| Part Number | Tool Description |
|---|
| 19001 | 11158 Calibrate | KHNL HEX-NUT DRAW CLECO 3/16" (0-1") Calibrate |
| 19002 | 11159 Calibrate | #21 LONG COBALT THREADED DRILL BIT Calibrate |
| 19003 | 1116 Calibrate | HYDRAULIC/FUEL/OIL GENERAL AIRCRAFT HOSE Calibrate |
| 19004 | 1116-4000-21 Calibrate | GDC75W ARINC 429 WIFI BUS ANALYZER Calibrate |
| 19005 | 11160-1 Calibrate | COFFEE RAIL ASSY Calibrate |
| 19006 | 111601 Calibrate | COFFEE RAIL ASSY Calibrate |
| 19007 | 111602 Calibrate | CALIPERS TOOL Calibrate |
| 19008 | 11162 Calibrate | HEX-NUT DRAW CLECO Calibrate |
| 19009 | 11163 Calibrate | ROLL-UP SAFETY ATEX-NON SPARKING FRENCH Calibrate |
| 19010 | 11164 Calibrate | HEX-NUT DRAW CLECO Calibrate |
| 19011 | 1116400021 Calibrate | GDC75W ARINC 429 WIFI BUS ANALYZER Calibrate |
| 19012 | 11165 Calibrate | HEX-NUT DRAW CLECO Calibrate |
| 19013 | 11166 Calibrate | HEX-NUT DRAW CLECO Calibrate |
| 19014 | 11166 Calibrate | #19 LONG COBALT THREADED DRILL BIT Calibrate |
| 19015 | 1117-2 Calibrate | SIGNAL SIMULATO Calibrate |
| 19016 | 11171 Calibrate | NORBAR 11171 - TW MDL 60 P TYPE 1/2 Calibrate |
| 19017 | 1117126 Calibrate | SIGTRONICS HEADSET TESTER Calibrate |
| 19018 | 11172 Calibrate | SIGNAL SIMULATO Calibrate |
| 19019 | 11172 Calibrate | WEDGE LOCK 5/32 (0-0.5) Calibrate |
| 19020 | 11173 Calibrate | WEDGE LOCK 3/16 (0-0.5) Calibrate |
| 19021 | 11174 Calibrate | WEDGE LOCK 1/4 (0-0.5) Calibrate |
| 19022 | 11176 Calibrate | KWNL WING-NUT DRAW CLECO 1/8" (0-1") Calibrate |
| 19023 | 11177 Calibrate | #16 LONG COBALT THREADED DRILL BIT Calibrate |
| 19024 | 11178 Calibrate | KWNL WING-NUT DRAW CLECO 3/16" (0-1") Calibrate |
| 19025 | 11179 Calibrate | KWNL WING-NUT DRAW CLECO 1/4" (0-1") Calibrate |
| 19026 | 1118 Calibrate | HYDRAULIC/FUEL/OIL GENERAL AIRCRAFT HOSE Calibrate |
| 19027 | 11180 Calibrate | #15 LONG COBALT THREADED DRILL BIT Calibrate |
| 19028 | 11180010 Calibrate | ¼” BIT HOLDER Calibrate |
| 19029 | 11185 Calibrate | COBALT THREADED DRILL BIT Calibrate |
| 19030 | 11187 Calibrate | 3/16 COBALT THREADED SHANK DRILL Calibrate |
| 19031 | 11188 Calibrate | CLECO 3/16"MARIPOSA LARGO Calibrate |
| 19032 | 1119- 0141-P1 Calibrate | DOOR ASSEMBLY Calibrate |
| 19033 | 11190 Calibrate | WING NUT CLECO Calibrate |
| 19034 | 11190141P1 Calibrate | DOOR ASSEMBLY Calibrate |
| 19035 | 11191 Calibrate | COBALT THREADED DRILL BIT Calibrate |
| 19036 | 11193 Calibrate | #10 LONG COBALT THREADEDE DRILL BIT Calibrate |
| 19037 | 111STMMDY Calibrate | 1/4DR 11PC 12PT DP SKTSET Calibrate |
| 19038 | 111TMMDY Calibrate | 1/4DR 11PC 12PT SHL SKTSET Calibrate |
| 19039 | 111Z-1 Calibrate | WRENCH (КЛЮЧ КОМБИНИРОВАННЫЙ) 1*1/8 Calibrate |
| 19040 | 111Z-1/2 Calibrate | COMBINATION WRENCH, 15° ANGLE, 1/2" AF Calibrate |
| 19041 | 111Z-1/4 Calibrate | COMBINATION WRENCH Calibrate |
| 19042 | 111Z-3/8 Calibrate | 12 POINT COMBINATION WRENCH1 Calibrate |
| 19043 | 111Z-5/16 Calibrate | 12 POINT COMBINATION WRENCH Calibrate |
| 19044 | 111Z-5/1612 Calibrate | POINT COMBINATION WRENCH Calibrate |
| 19045 | 111Z-7/16 Calibrate | COMBINATION WRENCH Calibrate |
| 19046 | 111Z-9/16 Calibrate | COMBINATION WRENCH, 15° ANGLE, 9/16" AF Calibrate |
| 19047 | 111Z1 Calibrate | WRENCH (КЛЮЧ КОМБИНИРОВАННЫЙ) 1*1/8 Calibrate |
| 19048 | 111Z12 Calibrate | COMBINATION WRENCH, 15° ANGLE, 1/2" AF Calibrate |
| 19049 | 111Z12 Calibrate | WRENCH (COMBINATION WRENCH) 1/2 Calibrate |
| 19050 | 111Z14 Calibrate | COMBINATION WRENCH Calibrate |
| 19051 | 111Z14 Calibrate | POINT COMBINATION WRENCH1 Calibrate |
| 19052 | 111Z14 Calibrate | WR COMBO 1/4 Calibrate |
| 19053 | 111Z38 Calibrate | 12 POINT COMBINATION WRENCH1 Calibrate |
| 19054 | 111Z38 Calibrate | WR COMBO 3/8 12 POINT Calibrate |
| 19055 | 111Z516 Calibrate | 12 POINT COMBINATION WRENCH Calibrate |
| 19056 | 111Z516 Calibrate | COMBINATION WRENCH, 15° ANGLE, 5/16" AF Calibrate |
| 19057 | 111Z51612 Calibrate | POINT COMBINATION WRENCH Calibrate |
| 19058 | 111Z716 Calibrate | COMBINATION WRENCH Calibrate |
| 19059 | 111Z916 Calibrate | COMBINATION WRENCH, 15° ANGLE, 9/16" AF Calibrate |
| 19060 | 111Z916 Calibrate | POINT COMBINATION WRENCH1 Calibrate |
| 19061 | 112-00007 Calibrate | ADAPTER - CABLE, FQIS Calibrate |
| 19062 | 112-1282 Calibrate | REMOVABLE BATTERY PACK Calibrate |
| 19063 | 112-153 Calibrate | MITUTOYO PN 112-153 (POINT MICROMETER WITH HARDENED TIP 0-25MM, 15° TIP) Calibrate |
| 19064 | 112-191 Calibrate | MITUTOYO 112-191 POINT MICROMETER 2-3 15 DEGREE Calibrate |
| 19065 | 112-204 Calibrate | MITUTOYO 112-204 POINT MICROMETER 75-100MM 30 DEGR Calibrate |
| 19066 | 112-225 Calibrate | MICROMETER, POINT STY Calibrate |
| 19067 | 112-4 Calibrate | HOSES IN FT Calibrate |
| 19068 | 112-401 Calibrate | MITUTOYO 112-401 CRIMP HEIGHT MICROMETER 0-25MM Calibrate |
| 19069 | 112-49002-001 Calibrate | SHEET, METAL Calibrate |
| 19070 | 112-49002-001 Calibrate | SHEET, METAL (2000 MM) - STONE FLOOR REMOVAL Calibrate |
| 19071 | 112-49002-001 Calibrate | SHEET, METAL 2000 MM - STONE FLOOR RE-MOVAL Calibrate |
| 19072 | 112-6 Calibrate | HOSES IN FT Calibrate |
| 19073 | 1120-01-050 Calibrate | CSI-1000 FUEL CELL ENTRY KIT Calibrate |
| 19074 | 1120-01-055 Calibrate | CSI-2000 FUEL CELL E Calibrate |
| 19075 | 1120-31502 W1 Calibrate | PRESSING-IN AND PUSHING-OUT DEVICE Calibrate |
| 19076 | 1120-31502W1 Calibrate | PRESSING-IN AND PUSHING-OUT DEVICE Calibrate |
| 19077 | 1120-31547W1 Calibrate | PRESSING IN TOOL Calibrate |
| 19078 | 1120-31547W2 Calibrate | EXRACTOR Calibrate |
| 19079 | 1120-8B-RED-500 Calibrate | NYLON AIR BRAKE TUBING (TUBING, NONMETALLIC) 4FT Calibrate |
| 19080 | 11200007 Calibrate | ADAPTER - CABLE, FQIS Calibrate |
| 19081 | 11200007 Calibrate | ADAPTER - FUEL QUANTITY Calibrate |
| 19082 | 11200007 Calibrate | ADAPTER CABLE Calibrate |
| 19083 | 11200007 Calibrate | ADAPTER: TESTER,QTY,FUEL,AL, Calibrate |
| 19084 | 112001050 Calibrate | CSI-1000 FUEL CELL ENTRY KIT Calibrate |
| 19085 | 112001050 Calibrate | EQ, COMMUNICATION, CONFINED SPACE Calibrate |
| 19086 | 112001050 Calibrate | EQUIP-COMMUNICATION Calibrate |
| 19087 | 112001050 Calibrate | EQUIPMENT - COMMUNICATION Calibrate |
| 19088 | 112001050 Calibrate | EQUIPMENT - COMMUNICATION, CONFINED 0 Calibrate |
| 19089 | 112001050 Calibrate | EQUIPMENT - COMMUNICATION, CONFINED SPACE Calibrate |
| 19090 | 112001050 Calibrate | INTERCOM - INTRINSICALLY SAFE COMMUNICATION SYSTEM Calibrate |
| 19091 | 112001055 Calibrate | CSI-2000 FUEL CELL E Calibrate |
| 19092 | 112001055 Calibrate | EQ, COMMUNICATION, CONFINED SPACE Calibrate |
| 19093 | 112001055 Calibrate | INTERCOM - INTRINSICALLY SAFE COMMUNICATION SYSTEM Calibrate |
| 19094 | 11203 Calibrate | THREADED DRILL BIT - LONG - 3/32 Calibrate |
| 19095 | 112031502W1 Calibrate | PRESSING-IN AND PUSHING-OUT DEVICE Calibrate |
| 19096 | 112031502W1 Calibrate | PRESSING-IN AND PUSHING-OUT DEVICE Calibrate |
| 19097 | 112031502W1 Calibrate | PRESSING-IN/ PUSHING-OUT DEVICE Calibrate |
| 19098 | 112031502W1 Calibrate | TOOL Calibrate |
| 19099 | 112031547W1 Calibrate | PRESSING IN TOOL Calibrate |
| 19100 | 112031547W1 Calibrate | PRESSING TOOL Calibrate |
| 19101 | 112031547W1 Calibrate | PRESSING TOOL 1120-31547W1EQUAL Calibrate |
| 19102 | 112031547W1 Calibrate | PRESSING-IN TOOL Calibrate |
| 19103 | 112031547W2 Calibrate | EXRACTOR Calibrate |
| 19104 | 112031547W2 Calibrate | EXTRACTOR Calibrate |
| 19105 | 11205 Calibrate | #5 LONG COBALT THREADED DRILL BIT Calibrate |
| 19106 | 11205 Calibrate | THREADED DRILL BIT - LONG - 1/8 Calibrate |
| 19107 | 11207 Calibrate | THREADED DRILL BIT - LONG - 5/32 Calibrate |
| 19108 | 11207 Calibrate | THREADED SHANK DRILL 5/32 Calibrate |
| 19109 | 11208BRED500 Calibrate | NYLON AIR BRAKE TUBING (TUBING, NONMETALLIC) 4FT Calibrate |
| 19110 | 11208BRED500 Calibrate | NYLON AIR BRAKE TUBING (TUBING, NONMETALLIC) 4FT Calibrate |
| 19111 | 11209 Calibrate | THREADED DRILL BIT - LONG - 3/16 Calibrate |
| 19112 | 1121-0628-P5 Calibrate | PACE ENDURA THERMO-DRIVE DESOLDERING TIP (1121-0628-P5:GMFDM) Calibrate |
| 19113 | 1121-14101 W8 Calibrate | EXTRACTOR Calibrate |
| 19114 | 1121-14101W8 Calibrate | EXTRACTOR Calibrate |
| 19115 | 1121-14101W8/PHP Calibrate | EXTRACTOR Calibrate |
| 19116 | 1121-W1 Calibrate | MOVABLE BEAM Calibrate |
| 19117 | 11210 Calibrate | CRIMPING TOOL Calibrate |
| 19118 | 11210-100 Calibrate | VELOCIMETER CABLE100 FT Calibrate |
| 19119 | 11210-20 Calibrate | CABLE Calibrate |
| 19120 | 11210-5 Calibrate | TOOL Calibrate |
| 19121 | 11210-50 Calibrate | CABLE VELO 50 FT Calibrate |
| 19122 | 11210100 Calibrate | VELOCIMETER CABLE100 FT Calibrate |
| 19123 | 1121020 Calibrate | TAIL TOP COM ANTENNA SA-002 Calibrate |
| 19124 | 1121020 Calibrate | CABLE Calibrate |
| 19125 | 1121020 Calibrate | CABLE ASSEMBLY, SPECIAL PURPOSE, E Calibrate |
| 19126 | 1121020 Calibrate | CABLE VELO 20FT Calibrate |
| 19127 | 112105 Calibrate | TOOL Calibrate |
| 19128 | 1121050 Calibrate | CABLE VELO 50 FT Calibrate |
| 19129 | 1121050 Calibrate | CABLE VELOCÍMETRO 50FT Calibrate |
| 19130 | 1121050 Calibrate | VELOCIMETER CABLE Calibrate |
| 19131 | 1121050 Calibrate | VELOMETER CABLE Calibrate |
| 19132 | 1121050 Calibrate | CABLE VELO 50 FT Calibrate |
| 19133 | 11210628P5 Calibrate | PACE ENDURA THERMO-DRIVE DESOLDERING TIP (1121-0628-P5:GMFDM) Calibrate |
| 19134 | 112108-0002 Calibrate | CHT DLT 28-32 CRIMP TOOL Calibrate |
| 19135 | 1121080002 Calibrate | CHT DLT 28-32 CRIMP TOOL Calibrate |
| 19136 | 11211 Calibrate | SQUEEZE SET 11 PIECE Calibrate |
| 19137 | 112114101W8 Calibrate | EXTRACTOR Calibrate |
| 19138 | 112114101W8 Calibrate | EXTRACTOR ASSY Calibrate |
| 19139 | 112114101W8 Calibrate | EXTRACTOR Calibrate |
| 19140 | 112114101W8 Calibrate | EXTRACTOR ASSY Calibrate |
| 19141 | 112114101W8 Calibrate | TOOL Calibrate |
| 19142 | 112114101W8PHP Calibrate | EXTRACTOR Calibrate |
| 19143 | 1121282 Calibrate | REMOVABLE BATTERY PACK Calibrate |
| 19144 | 11213 Calibrate | THREADED DRILL BIT - LONG - 1/4 Calibrate |
| 19145 | 112153 Calibrate | MITUTOYO PN 112-153 (POINT MICROMETER WITH HARDENED TIP 0-25MM, 15° TIP) Calibrate |
| 19146 | 112191 Calibrate | MITUTOYO 112-191 POINT MICROMETER 2-3 15 DEGREE Calibrate |
| 19147 | 1121W1 Calibrate | MOVABLE BEAM Calibrate |
| 19148 | 112204 Calibrate | MITUTOYO 112-204 POINT MICROMETER 75-100MM 30 DEGR Calibrate |
| 19149 | 1122121-101 Calibrate | RESTRAINT SYSTEM ASSY Calibrate |
| 19150 | 1122121101 Calibrate | RESTRAINT SYSTEM ASSY Calibrate |
| 19151 | 112225 Calibrate | MICROMETER, POINT STY Calibrate |
| 19152 | 11228 Calibrate | #1 LONG COBALT THREADED DRILL BIT Calibrate |
| 19153 | 1123-000 Calibrate | COCKPIT COVER Calibrate |
| 19154 | 1123000 Calibrate | COCKPIT COVER Calibrate |
| 19155 | 11231011 Calibrate | RATCHET 1/4 DRIVE Calibrate |
| 19156 | 112349 Calibrate | ANTENNA COUPLER Calibrate |
| 19157 | 112350 Calibrate | 112350;KIT;COUPLER SINGLE ANTENNA Calibrate |
| 19158 | 11239-1 Calibrate | TEMPERATURE TEST BREW CUP Calibrate |
| 19159 | 112391 Calibrate | TEMPERATURE TEST BREW CUP Calibrate |
| 19160 | 112399 Calibrate | PSDAF-KC46A FUEL QUANTITY INTERFACE TEST KIT Calibrate |
| 19161 | 1124 Calibrate | HOSES IN FT Calibrate |
| 19162 | 112401 Calibrate | MITUTOYO 112-401 CRIMP HEIGHT MICROMETER 0-25MM Calibrate |
| 19163 | 11247-50 Calibrate | CABLE BRACKET 50FT Calibrate |
| 19164 | 1124750 Calibrate | CABLE BRACKET 50FT Calibrate |
| 19165 | 1124750 Calibrate | CABLE PHOTOCELL Calibrate |
| 19166 | 1124750 Calibrate | CABLETRACKER50FT Calibrate |
| 19167 | 1124750 Calibrate | CABO OTICO 50 FT Calibrate |
| 19168 | 1124750 Calibrate | PHOTOCELL CABLE Calibrate |
| 19169 | 11249002001 Calibrate | SHEET, METAL Calibrate |
| 19170 | 11249002001 Calibrate | SHEET, METAL (2000 MM) - STONE FLOOR RE-MOVAL Calibrate |
| 19171 | 11249002001 Calibrate | SHEET, METAL (2000 MM) - STONE FLOOR REMOVAL Calibrate |
| 19172 | 11249002001 Calibrate | SHEET, METAL 2000 MM - STONE FLOOR RE-MOVAL Calibrate |
| 19173 | 11250 Calibrate | 1/4 COBALT THREADED SHANK DRILL Calibrate |
| 19174 | 11251-55 Calibrate | TIE DOWN RING Calibrate |
| 19175 | 1125155 Calibrate | TIE DOWN RING Calibrate |
| 19176 | 11257 Calibrate | "F" LONG COBALT THREADED DRILL BIT Calibrate |
| 19177 | 1126 Calibrate | HOSES IN FT Calibrate |
| 19178 | 11260007 Calibrate | HAND CRIMP TOOL JHTR1719C Calibrate |
| 19179 | 11260008 Calibrate | HAND CRIMP TOOL JHTR2262 Calibrate |
| 19180 | 11260167 Calibrate | HAND CRIMP TOOL JHTR5974 Calibrate |
| 19181 | 11261 Calibrate | "G" LONG COBALT THREADED DRILL BIT Calibrate |
| 19182 | 11262-1 Calibrate | POSITIONER 11-7771-11, SPR. LOADED Calibrate |
| 19183 | 112621 Calibrate | POSITIONER 11-7771-11, SPR. LOADED Calibrate |
| 19184 | 112684 Calibrate | ANTENNA Calibrate |
| 19185 | 1128 Calibrate | NOSE GEAR SAFETY LOCK ASSEMBLY Calibrate |
| 19186 | 1128-1 Calibrate | LANDING GEAR SAFETY LOCK PINS KIT Calibrate |
| 19187 | 1128-3 Calibrate | PIN,LOCK DOWN,NOSE LANDING GEAR TOOL Calibrate |
| 19188 | 11281 Calibrate | LANDING GEAR SAFETY LOCK PINS KIT Calibrate |
| 19189 | 11281 Calibrate | NLG DOOR SAFETY PIN Calibrate |
| 19190 | 1128200000 Calibrate | 28.5 VDC GROUND POWER UNIT Calibrate |
| 19191 | 1128200000 Calibrate | 7 28V DC DIESEL GPU Calibrate |
| 19192 | 1128200000 Calibrate | GPU Calibrate |
| 19193 | 1128200000 Calibrate | GPU 28.5V DIESEL Calibrate |
| 19194 | 1128200000 Calibrate | GPU, 28.5V DIESEL TIER IV Calibrate |
| 19195 | 1128200000 Calibrate | GPU, 28.5V DIESEL TIER IV (CE) Calibrate |
| 19196 | 1128200000 Calibrate | GPU, 28.5V DIESEL TIER IV, Calibrate |
| 19197 | 1128200000 Calibrate | GPU,28.5 V DIESEL TIER IV Calibrate |
| 19198 | 1128200000 Calibrate | TIER 4, 28.5 DIESEL GPU (28.5 VDC, 600 CONTINUOUS, 2,000 AMP PEAK) (CE) Calibrate |
| 19199 | 112820C Calibrate | GPU, 28.5 V, DIESEL Calibrate |
| 19200 | 112820CT3 Calibrate | GPU 28.5 VOLT- DIESEL (TRONAIR) Calibrate |
