Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
CG-173-2, 3, 4 | Set of 3 | 1 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
(CALIB) IFR 4000 | AEROFLEX NAVIGATION COMMUNICATION RAMP TEST SET C/W ELT (121.5/243MHZ BEACON&406MHZ COSPASS/SARSAT BEACON TEST) (CALIBRATION) | 3 | |
02-C1-H | Jobber's Length Drill Sets ( Drill Sizes: #1 To #60 )( Number Of Pieces: 60 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-C13-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/64" (x 64ths) )( Number Of Pieces: 13 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-C15-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 32nds) )( Number Of Pieces: 15 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-C21-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 3/8" (x 64ths) )( Number Of Pieces: 21 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-C252-H | Jobber's Length Drill Sets ( Drill Sizes: 1-13 Mm (x 0.5 Mm) )( Number Of Pieces: 25 )( Type: Production Grade )( Material: High Speed Steel )( Drill Point: 118 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-C29-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 64ths) )( Number Of Pieces: 29 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-CAZ-H | Jobber's Length Drill Sets ( Drill Sizes: A To Z )( Number Of Pieces: 26 )( Type: Heavy Duty )( Material: High Speed Steel )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-CB13-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/64" (x 64ths) )( Number Of Pieces: 13 )( Type: Heavy Duty )( Material: Cobalt )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-CB15-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 32nds) )( Number Of Pieces: 15 )( Type: Heavy Duty )( Material: Cobalt )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-CB21-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 3/8" (x 64ths) )( Number Of Pieces: 21 )( Type: Heavy Duty )( Material: Cobalt )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-CB26-H | JOBBER'S LENGTH DRILL SETS ( DRILL SIZES: A TO Z )( NUMBER OF PIECES: 26 )( TYPE: HEAVY DUTY )( MATERIAL: COBALT )( DRILL POINT: 135 DEG. SPLIT POINT ) | 1 | |
02-CB29-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 64ths) )( Number Of Pieces: 29 )( Type: Heavy Duty )( Material: Cobalt )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-CB60-H | JOBBER'S LENGTH DRILL SETS ( DRILL SIZES: #1 TO #60 )( NUMBER OF PIECES: 60 )( TYPE: HEAVY DUTY )( MATERIAL: COBALT )( DRILL POINT: 135 DEG. SPLIT POINT ) | 1 | |
02-CT15-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 32nds) )( Number Of Pieces: 15 )( Type: Production Grade )( Material: H.S.S. TiN Coated )( Drill Point: 118 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-CT29-H | Jobber's Length Drill Sets ( Drill Sizes: 1/16" To 1/2" (x 64ths) )( Number Of Pieces: 29 )( Type: Heavy Duty )( Material: H.S.S. TiN Coated )( Drill Point: 135 Deg. Split Point ) | 1 | |
02-CT60-H | Jobber's Length Drill Sets ( Drill Sizes: #1 To #60 )( Number Of Pieces: 60 )( Type: Heavy Duty )( Material: H.S.S. TiN Coated )( Drill Point: 135 Deg. Split Point ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-99513 | Toggle Clamps ( Holding Capacity: Varies )( Jaw Gap: 1-1/16" (27 Mm) )( Jaw Reach: 4" )( Overall Length: 11-3/32" (282 Mm) )( Spindle Thread: 5/16"-24, Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-S3 | Malco® Hand Seamers ( Jaw Width: 3-1/4" W X 1-1/4" D )( Overall Length: 8-1/2" (216 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
05066658001 | BIT OFFSET CRUCIFORM 3/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-130-4703 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .401 Shank Double Offset ) | 1 | |
07-130-4705 | AN470 Double Offset Rivet Sets ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .401 Shank Double Offset ) | 1 | |
07-130-4706 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .401 Shank Double Offset ) | 1 | |
07-131-4703 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .401 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-131-4705 | AN470 Double Offset Rivet Sets ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .401 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-131-4706 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .401 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-132-4703 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-132-4705 | AN470 Double Offset Rivet Sets ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-132-4706 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-133-4703 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-133-4705 | AN470 Double Offset Rivet Sets ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-133-4706 | AN470 Double Offset Rivet Sets ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm)) )( Type: .498 Shank Double Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-140 | Offset Flush Mushroom Sets ( Face Diameter: 1" (25 Mm) )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-143 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-144 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-145 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-160 | Offset Flush Mushroom Sets ( Face Diameter: 1" (25 Mm) )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-163 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-164 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-165 | Offset Flush Mushroom Sets ( Face Diameter: 1-1/4" (32 Mm) )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4302 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4303 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4304 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4305 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4306 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4308 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4352 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4353 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4354 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4355 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4356 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4358 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4422 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4423 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4424 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4425 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4426 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4428 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-45010 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 5/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4502 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4503 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 3/32" ) | 1 | |
07-20-4504 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 1/8" ) | 1 | |
07-20-4505 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 5/32" ) | 1 | |
07-20-4506 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 3/16" ) | 1 | |
07-20-4508 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 3-1/2" (89 Mm) )( Rivet Size: 1/4" ) | 1 | |
07-20-4552 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4553 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4554 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4555 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4556 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4562 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4563 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4564 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4565 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4566 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4568 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4702 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4703 | RIVET SETS - OFFSET UNIV.AN470 3-1/2" L-DIM .401 SHK 3/32" | 2 | |
07-20-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4704 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | 1 | |
07-20-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4705 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4706 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | 1 | |
07-20-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4707 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4708 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4709 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-20-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4302 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4303 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4304 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4305 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4306 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4308 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4352 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4353 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4354 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4355 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4356 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4358 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4423 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4425 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4426 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4503 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 3/32" ) | 1 | |
07-21-4505 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 5/32" ) | 1 | |
07-21-4506 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 3/16" ) | 1 | |
07-21-4553 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4555 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4556 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4563 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/31" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4565 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4566 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4703 | RIVET SETS - OFFSET UNIV.AN470 5-1/2" L-DIM .401 SHK 3/32" | 1 | |
07-21-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4705 | RIVET SETS - OFFSET UNIV.AN470 5-1/2" L-DIM .401 SHK 5/32" | 1 | |
07-21-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4706 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Universal AN470 ) | 1 | |
07-21-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4707 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4709 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-21-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4302 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4303 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4304 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4305 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4306 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4308 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4352 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4353 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4354 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4355 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4356 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4358 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4423 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4425 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4426 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4503 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4505 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4506 | AN450 Tubular Rivet Sets .401" Offset Shank ( Overall Length: 5-1/2" (140 Mm) )( Rivet Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4553 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4555 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4556 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4563 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4565 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4566 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4703 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4705 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4706 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4707 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4709 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-22-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4302 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4303 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4304 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4305 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4306 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4308 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4352 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4353 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4354 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4355 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4356 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4358 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4423 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4425 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4426 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4553 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4555 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4556 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4563 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4565 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4566 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4703 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4705 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4706 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4707 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4709 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-23-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4302 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4303 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4304 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4305 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4306 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4308 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4352 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4353 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4354 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4355 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4356 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4358 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4422 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4423 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4424 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4425 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4426 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4428 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4552 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4553 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4554 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4555 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4556 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4562 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4563 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4564 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4565 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4566 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4568 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4702 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4703 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4704 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4705 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4706 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4707 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Univeral AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4708 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4709 | Rivet Sets .401" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-24-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .401" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4302 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4303 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4304 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4305 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4306 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4308 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4352 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4353 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4354 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4355 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4356 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4358 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4422 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4423 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4424 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4425 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4426 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4428 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4552 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4553 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4554 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4555 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4556 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4562 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4563 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4564 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4565 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4566 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4568 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4702 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4703 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4704 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4705 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4706 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4707 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4708 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4709 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-40-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4302 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4303 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4304 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4305 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4306 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4308 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4352 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4353 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4354 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4355 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4356 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4358 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 5-1/2" (140 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4423 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4425 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4426 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4553 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4555 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4556 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4563 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4565 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4566 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4703 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4705 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4706 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4707 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4709 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-41-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4302 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4303 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4304 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4305 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4306 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4308 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4352 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4353 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4354 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4355 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4356 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4358 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 7-1/2" (191 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4423 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4425 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4426 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4553 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4555 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4556 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4563 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4565 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4566 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4703 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4705 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4706 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4707 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4709 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-42-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4302 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4303 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4304 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4305 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4306 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4308 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4352 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4353 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4354 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4355 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4356 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4358 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 10-1/2" (267 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4423 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4425 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4426 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4553 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4555 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4556 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4563 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4565 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4566 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4703 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4705 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4706 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4707 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4709 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-43-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4302 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4303 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4304 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4305 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4306 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4308 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Type: Round AN430 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4352 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4353 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4354 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4355 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4356 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4358 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Type: Button AN435 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4422 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4423 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4424 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4425 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4426 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4428 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Type: Flat AN442 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4552 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4553 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4554 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4555 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4556 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Brazier AN455 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4562 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4563 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4564 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4565 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4566 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4568 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Type: Mod. Brazier AN456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4702 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4703 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4703BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4704 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/8" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4704BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/8" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4705 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 5/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4705BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 5/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4706 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 3/16" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4706BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 3/16" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4707 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 7/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4707BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 7/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4708 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 1/4" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4708BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 1/4" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4709 | Rivet Sets .498" Shank (Offset) ( Cupping Size: 9/32" )( Overall Length: 13-1/2" (343 Mm) )( Type: Universal AN470 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-44-4709BAC | Boeing® BACR15FT Modified Universal Rivet Sets .498" Shank ( Cupping Size: 9/32" )( Overall Length: 13-1/2 (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-520-4302 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-520-4303 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 3/32" ) | 1 | |
07-520-4304 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 1/8" ) | 1 | |
07-520-4305 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 5/32" ) | 1 | |
07-520-4306 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 3/16" ) | 1 | |
07-520-4702 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-520-4703 | .401 SHANK RIVET SETS - OFFSET 1-5/8" L 1/2" DIA 3/32" CUP | 1 | |
07-520-4704 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 1/8" ) | 1 | |
07-520-4705 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 5/32" ) | 1 | |
07-520-4706 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-5/8" (41 Mm) )( Cupping Size: 3/16" ) | 1 | |
07-521-4302 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4303 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4304 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4305 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4306 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4308 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4702 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4703 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4704 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4705 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4706 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-3/4" (45 Mm) )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-521-4708 | .401 SHANK RIVET SETS - OFFSET 1-3/4" L 1/2" DIA 1/4" CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4302 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4303 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4304 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4305 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4306 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4308 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4702 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-522-4703 | .401 SHANK RIVET SETS - OFFSET 1-7/8" L 1/2" DIA 3/32" CUP | 1 | |
07-522-4704 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/8" ) | 1 | |
07-522-4705 | .401 SHANK RIVET SETS - OFFSET 1-7/8" L 1/2" DIA 5/32" CUP | 1 | |
07-522-4706 | .401 SHANK RIVET SETS - OFFSET 1-7/8" L 1/2" DIA 3/16" CUP | 1 | |
07-522-4708 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 1-7/8" (48 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4302 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4303 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4304 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4305 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4306 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4308 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Round AN430 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4702 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4703 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 3/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4704 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4705 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 5/32" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4706 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 3/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-523-4708 | Cupped Sets For Jiffy Type (Series 'B') Rivet Guns ( Type: Offset Cupped Univeral AN470 )( Diameter: 1/2" (13 Mm) )( Overall Length: 2" (51 Mm) )( Cupping Size: 1/4" ) | 1 | |
07-60-43010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-43012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-43510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-43512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-44210 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Flat AN442 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-44212 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-45510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-45512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-4558 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 1/4" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-45610 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Mod. Brazier AN456 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-45612 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-47010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Universal AN470 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | 1 | |
07-60-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-47012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-60-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-43010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-43012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-43510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-43512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-44212 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-45512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-45612 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-47012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-61-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-43010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-43012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-43510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-43512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-44212 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-45512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-45612 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-47012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-62-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-43010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-43012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-43510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-43512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-44212 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-45512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-45612 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-47012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-63-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-43010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-43012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-43510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-43512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-44210 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Flat AN442 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-44212 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-45510 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-45512 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-4558 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 1/4" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-45610 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Mod. Brazier AN456 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-45612 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-47010 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 5/16" - Universal AN470 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | 1 | |
07-64-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-47012 | Bell Type Rivet Sets .401" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-64-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-43010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-43012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-43510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-43512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-44210 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Flat AN442 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-44212 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-45510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-45512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-4558 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 1/4" - Brazier AN455 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-45610 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Mod. Brazier AN456 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-45612 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-47010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Universal AN470 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-47012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-80-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-43010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-43012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-43510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-43512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-44212 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-45512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-45612 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-47012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-81-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm)) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-43010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-43012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-43510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-43512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-44212 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-45512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-45612 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-47012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-43010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-43012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-43510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-43512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-44212 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-45512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-45612 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-47012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-83-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 10-1/2" (267 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-43010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Round AN430 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-43012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Round AN430 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-43510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Button AN435 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-43512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Button AN435 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-44210 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Flat AN442 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-44212 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Flat AN442 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-45510 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-45512 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-4558 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 1/4" - Brazier AN455 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-45610 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Mod. Brazier AN456 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-45612 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Mod. Brazier AN456 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-47010 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 5/16" - Universal AN470 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-47010BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 5/16" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-47011BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 11/32" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-47012 | Bell Type Rivet Sets .498" Shank ( Cupping Size: 3/8" - Universal AN470 )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-84-47012BAC | Boeing® BACR15FT Mod. Universal Bell Type Rivet Sets ( Cupping Size: 3/8" )( Overall Length: 13-1/2" (343 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U142880 | SET OF 3 STOP BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U142881 | SET OF 3 STOP BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U146111 | SET-OF 3 STOP BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U146116 | SET-OF 3 STOP BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10-400-0192 | ADAPTER CASE BOLT ADAPTER (SET OF 8) - 3X699 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10019 | RIVET SETS 3 1/2" OFFSET & FLUSH 5 PIECE | 1 | |
1005-1 | .401 SHANK RIVET SET - 10?? OFFSET - SIZE: 3/32 , | 1 | |
1005-1-BAC | 3/32" "BAC" Modified Rivet Set - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-10 | .401 Shank Rivet Set - 10° Offset - Size: 1/8", Length: 13-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-11 | .401 SHANK RIVET SET - 10° OFFSET - SIZE: 5/32", LENGTH: 3-1/2" | 1 | |
1005-11-BAC | 5/32" "BAC" Modified Rivet Set - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-12 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 5-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-13 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 7-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-14 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 10-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-15 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 13-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-16 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 3-1/2" | 1 | |
1005-16-BAC | 3/16" "BAC" Modified Rivet Set - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-17 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 5-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-18 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 7-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-19 | .401 SHANK RIVET SET - 10° OFFSET - SIZE: 3/16 , | 1 | |
1005-2 | .401 Shank Rivet Set - 10° Offset - Size: 3/32", Length: 5-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-20 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 13-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-21 | .401 SHANK RIVET SET - 10° OFFSET - SIZE: 1/4", LENGTH: 3-1/2" | 1 | |
1005-21-BAC | 1/4" "BAC" Style Modified Rivet Set - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-3 | .401 Shank Rivet Set - 10° Offset - Size: 3/32", Length: 7-1/2" | 1 | |
1005-4 | .401 Shank Rivet Set - 10° Offset - Size: 3/32", Length: 10-1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1005-5 | .401 Shank Rivet Set - 10° Offset - Size: 3/32", Length: 13-1/2" | 1 | |
1005-6 | .401 Shank Rivet Set - 10° Offset - Size: 1/8", Length: 3-1/2" | 2 | |
1005-6-BAC | 1/8" "BAC" Style Modified Rivet Set - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10280 | DOUBLE OFFSET 3/32” | 1 | |
10281 | DOUBLE OFFSET 3/32” | 1 | |
10282 | DOUBLE OFFSET 5/32 | 1 | |
10283 | DOUBLE OFFSET 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10607 | RIVETING SET OFFSET 3/16 | 1 | |
10759.A.2.3/32 | 3/32" OFFSET SCREWDRIVER 100mm | 1 | |
10759.A.3/32 | TOOL, SCREWDRIVER, OFFSET, HI-LOK 3/32" 50MM | 1 | |
1085280-24 | BOLT, .750-16 UNJF-3A X 2.691, SET OF 24 PCS. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11/32 INCH HI LOC OFFSET WRENCH | 11/32" HI LOC OFFSET WRENCH | 1 | |
11/32 OFFSET HI LOC WRENCH | 11/32" HI LOC OFFSET WRENCH | 1 | |
1112DR40169 | RIVSET OFFSET 3/16 ST1023 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1112MBC4019 | 9/32IN OFFSET RIVET SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1112MBR40153 | RIVET SET OFFSET 5/32 FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1112MDR40159 | RIVSET OFFSET 5/32 FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1112MDR40169 | RIVSET OFFSET 3/16 FT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1177-SCRIBE | OFFSET SCRIBER 230 MM | 1 | |
11AC-115 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
120-910 | HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12AAF673 | Mitutoyo 12AAF673 Ø2mm Ball Offset Probe | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13-1527 | USATCO Offset 'Pancake' Pistol-Grip Air Drills ( Free Rpm: 3000 )( Shaft Offset: 2.49" )( Offset Length: 3.34" )( Overall Length: 7" (178 Mm) ) | 1 | |
13-1529 | USATCO Offset 'Pancake' Pistol-Grip Air Drills ( Free Rpm: 3000 )( Shaft Offset: 3.83" )( Offset Length: 4.88" )( Overall Length: 7" (178 Mm) ) | 1 | |
13-1531 | DRILL,OFFSET PANCAKE,PISTOL 3000 RPM,1/4-28 THD,1/4" CAP | 1 | |
13-1627 | USATCO Offset 'Pancake' Angle-Grip Air Drills ( Free Rpm: 3000 )( Clearance: 2.44" )( Offset Length: 4.81" )( Overall Length: 11" (279 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13-1629 | USATCO Offset 'Pancake' Angle-Grip Air Drills ( Free Rpm: 3000 )( Clearance: 3.79" )( Offset Length: 6.16" )( Overall Length: 12.35" (314 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13-1631 | USATCO Offset 'Pancake' Angle-Grip Air Drills ( Free Rpm: 3000 )( Clearance: 5.13" )( Offset Length: 7.50" )( Overall Length: 13.69" (348 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
140-920 | WINDSHIELD & SKYLIGHT HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
141-900 | COCKPIT HEATSHIELDS (set of 3) | 1 | |
14275 | MACHINIST SQUARES SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
150-170 | WHEELPANT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
150-175 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
155-903 | Mitutoyo 155-903 Telescoping Gauge Set .313-6" (Set of 6) | 1 | |
15O5299 | SHEAR BOLT for 15F2397 (Set of 2 each) | 1 | |
162-600 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16957 | HI-LOK OFFSET BOX WRENCH7/32” X 1/4” | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16958 | HI-LOK OFFSET BOX WRENCH 1/4” X 9/32” | 1 | |
16961 | HI-LOK OFFSET BOX WRENCH 5/16” X 11/32” | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16962 | HI-LOK OFFSET BOX WRENCH 5/16” X 3/8” | 1 | |
172-109 | ENGINE INLET PLUGS (Premier Aircraft Diesel Conversion) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
172-600 | TIRE COVERS, RG models (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
172-KIT3 | Kit 3: Traveler's Kit- Lightweight Canopy Cover + The Basics (only 1968 models & up) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
177-170 | WHEELPANT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
177-220 | WING COVERS (LATE MODELS, '73 & UP), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
177-225 | WING COVERS (LATE MODELS, '73 & UP), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
177-600 | TIRE COVERS (no wheelpant faring) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
180-910 | HEATSHIELD SET, 180/185 models 3 side windows (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
182-600 | TIRE COVERS, RG models (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
195-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20-129-4 | USATCO Angle Drill Attachments 90° Angle Head ( Description: 360° Rotating Offset Head, 1/4 Capacity, 1/4-28 )( Diameter: 3/4" (19 Mm) )( Head Size: 1-1/4" (32 Mm) )( Overall Length: 7-5/8" (194 Mm) )( Side To Center: 0.384" (10 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20-720 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: Straight - 3/8" Offset Thickness )( H' Overall Height: 1-1/8" (29 Mm) )( L1' Shaft Offset: 2-7/16" (62 Mm) )( L2' Overall Length: 3-3/16" (81 Mm) ) | 1 | |
20-725 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: Straight - 3/8" Offset Thickness )( H' Overall Height: 4-9/16" (116 Mm) )( L1' Shaft Offset: 2-7/16" (62 Mm) )( L2' Overall Length: 3-3/16" (81 Mm) ) | 1 | |
20-730 | THIN OFFSET ANGLE DRILL ATTACHMENTS 30° OFFSET - 3/8" ( DESCRIPTION: STRAIGHT - 3/8" OFFSET THICKNESS )( H' OVERALL HEIGHT: 1-1/8" (29 MM) )( L1' SHAFT OFFSET: 3-3/4" (95 MM) )( L2' OVERALL LENGTH: 4-1/2" (114 MM) ) | 1 | |
20-735 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: Straight - 3/8" Offset Thickness )( H' Overall Height: 4-9/16" (116 Mm) )( L1' Shaft Offset: 3-3/4" (95 Mm) )( L2' Overall Length: 4-1/2" (114 Mm) ) | 1 | |
20-745 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: 30° Offset - 3/8" Offset Thickness )( H' Overall Height: 4-9/16" (116 Mm) )( L1' Shaft Offset: 3-1/8" R (79 Mm) )( L2' Overall Length: 4" (102 Mm) ) | 1 | |
20-755 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: 30° Offset - 3/8" Offset Thickness )( H' Overall Height: 4-9/16" (116 Mm) )( L1' Shaft Offset: 3-1/8" L (79 Mm) )( L2' Overall Length: 4" (102 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20-820 | THIN OFFSET ANGLE DRILL ATTACHMENTS 30° OFFSET - 3 | 1 | |
20-825 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: Straight - 1/4" Offset Thickness )( H' Overall Height: 5-3/16" (132 Mm) )( L1' Shaft Offset: 2-7/16" (62 Mm) )( L2' Overall Length: - ) | 1 | |
20-830 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: Straight - 1/4" Offset Thickness )( H' Overall Height: 11/16" (18 Mm) )( L1' Shaft Offset: 3-3/4" (95 Mm) )( L2' Overall Length: - ) | 3 | |
20-835 | THIN OFFSET ANGLE DRILL ATTACHMENTS 30?? OFFSET - | 1 | |
20-845 | THIN OFFSET ANGLE DRILL ATTACHMENTS 30° OFFSET - 3 | 1 | |
20-855 | Thin Offset Angle Drill Attachments 30° Offset - 3/8" ( Description: 30° Offset - 0.290" Offset Thickness )( H' Overall Height: 4-1/8" (105 Mm) )( L1' Shaft Offset: Left )( L2' Overall Length: - ) | 1 | |
20-T-21 | FLAT OFFSET ANGLE DRILL ATTACHMENTS ( H' OVERALL HEIGHT: 5-5/8" (143 MM) )( L1' SHAFT OFFSET: 3/4" (19 MM) )( L2' SHAFT OFFSET: 1-1/2" (38 MM) )( TYPE: 1/8" CAPACITY - 1/4" OFFSET THICKNESS ) | 1 | |
20-T-23 | Flat Offset Angle Drill Attachments ( H' Overall Height: 6-1/2" (165 Mm) )( L1' Shaft Offset: 1-5/32" (29 Mm) )( L2' Shaft Offset: 2-3/16" (56 Mm) )( Type: 1/4" Capacity - 7/16" Offset Thickness ) | 1 | |
20-T-235 | Flat Offset Angle Drill Attachments ( H' Overall Height: 6-5/8" (168 Mm) )( L1' Shaft Offset: 2-5/16" (59 Mm) )( L2' Shaft Offset: 3-3/16" (81 Mm) )( Type: 1/4" Capacity - 7/16" Offset Thickness ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20-T-25 | FLAT OFFSET ANGLE DRILL ATTACHMENTS ( H' OVERALL HEIGHT: 2" (51 MM) )( L1' SHAFT OFFSET: 2-5/16" (59 MM) )( L2' SHAFT OFFSET: 3-3/16" (81 MM) )( TYPE: 1/4" CAPACITY - 7/16" OFFSET THICKNESS ) | 1 | |
20-T-635 | Offset Pancake Snake Drill Attachments ( Orifice: 7/16" (11 Mm) )( Shaft Offset: 2-5/16" (59 Mm) )( Offset Length: 3-3/16" (81 Mm) )( Overall Length: 30" (76 Cm) ) | 1 | |
20.10.X.13 | 10 X 13 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.12.X.13 | 12 X 13 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.13.X.17 | 13 X 17 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.21.X.23 | 21 X 23 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.27.X.30 | 27 X 30 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.27.X.32 | 27 X 32 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.30.X.32 | 30 X 32 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.30.X.34 | 30 X 34 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20.36.X.41 | 36 X 41 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000451 | ULTRA PURE WATER REPLACEMENT FILTERS ( SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
206-101 | ENGINE INLET PLUGS (206H - '98 & up, w/oil cooler inlet plug) (set of 3) | 1 | |
206-121 | TIRE COVERS (newer models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
206L-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
208-116 | PITOT COVERS w/telescoping install tool (for amphib's) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
208-600 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
210-135 | ENGINE INLET PLUGS (Models: T210L, 1971-73) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
210-600 | TIRE COVERS (no wheelpant faring) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
214ST-120 | PITOT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23.12.X.13 | 12x13mm DE RING 10degOFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23.21.X.23 | 21x23mm DE RING 10degOFFSETR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23.30.X.32 | 30x32mm DE RING 10degOFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230-405 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.11/16.X.3/4 | 11/16x3/4 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.13/16.X.7/8 | 13/16x7/8 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.3/8.X.7/16 | 3/8x7/16 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.5/16.X.11/32 | 5/16x11/32 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.5/16.X.3/8 | 5/16x3/8 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
230.A.5/8.X.3/4 | 5/8x3/4 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23054814-6 | NUT – .375-24 UNJF (SET OF 6) INCLUDED IN 23054814 | 1 | |
235.J1 | SET OF 3 STAINLESS STEEL SCRAPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
237.J1 | SET OF 3 FLEXIBLE SPATULAS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2590M00P13 | SOFTWARE VERSION L1A0850 ( EEC FADEC CONTROL) 2590M00P13 1 SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
26-212B | Soft Blank Sets ( Body Length: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
26-215B | Soft Blank Sets ( Body Length: 3/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
280FX-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
280FX-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
280FX-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294888/1 | 1OFF 294888/1 TEST SET - KEVIN MUNN X4838 | 1 | |
2C14745G01 | SET OF 3 TOOL INSTALL-WEAR SLEEVE,HORIZDRIVE SHAFT | 1 | |
2KEX-120 | INTAKE/EXHAUST COVERS, 3-strap type with banding (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2KEX-305 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3" OFFSET SPANNER WRENCH | 3" OFFSET SPANNER WRENCH | 1 | |
300-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
300-405 | BLADE COVERS, hail protection type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
300-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
300-415 | BLADE COVERS (COLD WEATHER TYPE), hail protection type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
300-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
303-110 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
303-115 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
30SSD | SCREWDRIVER, OFFSET FLAT TIP 3/8" | 1 | |
31-324-200 | A300 - FUEL AUTOFEED TEST SET | 2 | |
310-106 | NOSE INLET PLUGS (310J) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-108 | NOSE INLET PLUGS (310Q, louvered vent) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-121 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-123 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-230 | OUTER WING COVERS (310B model), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-235 | OUTER WING COVERS (310B model), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-440 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (310R model), w/ detachable horiz. stab's, WINTER USE (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-445 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) (310R model), w/ detachable horiz. stab's, ALL YEAR USE (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
310-911 | HEATSHIELD SET (1960-65), 3 side windows (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
320-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
320-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
320-901 | COCKPIT HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330-125 | STEP RECESS PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330-400 | BLADE COVERS, STANDARD TYPE (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330-410 | BLADE COVERS, COLD WEATHER TYPE (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
336-110 | REAR ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
337-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
337-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
337-600 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
340-102 | NOSE INLET PLUGS (Cessna 340, not 340A) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
340-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
340-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3402462-1 | GTF6 WITH C130 FUEL CABLE SET , DEPEND ON THE TYPE OF FQIS SYSTEM DIGITAL OR ANALOG. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
340SSDP | SCREWDRIVER, OFFSET PHILLIPS #3 X #4 | 1 | |
3TE65B00776-51 | 2OFF 3TE65B00776-51 TEST SET LEAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4000-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
401-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
401-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
402-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
402-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
404-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
404-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
411-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
411-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
414-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
414-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
421-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
421-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
421-HP1A | PITOT COVERS w/ "WARNING: NOSEGEAR LOCKED, DO NOT MOVE" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
421-HPH | PITOT COVERS AND HEATER INLET SET (on nose) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
425-150 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
425-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
425-HPH | PITOT COVERS AND HEATER INLET SET (on nose) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
43/1123 - K1425 | 43/1123 - K1425 (297 M/M 180° OFFSET EXTENSION TUBE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
441-124 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
441-126 | SPINNER COVERS, 3-blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
441-127 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
441-150 | PITOT COVERS & HEATER INLET PLUG SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
441-HP1A | PITOT COVERS w/ "REMOVE CONTROL LOCKS BEFORE TOWING" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
456MAX-704-43OS | GAGE BILT OFFSET PULLING HEAD FOR GBP704 GUN456MAX-704-43OS | 4 | |
480-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
480-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
480-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
505-500 | BLADE TIE-DOWNS, w/ telescoping attachment pole (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
510-0406 | 3 DISK PROGRAMMING SOFTWARE SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53 530 0110 | WINDOW CLAMPS B737 SET OF 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-10-137 | BAE 146-RJ SERIES REFERENCE STANDARD SET OF 8 UNITS, 53-10-12 PT 6 FIGURE 7 PAGES 907-910. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-10208 | USATCO Rivet Gun Set Packs ( Overall Length: 3-1/2" (89 Mm) )( Pack Type: Straight & Offset 8 PC ) | 1 | |
53-204 | USATCO Rivet Gun Set Packs ( Overall Length: 3-1/2" (89 Mm) )( Pack Type: Offset 4 PC ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-204BAC | USATCO Rivet Gun Set Packs ( Overall Length: 3-1/2" (89 Mm) )( Pack Type: Offset 4 PC BACR15FT ) | 1 | |
53-205 | USATCO Rivet Gun Set Packs ( Overall Length: 3-1/2" (89 Mm) )( Pack Type: Offset 5 PC ) | 1 | |
53-2050 | USATCO Rivet Gun Set Packs ( Overall Length: 3-1/2" (89 Mm) )( Pack Type: Offset 5 PC ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
53-25 | SET ASSORTMENT KIT 31PC ASSORTMENT KIT INCLUDES ASSORTED CUPPED & FLUSH SETS, SOFT BLANKS, SPACER SHIMS & METAL CASE | 1 | |
53-26F | ASSORTED FLUSH RIVET SETS 31PC 3/8 & 1/2" BODY SOFT/HARD | 1 | |
530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
539670-2A | Die set 539670-2 part of LB520244 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
560E-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
560E-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58P-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58P-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58P-910 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58TC-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58TC-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
61-1111 | Blind Hole Spotter Sets ( Description: Set Of 66 )( Sizes: 11/16" To 1" (x 32nds) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
61-18108 | Blind Hole Spotter Sets ( Description: Set Of 108 )( Sizes: 1/8" To 21/32 (x 32nds) ) | 1 | |
69001074-002 | EHHDLU SET, FOR PC GSE NUMBER 583 OF ERJ145 AIRCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
740-4370 | Chucking Reamers High Speed Steel Straight Shank Right Spiral Flute ( Type: Right Spiral Flute )( Shank: Straight & Offset .401 )( Size/diameter: 4370 )( Decimal Equivelant: .4370" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
744C75 | JAW SET - CONSISTS OF 3 PCS | 2 | |
750XL-150 | PROP TIE/EXHAUST COVERS, original stacks (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A-1469-G02 | Wrench, Set of 3, MEC/FP Nuts | 15 | |
856A1336P04 | ADAPTOR OFFSET 13.3 | 3 | |
856A1469G02 | WRENCH SET - RUN ON/OFF, MAIN ENGINE CONTROL - CFM56-3 ENGINE | 15 | |
90-009 | FLAT OFFSET ANGLE ATTACHMENT 4 3/8" OVERALL LENGTH | 1 | |
90-010 | FLAT OFFSET ANGLE ATTACHMENT 5 3/4" OVERALL LENGTH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
90-TF-RISER3 | Bowers 3" Riser Block (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
900EX-120 | EXHAUST PLUGS (folding type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
900EX-125 | EXHAUST PLUGS (non-folding type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
917-15555-11 | SOFTWARE SET VXP EC-135 APPLICATION/VXP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
918 | ROTARY FILE SETS CARBIDE SET OF 9 - 3/32 SHANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6300 | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES | 9 | |
51400 | PNEUMATIC ROTARY BUFFER, 3 INCH DIAMETER, OFFSET HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6799976 | Adapter â Engine Air Inlet Pad (1 Set of 2) NSN 4920003360569 | 2 | |
41041013 | 10 X 13 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41041213 | 12 X 13 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41041317 | 13 X 17 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41042123 | 21 X 23 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41042730 | 27 X 30 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41042732 | 27 X 32 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41043032 | 30 X 32 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41043034 | 30 X 34 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41043641 | 36 X 41 DE OFFSET RING SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41071213 | 12x13mm DE RING 10degOFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41072123 | 21x23mm DE RING 10degOFFSETR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41073032 | 30x32mm DE RING 10degOFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41612022 | 5/16x11/32 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41612024 | 5/16x3/8 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41612428 | 3/8x7/16 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41613640 | 5/8x3/4 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41613840 | 11/16x3/4 OFFSET DE RING SPNR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41614244 | 13/16x7/8 OFFSET DE RING SPNR | 1 | |
43560006 | TOOL, SCREWDRIVER, OFFSET, HI-LOK 3/32" 50MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
43564006 | 3/32" OFFSET SCREWDRIVER 100MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
96894805 | SET OF WHEELS FOR 13217 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
439005134 | MANOMETER BELLOW SET (PART OF PN 439009074) | 1 | |
4333093995 | HT-1650 TGR Professional Brake Line Flaring Tool- 45 and 37 degree Set | 1 | |
8810600104 | SET OF 3 EXTRACTORS | 1 | |
8819316000 | SHIMS (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M47P01 | "ADAPTER,OFFSET-CRANK PAD^3^" | 2 | |
9599-607-15902 | SET - RADIO ALTIMETER TEST, SIM-530 (USED ON TRT ERT-530A) (THOMSON-CSF S. A. (NOW PART OF THALES)) | 7 | |
98D27604000000SET | SPOILER LOCK SET OF 10 EA.A320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D52003003000 | Safety Net PAX Door (Set of 3) | 5 | |
98D52307524000 | 98D52307524000-2D671 (CARGO DOOR SUPPORT (SET OF 2)) | 29 | |
98D71203004000 | ENGINE OFFSET WRENCH (SETOF 3) - CFM56-5 | 10 | |
98F34103001000 | ADAPTOR PITOT PROBE[set of 3 adaptors]**EQUIV TOOL | 15 | |
99-3700 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3700 ) | 2 | |
99-3701 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3701 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3702 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3702 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3703 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3703 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3704 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3704 ) | 1 | |
99-3705 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3705 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3706 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3706 ) | 1 | |
99-3707 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3707 ) | 1 | |
99-3708 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3708 ) | 1 | |
99-3709 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3709 ) | 3 | |
99-3710 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3710 ) | 3 | |
99-3711 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3711 ) | 1 | |
99-3712 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3712 ) | 1 | |
99-3713 | OFFSET NOSE ASSY(3/16" BLIND BOLT) | 4 | |
99-3714 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3714 ) | 3 | |
99-3715 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3715 ) | 2 | |
99-3716 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3716 ) | 2 | |
99-3717 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3717 ) | 1 | |
99-3718 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3718 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3719 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3719 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3720 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3720 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3721 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3721 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3728 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3728 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3728-1 | OFFSET NOSE ATTACHED 13/64" (06) IO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3729 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3729 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-3730 | Huck Nose Assemblies / Pulling Heads - Offset ( Pilot Diameter: 99-3730 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-PS60 | SET, SCREWDRIVER - BRISTOL WRENCH (XCELITE) (MINIMUM ORDER OF 3 REQUIRED) (ARONSON-CAMPBELL INDUSTRIAL SUPPLY CO.) | 3 | |
99D51407291001 | AIRBUS CARBON LAMINATE THICKNESS REFERENCE STANDARD SET A318-A321 51-10-06-PB4 MULTIDIRECTIONAL FABRIC MATERIAL, BLOCKS 01-06 INCLUDES WATERPROOF CASE. NOMINAL THICKNESSES OF 1MM, 3MM, 5MM, 9MM, 15MM, 19MM. INCLUDES TEST REPORT AND CERTIFICATE OF CON... | 7 | |
99D55109001000 | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK SET OF 4 INCLUDES WATERPROOF CASE. NOMINAL THICKNESS (1MM, 3MM, 5MM, 7MM). INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 7 | |
99D57004000000 | Airbus Calibration Standard Block Set. A340-200/-300 51-63-03 Pg. 2-3, A300, A300-600, A310, A318/A319/A320/A321, A330, A340, A380 51-34-03, Figure 1 Sheett 1 Pg.1-2. Material: AMS-QQ-A-250 2024-T351 Aluminum. Includes Test Report and Certificate of C... | 4 | |
99D57004001000 | AIRBUS A318/A319/A320/A321 CALIBRATION BLOCK SET. 51-63-03-PB1 PAGES 4&5, FIGURE 51-63-03-991-002-A SHEET 01 and FIGURE 51-63-03-991-002-A SHEET 03. Includes Test Report and Certificate of Conformance. | 4 | |
99D57204163000 | AIRBUS REFERENCE BLOCK SET A318/A319/A320/A321 Part 4 Figure 57-29-06-991-004-A, Set includes 99D57204163000-A, 99D57204163000-B, 99D57204163000-C. Includes Test Report and Certificate of Conformance. | 3 | |
99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
99N51107332000 | AIRBUS REFERENCE STANDARD A380-800 51-10-30-991-003-A FOR CLADDING MEASUREMENT BLOCK SET. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
A10-520 | AFT BELLY ANTENNA COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A10-535 | FORWARD BELLY ANTENNA COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A10-550 | TIRE COVERS (Nose & Main w/ chain weight bottom hem) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A109-200 | EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A19-910 | HEATSHIELD SET (3 SIDE WINDOWS) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A23-111 | ENGINE INLET PLUGS, includes carb. inlet plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A23-300 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A23-915 | HEATSHIELD SET (3 SIDE WINDOWS) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A26-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A26-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27092-31 | ACTUATOR (4EA) - 3 SETS OF 4 EA = 12 EA REQUIRED | 10 | |
A292683 | CRANKSHAFT DEFLECTION GAUGE TOOL NO. A292683 SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON VEE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (6-1/4 IN. TALL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A292704 | CONNECTING ROD HYDRAULIC JACKS (VEE ENGINES) TOOL NO. A292704 (SET OF 2) SET OF TWO HYDRAULIC JACKS FOR PRELOADING THE CONNECTING ROD STUDS ON INLINE ENGINES. MUST BE USED WITH A292539 HYDRAULIC PUMP KIT. (4 IN. TALL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A300-120 | PITOT COVERS heat resistant type (two connected, one free) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A31003-25 | 1OFF A31003-25 POWER SUPPLY TESTSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A315-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A315-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A315-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A315-600 | TAIL ROTOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A315-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A316B-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A316B-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A316B-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A316B-600 | TAIL ROTOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A316B-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A318C-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A318C-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A318C-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A318C-600 | TAIL ROTOR BLADE COVERS, EACH, 3-blade system (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A319-120 | PITOT COVERS heat resistant type, OEM P/N: 98A10001005000 (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A320-101 | INTAKE PLUGS, folding type CFM56-5B4/3 Engine (set of 2) | 9 | |
A320-112 | INTAKE COVERS, CFM56-5B4/3 (set of 2) | 1 | |
A320-120 | PITOT COVER, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A320-252 | EXHAUST PLUGS w/ nozzle cover, CFM-56, equiv. OEM P/N: RSE1132 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32045-57 | WRENCH OFFSET 3.75 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A330-120 | PITOT COVERS heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A330-57-004 | SET OF FIXING TREADS S13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A340-105 | INTAKE COVERS, CFM56-5C engines (OEM P/N: RSE3406) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A340-110 | INTAKE COVERS, A340 models w/ RR Trent engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A340-120 | PITOT COVERS heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A341-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A341-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A341-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-415 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down add-on detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-420 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down & hail padding (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A350-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-200 | ENGINE EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-415 | BLADE COVERS (COLD WEATHER TYPE), w/ blade tie-down detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A355-501 | BLADE TIE-DOWNS w/semi-rigid upper & lower surface (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AA1-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AA1-105 | ENGINE INLET PLUGS (AA1C LYNX) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AA1-106 | ENGINE INLET PLUGS (AA1B YANKEE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AA5-510 | WHEELPANT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC500-130 | PROPELLOR/SPINNER COVERS, 3 blade (500 & 520) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC500-132 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (500 & 520) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC500-170 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC680-150 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC680-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC690-160 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AC690-165 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ACRS3-172942 | CALIBRATED CONDUCTIVVITY REFERENCE STANDARD SET OF 3. KIT CONSISTS OF MAGNESIUM, 6061-T6 AL AND 2024-T3 AL ( IACS Nominal values of 17%, 29% and 42% respectively) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AD5-100 | FORWARD ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AD5-150 | AFT ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AD5-160 | AFT ENGINE EXHAUST PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2048/AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. Includes Custom fit Waterproof Case. Includes Test Rep... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2048/AST/CASE | CUSTOM NAVY BLOCK SET, 3 BLOCKS 7075-T6, 4340, 6AL-4V ,WITH 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES NOTCHES,( WITH CASE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2113/2024 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2113/7075 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-304DAA19 | ASTM DISTANCE AMPLITUDE SET OF 19 304 STAINLESS STEEL (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3114 | 16 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3115 | 16 HOLE REFERENCE STANDARD 4340 CRES STEEL. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Includ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3116 | 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-4340DAA19 | ASTM DISTANCE AMPLITUDE SET OF 19 4340 CARBON STEEL (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-6AL-4VDAA19 | ASTM DISTANCE AMPLITUDE SET OF 19 6AL-4V TITANIUM (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-7075DAA19 | ASTM DISTANCE AMPLITUDE SET OF 19 7075-T6 ALUMINUM (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-DAC3 | SET OF 3 DAC BLOCKS,(DISTANCE/AREA AMPLITUDE SET) 7075-T6 ALUMINUM...3/64" , 5/64", 8/64"FLAT BOTTOM HOLES WITH METAL TRAVEL DISTANCES OF (1/8",1/4", 1/2", 3/4", 1 1/2", 3") | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-DAC7 | SET OF 7 DAC BLOCKS,(DISTANCE/AREA AMPLITUDE SET) 7075-T6 ALUMINUM...3/64" FLAT BOTTOM HOLES WITH METAL TRAVEL DISTANCES OF (1/8",1/4", 1/2", 3/4", 1", 1 1/4", and 1 3/4") | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-200 | BLADE COVERS (std type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-201 | BLADE COVERS w/tie-down add-on (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-210 | BLADE COVERS (cold weather type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-211 | BLADE COVERS cold weather type w/tie-down add-on (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH120-230 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH130-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH130-405 | BLADE COVERS, cold weather type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH130-410 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH130-415 | BLADE TIE-DOWNS w/semi-rigid upper & lower surfaces (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH130-900 | WINDSHIELD HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-110 | INTAKE PLUGS (OEM P/N: B103P0007102) (set of 6) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-120 | EXHAUST COVERS (OEM P/N: B103P0081101) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-206 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type), D3 5-blade (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-225 | BLADE TIE-DOWNS (fabric type) (D3 5-blade models) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-226 | BLADE TIE-DOWNS, w/telescoping attachment handle (D3 5-blade models) (set of 6) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH145-700 | PITOT COVERS (OEM P/N: L132M0014101) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH350-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH350-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH350-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH350-415 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down add-on detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH350-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-200 | ENGINE EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-415 | BLADE COVERS (COLD WEATHER TYPE), w/ blade tie-down detail (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH355-501 | BLADE TIE-DOWNS w/semi-rigid upper & lower surface (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AH365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ALA-115 | ENGINE INLET PLUGS, includes carb. inlet plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ALT-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APA-901 | HEATSHIELD SET (Geronimo windshield, 3 side windows) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APA-903 | HEATSHIELD SET (original windshield, 3 side windows) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ASG-210 | WING COVERS, ASG-32, all year use (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AST4769-2 | Set of 3 Retaining Bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT-101A-3-1/8 | OFFSET RIVET SET AT-101A-3-1/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT101A-3 3/16 | RIVET SET OFFSET 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATBR-3134 | SET OF HI LOK. RATCHET (FASTENER) - 5/16"X 11/32" | 1 | |
ATBRO-3134E | OFFSET BOX RATCHET WRENCH L=4-3/32 A=5/16 B=11/32 D=3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATBRO2125 | OFFSET BOX RATCHET 7/32'' X 1/4'' | 1 | |
ATBRO3134 | "5/16""&11/32""OFFSET BOX RATCHET | 1 | |
ATI101A3316F | RIVET OFFSET 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI105A-7/32 | DOUBLE OFFSET FLUSH 7/32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATITD154H3-2 | RIVET SET HUCKSTUMP-OFFSET5/32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATITD154H3-3 | RIVET SET HUCKSTUMP-OFFSET3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATITD154H311 | RIVET SET HUCKSTUMP-OFFSET5/32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATR-510 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATSK3675 | 1-1/16 COMBO WR 3IN OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AVD-150 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AZL02339-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE SPOILERS - A320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AZL04543-R00 | TOOLS SET FOR REM/INST SLEEVES/BEARINGS OF THE ELEVATORS - A320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B100-150 | PITOT COVERS w/ "WARNING: DO NOT TOW" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B100-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B100-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B105-120 | EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B17-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B18-125 | PROPELLOR/SPINNER COVERS, 3 Blade Hartzell (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B18-126 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade Hartzell (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200-150 | PITOT COVERS w/ "WARNING: NOSEGEAR LOCKED, DO NOT MOVE" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200-155 | INSULATED SPINNER COVER, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200-902 | CABIN HEATSHIELDS (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B24-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B25-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B25-910 | COCKPIT SKYLIGHT HEATSHIELDS (does not include eyebrow) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27036-18 | 3"OFFSET L/E SLAT SPLINE WRENCH | 1 | |
B2B-200 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B2B-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B300-901 | CABIN HEATSHIELDS (set of 13) | 1 | |
B35-105 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, not for "hot prop" (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-107 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, with "hot prop" (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-108 | FRESH AIR INLET/EXHAUST PLUGS (NOT FOR V35 MODELS) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-300 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-301 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-902 | HEATSHIELD SET (sm Windshield, lg 3rd) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-903 | HEATSHIELD SET (sm Windshield, sm 3rd) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-904 | HEATSHIELD SET (sm Windshield, no 3rd) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-905 | HEATSHIELD SET (lg Windshield, no 3rd) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-906 | HEATSHIELD SET (lg Windshield, sm 3rd) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B35-910 | HEATSHIELD SET (lg Windshield, lg 3rd) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-100 | ENGINE INLET PLUGS (G36 Models "NO HOT PROP") (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-105 | ENGINE INLET PLUGS (285HP-300HP) LARGE BONANZA, not for "hot prop" (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-106 | ENGINE INLET PLUGS (36 Models with "HOT PROP") (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-109 | ENGINE INLET PLUGS (Tradewinds Turbine) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-215 | WING COVERS (A36 models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-220 | WING COVERS (A36 models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-225 | WING COVERS (B36 models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-226 | WING COVERS (B36 models), WINTER USE, padded for hail protection (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-230 | WING COVERS (B36 models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-231 | WING COVERS (B36 models), ALL YEAR USE, padded for hail protection (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-235 | WING COVERS (G36 models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-240 | WING COVERS (G36 models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-300 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-301 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-310 | HORIZONTAL STABILIZER COVERS (36 models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-315 | HORIZONTAL STABILIZER COVERS (36 models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-320 | HORIZONTAL STABILIZER COVERS (36 models) padded for hail protection, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-325 | HORIZONTAL STABILIZER COVERS (36 models) padded for hail protection, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B36-902 | HEATSHIELD SET (36 Models) (set of 9) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B47-400 | BLADE COVERS (203", 206" & 215" lengths) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B47-410 | BLADE COVERS (COLD WEATHER TYPE 203", 206" & 215" lengths) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B50-900 | WINDSHIELD HEATSHIELD (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B50-910 | HEATSHIELD SET, Specify Windshield Size (3 SIDE WINDOWS) (set of 9) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B55-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B55-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B55-902 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B58-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B58-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B58-170 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B58-910 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B60-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B60-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B60-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B707-151 | INTAKE/EXHAUST COVER SET, soft type, TF-33 engines (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B707-155 | INTAKE COVERS, TF-33 engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B707-220 | BYPASS VENT & TURBINE EXHAUST PLUGS, TF-33 engines (set of 12) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B717-807 | WASH PREP: APU Exhaust and PAC A/C Exhaust PLUGS, 1 left, 2 right side, above engines (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B717-808 | WASH PREP: Static Port STICKER, both sides, 12" dia. (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B727-101 | INTAKE PLUGS (folding type, Hush Kit) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B727-102 | EXHAUST PLUGS (folding type, Hush Kit) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B727-105 | INTAKE PLUGS (folding, outboard only, engines #1 & #3) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B727-110 | INTAKE/EXHAUST COVERS (Engines #1 & #3) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-100 | INTAKE COVERS, 300-500 models (set of 2) | 1 | |
B737-101 | INTAKE COVERS, 300-500 models, w/ heater hose access vent & - SET OF 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-102 | INTAKE PLUGS (folding), 300-500 models - SET OF 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-152 | INTAKE PLUGS (folding), 600-900 models (NG), NSN: 1730-01-646-8564 - SET OF 2 | 1 | |
B737-200 | BYPASS & EXHAUST PLUGS, folding donut ring type, 300-500 models - SET OF 6 | 1 | |
B737-260 | EXHAUST NOZZLE CAPS, NSN: 1730-01-647-0136 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-270 | APU INTAKE/EXHAUST/COOLING PLUGS 600-900 models (NG / - SET OF 3 | 1 | |
B737-273 | APU INTAKE PLUG, 300-500 models - SET OF 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-276 | APU EXHAUST PLUG 300-500 models - SET OF 1 | 1 | |
B737-278 | APU INTAKE/EXHAUST PLUGS 300-500 models (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B737-405 | PITOT COVERS w/ AOA STRAP, heat resistant type, 300-500 models - SET OF 6 | 1 | |
B747-106 | INTAKE COVERS, E-4, -200, and -300 models, GE CF6-50 engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B76-105 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B76-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B76-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B767-202 | BYPASS VENT & TURBINE EXHAUST PLUGS, PW JT9D Engines (Single Nacelle) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B767-203 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B777-410 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B78020-1 | RETAINING PIN SET (3 OFF) TOOL | 4 | |
B787-405 | TAT COVER, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B80-120 | PROPELLOR/SPINNER COVER, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B80-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B90-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B90-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B90-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B901-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B901-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B901-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B95-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B95-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B99-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B99-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BA-99-3728 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3728 ) | 1 | |
BA-99-3729 | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3729 ) | 1 | |
BAT-10118 | Rivet Set Kit - 4 Piece Offset - 3-1/2" - Imported | 1 | |
BAT-10122 | RIVET SET KIT - 3 PIECE OFFSET FLUSH | 1 | |
BAT-105-4OS | "Suicide" Flush Rivet Set - 3-1/2" Offset - MADE IN THE USA! | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-1315-3 | "Jiffy" Short Shank Rivet Set - 3/32" Offset | 2 | |
BAT-1315-5 | "Jiffy" Short Shank Rivet Set - 5/32" Offset | 2 | |
BAT-1315-6 | "JIFFY" SHORT SHANK RIVET SET - 3/16" OFFSET | 1 | |
BAT-140 | 3-1/2 LONG FLUSH RIVET SET - OFFSET - MADE IN TH | 1 | |
BAT-3ALMOS | Aluminum Face Flush Set - USA MADE - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-3BRSOS | Brass Flush Set - USA MADE - 3-1/2" Offset | 1 | |
BAT-3NYLOS | Nylon Flush Set - USA MADE - 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-845 | Long Offset "Pancake" Drill Attachment - 30° Right Hand Attachment - MADE IN USA! | 1 | |
BAT-855 | LONG OFFSET 30 DEGREE PANCAKE DRILL (LEFT) | 1 | |
BAT-SW3PC | 3PC SET OF SKIN WEDGES | 1 | |
BATBRO-2528 | Offset Box Ratchet for Hi-Lok Installation (1/4" x 9/32") | 1 | |
BATBRO-3134 | Offset Box Ratchet for Hi-Lok Installation (5/16" x 11/32") | 1 | |
BD4-100 | INLET PLUGS (BD-4C) (Set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BDG-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEA-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BJET-118 | ENGINE COVERS, W/TR'S (for 400XT Nextant Conv., FJ44-3AP Engines) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BL52565 | SET-OF 3 STOP BUSHES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BMUS-005 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BMUS-101 | ENGINE INLET PLUGS, Sam James Cowl (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BNI-100 | ENGINE INLET PLUGS (includes 3rd inlet plug) (set of 6) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BNI-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BNI-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BRZ-300 | HORIZONTAL & VERTICAL STABILIZER COVERS, ALL YEAR USE (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BS02077 | SET OF ADAPTORS 1/2 AND 3/4 FOR TORQWRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BTA-72047 | WHEEL & BEARING PROTECTOR SET FOR 737-NG LOW PROFILE MAIN WHEEL, T-BAR: LG, COLOR: LIME GREEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C130-121 | FLIGHT DECK A/C INLET/EXHAUST PLUG SETS: H, J, T, P & U-models (on right side, below cockpit area), NSN 1730-01-530-6757, "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
C130-135 | FADEC PLUGS (C-130J model) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C130-141 | CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS: H, J, T, P & U models, NSN 1730-01-530-6758 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
C130-152 | MAIN ENGINE INLET PLUGS, heavy duty type, NSN 1730-01-530-6759 "SHIELD, AIRCRAFT GROUND SERVICING" (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C130-163 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
C130-900 | FLIGHT DECK HEATSHIELD SET (standard models), NSN: 1680-66-164-1476 (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C17-110 | INTAKE COVERS, light weight travel type (30 Lbs In Storage Bag) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C17-305 | EXHAUST COVERS, Equivalent or Better to NSN 1730-01-358-0936, MD P/N: 17G110001-1 (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C205-120 | WHEEL COVERS (no wheelpant faring) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C212-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C212-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C23-910 | HEATSHIELD SET (3 SIDE WINDOWS) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C235-210 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C300-122 | INTAKE/EXHAUST COVERS, 3-strap type (w/ banding) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C300-260 | STATIC WICK PROTECTORS (CL-350) (set of 10) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C300-261 | STATIC WICK PROTECTORS (CL-300) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C300-375 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32026-1 | L/G DOWNLOCK PINS (SET OF 3) | 26 | |
C32026-1-TOOL | GROUND LOCK ASSY PINS (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32026-6 | L/G DOWNLOCK PINS (SET OF 3) | 13 | |
C350-110 | ENGINE INLET PLUGS, 350 models (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C46-120 | PROPELLOR/SPINNER COVERS, 3 BLADE SET OF 2 | 1 | |
C46-121 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
C500-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C500-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C510-210 | PITOT COVER/AOA SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C510-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C510-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C510-405 | STATIC WICK PROTECTORS, 3 per wing, 1 on tailcone area (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C52012-29 | SET OF BARRIER ASSEMBLY PN. C52012-30 AND STORAGE BOX | 12 | |
C550-205 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C550-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C560-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C565-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C565-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C565-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C600-120 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C601-120 | TIRE COVERS (model 601) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C604-127 | PITOT COVERS, heat resistant type, includes standby Pitot (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C680-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C680A-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C700-111 | INTAKE/EXHAUST COVERS, 3-strap type, includes wedge plugs under nacelle (set of 6) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C71001-1 | OFFSET SPANNER 13IN - CONE BOLT cfm56-3 | 10 | |
C71006-9 | PROTECTORS, CONE BOLT THREAD - CFM56-3 (SET OF 3) | 25 | |
C71014-3 | OFFSET SPANNER 13IN | 14 | |
C78012-14 | HOLD OPEN ROD SET, CFM56-3 THRUST REVSET OF 2 HOLD OPEN RODS IN STORAGE CASE | 21 | |
C90A-160 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C90A-161 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C90A-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C90B-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C90B-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C90B-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CC-5PC130 | 5 Piece Set of 130° HSS Countersink Cutters | 1 | |
CC11-115 | ENGINE INLET PLUGS, prior to 2012 (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CC18-501 | TIRE COVERS (NX Model, includes nose gear tire cover) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-401 | BLADE COVERS, w/ tie downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-402 | BLADE COVERS, w/hail protection, w/ tie downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-411 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-412 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-620 | TAIL FIN COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CG2-621 | TAIL FIN COVERS w/hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH46-900 | COCKPIT HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH47-200 | ROTOR HUB COVERS, Equivalent or better than OEM P/N: 1730-CHSE-026 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH47-255 | PITOT COVERS, F Models (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-401 | BLADE COVERS, w/ tie downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-402 | BLADE COVERS, w/hail protection, w/ tie downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-411 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-412 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-620 | TAIL FIN COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH77-621 | TAIL FIN COVERS w/hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ1-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ2-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ2-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ3-201 | PITOT COVER SET, heat resistant type, includes "Standby" Pitot Cover (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ3-204 | PITOT, AOA COVER SET, heat resistant type (for CJ3+ models) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ3-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ4-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJ4-400 | STATIC WICK PROTECTORS, 3 per wing, 1 on tailcone area (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-110 | PROP TIE-DOWN/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CRJ-150 | PITOT COVERS, heat resistant type, includes standby Pitot (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CROWSFOOT-2-7/16 AF | CROWSFOOT-2-7/16 (3 " OFFSET) TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CTSW-170 | WHEELPANT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CXL-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D-SPC8 | Bessy® SuperPower Snips 1.2 Mm Material Capacity ( Cut Length: 1-3/4" (45 Mm) )( Overall Length: 8-1/2" (216 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D328-200 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D44-1426-1 (1400999-121) | 737 2KU Adapter Plate Inst Tool (gogo) (Set of 3) | 1 | |
D47479 | OFFSET ALLEN WRENCH TYPE 5/32 | 3 | |
D55-135 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D55-136 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA40-105 | ENGINE INLET PLUGS, specify engine and model (Includes 3rd inlet plug) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA40-400 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA40-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA40-420 | EMPENNAGE COVER SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, hail protection type, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA40-425 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, hail protection type, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA42-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA42-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA42-275 | LANDING GEAR & GEARWELL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA62-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA62-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DA62-275 | LANDING GEAR & GEARWELL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC10-100 | INTAKE COVERS, GE CF6 engine (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC10-105 | INTAKE COVERS, PW 4000 series engine (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC10-150 | INTAKE PLUGS, folding type, GE CF6 engine (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC3-120 | PROPELLOR/SPINNER COVERS, 3 BLADE SET OF 2 | 1 | |
DC3-121 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC3-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC3-910 | CABIN HEATSHIELDS (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC8-115 | EXHAUST PLUGS, Bypass Vent and Exhaust, 3 per engine (set of 12) (set of 12) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC8-200 | ENGINE STORAGE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH1-100 | ENGINE INLET PLUGS (English Model) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH2-111 | ENGINE PLUGS (radial engine, has spinner) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH2-150 | PROP TIE/EXHAUST COVER SET (Turbo Models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH3-110 | PROP TIE/EXHAUST COVER SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH4-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH4-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH6-147 | INSULATED PROPELLOR HUB COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH6-148 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH6-149 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DO27-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DS1010A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 5/32"-5/32" | 1 | |
DS1212A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 3/16" - 3/16" | 2 | |
DS1820A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 9/32" - 5/16" | 1 | |
DS2018A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 5/16" - 9/32" | 1 | |
DS2224A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 11/32" - 3/8" | 1 | |
DS2422A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 3/8" - 11/32" | 1 | |
DSK-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DSM810K | 10 PC METRIC 15°/ 60° OFFSET OPEN‐ END IGNITION WRENCH SET (3.2‐11 MM) | 2 | |
DZZ7352-7 | Set of two guides (part of DZZ7352-1 kit) | 2 | |
E120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E120-200 | BLADE COVERS (std type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E120-201 | BLADE COVERS w/tie-down add-on (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E120-210 | BLADE COVERS (cold weather type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E120-211 | BLADE COVERS cold weather type w/tie-down add-on (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E120-230 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E130-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E130-405 | BLADE COVERS, cold weather type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E130-410 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E130-415 | BLADE TIE-DOWNS w/semi-rigid upper & lower surfaces (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E130-900 | WINDSHIELD HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E135-700 | ENGINE EXHAUST PLUGS, exhaust & aft doghouse plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E135-710 | ENGINE EXHAUST PLUGS, exhaust & aft doghouse plug, P2 models (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E350-103 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ECL-204 | STATIC WICK COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ECL-205 | PITOT COVERS, HEAT RESISTANT TYPE (SET OF 3) | 1 | |
ELT-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EUR-910 | HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXQ31 | 9/16 DBL HX OFFSET TQ ADP 3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F-72999-4 | 3.00 OFFSET SPANNER WRENCH | 1 | |
F10-201 | PITOT/TAT PROBE COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F15-100 | ENGINE INLET COVERS, NSN: 1730-01-681-4502 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F15-110 | ENGINE INLET PLUGS, NSN: 1730-01-573-3631 SHIELD, AIRCRAFT GROUND SERVICING (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F15-410 | HORIZONTAL STAB. COVERS (padded for hail protection) NSN 1730-01-677-9969 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F15-420 | HORIZONTAL STAB. COVERS, hvy duty, padded for maintenance protection, NSN 1730-01-697-6253 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-160 | TOTAL AIR TEMP PROBE TAT COVER, NSN 1730-01-542-3477 "COVER,AIRCRAFT GROUND SERVICING" (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-500 | TIRE COVERS (smaller main tire size, 25.5" Diam.) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-501 | TIRE COVERS (smaller main tire size, 25.5" Diam. w/ chain-weight bottom hem) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-510 | TIRE COVERS (larger main tire size, 27.75" Diam) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-511 | TIRE COVERS (larger main tire size, 27.75" Diam w/ chain-weight bottom hem) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F16-900 | CANOPY HEATSHIELDS (A, C & N models), NSN: 1730-01-541-5772 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F18-150 | UHF ANTENNAE COVER SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F18-900 | HEATSHIELD SET (single seat model A/C), NSN 1730-01-388-0155, "SOLAR SHIELDS" (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F18-910 | HEATSHIELD SET (tandem seat model B/D), 'Brand Name or Equivalent' to NSN 1730-01-387-9533 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F1R-030 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F1R-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F20-120 | ENGINE COVERS (731'S, NO TR'S) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F20-130 | ENGINE COVERS (731'S, WITH TR'S) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F20-131 | ENGINE COVERS (731'S, WITH TR'S), w/HF ant on left engine (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F20-133 | ENGINE COVERS (731'S, NO TR'S), w/HF ant on left engine (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F280-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F280-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F280-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28A-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28A-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28A-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28C-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28C-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28C-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28C-501 | BLADE TIE-DOWNS, PADDED (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F50-126 | EXHAUST PLUGS (folding type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F50-140 | INSULATED FULLY ENCLOSED ENGINE COVERS (#1 & #3 engines), Intake Plug & Insulated Exhaust cover (#2 Engine) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F50-306 | PITOT COVERS, AOA STRAPS, TAT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F50E-300 | PITOT COVERS, AOA STRAPS, TAT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F6X-100 | INTAKE/EXHAUST COVERS, 3-strap type (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70312-27 | WRENCH- CROWSFOOT/OFFSET 3.1/4" | 12 | |
F70312-28 | CROWFOOT OFFSET- 3 IN | 4 | |
F70312-32 | WRENCH,OOFSET 3.5" | 8 | |
F70312-47 | WRENCH- CROWSFOOT/OFFSET 3" | 11 | |
F70312-49 | WRENCH,CROWFOOT MLG OFFSET 3.3/8" | 2 | |
F7F-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7F-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7X-105 | INTAKE/EXHAUST COVERS FOR ENGINES #1 & #3, INCLUDES #2 EXHAUST (ATTACHES WITH HOOKS) (SET OF 5) | 1 | |
F7X-110 | INTAKE/EXHAUST COVERS for engines #1 & #3 (inboard/outboard straps) (set of 4) | 1 | |
F7X-115 | INTAKE/EXHAUST COVERS for engines #1 & #3, includes #2 exhaust (inboard/outboard straps) (set of 5) | 1 | |
F7X-120 | EXHAUST PLUGS (NON-FOLDING TYPE) (SET OF 3) | 1 | |
F7X-125 | EXHAUST PLUGS (folding type) (set of 3) | 1 | |
F80190-1 | RUDDER BALANCE WEIGHT SEALS OFFSET SCREWDRIVER (BOEING 737-100/200) | 4 | |
F900-120 | EXHAUST PLUGS (non-folding type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F900-125 | EXHAUST PLUGS (folding type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FACOM 222A.TJ32 | SET OF 32 GROUND TWIST DRILLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FAL-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FBA-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FD328-205 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FHOF80A20 | 3/8 OFFSET FLEX HD RAT HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FIRE BOTTLE SQUIB | (SET OF 3) A300 SQUIB BLANK TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G115-105 | ENGINE INLET PLUGS, includes carb. inlet plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G115-900 | COCKPIT HEATSHIELDS, complete coverage, Model 115E Tutor T1 (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G164-100 | PROP TIE-DOWN/EXHAUST COVERS COMBINATION (Super B model) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G200-121 | INTAKE/EXHAUST COVERS, 3-strap type, G280 models (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G200-122 | INTAKE/EXHAUST COVERS, 3-strap type with banding, G280 models (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G21-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G21-910 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-100 | INTAKE COVERS, SNAP-ON TYPE, equivalent to Gulfstream p/n's LC42904001-23 & LC42904001-24 (set of 2) | 1 | |
G4-102 | INTAKE COVERS (for installation with factory hooks), equivalent to Gulfstream p/n's LC42904001-23 & LC42904001-24 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-106 | INTAKE PLUGS (folding type) WITH CUSTOM STORAGE BAG (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-111 | EXHAUST PLUGS (G-IV) (folding type) WITH CUSTOM STORAGE BAG (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-113 | EXHAUST PLUGS (G450) (folding type) WITH CUSTOM STORAGE BAG (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-140 | INTAKE/EXHAUST COVERS, 3-strap type with banding (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G4-201 | PITOT COVER SET, heat resistant type (includes 3rd "standby" pitot on left side), equivalent to Gulfstream p/n PC155-89SB (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G44-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G44-125 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G44-126 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G44-900 | COCKPIT HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G5-100 | INTAKE PLUGS (folding type), NSN 1730-01-667-2953 (set of 2) | 1 | |
G5-120 | EXHAUST PLUGS (folding type), NSN 1730-01667-2949 (set of 2) | 1 | |
G5-140 | INTAKE/EXHAUST COVERS, 3-strap type with banding (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G5-208 | PITOT COVERS (G450), heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G73-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G73-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G73-800 | PITOT COVERS w/ install tool (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GA200-110 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GA8-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GB1-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GB8-100 | ENGINE INLET PLUG (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GEX-140 | INTAKE/EXHAUST COVERS, 3-strap type with banding (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GIL-100 | ENGINE PLUG SET, model 200 (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GL1-010 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GL2-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GOSGX40RH | 32MM BOX END OFFSET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GR5-900 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS2-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS2-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB1200014 | BIT-OFFSET CRUCIFORM (3/8")(SERIES 400) | 1 | |
GXDES2430 | 24 X 30 SPLNE WR 60 OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GXID1618ANP | 1/4X9/32 DHX OFFSET BLK WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-20-4 | Drive Sets For Huck® .401" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-20-5 | Drive Sets For Huck® .401" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-20-6 | Drive Sets For Huck® .401" Shank ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-21-5 | Drive Sets For Huck® .401" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-21-6 | Drive Sets For Huck® .401" Shank ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-22-5 | Drive Sets For Huck® .401" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-22-6 | Drive Sets For Huck® .401" Shank ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-40-4 | Drive Sets For Huck® .498" Shank ( Cupping Size: 1/8" )( Overall Length: 3-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-40-5 | Drive Sets For Huck® .498" Shank ( Cupping Size: 5/32" )( Overall Length: 3-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-40-6 | Drive Sets For Huck® .498" Shank ( Cupping Size: 3/16" )( Overall Length: 3-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-41-5 | Drive Sets For Huck® .498" Shank ( Cupping Size: 5/32" )( Overall Length: 5-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-41-6 | Drive Sets For Huck® .498" Shank ( Cupping Size: 3/16" )( Overall Length: 5-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-42-5 | Drive Sets For Huck® .498" Shank ( Cupping Size: 5/32" )( Overall Length: 7-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-42-6 | Drive Sets For Huck® .498" Shank ( Cupping Size: 3/16" )( Overall Length: 7-1/2" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-60-10 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .401" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 5/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-60-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .401" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-60-8 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .401" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-61-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .401" )( Overall Length: 5-1/2" (140 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-62-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .401" )( Overall Length: 7-1/2" (191 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-80-10 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .498" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 5/16" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-80-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .498" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-80-8 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .498" )( Overall Length: 3-1/2" (89 Mm) )( Cupping Size: 1/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-81-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .498" )( Overall Length: 5-1/2" (140 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H 07-82-12 | Bell Type Drive Sets For Huck Stump Collars ( Type: Offset )( Shank Size: .498" )( Overall Length: 7-1/2" (191 Mm) )( Cupping Size: 3/8" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H1000-116 | PITOT COVERS/AOA STRAP, heat resistant type (includes standby pitot tube) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H1000-200 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H400-110 | ENGINE COVERS (731'S, NO TR'S) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H400-120 | ENGINE COVERS (731'S WITH TR'S) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H400-200 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H563-6B | PULLING HEAD,OFFSET,LOCKBOLT 3/16 FOR G84352 | 1 | |
H563SP-5B | Cherry® Offset Lockbolt Pulling Heads ( Type: Basic Pulling Short Pintail )( Lockbolt Diameter: 5/32" ) | 1 | |
H563SP-6B | Cherry® Offset Lockbolt Pulling Heads ( Type: Basic Pulling Short Pintail )( Lockbolt Diameter: 3/16" ) | 1 | |
H700-122 | WHEEL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H700-200 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H781A-456 | CherryMAX® Offset Pulling Heads ( Installs: 1/8", 5/32" & 3/16" Nominal & Oversize CherryMAX R ) | 5 | |
H800-122 | WHEEL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H800-200 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H856-6MB | Cherry® Maxibolt Pulling Heads ( Head Style: Offset )( Maxibolt Diameters: 3/16" ) | 1 | |
H900-122 | WHEEL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H900-200 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | 1 | |
HAR-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HBD-400 | BLADE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HBD-410 | BLADE COVERS, cold weather type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HBD-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HEL-110 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HJET-212 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-20-4 | Drive Sets For Hi-Shear® ( Cupping Size: 1/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-20-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-20-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-20-8 | Drive Sets For Hi-Shear® ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-21-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-21-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-22-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-22-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-40-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-40-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-40-8 | Drive Sets For Hi-Shear® ( Cupping Size: 1/4" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-41-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-41-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-42-5 | Drive Sets For Hi-Shear® ( Cupping Size: 5/32" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-42-6 | Drive Sets For Hi-Shear® ( Cupping Size: 3/16" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-60-10 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-60-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-61-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-62-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .401" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-80-10 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 5/16" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-80-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 3-1/2" (89 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-81-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 5-1/2" (140 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS 07-82-12 | Bell Type Drive Sets For Hi-Shear® ( Cupping Size: 3/8" )( Overall Length: 7-1/2" (191 Mm) )( Shank: .498" )( Type: Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-10B | Huck/Hi-Shear® Collar Removers Hand Type ( Roller Diameter: 5/16" )( Stock Hex: 3/4" )( A' - 'b' - 'c' Dimension: .321" - 7/8" - .206" )( Overall Length: 7" (178 Mm) )( Type: 10° Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-12B | Huck/Hi-Shear® Collar Removers Hand Type ( Roller Diameter: 3/8" )( Stock Hex: 3/4" )( A' - 'b' - 'c' Dimension: .384" - 7/8" - .248" )( Overall Length: 7" (178 Mm) )( Type: 10° Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-401B-10 | Huck/Hi-Shear® Collar Removers ( Collet: 5/16" )( Opening (+.001 - .000): .312" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-401B-12 | Huck/Hi-Shear® Collar Removers ( Collet: 3/8" )( Opening (+.001 - .000): .375" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 3/16" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-401B-5 | Huck/Hi-Shear® Collar Removers ( Collet: 5/32" )( Opening (+.001 - .000): .156" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 1/2" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-401B-6 | Huck/Hi-Shear® Collar Removers ( Collet: 3/16" )( Opening (+.001 - .000): .187" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-401B-7 | Huck/Hi-Shear® Collar Removers ( Collet: 7/32" )( Opening (+.001 - .000): .218" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-401B-9 | Huck/Hi-Shear® Collar Removers ( Collet: 9/32" )( Opening (+.001 - .000): .281" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .401 Shank ) | 1 | |
HSC 07-498B-10 | Huck/Hi-Shear® Collar Removers ( Collet: 5/16" )( Opening (+.001 - .000): .312" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .498 Shank ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-498B-12 | Huck/Hi-Shear® Collar Removers ( Collet: 3/8" )( Opening (+.001 - .000): .375" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 3/16" )( Type: 10° Offset .498 Shank ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-498B-5 | Huck/Hi-Shear® Collar Removers ( Collet: 5/32" )( Opening (+.001 - .000): .156" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 1/2" )( Type: 10° Offset .498 Shank ) | 1 | |
HSC 07-498B-6 | Huck/Hi-Shear® Collar Removers ( Collet: 3/16" )( Opening (+.001 - .000): .187" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .498 Shank ) | 1 | |
HSC 07-498B-7 | Huck/Hi-Shear® Collar Removers ( Collet: 7/32" )( Opening (+.001 - .000): .218" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .498 Shank ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-498B-9 | Huck/Hi-Shear® Collar Removers ( Collet: 9/32" )( Opening (+.001 - .000): .281" )( Overall Length: 5-1/2" (140 Mm) )( Tool Diameter: 5/8" )( Type: 10° Offset .498 Shank ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-4B | Huck/Hi-Shear® Collar Removers Hand Type ( Roller Diameter: 1/8" )( Stock Hex: 1/2" )( A' - 'b' - 'c' Dimension: .136" - 9/16" - .083" )( Overall Length: 5-1/2" (140 Mm) )( Type: 10° Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-5B | Huck/Hi-Shear® Collar Removers Hand Type ( Roller Diameter: 5/32" )( Stock Hex: 1/2" )( A' - 'b' - 'c' Dimension: .167" - 9/16" - .104" )( Overall Length: 5-1/2" (140 Mm) )( Type: 10° Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSC 07-6B | HUCK/HI-SHEAR® COLLAR REMOVERS HAND TYPE ( ROLLER DIAMETER: 3/16" )( STOCK HEX: 5/8" )( A' - 'B' - 'C' DIMENSION: .199" - 11/16" - .125" )( OVERALL LENGTH: 6-1/2" (165 MM) )( TYPE: 10° OFFSET ) | 1 | |
HSC 07-8B | Huck/Hi-Shear® Collar Removers Hand Type ( Roller Diameter: 1/4" )( Stock Hex: 3/4" )( A' - 'b' - 'c' Dimension: .259" - 13/16" - .165" )( Overall Length: 7" (178 Mm) )( Type: 10° Offset ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HSF-110 | WING ROOT INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU16-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU16-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HUT500 | 3/32IN OFFSET 6IN PSA PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HUT600 | 3/16IN OFFSET 6IN PSA PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAC-010 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAC-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1F10305 | Stud, Support (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1F10306 | Stud, Support Long (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1F10320 | Stud Support, Long (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ITCDRF-KITB5 | C3 ADAPTOR DENSO - SET OF 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J200-110 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J200-111 | ENGINE INLET PLUGS, 430D models (set of 4) | 7 | |
J200-210 | WING COVERS, 230SP, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J200-215 | WING COVERS, 230SP, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J250-110 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J47200 | Holding block for the check of buckling on the half-wheels, set of 3 EA | 9 | |
JHW8818AW | OFFSET STRIKIN WR 3 3/8 85MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JHW8818W | OFFSET STRIKING WR 3-1/2 89MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JHW8819BW | OFFSET STRIKIN WR 3 3/4 95MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JHW8819W | OFFSET STRIKIN WR 3 7/8 98MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JISB-4430 HSS-G -UNF1/4 X 28 | HAND TAP SET OF 3 PIECES JIS B-4430 HSS-G - UNF 1/4 X 28 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JISB-4430 HSS-G-UNF 5/16 X 24 | HAND TAP SET OF 3 PIECES JIS B-4430 HSS-G - UNF 5/16 X 24 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JMPCF34D6553 | SET OF TWO WASHING NOZZLES CF34-8C/E | 4 | |
JRC109 | WRENCH-BOX 5/16x3/8 OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JRC3010 | 3/8 DHX OFFSET TORQ ADPT 3/8DD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JST-115 | ENGINE INLET PLUGS (Rotax 914) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K20009-1 | RIG PIN SET QTY OF 12 K2009-2,-3,-4 B787 | 3 | |
K21028-25 | OFF SET WRENCH, 3/8 INCH, 12 POINT BOX HEAD | 4 | |
K2309-01FH | NO12 3/8 SPLM OFFSET TQ ADPTR | 1 | |
K3317 | 11/16 3/4 DBL HX OFFSET WRCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K52002-133 | BARRIER - PASSENGER ENTRY DOORS SET OF K52002-134, K852002-135) | 5 | |
KC10-100 | INTAKE COVERS for 1, 2 & 3 engines (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC10-110 | EXHAUST/BYPASS VENT PLUGS SET for 1, 2 & 3 engines (set of 12) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-163 | STORAGE BAG, HEAVY DUTY for TF-33 Intake Covers (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-170 | INTAKE COVERS, soft type, TF-33 engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-175 | EXHAUST COVER SET, TF-33 engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-180 | INTAKE PLUGS, TF-33 engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-185 | INTAKE/EXHAUST COVER SET, soft type, TF-33 engines (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-200 | NOSE GEAR TIRE COVERS, 39261D0311001-1 NLG Single Wheel Cover (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-201 | MAIN GEAR TIRE COVERS, separate for each tire, 39261D0311003-1 C/KC-135 MLG Single Wheel Cover (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-202 | MAIN GEAR TIRE COVERS, single cover per tire set, 39261D0311005-1 C/KC-135 MLG One Piece Cover (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-207 | BYPASS VENT & TURBINE EXHAUST PLUGS, TF-33 engines (set of 12) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KC135-251 | FWD CHEEK FAIRING LCS SCOOP PLUG (RC135-251), Left & Right Side (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KDK-100 | ENGINE INLET PLUGS, K100 Series (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KDK-205 | PITOT COVERS w/telescoping handles (for amphib's) (set of 3) | 1 | |
KPC3-480-325 | COVER, PITOT PROBE,(SET OF 3) | 19 | |
KRBC13-39 | CASTER SET OF 4 KRBC13 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KRBC7TE-4 | Lng Tr Drwr1/Drwr2 SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L1011-100 | INTAKE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L1011-110 | INTAKE PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L1011-200 | EXHAUST PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L109-200 | EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L16-106 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L17-100 | ENGINE INLET PLUGS, not shark mouth type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L17-103 | ENGINE INLET PLUGS, B-model (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L18-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L18-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L235-101 | ENGINE & CARB INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L2K-010 | COMPLETE COVER, W/ DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L30-057 | PITOT COVER/AOA STRAP & TAT COVER (RVSM, NEWER LARGER STYLE), heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L30-300 | WING COVERS (35-A) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L30-301 | WING COVERS (35) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L30-302 | WING COVERS (31) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L300-110 | ENGINE INLET PLUGS, 300 & 350 models (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L320-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L39-600 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L45-201 | DORSAL, ACM, & FUEL VENT INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L50-058 | PITOT COVER/AOA STRAP & TAT COVER heat resistant type (set of 3) | 1 | |
L50-175 | DORSAL PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L500-101 | INTAKE/EXHAUST COVERS, 3-strap type (set of 4) | 1 | |
L500-210 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L500-375 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L60-059 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L60-060 | PITOT COVERS w/AOA STRAP, heat resistant type (set of 3) | 1 | |
L600-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L70-059 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L70-060 | PITOT COVERS w/AOA STRAP, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L8A-101 | ENGINE INLET PLUGS, LSA-8 model (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LAC-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LAC-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LEG-050 | COMPLETE COVER w/detachable Wing Covers (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LGP06-206G-25OS | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3701 ) | 1 | |
LGP08-206G-25OS | HUCK NOSE ASSEMBLIES / PULLING HEADS - OFFSET ( PILOT DIAMETER: 99-3702 ) | 1 | |
LIV-101 | ENGINE INLET PLUGS (turboprop models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LP3-100 | MAIN ENGINE INLET PLUGS, NSN 1730-01-554-0658 "COVER,AIRCRAFT GROUND SERVICING" (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LP3-110 | OIL COOLER INLET PLUGS, NSN 1730-01-554-0659 "COVER,AIRCRAFT GROUND SERVICING", NATO STOCK NUMBER: 1730-20-A0Y-8488 (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LP3-111 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-525-0002 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LP3-140 | UPPER NACELLE PLUGS (5th stage duct, 2 tailpipe cooling ducts) (NSN: 1730-01-523-3157) (set of 12) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LPV-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LPV-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LTA1214 | WRENCH, OPEN END, LOW-TORQUE SLIMLINE, 15° OFFSETS, 3/8"-7/16" | 2 | |
LTA2426 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 3/4"-13/16" | 1 | |
LTA2428 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 3/4"-7/8" | 1 | |
LTA812 | 2 PC SAE 15° OFFSET LOW TORQUE SLIMLINE OPEN-END WRENCH SET (3/8-1-7 /8 ") | 2 | |
M135-101 | INTAKE/EXHAUST COVERS, 3-strap type (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M190-100 | INTAKE COVERS, OEM PN: AGE-03768-401 (set of 2) | 1 | |
M190-300 | APU COVER & PLUG SET (APU Inlet, Exhaust, and Heat Exchanger) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-101 | ENGINE INLET PLUGS (231, M20K) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-104 | FRESH AIR VENT PLUGS (201, 231 MODELS) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-106 | FRESH AIR VENT PLUGS (for 252 MODELS ONLY) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-108 | ENGINE INLET PLUGS (MISSILE CONVERSION) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-220 | WING COVERS (201, 205, 231, MSE models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-225 | WING COVERS (201, 205, 231, MSE models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-270 | WING COVERS (201, 205, 231 models), hail protection type, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M201-271 | WING COVERS (201, 205, 231 models), hail protection type, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M22-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M312-150 | PROP TIE DOWN/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M314-150 | PROP TIE DOWN/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M47E-910 | CABIN HEATSHIELD SET, NSN: 1730-17-922-6259 (set of 10) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M47E-GR1 | DESERT KIT, includes p/n's: -010, -100, -110, -200, -210, -220, -230, -240, -300, -310, -320, -330, -400, -500, -510, -900, -910 (set of 17) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M47G-GR1 | DESERT KIT, includes p/n's: -010, -100, -110, -200, -210, -220, -230, -240, -300, -310, -320, -330, -400, -500, -510, -900, -910 (set of 11) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MA75200 | Klenk® Offset Snips ( Cut: Left )( Cut Length: 1-3/8" (35 Mm) )( Overall Length: 10-1/2" (267 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MA75210 | Klenk® Offset Snips ( Cut: Right )( Cut Length: 1-3/8" (35 Mm) )( Overall Length: 10-1/2" (267 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MALS11 | 3 1/2IN OFFSET SEEMER TONGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MALSG11 | 3 1/2IN OFFSET SEEMER TONGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-107 | ENGINE INLET PLUGS (small third inlet, approx. 3 x 6) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-108 | ENGINE INLET PLUGS (large third inlet, approx. 5 x 7) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-230 | WING COVERS, w/wind deflectors (M7-235B), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-235 | WING COVERS, w/wind deflectors (M7-235B), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-240 | WING COVERS (M7-235B), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-245 | WING COVERS (M7-235B), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-913 | HEATSHIELD SET (M5-235C w/patroller doors & skylight) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MCR-080 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (specify model) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MCR-085 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS, (4S or Pickup model, please specify) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MD11-100 | INTAKE COVERS, specify engine type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MD11-101 | INTAKE PLUGS, GE CF6 engine (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MD11-102 | INTAKE PLUGS, PW engines (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MD11-105 | INTAKE COVERS, PW engines (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MD11-120 | PITOT COVERS, heat resistant type (all connected) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEAG-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MER-110 | INSULATED ENGINE COVERS, M3B (C-26A, C-26B) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MER-400 | WING & CENTER SECTION COVERS, M3B (C-26A, C-26B) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MER-600 | HORIZONTAL STABILIZER COVERS, M3B (C-26A, C-26B) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MER-930 | CABIN HEATSHIELDS, lg windows, M3B (C-26A, C-26B) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MGP-300 | BLADE TIE-DOWNS (fabric type) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MI17-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MI17-105 | ENGINE INLET COVERS & Doghouse Inlet plug, for Inlet Baffle (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIN7 | Plastic Foil Set - consists of 7 sheets of foil, 100µm - 300µm in thickness (0.003937 - 0.01181 ) and a size of 30 mm x 50 mm (1.18 in x 1.97 in) | 2 | |
MOVA-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MOVA-108 | ENGINE NACA PLUGS (X2 PILOT SIDE, X1 CO-PILOT SIDE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MPS31C | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES. | 6 | |
MPS34C | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES | 3 | |
MPS45 | TEST SET - AIR DATA (RVSM COMPLIANT). REPLACES AEROFLEX-JCAIR P/N 01-1046-00 (MODEL MPS-27) AND P/N 01-1047-00 (MODEL MPS-31B) WHICH ARE NO LONGER MANUFACTURED. CONTAINS INTERNAL VACUUM AND PRESSURE SOURCES. | 4 | |
MTLS-101 | ENGINE INLET PLUGS (PORSCHE ENGINE) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MTTL430 | BACK PROBE SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MU2-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MU2-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MU2-901 | HEATSHIELD SET (Long Fuselage) (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N/A | SET OF QUICK DISCONNECT COUPLINGS FOR B737 | 5 | |
NASM21250-05016 | SET OF BOLTS FOR JACKPAD CS-295-RC104 (ALTERNATE TO: 35-92281-0001) | 1 | |
NDT1039-T1/T2 | BOEING REFERENCE STANDARD NDT1039-T1/T2 X 1SET OF 5 PIECES | 2 | |
NDT3267-T1/T2 | BOEING REFERENCE STANDARD NDT3267-T1/T2 X 1SET OF 4 PIECES | 1 | |
NRK-3AST | GAGE SET NSN 5280-01-352-1336, CONSIST OF 7075T6, 4340 & 6AL4V STANDARDS | 1 | |
NRM-102 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OBS-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OBS-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OEXR12 | 0 OFFSET RACHET BOX WRENCH 3/8"X7/16" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OFFSET-SPANNER | 13/16 OFFSET SPANNER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OV1-200 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OV1-205 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OV10-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OV10-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OXR12A | 3/8 0 OFFSET RAT COMBO WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OXR24A | 3/4 0 OFFSET RAT COMBO WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OXR26A | 13/16IN 0 OFFSET RAT COMBO WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P3-100 | ENGINE & SIDE COWLING PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31C-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31C-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31C-HP1A | PITOT COVERS w/ "WARNING: NOSEGEAR LOCKED, DO NOT MOVE" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31C-HPNA | PITOT COVERS, heat resistant type w/ "WARNING: NOSEGEAR LOCKED, DO NOT MOVE" flag (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31T-135 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31T-137 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P31T-200 | PITOT COVERS W/ AOA COVER, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P38-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P38-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P40-150 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P46P-710 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P46T-180 | LANDING GEAR/GEARWELL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P46T-HPM | PITOT COVERS, heat resistant type, M600 M350 MODELS ONLY (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P601-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P601-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P601-902 | COCKPIT HEATSHIELDS w/o skylights (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P68B-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P68B-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P68C-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P68C-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P6900-L | Compound Action Offset Snips ( Cut Length: 1-3/4" (45 Mm) )( Overall Length: 10-7/8" (276 Mm) )( Type: Left ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P6900-R | Compound Action Offset Snips ( Cut Length: 1-3/4" (45 Mm) )( Overall Length: 10-7/8" (276 Mm) )( Type: Right ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA11-115 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA12-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA18-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA20-115 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA20-122 | TIRE COVERS (no wheelpant faring) TRIPACER (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-101 | ENGINE INLET PLUGS (Lo Presti Speed Mod) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-166 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-505 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-915 | HEATSHIELD SET (3 side windows, original windshield, one or two-piece) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-916 | HEATSHIELD SET (3 side windows, longer Knots-2-U windshield) (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA25-110 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA28-166 | TIRE COVERS, aircraft without wheelpants (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA28-920 | HEATSHIELD SET (235 Charger/Challenger, smaller entry door window) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA30-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA30-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA30-500 | LANDING GEAR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31-320 | HORIZONTAL STABILIZER COVERS (310 models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31-325 | HORIZONTAL STABILIZER COVERS (310 models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31P-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA31P-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-100 | ENGINE INLET PLUGS (CHEROKEE 6-300, LANCE & SARATOGA-301: NORM. ASPIRATED) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-135 | ENGINE INLET PLUGS (TurboPlus Lance/Saratoga Mod SA2935NM) (set of 5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-136 | ENGINE INLET PLUGS (LoPresti Mod, Circular Inlets) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-210 | WING COVERS (Saratoga 301 Models), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-215 | WING COVERS (Saratoga 301 Models), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-370 | TIRE COVERS, aircraft without wheelpants (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA32-917 | HEATSHIELD SET (Early -260 & -300 models) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA34-310 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA34-315 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA34-911 | COCKPIT HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA34-912 | COCKPIT HEATSHIELD SET (Seneca IV & V, 1 piece windshield) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA34-913 | HEATSHIELD SET (72-73 models) (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA38-101 | ENGINE INLET PLUGS, includes carb. inlet plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA42-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA42-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA44-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA44-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA46-HPM | PITOT COVERS, heat resistant type, M350 MODELS ONLY (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PAN-050 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PAN-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PBY-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PBY-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC12-KIT1 | Kit 1: Plugs & Pitot Covers- Red-Gear Basics (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC12-KIT2 | Kit 2: Travel Necessities- Business Traveler (set of 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC12-KIT3 | Kit 3: Cold Weather Op's.- Into Known Icing (set of 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC21-110 | SMALL PLUGS SET (Oil Cooler, Gen Air, ACS RAM inlets) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC24-115 | ENGINE COVERS, 3-strap type (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC24-200 | PITOT COVER SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC24-210 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC6-110 | PROP TIE-DOWN/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC7-100 | ENGINE PLUGS (standard design: Main Inlet & 3 smaller wedge plugs) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PC9-150 | PROP TIE DOWN/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PH1-212 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PH3-115 | INTAKE/EXHAUST COVERS, 3-strap type (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PH3-210 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PH3-215 | "REMOVE BEFORE FLIGHT" STREAMERS (22" LONG) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PHG21B | OFFSET BUSH SPLTTR 8-3 8IN LNG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PHG21B1 | OFFSET BUSH SPLTTR 8-3 8IN LNG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PIK-201 | WING COVERS, PIK 30, all year use (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PIK-401 | EMPENNAGE COVER, PIK 30, incl. horiz. stab., all year use (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PITOT-COVER-A300 | A300 PITOT COVER(SET OF 3)TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PITOT-COVER-A320 | PITOT COVER(SET OF 3) TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PITOT-COVER-A330 | A330 PITOT COVER(FIT IN SET OF 3)TOO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PM31761 | 3OFF DOCKING HEADSET EXT. LEADS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
POWER CABLES | 4 SETS OF POWER CABLES 3M LONG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PRE-130 | INTAKE/EXHAUST COVERS, 3-strap type, no banding (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PRE-370 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSP-600 | TIRE COVERS, no wheelpants (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PTH-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PTH-400 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PTH-405 | EMPENNAGE COVER (Tailboom, Vertical & Horiz Stabilizers) SET (w/Horiz. Stab. Cover), 2003 & prior: smaller rudder, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32396-200 | SCREW (SET OF 3 PIECES) | 8 | |
PWC40671 | Support Pad (Set of 3 pieces) | 1 | |
PWC40672 | SUPPORT PAD (SET OF 3 PIECES) | 3 | |
PWC40995 | ALIGNMENT PIN (set of 3 pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC50502-2 | BALL PLUNGER (SET OF 3) | 1 | |
PWC55364 | RACE (SET OF 13) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC56398 | MASTER BLADE (SET OF 3 PIECES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC60225 | Drift set of 3 pieces | 1 | |
PWC64645-100 | RIVETER ASSEMBLY (SET OF 3 PIECES) | 2 | |
PWC64645-200 | Riveter Assembly (set of 3 pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC64645-300 | Riveter Assembly (set of 3 pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC64645-400 | Riveter Assembly (set of 3 pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC64645-500 | Riveter Assembly (set of 3 pieces) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC72589 | LM TOOL KIT SET OF 23 PIECES | 2 | |
Q400-510 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QC3ALC | QC ADPTRS -Set of 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QJXB24A | BOX END 10 OFFSET J 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QJXBM13A | BOX END 10 OFFSET J 13MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QJXD12A | BOX END 0 OFFSET J 3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QJXD24A | BOX END 0 OFFSET J 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QXH440-4.5ZF | 1-3/8 12PT OFFSET TQ/AD 1/2DR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QXXB44A | BOX END 10 OFFSET X 1-3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QYXB24A | BOX END 10 OFFSET Y 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
QYXD24A | BOX END 0 OFFSET Y 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R-2426 | 3/4 -13/16 SNAP-ON OFFSET RATCHETING BOX WRENCH | 1 | |
R1011C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-11/32", 12-POINT | 3 | |
R1012C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-3/8", 12-POINT | 1 | |
R1214C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 4 | |
R22-620 | TAIL FIN COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R22-621 | TAIL FIN COVERS w/hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R2428C | WRENCH, BOX, RATCHETING, 0° OFFSET, 12-POINT, 3/4"-7/8" (DOGBONE) | 2 | |
R3K-100 | ENGINE INLET PLUGS, w/carb inlet plug (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R44-710 | HORIZONTAL & VERTICAL STABILIZER COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R44-715 | HORIZONTAL & VERTICAL STABILIZER COVERS, hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R66-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R66-620 | HORIZONTAL & VERTICAL STABILIZER COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R66-625 | HORIZONTAL & VERTICAL STABILIZER COVERS, hail protection (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R700-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R700-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RADIUS PROBE | RADIUS PROBE SET OF 0.030, 0.020, 0.015 AND 0.005 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RAV-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RB T101586 | Pusher Set Of 3 | 1 | |
RB T101586P | PUSHER SET OF 3 | 1 | |
RB T103222-101 | JACK SCREW SET SET OF 3 | 1 | |
RBT18561-37 | Offset 3/8 Torque Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBZ1214 | RATCHETING BOX 3/8 X 7/16; BLUE POINT ® LATCH ON HEAD TM ZERO DEGREE OFFSET | 3 | |
RBZ605 | SET, WRENCH, RATCHETING BOX, LATCH-ON®, 0° OFFSET, 1/4"-5/16" TO 3/4"-7/8" (5 PCS.) | 3 | |
RD-300 | AEROFLEX RD-300 RADAR TEST SET | 3 | |
RD-301A | AEROFLEX RD-300 RADAR TEST SET | 2 | |
RD300 | VIAVI/AEROFLEX RD-300 WEATHER RADAR TEST SET | 3 | |
REV-010 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
REV-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RG3-505 | WHEELPANT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ROB-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RQ4-100 | INTAKE COVER, includes generator inlet plug, NSN 1680-01-603-0981 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RQ4-305 | PITOT COVERS, with installation tool, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RQ4-350 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RS20-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSE1098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 20 | |
RSE1098 REV B | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSKOF-FL | Rivet Set Kit 3 Piece Long Flush - Offset - MADE IN THE USA! | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSN-3AST | Gage Set NSN 5280-01-352-1336, Consist of 7075T6, 4340 & 6AL4V Standards | 1 | |
RV10-100 | ENGINE INLET PLUGS, Standard Cowling (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV10-ART | ENGINE INLET PLUGS, with Aerotherm Heater Cut-Outs (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV12-100 | ENGINE INLET PLUGS (original cowl only) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV12-600 | TIRE COVERS, no wheelpants (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV14-100 | ENGINE INLET PLUGS, Sam James Cowl (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV14-102 | ENGINE INLET PLUGS, includes auxiliary intake plug on right side (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV3-010 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV3-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV4-010 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV4-101 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV4-105 | ENGINE INLET PLUGS, Sam James Cowling (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV6-002 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (RV6/RV6A models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV6-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV6-101 | ENGINE INLET PLUGS, Sam James Cowling (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV6-510 | WHEELPANT COVERS (for tricycle) (set of 3) | 1 | |
RV7-004 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (RV7/RV7A models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV7-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV7-101 | ENGINE INLET PLUGS, Sam James Cowling (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV8-002 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV8-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV8-102 | ENGINE INLET PLUGS, Sam James Cowl (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV9-002 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV9-003 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS, w/ hail protection on wing covers & horiz. stabilizers (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV9-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RV9-101 | ENGINE INLET PLUGS, Sam James Cowling (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RYA1011 | 5/16-11/32" OFFSET" | 3 | |
RYA1214 | 3/8–7/16" 12-POINT SAE 25° OFFSET RATCHETING BOX WRENCH | 4 | |
RYA2428 | OFFSET BOX RATCHETING 3/4" X 7/8" | 1 | |
S205-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S260-100 | ENGINE INLET PLUGS, inc. Carb Inlet (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S300-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S300-150 | PROP TIE/EXHAUST COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S340-800 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S51-145 | PROP TIE-DOWN/EXHAUST COVER (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S550-375 | LANDING GEAR/GEAR DOOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S76-104 | EXHAUST PLUGS (S76A and S76C models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S76-111 | PITOT COVERS (D Models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S76-112 | PITOT COVERS (D Models), heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S92-140 | PITOT COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S92-141 | PITOT COVERS, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S92-142 | PITOT COVERS (Covers Stand-Off) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S92-143 | PITOT COVERS, heat resistant type (Covers Stand-Off) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S92-310 | WHEEL COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAB-120 | ENGINE COVERS (WITH TR'S), Sabre 65 (Garrett 731 Engines)(CT-39) w/plugs (set of 6) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAB-920 | COCKPIT HEATSHIELD SET, Sabre 65 (Garrett 731 Engines)(CT-39) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAB-930 | COCKPIT HEATSHIELD SET (SEPARATE PIECES), Sabre 65 (Garrett 731 Engines)(CT-39) (set of 10) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAV-150 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SB06-204D-27OS | GAGE BILT NOSE ASSY HUCK GUN OFFSET 3/16" | 2 | |
SB06-204D270S | HEAD OFF SET (BACB30VX6P04U) | 2 | |
SCREWDRIVERS OFFSET SD PH3 X PH4 | SCREWDRIVERS OFFSET SD PH3 X PH4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGDE70ESD | PLASTIC WATCHMAKER SET OF 03 (STAHLWILLE CERAMIC ANTISTATIC) | 1 | |
SGDTX130BFR | 13 PC TORX® INSTINCT® SOFT GRIP COMBINATION SCREWDRIVER FOAM SET (RED) | 1 | |
SGDX80BR | SCREWDRIVER SET (8PCS) SOFT GRIP RED HANDLE 5PCS FLAT TIP & 3PCS | 3 | |
SGS-210 | WING COVERS, 1-34/35 Models, all year use (15m wingspan) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGS-220 | WING COVERS, 1-36 Models, all year use (14.1m wingspan) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGS-230 | WING COVERS, 2-22 E Models, all year use (13.1m wingspan) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGS-240 | WING COVERS, 2-32, all year use (17.3m wingspan) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGS-250 | WING COVERS, 2-33A, all year use (15.5m wingspan) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SHB-150 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SHB-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SHW-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SJ30-201 | PITOT COVER SET, heat resistant type (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM130-4703 | 3/32" Double Offset Rivet Set - MADE IN THE USA! | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM130-4705 | DOUBLE OFFSET RIVET SET 5/32 | 1 | |
SM130-4706 | 3/16" Double Offset Rivet Set - MADE IN THE USA! | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM20-4763 | RIVET OFFSET 3/32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM21-4706 | RIVET SET OFFSET 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM40-4705 | 5/32" Cupped Rivet Set, .498 Shank, 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM40-4706 | 3/16" Cupped Rivet Set, .498 Shank, 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM40-4708 | 1/4" Cupped Rivet Set, .498 Shank, 3-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM41-4705 | 5/32" Cupped Rivet Set, .498 Shank, 5-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM41-4706 | 3/16" Cupped Rivet Set, .498 Shank, 5-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SM81-47012 | 3/8" Cupped Rivet Set, .498 Shank, 5-1/2" Offset | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SNX-050 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SOR-115 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SOXR12A | 3/8 0 OFFSET RATCOMBO FDP WRN | 1 | |
SOXR24A | 3/4 0 OFFSET RATCOMBO FDP WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SOXR26A | 13/16 0 OFFSET RATCOMBO FDP WR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SOXRM13A | 13MM 0 OFFSET RATCOMBO FDP WRN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SP63527 | VANE ROTOR SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SP65801 | VANE SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPC-600 | TIRE COVERS, no wheelpants (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10485 | WRENCH - CROWFOOT, OFFSET OPEN-END (7/8 INCH X 3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR20-105 | ENGINE INLET PLUGS, G2, GTS, G3 models and up (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR20-210 | WING COVERS, G3 model, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR20-215 | WING COVERS, G3 model, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR20-230 | WING COVERS, G3 model, w/ Hail Protection, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR20-235 | WING COVERS, G3 model, w/ Hail Protection, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-102 | SIDE COWL NACA PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-220 | WING COVERS, G3 model, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-225 | WING COVERS, G3 model, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-250 | WING COVERS w/Hail Protection, G3 model, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-255 | WING COVERS w/Hail Protection, G3 model, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-275 | WINGTIP PADS, G3 & GTS models (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SR22-350 | HORIZONTAL STABILIZER TIP PADS, G3 & GTS models (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SSX23P145 | RUBBER TOOL DOG TOYS-SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST1112MB-R401-5-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 5/32" )( Type: Offset ) | 1 | |
ST1112MB-R401-6-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 3/16" )( Type: Offset ) | 1 | |
ST1112MB-R401-7-3 | Boeing® BACR15FT Mod. Universal Cutaway Rivet Sets ( Rivet Size: 7/32" )( Type: Offset ) | 1 | |
ST2580-190 | Wrench 3 1/2 hex crowsfoot offset | 1 | |
ST2580-469-2-12-20-B | OFF SET WRENCH, 3/8 INCH, 12 POINT BOX HEAD | 2 | |
ST878D | KIT - PRESET TUBE FITTING, "SLEEVE SET", FOR PRESETTING BACS13AP FLARELESS TUBE FITTING (NOT FOR TITANIUM TUBING) (SET OF 25 EA. DIES, MANDRELS, & CLAMPS) | 9 | |
ST926E | SET OF (33) SWAGING TOOLS | 3 | |
STAHLWILLE 10551 | 3/4 PHILIPS OFFSET SCREWDRIVER | 1 | |
STAOM751315 | 9OT 75 DEG OFFSET WR. 13-15MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-6422 | SET OF 3EA JACKSCREWS - 1/4X28 UNF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Stackable Standard | Set of 4 standards, 2024T3 Plates, 0.040", 0.063", 0.068", 0.071", 0.100" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T009753 | 3/5 FLAP TORQ TUBE MEA (SET OF 2) | 1 | |
T101308 | SET OF 3 SCREWS | 3 | |
T101338 | SCREW (SET OF 3) | 1 | |
T101586 | PUSHER SET OF 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103222-101 | JACK SCREW SET SET OF 3 | 1 | |
T18-005 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T34-100 | ENGINE INLET PLUGS (T34A/T34B) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T34-105 | ENGINE INLET PLUGS, turboprop model (T34C) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T34-175 | PROP TIE-DOWN/EXHAUST COVERS, turboprop model (T34C) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T51-020 | COMPLETE FUSELAGE COVER w/DETACHABLE WING COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T67-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TBM-100 | ENGINE INLET PLUGS, Main & Side NACA Inlets, TBM 700/850 (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TBM-105 | ENGINE INLET PLUGS, Main & Side NACA Inlets, TBM 900/930 (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TBM-131 | ENGINE COVER (with prop tie-downs) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TBM-133 | INSULATED ENGINE COVER (with prop tie-downs) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCX-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TCX-102 | ENGINE INLET PLUGS TDI Model (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TD154H3-11 | LONG OFF,SET STUMP 5/32 (RIVET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEX-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
THR-100 | PROP TIE-DOWN/EXHAUST COVERS (turbine engine models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TM1711G001 | SET OF GUIDE - 72-00-43-200-805 | 1 | |
TM1726G001 | GUIDE (SET OF 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TORX SET | SET OF 32 HOLLOW TORX BITS TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TRA-100 | PROP TIE-DOWN/EXHAUST COVERS (turbine engine models) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TRA-117 | INTAKE PLUG with OIL COOLER SCOOP PLUGS, connected w/ lanyard (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TRI-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U21-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U21-155 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U21-156 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U21-400 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-111 | HORIZONTAL STABILIZER COVERS, Padded, NSN: 1730-01-589-8417 (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-120 | HORIZONTAL STABILIZER TIP PADS & CENTER SECTION PAD (specify stabilator shape & chord) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-515 | CMWS CHAFF/FLARE DISPENSOR COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-700 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-721 | NOSE IR SIGHT and TAILMOUNT IR SIGHT COVERS, blackout type w/ Remove Before Flight Streamers (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-745 | GUN COVER, GAU-18 .50 CAL, w/ammo belt covers (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-750 | GUN COVER, GAU-1, GAU-2, w/ammo belt covers (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UH60-900 | WINDSHIELD HEATSHIELDS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
VEL-110 | ENGINE OUTFLOW PLUGS (Model 173) (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
VL3-105 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
VNK-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WIL-500 | TIRE COVERS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WRENCH SET, RATCHETING BOX, 0° OFFSET, 12-POINT (4 PCS.) (3/8" TO 7/8") | WRENCH SET, RATCHETING BOX, 0° OFFSET, 12-POINT (4 PCS.) (3/8" TO 7/8") | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WT9-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WT9-101 | ENGINE AREA WEDGE PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
XB1214A | WRENCH BOX OFFSET STANDARD 3/8"X7/16" | 1 | |
XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
XB2226 | BOXOCKET 10 OFFSET 11/16-13/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
XB2830A | 3/4X7/8 OFFSET SPANNER WRENCH | 1 | |
XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
XBM1415A | WRENCH BOX OFFSET STANDARD METRIC 13X15MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
XDES79A | 7/32–9/32" HEX, SAE SPLINE STANDARD HANDLE 15° OFFSET BOX WRENCH | 2 | |
XDH1214A | 3/8?7/16" 15° OFFSET BOX WRENCH | 2 | |
XDH2024A | 3/4X5/8 TORX OFFSET SPANNER | 1 | |
XDH2224A | 11/16?3/4" 15° OFFSET BOX WRENCH | 1 | |
XDH2226A | WRENCH HI-PERFORMANCE 15° OFFSET 11/16"-13/16" | 1 | |
XDH78A | 1/4X7/32 TORX OFFSET SPANNER | 2 | |
XDHF 605 | SNAP-ON - SET, WRENCH, HI-PERFORMANCE, BOX, 0 DEG. OFFSET, 12-POINT, 5 PCS. (1/4 IN. TO 13/16 IN.) | 2 | |
XID1213A | 3/16 X 13/64 OFFSET SPANNER 12 POINT | 1 | |
XID1415A | WRENCH, BOX, 10° OFFSET, MIDGET, 12-POINT, 7/32"- 15/64" | 1 | |
XID1618A | 1/4 X 9/32 OFFSET SPANNER 12 POINT | 1 | |
XID2022A | WRENCH, BOX, MIDGET, 10° OFFSET, 5/16"-11/32", 12-POINT | 1 | |
XID604KA | Set, Wrench, Box, Midget, 10° Offset, 12-Point (4 pcs.) (3/16"-13/64" to 5/16"-11/32") | 2 | |
XL2-910 | HEATSHIELD SET (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
XO1012 | 5/16?3/8" DEEP 60° OFFSET BOX WRENCH | 1 | |
XO1214 | 3/8-7/16", 12 POINT DEEP 60 OFFSET WRENCH | 1 | |
XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
XO2226 | 11/16" X 13/16" OFF SET RING SPANNER | 1 | |
XO2428 | 3/4" X 7/8" OFF SET RING SPANNER | 1 | |
XO605 | SET, WRENCH, BOX, 60 DEEP OFFSET, 12-POINT (5PCS) (3/8" TO 7/8) | 1 | |
XS1012A | WRENCH, BOX, SHORT, 10° OFFSET, 5/16"-3/8", 12-POINT | 2 | |
XS1214A | WRENCH, BOX, SHORT, 10° OFFSET, 3/8"-7/16", 12-POINT | 3 | |
XS2024A | WRENCH, BOX, SHORT, 10° OFFSET, 5/8"-3/4", 12-POINT | 1 | |
XS2226A | WRENCH, BOX, SHORT, 10° OFFSET, 11/16"-13/16", 12-POINT | 1 | |
XS67A | WRENCH, BOX, SHORT, 10° OFFSET, 3/16"-7/32", 12-POINT | 1 | |
XSO1012 | DEEP 60 OFFSET 5/16 3/8 WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
XSO1214A | WRENCH, BOX, SHORT, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
XSO2024A | SHORT HANDLE, DEEP 60 DEG OFFSET INCHES 5/8-3/4 | 1 | |
XSO89 | SHORT HANDLE, DEEP 60 DEG OFFSET INCHES 1/4-9/32 | 1 | |
Z143-100 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Z242-105 | ENGINE INLET PLUGS (242 model) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Z701-106 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Z750-106 | ENGINE INLET PLUGS (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.