| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HA-T101880 | SLEEVE TOOL | 1 | |
| NSK-1626 | SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101880 | SLEEVE TOOL | 1 | |
| RB T103303-101 | SLEEVE TOOL | 2 | |
| RB T103311-101 | SLEEVE TOOL | 2 | |
| RB T103342-101 | Sleeve Tool | 2 | |
| RB T103343-101 | Sleeve Tool | 2 | |
| T101880 | SLEEVE TOOL | 3 | |
| T103303-101 | SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103311-101 | Sleeve Tool | 1 | |
| T103342-101 | SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103343-101 | SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98A54003084000 | INSTOOL INSERTING TOOL - SLEEVE, RIB12, (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0061R12510 | Sleeve Socket Tool | 1 | |
| 0061R12510PM | SLEEVE SOCKET TOOL | 1 | |
| 106524 | ALCOA FASTENING SYSTEM - HAND TOOL SLEEVE - DIA 06 | 2 | |
| 106525 | ASP FASTENER INSTALLATION TOOLING - SLEEVE SOCKET | 3 | |
| 107735 | ALCOA FASTENING SYSTEM - HAND TOOL SLEEVE - DIA 10 | 2 | |
| 109-3130-15-7 | AGUSTA T/R - TOOL, TR, STATIC BALANCE - SPACER, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3400-38-3 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - BUSHING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1103 | BULLET TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1104 | Piston Support Tool for Installation of Pistons into Adjuster Sleeves | 1 | |
| 114-1105 | Guide Tool for Installation of Pistons into Adjuster Sleeves | 1 | |
| 114-1150 | GUIDE´´ TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVE EXCLUDER RINGS | 1 | |
| 114-1285 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVESLOAD | 1 | |
| 114-1359 | GUIDE TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1404 | PISTON SLEEVE BACKUP RETAINER AND O-RING ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1423-AZL | SPLIT RING TOOL FOR SIZING BACKUP RINGS ON ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1539 | “GUIDE” TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-1585 | ADJUSTER SLEEVE O-RING/ BACKUP RING INSTALLATION TOOL | 1 | |
| 114-1586 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1587 | TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1607 | O-RING AND BACKUP RING INSTALLATION TOOL FOR ADJUSTER SLEEVE | 1 | |
| 114-1609 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-323 | Tool that sizes backup rings on a piston sleeve | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-370 | “BULLET” TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 3 | |
| 114-371 | “SUPPORT” TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-434 | ADJUSTER SLEEVE O-RING INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-436 | SLEEVE GUIDE TOOL FOR INSTALLATION OF PISTONS INTO THE ADJUSTER SLEEVE | 1 | |
| 114-437 | TOOL THAT SIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-438 | ADJUSTER SLEEVE O-RING INSTALLATION TOOL | 1 | |
| 114-451 | "GUIDE" TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-780-1 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-780-2 | PUSHER TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-780-3 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON ADJUSTER SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 114-780-4 | TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 12-02560 | COMPRESSING TOOL,SPLICING SLEEVE | 1 | |
| 12345-032-001 | SLEEVED BEARING INST'L / REMOVAL STAKING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12345-032-019 | SLEEVED BEARING INST'L / REMOVAL STAKING TOOL | 1 | |
| 1544440AT6-101 | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1610000F21 | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1900610 | BYPASS VALVE SLEEVE RESIZING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1900681 | ACTUATOR SLEEVE RE-SIZING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1900683 | BLOCKING VALVE SLEEVE RESIZING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1900711 | BODY SLEEVE SENSOR TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1AE1N20011 | HANDLING TOOL, TRANSLATING SLEEVE L/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1AE1N20011 L/H REV NC | HANDLING TOOL, TRANSLATING SLEEVE L/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1AE1N20012 | HANDLING TOOL, TRANSLATING SLEEVE R/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1AE1N20012 R/H REV NC | HANDLING TOOL, TRANSLATING SLEEVE R/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2024009-1 | BAKE SLEEVE TOOL | 1 | |
| 2311M84-903 | Sleeve Removal Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2311M84-907 | Shaft Sleeve Staking Tool (Bottom) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2311M84-908 | Shaft Sleeve Staking Tool (Top) (2 IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2566533 | Metering Valve sleeve Packing Compression Tool Set | 1 | |
| 2566823 | Speed Servo Sleeve Packing Compression Tool Set | 1 | |
| 269A9243 | Sleeve - 269A5108 Retainer Removal Tool - Arbor Press | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2AA617-6329-001 | OUTER BEARING SLEEVE PRESS TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14745 | TOOL, INSTALL - WEAR SLEEVE, HORIZ. DRIVESHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14745 REV B | TOOL, INSTALL - WEAR SLEEVE, HORIZ. DRIVESHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14745G01 | SET OF 3 TOOL INSTALL-WEAR SLEEVE,HORIZDRIVE SHAFT | 1 | |
| 2C14745G01TK | TOOL, INSTALLATION-WEAR SLEEVE, HORIZONTAL DRIVE SHAFT HOUSING | 1 | |
| 2C6563 | TOOL, INSTALL/REMOVE-HPT DAMPER SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6563G01 | TOOL, INSTALL/ REMOVE - HIGH PRESSURE TURBINE DAMPER SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3014000F116 | SLEEVE SET ASSY, TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 340400 | TOOL-SCREW, SERVO SLEEVE R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350A93-3300-20 | TAIL ROTOR HUB REMOVAL SLEEVE TOOL | 2 | |
| 350A93-3320-00 | FIT BEARING TOOL/ STATIONARY SLEEVE | 1 | |
| 351-6100_27GSE | TRANSLATING SLEEVE SLING (OEM TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3727407-1 | PIN SLEEVE INSTALLATION TOOL | 1 | |
| 394112AT1-101 | ASSEMBLY TOOL ( SLEEVE PULLER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 396000AT3 | EXTRACTION TOOL, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412-240-030-101 | TOOL ASSEMBLY INSTALL SLEEVE, TAIL ROTOR GEAR BOX | 1 | |
| 416-005 | NAMEPLATE SLEEVE EXPANSION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 423085M0NT6-1 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 423085M0NT6-2 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 427-240-155-101 | TOOL SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5003 | TOOL TO SLIDE SLEEVES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5206 | TOOL, SLEEVES SHAPING | 1 | |
| 45216 | TE Connectivity 45216 Compressing Tool, Splice Sleeve - 18-16 AWG | 7 | |
| 460005833 | MLG GROUND LOCK SLEEVE TOOL | 19 | |
| 460005835 | SLEEVE GROUND LOCK TOOL – MLG DOOR | 44 | |
| 490700GSE2-1 | HSTA OUTER BEARING SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 490700GSE5-1 | HSTA NUT INNER BEARING SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5001241-T | SLEEVE CYL ASSY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5401-06 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 3 | |
| 5401-2 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 4 | |
| 5402-10 | WIRE SCREW SLEEVE INSTALLATION TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5402-12 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 2 | |
| 5402-3 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 6 | |
| 5402-4 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 6 | |
| 5402-5 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 3 | |
| 5402-6 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 2 | |
| 5402-7 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 2 | |
| 5402-8 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 4 | |
| 5402-9 | WIRE SCREW SLEEVE INSTALLATION TOOLS | 1 | |
| 615000AT1 | Assembly Tool, Shrink Sleeve | 1 | |
| 615022AT1 | Assembly Tool, Sizing Sleeve | 1 | |
| 64CGMP | COMPRESSING TOOL,SPLICING SLEEVE | 3 | |
| 69-38919-1BST | BEARING SLEEVE TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-10048-3 | SLEEVE PULLER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70001-T8 | SLEEVE REMOVAL TOOL | 1 | |
| 70001T16 | SLEEVE REMOVAL TOOL | 1 | |
| 716181 | TOOL FOR EQUIPED SLEEVE | 1 | |
| 74193AT7 | SLEEVE O-RING INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 74194AT5-23 | FREEZE SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 74194AT5-9 | SLEEVE INSTALLATION BULLET TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 74195AT1-23 | FREEZE SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 76036T3/76036T12 | Sleeve And Receiver Alignment Tool | 1 | |
| 76908 | GUIDE CONE SLEEVE TOOL | 11 | |
| 856A 2353G01 | PULLER TOOL SET NO. 5 BEARING SLEEVE | 2 | |
| 856A2353G01 | PULLER TOOL SET .NO.5 BEARING SLEEVE | 2 | |
| 856A2825 | LEAK TEST- TOOL, SLEEVE (HANDCRANKING LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3319 | TOOL SET PUSH SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3319G01 | Sleeve Pusher Tool Set | 2 | |
| 856A3597 | TOOL R/I OIL SLEEVE HORZ DR SH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3597G01 | TOOL R/I OIL SLEEVE HORZ DR SH | 1 | |
| 856A5685G02 | TOOL SET LEAK TEST SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A6646G01 | LEAK TEST - TOOL, SLEEVE DIA M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A6647G01 | LEAK TEST - TOOL, SLEEVE DIA Z | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8817802000 | SLEEVE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27504016000 | TOOL ADJUSTING NUT SLEEVE | 7 | |
| 98A54003022000 | TOOL: EXTRACTOR-SLEEVE 5100 | 9 | |
| 98A54003084000 | INSERTING TOOL-SLEEVE,RIB12,RIB18 | 8 | |
| 98A54403006000 | TOOL SLEEVE RIB | 5 | |
| 98D54403001000 | DUMMY SLEEVE TOOL | 16 | |
| 98D57004028000 | PYLON SLEEVE EXTRACTOR KIT TOOL | 16 | |
| 98D57004029000 | PYLON SLEEVE SPANNER TOOL | 21 | |
| 98V32404002000 | AXLE SLEEVE REM TOOL | 2 | |
| A292511 | WATER GUIDE SLEEVE DISASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A300 NLG R/I | HOIST SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32097-2 | B767 NLG SLEEVE PROTECTOR TOOL | 7 | |
| AID-00915 | DRIVER FAN MATING SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AID-01403 | Primary Relief Valve Sleeve Removal/Install Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APV7870-01-0 | RIGGING TOOL - TRANSLATING SLEEVE, T/R | 1 | |
| AT31861 | NLG PISTON GUIDE SLEEVE - ASSEMBLY TOOL | 4 | |
| AT56659 | ASSY TOOL SLEEVE | 3 | |
| ATI520H-25 | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AZL02339-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE SPOILERS - A320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AZL04543-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE ELEVATORS - A320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B28004-1 | B767 COLLIMINATOR SLEEVE TOOL | 7 | |
| B32059-1 | AXLE SLEEVE KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32060-1 | DRILL JIG AXLE SLEEVE TOOL | 3 | |
| C32016-10 | SLEEVE COMPONENT TOOL | 4 | |
| C38003-1 | TOOL-SLEEVE INSTALLATION | 9 | |
| C78004-1 | TOOL-T/R SLEEVE LOCK PIN | 28 | |
| C78009-1 | REMOVE / INSTALL TOOL - PRIMARY EXHAUST SLEEVE PLU | 2 | |
| C78009-19 | REMOVE / INSTALL TOOL - PRIMARY EXHAUST SLEEVE PLU | 5 | |
| C78009-72 | TOOL - REMOVE/INSTALL , PRIMARY EXHAUST SLEEVE | 6 | |
| C78017-1 | Alignment Tool - Lower Auxiliary Slider, Thrust Reverse rTranslating Sleeve | 5 | |
| C78022-35 | TOOL NOMEN: SLING EQUIPMENT-THRUST REVERSER SLEEVE | 7 | |
| CB3SR-4-4-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBC-10-06F | JAW, SLEEVE RETENTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBG-12-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBKD-10-0-N-2460 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBKD-14-0-N-1-.3715-CBD | "SPLIT SLEEVE COLD EXPANSION CUTTING TOOL " | 1 | |
| CBR-10-0-N-1-.3090 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-10-0-N-1-.3100 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBR-10-0-N-1-3100 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBR-10-3-N-1-.3696 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-10-3-N-1-.3700 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-10-N-1-0.320 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-12-0-N-1-0.3790 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-12-0-N-1-0.3850 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-12-0-N-1-3725 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBR-12-1-N-1-0.3850 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-12-3-N-1-.4320 | Split Sleeve Cold Expansion Cutting Tool | 2 | |
| CBR-4-3-N-RA-1760 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBR-4-4-N-1-.1860 | Split Sleeve Cold Expansion Cutting Tool | 2 | |
| CBR-6-1-N-1-.2132 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-6-3-N-1-.2452 | Split sleeve cold expansion cutting tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-6-3-N-1-0.2495 | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBR-8-3-N-1-.3080 | Split Sleeve Cold Expansion Cutting Tool | 1 | |
| CBS-10-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 3 | |
| CBS-10-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 3 | |
| CBS-10-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-10-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-12-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-12-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-12-2-N-16F | SLEEVES FOR FTI TOOLKITS | 6 | |
| CBS-12-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-12-3-N-16F | TOOL - EXPANSIVE SLEEVE FOR HOLES AND | 5 | |
| CBS-14-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-14-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-14-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-14-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-16-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-16-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-16-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-16-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-18-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-18-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-18-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-18-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-20-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-20-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 2 | |
| CBS-20-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-20-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBS-4-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-4-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-4-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-4-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-4-4-N-24S | STRAIGHT SLEEVE - ALTERNATE TOOLING FOR COUNTERSUN | 4 | |
| CBS-6-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-6-1-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 5 | |
| CBS-6-2-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-6-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-8-0-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBS-8-1-N-16F | SLEEVES FOR FTI TOOLKIT | 10 | |
| CBS-8-1-N-16S | SLEEVE FOR FTI TOOLKITS | 2 | |
| CBS-8-1-N-23F | SLEEVE FOR FTI TOOLKITS | 5 | |
| CBS-8-1-N-24S | SLEEVE FOR FTI TOOLKITS | 2 | |
| CBS-8-2-N-24S | STRAIGHT SLEEVE - ALTERNATE TOOLING FOR COUNTERSUN | 2 | |
| CBS-8-3-N-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | 1 | |
| CBSD 14-0-N-1 | Sleeve cutting tool | 1 | |
| CBSD-12-1-N-1 | Split Sleeve Cold Expansion Cutting Tool | 1 | |
| CBSD-12-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSD-16-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSD-16-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-16-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-2-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-2-N-RA | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSD-4-4-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSD-6-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSD-6-1-N | Split Sleeve Cold Expansion Cutting Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CBSD-6-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 4 | |
| CBSD-6-2-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBSD-6-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 4 | |
| CBSD-8-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSD-8-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBSR-12-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBSR-12-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSR-12-3-N-1 | Split Sleeve Cold Expansion Cutting Tool | 3 | |
| CBSR-16-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSR-16-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-16-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-2-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-2-N-RA | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-3-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| CBSR-4-4-N-1 | SLIT SLEEVE CUTTING TOOL | 3 | |
| CBSR-6-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBSR-6-1-N-1 | Split Sleeve Cold Expansion Cutting Tool | 5 | |
| CBSR-6-2-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBSR-6-3-N-1 | Split Sleeve Cold Expansion Cutting Tool | 4 | |
| CBSR-8-0-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| CBSR-8-1-N-1 | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 3 | |
| CBTS-7675400841-OS- | SLEEVE COLD EXPANSION TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R30-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R32-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R40-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R42-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R50-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R52-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R60-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CRS-R62-24S | Straight Sleeve - Alternate Tooling for Countersunk Holes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAH602734 | SLEEVE GROUND LOCK TOOL – MLG DOOR | 8 | |
| DAPT60-0223-00 | OUTER SLEEVE CLAMP ( PROPELLER BLADE TOOL) | 7 | |
| DRT68923-T | GROUND LOCK SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E54080 | Sleeve Pull Tool | 1 | |
| ED-7-003 | SOLDERSLEEVES, 220 V, HEATING TOOL, IR-1759 MINIRAY INFRARED HEATING TOOL (RAYCHEM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EXT-SLEEVE | 12" EXTENTION SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F26516000 | INSTALLATION TOOL (FOR THE BACK-UP RING OF THE SLEEVE) | 7 | |
| F26817000 | TOOL USED TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTON SLEEVES. | 2 | |
| F27179000 | TOOL TO INSTALL THE BACK-UP RING (1-420) OF THE PISTON SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F27268000 | BACKUP RINGS INSTALLATION TOOL ON PISTON SLEEVES | 2 | |
| F27532000 | TOOL TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTONS SLEEVES | 3 | |
| F27537000 | TOOL FOR THE REMOVAL OF THE BEARING CUPS RINGS ON THE PISTON SLEEVE | 2 | |
| F70292 | ROLLER SWAGING TOOL-SLEEVE,ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70292-1 | ROLLER SWAGING TOOL - SLEEVE, ROD AND HEAD ENDS, MAIN LANDING GEAR ACTUATOR | 2 | |
| FTI-170-57-0073-1 | SPLIT SLEEVE COLD EXPANSION TOOL | 1 | |
| FY5-06512W09-01 | SPIGOT SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS24324-1 | BEARING SLEEVE INSTALLATION AND REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56069 | Axle sleeve button extraction tool | 2 | |
| GSE57676 | REMOVAL TOOL BUTTON AXLE SLEEVE | 1 | |
| H1X3005-0G | SAFETY DOOR SLEEVE PIVOT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HIX3005 | SAFETY DOOR SLEEVE PIVOT TOOL | 29 | |
| HU37660-1 | TOOL: SLEEVE SETTING LP | 1 | |
| IAE1N0011 | LEFT TRANSLATING SLEEVE HANDLING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1N0012 | RIGHT TRANSLATING SLEEVE HANDLING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1N20011 | TOOL HANDLING TRANSLATING SLEEVE LH | 12 | |
| IAE1N20012 | HANDLING TOOL, TRANSLATING SLEEVE R/H | 12 | |
| IR-1759-MK2-A | SOLDERSLEEVES, 220 V, HEATING TOOL (RAYCHEM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27058-1 | Sleeve - Tool Set, Seal Installation (-17 Is Part Of -1 Set) | 6 | |
| J27058-17 | SLEEVE, J27058-17 (INCLUDED IN J27058 TOOL SET) | 4 | |
| J32032-3 | WRENCH TOOL/SLEEVE | 4 | |
| J78007-85 | TOOL, EXHAUST SLEEVE/PLUG | 8 | |
| JA-161A1127-1 | BRAKE SLEEVE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JA-161A1131-1 | WHEEL SLEEVE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT30335 | TK BRG & SLEEVE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT716181 | SLEEVE-TOOL FOR EQUIPPED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU74352 | PISTON RETAINING SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MH802 | Circular Indent Crimp Tool for Shield Crimp Sleeve Size 16 | 1 | |
| MH804 | Circular Indent Crimp Tool for Shield Crimp Sleeve Size 12 | 1 | |
| NSK-1626 | SLEEVE TOOL (SPL-9093 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PMAT-0035 | Bake Sleeve Tool | 1 | |
| PMAT0035 | BAKE SLEEVE TOOL | 1 | |
| PWC30336 | PROTECTOR SLEEVE (HOT SECTION INSPECTION TOOL | 8 | |
| PWC51166 | Sleeve Carrier Tools Set (8 Tools) | 2 | |
| R46457 | TOOL USED TO INSTALL THE PISTON INTO THE PISTON SLEEVE. | 2 | |
| R47168 | TOOL TO INSTALL THE PISTON INTO THE PISTON SLEEVE | 1 | |
| RB T101553 | Transmission Oil Cooler Sleeve Install Tool Set | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101880 | Tool Sleeve | 1 | |
| RB T103311-101 | WEAR SLEEVE INSTALLATION TOOL | 2 | |
| RB T103400-101 | Comb Gear Box Piston Ring Install Tool Sleeve | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBE672658 | Main Rotor Sleeve Bolt Holding Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBT18532-A | Main Rotor Yoke Wear Sleeve Installation Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBT18532-L | Main Rotor Yoke Wear Sleeve Installation Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBT400285 | TOOL ASSEMBLY INSTALL SLEEVE, TAIL ROTOR GEAR BOX | 1 | |
| ROC472117 | SPARK PLUG SLEEVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST1007SLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST1008SLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2012SLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2448DRWSLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2456DRWSLV | TOOL, STAKING, REPLACEMENT SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2597DRWSLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2611DRWSFT | TOOL, STAKING DRAW SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2611DRWSLV | TOOL, STAKING, DRAW SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2756ADJSLV | TOOL, STAKING, ADJUSTMENT SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST2756DRWSLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST3007DRWSLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST3009DRWSLV | TOOL, STAKING, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RST4067SLV | TOOL,ACCY, SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST1P376-45-0027 | SEAL AND SLEEVE ASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2575C | STANDARD TOOL - FENWAL CONNECTORS, SLEEVE AND PIN PRESS TOOL, BAC5162-64 | 2 | |
| ST2575C-1 | Sleeve & pin press tool BAC5162-64 | 3 | |
| ST878D | Sleeve Set Tool -For Presetting Bacs13Ap Flareless Tube Fittings | 9 | |
| ST878D-4-20 | SLEEVE SET TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST878D5-5-035 | Sleeveset Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST921MA | TAPERED SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST921MA-4-8-22-P | Standard tool-tapered sleeve removal tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST921MA-6-8-22-P | Standard tool-tapered sleeve removal tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST921MA-6-9-22-ALL | Standard tool-tapered sleeve removal tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST921MB | STANDARD TOOL - STRAIGHT SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST928 | STANDARD TOOL - ROLLER STAKING TOOL, ALUMINUM SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST928-1625-625 | ROLLER STAKING TOOL, ALUMINIUM SLEEVE | 1 | |
| ST928-1687-500 | SLEEVE SWAGE TOOL | 1 | |
| ST928-A | STANDARD TOOL - ROLLER SWAGING, ALUMINUM SLEEVE 69-38919 | 1 | |
| ST928A | ROLLER SWAGE ALUMINUM SLEEVE TOOL | 1 | |
| ST928B | ROLLER SWAGING TOOL - BEARING SLEEVE | 1 | |
| ST928C | Roller Swaging Tool -Bearing Sleeve | 3 | |
| ST928C-107 | ROLLER SWAGING TOOL - BEARING SLEEVE | 1 | |
| ST928C-4 | SLEEVE, ROLLER SWAGING TOOL-BEARING | 7 | |
| ST928C-91 | SLEEVE SWAGE TOOL | 2 | |
| ST928D | SLEEVE SWAGE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST928E | Roller Swaging Tool - Aluminum Sleeve, 69-38919-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST928F | ROLLER STAKING TOOL - ALUMINUM SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST929-1 | ROLLER SWAGE STEEL SLEEVE TOOL | 2 | |
| ST929-1A | Roller Swaging Tool - Bearing, sleeve | 1 | |
| ST929-2A | BEARING SLEEVE STAKING TOOL, 3-POINT | 1 | |
| ST929-2C | STAKING TOOL - BEARING SLEEVE, SIX POINT | 1 | |
| ST929-2C-375-875-562 | STAKING TOOL-BEARING SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST929-3A | Staking tool-bearing sleeve，three point | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST929H | STANDARD TOOL-BEARING REMOVAL/INSTALL/SWAGE.SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST95502 | Relief Valve Sleeve Removal/Installation Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2 | STANDARD TOOL - REMOVAL TOOL，SCRIVET FASTENERS AND BACB31 SLEEVE BOLTS | 8 | |
| ST991A-2-250 | STANDARD TOOL- REMOVAL TOOL，SCRIVET FASTEFNRS AND BACB31 SLEEVE BOLTS | 8 | |
| ST991A-2-312 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | 2 | |
| ST991A-2-375 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-438 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-500 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-563 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-625 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-750 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A-2-875 | Standard tool-removal tool scrivet fasteners and bacb31 sleeve bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-10048-3 | Sleeve Puller Tool | 1 | |
| T-1FA0113490 | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-304079 | Tool, Sleeve Removal | 1 | |
| T-304127 | Tool - Sleeve Removal | 1 | |
| T-3824078 | INST TOOL WEAR SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-436407 | Sleeve Removal Tool | 2 | |
| T-436407 PM | TOOL SLEEVE REMOVAL | 1 | |
| T-46170A | Pull Tool, Sleeve | 1 | |
| T-61488 | SLEEVE END EXTRACTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-68189 | EXTRACTION TOOL, SLEEVE END 39-35312 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-7-5012-06/ AF | SLEEVE REMOVAL TOOL (PHOENIX CONTROLS AC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-7-5212-06/AF | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101880 | SLEEVE REMOVAL TOOL | 3 | |
| T103303-101 | WEAR SLEEVE INSTALLATION TOOL (SLEEVE TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103311-101 | WEAR SLEEVE TOOL | 1 | |
| T103342-101 | SHAFT DUPLEX BEARING SLEEVE (SLEEVE TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T22280710-SIT-1 | SLEEVE INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T22280710-SRT-1 | SLEEVE REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T436407 | TOOL SLEEVE REMOVAL | 2 | |
| T46170A | PULL TOOL SLEEVE | 1 | |
| TASA-V25T2150 | TRANSLATING SLEEVE HANDLING TOOL TS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE-151252 | Form Tool, Sleeve Retainer Plus Seal/Packing | 1 | |
| TS5000SRT2 | SLEEVE ROTATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TX30210-3 | PISTON INSTALLATION TOOL; SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TX30230-3 | SLEEVE PISTON INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VM0-158 | ASSEMBLY TOOL FOR SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WCI-FR-4-3-N-1760-RA | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SD-04-0-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| WCI-SD-04-1-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SD-04-2-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SD-04-2-N-RA | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SD-04-3-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| WCI-SR-04-0-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SR-04-1-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SR-04-2-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SR-04-2-N-RA | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SR-04-3-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 1 | |
| WCI-SR-06-1-N | SPLIT SLEEVE COLD EXPANSION CUTTING TOOL | 2 | |
| X416-002 | SLEEVE FITTING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FT-20 | POWER TOOLS SPLIT SLEEVE COLD EXOANSION FT-20 POWER PAK | 5 | |
| 98A27504016000 | AJUSTING TOOL,NUT SLEEVE,FLAP FORWARD AT | 7 | |
| 98A54003084000 | SLEEVE INSERTING TOOL,RIB 12,RIB 18,FOR | 8 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
