Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
545-020 | STANDARD TIP | 1 | |
PPEPN006 | STANDARD TIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA208A-2 | STANDARD TIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
9317796 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
AF-5272 | CUSTOM COUNTERBORE ROTARY ADJUSTABLE X STYLE PROBE WITH THE COIL LOCATED AT THE EDGE OF THE PROBE TIP, .936'-1.0" 2.0"WL, SUPPLIED WITH A 4 PIN FICHER CONNECTOR, 100 KHz-2MHz Includes Test Report and Certificate of Conformance REFERENCE STANDARD - NDT3117 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFP-1012 | 10 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFP-1012/90 | 10 MHZ 90° .125"Ø diameter focused pencil transducer with a .060" Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFP-1512 | 15 MHZ .125" dia focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFP-1512/90 | 15 MHZ 90° SHAFT .125" dia focused pencil transducer with a .060" Replaceable tip. Standard microdot connector | 1 | |
AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EX601R51093 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L17-200 | WING COVERS, standard wingtip, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L17-205 | WING COVERS, standard wingtip, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M1-TIPS-STD | STANDARD REPLACEMENT TIPS | 1 | |
MAU-220 | WING COVERS (standard tip), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MAU-225 | WING COVERS (standard tip), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-200 | WING COVERS (standard wingtips), WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-205 | WING COVERS (standard wingtips), ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-240 | WING COVERS (standard wingtips), hail protection type, WINTER USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PA24-245 | WING COVERS (standard wingtips), hail protection type, ALL YEAR USE (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PPEPPMT01 | STANDARD SOLDER TIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGD2B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 7/32" | 1 | |
SGD4B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 1/4" | 1 | |
SGD6B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 5/16" | 1 | |
SGD8B | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SGD8BR | SCREWDRIVER, SOFT GRIP STANDARD FLAT TIP 3/8" | 2 | |
ST10-907-H | STANDARD TOOL - CARBIDE TIPPED DRILL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U8010011 | S-MP-3 MECHANICAL IMPEDANCE ANALYSIS PROBE, STANDARD, RIGHT ANGLE PROBE, .5 IN. TIP DIAMETER (CAN BE | 1 | |
U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.