTE Calibrate |
| 19228 | 113-241-043 Calibrate | FDCP--XDCR CRRHP 1X.50BNC (NORMAL PROBE FOR THRU TRANSMISSION) Calibrate |
| 19229 | 113-242-591 Calibrate | SEARCH UNIT Calibrate |
| 19230 | 113-243-043 Calibrate | FDCP--XDCR CRRHP 3.5X.50 Calibrate |
| 19231 | 113-244-043 Calibrate | PROBE Calibrate |
| 19232 | 11303 Calibrate | THREADED BIT STUBBY 3/32 Calibrate |
| 19233 | 11303 Calibrate | THREADED DRILL BIT - STUBBY - 3/32 Calibrate |
| 19234 | 11305 Calibrate | THREADED DRILL BIT - STUBBY - 1/8 Calibrate |
| 19235 | 11307 Calibrate | THREADED DRILL BIT - STUBBY - 5/32 Calibrate |
| 19236 | 11309 Calibrate | THREADED DRILL BIT - STUBBY - 3/16 Calibrate |
| 19237 | 11311 Calibrate | 7/32 ANGLE BIT965D COBALT STUBBY Calibrate |
| 19238 | 113123660 Calibrate | 3.5MHZ 0.25" TRANSDUCER WITH DELAY LINE Calibrate |
| 19239 | 113123660 Calibrate | PROBE Calibrate |
| 19240 | 113124660 Calibrate | DFR STYLE REMOVABLE DELAY LINE FOR CONTACT PROBE Calibrate |
| 19241 | 113124660 Calibrate | SEARCH UNIT Calibrate |
| 19242 | 113124660 Calibrate | STRAIGHT-BEAM PROBE K5MN, FDCP--XDCR DFR 5X.25 MD Calibrate |
| 19243 | 113124660 Calibrate | TOOL Calibrate |
| 19244 | 113124660 Calibrate | TRANSDUCTOR ULTRASONICO Calibrate |
| 19245 | 113124660 Calibrate | UNIT SEARCH Calibrate |
| 19246 | 113124660 Calibrate | UNIT SEARCH / ULTRASONIC SEARCH UNIT TRANSDUCER Calibrate |
| 19247 | 113126660 Calibrate | STANDARD REFERENCE : NDT3322A Calibrate |
| 19248 | 11313 Calibrate | THREADED DRILL BIT - STUBBY - 1/4 Calibrate |
| 19249 | 11317 Calibrate | THREADED BIT STUBBY 5/16 Calibrate |
| 19250 | 1132 Calibrate | HAND GREASE GUN (LINCOLN (SKF) MODEL 1132) Calibrate |
| 19251 | 113224580 Calibrate | 5 MHZ MINIATURE TRANSDUCER FOR CRANKSHAFT INSPECTI Calibrate |
| 19252 | 113224580 Calibrate | 5 MHZ MINIATURETRANSDUCER FOR CRANKSHAFT UNSPECTION Calibrate |
| 19253 | 113224580 Calibrate | TRANSDUCER Calibrate |
| 19254 | 113224580 Calibrate | TRANSDUCER, MINIAT Calibrate |
| 19255 | 113224580 Calibrate | TRANSDUCER, MINIATURE (GAMMA SERIES 5MHZ) Calibrate |
| 19256 | 113224580 Calibrate | TRANSDUCER, MINIATURE GAMMA SERIES 5MHZ Calibrate |
| 19257 | 113224580 Calibrate | ULTRASONIC PROBE Calibrate |
| 19258 | 113224580 Calibrate | UT PROBE GAMMA SERIE 5MHZ/ .25'' Calibrate |
| 19259 | 113224590 Calibrate | ANGLE CONVERTER MINIATURE ANGLE BEAM TRANSDUCER (113-224-590) Calibrate |
| 19260 | 113224590 Calibrate | PROBE FABP--MSWQC-GAM 5.0 X 0.25 Calibrate |
| 19261 | 113224590 Calibrate | TRANSDUCER, SCREW-IN TYPE, 5MHZ X .25" ELEMENT, 3/8-32 THREAD Calibrate |
| 19262 | 113224591 Calibrate | TRANSDUCER KB AEROTE Calibrate |
| 19263 | 113241043 Calibrate | FDCP--XDCR CRRHP 1X.50BNC (NORMAL PROBE FOR THRU TRANSMISSION) Calibrate |
| 19264 | 113241043 Calibrate | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 1MHZ X 0.5' TRANSDUCER Calibrate |
| 19265 | 113242591 Calibrate | SEARCH UNIT Calibrate |
| 19266 | 113243043 Calibrate | FDCP--XDCR CRRHP 3.5X.50 Calibrate |
| 19267 | 113244043 Calibrate | PROBE Calibrate |
| 19268 | 113244043 Calibrate | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 5MHZ X 0.5' TRANSDUCER. COUNTRY Calibrate |
| 19269 | 1133 Calibrate | GREASE GUN Calibrate |
| 19270 | 1134100-501 Calibrate | ADAPTER Calibrate |
| 19271 | 1134100501 Calibrate | ADAPTER Calibrate |
| 19272 | 1134100501 Calibrate | ADAPTER - FLUSHING, EVAPORATOR Calibrate |
| 19273 | 1134100501 Calibrate | EVAPORATOR Calibrate |
| 19274 | 1134100501 Calibrate | EVAPORATOR WASHING ADAPTER Calibrate |
| 19275 | 1134275-17 Calibrate | RECEIVER ASSY Calibrate |
| 19276 | 1134275-18 Calibrate | RECEIVER ASSY Calibrate |
| 19277 | 113427517 Calibrate | RECEIVER ASSY Calibrate |
| 19278 | 113427517 Calibrate | RECEIVER DRYVER ASSEMBLY FILTER Calibrate |
| 19279 | 113427517 Calibrate | RH RECEIVER DRYER ASSY Calibrate |
| 19280 | 113427518 Calibrate | RECEIVER ASSY Calibrate |
| 19281 | 113427518 Calibrate | RECEIVER DRYVER ASSEMBLY FILTER Calibrate |
| 19282 | 1134CLR Calibrate | GREASE GUN Calibrate |
| 19283 | 1135-8000 Calibrate | "PLATFORM - MAINTENANCE LIFT, 3 FT MINIMUM HEIGHT, 12.5 FT MAXIMUM HEIGHT Calibrate |
| 19284 | 11353P-23 Calibrate | DOME LEFT Calibrate |
| 19285 | 11353P-24 Calibrate | DOME RIGHT Calibrate |
| 19286 | 11353P23 Calibrate | DOME LEFT Calibrate |
| 19287 | 11353P23 Calibrate | DOME, LEFT Calibrate |
| 19288 | 11353P23 Calibrate | DOME,DRILLED LH MOSS GREEN Calibrate |
| 19289 | 11353P24 Calibrate | DOME RIGHT Calibrate |
| 19290 | 11353P24 Calibrate | DOME,DRILLED RH MOSS GREEN Calibrate |
| 19291 | 11358000 Calibrate | "PLATFORM - MAINTENANCE LIFT, 3 FT MINIMUM HEIGHT, 12.5 FT MAXIMUM HEIGHT Calibrate |
| 19292 | 11358000 Calibrate | PLATFORM - MAINTENANCE LIFT Calibrate |
| 19293 | 11358000 Calibrate | PLATFORM - MAINTENANCE LIFT, 3 FT MINIMUM Calibrate |
| 19294 | 11358000 Calibrate | PLATFORM - MAINTENANCE LIFT, 3 FT MINIMUM HEIGHT, 12.5 FT MAXIMUM HEIGHT Calibrate |
| 19295 | 11358000 Calibrate | PLATFORM LIFT, 3 FT MIN 12.5 FT MAX HEIGHT Calibrate |
| 19296 | 11358000 Calibrate | PORTABLE MAINTENANCE PLATFORM Calibrate |
| 19297 | 113858 Calibrate | RIVET- GOLD Calibrate |
| 19298 | 11389P-28 Calibrate | MIC SHIELD Calibrate |
| 19299 | 11389P28 Calibrate | MIC SHIELD Calibrate |
| 19300 | 113A.10C Calibrate | ADJUSTABLE WRENCH - FACOM Calibrate |
| 19301 | 113A.10T Calibrate | FACOM ADJUSTABLE. WRENCH Calibrate |
| 19302 | 113A.12SR Calibrate | NON-SPARKING ADJUSTABLE SPANNERS - 12'' Calibrate |
| 19303 | 113A.18C Calibrate | CHROMED ADJUSTABLE Calibrate |
| 19304 | 113A10C Calibrate | ADJUSTABLE WRENCH - FACOM Calibrate |
| 19305 | 113A10C Calibrate | ADJUSTABLEWRENCH-FACOM Calibrate |
| 19306 | 113A10T Calibrate | FACOM ADJUSTABLE. WRENCH Calibrate |
| 19307 | 113A12SR Calibrate | NON-SPARKING ADJUSTABLE SPANNERS - 12'' Calibrate |
| 19308 | 113A18C Calibrate | CHROMED ADJUSTABLE Calibrate |
| 19309 | 113A18C Calibrate | WRENCH Calibrate |
| 19310 | 113A3941-1 Calibrate | FLAP TRACK ASSY-NO. 2 Calibrate |
| 19311 | 113A39411 Calibrate | FLAP TRACK ASSY-NO. 2 Calibrate |
| 19312 | 113A7183-3 Calibrate | BALANCE WEIGHT Calibrate |
| 19313 | 113A7183-6 Calibrate | BALANCE WEIGHT Calibrate |
| 19314 | 113A71833 Calibrate | BALANCE WEIGHT Calibrate |
| 19315 | 113A71836 Calibrate | BALANCE WEIGHT Calibrate |
| 19316 | 113A9360-2 Calibrate | BULKHEAD Calibrate |
| 19317 | 113A93602 Calibrate | BULKHEAD Calibrate |
| 19318 | 113C.24C Calibrate | WRENCH Calibrate |
| 19319 | 113C24C Calibrate | WRENCH Calibrate |
| 19320 | 113N1635-3 Calibrate | PLATE ASSY-WIGGLE Calibrate |
| 19321 | 113N1635-4 Calibrate | PLATE ASSY Calibrate |
| 19322 | 113N16353 Calibrate | PLATE ASSY-WIGGLE Calibrate |
| 19323 | 113N16354 Calibrate | PLATE ASSY Calibrate |
| 19324 | 113N1679-31 Calibrate | PLATE Calibrate |
| 19325 | 113N1679-32 Calibrate | PLATE ASSY Calibrate |
| 19326 | 113N1679-33 Calibrate | PLATE Calibrate |
| 19327 | 113N167931 Calibrate | PLATE Calibrate |
| 19328 | 113N167932 Calibrate | PLATE ASSY Calibrate |
| 19329 | 113N167933 Calibrate | PLATE Calibrate |
| 19330 | 113TM Calibrate | SKT SET Calibrate |
| 19331 | 113W7232-1 Calibrate | BALANCE ADJUST WEIGHT Calibrate |
| 19332 | 113W72321 Calibrate | BALANCE ADJUST WEIGHT Calibrate |
| 19333 | 114-1064 Calibrate | BUSHING REM/INST TOOL Calibrate |
| 19334 | 114-1065 Calibrate | BUSHING REM/INST TOOL Calibrate |
| 19335 | 114-1066 Calibrate | INSTALLATION TOOL Calibrate |
| 19336 | 114-1069 Calibrate | INSTALLATION TOOL Calibrate |
| 19337 | 114-1070 Calibrate | TOOL Calibrate |
| 19338 | 114-1071 Calibrate | TOOL Calibrate |
| 19339 | 114-1074 Calibrate | TOOL FOR ASSEMBLY OF THE WHEEL AND TIRE Calibrate |
| 19340 | 114-1075 Calibrate | HOLD TOOL FOR OUTER Calibrate |
| 19341 | 114-1076 Calibrate | HOLD TOOL FOR INNER Calibrate |
| 19342 | 114-1077 Calibrate | LEAK TEST TOOL Calibrate |
| 19343 | 114-1078 Calibrate | SPECIAL TOOL FOR ASSEMBLY WHEEL AND TIRE Calibrate |
| 19344 | 114-1079 Calibrate | BEARING CUP REMOVAL TOOL Calibrate |
| 19345 | 114-1080 Calibrate | BEARING CUP INSTALLATION TOOL Calibrate |
| 19346 | 114-1086 Calibrate | BEARING CUP REMOVAL PLATE FOR INNER AND OUTER WHEE Calibrate |
| 19347 | 114-1087 Calibrate | BEARING CUP INSTALLATION PLATE FOR INNER WHEEL HAL Calibrate |
| 19348 | 114-1088 Calibrate | BEARING CUP INSTALLATION PLATE FOR OUTER WHEEL HALF Calibrate |
| 19349 | 114-1089 Calibrate | BEARING CUP REMOVAL PLATE Calibrate |
| 19350 | 114-1090 Calibrate | BEARING CUP INST. PLATE OUTER Calibrate |
| 19351 | 114-1091 Calibrate | BEARING CUP REMOVAL PLATE Calibrate |
| 19352 | 114-1092 Calibrate | BEARING CUP INST. PLATE INNER Calibrate |
| 19353 | 114-1095 Calibrate | TOOL Calibrate |
| 19354 | 114-1096 Calibrate | INSTALLATION CONE Calibrate |
| 19355 | 114-1097 Calibrate | INSTALLATION TOOL Calibrate |
| 19356 | 114-1103 Calibrate | BULLET TOOL FOR INSTALLATION OF PISTONS INTO ADJUS Calibrate |
| 19357 | 114-1104 Calibrate | PISTON SUPPORT TOOL FOR INSTALLATION OF PISTONS IN Calibrate |
| 19358 | 114-1105 Calibrate | GUIDE TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES Calibrate |
| 19359 | 114-1107 Calibrate | TOOL, ADJUSTER ASSEMBLY Calibrate |
| 19360 | 114-1134 Calibrate | BEARING CUP INSTALLATION TOOL Calibrate |
| 19361 | 114-1135 Calibrate | HUBS SUPPORT TOOL Calibrate |
| 19362 | 114-1136 Calibrate | DRIVE SHAFT TOOL Calibrate |
| 19363 | 114-1145 Calibrate | ADAPTER FOR A LEAK TEST Calibrate |
| 19364 | 114-1147 Calibrate | BUSHING Calibrate |
| 19365 | 114-1147TE Calibrate | TOOL, LEAK TEST Calibrate |
| 19366 | 114-1150 Calibrate | "GUIDE" TOOL FOR INSTALLATION OF PISTONS INTO THE ADJUSTER SLEEVE Calibrate |
| 19367 | 114-1151 Calibrate | O'RING INSTALLATION Calibrate |
| 19368 | 114-1159 Calibrate | BACKUP RING SIZING TOOL Calibrate |
| 19369 | 114-122 Calibrate | AILERON TRIM TAB POSITION INDICATOR Calibrate |
| 19370 | 114-1230 Calibrate | GREASE SEAL INSP Calibrate |
| 19371 | 114-1233 Calibrate | LEAK TOOL - THERMAL AND OVERINFLATION PLUG Calibrate |
| 19372 | 114-1241 Calibrate | TOOL Calibrate |
| 19373 | 114-1248 Calibrate | BF GOODRICH CO THE AEROSPACE DIV AIRCRAFT WHEEL AND BRAKE BRAKE PUMPING ATTACHMENT Calibrate |
| 19374 | 114-1252 Calibrate | TOOL FOR REMOVAL OF A BUSHING FROM A TORQUE BAR HOLE Calibrate |
| 19375 | 114-1274 Calibrate | LEAK TEST TOOL Calibrate |
| 19376 | 114-1275 Calibrate | SPECIAL TOOL Calibrate |
| 19377 | 114-1276 Calibrate | OUTER WHEEL HALF SUPPORT TOOL (BEARING CUP REMOVAL) Calibrate |
| 19378 | 114-1277 Calibrate | INNER WHEEL HALF SUPPORT TOOL (BEARING CUP REMOVAL) Calibrate |
| 19379 | 114-1278 Calibrate | OUTER WHEEL HALF SUPPORT TOOL (BEARING CUP INSTALLATION) Calibrate |
| 19380 | 114-1279 Calibrate | INNER WHEEL HALF SUPPORT TOOL (BEARING CUP INSTALLATION) Calibrate |
| 19381 | 114-1280 Calibrate | HOLDING TOOL Calibrate |
| 19382 | 114-1281 Calibrate | HOLDING TOOL Calibrate |
| 19383 | 114-1282 Calibrate | HOLDING TOOL Calibrate |
| 19384 | 114-1283 Calibrate | HOLDING TOOL Calibrate |
| 19385 | 114-1285 Calibrate | TOOL Calibrate |
| 19386 | 114-1355 Calibrate | SPLIT RING TOOL Calibrate |
| 19387 | 114-1360 Calibrate | LEAK TEST TOOL Calibrate |
| 19388 | 114-1361 Calibrate | REMOVAL AND INSTALLATION OF BEARING CUPS HOLDER Calibrate |
| 19389 | 114-1362 Calibrate | BEARING CUP REMOVAL PLATE Calibrate |
| 19390 | 114-1363 Calibrate | BEARING CUP INSTALLATION PLATE Calibrate |
| 19391 | 114-1366 Calibrate | TOOL Calibrate |
| 19392 | 114-1383 Calibrate | GREASE SEAL INSPECTION TOOL Calibrate |
| 19393 | 114-1424 Calibrate | "WHEEL HALF SUPPORT TOOL (BEARING CUP INSTALLATION)" Calibrate |
| 19394 | 114-1439 Calibrate | SPECIAL TOOL Calibrate |
| 19395 | 114-1467-1 Calibrate | TOOL SEAL REMOVAL Calibrate |
| 19396 | 114-1467-2 Calibrate | TOOL SEAL REMOVAL Calibrate |
| 19397 | 114-151-1 Calibrate | AVIL Calibrate |
| 19398 | 114-151-2 Calibrate | COMPRESSION RIVETING ANVIL Calibrate |
| 19399 | 114-1554 Calibrate | OUTER BEARING CUP REMOVAL PLATE Calibrate |
| 19400 | 114-1555 Calibrate | OUTER BEARING CUP INSTALLATION PLATE Calibrate |
