| Part Number | Tool Description |
|---|
| 8001 | 0508941WK455S Calibrate | SEARCH UNIT Calibrate |
| 8002 | 0510C Calibrate | CARBIDE ROTORY Calibrate |
| 8003 | 0510HU Calibrate | CABLE - PMAT 2000 ANALYZER Calibrate |
| 8004 | 0514003101RK Calibrate | 1/2IN DR REPAIR KIT Calibrate |
| 8005 | 0517300 Calibrate | FUEL DRAIN CUP CESSNA 172 Calibrate |
| 8006 | 05205 Calibrate | #6 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8007 | 05207 Calibrate | #8 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8008 | 05209 Calibrate | #10 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8009 | 05212 Calibrate | #13 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8010 | 05215 Calibrate | #16 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8011 | 05218 Calibrate | DRILL BIT # 19 Calibrate |
| 8012 | 05219 Calibrate | #20 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8013 | 05219 Calibrate | DRILL BIT #20 Calibrate |
| 8014 | 05220 Calibrate | #21 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8015 | 0522028 Calibrate | AMSAFE RESTRAINT SYSTEM (SOARS) Calibrate |
| 8016 | 0522028 Calibrate | AMSAFE RESTRAINT SYSTEM (SOARS) [MFR MODEL# K7336] Calibrate |
| 8017 | 0522028 Calibrate | AMSAFE TESTER Calibrate |
| 8018 | 0522028 Calibrate | AMSAFERESTRA NTS (SOARS) MFR MODEL#K7336 Calibrate |
| 8019 | 05225 Calibrate | DRILL BIT # 25 Calibrate |
| 8020 | 05229 Calibrate | #30 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8021 | 05229 Calibrate | DRILL BIT #30 Calibrate |
| 8022 | 05239 Calibrate | #40 COBALT 6 AIRCRAFT EXTENSION Calibrate |
| 8023 | 0530051100 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, NO LONGER AVIALABLE Calibrate |
| 8024 | 0530053400 Calibrate | HYDRAULIC UNIT Calibrate |
| 8025 | 0530053400 Calibrate | HYDRAULIC UNIT (05 GPM) Calibrate |
| 8026 | 0530101100 Calibrate | CART. HYDR. GROUND POWER Calibrate |
| 8027 | 0530101100 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, NO LONGER AVIAIBLE Calibrate |
| 8028 | 0530101100 Calibrate | HYDRAULIC POWER CARD 3000 PSI 60 HZ Calibrate |
| 8029 | 0530101100 Calibrate | HYDRAULIC UNIT (TRON AIR) Calibrate |
| 8030 | 0532-V4-G21DX Calibrate | GAST PUMP Calibrate |
| 8031 | 0532V4G21DX Calibrate | GAST PUMP Calibrate |
| 8032 | 0545009 Calibrate | PROBE Calibrate |
| 8033 | 0545010 Calibrate | UNIT-SEARCH Calibrate |
| 8034 | 0545013 Calibrate | PROBE Calibrate |
| 8035 | 0545015 Calibrate | PROBE Calibrate |
| 8036 | 0545016 Calibrate | SEARCH UNIT Calibrate |
| 8037 | 055046B Calibrate | TOOL Calibrate |
| 8038 | 05527 Calibrate | SANDING DISK Calibrate |
| 8039 | 05528 Calibrate | SANDING DISK Calibrate |
| 8040 | 0560-6220 Calibrate | TESTO 622 Calibrate |
| 8041 | 05606220 Calibrate | TESTO 622 Calibrate |
| 8042 | 056484 Calibrate | TOOL CASE Calibrate |
| 8043 | 056928 Calibrate | 5710440-00-11 Calibrate |
| 8044 | 057-0289-00 Calibrate | EXTRACTOR H130 Calibrate |
| 8045 | 057-0289-00A Calibrate | CONNECTOR REMOVAL / EXTRACTION TOOL Calibrate |
| 8046 | 057-0289-00B Calibrate | EXTRACTION TOOL Calibrate |
| 8047 | 057-0590-80 Calibrate | DISMOUNTING RECEPTACLE TOOL Calibrate |
| 8048 | 057-0699-00B Calibrate | INSERTION TOOL Calibrate |
| 8049 | 057-0750-00 Calibrate | COMPRESSION STRAP WRENCH Calibrate |
| 8050 | 057-0820-00 Calibrate | INSERTION TOOL Calibrate |
| 8051 | 057-0852-29 Calibrate | ADAPTER, WRENCH Calibrate |
| 8052 | 057-0853-29 Calibrate | DEUTSCH ADAPTER, WRENCH Calibrate |
| 8053 | 057-0853-42 Calibrate | ADAPTER, WRENCH Calibrate |
| 8054 | 057-0854-00 Calibrate | DEUTSCH WRENCH, FASTENING – PRESURE SEALS Calibrate |
| 8055 | 057-0898-00 Calibrate | FASTENING WRENCH Calibrate |
| 8056 | 057-0901-03 Calibrate | TORQUE WRENCH ATTACHMENT Calibrate |
| 8057 | 057-0902-04 Calibrate | DYNANOMETRIC ARM Calibrate |
| 8058 | 057-0983-00 Calibrate | DEUSTCH EXTRACTION TOOL Calibrate |
| 8059 | 0570081100 Calibrate | HPU, 5606-83282 Calibrate |
| 8060 | 0570081100 Calibrate | HYDRAULIC POWER CART, 6 GPM 1750 PSI Calibrate |
| 8061 | 0570081100 Calibrate | USED 5606 HPU - TRONAIR 05-7008-1100 - 6 GPM / 1800 PSI Calibrate |
| 8062 | 0570083400 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, Calibrate |
| 8063 | 0570221100 Calibrate | HYDRAULIC TEST RIG Calibrate |
| 8064 | 0570221100 Calibrate | USE 05-7022-1110=8G, HPU - INCLUDE VOLTAGE 0PTI0N Calibrate |
| 8065 | 0570231100 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, Calibrate |
| 8066 | 0570233400 Calibrate | HYDRAULIC POWER UNIT Calibrate |
| 8067 | 0570243600A3 Calibrate | HYDRAULIC GROUND UNIT Calibrate |
| 8068 | 0570243600A3 Calibrate | HYDRAULIC POWER UNIT Calibrate |
| 8069 | 0570243600A3 Calibrate | TOOL Calibrate |
| 8070 | 0570243600A3 Calibrate | HYDRAULIC POWER UNIT Calibrate |
| 8071 | 0570253600 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, Calibrate |
| 8072 | 0570253600 Calibrate | HYDRAULIC MULE Calibrate |
| 8073 | 057028900 Calibrate | EXTRACTOR H130 Calibrate |
| 8074 | 057028900 Calibrate | MISC TOOL Calibrate |
| 8075 | 057028900A Calibrate | CONNECTOR REMOVAL / EXTRACTION TOOL Calibrate |
| 8076 | 057028900A Calibrate | EXTRACTOR Calibrate |
| 8077 | 057028900A Calibrate | INSERT EXTRACT TOOL ( 00A DENOTES LONG HANDLE ) Calibrate |
| 8078 | 057028900A Calibrate | TOOL, EXTRACTION Calibrate |
| 8079 | 057028900B Calibrate | EXTRACTION TOOL Calibrate |
| 8080 | 057028900B Calibrate | TOOL Calibrate |
| 8081 | 0570441210 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, Calibrate |
| 8082 | 0570441210 Calibrate | HYDRAULIC SERVICE UNIT --- MODELS 5020 AND 5110 Calibrate |
| 8083 | 0570441210 Calibrate | HYDRAULIC SERVICE UNIT,220V AC Calibrate |
| 8084 | 0570461210 Calibrate | HPU - INCLUDE VOLTAGE 0PTI0N, Calibrate |
| 8085 | 057059080 Calibrate | DISMOUNTING RECEPTACLE TOOL Calibrate |
| 8086 | 057059080 Calibrate | TE CONNECTIVITY Calibrate |
| 8087 | 057069900B Calibrate | INSERTION TOOL Calibrate |
| 8088 | 057075000 Calibrate | COMPRESSION STRAP WRENCH Calibrate |
| 8089 | 057075000 Calibrate | DEUTSCH HARNESS SHAPING TOOL Calibrate |
| 8090 | 057075000 Calibrate | HARNESS SHAPING TOOL Calibrate |
| 8091 | 057082000 Calibrate | INSERTION TOOL Calibrate |
| 8092 | 057085229 Calibrate | ADAPTER, WRENCH Calibrate |
| 8093 | 057085229 Calibrate | ADAPTER,WRENCH,SZ 29 Calibrate |
| 8094 | 057085229 Calibrate | WRENCH ADAPTER SIZE 29 Calibrate |
| 8095 | 057085329 Calibrate | DEUTSCH ADAPTER, WRENCH Calibrate |
| 8096 | 057085342 Calibrate | ADAPTER, WRENCH Calibrate |
| 8097 | 057085342 Calibrate | DEUTSCH ADAPTER, WRENCH Calibrate |
| 8098 | 057085400 Calibrate | DEUTSCH WRENCH, FASTENING – PRESURE SEALS Calibrate |
| 8099 | 057085400 Calibrate | WRENCH, FASTENING - PRESSURE SEALS Calibrate |
| 8100 | 057089800 Calibrate | FASTENING WRENCH Calibrate |
| 8101 | 057089800 Calibrate | ROTATION LOCKING TOOL Calibrate |
| 8102 | 057090103 Calibrate | TORQUE WRENCH ATTACHMENT Calibrate |
| 8103 | 057090204 Calibrate | DYNANOMETRIC ARM Calibrate |
| 8104 | 057098300 Calibrate | DEUSTCH EXTRACTION TOOL Calibrate |
| 8105 | 05722034 Calibrate | ROOM TEMP/HUMIDITY ANALYZER Calibrate |
| 8106 | 05722034 Calibrate | ROOM TEMP/HUMIDITY ANALYZER Calibrate |
| 8107 | 057840099 Calibrate | SCHRADER 5784 Calibrate |
| 8108 | 0580001-1 Calibrate | BOX Calibrate |
| 8109 | 05800011 Calibrate | BOX Calibrate |
| 8110 | 05800011 Calibrate | FUEL QUANTITY TEST BOX Calibrate |
| 8111 | 0580106400 Calibrate | COUPLING, Calibrate |
| 8112 | 0580106400 Calibrate | HYDRAULIC COUPLING Calibrate |
| 8113 | 0580106400 Calibrate | KIT, HYDRAULIC COUPLING Calibrate |
| 8114 | 058E607234D Calibrate | DOOR JIGGING TOOL Calibrate |
| 8115 | 058PSI Calibrate | 0-58PSI GAUGE TOOL Calibrate |
| 8116 | 058PSI Calibrate | MANOMETER Calibrate |
| 8117 | 059-C111-100 Calibrate | GAS MONITOR Calibrate |
| 8118 | 059C111100 Calibrate | GAS MONITOR Calibrate |
| 8119 | 05K22680 Calibrate | CILINDER KIT Calibrate |
| 8120 | 05PSKT3000 Calibrate | PERMASWAGE TOOL KIT Calibrate |
| 8121 | 06-011 Calibrate | DEVICE, STRUT SERVICING Calibrate |
| 8122 | 06-11700 Calibrate | NITROGEN CHARGER CONNECTOR Calibrate |
| 8123 | 06-134724-000 Calibrate | HIGH POWER ALLIGATOR YOKE RIVETERS ( REACH: 1-1/2" )( MAXIMUM FORCE @ 90 PSI: 9000 LBS )( CAPACITY ( Calibrate |
| 8124 | 06-134724-003 Calibrate | CONTACT PIN Calibrate |
| 8125 | 06-2-N-2316 Calibrate | FINISH REAMER Calibrate |
| 8126 | 06-22-19857-02 Calibrate | TEST SET - VALVE ACTUATING Calibrate |
| 8127 | 06-302 Calibrate | 3/32 COBALT 12 AIRCRAFT EXTENSION Calibrate |
| 8128 | 06-304 Calibrate | 1/8 COBALT 12 AIRCRAFT EXTENSION Calibrate |
| 8129 | 06-306 Calibrate | 5/32 COBALT 12 AIRCRAFT EXTENSION Calibrate |
| 8130 | 06-308 Calibrate | BROCA EXTRA LONGA DE COBALTO-3/16" X 12" AERONAVE AÇO Calibrate |
| 8131 | 06-310 Calibrate | BROCA EXTRA LONGA DE COBALTO-7/32" X 12" AERONAVE AÇO Calibrate |
| 8132 | 06-312 Calibrate | BROCA EXTRA LONGA DE COBALTO-1/4" X 12" AERONAVE AÇO Calibrate |
| 8133 | 06-313 Calibrate | BROCA EXTRA LONGA DE COBALTO-5/16" X 12" AERONAVE AÇO Calibrate |
| 8134 | 06-314 Calibrate | BROCA EXTRA LONGA DE COBALTO-3/8" X 12" AERONAVE AÇO Calibrate |
| 8135 | 06-315 Calibrate | BROCA EXTRA LONGA DE COBALTO-15/32" X 12" AERONAVE AÇO Calibrate |
| 8136 | 06-316 Calibrate | BROCA EXTRA LONGA DE COBALTO-9/32" X 12" AERONAVE AÇO Calibrate |
| 8137 | 06-318 Calibrate | BROCA EXTRA LONGA DE COBALTO - 7/16" X 12" AERONAVE AÇO Calibrate |
| 8138 | 06-319 Calibrate | BROCA EXTRA LONGA DE COBALTO-1/2" X 12" AERONAVE AÇO Calibrate |
| 8139 | 06-320 Calibrate | BROCA EXTRA LONGA DE COBALTO-13/32" X 12" AERONAVE AÇO Calibrate |
| 8140 | 06-321 Calibrate | BROCA EXTRA LONGA DE COBALTO-11/32" X 12" AERONAVE AÇO Calibrate |
| 8141 | 06-4005-0500 Calibrate | POWER UNIT HAND PUMP TRONAIR Calibrate |
| 8142 | 06-4005-0501 Calibrate | HYD HAND PUMP Calibrate |
| 8143 | 06-4005-0511 Calibrate | COMPONENT PR TEST UNIT MB (CE) Calibrate |
| 8144 | 06-4005-0511 Calibrate | HYDRAULIC COMPONENT TEST UNIT (2 QT/1.9 LT) & (3,000 PSI/207 BAR) Calibrate |
| 8145 | 06-4005-0511 Calibrate | HYDRAULIC HAND PUMP (0-3000 PSI) Calibrate |
| 8146 | 06-4005-0520 Calibrate | COMPONENT P. TEST UNIT MB (CE) Calibrate |
| 8147 | 06-4005-0800 Calibrate | COMPONENT PR TEST VITON CE Calibrate |
| 8148 | 06-4005-3611 Calibrate | COMPONENT PR TEST UNIT PE (CE) Calibrate |
| 8149 | 06-4035-0500 Calibrate | CART, HYDRAULIC OIL SERVICING (MIL-PRF-5606) (8 US GAL.) Calibrate |
| 8150 | 06-4035-0800 Calibrate | FLUID SERVICE UNIT Calibrate |
| 8151 | 06-4035-3600 Calibrate | CART: HYD/OIL SVC UNIT, 8GL,MANUAL HAND PUMP Calibrate |
| 8152 | 06-40350500 Calibrate | HYDRAULIC SERVICE UNIT Calibrate |
| 8153 | 06-439-4 Calibrate | GAUGES.DUAL, BACR15FT Calibrate |
| 8154 | 06-439-5 Calibrate | GAUGE,DUAL, BACR15FT Calibrate |
| 8155 | 06-439-8 Calibrate | GAUGE,DUAL, BACR15FT Calibrate |
| 8156 | 06-5004-0500 Calibrate | CART, HYDRAULIC SERVICING Calibrate |
| 8157 | 06-5004-0500-A2 Calibrate | CART HYDRAULIC Calibrate |
| 8158 | 06-5004-3600 Calibrate | HYDRAULIC RESERVOIR SERVICE Calibrate |
| 8159 | 06-5004C0500 Calibrate | FLUID SERVICE UNIT Calibrate |
| 8160 | 06-5004C3600 Calibrate | 8 GALLON SKYDROL FLUID SERVICE UNIT Calibrate |
| 8161 | 06-5004C3600-A1 Calibrate | FLUID SERVICE UNIT(PE/CE) Calibrate |
| 8162 | 06-5009-6500 Calibrate | ENGINE RUST PREVENTIV TOOLS Calibrate |
| 8163 | 06-5009-6600 Calibrate | FLUID SERVICE UNIT Calibrate |
| 8164 | 06-5009-6800 Calibrate | CONTAINER OIL (PRESURIZADO) Calibrate |
| 8165 | 06-5009C6500 Calibrate | SERVICE UNIT, ENGINE OIL Calibrate |
| 8166 | 06-5009C6800 Calibrate | 2.5-GALLON ENGINE OIL SERVICE UNIT – 23699 & 87257 FLUIDS (CE) Calibrate |
| 8167 | 06-5010-0800 Calibrate | 2 GALLON FLUID SERVICE UNIT Calibrate |
| 8168 | 06-5010-6500 Calibrate | ENGINE OIL SERVICE UNIT Calibrate |
| 8169 | 06-5010-6600 Calibrate | FLUID SERVICE UNIT (PE)(CE) Calibrate |
| 8170 | 06-5010-6800 Calibrate | ENGINE OIL SERVICE CART (6 GAL/28 L) (CE) Calibrate |
| 8171 | 06-5020-3600 Calibrate | CART - SERVICE, HYDRAULIC SYSTEM Calibrate |
| 8172 | 06-5021-1500 Calibrate | CART E190 Calibrate |
| 8173 | 06-5021-1800 Calibrate | CART E191 Calibrate |
| 8174 | 06-5021-3600 Calibrate | CART - SERVICE, HYDRAULIC SYSTEM Calibrate |
| 8175 | 06-5022-6500 Calibrate | "SERVICING UNIT, ENGINE/VFG/APU OIL Calibrate |
| 8176 | 06-5022-6500 Calibrate | HYDRAULIC SERVICE UNIT (2 GAL/7.6 L) & (200 PSI/13.8 BAR) Calibrate |
| 8177 | 06-5022-6500 Calibrate | MALABAR SPERRY Calibrate |
| 8178 | 06-5022-6500-A6 Calibrate | RESVR SERVICE UNIT, PAO Calibrate |
| 8179 | 06-5022-6500-A7 Calibrate | UNIT – HAND CARRY HYD. OIL SERVICING (MIL-H-5606), 2 GALLONS U.S. Calibrate |
| 8180 | 06-5022-6500A6 Calibrate | SVC UNIT: RESERVOIR, Calibrate |
| 8181 | 06-5022-6500A7 Calibrate | RESERVOIR: MILITARY,UNIT,SERVICING Calibrate |
| 8182 | 06-5022-660 Calibrate | FLUID SERVICE UNIT Calibrate |
| 8183 | 06-5022-6600 Calibrate | "UNIT - HYDRAULIC RESERVOIR Calibrate |
| 8184 | 06-5022-6600 Calibrate | DISPENSADOR DE FLUIDOS SPERRY Calibrate |
| 8185 | 06-5022-6600 Calibrate | DISPENSER Calibrate |
| 8186 | 06-5022-6600 Calibrate | UNIT,HYDRAULIC RESERVOIR SERVICING Calibrate |
| 8187 | 06-5022-6800 Calibrate | CONTAINER OIL PUMP (ENGINE) Calibrate |
| 8188 | 06-5022-6800-A2 Calibrate | ENGINE OIL SERVICE UNIT Calibrate |
| 8189 | 06-5022-6C00 Calibrate | CONTROL COLUMN Calibrate |
| 8190 | 06-50226500 Calibrate | UNIT, OIL RESERVOIR SERVICING Calibrate |
| 8191 | 06-5024-3510 Calibrate | SVC UNIT: FL, Calibrate |
| 8192 | 06-5024-3610 Calibrate | CART - SERVICE, HYDRAULIC SYSTEM Calibrate |
| 8193 | 06-5024-3800 Calibrate | ENGINE OIL SERVICE UNIT Calibrate |
| 8194 | 06-5025-3610 Calibrate | HYDRAULIC RESERVOIR SERVICE CART WITH TOWBAR 68 GAL (257 L), 100 PSI (6.9 BAR) @ 5 GPM (18.9 LPM) Calibrate |
| 8195 | 06-5031-3600 Calibrate | CART - SERVICE, HYDRAULIC SYSTEM Calibrate |
| 8196 | 06-5038-9B00 Calibrate | CART, PAO SERVICE, Calibrate |
| 8197 | 06-5040-0510 Calibrate | HYDRAULIC SERVICE UNIT Calibrate |
| 8198 | 06-5041-0500 Calibrate | POWER UNIT: HAND PUMP, Calibrate |
| 8199 | 06-5041-0800 Calibrate | FLUID SERVICE UNIT (VITON) Calibrate |
| 8200 | 06-5041-3610 Calibrate | HYDRAULIC SERVICE UNIT (PE) Calibrate |
