Tool Description: 075



Partial Match
Tool #
Description
In Stock
Our Sources
For Aircraft*
Photos
Add to Request
AFNDT-3484AL
AFNDT-3484AL
Description:  Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3485AL
AFNDT-3485AL
Description:  Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3488/AL
AFNDT-3488/AL
Description:  5 STEP WEDGE .032", .064", .128", .256", .500". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH HOLDING BLOCK. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3491AL
AFNDT-3491AL
Description:  METRIC 6 STEP WEDGE. STEP SIZE: 0.6mm, 1mm, 3mm, 7mm, 13mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3492AL
AFNDT-3492AL
Description:  METRIC 5 STEP WEDGE: STEP SIZE: 2mm, 5mm, 10mm, 15mm, 20mm +/- .03mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Includes Test Report Traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3493AL
AFNDT-3493AL
Description:  7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .200", .300", .400", .500", .600", .700" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3503AL
AFNDT-3503AL
Description:  Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; .154" (3.9mm), .189" (4.8mm) .217"(5.50mm), .248"(6.3mm), .281"(7.13mm), .312"(7.92mm), .344" (8.71mm), .375"(9.52mm), .437" (11.09mm), .500"(12.7mm), .562" (...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3506
AFNDT-3506
Description:  SINGLE HOLE REFERENCE STANDARD, HOLE SIZE 3.0", EDM CORNER NOTCH: .030" x .030" x .005 ± .002", MID-WALL NOTCH:.060" x .030" DEEP +/-.002". MATERIAL: 7075-T6 DIMENSIONS: 4.0" x 4.0" x 0.5" Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3509
AFNDT-3509
Description:  SINGLE HOLE REFERENCE STANDARD, HOLE SIZE 27.7mm(1.090"), EDM CORNER NOTCH: .030" x .030" x .005 ± .002", MATERIAL: 7075-T6 DIMENSIONS: 3.0" x 3.0" x 0.5" Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3513AL
AFNDT-3513AL
Description:  SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2"...- Number of holes 11;..- hole diameters: 14.0mm, 14.2mm, 14.4mm, 14.6mm, 15.6mm, 15.8mm, 16.1mm, 16.2mm, 16.3mm, 16.6mm, 16.9mm...EDM notch in each hole: thru ...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3514AL
AFNDT-3514AL
Description:  5 STEP WEDGE .075", .150", .225", .300", .375". TOLERANCE +/-.001". MATERIAL: 7050-T7 ALUMINUM. PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. Meets ASTM E797/797M
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3517/7075
AFNDT-3517/7075
Description:  10 STEP WEDGE. STEP THICKNESS OF , .025", .050", .100", .200", .300", .400", .500", .600", .800" 1.000" +/-.03mm Pad Size: 12.5mm" x 25mm" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3521AL
AFNDT-3521AL
Description:  5 STEP METRIC WEDGE , 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3522AL
AFNDT-3522AL
Description:  CUSTOM EDDY CURRENT SURFACE REFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .006" ±.001". MATERIAL: 7075-T6 ALUMINUM. SIZE: .312" THICK x 1.375 WIDE x 3.156". Includes Test Report and Certifictate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3523AL
AFNDT-3523AL
Description:  4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3524AL
AFNDT-3524AL
Description:  4 HOLE REFERENCE STANDARD. Material: 7075-T6 Aluminum 10" x 3.5" x .375" , HOLE SIZES: 1.25", 1.50", 1.75", 2.00". EDM NOTCH: .030" x .030" x .005 ± .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3536AL
AFNDT-3536AL
Description:  METRIC 5 STEP WEDGE. STEP SIZES: 12.5mm, 16mm, 20mm, 25mm, 30mm STEP TOLERANCE +/-.03mm(.00118"). MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 25mm x .25mm. Includes Test Report traceable to NIST, Mill Certificate for Material and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3541AL
AFNDT-3541AL
Description:  EDDY CURRENT SURFACE STANDARD MANUFACTURED TO BSS 7698,..3 EDM NOTCHES: ( .010", .020", .030" Deep x .005" Wide ± .001 ), MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3542AL
AFNDT-3542AL
Description:  METRIC 5 STEP WEDGE 0.6mm(.024"),5.44mm( .214"),10.26mm( .404"),15.09mm( .594"), 20mm(.787"). TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certif...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3545AL
AFNDT-3545AL
Description:  Custom 4 Step Flat Bottom Hole CRS. Step Thicknesses of 2mm, 3mm, 6mm, 15mm. 12 total Flat Bottom Holes 1.2mm(.047")Ø (Tolerance: ± 3% ). Pad Size: WIDTH 40mm ± 1mm x LENGTH 60mm ± 0.2mm. Material: 7075-T6 Aluminum anodized for corrosion protection....
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3546AL
AFNDT-3546AL
Description:  EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHE SIZES: .005"(.127mm) , .020"(0.5mm), .050"(1.27mm) (.005"W +/- .001). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3548/7075
AFNDT-3548/7075
Description:  5 STEP WEDGE, 1mm, 3mm, 5mm, 7mm, 10mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square supplied with Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3558/7075T6
AFNDT-3558/7075T6
Description:  10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3559AL-3
AFNDT-3559AL-3
Description:  15 HOLE REFERENCE STANDARD, Material: 7075-T6 Aluminum. Hole Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.0. A Total 15 Mid-bore notch @ 0.030" deep x 0.004" wide x 0.060" long in each hole. 3 Surface EDM No...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-3560B
AFNDT-3560B
Description:  Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-4010/7075T6
AFNDT-4010/7075T6
Description:  6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 7075-T6 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-7075DAA19
AFNDT-7075DAA19
Description:  ASTM DISTANCE AMPLITUDE SET OF 19 7075-T6 ALUMINUM (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-IIW-01AL
AFNDT-IIW-01AL
Description:  ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-PR-T-2521/22
AFNDT-PR-T-2521/22
Description:  CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-ROMPAS-7075-T6
AFNDT-ROMPAS-7075-T6
Description:  ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AFNDT-SRS-082A-1
AFNDT-SRS-082A-1
Description:  EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc...
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AGE-04243-401
AGE-04243-401
Description:  BREAKOUT BOX - RUDDER ELECTRIC TEST SET (GSE 075)
In stock:  0
Sources:  3
For Aircraft*:  Embraer Legacy 600 / Legacy 650
ERJ 145
Photos:  
AHS29-C2-A1
AHS29-C2-A1
Description:  CUSTOM 29 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM WITH 0.015" THRU EDM NOTCH AND 0.030X0.030 CORNER NOTCH. Includes Test Report Traceable to NIST and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AIRMAN760
AIRMAN760
Description:  AIRMAN 760 HEADSET ( F.01U.118.075 )
In stock:  0
Sources:  4
For Aircraft*:  N/A
Photos:  
AL 35-45
AL 35-45
Description:  BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" Wide +0.00, - .002" and +/- .001" Depth), MATERIAL: 2124-T8 or 7075-T7 ALUMINUM. SIZE: 1.5"W x 3.75"L...
In stock:  0
Sources:  8
For Aircraft*:  N/A
Photos:  
AL35-45
AL35-45
Description:  BOMBARDIER SURFACE REFERENCE STANDARD - 7075-T7ALUMINUM. FULL WIDTH EDM NOTCHES .008", .020", .040" (.005"W +/- .002, MAX.006) BLOCK SIZE: 3.75"L x 1.50"W x 0.25"H
In stock:  0
Sources:  8
For Aircraft*:  N/A
Photos:  
AL7075-016-063
AL7075-016-063
Description:  CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.016", 0.032", 0.056", 0.063" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AL7075-024-125
AL7075-024-125
Description:  CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE 0.024", 0.071", 0.112", 0.125" +/-.002". PAD SIZE: .787" x .787". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
AMP-39-B-53-10-00-00A-31BA-K
AMP-39-B-53-10-00-00A-31BA-K
Description:  REFERENCE STANDARD PER AW139 IETP 33rd Issue. Material: AISI 301-1/4 HARD STEEL, 7075 AL
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ANDT-1096AL
ANDT-1096AL
Description:  10 STEP REFERENCE BLOCK, .020".030",.040",.050",.063",.071",.080",.090",100",.125" MATERIAL: (7075-T651 ALUMINUM)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ANDT390A
ANDT390A
Description:  BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 10 Figure 4. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ANDT390B
ANDT390B
Description:  BOEING REFERENCE STANDARD 737 Part 6 53-10-47 Page 11 Figure 5. Material: 2024-T3 and 7075-T6. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
APB-NDT006
APB-NDT006
Description:  AVIATION PARTNERS BOEING REFERENCE STANDARD 767 PART 6 57-20-53 PAGE 5-6 FIGURE 2. MATERIAL: 7075-T7 (40-44 IACS), 2324-T3 (29.5-33.5 IACS), AND 2224-T3 (29.5-33.5 IACS)AIRPLANE QUALITY MATERIAL WITH AN ELECTRICAL CONDUCTIVITY BETWEEN ±5. INCLU
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
APB-NDT3302
APB-NDT3302
Description:  AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-35 Page 6 Figure 2. Material: 2024-T3, 7050-T7 (40-44% IACS), and 7075-T6. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
APB-NDT5201
APB-NDT5201
Description:  AVIATION PARTNERS BOEING 757 Part 6 57-20-01 Page 23-24 Figure 10. Material: 7075-T7 and 2324 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
ARP
ARP
Description:  C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARR-25.40MSE/2WL
ARR-25.40MSE/2WL
Description:  ROTATING SCANNER PROBE 100KHZ-2MHZ SHIELDED, SPLIT END, 2.0" WORKING LENGTH, 4 PIN STEP LEMO, BOLT HOLE SIZE RANGE 25.40mm(1.000")Ø - 27.22mm(1.075")Ø. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARRFX-.500SE-.75T/6WL
ARRFX-.500SE-.75T/6WL
Description:  RECHII FLEXIBLE ROTARY PROBE 100KHz-2MHz, 0.500"-0.562"OD, 0.075" LONG TIP, 6.0" WORKING LENGTH, 4 PIN STEP LEMO, Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARS-0824-7075T6
ARS-0824-7075T6
Description:  Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARS-0824-7075T7
ARS-0824-7075T7
Description:  Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARS-0824-7075T73
ARS-0824-7075T73
Description:  Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARS-0824A
ARS-0824A
Description:  Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0....
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ARS-1012HSA
ARS-1012HSA
Description:  12 HOLE REFERENCE STANDARD 7075-T6 WITH 0.020" x 0.020" and 0.030" x 0.030" CORNER EDM NOTCH. HOLE SIZES: 1/8, 5/32, 3/16, 13/64, 7/32, 5/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ASE-WSNDT
ASE-WSNDT
Description:  CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ATBC-ALU7075
ATBC-ALU7075
Description:  ACCESSORY, TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 %IACS)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ATBCALU7075
ATBCALU7075
Description:  TEST BLOCK, CONDUCTIVITY, ALUMINIUM ALLOY, 7075-T6 (30.0-34.1 %IACS)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ATI518ND 
ATI518ND 
Description:  NUT PLATE DRILL JIGS  FOR NUTS PLATE MS21075L3N
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
ATI518NE  
ATI518NE  
Description:  NUT PLATE DRILL JIGS FOR NUTS PLATE MS21075L4N
In stock:  0
Sources:  3
For Aircraft*:  N/A
Photos:  
B221075T-1
B221075T-1
Description:  C&D LATCH TESTER P/N B221075T-1 (C&D AEROSPACE)
In stock:  0
Sources:  15
For Aircraft*:  ERJ 145
Photos:   
B27025-16-CM
B27025-16-CM
Description:  075THK 6061-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
B27025-17-CM
B27025-17-CM
Description:  075THK 6061-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
B27025-52-CM
B27025-52-CM
Description:  075THK 6061-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
B71001-274-CM
B71001-274-CM
Description:  075" THK 4130
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
B71027-15-CM
B71027-15-CM
Description:  075THK A36
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
BAT-8879
BAT-8879
Description:  .3075 x .2910 HSS Piloted Threaded Reamer
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
BAT-9979
BAT-9979
Description:  .3075 x .2910 HSS Piloted Chucking Reamer
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
C130-CW-012
C130-CW-012
Description:  C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
C130-CW-013
C130-CW-013
Description:  C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
C130-CWOW-019
C130-CWOW-019
Description:  LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
C130-OW-016
C130-OW-016
Description:  LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 NO.1 AND NO. 4 TRUSS MOUNT UPPER LUGS. MATERIAL: 7075-T6 ALUMINUM SULFURIC ACID ANODIZED PER MIL-A-8625EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
C130-OW-017
C130-OW-017
Description:  C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMI
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
C130-OW016
C130-OW016
Description:  LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 NO.1 AND NO. 4 TRUSS MOUNT UPPER LUGS. MATERIAL: 7075-T6 ALUMINUM SULFURIC ACID ANODIZED PER MIL-A-8625EQUIVALENT. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
C130-UT-17-1
C130-UT-17-1
Description:  C-130 CALIBRATION STEP STANDARD. MATERIAL:7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
C71019-9-CM
C71019-9-CM
Description:  0750" THK 4140 OR 4340
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
C78018-36-CM
C78018-36-CM
Description:  075THK 1018 CRS
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
CA12-1508A
CA12-1508A
Description:  DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T7 ALUMINUM, 54-10-11 PAGE 634A FIG.603 SHEET 21B
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
CTA9075DEM
CTA9075DEM
Description:  CTU9075 AUS DEMO 5AH BAT
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
CTE 6075
CTE 6075
Description:  DIGITAL VACUUM MACHINE CTE 6075 (HABCO)
In stock:  0
Sources:  4
For Aircraft*:  A319
A310
A310-200
A310-300
A318
A310F
A319 (Sharklets)
A310-200F
A310-300F
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)
A330
A330-200
A330-300
A330 Freighter
A330-200 Freighter
A340
A340-200
A340-300
A340-500
A340-600
A300B2
A300
A300B4/C4
A300-600/600C/601
A300-600ST Beluga
A300F
A300-600 Combi
A300C4/F4 Freighter
A300-600F Freighter
Photos:  
CTE6075
CTE6075
Description:  CART CART-VACUUM AIRFLOW CTE6075/CTE
In stock:  0
Sources:  4
For Aircraft*:  A319
A310
A310-200
A310-300
A318
A310F
A319 (Sharklets)
A310-200F
A310-300F
A320-100/200
A321-100/200
A320-200 (Sharklets)
A321-200 (Sharklets)
A330
A330-200
A330-300
A330 Freighter
A330-200 Freighter
A340
A340-200
A340-300
A340-500
A340-600
A300B2
A300
A300B4/C4
A300-600/600C/601
A300-600ST Beluga
A300F
A300-600 Combi
A300C4/F4 Freighter
A300-600F Freighter
Photos:  
CTU9075DEM
CTU9075DEM
Description:  CTU9075 EU DEMO KIT 5Ah BAT
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
CW-23 OW-47
CW-23 OW-47
Description:  C-130 CALIBRATION STANDARD. MATERIAL:7075-T7EQUIVALENT ALUMINUM. FASTENER (NAS517-3-2) 2 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE FOR STANDARD AND CERTIFICATION FOR MATERIAL AND FASTENERS.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETBS AL-1T 7075-T6 0.120
DAC ETBS AL-1T 7075-T6 0.120
Description:  DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T6 Aluminum
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETBS AL-1T 7075-T6 0.120:DAC ETBS AL-1T 7075-T73 0.120
DAC ETBS AL-1T 7075-T6 0.120:DAC ETBS AL-1T 7075-T73 0.120
Description:  DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T73 Aluminum
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETBS AL-1T/ 0.032
DAC ETBS AL-1T/ 0.032
Description:  MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T7 ALUMINUM .032". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETBS AL-1T/ 0.090
DAC ETBS AL-1T/ 0.090
Description:  MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T6 ALUMINUM .090". Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETOH AL
DAC ETOH AL
Description:  7075-T6 Aluminum Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC ETOH-AL.04
DAC ETOH-AL.04
Description:  717-200 OPEN HOLE REFERENCE STANDARD. FIG. 1.20, PAGE 1. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC GSET AL.01
DAC GSET AL.01
Description:  7075-T6 Aluminum Multi-purpose Reference Standard
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC GSET AL.01-MV
DAC GSET AL.01-MV
Description:  7075-T6 Aluminum Multi-purpose Reference Standard, Modified Version, Surface notches are only .125"long from edge of standard
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC GSET-AL
DAC GSET-AL
Description:  MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DAC GSET-AL.01
DAC GSET-AL.01
Description:  MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DC-10 FIG603/23
DC-10 FIG603/23
Description:  DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 635 FIG.603 SHEET 23
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DC-10 FIG603/30-AL
DC-10 FIG603/30-AL
Description:  DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 642 FIG.603 SHEET 30
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DPG2000BBL5000PSIG-D4-10-HA
DPG2000BBL5000PSIG-D4-10-HA
Description:  GAUGE FOR G32075-16
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
DZZ7193-11-CM
DZZ7193-11-CM
Description:  075THK 4130
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DZZ7193-9-CM
DZZ7193-9-CM
Description:  075THK 4130
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DZZ7259-17-CM
DZZ7259-17-CM
Description:  5 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
DZZ7259-25-CM
DZZ7259-25-CM
Description:  5 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
E54‐004
E54‐004
Description:  CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ET-55C-3
ET-55C-3
Description:  BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2124-T8 or 7075-T7 ALUMINUM.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
ET6018
ET6018
Description:  CUSTOM SIKORSKY S61-N FLAT BOTTOM HOLE AFT REAR FUSELAGE REFERENCE STANDARD 51-10-05 FIGURE 7 (SHEETS 1-5). MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certiicate of Conformance.
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-29-CM
F70312-29-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-32-CM
F70312-32-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-34-CM
F70312-34-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-41-CM
F70312-41-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-45-CM
F70312-45-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
F70312-46-CM
F70312-46-CM
Description:  075THK 4140
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
FERVI 0752
FERVI 0752
Description:  FERVI 0752 - 230V 750W FLOOR DRILL PRESS WITH DRIVE BELT
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G276
G276
Description:  Gage - GO .1025 - NO-GO .1075
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
G35002-2-CM
G35002-2-CM
Description:  075THK NYLON, TYPE 6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G392
G392
Description:  Gage - GO .0750 - NO-GO .0850
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
G623
G623
Description:  (MTO)-GAGE GO .0750 NO-GO .0790
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
G700050750
G700050750
Description:  G700050750;PIM Blanket 60-inch x 60-inch
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G700050751
G700050751
Description:  G700050751;PIM Blanket Kit 3x 120-inch x 60-inch and 2x 60-inch x 60-inch
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G700050752
G700050752
Description:  G700050752;PIM Foil 36-inch x 100-ft Roll
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G700050756
G700050756
Description:  G700050756;PIM Test Probe
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
G800
G800
Description:  (MTO)-GAGE GO .3005 NO-GO .3075
In stock:  0
Sources:  8
For Aircraft*:  N/A
Photos:  
G804
G804
Description:  (MTO)-GAGE GO .0750 NO-GO .0780
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
Gedore-012075
Gedore-012075
Description:  Gedore 012075 17mm TB OPEN END, Torque Wrench End Fittings (Captive pin)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
Gedore-049075
Gedore-049075
Description:  Gedore 049075 17mm O/E - ATB 8mm SPIGOT, Torque Wrench End Fittings (8mm Spigot)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
Gedore-055075
Gedore-055075
Description:  Gedore 055075 4-40 x 1.5 ST/FTNG WSTT10
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
GSE5100758
GSE5100758
Description:  PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
GSE5100761
GSE5100761
Description:  PUSH-PULL FORCE GAGE, (0 - 50 POUNDS)-GSE5100761 & GSE5100758
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
IAE1M14075
IAE1M14075
Description:  IAE 1M14075 LOCATING FIXTURE
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
IIW2.IA
IIW2.IA
Description:  IIW TYPE 2 CALIBRATION BLOCK - 7075-T6 ALUMINIUM ALTPN - IIW-2 AL
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
IMEI 352964040962590
IMEI 352964040962590
Description:  O2 DONGLE (07512491147)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J07008-27-CM
J07008-27-CM
Description:  075THK 6061-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J07511T
J07511T
Description:  PROTO 11/16" SOCKET SET 07511T
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J21008-8-CM
J21008-8-CM
Description:  80 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J49003-14-CM
J49003-14-CM
Description:  25 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J49003-15-CM
J49003-15-CM
Description:  25 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J49003-19-CM
J49003-19-CM
Description:  50 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J52009-36-CM
J52009-36-CM
Description:  075THK 6061-T651
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J52009-37-CM
J52009-37-CM
Description:  075THK 6061-T651
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J52030-52-CM
J52030-52-CM
Description:  100 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J54001-24-CM
J54001-24-CM
Description:  05THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J54001-36-CM
J54001-36-CM
Description:  05THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J54001-41-CM
J54001-41-CM
Description:  05THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J71043-62-CM
J71043-62-CM
Description:  75 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
J71043-77-CM
J71043-77-CM
Description:  75 THK 7075-T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
K551075
K551075
Description:  Mitutoyo K551075 - Turn-swivel joint ø 12 mm
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9300340-003
L9300340-003
Description:  COUPON, 7075-T76511, 20"LONG, .790" THICK, 2.5" WIDE
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9300341-001
L9300341-001
Description:  SKIN PLATE, 2024-T351, 24"LONG, .869" THICK, 8" WIDE + SPAR PLATE, 7075-T7651, 24"LONG, .490" THICK, 8" WIDE *Customer supplies fasteners*
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9300341-005
L9300341-005
Description:  SPAR PLATE, 7075-T7651, 24"LONG, .490" THICK, 8" WIDE
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-001
L9301170-001
Description:  TEST COUPONS, 11" Long x 1.88" wide x .544" thick 7075-T7651, 11" Long x 1.88" wide x .966" thick 2024-T3 (Substitute for 2219-T851) Requires Sealant
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-011
L9301170-011
Description:  TEST COUPONS, 11" Long x 1.88" wide x .486" thick 7075-T7651, 11" Long x 1.88" wide x .861" thick 2024-T3 (Substitute for 2219-T851) Requires Sealant
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-021
L9301170-021
Description:  TEST COUPONS, 11" Long x 1.88" wide x .431" thick 7075-T7651, 11" Long x 1.88" wide x .764" thick 2024-T3 (Substitute for 2219-T851) Requires Sealant
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-031
L9301170-031
Description:  TEST COUPONS, 11" Long x 1.88" wide x .544" thick 7075-T7651, 11" Long x 1.88" wide x .966" thick 2024-T3 (Substitute for 2219-T851)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-041
L9301170-041
Description:  TEST COUPONS, 11" Long x 1.88" wide x .486" thick 7075-T7651, 11" Long x 1.88" wide x .861" thick 2024-T3 (Substitute for 2219-T851)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
L9301170-051
L9301170-051
Description:  TEST COUPONS, 11" Long x 1.88" wide x .431" thick 7075-T7651, 11" Long x 1.88" wide x .764" thick 2024-T3 (Substitute for 2219-T851)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
LSW1-8AL7075
LSW1-8AL7075
Description:  UT STEP WEDGE, ALUMINUM 7075 (1-20MM)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MAB BLOCK-A
MAB BLOCK-A
Description:  REFERENCE STANDARD ALUMINIUM 7075 T6-CONF ASTM E164
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MAB-AL
MAB-AL
Description:  ROMPAS BLOCK 7075-T6AW
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MAB-CS
MAB-CS
Description:  ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note:
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MAS24-517731
MAS24-517731
Description:  BUTANESINGL+HAZMAT CHRG(UN1075
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MAS72-517731
MAS72-517731
Description:  BUTANESINGL+HAZMAT CHRG(UN1075
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
MHS-10-1A-2
MHS-10-1A-2
Description:  7075-T6 (BOLT HOLE STANDARD BLOCK FOR EDDY CURRENT INSPECTION)
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
MHS-12-1A-2
MHS-12-1A-2
Description:  ALUMINUM 7075-T6 MULTI-HOLE REFERENCE STANDARD W
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT 3285
NDT 3285
Description:  BOEING REFERENCE STANDARD 737 PART 6 53-30-63 PAGE 11 FIGURE 2. MATERIAL: 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
NDT 3289
NDT 3289
Description:  BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
NDT 3293
NDT 3293
Description:  BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
NDT 3299
NDT 3299
Description:  BOEING REFERENCE STANDARD 737 PART 6 53-30-65 PAGE 8 FIGURE 2. MATERIAL: 2024-T3 AND 7075-T6. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE.
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
NDT1047A
NDT1047A
Description:  Boeing Standard, 747 PT6 51-00-00:PG6 FIG22 DETAILI, 7075T6
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT1048
NDT1048
Description:  REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL)
In stock:  0
Sources:  4
For Aircraft*:  N/A
Photos:  
NDT1048-4.8/8.7
NDT1048-4.8/8.7
Description:  Boeing Standard, Multi Hole, Certified to 737 PT6 51-00-00 FIG16 PG10, 7075-T6 w/ .020 x.020 x .005 MAX Width, PN will be NDT1048-4.8 NDT1048-5.1 NDT1048-5.5 NDT1048-6.3 NDT1048-6.7 NDT1048-7.1 NDT1048-7.9 NDT1048-8.3 NDT1048-8.7
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT1048-7075T6
NDT1048-7075T6
Description:  Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 7075-T6 Aluminum
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT1084-.0750
NDT1084-.0750
Description:  BOEING STANDARD, 737 PT6 51-00-00 PG 8 FIG 3 PROCEDURE 16, .0750 HOLE DIAMETER
In stock:  0
Sources:  2
For Aircraft*:  N/A
Photos:  
NDT1084-1.750-7075T6
NDT1084-1.750-7075T6
Description:  Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 7075T6 Aluminum
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT126
NDT126
Description:  REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
NDT188A
NDT188A
Description:  REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL)
In stock:  0
Sources:  1
For Aircraft*:  N/A
Photos:  
*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.
<< Previous Page
Page 4
Next Page >>