RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
020-3419-000 | TYGON TUBING, 6 FEET (2 METERS) WITH CONNECTOR | 1 | |
10800766 | VACLAV TUBING CLEANING HOSE REEL 115FT, JET NOZZLE | 3 | |
0298760050 | SAFRAN STRAIGHT TUBING CONNECTOR. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1094P5500 | NYLON 11 TUBING (COLOUR NATURAL ) 3/16"OD =.0002/-0.0055 . 0.025WALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10MM | 10X16MM CLEAR PVC TUBING (PER FOOT) | 3 | |
1120-8B-RED-500 | NYLON AIR BRAKE TUBING (TUBING, NONMETALLIC) 4FT | 1 | |
115-00057 | Pitot Test Adapter / Surgical Tubing with AN-4 Fitting | 3 | |
125HBL-4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 1 | |
125HBL4-4 | PNEUMATIC FITTING FOR OD TUBING -1/4X1/4 HOSE BARB | 1 | |
12632-001 | TUBE CUTTER(BOTH CAN BE USED FOR 1.0 INCH TUBING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
140-F-04 | TUBING TEST PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
150-00024-0000 | SHRINK TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
196T08110-401 | CONNECTIONS, TEST FIREX TUBING ENGINE | 1 | |
2-835-07-6902 | SPECIAL SURFACE PROBE, 2MHZ, Ø.098 TUBING,TRIAX CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2A/202 | TUBING CUTTER | 1 | |
2C15050 | CRF AFT SUMP TUBING LOCATING FIX | 1 | |
2C15050G02 | FIXTURE, LOCATING - AFT SUMP TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6908G01TK | FIXTURE, ALIGNMENT, GEARBOX TUBING | 1 | |
2C6998G05 | FIXTURE,ALIGMENT GB TUBING | 2 | |
2C6998G06 | FIXTURE,ALIGMENT GB TUBING | 3 | |
2C6998G08 | FIXTURE,ALIGMENT GB TUBING | 3 | |
332A97-5208-00 | CONNECTIVE TUBING,CASE/HELICOPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3469 | TUBING CUTTER WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3469 | TUBING CUTTER WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
35-0588-1 | WING HINGE PIN INSTALLATION TUBING | 2 | |
364FHA | TUBING BENDER 5/8 - 3/4" | 1 | |
367-FH | Lever Type Triple Header Tube Benders - (for 1/8", 3/16" and 1/4" tubing) | 1 | |
368-FH | Lever Type Triple Header Tube Benders - (for 1/4", 5/16" and 3/8" tubing) | 1 | |
4430 024 295 | NYLON II TUBING FLEXIBLE 3/8 OD X 0.295 ID x42"(3.5ft)/PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4CW54 | TUBING CUTTER | 1 | |
50295K382 | METRIC CARBON STEEL TUBING 18MM X 14MM X 1M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
50405K65 | NYLON TUBING BLACK 6MM OD - PER FOOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
51075K27 | NORPREN. THERMO. ELAST. TUBING 1/4IDX3/8ODX1/16W PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5231K88 | VINYL TUBING 5/8 OD X 1/2 ID BLACK PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5233K52 | SOFT VINYL TUBING 1/8 ID X 1/16 WALL PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5233K72 | PVC TUBING CLEAR 1"1/4 OD X 1" ID 20 PSI PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5238K748-25' | PVC REINFORCED TUBING 3/8 ID X 5/8 OD X 25' LG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-256-FK | USATCO 37° Single & Double Lap Flaring Tool Kit ( Includes 1: Flaring Tool, Inner-Outer Ream Tubing Cutter, Carr ) | 2 | |
5552K26 | TYGON FUEL PVC TUBING 5/16 ID X 7/16 OD PRICE PER FOOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5554K22 | TYGON TUBING 3/4 ID X 1/8 W LAB USE PRICE PER FOOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6061-T6 | ALUMINUM SEAMLESS TUBING | 1 | |
6100K137 | SS304 MICRO TUBING 1/4 OD X .028 WALL X 28" STRAIGHT LENTH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65-92528-1 | REPAIR KIT, HYDRAULIC TUBING | 4 | |
65-92528-11 | REPAIR KIT, HYDRAULIC TUBING | 1 | |
65-92528-37 | KIT-HYDRAULIC TUBING REPAIR | 1 | |
65-92528-8 | HYDRAULIC TUBING REPAIR KITS LARGE DIAMETER PARTS (1" - 1.5") | 1 | |
6633K-01 | SWAGE KIT - ROLLER, HAND; 1/4 TO 1" DIA. STAINLESS STEELTITANIUM TUBING | 1 | |
6633K01 | SWAGE KIT - ROLLER, HAND; 1/4 TO 1" DIA. STAINLESS STEELTITANIUM TUBING (STANLEY HARRISON CORP.) | 1 | |
6796992 | EXPANDER - TEFLON TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
703A95-0507-00 | TUBING ASSEMBLY,NONMETALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7831K47 | HEAT-SHRINK TUBING EXP.4.7"X RECOV.0.78" BLACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7864K23 | HEAT SHRINK POLYOLEFIN FLAME-RETARDANT THIN-WALL TUBING DIA 1/4-1/8 X 0.025 WALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8288A52 | TUBING CUTTER | 1 | |
8628K28 | STIFF NYLON TUBING 3/8 ID X 1/16 WALL PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8814641000 | TUBING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89785K51 | MECHANICAL TUBING 0.250X.035WALL SST316 X 6'LG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89895K126 | SS304 TUBING 1/4 OD X .049 WALL X 36"PER UNIT 3FT LG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89895K21 | SS304 TUBING 1/8 OD X 0.035 WALL X 6' LONG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89965K42 | ALUMINUM TUBING 1/4 OD X .035 W X 6' LENGTH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89975K23 | CARB. ST. 1020 DOM TUBING 1/4 OD X 0.035 WALL/PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89975K28 | WELDED CARBON STEEL TUBING 1/2 OD X .402 OD X 6'6 FT LG PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
906 | TUBING, POLYURETHANE | 4 | |
9455M22 | TUBING - NONMETALLIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99002490 | HEAT SHRINKABLE TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9550182172 | HEAT-SHRINK TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
987300-00 | TUBING STRETCHER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A29001001042 | BRAKE TRANSMITTER REFILLING TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A29001001044 | COLLECTOR JUNCTION TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A29001001600 | COLLECTOR JUNCTION TUBING | 1 | |
997300-00 | TUBING STRETCHER | 10 | |
A21003-1 | TUBING TEST ADAPTER - P/N A21003-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32027-6 | Hydraulic Tubing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32027-6-F | HYDRAULIC TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71002-43 | TUBING - 1X1.25X9.0 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78011-65 | STAINLESS TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78011-66 | STAINLESS TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78012-1 | WRENCH - CROWFOOT, TUBING NUT, FLOW CONTROL, THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AAG00017 | TUBING - FLEXIBLE, PLASTIC, OD 3/8", ID 1/4" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABS0836B05 | TUBING-HEAT SHRINKABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4003-6FT | LOW FREQUENCY REFLECTION, SURFACE PROBE 90°, .156"Ø TUBING, .250"Ø FLAT TIP .300" DROP BENT, 1-50KHz , SHIELDED, 416 STAINLESS STEEL, 5.0" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4058 | FORRESTER LOW FREQUENCY PROBE, REFLECTION, SHEILDED , 2-40KHZ TRIAX FISCHER CONNECTOR, .187"Ø TUBING. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
AF-4058/TF | FORRESTER LOW FREQUENCY PROBE, REFLECTION, SHEILDED , 2-40KHz, .187"Ø TUBING, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4087 | LOW FREQUENCY REFLECTION PROBE 90° .250" DROP, BENT .187"Ø 416SS TUBING. 1-50KHZ , SHIELDED, FLAT PROBE TIP, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
AF-4187 | RIGID SURFACE PROBE, 110" Ø TUBING, .630"(16mm) DROP, 1-6MHz SHIELDED, 6.0" LONG, 3.5."(90mm) WORKING LENGTH, TRIAX FISCHER CONNECTOR. IncludesTest Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4212 | LOW FREQUENCY DIFFERENTIAL SURFACE PROBE 4.0 " LONG, 2-20KHz, 90° DEGREES (RIGHT ANGLE), BENT AT 1.0" FROM THE HANDLE, .187"(3/16")" DROP, ..156"(5/32")Ø TUBING WITH A TRIAX FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4228/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, .300" Drop with a 70mm(2.75") Shaft Length and 3.0" Long Handle for a total Length of 5.75" Long Supplied with a 4 Pin Fischer Connector. Freque | 1 | |
AF-4230/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, 15mm( .475") Drop with a 79.5mm(3.12") Shaft Length Bent 20° 50.74mm(1.97") from the handle, 3.0" Long Handle for a total Length of 6.12" Long. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5022 | HIGH FREQUENCY SURFACE PROBE 1-3MHz, ABS COIL, .500 DROP,.098 TUBING, 6.0" LONG, BENT AT 30 DEG 1.0" FROM THE HANDLE, SUPPLIED WITH A MICRODOT. Includes Test Report and Certificate of Conformance. | 1 | |
AF-5063L | HOCKING HIGH FREQUENCY PROBE (LEFT) 50-500KHZ, .125"Ø TUBING,BENT 40°, RADIUS 20MM(.787"), 20° TIP, MICRODOT CONNECTOR. 8.5" LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5063R | HOCKING HIGH FREQUENCY PROBE (RIGHT) 50-500KHZ, .125"Ø TUBING,BENT 40°, RADIUS 20MM(.787"), 20° TIP, MICRODOT CONNECTOR. 8.5" LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5065 | HIGH FREQUENCY SURFACE PROBE 50-500KHz, 90°, .030" DROP, .096OD TUBING, 6.5L, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5091 | RIGID SURFACE PROBE,1-3MHZ, 90° DEGREES SHIELDED .100" DROP .125"Ø TUBING 4.5" LONG 15° DEGREES CRANK IN THE SHAFT, MICRODOT CONNECTOR. Includes Test Report and Certificate of conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5091/.093 | RIGID SURFACE PROBE,1-3MHZ, 90° DEGREES SHIELDED .500" DROP .093"Ø TUBING 4.5" LONG 15° DEGREES CRANK IN THE SHAFT, MICRODOT CONNECTOR. Includes Test Report and Certificate of conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5092 | ENCIRCLING PROBE ID 10 MM CABLE ATTACHED 6 FT LONG 16 PIN FOR NOR TEC INSTRUMENT DIFERENTIAL 800 KHZ-2MHZ FOR ( TI TUBING). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5093 | LFEC PROBE 90 DEG DROP 1.125 DIFF 6.0" LONG 1- 40KHZ TRIAX FISCHER CONNECTOR .187 TUBING. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5096/2M | SURFACE PROBE ABSSOLUTE SHEILDED, 1-3MHZ, 90° DEGREES, .200" DROP, .098"Ø TUBING, 4.0" LONG 30° DEGREES BENT AT 1.0" FROM THE HANDLE WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5097/2M | RIGID SURFACE PROBE ABSOLUTE SHEILDED 1-3 MHZ, CURVED 45° DEGREES, .490" DROP, 2.0" LONG .098"Ø TUBING WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5108 | SURFACE PROBE .100" DIA TUBING FOR CRJ200 SHIELDED SPECIAL ANGLE TRIAX FISCHER CONNECTOR 11.0" LONG 500KHZ-1MHZ, Includes Test Report and Certificate of Conformance. | 1 | |
AF-5109 | SUFACE PROBE .100" DIA TUBING SHIELDED SPECIAL ANGLE FOR CRJ200 8.5" LONG TRIAX FISCHER CONNECTOR 500KHZ-1MHZ. Includes Test Report and Certificate of Conformance. | 1 | |
AF-5126 | Foerster Shielded NFe Straight Surface Probe 200KHz-6MHz, .500" (12.7mm) long, .125"Ø Tubing. 63mm overall length. MICRODOT CONNECTOR Use 500K Shield. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5126/L00 | Foerster Shielded NFe Straight Surface Probe 200KHz-6MHz, .500" (12.7mm) long, .125"Ø Tubing. 63mm overall length. LEMO 00 CONNECTOR Use 500K Shield. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5128 | Hocking 12 pin hardwired 6.0" feet long 90° degrees reflection, .250"Ø tubing, .500" drop, 1-5KHz. Inclludes Test Report and Certificate of Conformance. Used with Hocking Phasec Series instruments | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5129 | RIGID SURFACE PROBE .118"Ø DIAMETER TUBING, 20° DEGREES, 1.0" DROP 500KHz-1MHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5133/16L | LOW FREQUENCY REFLECTION SURFACE PROBE, .187"Ø TUBING, 1.0" LONG HARDWIRD TO 16 PIN LEMO CONNECTOR 6.0' LONG, 1-5KHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5134L/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, LEFT HAND, 15.50" LONG, 1.378" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5134R/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, RIGHT HAND, 15.50" LONG, 1.378" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5135L/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, LEFT HAND, 10.0" LONG, 1.535" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5135R/2MHZ | SURFACE PROBE 90° DEGREES, .030" DROP .125" Ø TUBING, RIGHT HAND, 10.0" LONG, 1.535" RADIUS WITH MICRODOT CONNECTOR 1-3MHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5146/2MHZ | RIGID SURFACE PROBE ABS SHEILDED 90° DEGREES .200" DROP, .098"Ø TIP .156"Ø TUBING REDUCED TO .079 AT THE TIP, 4.0" LONG WITH MICRODOT CONNECTOR 1-3MHZ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5146/L00 | RIGID SURFACE PROBE ABS SHEILDED 90° DEGREES .200" DROP, .098"Ø TIP .156"Ø TUBING REDUCED TO .079 AT THE TIP, 4.0" LONG WITH LEMO 00 CONNECTOR 1-3MHZ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5158/L500K | SURFACE PROBE ABSOLUTE SHEILDED, LOCATOR 500K. 90° DEGREES, .500" DROP, .175"Ø TUBING, (47uH) 6.0" LONG 15° DEGREES BENT AT 1.0" FROM THE TIP WITH A MICRODOT CONNECTOR. .125 SHAFT OD. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5166 | OD ENCIRCLING PROBE, DIFFERENTIAL 1-6MHZ, 1/8" TUBING OD. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5167 | OD ENCIRCLING PROBE, DIFFERENTIAL 1-6MHZ, 1/4" TUBING OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5168 | OD ENCIRCLING PROBE, DIFFERENTIAL 1-6MHZ, .375" TUBING OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5176 | LOW FREQUENCY SURFACE PROBE 1-5KHz, REFLECTION, .500 DROP,..312"Ø(8mm) TUBING, 8.27" (210mm)LONG, MICRODOT BENT 65mm FROM THE HANDLE Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5224/2MHZ | SURFACE PROBE .070"Ø TUBING ABS SHIELDED 90°, .300" DROP, 6.0" LONG, , 1-3MHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.4 PG.3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5225/500K | RIGID SURFACE PROBE .062"Ø TUBING ABS SHIELDED 90°, 60° Joggle.020" DROP, 6.0" LONG, , 500KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.4 PG.4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5227 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 4 PIN FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5227-1 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 1 METER LONG HARDWIRED CABLE ATTACHED TO A TRIAX FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5243 | SURFACE PROBE WITH .050" DIAMETER TUBING. 35 DEGREES .500" DROP SHAFT 5.0" LONG TRIAX FISCHER CONNECTOR. .5” TIP. 50-500KHz. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5255 | RIGID SURFACE PROBE 100KHz-1MHz, BENT RIGHT 30° AT 7.5" FROM THE TIP, 115° 1.0" DROP, .094"Ø TUBING, 13.5" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5256 | RIGID SURFACE PROBE 100KHz-1MHz, BENT RIGHT 30° AT 7.5" FROM THE TIP, 115° 1.0" DROP, .094"Ø TUBING, 13.5" LONG WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5279 | Low Frequency Pencil Probe, Shielded 100KHz-500KHz, 90°, .100" Drop, .150"Ø Tubing diameter, 12.0" Long with a 4.0" Long handle supplied with a Triax Fischer / Lemo Connector. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-561A | RIGID SURFACE PROBE 50-500KHz, BENT LEFT 60° AT 1.0" FROM THE TIP, .030" DROP, .125"Ø TUBING, 6.0" LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-561B | RIGID SURFACE PROBE 50-500KHz, BENT DOWN 90° AT 1.0" FROM THE TIP, .030" DROP, .125"Ø TUBING, 6.0" LONG WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-561C | RIGID SURFACE PROBE 50-500KHz, BENT UP 60° AT 1.0" FROM THE TIP, .030" DROP, .125"Ø TUBING, 6.0" LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AN818-4J | NUT 1/4 TUBING 7/16-20 UNF SST | 1 | |
AN929-4J | CAP ASSÕY PRESSURE SEAL 1/4Ó TUBING | 24 | |
AN929-5J | CAP ASSY, 1/2 TUBING, CRESSCAP (TYPE 304) | 12 | |
AP-3/50K | LOW FREQUENCY PROBE STRAIGHT, DIFFERENTIAL, .187Ø OD TUBING 3.0" LONG 30-50KHz WITH TRIAX FISCHER CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-4.5 | STRAIGHT SHIELDED SURFACE PROBE 50-500KHz WITH MICRODOT CONNECTOR.114mm LONG .187" DIA. TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-4.5/200K | RIGID STRAIGHT SURFACE PROBE,ABS,SHIELDED, MICRODOT CONNECTOR 4.5" LONG 20-200KHZ..4.5"LONG, 20-200KHZ, Fe/NFe, L=114mm(4.5""), Tip 4.35mm(.187"Ø) WITH MICRODOT CONNECTOR. .187"Ø TUBING. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-65-6B | Surface Probe 60 Degree 0.5 drop 6.0" Long Bent with Microdot connector 50-500K HZ (.187 dia tubing) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-93-5B/2-12K | SURFACE PROBE 90° DEGREES, .187"Ø TUBING .300" DROP 5.0" LONG BENT SHAFT TRIAX FISCHER CONNECTOR.2-12KHZ DIFFERENTIAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-93-5B/2-12K/4F | SURFACE PROBE 90° DEGREES, .187"Ø TUBING .300" DROP 5.0" LONG BENT SHAFT, 4 PIN FISCHER CONNECTOR.2-12KHZ DIFFERENTIAL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP475-4.5/L500K | SURFACE PROBE 45 DEGREES .750" CRANK 4.5" LONG HOCKING LOCATOR 500K MICRODOT CONNECTOR .187" OD TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-10 | RIGID STRAIGHT SURFACE PROBE, 10" Long, 50-500KHz, .125"Ø TUBING WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-10FX | STRAIGHT FLEXIBLE SURFACE PROBE, 10" Long, 50-500KHz, .125"Ø TUBING WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-12 | RIGID STRAIGHT SURFACE PROBE 50-500KHz, .125"Ø TUBING WITH MICRODOT CONNECTOR, 12.0" LONG. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-4/7L | STAINLESS STEEL SHAFT SURFACE PENCIL PROBE .125" DIA TUBING 4 .0" LONG 7 PIN LEMO CONNECTOR (POWER LINK) 50-500KHZ Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-4/7L/500KHZ | POWER LINK METAL SHAFT SURFACE PROBE .125" DIA TUBING 4 .0" LONG 7 PIN LEMO CONNECTOR 200KHZ-1MHZ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-45-4.5/.500KHZ | RIGID SURFACE PROBE 45° DEGREES .500" DROP 4.5" LONG .125" Ø DIA TUBING MICRODOT CONNECTOR 50-500KHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-45-6-QMDFX | RIGID SURFACE PROBE 50-500KHz, 45 DEG, .500" DROP, 6" LONG, QUICK DISCONNECT MICRODOT, FLEX SHAFT TUBING. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-5FX/200K-1MHZ | Flexible Surface Pencil Probe, absolute shielded, frequency: 200KHz-1MHz with the center frequency 500KHz. Measurement head diameter tubing 0.125"Ø inch (3.18mm). Total length: 5 inches (12.7cm). L00 cable connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-7FX | STRAIGHT FLEXIBLE SURFACE PROBE, .1/8"DIA TUBING 50-500KHZ, 7.0" LONG. MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
APN-8FX | STRAIGHT FLEXIBLE SURFACE PROBE, .1/8"DIA TUBING 50-500KHZ, 8.0" LONG. MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-8FX/7L/1-6MHZ | STRAIGHT FLEXIBLE SURFACE PROBE, .1/8"DIA TUBING 50-500KHZ, 8.0" LONG. 7PIN LEMO. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
APN-903-3/4L | RIGID SURFACE PROBE ABSOLUTE SHIELED, 20-200KHz, .125"Ø TUBING 90° DEGREES , .030" DROP 3.0" LONG WITH 4 PIN LEMO CONNECTOR 20-200KHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-903-7/500K | RIGID SURFACE PROBE, .030" DROP, .125"Ø TUBING, 200KHz-1MHz WITH A 500khz CENTER FREQUENCY, 7.0"(177.8mm) LONG WITH A 4.0"(101.6mm) WORKING LENGTH SUPPLIED WITH A MICRODOT CONNECTOR 200KHz-1MHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-91-5.5/2MHZ | RIGID SURFACE PROBE ABSOLUTE, 1MHz-3MHz, 90° .072"Ø OD TUBING .100" DROP, 5.5" LONG, MICRODOT CONNECTOR. Iincludes Test Report and Certificate of Conformance. | 1 | |
APN-925/93-4.5/6MHZ | SURFACE PROBE 45° DEGREES, .250" DROP .093"Ø TUBING, 4.5" LONG SHIELDED 6MHz WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-9375-6 | SURFACE PROBE. 90 DEG. 3/8 DROP. 1/8" DIA TUBING. 6" LONG. MICRODOT CONNECTOR. 50-500 kHZ. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-95-11 | RIGID SURFACE PROBE 50-500KHZ, 90° .500" DROP, .125"Ø TUBING, 11.0" LONG WITH A MICRODOT CONNECTOR.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APN-95-8/2MHZ | RIGID SURFACE PROBE 90° DEGREES, .125"Ø TUBING, .500" DROP, 8.0" LONG WITH MICRODOT CONNECTOR. 1-3MHz.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APNU-5/200KHZ | ABSOLUTE UNSHIELDED STRAIGHT PENCIL PROBE .093"Ø TUBING. 5" LONG MICRODOT CONNECTOR 50-500KHz. Includes Test Report | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APR-4/1-50KHZ | LOW FRQUENCY REFLECTION SURFACE PROBE .250"Ø DIA TUBING 1-50KHz, 4.0" LONG WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate Report. | 1 | |
AS1654T32 | SLEEVE, WASTE TUBING | 5 | |
ASPN-45-2/2M | RIGID SURFACE PROBE 45° 1-3MHz, .093"Ø" DIA TUBING, .500" DROP, 2.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATPNR-93-6 | RIGID SURFACE PROBE, REFLECTION, 90° DEGREES, .125"Ø TUBING, .300" DROP 6.0" LONG 50-500KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AXPN-5FX | FLEXIBLE SURFACE PROBE - STRAIGHT, ABS. SHIELDED, 5.0" (127mm) .072" OD TUBING. LONG WITH MICRODOT CONNECTOR. FREQUENCY: 50-500KHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B-44-4X | TYGON TUBING 3/8 ID X 1/2 OD | 1 | |
BSTS-07X4 | SIGMAFORM TUBING .750-.220 19MM-5.6MM (PER FOOT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C26005-19 | TUBING HEAT SHRINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78018-11 | TUBING INSULATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78018-37 | TUBING INSULATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78018-38 | TUBING INSULATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78018-39 | TUBING INSULATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CAP | 1000 OF BLACK VINYL (RUBBER) ROUND END TUBING CAPS VARIES SIZES 1/4",3/8",3/4" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CTSG861-6 | HEAT SHRINK TUBING TIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D12532-001 | TUBE CUTTER(BOTH CAN BE USED FOR 1.0 INCH TUBING) | 6 | |
DAT08AEFKT5003 | REPAIR KIT, HYDRAULIC TUBING (TEMP. REPAIRS, OPERATING PRESSURES UP TO AND INCLUDING 3000 PSI) (APPROVED FOR TITANIUM) | 3 | |
DC4NNN-02 | TUBING/BRAKE/BATTERY TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DLTFRPSKT3001 | PERMASWAGE TUBING KIT | 7 | |
DLTFRPSKT3001 DMC | PERMASWAGE TUBING KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DLTFRPSKT3014 | PERMASWAGE TUBING REPAIR KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E-3469 | TUBING CUTTER WHEEL | 1 | |
E902-355 | HEAT SHRINK TUBING BLACK 160 PC 4" | 1 | |
E902-460 | HEAT SHRINK TUBING COLORS 160 PC 4" | 1 | |
EEDF5033 | 1/8IN MNPT W/CLEAR TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEDF5034 | STD SCHRADER W/CLEAR TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEFI5001P3 | CLEAR TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ENE45126 | TUBING 8INx3/8IN OD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ENE45136 | TUBING 12INx3/8IN OD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EPR TEST LEADS&TUBE | EPR TEST SET LEADS & TUBING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71329-30 | Tubing - Tygon | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71329-31 | Tubing - Tygon | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71329-32 | Tubing - Copper | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71329-33 | Tubing - Copper | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71329-34 | Tubing - Copper | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80166-9 | TUBING, SHRINKABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FG31X20FT | PVC CLEAR TUBING X 20FT LG. PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FPNS96-6B | Defectometer Surface Probe w/30 degree Bend, .098" tubing, .6" drop, 6" long, NFE, Shielded | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G26008 | TEST EQPT- NON-METERED DISCHARGE TUBING, CARGO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G26008-13 | TEST EQUIPMENT - NON-METERED DISCHARGE TUBING, CAR | 1 | |
G601R282001-49 | TUBING, FLEXIBLE | 1 | |
GENS106 | SPRING TUBING BENDER SET SPRI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS58W68-4-2 | TUBING, HEAT SHRINK | 1 | |
GS58W68-6-1 | PLASTIC TUBING | 1 | |
GS58W68-7-1 | PLASTIC TUBING | 1 | |
GSE55917-102 | 4140 STL ROUND TUBING OR EQUIV. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE56007-411 | RND MECH TUBING AISI 1018 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GTD-600 | DEKORON BENDABLE TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HRR76700 | PVC TUBING CUTTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS32-1-10 | POLYURETHANE TUBING SIZE 10 HYDRAFLOW 24964 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT-150-48-5-NOIR | SHRINK TUBING 1.5" X 0.040 PRICE PER FOOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT100-48-5-NOIR | SHRINK TUBING 1" NOIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT150-48-5C | SKRINK TUBING 1"1/2 ÕCLEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT50-48-5-4 | SHRINK TUBING ¿1/2Ó YELLOW 48ÓLG PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT50-48-5C | SHRINK TUBING CLEAR 1/2¿ X 4'LG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT50-6-5-6 | SHRINK TUBING ¿1/2 X 6" COLOR BLUE PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT50-6-5BLACK | SHRINK TUBING ¿1/2 X 6 BLK PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSTT75-48-5 | SHRINK TUBING 3/4 Ò NOIR PRICE PER FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J20009-118 | FORKLIFT TUBING ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J21003-1 | TEST EQUIPMENT - FIRE EXTINGUISHING TUBING, CARGO COMPARTMENT | 12 | |
J26005 | TEST EQUIPMENT-FIRE EXT TUBING,CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J26005-1 | Test Equipment -Fire Extinguisher Tubing. Cargo Compartment | 4 | |
J26005-19 | TEST EQUIPMENT - FIRE EXTINGUISHER TUBING, CARGO COMPARTMENT | 1 | |
J26005-24 | Test Equipment -Fire Extinguisher Tubing. Cargo Compartment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J26005-32 | Test Equipment -Fire Extinguisher Tubing. Cargo Compartment | 3 | |
J26009-1 | TEST EQPMT FIRE EXT TUBING CARGO COMPT | 3 | |
J26009-16 | TEST EQUIPMENT - FIRE EXTINGUISHING TUBING, CARGO COMPARTMENT | 6 | |
K26001 | TEST EQUIPMENT-FIRE EXT TUBING,CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K26001-1 | CARGO FIRE EXIT TUBING TEST EQT | 3 | |
K26001-20 | TEST EQUIPMENT - FIRE EXTINGUISHING TUBING, CARGO COMPARTMENT | 4 | |
K26001-23 | Test Equipment - Fire Exit Tubing, Cargo Compartment | 6 | |
LIL44070 | 1/4IN TUBING BENDING PLIERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL44150 | 3/16 TUBING BENDER PLIERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M22706-S-30 | GUARD, HOSE-TUBING | 1 | |
M23053/11-103C | Installation Tubing | 1 | |
MAS35017 | SHRINK TUBING ATTACH TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MN101-20 | OLIVE, TUBING END CAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS21914-3 | CAP PRESS & TUBING 16112 | 13 | |
MS51534B12-8S | ¾†TUBING REDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N2777-02 | ELBOW, MALE PIP/TUBING, | 2 | |
NSA937211-005B | TUBING HEAT SHRINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
POLYRET. TUBING 3/8IDX1/2ODX100 | POLYRETHYLENE TUBING 3/8" ID X 1/2 OD X 100" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PVC-105 | #7 CLEAR PVC TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC34910-800J | TUBING,NONMETALLIC | 3 | |
PWC34910-802J | TUBING,NONMETALLIC | 1 | |
PWC34910-804J | TUBING,NONMETALLIC | 1 | |
R3603 | PLASTIC TUBING | 1 | |
RIG36132 | RIDGID 1/2IN TUBING BENDER 408 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RNF-100-1/2-2-STK | GAINE HEAT SHRINK TUBING - RED | 1 | |
RNF-100-1/2-4-STK | GAINE HEAT SHRINK TUBING - YELLOW | 1 | |
RNF-100-1/2-6-STK | GAINE HEAT SHRINK TUBING - BLUE | 1 | |
RNF-100-1/2-9-STK | GAINE HEAT SHRINK TUBING - WHITE | 1 | |
RNF-100-1/4-0 | BLACK HEATSHRINK TUBING 6.4MM | 2 | |
RNF-100-3/8-BK-STK | HEAT SHRINK TUBING AND SLEEVES (METRE) | 1 | |
RNF100 TYPE1-3/8 BLACK | HEAT SHRINK TUBING AND SLEEVES (METRE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RNF100-1/2BLUE | GAINE HEAT SHRINK TUBING - BLUE | 1 | |
RNF100-1/2RED | GAINE HEAT SHRINK TUBING - RED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RNF100-1/2WHITE | GAINE HEAT SHRINK TUBING - WHITE | 1 | |
RNF100-1/2YELLOW | GAINE HEAT SHRINK TUBING - YELLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RTSK8-02-005 | TUBING REPAIR TOOL KIT | 3 | |
RXF32SP | 1IN COMBO TUBING WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAG14860 | TUBING BENDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPD41576 | BENT TUBING W/3/8"INVRT FL NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPD74425 | HOSE W REL VALVE AND TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPD74446 | RELIEF VALVE & TUBING ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-3C | WRENCH TORQUE TUBING OXY 5/8 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-44C | WRENCH TORQUE TUBING OXY 70IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-49A | TORQUE TUBING OXY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-4C | WRENCH TORQUE TUBING OXY 190 I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-52C | WRENCH TORQUE TUBING OXY 9/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-57A | WRENCH TORQUE TUBING OXY 1-1/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2599C-74A | WRENCH TORQUE TUBING QXY 1-1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST8709H-KIT | TUBING GAUGES | 1 | |
ST878D | KIT - PRESET TUBE FITTING, "SLEEVE SET", FOR PRESETTING BACS13AP FLARELESS TUBE FITTING (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 9 | |
ST879A | Kit - Preset Tube Fitting, "Sleeve Set", (Not For Titanium Tubing) (Set Of 25 Ea. Dies, Mandrels, & Clamps) | 8 | |
ST879A-1 | KIT - PRESET TUBE FITTING, "SLEEVE SET", (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 1 | |
STD-1307 | TOOL – OVER-CENTERING, MLG UPLOCK HOOK (0.500” DIA X 24” METAL ROD, WITH PROTECTIVE RUBBER TUBING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-774 | �TOOL - ANTICOLLAPSE, TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-7744 | TOOL - ANTICOLLAPSE, TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-35236 | TUBING CUTTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TBS200A | BENDER, TUBING, MULT | 3 | |
TBS300 | TUBING BENDE | 1 | |
TEK-2048 | Special Surface Probe, 2MHz, Ø.098 tubing,Triax connector | 1 | |
TF-1153 | TUBING, PTFE 1/4 | 1 | |
TF528D | TUBING TOOL SET | 2 | |
TSF29T-01001-4 | TEST SUPPORT FIXTURE, HYDRAULIC TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TYGONTUBING1/2IDX5/32WCLEAR | TYGON TUBING 1/2ID X 5/32 WALL CLEAR/FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WP00049R | TUBULAR TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA4008-6 | 3 EA CLEAR TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1120-8B-RED-500 | NYLON AIR BRAKE TUBING (TUBING, NONMETALLIC) 4FT | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.