| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 383300TF1-101 | RIGGING TOOL | 9 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S06002512002 | RIGGING TOOLING – AILERON AT RIB 27 ATR42 LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S06002512003 | RIGGING TOOLING – AILERON AT RIB 27 ATR42 RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98V27003000000 | PFC RIGGING TOOL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE56785 | Rigging Tool (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0009-0148GSE1-1 | TOOL, ACTUATOR RIGGING - HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0110455 | TOOL-RIGGING | 1 | |
| 08-8050-6000 | PIN:,TOOL RIGGING PO | 7 | |
| 08-8051-6000 | TOOL-CONDITION LEVER RIGGING | 5 | |
| 0U190864 | TOOL-RIGGING,SPOOL CONTROL OUTPUT,THS ACTUATOR | 8 | |
| 1/4RIGPIN | 1/4 RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 105-42110 W1 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3000-01-41 | AGUSTA TOOL - RIGGING PIN SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3600-37-101 | TOOL SET, ENGINE CONTROL RIGGING PINS AND LVDT/RVDT TEST BOX. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3600-37-127 | TOOL SET, ENGINE CONTROL RIGGING PINS AND LVDT/RVDT TEST BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10MMRIG-PIN | RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3703 | DOOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3703G01 | DOOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12-00833 | CABLE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12145-007-001 | LEAR 45 UPPER DOOR RIGGING TOOL | 3 | |
| 12245-058-001 | FLAP RIGGING TOOL BOARD SET | 2 | |
| 12245-060-001 | CONTROL CABLE RIGGING TOOL | 1 | |
| 12245-104-001 | AILERON RIGGING TOOL | 3 | |
| 1226HW | RIGGING TOOL KIDRIG CABLE RIGGING TOOL | 1 | |
| 12345-105-009 | RUDDER RIGGING TOOL | 2 | |
| 12MIT65B04017 | RIGGING TOOL - INBOARD KRUEGER FLAPS NUMBER 11 THRU NUMBER 16 | 2 | |
| 133-384015-9 | FLIGHT CONTROL RIGGING TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 133-384016-1 | CANOPY RIGGING TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 14Y0060-003 | T/R RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 14Y0070-001 | T/R REAR LATCH RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 16A14229L1-1 | TOOL ASSEMBLY, HOLDING-ISA RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 170T05550-401 | TOOL, RIGGING | 3 | |
| 190T05560-401 | TOOL - RIGGING, LEADING EDGE SLATS | 2 | |
| 190T05980-401 | SET - RIGGING TOOLS, FLAP | 1 | |
| 196T07770-401 | TOOLS, RIGGING - INBOARD FLAP | 1 | |
| 196T07770-403 | TOOLS, RIGGING - INBOARD FLAP | 1 | |
| 196T07800-401 | TOOL SET, RIGGING - RUDDER | 1 | |
| 196T07810-401 | TOOLS, RIGGING AND DEFLECTION - AILERON | 1 | |
| 196T07820-401 | TOOLS, RIGGING/DEFLECTION - ELEVATOR | 1 | |
| 196T08520-401 | TOOL, RIGGING - LEADING EDGE SLATS | 1 | |
| 196T09300-401 | TOOLS, RIGGING-OUTBOARD FLAP | 1 | |
| 196T09300-405 | TOOLS, RIGGING-OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C5714 | TOOL KIT - ENGINE RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6744 | TOOL SET - RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6744G02 | RIGGING TOOL SET | 1 | |
| 1C9353 | TOOL SET ASSEMBLY - RIGGING BY-PASSVALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9353G02 | VBV RIGGING TOOL SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9359 | TOOL SET ASSY - RIGGING-VARIABLEINLET GUIDE VANES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21Y999A | RUDDER PEDAL RIGGING TOOL | 2 | |
| 2471003-1 | TOOL RIGGING ASSY | 4 | |
| 25-7Y15A | RIGGING TOOLS | 2 | |
| 269A9204 | RIGGING TOOL T/R | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269A9256 | RIGGING TOOL - TAIL ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269A9271 | Rigging Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269T9204 | RIGGING TOOL TAIL ROTOR LOW TIP SPEED | 1 | |
| 269T9204-003 | RIGGING TOOL TAIL ROTOR LOW TIP SPEED | 1 | |
| 269T9204-003P | RIGGING TOOL TAIL ROTOR LOW TIP SPEED | 1 | |
| 269T9204-005 | Rigging Tool Tail Rotor Low Tip Speed | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269T9204-3 | RIGGING TOOL TAIL ROTOR LOW TIP SPEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 269T9204P | RIGGING TOOL TAIL ROTOR LOW TIP SPEED | 1 | |
| 269T9269 | RIGGING TOOL | 2 | |
| 27-01-3775 | RIGGING TOOL - ELEV DRIVE ARM | 1 | |
| 27-1-3622-01 | TOOL - IDLER LEVER RIGGING (MV7627-5-01) | 1 | |
| 27-1-3622-1 | Rigging Tool Idler Lever | 1 | |
| 27-1-3775B | TOOL DRIVE-ARM RIGGING | 1 | |
| 27.1-3775B | TOOL RIGGING KIT,ELEVATOR DRIVE ARM F50 | 1 | |
| 271-4119-01 | TOOL RIGGING DIAL GAUGE | 1 | |
| 28-0-4236 | TOOL RIGGING THRUST REV CABLES | 2 | |
| 2C14697 | TOOL SET, RIGGING - BY-PASS VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14697 REV D | TOOL SET, RIGGING - BY-PASS VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14697G02 | TOOL SET, RIGGING-BY-PASS VALVE | 1 | |
| 2C14697G03 | TOOL, RIGGING ‐ VARIABLE BYPASS VALVE DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6103 | TOOL SET- ENGINE RIGGING | 2 | |
| 2C6103 REV L | TOOL SET- ENGINE RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6103G01 | TOOL SET, ENGINE RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6352G07 | SET, TOOL RIGGING VBV DOORS | 4 | |
| 2C6395G03 | VSV RIGGING TOOL | 5 | |
| 2C6488G01 | PARTS OF VSV RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6897G01 | RIGGING TOOL- BYPASS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6897G02 | TOOL RIGGING BYPASS | 1 | |
| 2MIT65B00116 | RIGGING TOOL - ECCENTRIC FOREFLAP SEQUENCE MECHANISM, INBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65-73720-1 | TEST EQUIPMENT - RIGGING TOOL, INBOARD FLAP | 1 | |
| 2TE65-73720-2 | Tool - Inboard Flap Rigging | 1 | |
| 2TE65B04017-1 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3/16RIGPIN | 3/16 RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
| 35-92119-0001 | RAMP LOCK CYLINDER RIGGING TOOL | 1 | |
| 35-92119-0003 | Ramp Lock Cylinder Rigging Tool | 1 | |
| 350A94-2700-00 | FLIGHT CONTROL RIGGING TOOL -INCL. 7 DEGREE PLATE & PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350A94-2700-00/05 | Flight Control Rigging Tool-incl. 7 degree plate & pins | 1 | |
| 350A94-2700-06 | FLIGHT CONTROL RIGGING TOOL KIT | 1 | |
| 350A94-3701-00 | MAIN ROTOR RIGGING TOOL | 1 | |
| 350A94270006 | FENNEC RIGGING TOOL KIT | 1 | |
| 365A94-2740-06 | FLIGHT CONTROL RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029931 | TAIL ROTOR SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369A9927 | COLLECTIVE RIGGING, TOOL RH COMMAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29907 | TR RIGGING TOOL (4 BLADED) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29929-9 | RIGGING TOOL LONG -"D" MODEL LH COMMAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29931 | TAIL ROTOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D39929-9 | LONGITUDINAL RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369H9925 | COLLECTIVE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 383300TF1-101 | RIGGING TOOL | 9 | |
| 383300TF1101 | RIGGING TOOL ASSY | 9 | |
| 3981315-1 | NLG Rigging Tool | 1 | |
| 4 | LONGITUDINAL RIGGING TOOL (407) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 407-201-303-101 | LATERAL RIGGING TOOL 407 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 407-201-304-101 | LONGITUDINAL RIGGING TOOL (407) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412-201-700-101 | TOOL ASSEMBLY (TR RIGGING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 412-201-701-101 | TOOL ASSEMBLY (TR RIGGING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 415200GSE1 | HORIZONTAL STABILIZER RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 415200GSE1-1001 | RIGGING TOOL, HSTA | 4 | |
| 416200G SE1-1001 | HORIZONTAL STABILIZER RIGGING TOOL | 5 | |
| 416200GSE1-1001 | HORIZONTAL STABILIZER RIGGING TOOL | 5 | |
| 429-201-002-10 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-002-101 | RIGGING TOOL ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-004-101 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-006-101 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-007-101 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 43938 | ROLL TRIM RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 462900GSE-1003 | ELECTRONIC RIGGING TOOL | 1 | |
| 50-590158-25 | TOOL-PROP RIGGING | 2 | |
| 550T05655-403 | PIN SET,RIGGING EMBRAER AVIATION TOOLING | 1 | |
| 550T05659-401 | PRAETOR 600 FLAP RIGGING TOOLING | 1 | |
| 57738 A 0000-01 | TOOL - RIGGING | 2 | |
| 57738A0000-01 | TOOL - RIGGING | 2 | |
| 57738A0000‐01 | TOOL, RIGGING | 2 | |
| 60287D0000-01 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6199-400 | RIGGING PIN TOOL | 6 | |
| 63627FE380190 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6MMRIGPIN | 6.0MM RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6P1005510051CKF | HSTAB RIGGING TOOL - OPTIONAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 700-24100-1-SFIX L.H. | RIGGING TOOL - ELEVATOR CONTROL SURFACE L/H | 2 | |
| 700-24100-1-SFIX-002 | ELEVATOR RIGGING TOOL L/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 700-24100-1-SFIX-002-IAS | ELEVATOR RIGGING TOOL L/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 700-24100-1-SFIX-LH | RIGGING TOOL, ELEVATOR CONTROL SURFACE | 2 | |
| 700-24100-1-SFIX101 | RIGGING TOOL | 1 | |
| 700-24100-2-SFIX R.H. | Rigging Tool ? Elevator Control Surface R/H | 1 | |
| 700-24100-2-SFIX-002 | ELEVATOR RIGGING TOOL R/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 700-24100-2-SFIX-002-IAS | ELEVATOR RIGGING TOOL R/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 700−24100−1−SFIX L.H. | Rigging Tool − LH Elevator | 2 | |
| 700−24100−2−SFIX R.H. | Rigging Tool − RH Elevator | 1 | |
| 70452 | Turnbuckle Wrench Cable Rigging Tool ( Description: Cable Rigging Tool ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80T2751 | RIGGING TOOL THRUST REVERSER | 3 | |
| 81402FE380190 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 822-3292GSE1-1 | TOOL,ACTUATOR RIGGING-HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 82740010 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 82740010-001-58 | RIGGING TOOL, ROLL SPOILER ACTUATOR | 2 | |
| 85517021-001-138 | LEFT ELEVATOR RIGGING TOOL Q400 | 4 | |
| 85517021-002-138 | TOOL, RIGHT ELEVATOR RIGGING | 4 | |
| 857400002-S901-138 | TOOL TAB RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 85740002-S901-138 | TOOL-TAB RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 85740007-S901-138 | TOOL, AILERON, RIGGING BOARD | 2 | |
| 85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| 85740009-S903-138 | TOOL, TRIM TAB RIGGING | 2 | |
| 85741000-001-138 | TOOL, AILERON RIGGING | 2 | |
| 85741000-003-138 | AILERON TAB RIGGING TOOL | 2 | |
| 85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
| 86101FE380190 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 86201 | TOOL-RIGGING,TTU | 3 | |
| 95-92054-0001 | RIGGING TOOL AOA TRANSMITTER | 1 | |
| 95-92054-0001?? | RIGGING TOOL, AOA TRANSMITTER | 1 | |
| 95-92054-0001 | RIGGING TOOL, AOA TRANSMITTER | 1 | |
| 95-93016-0003 | RIGGING TOOL | 1 | |
| 95-93032-0001 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA 95-93032-0001 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A28002169000 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 983-9138-681 | THSA RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27003001000 | RIGGING PIN - LDG GEAR TOOLING | 29 | |
| 98A27901002000 | PIN RIGGING TOOLING | 32 | |
| 98A33403500000 | HORIZONTAL RIGGING TOOL | 2 | |
| 98A33403501000 | VERTICAL RIGGING TOOL | 2 | |
| 98A33403600000 | HORIZONTAL RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27207546000 | PIN RIGGING-RUDDER PLAY TOOL | 26 | |
| 98D27207549000 | TOOL- RIGGING PIN | 29 | |
| 98D27303003001 | CHECK TOOL-ELEVATOR RIGGING | 22 | |
| 98D27303004000 | DTI TOOL RIGGING ARTIFCIAL RODS | 9 | |
| 98D27407532000 | RIGGING PIN THS MECH.CONTROL TOOLING | 19 | |
| 98D27504005000 | FLAP RIGGING PIN. TOOLING | 24 | |
| 98D27504006000 | PIN RIGGING-FLAPS TRK,2 & 4. TOOLING | 23 | |
| 98D27504014000 | FLAP RIGGING BOARD TRACK 2 TOOL | 10 | |
| 98D27504015000 | FLAP RIGGING BOARD TRACK 3 TOOL | 7 | |
| 98D27504016000 | FLAP RIGGING BOARD TRACK 4 TOOL | 7 | |
| 98D27504038001 | A320 SHARKS FIN FLAP RIGGING TOOL | 18 | |
| 98D27504113001 | A321 SHARKS FIN FLAP RIGGING TOOL | 14 | |
| 98D27804012000 | RIGGING GAUGE TOOL | 12 | |
| 98D32104083000 | RIGGING TOOL | 16 | |
| 98D32104083200 | RIGGING SPACER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D34103008000 | RIGGING TOOL FOR ADIRU RACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D34103008001 | RIGGING TOOL ADIRU RACK | 1 | |
| 98D52103006000 | PIN RIGGING TOOL | 23 | |
| 98D52103502000 | RIGGING TOOL AIRSTAIRS | 4 | |
| 98D52207551000 | RIGGING & SAFETY PIN TOOLING | 24 | |
| 98D52308308000 | PIN - RIGGING. TOOLING | 20 | |
| 98DNSA20206060 | TEST TOOL - RELEASE CABLE , ESCAPE SLIDERIGGING PIN | 28 | |
| 98DNSA20206080 | TOOL-RIGGING PIN | 22 | |
| 98DNSA20208040 | TOOL Pin, Rigging (8mm x 40mm) | 29 | |
| 98F27201002000 | RIGGING PIN TOOL | 16 | |
| 98F27201004000 | RIGGING PIN TOOL | 7 | |
| 98F27207514000 | RIGGING PIN TOOL | 13 | |
| 98F27207515000 | RIGGING PIN TOOL | 18 | |
| 98F27207516000 | RIGGING PIN TOOL | 14 | |
| 98F27207517000 | RIGGING PIN TOOL | 12 | |
| 98F27207518000 | RIGGING PIN TOOL | 13 | |
| 98F27407506000 | RIGGING PIN TOOL | 14 | |
| 98F27608236000 | RIGGING TOOL - ACTUATOR, SPOILE | 3 | |
| 98F27608236001 | RIGGING TOOL ACTUATOR SPOILER | 6 | |
| 98F27608236002 | RIGGING TOOL - ACTUATOR, SPOILER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27608236003 | RIGGING TOOL | 12 | |
| 98F32001005000 | RIGGING PIN TOOL | 12 | |
| 98F52308279000 | TOOL-MECHANICAL INPUT - RIGGING PIN | 17 | |
| 98F52308356000 | PIN RIGGING TOOLING | 11 | |
| 98L27508732000 | RIGGING TOOL | 2 | |
| 98L27601001000 | TOOL SPANNER RIGGING | 1 | |
| 98L32101006000 | RIGGING TOOL, G2 BEARING BLG | 1 | |
| 98L57508811000 | RIGGING TOOL MOVABLE FAIRING | 2 | |
| 98S27008001200 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98V27003000000 | PFC RIGGING TOOL KIT | 2 | |
| 98V27808795000 | Slat rigging tools gauges-slat tracks | 3 | |
| 99-8030-6000 | RIGGING TOOL SET | 3 | |
| 99-8125-6000 | TOOL-PLA RIGGING | 4 | |
| 9MIT65-72788 | RIGGING TOOL RUDDER & RUDDER TAB | 1 | |
| A20004-10 | RIGGING TOOL | 5 | |
| A20004-3 | RIGGING TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27020-1 | TOOL, RIGGING | 11 | |
| A27024-31 | AILERON RIGGING BAR TOOL | 11 | |
| A27024-47 | B767 AILERON RIGGING BAR TOOL | 5 | |
| A27057-13 | RIGGING TOOL | 3 | |
| A27089-1 | B767 RIGGING GAUGE TOOL | 1 | |
| A52016-1 | CARGO DOOR RIGGING TOOL KIT | 8 | |
| ACS76046 | RIGGING TOOL − TENSATOR SPRING | 4 | |
| ACS76049 | TOOL, RIGGING TENSATOR SPRING | 4 | |
| AGE-01842-401 | TOOL - RIGGING, LEADING EDGE SLATS (ERJ170) | 6 | |
| AGE-01853-401 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-03025-401 | AUXILIARY TOOLS SET, RIGGING FLAP | 1 | |
| AGE-03025-403 | AUXILIARY TOOLS SET, RIGGING FLAP | 1 | |
| AGE-03248-401 | AUXILIARY TOOLS SET, RIGGING FLAP (REPLACES AGE-03025-401) | 4 | |
| AGE-03249-403 | TOOL, FLAP RIGGING | 3 | |
| AGE-03249-404 | TOOL, FLAP RIGGING | 2 | |
| AGE-03544-401 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-03544-403 | SET - RIGGING TOOLS, FLAP | 3 | |
| AGE-03628-401 | TOOL-RIGGING,LEADING EDGE SLATS | 3 | |
| AGE-04265-403 | FLIGHT TOOL, RIGGING PINS | 10 | |
| AGE-04447-401 | SET - RIGGING TOOLS, FLAP (ERJ170) | 3 | |
| AGE01842-401 | TOOL-RIGGING LEADING EDGE | 6 | |
| AGE03544-401 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE03544-403 | SET - RIGGING TOOLS, FLAP | 3 | |
| APV7870-01-0 | RIGGING TOOL - TRANSLATING SLEEVE, T/R | 1 | |
| APV7870-01-0 | TRANSLATING COWL RIGGING TOOL issC | 1 | |
| APV7870-01-0 REV C | TRANSLATING COWL RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT56784-101 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT56784-102 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT56784-103 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27001 | SLAT RIGGING KIT TOOL | 1 | |
| B27001-27 | RIGGING, TOOL | 6 | |
| B27001-28 | RIGGING TOOL | 1 | |
| B27001-34 | RIGGING TOOL | 2 | |
| B27001-35 | RIGGING TOOL | 1 | |
| B27022 | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27022 REV B | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27022-16 | Holding tool-elev cable tension regulator rigging | 3 | |
| B27022-4 | Tension Regulator Rigging Tool | 3 | |
| B27023-14 | RIGGING TOOL | 1 | |
| B27023-47 | ELEVATOR AFT RIGGING BLOCK TOOL | 7 | |
| B27023-7 | ELEVATOR AFT RIGGING BLOCK TOOL | 1 | |
| B27039-28 | RIGGING CONTROLS STAB TRIM(KIT)TOOL | 9 | |
| B27039-29 | RIGGING CONTROLS STAB TRIM TOOL | 1 | |
| B27041-1 | RIGGING TOOL LEADING EDGE SLAT TRAVEL | 2 | |
| B27049-1 | AILERON RIGGING BROAD TOOL | 9 | |
| B3G1S83NI | ELEVATOR RIGGING TOOL | 1 | |
| B78006-2 | RIGGING TOOL - THRUST REVERSER | 3 | |
| C0006A | TOOL - TORQUE TUBE RIGGING ELEV. SYST (MV7627-5-14) | 1 | |
| C0014B | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C0015B | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C0043B | TOOL-CABLE PULLEY RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C01612001-001GT00-04 | SLAT RIGGING POSITIONING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27045-1 | SLAT RIGGING TOOL KIT | 19 | |
| C27045-1 | KIT - LE SLAT RIGGING TOOLS | 19 | |
| C27069-12 | TOOL RIGGING EQPT GROUND | 10 | |
| C27095 | Rigging Tool - Four Degree Speedbrake Lever Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27095-1 | RIGGING TOOL - FOUR DEGREE SPEEDBRAKE LEVER TOOL | 6 | |
| C27096-1 | Aileron rigging tool | 5 | |
| C6GT1047-1 | ELEVATOR RIGGING TOOL | 2 | |
| C76001-2 | CFM RIGGING PINS TOOL | 8 | |
| C84215-001 | BAR, HSTA, RIGGING TOOL | 5 | |
| CABLE RIGGING TOOL | CABLE RIGGING TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5815-1 | RIGGING TOOL, LOCK FACES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5815-2 | RIGGING TOOL, LH SENSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5815-2B | RIGGING TOOL - LH SENSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5815-7 | RIGGING TOOL, RH SENSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5815-7B | RIGGING TOOL - RH SENSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5824-2B | TOOL, RIGGING SENSOR (RH) | 3 | |
| CG9275207-0001 | FLAP RIGGING TOOLS KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CH1012-201 | RIGGING PIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CJMDS27-004 | FLAP RIGGING TOOL KIT | 1 | |
| COO45 | TOOL RIGGING DIAL GAUGE | 1 | |
| COO46 | TOOL RIGGING DIAL GAUGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D641P4001101 | TAIL ROTOR BLADE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D671P1052102 | MAIN ROTOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D671P7001951 | MAIN ROTOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D672P1051101 | RIGGING TOOL FENESTRON CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7347-1 | RIGGING TOOL CONTROL BUS CABLE FLAP | 1 | |
| E-C622G401101 | RIGGING TOOLS LEAD LAG DAMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EMB-00466-001 | MODULO RIGGING TOOL, HSTA 1 EA | 1 | |
| EMB-00683-001 | RIGGING TOOL ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F10A-5-P20900-13 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F616S32 | NOSE LANDING GEAR STEERING VALVE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F65-0-3045 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70207-109 | TOOL-RIGGING PIN KIT | 27 | |
| F70207-128 | RIGGING TOOL ASSY | 18 | |
| F70207-129 | Rigging Tool Assy | 3 | |
| F70261 | RIGGING TOOL -0 STABILIZER TRIM CONTROL USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70261-1 | RIGGING TOOL-STABILIZER TRIM CONTROL | 2 | |
| F72968-2 | I/B FLAP RIGGING TOOL | 2 | |
| F72968-3 | OUTBD FLAP RIGGING TOOL | 2 | |
| F72969 | RIGGING TOOL-RUDDER & RUDDER TAB. USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72969-1 | Rigging tool-rudder&rudder tab | 6 | |
| F72969-3 | RIGGING TOOL- RUDDEA | 3 | |
| F80134 | RIGGING TOOL ASSY DOOR LATCH ROLLERS | 2 | |
| F80134-1 | Rigging tool assy-door latch rollers,737&727-100,-200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-1 -2 -3 | RIGGING TOOL ASSEMBLY -DOOR LATCH ROLLERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-2 | RIGGING TOOL DOOR LATCH ROLLERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-3 | RIGGING TOOL DOOR LATCH ROLLERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-4 | RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-46 | RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-49 | RIGGING TOOL ASSY-DR LATCH ROLLERS USED TO SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80134-5 | Rigging tool assy-door latch rollers,737&727-100,-200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80209-1 | INBOARD FLAP RIGGING TOOLS | 10 | |
| F80256-1 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80256-10 | Rigging Tool - Landing Gear Valve Installation | 5 | |
| FE268-901 | ZERO LOCK TOOL - AILERON TENSION REGULATOR RIGGING | 4 | |
| FE268−901 | Zero Lock Tool − Aileron Tension Regulator Rigging | 4 | |
| FE300-901 | ZERO LOCK TOOL - ELEVATOR TENSION REGULATOR RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FE300901000 | Zero Lock Tool − Elevator Tension Regulator Rigging | 1 | |
| G27013-1 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27013-9 | TOOL - RIGGING, INBOARD KRUGER FLAPS NO. 11 – 16 SPL-5043 | 7 | |
| G27096-1 | RIGGING TOOL - SKEW SENSOR, TE FLAPS | 2 | |
| G32059-1 | LOCATING EQUIPMENT -AIR GAP RIGGING TOOL. WING LANDING GEAR | 2 | |
| G57006-1 | RIGGING BEAM TOOL | 4 | |
| G600-270001-69 | KIT RIGGING TOOL | 5 | |
| G600-270007-3 | TOOL PITCH TRIM ACTUATOR RIGGING - STUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G600-520006-71 | TOOL UPPER LATCH RIGGING | 1 | |
| G600-520009-39 | TOOL CENTER LATCH RIGGING DROP DOWN DOOR | 1 | |
| G600−520006−67 | Tool − Upper Latch Rigging | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G600−520006−71 | Tool − Upper Latch Rigging | 1 | |
| G600−520009−39 | Tool − Center Latch Rigging | 1 | |
| G601-780002-177 | KIT - THRUST REVERSER RIGGING TOOL | 6 | |
| G601-780002-181 | KIT THRUST REVERSER RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G601R272001-1 | AILERON RIGGING TOOL | 5 | |
| G601R521116-1 | PUSH PULL ROD RIGGING TOOL | 2 | |
| G601R523100 | RIGGING TOOL - AFT BAGGAGE-BAY DOOR COUNTERBALANCE-SPRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G601R523100-1 | CARGO DOOR RIGGING TOOL | 4 | |
| G601R523100−1 | Rigging Tool − Aft Baggage−Bay Door Counterbalance−Spring | 4 | |
| G601R783202-1 | RIGGING TOOL KIT THRUST REVERSER | 10 | |
| G601R783202−1 | TOOL KIT − THRUST REVERSER RIGGING | 10 | |
| G601−780002−177 | KIT − THRUST REVERSER RIGGING TOOL | 6 | |
| G670-271000-1 | DIGITAL PROTRACTOR - AILERON RIGGING TOOL | 2 | |
| G670-272000-1 | TOOL, BOX, RIGGING | 2 | |
| G670271000-1 | Digital Protractor ? Aileron Rigging Tool | 2 | |
| G670271000−1 | Digital Protractor − Aileron and Flap Rigging Tool | 2 | |
| G67027240-1 | RUDDER RIGGING AND NEUTRAK POSITION TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G670272401 | RUDDER RIGGING AND NEUTRAK POSITION TOOL KIT1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G8DHC761004-1 | TOOL, PLA RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712002 | TOOL AILERON RIGGING | 1 | |
| GSB2712003 | AILEROIN RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712004 | TOOL-TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2712005 | TOOL-TRIM TAB RIGGING DRAWING AND MYLAR TEMPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| GSB2715001-IAS | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715002 | TOOL - RIGHT GEAR TAB RIGGING | 3 | |
| GSB2715002-IAS | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2715003 | L/H ELEVATOR TAB RIGGING TOOL | 2 | |
| GSB2715003-IAS | ELEVATOR RIGGING TOOL, R/H | 1 | |
| GSB2715004 | R/H ELEVATOR TAB RIGGING TOOL | 1 | |
| GSB2715004-IAS | ELEVATOR RIGGING TOOL, R/H | 1 | |
| GSB2715005 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 5 | |
| GSB2715005-IAS | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
| GSB2733002 | CONTROL COLUMN RIGGING TOOL | 4 | |
| GSB5200001 | Rigging Tool L.H-Aft Baggage Door Latch | 3 | |
| GSB5200002 | RIGGING TOOL R.H. AFT BAGGAGE DOOR LATCH | 3 | |
| GSB7610001 | TOOL-POWER LEVER RIGGING | 1 | |
| GSB7610002 | TOOL-CONDITION LEVER RIGGING | 1 | |
| GSB7610003 | TOOL-PLA RIGGING | 2 | |
| GSE088 | MODULO RIGGING TOOL, HSTA 1 EA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE146 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE239 | TOOL - RIGGING, LEADING EDGE SLATS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56785 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56785-101 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56785-102 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56785-103 | RIGGING TOOL-PROXIMITY SENSORS,BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE702004-001 | FLAP RIGGING TOOLING | 2 | |
| H21974 | RIGGING TOOL | 1 | |
| HC131H0077-000 | FLAP RIGGING TOOL | 4 | |
| J27017-19 | FLAPERON RIGGING TOOL | 10 | |
| J27020-1 | FLAP RIGGING TOOL | 9 | |
| J27096-1 | FLAPERON RIGGING TOOL, SECTION 13 | 6 | |
| J27126-1 | RIGGING TOOL AILERON | 4 | |
| J52013-1 | Kit - Tool, Fwd/Aft Cargo Door Rigging Adjustment | 6 | |
| J52013-1-M | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52041-1 | GAGE-GO/NO-GO，FWD CARGO DOOR RIGGING ADJUSTMENT TOOL | 5 | |
| K27022-39 | RIGGING TOOL | 6 | |
| K27030-95 | RIGGING TOOL | 8 | |
| K27037-77 | RIGGING TOOL | 4 | |
| K27054-1 | Rigging tool-elevator | 4 | |
| K27054-1-REVA | RIGGING TOOL ELEVATOR | 1 | |
| K27055 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-1 | RIGGING TOOL - RUDDE | 4 | |
| K27055-2 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-4 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-5 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-6 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-7 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27055-9 | RIGGING TOOL-RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27058- | RIGGING TOOL-SLAT SKEW DETECTION CABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27058-1 | Rigging Tool -Slat Skew Detection Cable | 7 | |
| K27062 | RIGGING TOOL-DROOP PANEL TO INBD FLAP FILLET FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27062-1 | Rigging Tool - Drop Panel | 7 | |
| K27063-1 | RIGGING TOOL, HSTA NULL POSITION | 2 | |
| K27064-1 | RIGGING TOOL - FLAPERON | 1 | |
| K52014 | TOOL KIT-CARGO DOOR RIGGING ADJUSTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52014-1 | Tool Kit, Cargo Door Rigging Adjustment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52014-42 | TOOL KIT - CARGO DOOR RIGGING ADJUSTMENT | 6 | |
| K52052 | RIGGING TOOL SET-LATCH FITTING NUTS,CREW ESCAPE DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52052-1 | RIGGING TOOL SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LJ015U1310-5 | LOCATING JIG - AIR GAP RIGGING TOOL, WING LANDING GEAR | 2 | |
| M65725858 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M65725910 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M65725913 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M65726731 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU74791 | TOOL, RIGGING-LINE TRANSFER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT5-97815 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT61B10010 | Nose cargo door portal latch ftg，rigging tool | 2 | |
| MIT65-45116 | RIGGING TOOL | 16 | |
| MIT65B90238 | MISCELLANEOUS TOOL RIGGING - TRANSDUCER INSTALLATION, LINEAR POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT050-1 | MAIN ROTOR RIGGING TOOL | 1 | |
| MT050-1/PHP | MAIN ROTOR RIGGING TOOL | 1 | |
| MT050-2 | TAIL ROTOR RIGGING TOOL | 1 | |
| MT050-2/PHP | TAIL ROTOR RIGGING TOOL | 1 | |
| MT525-1 | RIGGING TOOL - MR BLADE | 2 | |
| MT525-2 | RIGGING TOOL - TR BLADE | 2 | |
| O110455 | Rigging Tool | 1 | |
| OU190864 | Rigging Tool THS | 8 | |
| OU191068 | Output rigging tool | 9 | |
| PWA88016 | SPACER BLOCKS FIELD RIGGING TOOL | 2 | |
| PWA88017 | CALIPERS FIELD RIGGING TOOL | 2 | |
| PWA88440 | RIGGING TOOL (20 PC | 4 | |
| PWC 38268-B | ENGINE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC38268 | ENGINE RIGGING TOOL | 10 | |
| PWC60802 | RIGGING TOOL | 4 | |
| PWC60899 | RIGGING TOOL | 2 | |
| PWC67675 | RIGGING TOOL | 5 | |
| RB T101291-103 | Swashplate Rigging Tool | 1 | |
| RB T101740 | Rigging Tool | 1 | |
| RB T101751-101 | Tail Rotor Blade Rigging Tool | 1 | |
| RB T102019 | Rigging Tool | 1 | |
| RB T102094 | Rigging Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T102096 | Servo Actuator Collective Rigging Tool Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103206-101 | TAIL ROTOR RIGGING TOOL | 1 | |
| RB T103262-101 | Rigging Tool | 1 | |
| RB T103281-101 | RIGGING TOOL, CYCLIC ALTERNATE | 1 | |
| RB T103281-102 | RIGGING TOOL, CONTROL ALTERNATE | 1 | |
| RB T103356-101 | Tool Rigging | 1 | |
| RBA9927-3 | COLLECTIVE RIGGING, TOOL RH COMMAND | 1 | |
| RBA9929-9 | Long. Rigging Tool | 1 | |
| RBA9931-5 | Rigging Tool | 1 | |
| RBD29929-9 | Rigging Tool Long -"D" Model LH Command | 1 | |
| RBD29931 | TAIL ROTOR RIGGING TOOL (2 BLADED) | 1 | |
| RBD29931E | TAIL ROTOR RIGGING TOOL | 1 | |
| RBE350A94-3701-00 | 7° MAIN ROTOR RIGGING TOOL | 1 | |
| RBEA62410 | Main Rotor Rigging Tool Kit | 1 | |
| RBEA62410P | MAIN ROTOR RIGGING TOOL KIT | 1 | |
| RBH9925 | COLLECTIVE RIGGING TOOL | 2 | |
| RBT102019 | RIGGING TOOL | 1 | |
| RBT400227 | SWASHPLATE RIGGING TOOL | 1 | |
| RBT400263 | DIRECTIONAL RIGGING TOOL | 2 | |
| RBT400264 | TOOL ASSEMBLY. DIRECTIONAL RIGGING (412EP) | 1 | |
| RBT400353 | LATERAL RIGGING TOOL 407 | 2 | |
| RBT400354 | LONGITUDINAL RIGGING TOOL 407 | 2 | |
| SA610 | TOOL - DYNAMIC RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SD12556-3 | FCU RIGGING TOOL | 2 | |
| SE1511 | TOOL ELEVATOR RIGGING | 4 | |
| SLS-200-012-001 | CYCLIC AFT AND CENTER RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SLS-200-013-001 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SLS-200-018-001 | KITTED COLLECTOR TAIL ROTOR RIGGING TOOL KIT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-741 | RIGGING TOOL - FORWARD DOOR ASSY, NLG // P/N 3981315-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101291-102 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101291-103 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101330 | M/R RIGGING TOOL | 1 | |
| T101740 | T/R BLADE RIGGING TOOL | 2 | |
| T101751 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101751-101 | TAIL ROTOR BLADE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T102019 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103206 | RIGGING TOOL TAIL ROTOR CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103206-101 | TAIL ROTOR RIGGING TOOL | 1 | |
| T103262-101 | SWASHPLATE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103281-101 | CYCLIC CORNER STOP RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103281-102 | CYCLIC CORNER STOP RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103286-101 | CYCLIC MIXING BELLCRANK RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103287-101 | TOOL ASSEMBLY, RIGGING CYCLIC CONTROLS | 1 | |
| T103287-111 | RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103288-101 | TOOL ASSEMBLY, CYCLIC CONTROLS RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103296 - 101 | ELEVATOR RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103296-101 | ELEVATOR CONTROL TUBE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103347-101 | CYCLIC STICK RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T103356-101 | TOOL ASSEMBLY, CYCLIC CONTROLS POSITION SENSOR RIGGING | 2 | |
| TE-100TB | FLIGHT CONTROL RIGGING TOOL | 1 | |
| TE65-51515-1 | RIGGING TOOL-LANDING GEAR VALVE INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73720-1 | SUB ASS'Y RIGGING TOOL | 1 | |
| TE65-73720-1 -2 | Test Equipment -Rigging Tool. Outboard Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73720-2 | SUB ASS'Y RIGGING TOOL OTBD | 1 | |
| TE65-737201-1 | TOOL INBOARD FLAP RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-737201-2 | TEST EQUIPMENT -RIGGING TOOL. OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEM-761000-001 | ENGINE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TN-315977 | RIGGING TOOL | 3 | |
| TN315977 | RIGGING TOOL | 3 | |
| TN462190 | AILERON CABLE RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOOL | TOOL RUDDER RIGGING | 2 | |
| TOOL RUDDER RIGGING | TOOL RUDDER RIGGING | 1 | |
| WT-107901 | SPACER TOOL RIGGING | 2 | |
| WT107901 | RIGGING TOOL, SPACER | 2 | |
| Z0110455 | Rigging Tool | 1 | |
| ZT25-002-03 | DUMMY CONTAINER RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ZT25-002-11 | DUMMY CONTAINER RIGGING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| f 70261-1 | Rigging Tool-Stabilizer Trim Control | 2 | |
| f70261-1 | Rigging Tool-Stabilizer Trim Control | 2 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
