| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1-1901611-1 | CERTI-CRIMP HAND TOOL ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1404 | PISTON SLEEVE BACKUP RETAINER AND O-RING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12MIT65B01231-1 | INSTALLATION TOOL - RESTRICTOR SUPPORT TUBE ASSY, BODY LANDING GEAR SHOCK STRUT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1548190AT1-3 | CHECK VALVE ASSEMBLY TOOL HANDLE (IS PART OF ASSEMBLY TOOL, 1548190AT1-101) | 1 | |
| 1901600-1 | TE Connectivity 1901600-1 Long CERTI-Crimp Hand Tool Assembly - 18-16 AWG | 1 | |
| 1901600-2 | TE Connectivity 1901600-2 Short CERTI-Crimp Hand Tool Assembly - 18-16 AWG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9390G01 | FIXTURE ASSEMBLY BHGE 1C9390G01 FOR LIFT AND TURN - VIGV USED IN WP 2110 00 SPECIAL TOOL FOR INLET GIDE VANE (IGV) ASSEMBLY REPLACEMENT T | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-3403-211 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING REDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-3410-02 | TOOLING ASSEMBLY,HANDLING,N°3 (ICO 13-10-10-03) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A93-3501-00 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING,PLANET G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A94-3182-00 | TOOLING ASSEMBLY,LANDING GEAR (ICO 13-30-90-02) C | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006409 | TOOL - ASSEMBLY AND EXTRACTION | 1915 | |
| 46988 | HAND CRIMP TOOL ASSEMBLY FOR STRATO-THERM TERMINAL 16-14 | 14 | |
| 413987 | INSTALLATION TOOL - NOSE LANDING GEAR (ASSEMBLY 409338-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 413987 IS INCLUDED IN INSTALLTION KIT 426696) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 426665 | INSTALLATION TOOL - MAIN LANDING GEAR (ASSEMBLY 409337-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 426665 IS INCLUDED IN INSTALLATION KIT 426696) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006409 | TOOL - ASSEMBLY AND EXTRACTION | 11 | |
| 460006410 | TOOL - ASSEMBLY AND EXTRACTION | 4 | |
| 703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N°1 (ICO 13-10-00-01) HOISTING SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 801386-S51-9 | T-HANDLE MANIFOLD - ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3573G03 | STOOL, ASSY/DISASSY - NO. 1 AND NO. 2 BEARING SUPPORT (ASSEMBLY/DISASSEMBLY STOOL) | 2 | |
| 956A7651G02 | KIT, SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLYSLIDE HAMMER AND ADAPTER TOOL (LEAP) | 1 | |
| ABB999-30SE1 | Tool -Removal, Fuel Filter Assembly, GE90-70/80/90 Series And GE90-100 Series | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32077-1 | REMOVAL TOOL ASSEMBLY - GLAND NUT, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C75002-26 | HAND TOOL SET- CONTROL STAND, DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002 | HAND TOOL SET-CONTROL STAND,DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002-20 | TOOL SET - CONTROL STAND DISASSEMBLY | 1915 | |
| C76002-24 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | 2 | |
| C76002-25 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | 1915 | |
| C76002-26 | Hand Tool Set - Control Stand, Disassembly/Assembly | 4 | |
| C76002-35 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-04F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-06F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-08F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-10F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-12-12F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-12-14F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-13-16F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-22-12F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-22-14F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-23-16F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-23-18F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-23-20F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-22F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-24F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-26F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-25-28F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-25-30F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRK520B | Removal Tool Handle Assembly - M81969/30-20 REV B | 1 | |
| F28080000 | INSTALLATION TOOL FOR THE INNER HALF WHEEL ASSEMBLY (2-010) AND OUTER WHEEL ASSEMBLY (3-010) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F5740 | TOOL-GLAND ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S | 4 | |
| H8603 | Assembly - Hand Tool | 1 | |
| H8603-10 | ASSEMBLY - HAND TOOL | 2 | |
| J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 1915 | |
| KBC-040-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-041-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-042-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-043-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-044-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-060-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-061-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-062-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-063-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-080-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-081-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-082-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-083-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-100-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-101-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-102-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-103-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-120-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-121-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-122-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-123-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MHC75B | HAND TOOL BASIC ASSEMBLY - 08 | 1 | |
| MHC75P-8AA | COMPLETE HAND TOOL ASSEMBLY PH-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBE703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N°1 (ICO 13-10-00-01) HOISTING SLING | 1915 | |
| RRT048964 | ASSEMBLY TOOL (FOR SB 72-G262 STANDARD QUILL SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT050449 | ASSEMBLY TOOL - IPNGV BUILD STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT053073 | LIFT TOOL - LIFT/IMMOBILISE NGV ASSEMBLY AND OUTER CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT103901 | OVER FILL TOOL - OVERSPILL HOSE AND COUPLING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1066-24 | STANDARD TOOL - ASSEMBLY AID, GAP COVER SEAL 737 HORIZ STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2613A | STANDARD TOOL-ASSEMBLY TOOLS,737 SLAT DOWNSTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST8709H-1 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | STANDARD TOOL -GO/NO-GO GAUGE. FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST8709H-2 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 1915 | |
| ST8709H-3 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 3 | |
| ST8709H-4 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 1915 | |
| ST8709H-5 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 3 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 3 | |
| ST8709H-7 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 3 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COWL FAN | 1 | |
| T0100738 | TOOLS-MD11 LANDING GEAR DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VDA1-19 | ASSEMBLY TOOL FOR SEALS AND O-RINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WCI-1700N-06F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | 1915 | |
| WCI-1700N-08F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | 1915 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
