| 20 January 2023 |
|---|
| Part Number | Tool Description | Location | Aircraft
or
Engine |
|---|
| 1 | 001U532A5100000 Calibrate | DORNIER 328/328 JET SE.4.48A CALIBRATION STANDARD Part 4 53-21-23 Page 11 Figure 407 Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 2 | 019 Calibrate | BOEING REFERENCE STANDARD 7075-T6 ALUMINUM 7075 57-10-07 PART 6 PG.216. Calibrate | North America | |
| 3 | 038 Calibrate | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 Calibrate | North America | |
| 4 | 039 Calibrate | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 Calibrate | North America | |
| 5 | 1/N-02-384 Calibrate | Nomad Series N22 & N24 Reference Standard. for the inspection of Wing Strut Upper Fittings, Figure 27 Page 51. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 6 | 10-0109-00 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, INCONEL 718, 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 7 | 1002 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 Part 6 FIG 4. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 8 | 1003 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 14 and 51-00-06. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 9 | 1004 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-0 FIG 14 PARAGRAPPH 2.C. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 10 | 1005 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 and 51-00-06, MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 11 | 10212-0501A Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 12 | 10212-0501B Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 13 | 10212-0501C Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 14 | 10212-0501D Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 15 | 10212-0501E Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 16 | 10212-0501F Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 17 | 10212-0501G Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 18 | 10212-0501H Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 19 | 10212-0501J Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 20 | 10212-0501K Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 21 | 10212-0501L Calibrate | Reference Standard Document: 0798-10212-1000 Material: 2024-T3 or 7075-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 22 | 10RS-52-2-MLG-FTG-AF Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.3, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 23 | 10RS.01.1 Calibrate | BOEING REFERENCE STANDARD KC10 Page 1-6 MATERIAL: 2024-T3, 7075-T6, 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 24 | 10RS.02 Calibrate | BOEING REFERENCE STANDARD KC10 53.10.001, 53.10.013/.014 Page 1-8 Material: 2024-T3 and 7075-T6, 6AL-4V or Phenolic. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 25 | 10RS.05 Calibrate | DC-10 REFERENCE STANDARD 53.10.025, 53.10.028, 53.10.030. Page 1-5. Material: 2024-T3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 26 | 10RS.08 Calibrate | DC-10 REFERENCE STANDARD 55.10.003/.004 Page 1-12. Material: 7075-T6 and 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 27 | 10RS.10.1 Calibrate | DC-10 REFERENCE STANDARD 55.10.005/.006 Page 1-3. Material: 7075-T7. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 28 | 10RS.15a Calibrate | DC-10 SID REFERENCE STANDARD DETAILS -3,-5 & -7 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 29 | 10RS.15b Calibrate | DC-10 SID REFERENCE STANDARD DETAILS -3,-5, & -5, -501 ASSEMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 30 | 10RS.15c Calibrate | DC-10 SID REFERENCE STANDARD DETAILS -7, -9 & -11, -503 ASSWMBLY PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 31 | 10RS.17 Calibrate | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 32 | 10RS.17.1 Calibrate | DC-10 SID REFERENCE STANDARD DETAIL -3 & -5 PAGE 2-3. MATERIAL: 2024-T3 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 33 | 10RS.21 Calibrate | DC-10 REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 718 INCONEL. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 34 | 10RS.22a Calibrate | DC-10 REFERENCE STANDARD 54-10-029/.030 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 35 | 10RS.23 Calibrate | DC-10 SID REFERENCE STANDARD 54.10.029/.030. DETAIL -1 SHEET 1 PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 36 | 10RS.25a Calibrate | DC-10 SID REFERENCE STANDARD 57.10.029/.030. DETAIL -3 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 37 | 10RS.25b Calibrate | DC-10 SID REFERENCE STANDARD DETAIL -1 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 38 | 10RS.25c Calibrate | DC-10 SID REFERENCE STANDARD DETAIL -5 PAGE 1. MATERIAL: 7075-T7 ALUMNIUM. includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 39 | 10RS.26.1bM Calibrate | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-8 (SHEET1-8). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 40 | 10RS.27b Calibrate | DC-10 SID REFERENCE STANDARD DETAILS -7,-9 & -11 PAGE 1-6. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 41 | 10RS.32 Calibrate | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 42 | 10RS.33a Calibrate | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 43 | 10RS.33b Calibrate | DC-10 REFERENCE STANDARD 54-10-027 Page 1-2. Material: 6AL-4V. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 44 | 10RS.35 Calibrate | DC-10 REFERENCE STANDARD, SHEETS 1-4, PAGES 1-4. MATERIAL: 6AL-4V TITNIUM. Includes Test Report and Certificate of Conformance. 54.10.027 Calibrate | North America | |
| 45 | 10RS.36a Calibrate | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 Calibrate | North America | |
| 46 | 10RS.36aN Calibrate | DC-10 REFERENCE STANDARD DETAIL RA11005-12-1, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 Calibrate | North America | |
| 47 | 10RS.36b Calibrate | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 Calibrate | North America | |
| 48 | 10RS.36bN Calibrate | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027. Calibrate | North America | |
| 49 | 10RS.39.1 Calibrate | DC-10 SID REFERENCE STANDARD DETAIL -1, -3 & -5 PAGE 1-5. MATERIAL: 7075-T6 ALUMNIUM. Includes Certification Report and COC. Calibrate | North America | |
| 50 | 10RS.43 Calibrate | DC-10 REFERENCE STANDARD PAGE 1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 51 | 10RS.48 Calibrate | BOEING REFERENCE STANDARD - KC10. Page 1-23. Material: 2024-T3, 7075-T6, and 7150-T6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 52 | 10RS.50 Calibrate | DOUGLAS DC-10 REFERENCE STANDARD 54.10.031/.032 PAGES 1-5 (SHEET1-5). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 53 | 10RS.51-MLG-FTG-FF Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.1, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 54 | 10RS.52-1-MLG-FTG-AF Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.2, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 55 | 10RS.53-1-MLG-FTG-CC-UPR Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.4, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 56 | 10RS.53-2-MLG-FTG-AA Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.5, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 57 | 10RS.53-3-MLG-FTG-DD Calibrate | MD-10 REFERENCE STANDARD FIGURE 1.6, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 Calibrate | North America | |
| 58 | 10RS.55-1 Calibrate | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -63 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. Calibrate | North America | |
| 59 | 10RS.55-3 Calibrate | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -163 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. Calibrate | North America | |
| 60 | 10RS.55-5 Calibrate | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -3 SKIN, -53 TEAR STRAP, -363 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. Calibrate | North America | |
| 61 | 10RS.55-7 Calibrate | BOEING KC10 ET REFERENCE STANDARD. INCLUDES: -103 SKIN, -53 TEAR STRAP, -563 SHEAR CLIP. Includes Test Report Traceable to NIST and Certificate of Conformance. Calibrate | North America | |
| 62 | 10RS.bN Calibrate | DC-10 REFERENCE STANDARD DETAIL RA11005-12-2, SHEET 1 PAGE 1&2. MATERIAL: 4130 STEEL. Includes Test Report and Certificate of Conformance. 54.10.027 Calibrate | North America | |
| 63 | 123 Calibrate | BOEING TRANSDUCER POSITIONER FIXTURE 737 PT 4 52-10-01 Calibrate | North America | |
| 64 | 125 Calibrate | BOEING REFERENCE STANDARD 767 PT 6 -51-00-05 FIG 2 PAGE 6 & 737 pART 6 51-00-00 FIGURE 2 PAGE 6 DETAIL II. HOLE SIZES: 0.1875, 0.250, 0.3125, 0.375, 0.4375, 0.500. Material: 4130 or 4340 Cres Steel. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 65 | 126 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 66 | 127-0.032 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 67 | 127-0.036 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 68 | 127-0.040 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 69 | 127-0.050 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 70 | 127-0.063 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 71 | 127-0.071 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 72 | 127-0.080 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 73 | 127-0.090 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 74 | 127-0.100 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 75 | 127-0.110 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 76 | 127-0.125 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 77 | 127A-.032 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 78 | 127A-.036 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 79 | 127A-.040 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 80 | 127A-.050 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 81 | 127A-.063 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 82 | 127A-.072 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 83 | 127A-.080 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 84 | 127A-.090 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 85 | 127A-.100 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 86 | 127A-.110 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 87 | 127A-.125 Calibrate | BOEING REFERENCE STANDARD 737 / 747 PT 6 51-00-00 FIG.12 PG. 2-3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 88 | 128 Calibrate | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 89 | 130A Calibrate | BOEING THICKNESS STANDARD FOR X-BAND RADOMES DETAIL IV 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 90 | 130B Calibrate | BOEING THICKNESS STANDARD FOR C-BAND RADOMES DETAIL V 737 PT 6 53-50-00. MATERIAL: LUCITE. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 91 | 130C Calibrate | BOEING REFERENCE STANDARD Part 6 53-50-00 Page 13 Figure 1. Material: Aluminum. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 92 | 134 Calibrate | Boeing Reference Standard 707 Part 4 53-40-07 Page 12 Figure 2 (Sheet 6) Detail 3. Material: 4330M or Equivalent. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 93 | 145-15998-001 Calibrate | EMBRAER REFERENCE STANDARD 54-50-00 FIG 603, 4340 STEEL Calibrate | North America | |
| 94 | 145-44131-001 Calibrate | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Aluminum(7050-T745) Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 95 | 145-44131-003 Calibrate | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Steel(15-SPH 5/8") Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 96 | 145-44131-005 Calibrate | EMBRAER REFERENCE STANDARD 57-26-00 PT 2 FIG 601, Titanium(Titanium Galy US AMS2631 CLAI 1/2") Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 97 | 145-54-0008 Calibrate | EMBRAER REFERENCE STANDARD 54-50-00 FIG 606, 4340 STEEL Calibrate | North America | |
| 98 | 17-4PH BLOCK Calibrate | 17-4 PH Steel Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 17-4PH Steel. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 99 | 171-00844-601 16E1 Calibrate | EMBRAER REFERENCE STANDARD 7075-T7 ALUMINUM.Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 100 | 171T17969-401 Calibrate | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-10-00 pages 4-11. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 101 | 171T17973-401 Calibrate | EMBRAER 170/175/190/195 CALIBRATION STANDARD. PART NUMBER 171T17973-401. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 102 | 17P9M2007 Calibrate | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. Calibrate | North America | |
| 103 | 181 Calibrate | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 104 | 182 Calibrate | BOEING REFERENCE STANDARD 707 PART 6 55-10-07 PAGE 17. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 105 | 185 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13 & 777-200/300 51-00-04 PROCEDURE 1 PAGE 8. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 106 | 186A Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 107 | 186ABCDEF Calibrate | BOEING CUSTOM COMBINATION REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.1875", .2500", .3125", .3750", .4375", .500. Each hole size marked with the corresponding Boeing Part number 186A-186F Includes Test Report and Certific... Calibrate | North America | |
| 108 | 186B Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.2500. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 109 | 186C Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.3125. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 110 | 186D Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.3750. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 111 | 186E Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.4375. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 112 | 186F Calibrate | BOEING REFERENCE STANDARD 777 PT 6 51-00-02 Figures 1&2, Pages 6-7, HOLE SIZE 0.5000. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 113 | 188A Calibrate | BOEING REFERENCE STANDARD PT 651-00-00-1 FIG 6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 114 | 189 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-01 FIG 4 PG.13 & 737 PT 6 51-00-00 PROCEDURE 23 PG.11 FIG.7. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 115 | 192 Calibrate | BOEING REFERENCE STANDARD PT 6 51-00-00 FIG 13. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 116 | 194 Calibrate | BOEING REFERENCE STANDARD 737 PT 6 53-30-00 FIGURE 1., BOEING 757 PART 6 53-30-02 PAGE 5 FIGURE 2 Calibrate | North America | |
| 117 | 194A Calibrate | BOEING REFERENCE STANDARD 767 PT 6 53-30-02 FIG 3 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 118 | 1TD1133D07001-2001 Calibrate | Seyer Industries reference standard. Material: 2024-T351 Aluminum...Chamfer EDM Notch Size: .030" x .030" x .005" +/- .002"...Bore EDM Notch Size: .030" x .030" x .005" +/- .002". Includes Test Report and Certificate of Conformance. Part Serial Number:... Calibrate | North America | |
| 119 | 2-164-501 Calibrate | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 120 | 2-164-551 Calibrate | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 121 | 2-835-01-9301 Calibrate | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Calibrate | North America | |
| 122 | 2-835-01-9330 Calibrate | AIRBUS CALIBRATION BLOCK, 6AL-4v TITANIUM, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Calibrate | North America | |
| 123 | 2-835-01-9331 Calibrate | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 124 | 2-887-01-9313S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM TYPE SCCS3-7, A318 51-63-07. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 125 | 2-887-01-9314S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T251 ALUMINUM ..TYPE SCCS7-14, A318 51-63-07. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 126 | 2-887-01-9315S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM ..TYPE SCCS14-21 , A318 51-63-06-PB1. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 127 | 2-887-01-9316S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM ..TYPE SCCS21-28, A318 51-63-07. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 128 | 2-887-01-9319S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium TYPE SCCS3-7, A318/A319/A320/A321 51-63-06-991-002A. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 129 | 2-887-01-9321S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 130 | 2-887-01-9323S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 131 | 2-887-01-9325S Calibrate | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 132 | 2006 Calibrate | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K19). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 133 | 204-94034-1 Calibrate | Boeing Reference Standard- Lower Lug APE-1 Primary , D204-12769-6 ASIP Inspection Program. Material: 4340 Steel. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 134 | 206 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 135 | 208 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 136 | 208 FRONT SPAR Calibrate | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 Calibrate | North America | |
| 137 | 208 REAR SPAR Calibrate | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 Calibrate | North America | |
| 138 | 212-A1325-01 Calibrate | AIRBUS MILITARY REFERENCE STANDARD COM 212-266 PG 13 Calibrate | North America | |
| 139 | 235502 Calibrate | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 140 | 239 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 141 | 240 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 142 | 2506F Calibrate | S/B 57-200 Douglas DC-9 Reference Standard 7075-T6 Aluminum. Figure 5, 6,7 Calibrate | North America | |
| 143 | 262 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 Calibrate | North America | |
| 144 | 262A Calibrate | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 Calibrate | North America | |
| 145 | 263 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 53-10-27 PAGE 4 FIG 1. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 146 | 2683301-1 Calibrate | Cessna reference standard 55-10-02-0 (Rev 1).Model 208 Inspection of Horizontal Stabilizer Spars. Calibrate | North America | |
| 147 | 27-1-6033 Calibrate | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. Calibrate | North America | |
| 148 | 27-95031-001 Calibrate | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 149 | 272 Calibrate | BOEING REFERENCE STANDARD 727, PT 6 55-10-27 FIG. 2 Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 150 | 28-0-6049 Calibrate | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 151 | 285 Calibrate | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K23). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 152 | 286 Calibrate | BOEING REFERENCE STANDARD 727 PART 6 57-10-27 FASTENER (BACB30NM7K21). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 153 | 296 Calibrate | BOEING REFERENCE STANDARD 727 PT 6 53-30-27 Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 154 | 29A028 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance..... Calibrate | North America | |
| 155 | 29A029 Calibrate | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 156 | 29A029YS Calibrate | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 157 | 29A032 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, MATERIAL: 6AL-4V TITANIUM, 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 158 | 29A047 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, Aluminum(7075-T7)(39.5% IACS) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 159 | 29A049 Calibrate | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 304 stainless steel.. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 160 | 29A120 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601, MAGNESIUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 161 | 3-1251 Calibrate | NOSE WHEEL BEAD SEAT WHEELL PROBE FOR BOEING 707 Calibrate | North America | |
| 162 | 301 GUIDE Calibrate | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION Calibrate | North America | |
| 163 | 301SS Calibrate | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL: 301 STAINLESS . SIZE: 1.5"W x 3.75"L x .25" Calibrate | North America | |
| 164 | 302 GUIDE Calibrate | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION Calibrate | North America | |
| 165 | 305 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 57-10-18 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 166 | 312 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 6 FIGURE 2. 2024-T3 ALUMINUM Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 167 | 313A/313B Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 7 FIGURE 3. 2024-T3 ALUMINUM Calibrate | North America | |
| 168 | 315 Calibrate | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 169 | 316 Calibrate | BOEING REFERENCE STANDARD 737 PART 4 55-30-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 170 | 31A008 Calibrate | AIRBUS REFERENCE STANDARD 51-63-01 PT 6 FIG 601. MATERIAL: 4340 STEEL. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance... Calibrate | North America | |
| 171 | 320 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 55-10-19 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 172 | 321 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-19 FIGURE 3 PAGE 6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 173 | 323A Calibrate | BOEING REFERENCE STANDARD 737 PART 4 55-50-01 FIGURE 1 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 174 | 323B Calibrate | BOEING REFERENCE STANDARD 737 PART 4 53-10-38 FIGURE 2 PAGE 6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 175 | 323P Calibrate | BOEING ULTRASONIC TRANSDUCER SHOE 737 PART 4 53-10-38 FIGURE 3 PAGE 7. Includes Certificate of Conformance. Calibrate | North America | |
| 176 | 326 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-28 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 177 | 328A/328B Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 2 PAGE 7. Calibrate | North America | |
| 178 | 328C/328D Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-38 FIGURE 3 PAGE 8. Calibrate | North America | |
| 179 | 335 Calibrate | BOEING REFERENCE STANDARD 737 PT 6 53-10-31. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 180 | 336A Calibrate | BOEING REFERENCE STANDARD 737 PART 6 57-30-02 FIGURE 2 PAGE 5. Calibrate | North America | |
| 181 | 336B Calibrate | BOEING REFERENCE STANDARD 737 PART 6 57-30-02 FIGURE 2 PAGE 5. Calibrate | North America | |
| 182 | 338A Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 2024-T3. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 183 | 338B Calibrate | BOEING REFERENCE STANDARD 737 PART 6 53-10-35 FIGURE 1 PAGE 6. MATERIAL: 301 1/2 HARD. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 184 | 341 Calibrate | BOEING REFERENCE STANDARD 737 PART 4 53-10-40 FIGURE 1 PAGE 4. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 185 | 345 Calibrate | BOEING REFERENCE STANDARD 737 PART 6 57-40-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 186 | 349 Calibrate | BOEING REFERENCE STANDARD 737 PART 4 32-10-01 FIGURE 2 PAGE 5. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 187 | 350 Calibrate | BOEING REFERENCE STANDARD 737 PT 4 32-20-01 FIG 2. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
| 188 | 350P Calibrate | BOEING POISTIONING FIXTURE 737 PT 4 32-20-01 Calibrate | North America | |
| 189 | 351A Calibrate | BOEING REFERENCE STANDARD 737 PT 6 53-10-01 Calibrate | North America | |
| 190 | 351B Calibrate | BOEING REFERENCE STANDARD 737 PT 6 53-10-01 Calibrate | North America | |
| 191 | 353ABC Calibrate | BOEING REFERENCE STANDARD 737 PT6 53-10-12 Calibrate | North America | |
| 192 | 353D Calibrate | BOEING REFERENCE STANDARD 737 PT 6 53-10-12 Calibrate | North America | |
| 193 | 354A Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 194 | 354B Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 195 | 354C Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 196 | 355A Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 197 | 355B Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 198 | 355C Calibrate | BOEING REFERENCE STANDARD 737 PT 6 57-30-04 Calibrate | North America | |
| 199 | 356 Calibrate | BOEING REFERENCE STANDARD 737 53-30-04 PART 6 PAGE 4 FIGURE 1. Includes test report and Certificate of Conformance. Calibrate | North America | |
| 200 | 363 Calibrate | BOEING REFERENCE STANDARD PART 6 53-30-03 FIGURE 1 PAGE 6. Includes Test Report and Certificate of Conformance. Calibrate | North America | |
