| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C71019-1 | WRENCH AFT | 7 | |
| C71019-7 | WRENCH AFT | 12 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U148708 | WRENCH-INPUT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 100-49291 | Impeller Shaft Spline Wrench | 1 | |
| 100-51127 | IMPELLER SHAFT WRENCH | 1 | |
| 100-51127 | Impeller Shaft Wrench | 1 | |
| 100-51127PM | IMPELLER SHAFT WRENCH | 1 | |
| 101-590052-1 | LATCH POST ADJUSTMENT WRENCH (BEECHCRAFT CORP) | 2 | |
| 101-590052-3 | LATCH POST ADJUSTMENT WRENCH (BEECHCRAFT CORP) | 3 | |
| 10C2060 | WRENCH, CVT AFT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 110705-1 | WRENCH - AFT CONEBOLT NUT, CFM56-3 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 196K8009 | WRENCH, FUEL CONTROL SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 196K8009 REV NC | WRENCH, FUEL CONTROL SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8107 | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8107 REV B | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 206-XMS-OH-03 | THE GEAR SHAFT WRENCH | 1 | |
| 21C8069G02 | WRENCH, AFT DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 875.19981 | V20 CRAFTSMAN IMPACT WRENCH CRAFTSMAN 3/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 44707 | WRENCH, COMBINATION, 1-1/8IN, CRAFTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 413876 | SAFT NI-CAD AIRCRAFT BATTERY UNIVERSAL VENT WRENCH | 3 | |
| 414151 | SAFT 414151 NI-CAD BATTERY WRENCH M22 FOR CONNECTOR | 2 | |
| 414152 | SAFT 414152 Ni-Cad Battery Wrench M18 for Connector | 2 | |
| 416159 | EXTRACTOR WRENCH, SAFT BATTERY CELL PULLER, M8 OR M10 | 3 | |
| 2895071 | ADAPTOR-TORQUE WRENCH,APU G/SHAFT | 2 | |
| 2896391 | WRENCH-HOLDING,STARTER G/SHAFT ASSY | 2 | |
| 6795597 | WRENCH, SPANNER TM SHAFT | 4 | |
| 6795985 | WRENCH POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6796075 | WRENCH - DIFFUSER PUMP SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6796264 | WRENCH - TURBINE COUPLING SHAFT ASSEMBLY | 2 | |
| 6796316 | WRENCH - TORQUEMETER INNER SHAFT SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6796593 | Wrench Spanner ACC Drive Side Shaft | 3 | |
| 6796645 | WRENCH-SPLINE, NO. 60 PROP SHAFT THRUST BEARING | 1 | |
| 6797054 | WRENCH - DIFFUSER PUMP SHAFT GR SPANNER NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6797174 | WRENCH - TURB COUPLING SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6797368 | WRENCH SPLINE PROPELLER SHAFT 34 | 1 | |
| 6797637 | WRENCH T/M TOSAFTEY COUP MOUNT BOLT | 2 | |
| 6798980 | SHAFT SPANNER NUT WRENCH | 1 | |
| 6799615 | Prop Shaft Flange Bolt Wrench | 3 | |
| 6893387 | WRENCH, SPANNER TORQUEMETER SHAFT NUT | 2 | |
| 8563392 | WRENCH, TORQUE – AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23052528 | Wrench – Alternator Shaft Nut, Forward End, PU Access Drive | 2 | |
| 23053534 | Wrench – Nut, Radial Drive Bevel Pinion Gear-shaft, PU Access Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23053554 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23053592 | Wrench & Holder – Compressor Aft Bearing Retaining Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23053661 | WRENCH – MUTED BOLT, PROP SHAFT TO REAR CARRIER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23053690 | Wrench & Holder, LP Turbine Mid Forward Shaft Retaining Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23053695 | Wrench & Holder, Low Pressure Turbine Forward Shaft, Fan Drive Shaft, Retaining Nut | 2 | |
| 23054806 | WRENCH & HOLDER – FAN SHAFT BEARING RETAINING NUT | 3 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23068605 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 267X674 | WRENCH, TORQUE;CRAFTSMAN DIGITORK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269A9291 | Wrench Adapter Preload Ls Shaft | 1 | |
| 269T9211-003 | DRIVE SHAFT COUPLING ADAPTER SPANNER WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269T9299 | Wrench, Lower Pulley Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 289639-1 | WRENCH,HOLDING,SHAFT ASSEMBLY | 2 | |
| 289766-1 | SHAFT HOLDING WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291349-1 | WRENCH GEAR SHAFT HOLDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 297643-1/-2 | WRENCH, SHAFT STRETCHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14093 | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093 REV J | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14093G03 | WRENCH, COUPLING NUT ‐ FAN MID SHAFT | 4 | |
| 2C14093P13 | COUPLING NUT WRENCH-LPT MID SHAFT | 1 | |
| 2C6038G02 | WRENCH, FAN SHAFT | 1 | |
| 2C6038G03 | WRENCH, COUPLING NUT - FAN SHAFT & AFT | 1 | |
| 2C6833G05 | WRENCH, COUPLING NUT ‐ FAN MAINTENANCE UNIT/FAN MID SHAFT | 2 | |
| 3402814-1 | ADAPTER, TORQUE WRENCH, AFT FUSELAGE LH SPLICE BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402814-2 | ADAPTER, TORQUE WRENCH, AFT FUSELAGE RH SPLICE BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3464-4 | WRENCH, COMPRESSOR EXTENSION SHAFT AND COMPRESSOR FRONT BEARING NUT SHAFT | 2 | |
| 350A93-3205-00 | MGB INPUT LOCK WRENCH- SHAFT HOLDING FIXTURE | 2 | |
| 350A93-3305-20 | TAIL REDUCTION INPUT SHAFT NUT WRENCH | 3 | |
| 50-590013 | UPPER AFT WING NUT TORQUEWRENCH ADAPTER | 1 | |
| 50-590078 | LANDING GEAR CLUTCH ADJUSTING WRENCH (BEECHCRAFT CORP) | 1 | |
| 7 ME 65 - 73761-1 | Adafter Wrench | 17 | |
| 79000708-1 | GENERATOR SHAFT NUT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7ME65-73761-1 | Adafter Wrench | 17 | |
| 856A1172G01 | WRENCH #3 BRG AIR SEAL AFT | 1 | |
| 856A3070 | WRENCH RADIAL DRIVE SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3070 G01 | Wrench ‐ Radial Drive Shaft Nut | 5 | |
| 856A3070G01 | WRENCH RADIAL DRIVE SHAFT NUT | 5 | |
| 856A3254 | WRENCH LPC AFT BLD RTNR & FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3392 | WRENCH, TORQUE - AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 2 | |
| 856A3392 G01 | Wrench Torque ‐ Aft Rotating Air/Oil Separator | 19 | |
| 856A3392 REV C | WRENCH TORQUE AFT ROTAT. AIR-OIL SEPARATOR NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3392G01 | WRENCH, TORQUE - AFT ROTATING AIR/OIL SEPARATOR NUT | 19 | |
| 856A3392G02 | TORQUE WRENCH - AFT ROTATING AIR/OIL SEPARATOR NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3582G01 | WRENCH, LPC AFT BLADE RETAINER AND FORWARD ROTATING AIR SEAL | 3 | |
| 856A3604 | WRENCH ‐ HORIZONTAL DRIVE SHAFT NUT | 2 | |
| 856A3604 P01 | Wrench ‐ Horizontal Drive Shaft Nut | 19 | |
| 856A3604 REV A | WRENCH, HORIZ. DRIVE SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3604G01 | WRENCH ‐ HORIZONTAL DRIVE SHAFT NUT | 2 | |
| 856A3604P01 | HORIZONTAL WRENCH - DRIVE SHAFT NUT | 19 | |
| 956A8684 | SHAFT NUT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8684G01 | WRENCH - TGB SHAFT NUT | 3 | |
| 98A27508050000 | WRENCH-TURNING JIG,FLAP DRIVE SHAFT | 7 | |
| 98A27808009000 | WRENCH-TURNING JIG,SLAT DRIVE SHAFT | 5 | |
| 98D71203004000 | Wrench Set AFT Engine Mount | 10 | |
| 98D712030040000 | Wrench Set AFT Engine Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D71203004202 | ENGINE AFT MOUNT WRENCH | 2 | |
| 98D71203501211 | WRENCH SET - AFT MOUNT | 5 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32045-12 | WRENCH, SPANNER, MLG AFT TRUNNION BEARING | 11 | |
| A32045-54 | WRENCH RUDDER JACKSHAFT BRG-RET NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32045-90 | WRENCH - SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71034-1 | WRENCH SET - AFT FLT MOUNT EBU-PACKAGE_[A71034-1] | 2 | |
| A71034-2 | WRENCH - AFT FLIGHT MOUNT | 3 | |
| A71034-3 | WRENCH - AFT FLIGHT MOUNT EBU PACKAGE "B" | 8 | |
| AB71001-ZT6 | WRENCH SET - AFT ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFPW38 | AIRCRAFT FUEL PUMP WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-00802-001 | WRENCH-ECCENTRIC PIN, EMERGENCY DOORADJUST THE ECCENTRIC SHAFT | 1 | |
| AGE12799 | INPUT SHAFT SPANNER WRENCH | 1 | |
| AGE12972 | ANPUT SHAFT WRENCH | 2 | |
| AGE13585 | WRENCH ASSEMBLY, INPUT SHAFT | 1 | |
| AOFW2 | AIRCRAFT OIL FILTER WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT55738 | WRENCH-NUT,AFT AXLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32013 | TORQUE WRENCH ADAPTER AFT BRG RTNR NUT MLG TRUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32013-1 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETA | 6 | |
| C32013-16 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 4 | |
| C32013-9 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| C622G3001201 | WRENCH SHAFT NUT | 1 | |
| C622G3001201/PHP | WRENCH SHAFT NUT | 1 | |
| C71001 | Specification - Wrench, Aft Conebolt Nut, CFM56-3 Engine | 7 | |
| C71001-1 | WRENCH-AFT CONE BOLT NUT | 10 | |
| C71014 | ADAPTER WRENCH INLET AFT CONE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71014-1 | WRENCH - AFT CONEBOLT NUT | 16 | |
| C71014-3 | WRENCH ADAPTER-AFT CONEBOLT NUT | 14 | |
| C71019 | WRENCH-AFT CONE BOLT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71019-1 | Wrench-Aft Cone Bolt Nut | 7 | |
| C71019-2 | WRENCH/AFT COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71019-7 | WRENCH AFT CONE BOLT NUT | 12 | |
| C71020-94 | AFT MOUNT NUT WRENCH | 2 | |
| C71022-6 | ENGINE AFT MOUNT NUT WRENCH | 17 | |
| C71026-1 | Wrench - Torque CFM56-7 Forward/Aft Engine Mount | 9 | |
| C71026-8 | WRENCH - TORQUE CFM56-7 FORWARD/AFT ENGINE MOUNT | 4 | |
| C71040-1 | AFT MOUNT WRENCH / TORQUE GSE | 5 | |
| C76002-21 | CONTROL SHAFT NUT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002-22 | RIGHT CONTROL SHAFT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002-6 | RIGHTCONTROLSHAFTWRENCH | 2 | |
| C76002-8 | CONTROLSHAFTNUTWRENCH | 2 | |
| CLE23463 | WRENCH FOR THE SLOTTED NUT OF THE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CMMT81627 | CRAFTSMAN ADJUSTABLE WRENCH 24” | 1 | |
| E-C622G3001201 | WRENCH M/R SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72887-1 | WRENCH - BOX, SAFETY LINK, AFT ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72899-1 | WRENCH EXTEND SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72899-2 | WRENCH EXTEND SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80-0-50871 | SHAFT HOLDING WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80057-1 | ADAPTER WRENCH-AFT CONE | 13 | |
| F80157-1 | Wrench -Aft Airstairs Handrail Hinge Pin | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80176-1 | ADAPTOR TORQUE WRENCH MLG TRUNNION AFT B | 5 | |
| F80176-8 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT | 13 | |
| F80176-8 | T-WRENCH ADAP. MLG TRUNNION AFT | 13 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 13 | |
| F80254 | SPECIFICATION - WRENCH BOX END RATCHET AFT CONE BO | 1 | |
| F80257-1 | WRENCH BOX RACHET AFT C. BOLT | 8 | |
| F80275-1 | WRENCH, BOX END, RATCHET - AFT CONE BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G20015-1 | WRENCH - SPANNER, SAFTEY LANYA | 5 | |
| GSE55929 | Aft axle pivot pin retaining nut wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56082 | WRENCH AFT PINTLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HCS 2037-24 | WRENCH/AFT COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HCS2037-24 | WRENCH/AFT COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HSP4411 | WRENCH - SERVO PISTON SHAFT | 2 | |
| IAG-230-02 | WRENCH FOR SHAFT ASSY NUT IGB | 1 | |
| IAG-230-03 | WRENCH SHAFT ASSY REAR STUB NUT | 1 | |
| IAG-253-02 | WRENCH FOR CF6-50 HPT BUILDUP TOOL SHAFT | 1 | |
| J212001-4 | SHAFT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J22001-4 | SHAFT WRENCH | 2 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL, STAND SHAFT ASSEMBLY | 6 | |
| K32008-133 | WRENCH, UPPER TRUNNION AFT BEARING ASSY | 3 | |
| K52026-1 | WRENCH - HOOK PULL-IN MECHANISM - FORWARD AND AFT CARGO DOOR | 7 | |
| LTCT2147 | WRENCH AND BASE ASSY(REAR COMPRESSOR SHAFT) | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT-SC4409-25 | LINKAGE SHAFT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| O-44168-3 | SHAFT WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OM1018 | SHAFT END LOCKING WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU132326 | Wrench for inner shaft | 1 | |
| PWA 16512 | WRENCH ACCESSORY AND COMPONENT DRIVE SHAFTGEAR | 1 | |
| PWA12154 | WRENCH INNER SHAFT BEARING RETAINER NUT | 5 | |
| PWA12156 | WRENCH OUTER SHAFT BEARING RETAINER NUT | 4 | |
| PWA25025 | WRENCH - TURBIN SHAFT NUT_DIA.457X102MM_[PWA25025] | 1 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA25367 | WRENCH - IMC G/B DR G/SHAFT RLR BRG NUT_[PWA25367] | 2 | |
| PWA25371 | WRENCH - G/B DRIVE G/SHAFT BALL BRG_[PWA25371] | 2 | |
| PWA25375 | WRENCH - IMC G/B DRIVE G/SHAFT_[PWA25375] | 2 | |
| PWA27273 | WRENCH - LPC DRIVE TURBINE SHAFT CAP_[PWA27273] | 2 | |
| PWA29988 | WRENCH-R I TURBINE SHAFT NUT | 1 | |
| PWC-34941- | GEARSHAFT WRENCH | 9 | |
| PWC31540 | Starter/Input Shaft Wrench | 2 | |
| PWC34941 | WRENCH FOR SPLINED SHAFT | 9 | |
| PWC6405 | WRENCH, GEARSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC64054 | WRENCH GEARSHAFT | 3 | |
| PWC65054 | WRENCH , GEARSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC67699 | WRENCH, GEAR SHAFT | 4 | |
| RB T101465 | Pillow Block Shaft Nut Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101502P | WRENCH, GEARSHAFT NUT | 1 | |
| RB T102025 | Drive Shaft Engine To Transmission Wrench Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103013 | Wrench & Adapter, Collector Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103138-101 | Internal Spline Wrench Assembly, Driveshaft Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB6795985 | Wrench-Power Turbine Shaft Ball Bearing Ret Nut | 1 | |
| RB6798980 | SHAFT SPANNER NUT WRENCH | 1 | |
| RB6893387 | Wrench, Spanner Torquemeter Shaft Nut | 1 | |
| RBEC622G3001-201 | WRENCH SHAFT NUT | 1 | |
| RBT101306 | MAIN DRIVESHAFT "XMAS TREE" WRENCH | 1 | |
| RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| RBT400340 | Gearshaft Retaining Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1098 | WRENCH SET, AFT ENGINE MOUNT | 20 | |
| RSE1098 REV B | WRENCH, SPANNER-AFT. ENG. MOUNT NUTS (EACH-I,-3,-5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1098-1 | WRENCH AFT ENG MOUNT | 11 | |
| RSE1098-1-3-5 | WRENCH SET - AFT ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1098-3 | WRENCH SET - AFT ENGINE MOUNT | 8 | |
| RSE1098-5 | WRENCH - AFT ENGINE MOUNT | 7 | |
| RSE1113 | WRENCH SET - AFT ENGINE MOUNT | 20 | |
| RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SE72-6001 | ADAPTER WRENCH AFT C | 5 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STI3249 | ADAPTER TORQUE WRENCH INPUT SHAFT, ASSY | 1 | |
| SWE 84394 | WRENCH SHAFT PROPELLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE 86072 | WRENCH - SPLINE, NO. 60 PROPELLER SHAFT THRUST BEARING NUT | 1 | |
| T101306 | MAIN DRIVESHAFT "XMAS TREE" WRENCH | 3 | |
| T101502 | WRENCH, GEARSHAFT NUT | 1 | |
| T101513 | WRENCH, TAIL ROTOR OUTPUT SHAFT NUT | 2 | |
| T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| T102136 | WRENCH ASSEMBLY, MAIN TRANSMISSION GEARSHAFT | 1 | |
| TK1817 922-4 | LOWERAFT WING BOLT WRENCH | 1 | |
| TM4992G001 | ENGINE OUTPUT SHAFT MAGNETICALLY SEALED -FIXED WRENCH | 3 | |
| TS 1176-10 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | 1 | |
| TS1171-1 | UPPER AFT WING NUT TORQUEWRENCH ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TS1171-2 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TS1176-11 | TORQUE WRENCH ADAPTER UPR AND LWR AFT ATTACH POINT | 2 | |
| TS1222-4 | WRENCH UPR AND LWR AFT WING BOLT | 2 | |
| TS1222-5 | WRENCH-UPR AND LWR AFT | 2 | |
| TS1222-5/922 | WRENCH-UPR AND LWR AFT | 1 | |
| lC6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| lC6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
