| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 79B050074 | LOCK SIDE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 14-6847-6000 | PIN, GND LOCK SIDE BRACE | 3 | |
| 14ME65-72761-1 | MLG SIDE STRUT DOWNLOCK OPEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 214FC | SET, WRENCH, CROWFOOT OPEN END WITH SIDE LOCK HOLE | 2 | |
| 3ME65B05730-1 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY LEFT SIDE | 7 | |
| 3ME65B05730-2 | OUTBOARD ELEVATOR ACTUATOR LOCK ASSY RIGHT SIDE | 7 | |
| 69741-1 | SPACER BLOCK (LEFT SIDE) D30665-SERIE CMM 25-61-20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 69741-3 | SPACER BLOCK (RIGHT SIDE)D30665-SERIE CMM 25-61-20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70198-101 | ASPIRATOR SPACER BLOCKS LEFT SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70198-103 | ASPIRATOR SPACER BLOCKS LEFT SIDE | 1 | |
| 8-27236A | BLACK SIDE LOCK BAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 82693-10 | SIDE LOCK ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8927 | Replacement Lock Chucks ( Type: T-Handle )( Thread: .485"-26 )( Side Hose Connector: 3/8"-24 ) | 4 | |
| 9043 | Replacement Lock Chucks ( Type: T-Handle )( Thread: .305"-32 )( Side Hose Connector: 3/8"-24 ) | 3 | |
| 460005837 | LOCKING BAR SIDE STAY LEFT HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460007325 | LOCK SIDE STAY | 7 | |
| 2143E4530 | GROUND LOCK PIN.SIDE STAY ASSY.WING LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2144E5506 | GROUND LOCK PIN.SIDE STAY ASSY.WING LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D2790 3500 000 | PIN SIDE STICKING LOCKING | 37 | |
| 98D27903500 | PIN SIDE STICK LOCKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27903500000 | PIN- SIDE STICK LOCKING | 37 | |
| 98D279035000000 | PIN SIDE STICK LOCKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L27901001000 | PIN # PIN,LOCKING-SIDE STICK | 10 | |
| 98L279010010000 | SIDE STICK LOCK | 1 | |
| 98S51605001-206 | MINI ANGLE BEAM ALUMINUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 3 | |
| 98S51605001-208 | MINI ANGLE BEAM BLOCK CS V2 BLOCK..½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | 2 | |
| A32063-7 | TEST FIXTURE-SIDE AND DRAG BRACE LOCK ACTUATORS | 1 | |
| AFNDT-2050AL | MINI ANGLE BEAM ALUMINUM V2 Calibration Block, 7075 Aluminum, Metric (Side Drilled Hole Thickness - 12.5mm. Includes Certificate of Conformance and Material Certification Report. Supplied with wood case. | 1 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3119TI | Titanium Dynamic Split Hole Reference Block. Material: 6Al-4v Titanium. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/- .... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-DAC/1018 | Used for establishment of primary reference responses for UT examination of..welds. Block contains three DAC side-drilled holes at 1.5” deep minimum at..diameters between 3/32” and 1/4” depending on the block thickness (T). Hole..locations through the ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-IIW-01CS | IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AFNDT-ROMPAS-7075-T6 | ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FA276-01821 | TOOL, SIDEWALL MASK LOCKER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28019-27 | SIDE CLAMP BLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28019-51 | SIDE CLAMP BLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS-18008 | OUTSIDE CALIPERS. LOCK JOINT TYPE. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ITCSLHR-BK01 | HERITAGE SIDE LOCKER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32013 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32013-1 | SIDE STRUT ADJUSTMENT EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 11 | |
| J32013-13 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | 1 | |
| J32018 | ADJUSTMENT EQPT DOWNLOCK STOP MLG SIDE & DRAG STRUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32018-14 | ADJUSTMENT EQUIPMENT - DOWNLOCK STOP, MAIN LANDING GEAR SIDE AND DRAG STRUTS | 12 | |
| J32018-19 | ADJUSTMENT EQUIPMENT, MLG SIDE AND DRAG STRUTS DOWN LOCK STOP | 11 | |
| J32018-28 | ADJUSTMENT EQPT - DOWNLOCK STOP, MLG SIDE & DRAG STRUTS | 2 | |
| J32037-8 | FITTING ASSY,SIDE STRUT/LOCK LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55004-7 | Lock Assy, Inbd Side | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55004-8 | LOCK ASSY,OUTBD SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32018 | SIDE STRUT ADJUSTING EQPT- DRAG STRUT LOCK LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32018-35 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32018-42 | Side Strut Adjusting Eqpt - Drag Strut Lock Link | 1 | |
| K32018-59 | SIDE STRUT ADJUSTING EQPT-DRAG STRUT LOCK LINK ASSY，MLG | 2 | |
| K55001-8 | LOCK ASSY,INBD SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55001-9 | LOCK ASSY,OUTBD SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KRBL2-BNG | LOCK BAR W/SIDE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5L1PG3 | 1-POINT SIDE LOCKER LOCK KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L5L3PG3 | 3-POINT SIDE LOCKER LOCK KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MAB-CS | ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note: | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-1278 | BLOCK - LOADING, 1/8 INCH THICK, 3 INCH BY 3 INCH WOOD OR FIBERGLASS BLOCK WITH PAD TO PREVENT DAMAGE TO THE SKIN. STD-1278 HOSE - VACUUM, 1/4 INCH INSIDE DIAMETER (ID) PLASTIC TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V2-AL | MINI ANGLE BEAM ALUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V2-CS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version).1018 Carbon Steel with form fitted case | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V2-SS | MINI ANGLE BEAM BLOCK CS V2 BLOCK.½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). ..304 Stainless Steel with case | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
