Tool Description: 075 | Aviapool

Partial Match

Tool #

Description

In Stock

Our Sources

For Aircraft*

Photos

Add to Request

AFNDT-2106/7075

AFNDT-2106/7075

Description: 5 STEP WEDGE .020", .060", .150", .300", .600". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2107/7075T6

AFNDT-2107/7075T6

Description: EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2109

Description: 15 Hole aluminum reference standard, material 7075-T6, hole sizes: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64. With .030 x .030 and .020 x .020 Corner EDM Notches. Includes Test Report and Certificat

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2113/7075

AFNDT-2113/7075

Description: 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2117AL

Description: 6 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .200", .300", .400, .500" +/-.001". PAD SIZE 1.0" x 1.0". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2118

Description: CUSTOM 6 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm +/- .05mm . Pad Size: .750" x .750" Material- 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2119AL

Description: 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2123AL

Description: 12 HOLE REFERENCE STANDARD 7075-T6, 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", .005" +/-.001" THROUGH NOTCH ON EACH HOLE and A .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. SURFACE NOTCHES: .008", .020"...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2127

Description: SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2130AL

Description: 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 1/2",, 9/16" , 5/8", 11/16, 3/4", 13/16", 7/8", 15/16", 1.0", .030X.030 CORNER NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2132/2024-T3

AFNDT-2132/2024-T3

Description: 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. MID-WALL EDM NOTC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2132/7075-T6

AFNDT-2132/7075-T6

Description: 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. MID-WALL EDM NOTC

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2133/7075T6

AFNDT-2133/7075T6

Description: 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Inclu

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2133AL-1

Description: 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001 NOTCH

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2140/7075

AFNDT-2140/7075

Description: 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2141AL

Description: 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER EDM NOTCH and .020" MID-WALL EDM NOTCH IN EACH HOLE. Tolerance: .005" +/-.001". Includes Test Repo

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2142

Description: 6 STEP WEDGE .200", .300",. 400", .500", .650" , .800" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" x 4.8". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2143

Description: 6 STEP WEDGE .024", .040",. 060", .080", .100" , .150" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" Wide x 1.1" Long for the first and last step. 0.8" x 1.1" long for the 4 inside steps. Total Length = 5.4" Long. TOLEREANCE = +/- .001. Includes Hold...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2144

Description: 13 HOLE REFERENCE STANDARD 7075-T6 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 1.0"), . 040" DEEP x .005" WIDE +0.00/-.002" THROUGH EDM NOTCH in EACH HOLE. Includes Test Report and Certificate of Co

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2147/7075-T6

AFNDT-2147/7075-T6

Description: Step Wedge: 7075-T6 Aluminium, 5 Steps total (2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm). Step pad size: .75” x .75”. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2148AL

Description: Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 5mm, 7.5mm, 10mm and 12.5mm). Step pad size: 1” x 1. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2149AL

Description: 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 020" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2149AL-1

Description: 13 HOLE REFERENCE STANDARD 7075-T7 Auminum. Hole Sizes: (5/32",3/16", 7/32" ,1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1.0"), . 040" DEEP x .005" MAX WIDTH THROUGH EDM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2150AL

Description: 9 HOLE REFERENCE STANDARD 7075-T6, HOLE SIZES, 3/16",, 7/32" , 9/32", 5/16, 11/32", 3/8", 7/16", 5/8", 3/4", CORNER EDM NOTCH .030X.030 +/- 10%; WIDTH: .005+/-.001. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-2157AL

Description: 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3002/7075-T6

AFNDT-3002/7075-T6

Description: 6 STEP WEDGE .030", .040", .060", .080", .100", .150" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP FACE. 6.0" X 1.0" LENGTH INCLUDES HOLDER. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3010/7075-T6

AFNDT-3010/7075-T6

Description: METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3010/7075-T7

AFNDT-3010/7075-T7

Description: 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: 7075-T7 ALUMINUM. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3011AL

Description: 4 HOLE REFERENCE STANDARD 7075-T6,1/8"(3.2mm),5/32"(3.9mm),1/4"(6.5mm),9/32"(7.1mm), .005" +/-.001" THROUGH NOTCH ON EACH HOLE and .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. .005" +/-.001". Includes Test Report and Certificate of Confor...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3012AL

Description: 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3013/7075

AFNDT-3013/7075

Description: 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3013AL

Description: 6 STEP WEDGE, 0.5mm,1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3014AL

Description: 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3015

Description: EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3017AL

Description: 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3020AL

Description: 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3022

Description: BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3025AL

Description: Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3027AL

Description: MHS style Multi-Hole reference standard (Aluminum 7075-T6 with certifications). 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches and .010, .020, .040 Surface notch...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3028AL

Description: 3i-Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes , 7/16", 1/2" and 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3029/7075

AFNDT-3029/7075

Description: 6 STEP WEDGE .100", .200",. 300", .400", .500" , .600". MATERIAL: 7075-T6 ALUMINUM. STEP PAD SIZE: .787" x .787". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3030

Description: Step Wedge: 7075-T6 Aluminium, 5 Steps total (.010", .016", .020", .030", .040"). Step pad size: 1” x 1”. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3032-1

Description: 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3036AL

Description: CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3039

Description: CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3045-2024T3

AFNDT-3045-2024T3

Description: 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3045-7075T6

AFNDT-3045-7075T6

Description: 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3051AL

Description: (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 6 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 3/16", 1/4", 5/16", 3/8", and 1/2". Material: 7075-T6 ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3056AL

Description: 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16', 5/8". Corner EDM Notches: .020" x .020" x .005" +/- .001" Wide and Mid-Wall EDM Notches .020" x .020" x .005" +/- .001" Wide in Each...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3057AL

Description: Custom 3 Step Thin Wedge with Holder. Step Thicknesses: 0.015", 0.030" and 0.070". Pad Size: 1.0" x 1.0" x 3.0" Total Length. Step ThicknessTolerence +/- .001. Material: 7075-T6 Aluminum Also Contains 2 EDM Flaws .010" and .020" Deep x .005" Wide x .3...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3061AL

Description: EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3064/7075AL

AFNDT-3064/7075AL

Description: 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3065/7075AL

AFNDT-3065/7075AL

Description: 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3070AL

Description: 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3076AL-1

Description: 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3077AL-1

Description: 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3079AL

Description: 9 STEP WEDGE, STEP SIZES OF: .020", .030", .040", .050", .060", .070", .080", .090" and .100" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3100/7075

AFNDT-3100/7075

Description: CUSTOM THICKNESS STANDARD, 7075-T6 or 7075-T7 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3101

Description: Thin Material Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 1.00mm, 1.5mm, 2.00mm and 2.5mm). Step pad size: 20mm x 20mm. Anodized. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3102AL/7075

AFNDT-3102AL/7075

Description: 9 STEP WEDGE .500", .625",. 750", .875", 1.0" , 1.125", 1.250", 1.375", 1.50". MATERIAL: 7075-T6 ALUMINUM WITH GRAIN DIRECTION. STEP PAD SIZE: 1.0" x 1.0". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3113

Description: Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3116

Description: 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3119AL

Description: Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3120AL

Description: 11 hole Reference Standard 7075-T6 Aluminum. Contains 10 hole sizes; 7/64, 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 and 1.0 inch diameters.( .030X.030 Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" DEEP x .750" LONG.) Includes T...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3134AL

Description: 8 STEP WEDGE, STEP SIZES OF .110", .120",.130", .140", .150", .160", .170", and .180" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3135AL

Description: 7 STEP WEDGE, STEP SIZES OF .190", .200", .210", .220", .230", .240", and .250" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3136-7075T6

AFNDT-3136-7075T6

Description: 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3139AL

Description: 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3140AL

Description: 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3141AL

Description: Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3141AL-1

Description: Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with .005" max width through EDM notch in holes #1-#6 and a .060"L x .030"D x .005" max width mid-wall notch in holes #7-12, and .030"x.030"x.005" max width corner notch in each hol

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3141AL-2

Description: Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.2966, .3122", .3278", .3434", .359", ..3746", .3902",

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3142AL

Description: CUSTOM 4 STEP REFERENCE BLOCK. MATERIAL: 7075-T6. STEP SIZE .0100",.400",.700", 1.00" +/-.001. PAD SIZE: 1"X4". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3144AL

Description: 7 STEP WEDGE, STEP SIZES OF .280", .350", .450", .550", .650", .750", and .850" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3148AL

Description: 13 HOLE REFERENCE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" & 1". THRU EDM NOTCHES IN EACH HOLE, Depth: 0.040" +/- 0.001 x Width : 0.005" + 0 - 0.002". Includes Certification R...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3151AL

Description: 15 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report and

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3153/7075T6

AFNDT-3153/7075T6

Description: 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16), WITH .050"x.050" .005±.001 CORNER EDM NOTCH IN EACH HOLE.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3166AL

Description: CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3170AL

Description: Thin Material Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 1.00mm, 1.5mm, 2.00mm and 2.5mm). Step pad size: 19mm x 19mm. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3171AL

Description: 17 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040" +/- 10% x .005" +/- .001" Wide. Includes Test Report and Certificate ...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3172AL-2

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3173AL-2

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3174AL-2

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3175AL

Description: 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3176AL-2

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3178AL-1

Description: Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3180

Description: 6 FLAT BOTTOM HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" .060" LONG X. 020" x DEEP x .005" WIDE +/- .001" WIDE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3182AL

Description: 5 STEP WEDGE. STEP SIZES: .040", .100", .150", .250", .350". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: .75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3191AL

Description: 7 STEP WEDGE. STEP SIZES: .030", .115", .200", .285", .370", .455", and .540" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3192AL

Description: 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3196AL

Description: CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .250",.500",.750", 1.000" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3201A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3202A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3203A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3204/7075

AFNDT-3204/7075

Description: 8 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3204A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3205A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3206A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3207A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3208A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3209A

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3212AL

Description: 13 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 23/32". EACH HOLE CONTAINS A CORNER EDM NOTCH 030" x .030" x Width : 0.005" +/- 0.002". Includes Certif...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3214/7075-T6

AFNDT-3214/7075-T6

Description: 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL certificate.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3225AL

Description: 12 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010"...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3226AL

Description: Custom Metric 6 Step Block. Step Thicknesses of 2mm, 4mm, 6mm, 8mm, 10mm, 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3227AL

Description: Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3228AL-2

Description: 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3231

Description: Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3231-1

Description: Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3237AL

Description: Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3238AL

Description: Contains 13 hole sizes; 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. EDM: ( .030 X .030 X .005 +/- .002) CORNER NOTCH and ( .020 X .005 +/- .002) THRU NOTCH. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report a

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3241AL

Description: Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains on the

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3244AL

Description: 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3246AL

Description: 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3247AL-1

Description: 8 STEP WEDGE, 1MM (.0394), 3MM (.1181), 5MM (.1968), 8MM (.3149), 10MM (.3937), 15MM (.5905), 20MM (.7874), 25MM (.9842) +/- .01MM. MATERIAL: 7075-T6 ALUMINUM. MATERIAL THICKNESS: .984, STEPS: .984X.984, LENGTH: 7.874

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3248AL

Description: Custom Metric 6 Step Block. Step Thicknesses of 0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm. (Tolerance: +/- 0.05mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3252AL

Description: 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3252CS

Description: 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 4340 or 4130 Carbon Steel.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3252TI

Description: 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 6AL-4V TITANIUM. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3253AL

Description: 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3254AL

Description: Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3255AL

Description: 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" +/-.002" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3256/7075-T6

AFNDT-3256/7075-T6

Description: 8 STEP WEDGE, 0.51mm (.020"), 0.64mm (.025"), 0.76mm (..030"), 0.91mm (.036"), 1.02mm (.040"), 1.14mm (.045"), 1.27mm (.050"), 1.42mm (.056") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Repor

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3257/7075-T6

AFNDT-3257/7075-T6

Description: 8 STEP WEDGE, 1.60mm (.063"), 1.80mm (.071"), 2.03mm (..080"), 2.31mm (.091"), 2.54mm (.100"), 3.0mm (.118"), 3.18mm (.125"), 3.56mm (.140") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Report

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3260AL

Description: Olympus Style Aluminum multi-hole reference standard. Contains 5 hole sizes; 2.0mm, 2.5mm, 3.0mm, 3.5 and 4.0mm hole diameters. EDM notch 0.5mm deep in each hole, length is half of the material thickness. Material: 7075-T76 Aluminum 15mm Thick. Includes T

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3275

Description: Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3286

Description: 12 HOLE REFERENCE STANDARD 7075-T6 (Hole Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1.0", 1-1/8",) .020"x.020" and .030"x.030" x .005"W +/-.002" CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3287AL

Description: Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3288AL

Description: 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: ASTM E 797 7075 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Clear Anodized for corrosion protection. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3289AL

Description: Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3290AL

Description: Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3291AL

Description: BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3299/7075-T6

AFNDT-3299/7075-T6

Description: 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3301/7075-T6

AFNDT-3301/7075-T6

Description: 8 STEP WEDGE, Step Sizes: 0.6mm,1.2mm,1.4mm,1.6mm,1.8mm, 2.0mm,2.2mm,2.4mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm Wide x 28mm Long for the first and last step. 20mm x 20mm long for the 6 inside steps. Total Length=176mm Long. TOLERANCE = +/- 0.05mm. Su

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3302//7075-T6

AFNDT-3302//7075-T6

Description: 8 STEP WEDGE:3.0mm,3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm,7.0mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm x 160mm. TOLERANCE = +/- 0.05mm. Supplied with Holder. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3304/7075-T6

AFNDT-3304/7075-T6

Description: 12 Hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3305AL

Description: Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3306/7075T6

AFNDT-3306/7075T6

Description: EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3309AL

Description: Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3312AL

Description: 12 HOLE REFERENCE STANDARD, 7075-T6 ALUMINUM. HOLE

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3315AL

Description: EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3317/7075

AFNDT-3317/7075

Description: 6 STEP WEDGE, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3318/7075-T6

AFNDT-3318/7075-T6

Description: 5 STEP WEDGE .500", .600",. 700", .800", 1.00" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75" X .75" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3320AL

Description: 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3321AL

Description: 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3334AL-1

Description: 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3335/7075-T6

AFNDT-3335/7075-T6

Description: Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3337AL

Description: 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3341AL

Description: 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3343/7075T6

AFNDT-3343/7075T6

Description: 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3344/7075T6

AFNDT-3344/7075T6

Description: 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 1.00" X 1.00" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3348/7075T6

AFNDT-3348/7075T6

Description: 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3350AL

Description: 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3351AL-1

Description: 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3354/7075-T6

AFNDT-3354/7075-T6

Description: METRIC 5 STEP WEDGE, 5MM, 10MM, 15MM, 20MM, 25MM, +/- .05MM. MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 20MM X 20MM SQUARE.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3356AL

Description: 4 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6, HOLE SIZES: 3/16",1/4", 3/4", 7/8". EDM NOTCH: .030" x .030" x .005+/- .001" CORNER NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3364

Description: 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3365AL

Description: 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3369/7075T6

AFNDT-3369/7075T6

Description: Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3370/7075T6

AFNDT-3370/7075T6

Description: EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3378-1AL

Description: 20 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM . HOLE SIZES: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 17/32, 9/16,19/32, 5/8, 11/16, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Inc...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3385/7075T6

AFNDT-3385/7075T6

Description: 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3386/7075T6

AFNDT-3386/7075T6

Description: 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3387AL

Description: 6 Hole Metric reference standard. Material: 7075-T6 Aluminum. Hole Sizes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. Corner EDM Notches: 1mm x 1mm x .15mm(.039" x .039" x .006"±.001"). Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3394AL

Description: 8 STEP WEDGE, STEP SIZES OF .015", .025",.040", .060", .080", .100", .150", and .200" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3398AL

Description: 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3401AL

Description: 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3404AL

Description: 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3406AL-1

Description: 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3409AL

Description: 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3417/7075T6

AFNDT-3417/7075T6

Description: 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3418/7075T6

AFNDT-3418/7075T6

Description: 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3421/7075T6

AFNDT-3421/7075T6

Description: 12 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16, 7/32,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH A .020"x.020" and .030"x.030" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3423

Description: Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3425

Description: Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3427AL

Description: 1/8" HOLE STANDARD IN 7075-T6 with .020" x .020" x .005" CORNER EDM NOTCH. MATERIAL SIZE 2.0" x 2.0" x .375". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3428

Description: CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3430

Description: CUSTOM HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 5/32", 6/32", 13/64", 8/32", 17/64". 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3430-1

Description: CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th row

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3433/7075T6

AFNDT-3433/7075T6

Description: 5 STEP WEDGE, 10mm, 20mm, 30mm, 40mm, 50mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3437AL

Description: CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3441AL

Description: 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3442AL

Description: Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 10 hole sizes; 1/8 inch (3.175mm), 3/16 inch (4.74mm),1/4 inch (6.35mm), 5/16 inch (7.92mm), 3/8 inch (9.52mm), 7/16 inch (11.09mm), 1/2 inch (12.7mm), 9/16 inch (14.27mm), 5/8 i

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3443AL

Description: Metric 6 Step Wedge, 2mm, 4mm, 6mm, 8mm, 10mm, 20mm ± .5mm, Pad Size: 25mm X 25mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3445AL

Description: METRIC 5 STEP WEDGE, 10mm, 15mm, 20mm, 25mm, 30mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3446

Description: SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3449/7075AL

AFNDT-3449/7075AL

Description: 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3452AL

Description: 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3455/7075T6

AFNDT-3455/7075T6

Description: 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3462AL

Description: 10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010", .020", .040", .060", .080", .100", .150", .200", .250", .300", +/-.001" . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Ce...

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3467AL

Description: 8 STEP ALUMINUM WEDGE, STEP SIZES: .150", .175",.195", .215", .245", .285", .310", and .330" +/- .001". PAD SIZE: 1.0" L x .75" W, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3474AL

Description: 12 Hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; 1/8 inch (3.175mm), 5/32 inch (3.96mm), 3/16 inch (4.74mm), 1/4 inch (6.35mm), 5/16 inch (7.92mm), 3/8 inch (9.52mm), 7/16 inch (11.09mm), 1/2 inch (12.7mm), 9/16 inch (14....

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3482AL

Description: 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3482AL-1

Description: 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

AFNDT-3483AL

Description: BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance.

In stock: 0

Sources: 1

For Aircraft*: N/A

Photos:

*For Aircraft - This is not an exhaustive list. Many items in our system can be used on multiple aircraft.

<< Previous Page

Page 3