Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
03-4007-0000 | TAIL STAND | 4 | |
03-4033-0000 | TAIL STAND | 4 | |
03-5800-0000 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-5800-0010 | TAIL STAND | 5 | |
03-5800C0010 | TAIL STAND | 7 | |
03-5802-0000 | TAIL STAND | 4 | |
03-5809-0000 | TAIL STAND | 4 | |
03-5809C0000 | TAIL STAND | 3 | |
03-5813-0000 | TAIL STAND | 2 | |
03-5815-0000 | TAIL STAND | 2 | |
03-5817-0000 | Tail stand | 4 | |
03-5819-0000 | TAIL STAND | 4 | |
03-5821-0000 | TAIL STAND | 5 | |
03-5822C0000 | TAIL STAND | 5 | |
03-5825-0110 | TAIL STAND | 3 | |
03-5826-0000 | TAIL STAND | 3 | |
03-5828-0000 | TAIL STAND | 6 | |
03-5829-0000 | TAIL STAND | 9 | |
03A4007-0000 | TAIL STAND | 3 | |
03A5800C0010 | TAIL STAND | 4 | |
03A5804C0010 | TAIL STAND | 6 | |
03A5809C0000 | TAIL STAND | 5 | |
03A5815C0010 | TAIL STAND | 2 | |
03A5817C0000 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03A5826-0000 | TAIL STAND | 4 | |
03A5829C0000 | TAIL STAND | 5 | |
03A5831-0000 | TAIL STAND | 2 | |
110.85.07.159 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2-168 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2-531-01 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C07013-1 | TAIL STAND | 7 | |
C07013-83 | TAIL STAND | 5 | |
CJMD107-004 | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB0700010 | TAIL STAND | 1 | |
GSB0700024 | TAIL STAND | 3 | |
PI-TS-208AL | TAIL STAND | 1 | |
RC12K | TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TMHAS01-00-00 | TAIL STAND | 7 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
(CALIB) 98V53809001000 | STAND-SUPP, TAIL CONE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98V53809002000 | STAND-SUPP, TAIL CONE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-4006-0000 | TAIL STAND UNIVRASL | 8 | |
03-4006-0000 | TAILSTAND W/ RISER | 8 | |
03-4007-0000 | STAND, TAIL CITATION I/II | 4 | |
03-4012-0000 | Stand, Tail Dash 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-4033-0000 | STAND, TAIL BEECHJET, DIAMOND | 4 | |
03-5800-0000 | STAND: TAIL,AIRCRAFT, USE 03-5800C0010=8G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-5800-0010 | TAILSTAND | 5 | |
03-5800C0010 | STAND, TAIL-VARIOUS (CE) | 7 | |
03-5800C0010 | AIRCRAFT TAIL STAND | 7 | |
03-5801-0010 | Stand, Tail Citation Iii | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-5802-0000 | TRONAIR 03-5802-0000 TAIL STAND | 4 | |
03-5804-0010 | STAND, TAIL KING AIR | 3 | |
03-5805-0000 | STAND, TAIL SAAB-340 | 1 | |
03-5806-0000 | TAIL STABILIZER JACK STAND | 2 | |
03-5808-0000 | Stand, Tail Casa/Wing Atp | 2 | |
03-5809-0000 | TAILSTAND | 4 | |
03-5809C0000 | Stand, Tail-Various (Ce) | 3 | |
03-5813-0000 | P180 TAIL STAND | 2 | |
03-5815-0000 | STAND, TAIL CITATIONJET (D) | 2 | |
03-5815C0000 | TAIL STAND: TRIPOD,CE, CITATION JET | 1 | |
03-5816-0000 | Stand, Tail J-41 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-5817-0000 | Stand, Tail Citation X | 4 | |
03-5819-0000 | STAND – TAIL | 4 | |
03-5820-0000 | Stand, Tail Dash 8-100/300 | 1 | |
03-5821-0000 | TAILSTAND:, | 5 | |
03-5822-0000 | REAR SUPPORT (TAIL STAND) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-5822C0000 | Stand, Tail-Various (Ce) | 5 | |
03-5825-0110 | Tailstand, Rj-700 | 3 | |
03-5826-0000 | STAND TAIL CESSNA E. | 3 | |
03-5828-0000 | REGULAR TAIL STAND | 6 | |
03-5829-0000 | STAND - TAIL SUPPORT | 9 | |
03-5840-0000 | ASSEMBLY, TAILSTAND (CE) | 2 | |
03-5842C4000 | Tailstand, Flyaway (Ce) | 4 | |
03-5851-0000 | TAILSTAND, HONDAJET | 1 | |
03-8016-0010 | TAIL STAND (TRONAIR) | 1 | |
03-8127-0000 | Dash 8 Tailstand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03-A5800C0010 | TAIL STAND W/ALARMA | 4 | |
038 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
039 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03A4007-0000 | STAND, TAIL W/ALARM, | 3 | |
03A5800C0010 | Tailstand with Alarm | 4 | |
03A5801C0010 | Stand, Alarm Tail (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03A5802C0000 | ALARM STAND, TAIL CE | 4 | |
03A5804C0010 | STAND, TAIL KING AIR | 6 | |
03A5809C0000 | TAILSTAND W/ALARM | 5 | |
03A5815C0010 | Tailstand, W/ Alarm (Ce) | 2 | |
03A5817C0000 | Stand, Tail W/Alarm Citation X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
03A5822C0000 | TAIL STAND: TRIPOD JACK, STOCKED AT 1041 | 4 | |
03A5826-0000 | STAND, TAIL CESSNA EXCEL | 4 | |
03A5828C0000 | STAND, TAIL W/ALARM (CE) | 2 | |
03A5829C0000 | TAIL STAND: TRIPOD,JACK | 5 | |
03A5831-0000 | STAND, TAIL W/ALM SOVERGN (CE) | 2 | |
03A5840C0000 | JACK: TRIPOD,TAIL STAND,CE, | 2 | |
03A5845C0000 | Tailstand W/Alarm, Legacy 500 | 1 | |
03A5846C0100 | TAILSTAND, 1TON W/ALARM | 2 | |
03A5849C0000 | TAILSTAND W/ALARM, | 1 | |
03−5828−0000 | Tail Stand − Regular | 6 | |
04-6034-1100 | TAIL ACCESS STAND | 2 | |
07X-10-06 | REAR SUPPORT (TAIL STAND) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0899.00 | TAIL STABILIZER JACK STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1002 | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, 6AL-4V | 5 | |
1002-321 | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1002-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG12 FIG14 DETAIL4, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1003 | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, 6AL-4V | 6 | |
1003-321 | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1003-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG13 FIG14 DETAIL 5, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1004 | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, 6AL-4V | 6 | |
1004-321 | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1004-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG14 FIG14 DETAIL6, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005 | BOEING STANDARD, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, 6AL-4V | 6 | |
1005-321 | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, 321 SS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-INCONEL | Boeing Standard, 747 PT6 51-00-00:PG15 FIG14 DETAIL7, INCONEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.07 | Reference Standard, DC-10 SID PSE53.10.055/.056:PG1 DETAIL1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.15a | DC-10 SID REFERENCE STANDARD DETAILS -3,-5 & -7 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.15b | DC-10 SID REFERENCE STANDARD DETAILS -3,-5, & -5, -501 ASSEMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.15c | DC-10 SID REFERENCE STANDARD DETAILS -7, -9 & -11, -503 ASSWMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.17 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.17.1 | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.21 | DC-10 REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 718 INCONEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.23 | DC-10 SID REFERENCE STANDARD 54.10.029/.030. DETAIL -1 SHEET 1 PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.25a | DC-10 SID REFERENCE STANDARD 57.10.029/.030. DETAIL -3 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.25b | DC-10 SID REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.25c | DC-10 SID REFERENCE STANDARD DETAIL -5 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.26.2 | DC10 Reference Standard, PSE 54.10.031/.032: -505 DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.27b | DC-10 SID REFERENCE STANDARD DETAILS -7,-9 & -11 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.31A | DC10 Standard, PSE 54.10.027:-1DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.31B | DC10 Standard, PSE 54.10.027:-2DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.32 | DC10 Standard, PSE 54.10.027:-3DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.33A | DC10 Standard, PSE 54.10.027:-5DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.33B | DC10 Standard, PSE 54.10.027:-6DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.35 | DC10 Standard, PSE 54.10.027:-501DETAIL SHEET1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.36a | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.36aN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.36b | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.36bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.39.1 | DC-10 SID REFERENCE STANDARD DETAIL -1, -3 & -5 PAGE 1-5. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10RS.bN | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1159-20000-1 HE16 | STAND TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
121G830077-001 | TAIL ROTOR TRANSMISSION ASSEMBLY STAND PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
125 | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
126-1 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV or CASA CN235 PT1 51-30-04:PG10 FG4 *with .040 deep notch | 2 | |
126-2024T3 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 2024-T3 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
126-4340 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV, Steel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
126-7075T6 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 7075-T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
127-.032 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.036 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.040 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.072 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.090 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127-.125 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG6 DETAIL1 | 1 | |
127A-.032 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.036 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.040 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.050 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.063 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.072 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.080 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.090 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.100 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.110 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
127A-.125 | Boeing Standard, 737/747 PT6 51-00-00 FIG5:PG7 DETAIL2 | 1 | |
130-.300 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .300" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130-.330 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .330" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130-.335 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .335" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130-.350 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .350" Nominal | 1 | |
130-.360 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .360" Nominal | 2 | |
130-.370 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .370" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130-.380 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .380" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130-.600 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .600" Nominal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
130A | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI | 2 | |
130B | BOEING THICKNESS STANDARD FOR C-BAND RADOMES DETAIL V 737 PT 6 53-50-00. MATERIAL: LUCITE. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
130C | Boeing Standard, ALL PT6 53-50-00:PG13 FIG1 DETAIL VI (same as NDT706P) | 2 | |
134 | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. | 4 | |
185 | BOEING STANDARD, 747 PT6 51-00-00:PG11 FIG13 DETAIL IVCASA CN235 PT1 51-30-05 PG10 FG4 | 2 | |
18502 | TAIL WORK STAND 6 METERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
186A | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .1875 hole dia. | 3 | |
186A-F | Boeing Standard, 737/747 PT6 51-00-00:PG6 FIG1 DETAILII, 2 LAYERS/6 HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
186B | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .2500 hole dia. | 3 | |
186C | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .3125 hole dia. | 4 | |
186D | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .3750 hole dia. | 4 | |
186E | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .4375 hole dia. | 4 | |
186F | Boeing Standard, 737/747 PT6 51-00-00:PG8 FIG11 DETAIL III .5000 hole dia. | 3 | |
188A | BOEING STANDARD,737 PT6 51-00-00:PG12 FIG4 DETAIL VI | 5 | |
188A-2024T3 | Boeing Standard,737 PT6 51-00-00:PG12 FIG4 DETAIL VI, 2024-T3 Aluminum | 1 | |
194A-.312/.375 | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, 5/16 and 3/8 holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
194LH | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, .072" plates | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
25G3178001-001 | ANCHORING SUPPORT FOR TAIL STAND | 3 | |
25W991020-501 | ADJUSTABLE TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-73-000-2 | FEDEX TAIL STAND JACK SVC FITTING | 1 | |
332A91-2475-00 | TAIL BOOM STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A91-3301-02 | TGB STAND/ TAIL MECHANICAL BASE SUPPORT | 1 | |
35-93152-0001 | STAND, TAIL MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
350А91330000 | STAND FOR THE TAIL GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
360A913300.00 | MOUNTING STAND & TAIL ROTOR RETAINER | 1 | |
365 | BOEING REFERENCE STANDARD 737 PART 4 71-20-01 PG.4 FIGURE 1 DETAIL I. Includes Test Report and Certificate of Conformance. | 4 | |
365A91-2345-01 | TAIL BOOM STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
365A91-2346-00 | TAIL BOOM REST STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
365A96-3355-00 | TAIL ROTOR STAND FITTING | 1 | |
375 | ALPHA AVIATION MODEL#375 STANDARD AIRCRAFT TAIL PO | 2 | |
737-800 TAIL STANDS | 737-800 TAIL STANDS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
761 | TAIL JACK STAND | 3 | |
76100-5 | TAIL JACK STAND | 1 | |
80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
900076 | PLATFORM - SINGLE TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A53508524000 | STAND-SUPPORT,TAIL CONE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D07103000001 | SAFETY TAILSTAND DYNOMETER | 10 | |
98D07103001044 | TAIL STAND JACK | 2 | |
98S07003000001 | JACK PADS WING AND TAIL STAND (3) | 16 | |
98V53809001000 | STAND SUPPORT TAIL CONE | 2 | |
98V53809002000 | STAND-SUPP TAIL CONE | 1 | |
AA1-400 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), WINTER USE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AA1-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (standard tail), ALL YEAR USE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-01830-401 | STAND, STABILIZING-TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ANDT1015 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1049 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1050 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1051 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 4 | |
ANDT1052 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1053 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 5 | |
ANDT1054 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1055 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1056 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 4 | |
ANDT1057 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 3 | |
ANDT1077 | Boeing Standard, 737 PT6 53-30-00:PG6 FIG5 DETAIL1 | 4 | |
ANDT2007 | Boeing Standard, PT6 53-10-27 PG456 Fig 48 Sheet8 Detail IV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ANDT4126 | BOEING REFERENCE STANDARD, 747 PT6 53-30-00:PG5 FIG6 DETAIL I | 2 | |
ATEC01 | TUBE: SLIDE,JACK,28IN TO 47IN, TAIL JACK/STAND | 1 | |
ATS | MEYER HYDRAULICS ATS Tail Stand | 1 | |
ATSAA72 | EXTENSION: TAIL STAND, | 1 | |
AW139 TAIL STAND | AW SMART ACCESS TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B-1 | TRANSIENT TAIL MAINTENANCE STAND | 6 | |
B535P0002951 | TAIL BOOM STAND COMPLETE, ADAPTOR KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C07013-1 | TAIL STAND - AFT FUSELAGE JACKING POINT | 7 | |
C07013-64 | TAIL STAND-AFT FUSELAGE JACKING POINT | 1 | |
C07013-83 | TAIL STAND - AFT FUSELAGE JACKING POINT | 5 | |
C07013-CRATE | Box / Crate for Tailstand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C07013-LIGHT | Light for Tail Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C6GT1014-27 | C6GT1014-27 BASE-TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C6GTM1015-27 | LUG -TAIL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CS-295-12VTP | TAIL MAINTENANCE STAND | 1 | |
D04020K3D1E01B0 | HYDRO Standard B787 Tail Tripod Jack | 1 | |
D102P10A0101 | TAIL BOOM STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D535P0002101 | BLADE & TAIL BOOM STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EFE1511868 | FANCASE STANDS- detail 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F84ED00012 | STAND-TAIL PLUG_[F84ED00012] | 1 | |
FEN06 | STANDARD TRIPOD-JACK SET A320 FAMILY INCL. NEO - TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FEN06A21 | HYDRO Standard A320 Family Tail Tripod Jack | 1 | |
FEN121 | STANDARD B737 TAIL TRIPOD JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FEN121A21 | HYDRO Standard B737 Tail Tripod Jack | 1 | |
GROO-03-35-00100-0001 | TAIL MAINTENANCE STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB0700010 | STAND-TAIL SUPPORT | 1 | |
GSB0700011 | STAND-TAIL SUPPORT | 1 | |
GSB0700024 | TAILSTAND | 3 | |
HS0603K2D1B01B0 | HYDRO Standard A330/A340-200/ -300 Tail Stanchion | 1 | |
HST917250 | STAND FUSELAGE TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-3864 | TAILSTAND ALARM KIT | 3 | |
L535P0001051 | TAIL BOOM STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L642G1002101 | MOUNTING STAND & TAIL ROTOR RETAINER | 1 | |
MD 80 TAIL STAND | STAND, LIGHT WEIGHT TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS42 | TAILSTAND | 1 | |
NDT1016 | Boeing Standard .188" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
NDT1016 3.2-5.5MM | Special Boeing Type Reference Standard, PT6 51-00-00 PG 10, Fig 16 Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1017 | Boeing Standard .250" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
NDT1018 | Boeing Standard .313" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
NDT1019 | Boeing Standard .375" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 3 | |
NDT1020 | Boeing Standard .438" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
NDT1021 | Boeing Standard .500" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 2 | |
NDT1022-2.0 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1031 | BOEING 707 REFERENCE STANDARD 707 PART 6, 57-10-07 DETAIL 2 FIGURE 93 SHEET 7 PG.1525. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
NDT1040 | Boeing Standard 0.188" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
NDT1041 | Boeing Standard 0.250" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
NDT1042 | BOEING STANDARD 0.313" HOLE, 51-00-00, PT6: FIG.19, PAGE 10, DETAIL III | 2 | |
NDT1043 | Boeing Standard 0.375" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
NDT1044 | Boeing Standard 0.438" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
NDT1045 | Boeing Standard 0.500" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | 2 | |
NDT1047A | Boeing Standard, 747 PT6 51-00-00:PG6 FIG22 DETAILI, 7075T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1048 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV | 4 | |
NDT1048-2024T3 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 2024-T3 Aluminum | 1 | |
NDT1048-7075T6 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 7075-T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1061 | Boeing Standard, 737 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
NDT1062 | Boeing Standard, 737 PT6 51-00-00:PG11 FIG24 DETAILV | 2 | |
NDT1072 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG13 DETAIL IV | 2 | |
NDT1073 | BOEING STANDARD, 747 PT6 51-00-00:PG12 FIG13 DETAILV | 2 | |
NDT1074 | BOEING STANDARD, 747 PT6 51-00-00:PG11 FIG24 DETAILV | 2 | |
NDT1075 | Boeing Standard, 737 PT6 51-00-00: PG14 FIG13 DETAILVII | 2 | |
NDT1083-.851 | Boeing Standard .851 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083-1.00 | Boeing Standard 1.0", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083-1.1875 | Boeing Standard 1.1875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083-1.19 | Boeing Standard 1.19", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083-1.25 | Boeing Standard 1.25", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.157 | Boeing Reference Standard 0.157" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.219 | Boeing Reference Standard 0.219" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.282 | Boeing Reference Standard 0.282" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.344 | Boeing Reference Standard 0.344" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.407 | Boeing Reference Standard 0.407" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.469 | Boeing Reference Standard 0.469" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.516 | Boeing Reference Standard 0.516" Hole, 51-00-00, PT6: Fig.19, Page 10, Detail III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.5625 | Boeing Standard 0.5625", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.563 | Boeing Standard 0.563", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.625 | Boeing Standard 0.625", 737/747 PT6 51-00-00:FIG19 PG10 Detail III or 757/767 PT6 51-00-17:PG7 FIG3 | 1 | |
NDT1083.6875 | Boeing Standard 0.6875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.750 | Boeing Standard 0.750", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1083.875 | Boeing Standard 0.875", 737/747 PT6 51-00-00:FIG19 PG10 DetailIII or 757/767 PT6 51-00-17:PG7 FIG3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.0625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII, .0625 (1/16") Diameter Hole | 1 | |
NDT1084-.125 | Boeing Standard .125 hole 737/747 PT 6 51-00-00 PH10 FIG 16 DETAIL III | 1 | |
NDT1084-.156 | Boeing Standard .156" Hole, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.157 | BOEING STANDARD .157" HOLE, 737/747 PT6 51-00-00:PG10 FIG16 DETAIL III | 1 | |
NDT1084-.218 | Boeing Standard .218: Hole,737/747 PT6 51-00-00: PG 10 FIG 16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.562 | Boeing Standard .562" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.563 | Boeing Standard .563" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
NDT1084-.625 | Boeing Standard, .625" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
NDT1084-.688 | BOEING STANDARD, .688" HOLE, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | 1 | |
NDT1084-.689 | Boeing Standard, .689" Hole, 737/747 PT6 51-00-00: PG10 FIG16 DETAIL III | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-.750 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII .750" HOLE DIAMETER | 1 | |
NDT1084-.813 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084-.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII .875" hole diameter | 1 | |
NDT1084-.938 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084-1.00 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.0" hole diameter | 1 | |
NDT1084-1.125 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.125" hole diameter | 1 | |
NDT1084-1.200 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.200" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.250 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.250" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.375 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.375" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.390 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.390" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.420 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.420" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.500" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.590 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.590" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.625" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.750 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 1.75" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.750-7075T6 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 7075T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.795 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.795" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-1.875 | BOEING REFERENCE STANDARD, PT6 51-00-00: FIG16 PG10 DETAILIII 1.875" HOLE DIAMETER | 1 | |
NDT1084-1.985 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 1.985" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-2.00 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.0" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084-2.650 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII 2.650" hole diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.125 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.156 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.157 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.158 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.188 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.195 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.218 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.219 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.245 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.250 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.275 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.281 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.282 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.297 | Boeing Reference Standard, 19/64" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.313 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.343 | Boeing Reference Standard, 11/32" Hole, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.344 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.407 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.469 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.500 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.531 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.547 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.562 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1084.625 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.688 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.750 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1084.875 | Boeing Reference Standard, PT6 51-00-00: FIG16 PG10 DETAILIII | 1 | |
NDT1087-1 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .050" over .040" | 4 | |
NDT1087-2 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .071" over .040" | 3 | |
NDT1087-3 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | 3 | |
NDT1087-4 | Boeing Standard, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .090" over .040" | 3 | |
NDT1087-R&D | Boeing Standard w/ 12 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1087-R&D V2 | Boeing Standard w/ 9 NOTCHES, 737/747 PT6 53-30-00:PG10 FIG9 DETAIL II, .080" over .040" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-.656 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII .656 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-.750 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII .750 Diameter | 1 | |
NDT1089-1.00 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.0 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-1.25 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.25 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-1.375 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.375 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-1.438 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.438 Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1089-1.500 | Boeing Standard, ALL PT6 51-00-00:PG10 FIG17 DETAILIII 1.5" Diameter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1091 | Boeing Standard, PT6 51-00-00:PG7 FIG15 DETAIL I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT126 | Boeing Standard, 747 PT6 51-00-00 PG10: FIG23, DETAIL IV or CASA CN235 PT1 51-30-04:PG10 FG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT185 | Boeing Standard, 747 PT6 51-00-00:PG11 FIG13 DETAIL IV or CASA CN235 PT1 51-30-05 PG10 FG4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT189 | BOEING STANDARD,737 PT6 51-00-00:PG13 FIG4 DETAIL | 2 | |
NDT192 | Boeing Standard, 737 PT6 51-00-00:PG14 FIG13 DETAIL VII | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT2019 | BOEING REFERENCE STANDARD 727 PT 6 57-40-27 DETAIL II. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PI-TS-208AL | AIRCRAFT TAIL STAND | 1 | |
QO-QTS-TI-03-001 | Air Force reference standard Detail#1. Material 7075-T6 Aluminum. EDM Notch size: .050" x .050" x .005" Max Width, 10 Flaws total. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC12K | TAIL STAND (03-5804-0010) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Tail Stands | 2 off Tail Stands | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WORK STAND (TAIL) | WORK STAND (TAIL) 7.5 FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.