| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A11138 | TOOL - ASSEMBLY | 2 | |
| A11139 | TOOL - ASSEMBLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DAPT60-0347-00 | TOOL-BALL ASSEMBLY | 7 | |
| 0850-3094A000 | ASSEMBLY-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U144930 | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144934 | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144934PM | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144950 | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144950PM | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144961 | SEAL-ASSEMBLY TOOL | 1 | |
| 0U144961PM | SEAL-ASSEMBLY TOOL | 1 | |
| 0U145055 | SEAL-ASSEMBLY TOOL | 1 | |
| 0U145419 | ASSEMBLY-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U145504 | SEAL-ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U145505 | SEAL-ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U147990 | SEAL-ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U300518 | TOOL-ASSEMBLY OF CUPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1-1901611-1 | CERTI-CRIMP HAND TOOL ASSEMBLY | 1 | |
| 114-1321 | ASSEMBLY TOOL, O-RING & BACKUP RING (2-1599) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1404 | PISTON SLEEVE BACKUP RETAINER AND O-RING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1159SEL40001-1 | FILTER SHUT-OFF ASSEMBLY TOOL | 1 | |
| 12MIT65B01231-1 | INSTALLATION TOOL - RESTRICTOR SUPPORT TUBE ASSY, BODY LANDING GEAR SHOCK STRUT ASSEMBLY | 1 | |
| 1548190AT1-3 | CHECK VALVE ASSEMBLY TOOL HANDLE (IS PART OF ASSEMBLY TOOL, 1548190AT1-101) | 1 | |
| 161-6003-10 | CUTTER, DISC-ASSEMBLYWELD-MACHINING-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-100 | HOLDER, DISC- ASSEMBLY WELD- MACHINING-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-13 | CUTTER, DISC ASSEMBLY WELD-MACHINING-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-18 | CUTTER, DISC- ASSEMBLY WELD- MACHINING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-300 | HOLDER, DISC ASSEMBLY WELD-MACHINING-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-400 | TOOL HOLDER DISC ASSEMBLY WELD-MACHINING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 161-6003-7 | CUTTER, DISC ASSEMBLY WELD-MACHINING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 16A14229L1-1 | TOOL ASSEMBLY, HOLDING-ISA RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1738894-1 | TE CONNECTIVITY 1738894-1 QUADRAX CONTACT ASSEMBLY TOOL | 6 | |
| 1901600-1 | TE Connectivity 1901600-1 Long CERTI-Crimp Hand Tool Assembly - 18-16 AWG | 5 | |
| 1901600-2 | TE Connectivity 1901600-2 Short CERTI-Crimp Hand Tool Assembly - 18-16 AWG | 4 | |
| 1C5868 | TOOL SET - INLET, DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C5868G01 | TOOL SET - INLET, DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8090 | TOOL SET, DYNAMIC BALANCE - PT ROTOR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9302G02 | TOOL SET, ASSEMBLY, INSTALL -BALANCE PISTON SEALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9353 | TOOL SET ASSEMBLY - RIGGING BY-PASSVALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9390G01 | FIXTURE ASSEMBLY BHGE 1C9390G01 FOR LIFT AND TURN - VIGV USED IN WP 2110 00 SPECIAL TOOL FOR INLET GIDE VANE (IGV) ASSEMBLY REPLACEMENT T | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 229755-1 | VS-3 TOOL HOLDER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 29-90-114-10 | DRIVER ASSEMBLY - TOOLHEAD | 3 | |
| 2ATH10471101 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2ATH10505001 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2ATH10505008 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6968 | TOOL - ASSEMBLY REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B81132 | RESTRAINING TOOL - OUTBOARD TRAILING EDGE FLAP DRIVE POWER UNIT ASSEMBLY | 1 | |
| 3042000AT2 | ASSEMBLY TOOL - BEARING CHECK | 1 | |
| 330A93-3403-201 | TOOLING ASSEMBLY,LOADING (ICO 13-10-70-05) STRIP0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-3403-211 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING REDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-3410-02 | TOOLING ASSEMBLY,HANDLING,N°3 (ICO 13-10-10-03) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A93-3201-00 | DISASSEMBLY/RE-ASSEMBLYTOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A93-3501-00 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING,PLANET G | 1 | |
| 332A93‐3686‐01 | TOOLING ASSEMBLY,LOADING (ICO 13-10-70-05) STRIP0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A94-2790-00 | TOOLING ASSEMBLY,MECH ASSY VAR ,N°1 (ICO 13-30-30-03) BONDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A94-3182-00 | TOOLING ASSEMBLY,LANDING GEAR (ICO 13-30-90-02) CHECK GAGE 000 | 1 | |
| 332A95-5290-00 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) ASSEMBLY BLOCK | 1 | |
| 332A97-5205-001 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) BASE0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2997 | TOOL-ASPIRATOR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4100-009 | ASSEMBLY TOOL - LINK ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412-201-701-101 | TOOL ASSEMBLY (412-201-701-101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006409 | TOOL - ASSEMBLY AND EXTRACTION | 17 | |
| 7821 | TOOL-HOLDING VALVE DURING ASSEMBLY | 2 | |
| 46988 | HAND CRIMP TOOL ASSEMBLY FOR STRATO-THERM TERMINAL 16-14 | 19 | |
| 69066 | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL (TYCO ELECTRONICS CORP. (FORMERLY AMP, INC.)) | 5 | |
| 413987 | INSTALLATION TOOL - NOSE LANDING GEAR (ASSEMBLY 409338-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 413987 IS INCLUDED IN INSTALLTION KIT 426696) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 426665 | INSTALLATION TOOL - MAIN LANDING GEAR (ASSEMBLY 409337-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 426665 IS INCLUDED IN INSTALLATION KIT 426696) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 716557 | SEAL - TOOL FOR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 716558 | SEAL - TOOL FOR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 83700157 | O-RING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006409 | TOOL - ASSEMBLY AND EXTRACTION | 17 | |
| 460006410 | TOOL - ASSEMBLY AND EXTRACTION | 10 | |
| 460007159 | TOOL-ASSEMBLY EXTRACTION | 5 | |
| 4610095509 | Assembly-Disassembly Tool | 1 | |
| 4617001755 | DISASSEMBLY TOOL-FANASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4617001955 | TOOL - DISASSEMBLY, UNIVERSAL IMPELLOR | 1 | |
| 4617001955 | B-FAN DISASSEMBLY TOOL | 1 | |
| 4617001955 | B-FAN DISASSEMBLY TOOL | 1 | |
| 4ME65B00731 | TOOL ASSEMBLY - COLD GAP GO/NO-GO, JT9D POWER PLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62100-2501 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62100-2502 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62100-2601 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62100-2602 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8661 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8662 | Backplane Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8663 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 16-Column Assemblies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8666 | Press-In Tool for Power Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8668 | Press-In Tool for Power Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8669 | Press-In Tool for Power Module Assembly, 6-Pair Assemblies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8717 | Press-In Tool for Power Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8718 | Press-In Tool for Power Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8856 | Press-In Tool for Impact™ Signal Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8857 | Press-In Tool for Impact™ Signal Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8859 | Press-In Tool for Impact™ Signal Module Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8879 | Impact™ Backplane Press-In Tool for Impact™ 85 Ohm Vertical Backplane Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62201-8988 | Impel™ Backplane Assembly Press-In Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62202-4800 | I-PASS™ zHD Vertical Housing Assembly Removal Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62202-4900 | I-PASS™ zHD Wafer Assembly Removal Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62203-0070 | Press-In Tool for XFP Cage Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62203-0120 | Press-In Tool Vertical CXP HSC Connector Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62203-0700 | Press-In Tool for zHD Connector Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N??1 ICO 13-10-00-01 H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 703A94-0000-00 | TOOLING, ASSEMBLY MECH ASSY MAINT (ICO 13-30-10-01) | 1 | |
| 703A95-0507-001 | ASSEMBLY OF EXTRACTING TOOLS (ICO 13-30-40-01) SECURING WASHE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 79001390-1 | ASSEMBLY TOOL, O-RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7MIT65B01503 | TOOL INSTALLATION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 8007885100 | TOOL - TEMPLATE, CHECKING ASSEMBLY,BLADE EROSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 801386-S51-9 | T-HANDLE MANIFOLD ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8168-IA | WRENCH- FUEL NOZZLE DISASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 820-415-919 | TOOL-DISASSEMBLY AID | 1 | |
| 856A1130P12 | PL-2262 SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 10 | |
| 856A2004 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2004G01 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2004G02 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS (ASSEMBLY TOOL) | 4 | |
| 856A2359G01 | STOOL, ASSEMBLY/DISASSEMBLY - LPT MAINTENANCE MODULE (STOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2591G01 | HORIZONTAL ASSEMBLY TOOL - DRIVE SHAFT | 1 | |
| 856A2640 | TOOL SET ASSEMBLY - RING OIL SEPARATOR (TOOL SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2640G01 | Tool Set Assembly - Ring Oil Separator (tool set) | 8 | |
| 856A2823 | AXIAL CHECKING TOOL-LPT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2823G01 | AXIAL CHECKING TOOL - LPT ASSEMBLY | 3 | |
| 856A2823G02 | AXIAL CHECKING TOOL - LPT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2956G01 | Assistance Tool -The Ring Fan Assembly | 15 | |
| 856A3486G01 | ASSEMBLY TOOL - SEAL, CENTER VENT TUBE (SEAL ASSEMBLY TOOL) | 6 | |
| 856A3573G03 | STOOL, ASSY/DISASSY - NO. 1 AND NO. 2 BEARING SUPPORT (ASSEMBLY/DISASSEMBLY STOOL) | 11 | |
| 856A3576G02 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | 14 | |
| 856A3735G03 | Tool Set, Guide Pin Booster Vane Assembly STG 2-3-4 | 8 | |
| 856A3746 | TOOL, ASSEMBLY/DISASSEMBLY - RADIAL DRIVE SHAFT (ASSEMBLY/DISASSEMBLY TOOL) G01, G02 OR G03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3746G02 | TOOL, ASSEMBLY/DISASSEMBLY - RADIAL DRIVE SHAFT (ASSEMBLY/DISASSEMBLY TOOL) | 1 | |
| 856A3746G03 | TOOL, ASSEMBLY/DISASSEMBLY - RADIAL DRIVE SHAFT G01, G02 OR G03 | 3 | |
| 8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 90296-2 | CRIMP TOOL - TE (S.A.H.T. ASSEMBLY) | 1 | |
| 90300-2 | CRIMP TOOL - TE (S.A.H.T. ASSEMBLY) | 5 | |
| 956A1509 | TOOL SET - ASSEMBLY - INLET GEAR BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1510 | TOOL SET - ASSEMBLY - PINNION GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1521 | TOOL SET - IGB ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A3534 | TOOL SET - ASSEMBLY - IGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7645 | TOOL SET - GUIDE PINS - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7645G01 | Tool set，guide pins-engine assembly broches d'alignement assemblage moteur | 1 | |
| 956A7651G02 | KIT, SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLYSLIDE HAMMER AND ADAPTER TOOL (LEAP) | 4 | |
| 956A8650 | ASSEMBLY - DISASSEMBLY - SLIDING TUBE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8650G01 | ASSEMBLY- DISASSEMBLY- SLIDING TUBE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8685G03 | TOOL - SLIDING TUBE, ASSEMBLY/DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A25207503000 | INSERTION TOOL - SEAL / PULLEY ASSEMBLY | 28 | |
| 98A29103000000 | ASSEMBLY TOOL-HYDRAULIC SEALS | 12 | |
| 98A29103900000 | ASSEMBLY TOOL-HYDRAULIC SEALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27303008000 | DRILLING TOOL-SIDE STICK ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D34103001000 | TOOL-ASSEMBLY | 6 | |
| 98V27208779000 | EHA electro-hydraulic actuator disassembly tool | 4 | |
| 99-852 | ASP FASTENER INSTALLATION TOOLING - NOSE ASSEMBLY | 1 | |
| 9C3133G01 | REMOVAL TOOL - CLAMP ASSEMBLY, HORIZONTAL DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C3133G02 | Removal Tool - Clamp Assembly, Horizontal Drive Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52016-1 | WEDGE TOOL (ASSEMBLY A52016-2 IS INCLUDED IN KIT A52016-1) | 8 | |
| AB3258-16SE1 | FILTER SHUT-OFF ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB3258-468SE1 | FILTER SHUT-OFF ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ABB999-30SE1 | TOOL - REMOVAL, FUEL FILTER ASSEMBLY | 2 | |
| AC21885000 | TOOL-ASSEMBLY | 2 | |
| AJ65B82215 | TORSION BAR WINDING TOOL - FORCE LIMITER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AJ65B91267 | TOOL - JIG, PT2 PROBE ASSEMBLY, JT9D ENGINE INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT 55122 | NLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 3 | |
| AT 55131 | MLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 1 | |
| AT-56005 | SPRING ASSEMBLY REMOVAL TOOL - NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT31861 | NLG PISTON GUIDE SLEEVE - ASSEMBLY TOOL | 4 | |
| AT55122 | NLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 3 | |
| AT55131 | MLG SHOCK-STRUT BEARING ASSEMBLY TOOL | 1 | |
| AT55131ADLMRO | MLG SHOCK-STRUT BEARING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT55769-102 | TOOL-ASSEMBLY,RETAINER RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT56005-1 | SPRING ASSEMBLY REMOVAL TOOL - NLG | 1 | |
| AT56356 | PINTLE-AFT,SPHERICAL BEARING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATH10505001 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATH10505008 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B42365-1 | B42365-1 OXYGEN CYLINDER DISASSEMBLY TOOLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BCREF169905 | ASSEMBLY TOOL - LINK ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32077-1 | REMOVAL TOOL ASSEMBLY - GLAND NUT, MAIN LANDING GEAR | 5 | |
| C36001-2 | TOOL - GAGE ASSEMBLY | 7 | |
| C36001-82 | SHORT HOE ASSEMBLY (BELONGS TO TOOL C36001-82) | 2 | |
| C75002-26 | HAND TOOL SET- CONTROL STAND, DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002 | HAND TOOL SET-CONTROL STAND,DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002-20 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | 4 | |
| C76002-24 | Hand Tool Set -Control Stand. Disassembly/Assembly | 4 | |
| C76002-25 | Hand Tool Set - Control Stand, Disassembly/Assembly | 6 | |
| C76002-26 | Hand Tool Set -Control Stand. Disassembly/Assembly | 11 | |
| C76002-35 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5616-15 | TOOL-LOWER BEARING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-04F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-06F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-11-08F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | 1 | |
| CBC-11-10F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-12-12F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-12-14F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | 1 | |
| CBC-13-16F | Assembly Model# - Flush Nosecap Assemblies CB, KB2, and CA Tooling | 1 | |
| CBC-22-12F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-22-14F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-23-16F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-23-18F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | 1 | |
| CBC-23-20F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-22F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-24F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-24-26F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-25-28F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-25-30F | Assembly Model# - Flush Nosecap Assemblies CB and CA Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-30F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-32F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-34F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-36F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-38F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-31-40F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-32-42F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-32-44F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-32-46F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-32-48F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-33-50F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-33-52F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-33-54F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-33-56F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-34-58F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-34-60F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-34-62F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-35-64F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-35-66F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-35-68F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-35-70F | Assembly Model# - Flush Nosecap Assemblies CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30597 | TOOL ASSEMBLY- ENGINE MOUNT | 3 | |
| CS-710-138 | INSERT ASSEMBLY TOOL THREAD : 8-32 UNC | 1 | |
| CUTA2500306C | TOOL-ASSEMBLY | 2 | |
| DAPT60-0123-00 | TOOL-BALL ASSEMBLY | 1 | |
| DAPT60-0346-00 | TOOL-BALL ASSEMBLY (14 BALLS) | 9 | |
| DAPT60-0346-00IAS | TOOL-BALL ASSEMBLY | 1 | |
| DAPT60-0347-00 | TOOL-BALL ASSEMBLY | 7 | |
| DAPT60-0347-00IAS | TOOL-BALL ASSEMBLY | 1 | |
| DAPT60−0346−00 | TOOL-BALL ASSEMBLY | 9 | |
| DAPT60−0347−00 | TOOL-BALL ASSEMBLY | 7 | |
| DRK520B | Removal Tool Handle Assembly - M81969/30-20 REV B | 1 | |
| DRT67470 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT68323 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT68329 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT68360 | ASSEMBLY-EXTRACTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F1404372 | TOOL-SWITCH ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F26529000-1 | ASSEMBLY-TOOL | 6 | |
| F26691000 | PISTON BACK-UP RING ASSEMBLY TOOL | 3 | |
| F26691000 AMDT A | LINER BACK-UP RING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F26691000-1 | PISTON BACK-UP RING ASSEMBLY TOOL | 6 | |
| F26692000 | PISTON BACK-UP RING ASSEMBLY TOOL | 6 | |
| F27274000 | WHEEL & TIRE ASSEMBLY TOOL - FERRAMENTA PARA CONJUNTO DE RODA E PNEU | 2 | |
| F28080000 | INSTALLATION TOOL FOR THE INNER HALF WHEEL ASSEMBLY (2-010) AND OUTER WHEEL ASSEMBLY (3-010) | 1 | |
| F5740 | TOOL-GLAND ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70033 | Remover-Assembly Interior Trim Tool | 3 | |
| F72813 | TOOL ASSEMBLY -0 BEARING STAKING TO STAKE BAC- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80047-1 | TOOL ASSEMBLY - REMOVAL, HORIZONTAL STABILIZER HINGE PIN | 10 | |
| F80049-12 | LOCK ASSEMBLY - FLIGHT CONTROLS (HYDRAULIC MODULE ELECTRICAL CONTROL BLOCKING TOOL) (THE BOEING COMPANY) | 9 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S | 5 | |
| F80134-1 | RIGGING TOOL ASSEMBLY - DOOR LATCH ROLLERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-1 -2 -3 | Rigging Tool Assembly -Door Latch Rollers | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-2 | Rigging Tool Assembly - Door Latch Rollers | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-3 | Rigging Tool Assembly - Door Latch Rollers | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80216-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | 3 | |
| F80216-2 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY TRANSMITTER, FLAP POSITION | 1 | |
| FLU179 | TOOL-FLAP UNIVERSAL JOINT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52006-1 | TOOL - AIRSTAIR BRAKE ASSEMBLY | 1 | |
| G601R276202-27 | KIT-ASSEMBLY PCU SAFETY TOOLS | 8 | |
| GS47240 | TOOL-ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE2900987 | SHUT-OFF ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GU28883/1 | TOOL ASSEMBLY- ENGINE MOUNT | 1 | |
| H8603 | Assembly - Hand Tool | 1 | |
| H8603-10 | ASSEMBLY - HAND TOOL | 4 | |
| HU41323 | TOOL-ASSEMBLY CENTRAL OIL TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU41324 | TOOL-ASSEMBLY CENTRAL OIL TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU81330 | ASSEMBLY TOOL - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE3J12712 | Peening，tool-nut flare，fan disk assembly | 1 | |
| J22001-1 | Tool Set - Autothrottle Servo Assembly | 10 | |
| J22001-8 | Tool Set - Autothrottle Servo Assembly | 6 | |
| J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 2 | |
| KBC-040-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-041-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-042-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-043-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-044-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-060-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-061-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-062-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 2 | |
| KBC-063-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-080-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-081-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-082-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-083-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-100-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-101-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-102-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-103-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-120-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-121-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | 1 | |
| KBC-122-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-123-1A | Assembly Model# - Countersink Nosecap Assembly KB and KB2 Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-140-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-141-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-142-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-143-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-160-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-161-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-162-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-163-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-180-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-181-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-182-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-183-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | 2 | |
| KBC-200-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | 2 | |
| KBC-201-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-202-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KBC-203-2A | Assembly Model# - MB CsCx Nosecap Assemblies for CB Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R30-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R32-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R40-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R42-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R50-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R52-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R60-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRC-R62-1A | Assembly Model# - LB CsCx Nosecap Assemblies for CR Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M322 | Crimp Tool for Therm-X Terminal Assembly Pin & Socket Contacts | 1 | |
| M46196-100 | TOOL-ASSEMBLY | 8 | |
| MG174-04 | BRAKE DISS-ASSEMBLY TOOL - AIRBUS | 35 | |
| MHC75B | HAND TOOL BASIC ASSEMBLY - 08 | 2 | |
| MHC75P-8AA | COMPLETE HAND TOOL ASSEMBLY PH-08 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65-56638-1 | Miscellaneous Tool -Support Assembly. Transmitter. Flap Position | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B00772 | MISCELLANEOUS TOOL - FUEL SAMPLING RECEPTACLE ASSEMBLY | 7 | |
| MIT65B01970 | RESTRAINING TOOL - AFT FLAP ASSEMBLY, OUTBOARD TRAILING EDGE FLAPS | 2 | |
| MIT65B04008 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 8 | |
| MIT65B09877-1 | ASSEMBLY TOOL - SPRING CARTRIDGE, BULK CARGO DOOR | 2 | |
| MIT65B81119 | MISCELLANEOUS TOOL - POWER PACK ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| MIT65B81120 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B81121 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT65B81133 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT65B81175 | MISCELLANEOUS TOOL - CLUTCH ASSEMBLY, AUTOTHROTTLE ENGINE CONTROL | 3 | |
| MR0AJ608C | ASSEMBLY TOOL - LINK ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MRO608C3101 | SPL-15029 - ASSEMBLY TOOL - BOLT ALIGNMENT CAP, AUTO RESTOW | 1 | |
| MRO608C3103 | SPL-15028 - ASSEMBLY TOOL - SPRING CLAMP, AUTO RESTOW | 1 | |
| MROAJ608C4100-009 | ASSEMBLY TOOL - LINK ARM, BLOCKER DOOR | 1 | |
| MT133-1 | TOOL ASSEMBLY - PARALLEL VALVE (OR LYCOMING ST-71) | 1 | |
| MT133-5 | TOOL ASSEMBLY - ANGLE VALVE (OR LYCOMING ST-310) | 2 | |
| MT147-1 | AIR BLEED TOOL ASSEMBLY - MAIN ROTOR SPINDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU145055 | SEAL-ASSEMBLY TOOL | 1 | |
| OU145419 | ASSEMBLY-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU145504 | SEAL-ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU145505 | SEAL-ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PPFC-1H | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL. | 3 | |
| PWC54028 | A PULLER/PUSHER - ASSEMBLY TOOL | 2 | |
| PWC54028-A | A PULLER/PUSHER - ASSEMBLY TOOL | 1 | |
| RBE332A94-2790-00 | TOOLING ASSEMBLY,MECH ASSY VAR ,N°1 (ICO 13-30-30-03) BONDING | 1 | |
| RBE703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N°1 (ICO 13-10-00-01) HOISTING SLING | 1 | |
| RBT400264 | Tool Assembly (412-201-701-101) | 1 | |
| RRT048964 | ASSEMBLY TOOL (FOR SB 72-G262 STANDARD QUILL SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT050449 | ASSEMBLY TOOL - IPNGV BUILD STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT053073 | LIFT TOOL - LIFT/IMMOBILISE NGV ASSEMBLY AND OUTER CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT103901 | OVER FILL TOOL - OVERSPILL HOSE AND COUPLING ASSEMBLY | 1 | |
| RRT104638 | ASSEMBLY TOOL - INSTALLATION / REMOVAL OF LOWER SPLITTER FAIRING. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE3415 | Hoist Assembly with Hoist- WE CANT SUPPLY 98F7810 tool that is required to complete this tool | 5 | |
| SCTN20-3 | 3" Nose Assembly for .022" Safe-T-Cable® Application Tool | 1 | |
| SCTN20-7 | 7" Nose Assembly for .022 Safe-T-Cable Application Tool | 1 | |
| SCTN32-3 | 3" Nose Assembly for .032" Safe-T-Cable® Application Tool | 1 | |
| SCTN32-5 | 5" Nose Assembly for .032 Safe-T-Cable Application Tool | 1 | |
| SCTN32-7 | 7" Nose Assembly for .032 Safe-T-Cable Application Tool | 3 | |
| SCTN32-9 | 9" Nose Assembly for .032 Safe-T-Cable Application Tool | 1 | |
| SCTN40-3 | 3" Nose Assembly for .040" Safe-T-Cable® Application Tool | 1 | |
| SCTN40-7 | 7" Nose Assembly for .040 Safe-T-Cable Application Tool | 1 | |
| SCTPRM-TW-SA | Replacement Tension Wheel Sub-Assembly for the SCTPRM Pneumatic Tools | 1 | |
| SE72-6001 | Adjusting Tool Assembly -Relief Valve. Oil Pressure | 5 | |
| SK238-42 | TOOL O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK238-43 | TOOL, O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK238-44 | TOOL, O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK238-45 | TOOL, O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK238-46 | TOOL, O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SK238-47 | TOOL, O-RING ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-2262 | SET - TOOL, JACKSCREW, ENGINE DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1066-24 | STANDARD TOOL - ASSEMBLY AID, GAP COVER SEAL 737 HORIZ STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2613A | STANDARD TOOL-ASSEMBLY TOOLS,737 SLAT DOWNSTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST8709H-1 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 7 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | Standard Tool -Go/No-Go Gauge. For Assembly Of Wiggins Bacc42R Coupling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST8709H-2 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-3 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-4 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 7 | |
| ST8709H-5 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 5 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-7 | STANDARD TOOL - GO/NO-GO GAUGE, FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 5 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COWL FAN | 4 | |
| T-474489-1-6 | CUTTER, DISC ASSEMBLY WELD- MACHINING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-474489-1-7 | HOLDER, DISC ASSEMBLY WELD- MACHINING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-60328 | Installation Tool,Rotor-Bearing Holder Assembly | 1 | |
| T-71039 | Sizing Tool - Plus seals, manifold assembly | 1 | |
| T-71040 | ASSEMBLY TOOL - RETAINER, CONNECTOR 240, IPL FIGU | 1 | |
| T-71040A | ASSEMBLY TOOL - RETAINER, CONNECTOR 510, IPL FIGU | 1 | |
| T-71605 | Assembly Tool - End Cap | 1 | |
| T0100738 | TOOLS-MD11 LANDING GEAR DISASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T060040 | ASSEMBLY TOOL - O-RING | 5 | |
| T103206-101 | RIGGING TOOL ASSEMBLY - TAIL ROTOR CONTROL | 1 | |
| T103347-101 | TOOL ASSEMBLY / RB T103347-101 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T642G4001101 | TOOLING, ASSEMBLY MECH ASSY MAINT (ICO 13-30-10-01) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM0620G002 | ASSEMBLY - REMOVING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM5677G001 | ASSEMBLY TOOL - COMPOSTO | 1 | |
| TO6949-101 | TOOL-PACKBOARD RELEASE MECHANISM ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| U21908 | TOOL-ASSEMBLY DISASSEMBLY | 2 | |
| VDA1-19 | ASSEMBLY TOOL FOR SEALS AND O-RINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VF1620AA0T501 | TOOL-DISASSEMBLY ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| W1 | TOOL-TURRET HEAD ASSEMBLY | 2 | |
| WCI-1700N-06F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | 1 | |
| WCI-1700N-08F | ASSEMBLY MODEL# - FLUSH NOSECAP ASSEMBLIES CB, KB2, AND CA TOOLING | 2 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
