RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 767457-1-T | CLEVIS ROD END TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1000-K-954 | 10" KDP SS Cylinder, Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1000-K-956 | SS Cylinder Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1045842-P26 | ROD END, RIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1045842-P27 | ROD END, LEFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 105-13141 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 105-13144 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-0110-73-113 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1198-505 | ROD END TORQUE WRENCH ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1211260-101-TF | ROD END TEST FIXTURE (2 ITEMS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1544315AT1-1 | ROD END TORQUE SOCKET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 17ME65B00116-18 | ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21-025-00 | BLUNT ENDED METAL ROD 5'' | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2517000F106 | STAKING TOOL, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2541501-3-TF | END ROD TEST FIXTURE (2 IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 273A1206-1 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 273A2204-1 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 273A2504-1 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2750FAS KIT | 3/8" TEMP BOLT FLAP ACTUATER ROD END | 1 | |
| 275A1106-3 | ROD END ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 275A1106-5 | ROD END ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 282900TF1-33 | Rod End Rig Pin | 1 | |
| 296736-1 | NUT AND ROD END GAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 30-2111004-01 | ROD END (SM2) S/ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 306P15 | 90° SURFACE PROBE, .125"Ø X .2" DROP X 5" LONG, 1-3MHZ, MICRODOT, W/30°BEND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 314P24 | 90° SURFACE PROBE, .125"Ø X .25" DROP X 4.5"LONG, 1-3MHZ, MICRODOT , W/15° BEND .6" FROM THE TIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3257895-1 | TOOL FOR END ASSY ROD (3IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A93-2021-00 | EXTRACTOR,PITCH CONTROL ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A98-2037-20 | ROD THREADED END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 330A98-2038-20 | ROD THREADED END | 1 | |
| 341203-500 | ROD EYE-END | 1 | |
| 3799K15 | ROD END M10X1.5 X 75 STEEL BLACK OXIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G05951 | TOOL,M/R DAMPER ROD END REMOVAL/INSTALLATION | 1 | |
| 3G6230A01132 | UPPER ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6230A01133 | UPPER ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412B5MHZ35R41FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH A 41mm (1.614") RADIUS WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| 412B5MHZ35R48FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH A 48mm(1.890") RADIUS WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| 412B5MHZ35R80FE | CUSTOM 5MHz 35° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 80mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003096 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412B5MHZ40R75FE | CUSTOM 5MHz 40° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR WIT A 75mm RADIUS. USED WITH AIRBUS REFERENCE STANDARD PART NUMBER 98A54003069 Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412B5MHZ45FE | CUSTOM 5MHz 45° TRANSVERSE WAVE TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. REFERENCE: AIRBUS A300-600 PART 4 54-50-15 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4MIT65B01501 | EQPT - STAKING, ROD END | 1 | |
| 56724S0000 | SPANNER SET(3 PIECE)RUD.ROD END REPL | 10 | |
| 59935K45/RH | BALL JOINT ROD END (MALE) RIGHT HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 59935K55/RH | BALL JOINT ROD END (FEMALE) RIGHT HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 60745K261 | BALL JOINT ROD END 1/2"-20 RH MALE SHANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 615000AT3 | Assembly Tool, Rod End | 1 | |
| 63832-1 | ROD, EXTENDED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65-44834-F6 | Rod End Assembly Pressing Fixture | 1 | |
| 6F6230A01034 | LOWER ROD END ASSY AND TUBE ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6230A01134 | UPPER ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6ME65B02200-1-10 | ROD END ASSY-LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6ME65B02200-1-11 | ROD END ASSY-RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6ME65B02200-10 | Rod End Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6ME65B02200-11 | Rod End Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6MIT65B01503 | Adapter-torque wrench rod end NLG steering actuator | 3 | |
| 70101-08202-041 | ROD END ASSY^2^ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70400-06638-043 | CLEVIS ASSY,ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70400-06638-044 | CLEVIS,ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70700-77306-041 | DAMPER ROD END BEARING REMOVE / INSTALL TOOL | 1 | |
| 764711-ER | END ROD (3 IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7MIT65B01500 | DIE - BEARING STAKE, ROD END ASSEMBLY 65B01513-1 AND -6 | 1 | |
| 7MIT65B01502 | DIE - BEARING STAKE, ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8294-ERT | ROD END TEST FIXTURE (4 ITEMS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 833561-1 | Tendion Rod Adjustment Wrenches Kit | 1 | |
| 835064-1 | Rod End Set Fixture | 1 | |
| 8819571000 | ENDOSCOPIC ROD GUIDE | 4 | |
| 895-3101-35-107 | TOOL DAMPER ROD END REPLACEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8MIT65B01500 | TORQUE FIXTURE - ROD END, RETRACT ACTUATORS | 2 | |
| 920720-1-1 | I B ROD END TORQUING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 920748-1-1 | 0/B ROD END TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 927D | ROD, THREADED END, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9402CRL104-4002 | CLEVIS, ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 96-520011 | ROD END, TAB CONTROL FIXED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A27902016001 | FITTING END ROD | 1 | |
| 98D55109010000 | RODEND SUPORT STRUT WRENCH | 13 | |
| 98F52308227100 | ROD END COMPL. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F52308227102 | ROD END COMPL. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L27004020144 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L27004020146 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L32104022104 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A101-4 | Rod End, Male | 3 | |
| A27088-11 | Rodendassy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27088-21 | Rod End Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27108-17 | INBD Lock Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27108-19 | OUTBD Lock Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27118-10 | ROD END-WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27118-13 | ROD END-WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27118-16 | ROD END-WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27118-40 | ROD END-WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27118-41 | ROD END-WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32032-44 | Rodend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32040-10 | Wrench-Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32040-12 | WRENCH - ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32040-15 | Wrench-rod end | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32040-18 | WRENCH - ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32040-4 | WRENCH ROD END | 1 | |
| A32040-7 | Wrench-rod end | 3 | |
| ABNC-MMD6 | RG196 low noise 6 foot 50 ohm (1.83 meter) coax cable assembly with a BNC connector on one end and a 5-44 (mini-Microdot compatible) connector on the other end. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACL00-MDH-6 | CABLE LEMO 00 TO MICRODOT( WITH HANDLE ON MD END) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AEXT-8 | STRAIGHT RIGID STAINLESS STEEL SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 8" LENGTH( 5.5" WORKING LENGTH). Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-1018-5S | 10MHZ .187"Ø ELEMENT, .25" Ø STAINLESS STEEL CASE .500" TALL. WITH AN END MOUNT MICRODOT CONNECTOR . Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-1018S | 10MHZ .187"Ø ELEMENT, .25" Ø STAINLESS STEEL CASE .500" TALL. WITH AN END MOUNT MICRODOT CONNECTOR . Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-1050S | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 10.0MHZ PIEZOCOMPOSITE ELEMENT, .500"Ø SUPPPLIED WITH A END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-221HS | High Damped Videoscan TypeContact Transducer, 2.25 MHz, 1.00"(25.4mm)Ø Element Diameter, Fingertip Case Style, End Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-518S | FINGERTIP CONTACT TRANSDUCER, 5MHz, .187Ø ELEMENT, .25Ø CASE. END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-531S | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 5.0MHZ, .312"Ø WITH END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-537S | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 5.0MHZ, .375"Ø WITH END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFC-537S-6 | SINGLE ELEMENT FINGER TIP CONTACT TRANSDUCER 5.0MHZ, .375"Ø .600" H x .500" Ø WITH END MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFL-445AS | 45° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFL-460AS | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFL-470AS | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFL-570AS | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. 737 Pt4, 57-10-17 | 1 | |
| AFLX-10 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 10.0" (25 CM) LONG. | 1 | |
| AFLX-12 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 12.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX-18 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 18.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX-3 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 3.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX-6 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 6.0 | 1 | |
| AFLX-6.5 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 6.5" OVERALL LENGTH WITH A 4.0" WORKING LENGTH. INCLUDES CERTIFICATE OF CO | 1 | |
| AFLX-7 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 7.0" LENGTH. Includes Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX-8 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 8.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX-9 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 9.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX90-12 | 90° ANGLE PROBE EXTENDER, MICRODOT CONNECTOR, FLEX SHAFT 12.0" LENGTH. Includes Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLX90-6 | 90° ANGLE PROBE EXTENDER, MICRODOT CONNECTOR, FLEX SHAFT 6.0" LENGTH | 1 | |
| AFLXR-10 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 10.0"(25 CM | 1 | |
| AFLXR-12 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 12.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLXR-15 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 15.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLXR-2 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 2.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLXR-6 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 6.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFLXR-6.5 | 90° ANGLE FLEXIBLE SHAFT PROBE / TRANSDUCER EXTENDER, 6.5" LONG SUPPLIED WITH A MICRODOT CONNECTOR. INCLUDES CERTIFICATE OF CONFORMANCE | 1 | |
| AFLXR-8 | 90° DEGREE FLEXIBLE SHAFT RIGHT ANGLE PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 8.0" LENGTH. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-1060AS | 60° IN ALUMINUM 10 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-1070AS | SUB-MINITURE 70° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-1075AS | SUB-MINITURE 75° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-245AS | 45° IN ALUMINUM MINI ANGLE BEAM TRANSDUCER, 2.25MHz .25" x .25" ELEMENT, CASE SIZE:( .75"L x .37"W x .50"H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-260AS | 60° IN ALUMINUM MINI ANGLE BEAM TRANSDUCER, 2.25MHz .25" x .25" ELEMENT, CASE SIZE:..( .75"L x .37"W x .50"H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-270AS | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-545TS | 45° ANGLE BEAM TRANSDUCER in TITANIUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFM-560AS | 60° IN ALUMINUM 5 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AS. | 60° IN ALUMINUM 5 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570AS | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570TS | 70° ANGLE BEAM TRANSDUCER in TITANIUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0521 | CUSTOM ANGLE BEAM TRANSDUCER 5MHZ 45° in Al .25"X.25"ELEMENT. 690"L x .590"H x .300"W WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0636AGR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-0668LPR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1000A | ULTRASONIC TRANSDUCER 10MHz .100" x .250" ELEMENT, SUPPLIED WITH END MOUNT MICRODOT CONNECTOR. USED WITH NDT1086P-1. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1177 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 35° degrees in ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1183 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 45° degrees in ALUMINUM, WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1217 | CUSTOM 5MHz L-WAVE TRANSDUCER WITH A RADIUS OF 2.5" WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6033-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1218 | CUSTOM 5MHz L-WAVE TRANSDUCER WITH A RADIUS OF 2.0" WITH END MOUNTED MICRODOT CONNECTOR USED WITH NDT6033-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1266S | 5 MHz ANGLE BEAM TRANSDUCER 45° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1268S | 5 MHz ANGLE BEAM TRANSDUCER 60° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-1270S | 5 MHz ANGLE BEAM TRANSDUCER 70° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5129-T2 | CUSTOM BOEING TRANSDUCER 5 MHz W/ TAPER FROM FRONT TO BACK FOR CLEARANCE WITH END MOUNT MICRODOT CONNECTOR. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-537AS-1.92R | 37° in ALUMINUM 5MHz TRANSDUCER WITH 1.92" RADIUS, END MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-541AS-1.92R | 41° in ALUMINUM 5MHz TRANSDUCER WITH 1.92" RADIUS, END MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5826 | Custpm 5MHz 31° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3196. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5827 | Custpm 5MHz 33° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFS-5828 | Custpm 5MHz 26° shear wave transducer .375" element. 2.0"(51mm) radius. Case Size: ..75"L x .50"W x .25"H end mounted microdot connector. Used with reference standard NDT3197. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFX-260AS | 60° IN ALUMINUM 2.25MHZ .160" X.187"; MINI ANGLE BEAM TRANSDUCER WITH END MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ALK5-36 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM3068-1-51 | ROD-END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM3068-3-51 | Rod End And Holder TOOL TEST (2IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AMH-24.5MSE/200MWL | MANUAL BOLT HOLE PROBE WITH DELRIN(PLASTIC) SPLIT END TIP. 50-500KHZ , MICRODOT CONNECTOR 200mm(7.87") WORKING LENGTH 24.5mmØ(.967"), EXPANDABLE TO 26.0mmØ(1.02"). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-903-5B | RIGID SURFACE PROBE, 50-500KHz., .030" DROP, .125"Ø, 50-500KHz, 5.0" LONG WITH A 30 DEGREE BEND SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APN-903-6B | RIGID SURFACE PROBE, 50-500KHz., .030" DROP, .125"Ø, 50-500KHz, 6.0" LONG WITH A 30° DEGREE BEND SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARB11-21 | RETAINER PLAIN, ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ARD-350S | 3.50MHz .500"Ø REPLACEABLE DELAY TRANSDUCER WITH END MOUNT MICRODOT CONNECTOR. Delay Tip length = .437". Other lengths available upon request. Includes Test Report and Certificate of Conformance. | 1 | |
| AST6136 | TIE ROD END REME/INSTALL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT-73738 | Replacement Fixture, Rod End | 1 | |
| AT-73738B | Rod End Pin | 1 | |
| ATI-246500 | ASSEMBLY TOOL ROD END ADJUSTMENT & STROKE VERIFICATION UPLOCK ACTUATOR NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AXPN-93-5B/1-3MHZ | 90° SURFACE PROBE, Ø.072" TIP X .300" DROP X 5"LONG, 1-3MHZ,MICRODOT , W/30°BEND | 1 | |
| B32031-6 | Rod end torquing fixture assy | 3 | |
| B71001-106 | Rodend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B78008-19 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 11 | |
| B78014-29 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 2 | |
| B78014-37 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AN | 8 | |
| BRE3700 | ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BROWN & SHARPE GAGE 0-11 | END RODS SET 1-11 | 1 | |
| C27071-1 | POSITIONING EQUIPMENT - ROD END, ACTUATOR | 3 | |
| C32032-28 | ROD END TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32032-4 | Rod End Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32032-61 | Rod end assy | 2 | |
| C32032-62 | Axle Rod End Assembly | 2 | |
| C32035-14 | ROD GUIDE END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32038 | ROD END BEARING RMVL/INSTL EQPT. ACTUATORS MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32038-42 | Downlock Rod End Wrench | 5 | |
| C32038-43 | DOWNLOCK ROD END WRENCH | 5 | |
| C32038-44 | Uplock Rod End Wrench | 6 | |
| C32038-45 | RETRACT ROD END WRENCH | 6 | |
| C32038-5 | ROD END WRENCH | 4 | |
| C32038-55 | Rod End Bearing Removal/Installation Equipment - Actuators Main Landing Gear (MLG) | 6 | |
| C32038-81 | ROD END BEARING RMVL/INSTL EQPT-ACTUATORSMLG | 2 | |
| C71020-18 | STABILIZER ROD END | 2 | |
| C71020-18-F | STABILIZER ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78027-14 | ROD END PIN ASSEMBLY | 1 | |
| CAT5925-2 | WRENCH, ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CG240-8 | SNAP-ON PULLER ROD WITHOUT END FITTING CG240-8 (PULLER) | 3 | |
| CG250-BA | ROD WITHOUT END FITTING - SNAP-ON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D5284000400000 | ROD ASSY END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAH 602592 | Setting Bung (rod end) | 1 | |
| DAH602592 | SETTING BUNG-ROD END | 1 | |
| DSC4-3A | BEARING ROD END (ELEVATOR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E54841-1 | ROD END TORQUE FIXTURE (4 IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E56572 | ROD END REMOVAL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E71692 | ROD END TORQUE FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70292 | ROLLER SWAGING TOOL-SLEEVE,ROD &HEAD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70292-1 | ROLLER SWAGING TOOL - SLEEVE, ROD AND HEAD ENDS, MAIN LANDING GEAR ACTUATOR | 2 | |
| F71313 | WRENCH SOCKET ROD END BEARING | 1 | |
| F71313-10 | Socket Wrench - Rod End Bearing | 2 | |
| F71313-11 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-12 | WRENCH -0 SOCKET ROD END BEARING | 2 | |
| F71313-13 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-14 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-15 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-16 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-17 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-18 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-19 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-20 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-21 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-22 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-23 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-24 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-25 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-3 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-31 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-32 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-33 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-34 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-35 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-36 | WRENCH-SOCKET, ROD END BEARING | 5 | |
| F71313-37 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-38 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-39 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-40 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-41 | WRENCH ROD END BEARI | 2 | |
| F71313-42 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-43 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-44 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-45 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-46 | WRENCH - SOCKET, ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-47 | WRENCH - SOCKET, ROD END BEARING | 4 | |
| F71313-48 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-49 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-50 | WRENCH ROD END BEARI | 2 | |
| F71313-51 | ROD END BEARING SOCKET WRENCH | 2 | |
| F71313-52 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-52-5 | ROD END BEARING SOCKET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F71313-55 | Wrench, Socket - NLG Steering Cylinder Rod End | 4 | |
| F71313-6 | WRENCH ROD END BEARI | 2 | |
| F71313-7 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-8 | WRENCH ROD END BEARI | 3 | |
| F71313-9 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-XX | Wrench -Socket. Rod End Bearing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F7131333 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F72773 | WRENCH ROD END ACT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72776 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72777 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72798 | ROD END WRENCH -0 MLG ACTUATOR USED TO INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72798-5 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72798-6 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72798-7 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72798-8 | WRENCH ROD-END ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80137-1 | POSITIONER TOOL - ACTUATOR ROD END | 1 | |
| FE277-000-ER | END ROD KIT(8IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G-4376L | Torque Adapter, Rod End Nut | 1 | |
| G20004-15 | DIE - BEARING STAKE, ROD END ASSY | 3 | |
| G21008-15 | Rod end female | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G21008-23 | Rod end male | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27076-1 | POSITIONER EQUIPMENT - ROD END, RUDDER PCA | 2 | |
| G27101-1 | Measurement Equipment -Rod End Play. Lower Rudder Pcu | 2 | |
| G32028-12 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32028-138 | Rodend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32028-139 | Rodend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32060-1 | ADAPTER - ROD END TORQUE | 2 | |
| G36044-91 | RH ROD END | 1 | |
| G36044-92 | LH ROD END | 1 | |
| GA3400 | UPPER MAIN ROTOR SERVO ROD END BEARING PN GA3400, (OR COMMERCIAL EQUIVALENT) | 3 | |
| HM-5C | STABILIZER ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HRR946 | TIE ROD END TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE3J13516 | SETTING GAGE- ACTUATOR ROD END | 11 | |
| IAE3J13517 | Gage，setting-engine assy，acc actuator，rod end | 7 | |
| J32037-96 | ROD END FITTING ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32038-10 | ROD END BULLET NOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32038-59 | ROD END TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32038-6 | ROD END TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32038-60 | ROD END BULLET NOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32057-20 | Rodendhldr | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32091-61 | ROD END CLAMP ASSEMBLY - C1 | 1 | |
| J32091-81 | ROD END CLAMP ASSEMBLY - C2 | 1 | |
| K32005-1 | PULLER EQUIPMENT - PIN RETRACT ACTUATOR ROD END ML | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71002-79 | ROD END (RH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71002-80 | ROD END (LH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KSR167405BK | Bearing -Rod End | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L32 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|2.90" MIN AND 4.12" MAX;1.000" MAX;MANUAL TOOL;PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT; CHROMIUM;PROFESSIONAL/INDUSTRI | 4 | |
| L32A320-22 | ROD-END | 4 | |
| LST67793 | END MEASURING ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M00401H0010 1A023R | TOOL DAMPER ROD END REPLACEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M00401H001003A023R | TOOL, DAMPER ROD-END REPLACEMENT | 1 | |
| M00401H001003A023S | TOOL DAMPER ROD END POSITIONING | 1 | |
| M006-01H004-053 | ROD END ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23389 | MANDREL FOR ASSEMBLY OF BUSHINGS ON ROD AND CLEVIS END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M0NT23390 | MANDREL FOR ASSEMBLY OF BUSHINGS ON ROD AND CLEVIS END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MFLX-6 | STRAIGHT FLEXIBLE SHAFT PROBE EXTENDER SUPPLIED WITH A MICRODOT CONNECTOR, 6.0 | 2 | |
| MIT65C38058-1 | ROD END REPLACEMENT FIXTURE - B737 | 1 | |
| MMP903-50B-1-3M | 90° SURFACE PROBE, Ø.072" TIP X .300" DROP X 5"LONG, 1-3MHZ,MICRODOT , W/30°BEND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MP905-50B | 90° SURFACE PROBE, .125"Ø X .500" DROP X 5"LONG, 50-500KHZ, MICRODOT, W/30°BEND | 1 | |
| MPEN92-3B/2M | 90° Surface Probe, Shielded, Ø.095" tip x .2" drop x 3" long, 1-3MHz, Microdot, 15° Bend 1" from the tip | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPEN925-4.5B | 90° Surface Probe, .095"Ø x .25" Drop x 4.5"Long, 50-500KHz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPEN925-4.5B/500K | 90° Surface Probe, .095"Ø x .25" Drop x 4.5"Long, 500KHz-1MHz, Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPEN93-5B | 90° Surface Probe, .095"Ø x .300" Drop x 5"Long, 50-500Khz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPEN93-5B/2M | 90° Surface Probe, .095"Ø x .300" Drop x 5"Long, 1-3MHz,Microdot , w/15° Bend .6" from the tip | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPEN95-6B/2M | 90° Surface Probe, .095"Ø x .500" Drop x 6"Long, 1-3MHz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS21151-6 | BEARING ROD END (ELEVATOR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS508-MS525 1-35 | END RODS SET 1-35 | 1 | |
| MWF-M12 | FEMALE ROD END M12X1.25 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| N16-MSE-6 | 16 Pin Lemo to dual end microdot | 1 | |
| NONPROC2 | TOOL FOR ACTUATOR ROD END SUBASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NSA8140-04LF | ROD END (LEFT HAND) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NSA8159-010E | ROD END TEST TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NSA8159-015E | ROD END TEST ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OTC7315A | TIE ROD END RMVR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P3A1820 | BEARING ROD END | 1 | |
| PEN45-4B | 45° Surface Probe, .125"Ø x .5" Drop x 4" Long, 50-500KHz, Microdot, W/ bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN45-5B | 45° Surface Probe, .125"Ø x .5" Drop x 5" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN901-8B | 90° Surface Probe, .125"Ø x .010" Drop x 8" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN903-4B | 90° Surface Probe, .125"Ø x .030" Drop x 4" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN903-5B | 90° Surface Probe, .125"Ø x .030" Drop x 5" Long, 50-500KHz, Microdot, w/15° Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN903-6B | 90° Surface Probe, .125"Ø x .030" Drop x 6" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN903-7B | 90° Surface Probe, .125"Ø x .030" Drop x 6" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN903-8B | 90° Surface Probe, .125"Ø x .030" Drop x 8" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN91-4B | 90° Surface Probe, .125"Ø x .1" Drop x 4"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN91-5B | 90° Surface Probe, .125"Ø x .1" Drop x 5"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN91-6B | 90° Surface Probe, .125"Ø x .1" Drop x 6"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN91-7B | 90° Surface Probe, .125"Ø x .1" Drop x 7"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN91-8B | 90° Surface Probe, .125"Ø x .1" Drop x 8"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN9100-5B | 90° Surface Probe w/Bend, .125"Ø x 1" Drop x 5"Long, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-11B | 90° SURFACE PROBE, .125"Ø X .2" DROP X 11" LONG, 50-500KHZ, MICRODOT, W/30°BEND | 1 | |
| PEN92-3B | 90° Surface Probe, .125"Ø x .2" Drop x 3" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-4B | 90° Surface Probe, .125"Ø x .200 Drop x 4" Length, 50-500KHz, Microdot, w/Bend | 1 | |
| PEN92-4B/2M | 90° Surface Probe, .125"Ø x .200 Drop x 4" Length, 1-3MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-4B/500K | 90° Surface Probe, .125"Ø x .200 Drop x 4" Length, 200KHz-1MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-5B | 90° Surface Probe, .125"Ø x .2" Drop x 5" Long, 50-500KHz, Microdot, w/Bend | 1 | |
| PEN92-5B/2M | 90° Surface Probe, .125"Ø x .2" Drop x 5" Long, 1-3MHz, Microdot, w/Bend | 1 | |
| PEN92-5B/500K | 90° Surface Probe, .125"Ø x .2" Drop x 5" Long, 200K-1MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-6B | 90° Surface Probe, .125"Ø x .2" Drop x 6" Long, 50-500KHz, Microdot, w/Bend | 1 | |
| PEN92-6B/750K-3/16 | 90° Surface Probe, .187"Ø Shaft x .2" Drop x 6" Long, 20KHz-1MHz, Tuned at 750Khz, Microdot Connector, 15° Bend 1.18" from handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-7B | 90° Surface Probe, .125"Ø x .2" Drop x 7" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN92-9B | 90° Surface Probe, .125"Ø x .2" Drop x 9" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4.5/B | 90° Surface Probe, Shielded, Ø.125" tip x .25" drop x 4.5" long, 50-500KHz, Microdot w/15° Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4.5B | 90° Surface Probe, .125"Ø x .25" Drop x 4.5"Long, 50-500KHz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4.5B-3/16 | 90° Surface Probe, .187"Ø x .25" Drop x 4.5"Long, 50-500KHz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4.5B/500K | 90° Surface Probe, .125"Ø x .25" Drop x 4.5"Long, 500KHz-1MHz, Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4.5B/500K-3/16 | 90° Surface Probe, .187"Ø x .25" Drop x 4.5"Long, 500KHz-1MHz, Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-4B | 90° Surface Probe, .125"Ø x .25" Drop x 4" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-5B | 90° Surface Probe, .125"Ø x .25" Drop x 5" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-5B/2M | 90° Surface Probe, .125"Ø x .25" Drop x 5"Long, 1-3MHz, Microdot , w/15° Bend .6" from the tip | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-5B/500K | 90° Surface Probe, .125"Ø x .25" Drop x 5" Long, 200K-1MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN925-6B | 90° Surface Probe, .125"Ø x .25" Drop x 6" Long, 50-500KHz, Microdot, 30° Bend near the handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN93-6B/2M | 90° Surface Probe, .125"Ø x .300" Drop x 6"Long, 50-500KHz,Microdot , w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN94-4B | 90° Surface Probe, .125"Ø x .400" Drop x 4"Long, 50-500KHz,Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-3B | 90° Surface Probe, .125"Ø x .500" Drop x 3"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-4.5B/2M | 90° Surface Probe, .125"Ø x .5" Drop x 4.5"Long, 1-3MHz, Microdot , w/15° Bend .6" from the tip | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-4B | 90° Surface Probe, .125"Ø x .500" Drop x 4"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-4B/500K | 90° Surface Probe, .125"Ø x .500" Drop x 4"Long, 200KHz-1MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-5B | 90° Surface Probe, .125"Ø x .500" Drop x 5"Long, 50-500KHz, Microdot, w/Bend | 1 | |
| PEN95-6B | 90° Surface Probe, .125"Ø x .500" Drop x 6"Long, 50-500KHz, Microdot, w/Bend | 1 | |
| PEN95-6B/2M | 90° Surface Probe, .125"Ø x .500" Drop x 6"Long, 1-3MHz, Microdot, w/ 30° Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-6B/500K | 90° Surface Probe, .125"Ø x .500" Drop x 6"Long, 200K-1MHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-7B | 90° Surface Probe, .125"Ø x .500" Drop x 7"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN95-9B | 90° Surface Probe, .125"Ø x .500" Drop x 9"Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN975-4B | 90° Surface Probe, .125"Ø x .75" Drop x 4" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN975-5B | 90° Surface Probe, .125"Ø x .75" Drop x 5" Long, 50-500KHz, Microdot, w/Bend | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PEN975-5B/2M | 90° Surface Probe, .125"Ø x .75" Drop x 5" Long, 1-3MHz, Microdot, w/15° Bend .6" from the tip | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PENFLX95-5B | 1/8 Diameter, 90 deg, .5 drop, 5" long bend surface probe 50-500Khz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PT.59 | DC-10 ANGLE BEAM TRANSDUCER 45°, 5MHz .187" x .187" ELEMENT, END MOUNT MICRODOT CONNECTOR. CASE SIZE: .690" x .310" x .560". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA26177 | PLIERS - HPC, TIEROD RET WASHER BENDING_[PWA26177] | 1 | |
| RAM-8TM | ROD END W/ BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB 92700-10353-042 | MAIN ROTOR DAMPER ROD END TORQUING TOOL | 1 | |
| RBW005G05951-3G | Main Rotor Damper Rod End R&R Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBWM00401H001003A023 R&S | Damper Rod-End Tool Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBWM00401H001003A023R | DAMPER ROD-END REPLACEMENT | 2 | |
| RBWM00401H001003A023S | Damper Rod-End Positioning | 1 | |
| RR5H8-2E8693 | BEARING ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SI12C | ROD END BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SIBP12S/B2 | FEMALE ROD END M12X1.25 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SOTX001ARTLS | OEM SCHROEVEND MOD TOE ROD TLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPEN45-4B | .072" 45° 4 Surface Probe, .5 Drop 50-500KHz, Microdot, W/BEND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPEN925-5B/2M | Surface Probe, .072" tip, 90 Degree, .25" drop, 5" length, 1-3Mhz , 30 Degree Bend, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPEN925-6B/2M | Surface Probe, .072" tip, 90 Degree, .25" drop, 6" length, 1-3Mhz , 30 Degree Bend, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPEN93-5B/2M | 90° SURFACE PROBE, Ø.072" TIP X .300" DROP X 5"LONG, 1-3MHZ,MICRODOT , W/30°BEND | 1 | |
| SPEN95-4B | .072" Dia. Tip, Shielded, 90° .5 Drop 4" Surface Probe w/Bend, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPEN95-6B | .072" Dia. Tip, Shielded, 90° .5 Drop 6" Bend Surface Probe, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-12450 | Wrench - Rod End | 1 | |
| SPL-12584 | ROD END BEARING SOCKET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-5359 | ROD END /STROKE STOP (2IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9367 | Wrench - Rod End | 1 | |
| ST2580-103 | WRENCH - ROD END BEARING TOOL IS USED TO HOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST929-1B | ROLLER SWAGING TOOL - ROD END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-73467A | Swaging Tool, Rod End | 1 | |
| TEK-5000-1 | ULTRASONIC TRANSDUCER 10MHZ /100” X .250” ELEMENT, SUPPLIED WITH END MOUNT MICRODOT CONNECTOR. USED WITH NDT1086P-1 | 1 | |
| TM-6 | ROD END, MALE | 3 | |
| U8616353 | 90° SURFACE PROBE, Ø.072" TIP X .300" DROP X 5"LONG, 1-3MHZ,MICRODOT , W/30°BEND | 1 | |
| XPEN95-6B/2M | .062" diam., 90° Surface Probe, .5" drop, 1-3MHz, 6" Long, w/ 30° Bend, Microdot Connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ZXCN6-35MESP8G-T | ADJUSTABLE ROD END FIXTURE (5IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
