RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
F80027-18 | Lock Eqpt - Horizontal Stabilizer | 18 | |
(CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K27046-15 | LOCK EQPT - ELEVATOR PCU (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
420207-1 | Cable Tens Reg Lock Eqpt | 1 | |
420324 | CABLE TENS REG LOCK EQPT | 3 | |
98S27005016000 | CABLE TENS REG LOCK EQPT | 2 | |
A27021-69 | CONTROL COLUMN LOCK EQPT. | 12 | |
A27037-1 | Test Eqpt - Lockout Mechanism Outboard Aileron | 1 | |
A27104 | LOCK EQPT ELEVATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27111 | LOCK EQPT-ELEVATOR ACTUATOR | 1 | |
A27111-1 | ELEV. ACT. LOCK EQPT | 3 | |
A27111-11 | ELEVATOR ACT. LOCK EQPT | 14 | |
A27115-45 | Test Eqpt - Outboard Aileron Lockout Acutator | 4 | |
A27118-111 | LOCK EQPT - INBOARD AND OUTBOARD TE FLAP LINKAGE | 2 | |
A27118-90 | Lock Eqpt - Inboard and Outboard TE Flap Linkage | 2 | |
A27130-1 | EQPT - LOCKOUT, SLAT PDU | 2 | |
A32086-1-M | JIG EQPT- DOWNLOCK STOP SHIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32114-1 | LOCK EQPT - MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32114-102 | TRUCK POSITION RETAINER & OLEO LOCK EQPT-MLG | 2 | |
A55001-22 | LOCK EQPT HORIZONTAL STABLIZER | 13 | |
A55001-47 | TEST EQPT LOCK | 9 | |
B27009-12 | 757-LOCK OUT EQPT PCU ELEVATOR | 20 | |
B27013-20 | LOCK EQPT -0 RUDDER PCU | 13 | |
B27014-20 | Lock Eqpt-Out'b TE Flap | 10 | |
B27016-37 | LOCK EQPT.-INBD T/E FLAP | 11 | |
B27023 | RIGGING BLOCK EQPT-ELEVATOR AFT QUADRANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27023-47 | Rigging Block Eqpt - Elevator Aft Quadrant | 7 | |
B32012-32 | BOX LOCK EQPT DOOR ACUCTOR MAIN LANDING GEAR | 7 | |
B32012-45 | LOCK EQPT -0 MLG DOOR ACTUATOR | 22 | |
B32013-17 | ACTUATOR LOCK EQPT | 16 | |
B32013-17-M | ACTUATOR LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32028 | LOCK EQPT -0 SHOCK STRUT, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32028-1 | MLG SHOCK STRUT LOCK EQPT. | 10 | |
B32028-21 | LOCK EQPT - MLG | 4 | |
B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32030-1 | Fixture-lock actuator,overhaul eqpt,NLG | 3 | |
B78001-43 | Lock Eqpt - Thrust Reverser Isolation Valve | 4 | |
B78009-21 | LOCK EQPT. T/R LEVER | 7 | |
B78009-26 | ELECTRICAL LOCK EQPT | 22 | |
B78009-26-E | ELECTRICAL LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B78010-28 | STAND-FUNCTIONAL TEST EQPT LOCKING&NON-LOCKING THRUST REVERSER | 11 | |
B78013-1 | Overhaul eqpt-T/R locking actuator assy | 6 | |
B78013-2 | Overhaul eqpt-T/R locking actuator assy | 3 | |
B78017-1 | Installation eqpt-bearing-lead screw T/R non-locking actuator assy | 9 | |
C12006-14 | LOCK EQPT.-AILERON FULL-UP LUBRICATION | 6 | |
C27008 | LOCK EQPT ACTUATION CONTROL FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27008-14 | Lock Eqpt Flap Actuator | 4 | |
C27008-20 | Lock Eqpt - Actuation Control Flap | 10 | |
C27008-22 | LOCK EQPT. ACT CONTROL FLAP | 16 | |
C27019-1 | Tab Bending Eqpt-Locking Washer-Le Slat Actuator | 3 | |
C27059-1 | TEST BLOCK EQPT - LE FLAP & SLAT ACTUATOR | 3 | |
C27066 | LOCK EQPT AILERON/ELEVATOR PCU INPUT ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27066-1 | LOCK EQPT-AILERON / ELEVATOR | 24 | |
C27069 | RIGGING EQPT-INTERLOCK VALVE CABLE,GROUND SPOILER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27069-12 | RIGGING EQPT-INTERLOCK VALVE | 10 | |
C27069-20 | RIGGING EQPT - INTERLOCK VALVE CABLE, GROUND SPOILER | 10 | |
C32026 | DOWNLOCK EQPT - NLG AND MLG * FLYAW | 1 | |
C32026-1 | DOWNLOCK EQPT - NLG AND MLG ***** FLYAWAY EQUIPMENT ***** (CONTAINS 3 LOCK ASSEMBLIES) | 26 | |
C32026-12 | EQPT DOWNLOCK | 7 | |
C32026-15 | Downlock EQPT NLG and MLG | 12 | |
C32026-2 | DOWNLOCK EQPT | 14 | |
C32026-2-F | DOWNLOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32026-6 | Downlock eqpt-NLG and MLG | 13 | |
C78004 | LOCKPIN EQPT-THRUST REVERSER TRANSLATING SLEEVE,CFM56-3ENG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78004-1 | Lockpin eqpt-thrust reverser translating sleeve,CFM56-3 engine | 28 | |
C78004-2 | Lockpin Eqpt - Thrust Reverser Translating Sleeve | 26 | |
C78004-2-F | PIN LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78009-21 | T/R MAINTENANCE LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C78012-1 | LOCK OUT EQPT T/R | 4 | |
C78023-1 | LOCK EQPT- T/R ACTUATOR CFM56 | 32 | |
C78023-13 | LOCKEQPT | 5 | |
C78029-3 | Block Eqpt | 2 | |
C78035-1 | LOCK EQPT - THRUST REVERSER OPENING ACTUATORS | 11 | |
C78035-14 | LOCK EQPT - THRUST REVERSER ACTUATO | 9 | |
F72735-13 | GROUND LOCK ASSY - NOSE WHEEL STEERING - 737-200,300,400,500 * FLYAWAY EQPT * | 24 | |
F73012-1 | Swaging eqpt-roller,lock actuator barrel,main landing gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80027 | LOCK EQPT-HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80027-18 | LOCK EQPT-HORIZONTAL STABILIZER | 18 | |
F80027-18U | LOCK EQPT, UPGRADED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80027-41 | LOCK EQPT - HORIZONTAL STABILIZER | 9 | |
F80027-44 | LOCK EQPT-HORIZONTAL STABILIZER | 7 | |
G27001 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 5 & | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27001-1 | Lock open eqpt-inbd spoiler actuatior NO.5 & NO.8 | 10 | |
G27002 | LOCK OPEN EQPT -0 INBD SPOILER ACTUATOR NO. 6 & | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27002-1 | LOCK OPEN EQPT | 9 | |
G27008 | LOCK EQPT -0 RUDDER ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27008-19 | Lock eqpt-rudder actuator | 8 | |
G27008-41 | Lock Eqpt-Rudder Actuator | 3 | |
G27032-8 | ACTUATOR LOCK EQPT | 9 | |
G27037-13 | Lock Eqpt- TE Flap System | 7 | |
G27039 | TEST JIG EQPT -0 LOCKOUT MECHANISM, OUTBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27039-1 | Test Jig Eqpt - Lockout Mechanism Otbd Aileron | 1 | |
G27054-1 | LOCK EQPT - INBOARD AILERON | 1 | |
G27057-1 | Lock Open Eqpt | 2 | |
G27063-69 | Lock Eqpt-TE Flaps and Carriages | 2 | |
G27063-76 | Lock eqpt-te flaps and carriages | 6 | |
G27065-18 | Lock eqpt-outboard aileron pcu | 3 | |
G29012-1 | Protective eqpt-up locked position,ram air turbne | 2 | |
G32036 | PIN ASSY EQPT -0 GROUND LOCK, NOSE LANDING GEAR | 1 | |
G32036-1 | PIN ASSY EQPT-GROUND LOCKN+ÃNOSE LANDING GEAR | 8 | |
G32036-2 | Pin assy eqpt-ground lock,nose landing gear | 5 | |
G32048-38 | LOCK EQPT-DOOR BODY LAND. GEAR | 2 | |
G32048-41 | LOCK EQPT - DOOR BODY LANDING GEAR | 5 | |
G32049-1 | Lock eqpt-door,wing landing gear | 6 | |
G38004-13 | BLOCKAGE REMOVAL EQPT. LAV. SYS. | 15 | |
G38004-6 | BLOCKAGE RMVL EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G38006 | BLOCKAGE REMOVER EQPT-VACCUM WASTE SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G38006-1 | BLOCKAGE REMOVAL EQPT. + GUAGE | 14 | |
G71038-13 | Unlock pole eqpt-fan cowl hold open rod | 7 | |
J27005-34 | LOCK EQPT - SPOILER | 1 | |
J27005-48 | Lock eqpt-inbd/outbd,spoiler actuator | 9 | |
J27028-14 | LOCK EQPT.-ELEVATOR AND RUDDER PCU | 15 | |
J27028-21 | LOCK EQPT.-ELEVATOR AND RUDDER PCU | 11 | |
J27028-38 | LOCK EQPT.-ELEVATOR AND RUDDER PCU | 5 | |
J27035 | LOCK EQPT-FLAP WITH TRANSMISSIONS REMOVED | 1 | |
J27035-1 | LOCK EQPT-PLAP | 2 | |
J27035-40 | LOCK EQPT-FLAP WITH TR/MISSION RMVL | 3 | |
J27035-40-INC | INCOMPLETE LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27035-41 | LOCK EQPT ADAPTER | 2 | |
J27035-52 | LOCK EQPT-PLAP | 2 | |
J27035-55 | Lock eqpt-Glap with transmissions removed | 5 | |
J27035-55-HM | HYDRO MFD PARTS -0 LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27035-57 | Lock eqpt-flap with transmissions removed | 1 | |
J27035-58 | Lock eqpt-flap with transmissions removed | 1 | |
J27035-59 | LOCK EQPT FLAP | 6 | |
J27035-59U | LOCK EQPT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27067-9 | SHAFT LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32011 | DOWNLOCK EQPT-NLG & MLG | 1 | |
J32011-3 | Downlock eqpt-NLG & MLG | 17 | |
J32011-4 | DOWNLOCK EQPT - NLG | 12 | |
J32011-7 | DOWNLOCK EQPT - NLG | 14 | |
J32013 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32013-1 | Side Strut Adjustment Eqpt - Drag Strut Lock Link Assy, MLG | 11 | |
J32013-13 | SIDE STRUT ADJUSTMENT EQPT-DRAG STRUT LOCK LINK ASSY, MLG | 1 | |
J32018 | ADJUSTMENT EQPT DOWNLOCK STOP MLG SIDE & DRAG STRUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32018-14 | Adjustment eqpt-downlock stop MLG side & drag struts | 12 | |
J32018-19 | Adjustment eqpt-downlock stop MLG side & drag struts | 11 | |
J32018-28 | ADJUSTMENT EQPT - DOWNLOCK STOP, MLG SIDE & DRAG STRUTS | 2 | |
J32028 | LOCK PIN EQPT-MLG & NLG DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32028-1 | LOCK PIN EQPT | 11 | |
J32032-23U | UPGRADE LOCK EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32063 | LOCATING EQPT - UPLOCK ROLLER, MLG DOOR | 1 | |
J32063-1 | LOCATING EQPT - UPLOCK ROLLER, MLG DOOR | 8 | |
J32064 | OVERHAUL EQPT - UPLOCK ASSEMBLY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32064-1 | OVERHAUL EQPT - UPLOCK ASSEMBLY, MLG | 3 | |
J78006-1 | HOLD OPEN EQPT - T/REV. LOCK | 8 | |
J78006-11 | HOLD OPEN EQPT - T/REV. LOCK | 10 | |
K27019-56 | Lock Eqpt - Trailing Edge Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27019-70 | Lock Eqpt - TE Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27046-15 | Lock eqpt-elevator pcu | 5 | |
K27046-21 | Lock Eqpt - Elevator PCU | 1 | |
K27046-31 | LOCK EQPT-ELEVATORPCU | 2 | |
K27046-42 | LOCK EQPT - ELEVATOR PCU | 4 | |
K27046-51 | LOCK EQPT - ELEVATOR PCU | 5 | |
K27061 | Lock-out Eqpt, Spoiler Electro Mechnical Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27061-1 | EQPT - LOCKOUT, SEMA SPOILER | 9 | |
K27061-1 | LOCK-OUT EQPT-SPOILERELECTRO MECHANICAL ACTUATOR | 9 | |
K32003-1 | Spring rmvl/instl eqpt-MLG uplock and MLG door uplock | 3 | |
K32018 | SIDE STRUT ADJUSTING EQPT-DRAG STRUT LOCK LINK ASSY,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K32018-1 | MLG Drag Strut Lock Link Adjustment Eqpt | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K32018-35 | Side Strut Adjusting Eqpt - Drag Strut Lock, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K32018-42 | Side Strut Adjusting Eqpt - Drag Strut Lock Link | 1 | |
K32018-59 | SIDE STRUT ADJUSTING EQPT-DRAG STRUT LOCK LINK ASSY,MLG | 2 | |
K32026-1 | Locating Eqpt - Uplock Roller, MLG Door | 3 | |
L25002-1 | Lockpin Check Eqpt - Crew Seat Track | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L32001-1 | OVERCENTER EQPT - LOCK LINK, NLG | 1 | |
В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.