| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 14010AT1 | LAP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE10244 | LAP TOOL | 1 | |
| AGE13472 | LAP TOOL | 1 | |
| AGE14039 | Lap tool | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 201204-CA | FLAP ACTUATOR DRAIN TOOL Same as P/N 98S27505001000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 97L57508828000 | TOOL DRILL TOOL-FLAP FAIRING DRIVE B (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 97L57508828001 | TOOL DRILL TOOL-FLAP FAIRING DRIVE T (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D57304005000 | FLAP HNGE BORING TOOL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F27501002005 | FLAPPCU FLAP PCU-R I TOOL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F27503000000 | FLAPPCU FLAP PCU-R I TOOL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F27508390000 | TOOL TOOL - ADJUSTMENT, INBOARD FLAP (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L27508651000 | TOOL-SHARK FIN,FLAP (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L27508651001 | TOOL-SHARK FIN,FLAP (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L27801001000 | LOCKNGTL LOCKING TOOL-FLAP SLAT CONTROL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S27005014000 | FLAP JACK LOCKING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S27505001000 | FLAP ACTUATOR DRAIN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) CHA141478 | BACKLASH BACKLASH CHECKING TOOL - FLAP S (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) FPK-PRO-104 | FLAP PEENING TOOL KIT (CALIBRATION) | 1 | |
| (CALIB) LLA537A204 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) LLA547A108 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) LLA547A194 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 04-256-F | 37 DEGREE DOUBLE LAP FLARING TOOL | 2 | |
| 1045906-001 | DIAPHARGM INSTALLATION TOOL OVERLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10ME65B01900 | EXTRACTION TOOL -0 OUTBD FLAP | 4 | |
| 10ME65B02000 | EXTRACTION TOOL - INBOARD FLAP (CARRAIGE BEARING) | 4 | |
| 10ME65B02000-M | EXTRACTION TOOL INBRD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1159SCGSE101 | FLAP ACTUATOR OUTPUT FORCE MEASURING TOOL | 1 | |
| 1159SCGSE101-1 | FLAP ACTUATOR OUTPUT FORCE MEASURING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12245-013-001 | BUSH REMOVAL / INSTALL TOOL FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12245-058-001 | FLAP RIGGING TOOL BOARD SET | 2 | |
| 12ME65B02000 | EXTRACTION TOOL - INBOARD FLAP CARRAIGE BEARING | 8 | |
| 12MIT65B04017 | KRUGGER FLAP RIG TOOL | 2 | |
| 14PF465TOOLM | TOOL, ADAPTOR FLAP/SLAT DRIVELINE MAL SPLINE | 4 | |
| 18D12373-1 | TOOL SET, FLAPERON FITTING BUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18ME6500116 | FLAP HOIST TOOL KIT INB TRALING EDGE B747-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1900790 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 190T05980-401 | GSE 146 SET - RIGGING TOOLS, FLAP | 1 | |
| 1949-0027NK | DUMMY CONNECTOR APU AIR INTAKE FLAP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 196T07770-401 | TOOLS, RIGGING - INBOARD FLAP | 1 | |
| 196T07770-403 | FLAP RIG TOOL SET | 1 | |
| 196T09300-401 | TOOLS, RIGGING-OUT-BOARD FLAP | 1 | |
| 196T09300-405 | TOOLS, RIGGING-OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1OME65B02000-M | EXTRACTION TOOL INBRD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1X56176802 | TOOL-REPLACE,SEMIFLUID OF FLAP ACTUATOR | 6 | |
| 1X56176802 | TOOL REPLACE SEMIFLUID OF FLAP ACTUATOR | 6 | |
| 201204-CA | Flap Actuator Drain Tool | 2 | |
| 201204CA | FLAP ACTUATOR DRAIN TOOL | 2 | |
| 22479-T202 | LAPPING TOOL | 2 | |
| 22479T202 | LAPPING TOOL | 2 | |
| 22479T203 | Lapping Tool | 1 | |
| 262724 | Lapping Tool, Hand Bushing | 1 | |
| 262724PM | BEARING LAPPING TOOL | 1 | |
| 287459-1-1 | Bearing Lapping Tool | 1 | |
| 291115-1 | Bearing Lapping Tool Driver | 1 | |
| 294240 | LAPPING-TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 294240-2 | HAND LAPPING TOOL | 1 | |
| 294240-3 | HAND LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14252G01 | HPTR ROTOR DISK/SHAFT LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B00116 | RIGGING TOOL - ECCENTRIC FOREFLAP SEQUENCE MECHANISM, INBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B04008 | TOOL I/B T/E FLAP DR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| 2TE65-73720-1 | Tool - Inboard Flap Rigging | 1 | |
| 2TE65-73720-2 | Tool - Inboard Flap Rigging | 1 | |
| 2TE65B04017-1 | RIGGING TOOL - KRUEGER FLAPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A93-3111-00 | FLAPPING AXIS HAFTING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
| 3403149-1 | FLAP JACKSCREW BALL NUT INSPECTION TOOL | 2 | |
| 35-92018-0007 | TOOLS KIT FOR FLAPS CONTROLS | 1 | |
| 35-92179-0001 | ADJUSTMENT TOOL FOR RUDDER COMPENSATOR FLAP | 1 | |
| 3A2983 | FLAPPER PLATE GASKET ASSEMBLY ALIGNMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2983-8 | ALIGMENT TOOL, FLAPPER PLATE GASKET ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A2983-9 | ALIGNMENT TOOL FLAPPER PLATE GASKET ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G1005G00732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G1005G01732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4110302-002 | LAPPING PISTON TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 429-201-007-101 | TAIL ROTOR FLAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4411A0000K01 | TOOL-REPLACE,SEMIFLUID OF FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4455A0000-01 | TOOL-REPLACE,SEMIFLUID OF FLAP ACTUATOR | 2 | |
| 4455A0000-01-2 | TOOL-REPLACE,SEMIFLUID OF FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4455A0000-01 | TOOL REPLACE FLUID FLAP ACTUATOR | 2 | |
| 488200GSE1-1001 | LOCKING TOOL-FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 488200GSE1-1001 | LOCKING TOOL-FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4AJ65B83853 | CLEARANCE CHECK TOOL - TRAILING EDGE FLAP TRANSMISSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4FLAPGBOXREMPLUGKIT | #4 FLAP GEAR BOX REM/PLUG KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4MIT65B04008 | Lubrication tool set-t.e.flapcarriage roller | 8 | |
| 53-256-FK | USATCO 37° Single & Double Lap Flaring Tool Kit ( Includes 1: Flaring Tool, Inner-Outer Ream Tubing Cutter, Carr ) | 2 | |
| 53172-2001 | Flap Spline Tool | 3 | |
| 540064 | LAPPING TOOL FOR VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 550T05659-401 | PRAETOR 600 FLAP RIGGING TOOLING | 1 | |
| 55914S0000 | A300-600 FLAP SHAFT ALIGNMENT TOOL | 1 | |
| 59606AT1 | LAP TOOL, PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 59683A0000-01 | FLAP SCREW NOZZLE TOOL | 5 | |
| 60P275300*N001PRC | FLAP ACTUATOR SUPPORT TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65492T201 | Lapping Tool | 1 | |
| 66047 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 755216 | LUBRICATING TOOL - FLAP ACTUATOR SERIES 755216 | 1 | |
| 6723060 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6723061 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6723062 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6723089 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6723090 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6723114 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6743420 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6743421 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460007376 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 737-003 | FLAP DRIVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 757-MAIN-FLAP-DOLLY | 757 MAIN FLAP TORQUE TUBE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 762-149 | AILERON AND FLAP TRAVEL TOOL - LEFT WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 762-150 | AILERON AND FLAP TRAVEL TOOL - RIGHT WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7C27030-33 | FLAP BALLSCREW (BACK LASH TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 852D102-4 | FLAP ACTUATOR BACKLASH TOOL | 6 | |
| 852D102/4 | TOOL, FLAP ACTUATORSB 27-069 | 6 | |
| 8819845000 | VISCO FLAP DISASSEMBLY TOOL | 1 | |
| 895-3101-19-101 | TOOL/M/R BLADE LAP PLATE BONDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97L57508828000 | DRILL TOOL-FLAP FAIRING DRIVE BRACKET LH | 2 | |
| 97L57508828001 | DRILL TOOL-FLAP FAIRING DRIVE TOOL RH | 2 | |
| 98A27503001001 | WING FLAP/SLAT CONTROL DRIVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27503002000 | TOOL: SAFETY FLAP SEAT 5100 | 8 | |
| 98A27503003000 | FLAP SLAT GUARD TOOL | 8 | |
| 98A27504012000 | EXTRACTOR HIGH LIFT FLAP TOOL | 6 | |
| 98A27504016000 | ADJUSTING TOOL-NUT SLEEVE-FLAP FORWARD ATTACHMENT | 7 | |
| 98A27504019000 | FLAP R/I BULLET TOOL | 6 | |
| 98A27504020000 | FLAP CARRIAGE RIG PIN TOOL | 3 | |
| 98A27504022000 | FLAP SETTING TOOL | 7 | |
| 98A27504024000 | EXTRACTOR SPIGOT FLAP TRACK TOOL | 7 | |
| 98A27504025000 | EXTRACTOR SPIGOT FLAP TRACK TOOL | 5 | |
| 98A27504029000 | FLAP REMOVAL/INSTALL BULLET TOOL | 3 | |
| 98A27504031000 | FLAP REM/INST GAP GAUGE TOOL | 5 | |
| 98A27504032000 | FLAP RIG PIN TOOL | 6 | |
| 98A27508005000 | INBD FLAP SLING TOOL | 2 | |
| 98A27508013000 | FLAPTOOL | 14 | |
| 98A27508015000 | TOOL: CHECK PIN SET FLAP 5100 | 7 | |
| 98A27508016000 | TOOL-FLAP LINKS EXTRACTION | 1 | |
| 98A27508017000 | TOOL-R/I FLAP | 1 | |
| 98A27508020001 | OUTER FLAP SLING TOOL | 4 | |
| 98A27508033000 | TOOL SET STA LOC, FLAP VANE SPRING ATTACHMENT, SL90-PN | 1 | |
| 98A27508042000 | STA-LOC TOOL SET,FLAP CARRIAGES 1-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27508050000 | TOOL: FLAP TURNING 5100 | 7 | |
| 98A27508058000 | CHECK TOOL-WING TIP BRAKE, FLAP.SUPS BY 98A27508063000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27508062000 | FLAP DRIVE TOOL | 2 | |
| 98A27803001000 | A300 KRUGGER FLAP GAUGE TOOL | 5 | |
| 98A27808003001 | DRIVE TOOL - 24 TEETH ( MANUAL RETARCTION OF FLAPS ) | 14 | |
| 98A27808611000 | TOOL CHECK-WING TIP BRAKE,SLAT FLAP | 1 | |
| 98A27808611001 | TOOL CHECK-WING TIP BRAKE,SLAT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27901022000 | FLAP & SLAT LEVER LOCKING TOOL | 7 | |
| 98A32301010000 | BACKLASH CHECKING TOOL - FLAP SCREWJACK 2 | 9 | |
| 98A32301011000 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1,3 AND 4 | 5 | |
| 98A52208001000 | REMOVAL/INSTALLATION TOOLS CARGO COMPARTMENT DOORS AUSBAU/EINBAUWERKZEUG-FRACHTKLAPPEN | 5 | |
| 98A57904000000 | OUTER FLAP SLING TOOL | 6 | |
| 98A57904001000 | CENTRE FLAP SLING TOOL | 5 | |
| 98A57904002000 | INNER FLAP SLING TOOL | 5 | |
| 98A79003000000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 8 | |
| 98AMS172332003 | FLAP TRACK NO.1 TOOL | 6 | |
| 98D-275-04041-000 | TOOL, FLAP ADJUSTING | 16 | |
| 98D275004082000 | TOOL FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27503000000 | LOAD MEASURING TOOL-FLAP SLAT CTL LEVER | 2 | |
| 98D27504002000 | Tool flap adjusting（inner flap track 1 adjusting） | 11 | |
| 98D27504003000 | Flap Adjusting Tool | 9 | |
| 98D27504003001 | Flap Adjusting Tool (Carriages) | 6 | |
| 98D27504005000 | FLAP RIG PIN TOOL | 24 | |
| 98D27504006000 | PIN RIGGING-FLAPS TRK,2 & 4. TOOLING | 23 | |
| 98D27504008000 | FLAP INTERCONNECT PIN TOOL | 26 | |
| 98D27504014000 | FLAP RIGGING BOARD TRACK 2 TOOL | 10 | |
| 98D27504015000 | FLAP RIGGING BOARD TRACK 3 TOOL | 7 | |
| 98D27504016000 | FLAP RIGGING BOARD TRACK 4 TOOL | 7 | |
| 98D27504028000 | 2 3 FLAP TRACK WRENCH TOOL | 14 | |
| 98D27504029000 | 4 FLAP TRACK WRENCH TOOL | 12 | |
| 98D27504030001 | SLAT/FLAP TORQUE SHAFT LOCK TOOL | 26 | |
| 98D27504031000 | FLAP INTERCONNECT RIG PIN TOOL | 25 | |
| 98D27504035000 | FLAP TRUNNION WRENCH TOOL | 20 | |
| 98D27504038001 | FLAP RIGGING KIT TOOLING | 18 | |
| 98D27504039000 | TOOL FLAP ADJUSTING | 9 | |
| 98D27504040000 | TOOL RESTRAINING # 1 FLAP CARRIAGE | 16 | |
| 98D27504041000 | FLAP ADJUSTMENT TOOL | 16 | |
| 98D27504081000 | TOOL-FLAP | 14 | |
| 98D27504081001 | TOOL FLAP ADJ TRK 2,3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27504082 | TOOL FLAP ADJUSTING (TRACK 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27504082000 | TOOL - FLAP ADJUSTING, | 21 | |
| 98D27504082000 | TOOL -FLAP ADJUST TRACK 4 | 21 | |
| 98D27504082001 | TOOL FLAP ADJ | 2 | |
| 98D27504083000 | FLAP TRACK EXTRACTOR TOOL | 15 | |
| 98D27504085000 | TOOLFLAP TOOL-FLAP ADJUSTING, TRACK 1 | 9 | |
| 98D27504113001 | A321 SHARKS FIN FLAP RIGGING TOOL | 14 | |
| 98D27504115000 | FLAP DISTANCE GAUGE TOOL | 12 | |
| 98D27504118000 | SPANNER FLAP ADJUSTING. TOOLING | 15 | |
| 98D27507541000 | FLAP WRENCH TOOL | 9 | |
| 98D27508564000 | TOOL - MILLING/CRIMPING, FLAP BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27604004000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 6 | |
| 98D2780 3000 000 | LOCKING TOOL - FLAP SLAT LEVER, INT. POSITION | 39 | |
| 98D2780 3500 001 | TOOL ZERO LOCKING - FLAP SLAT LEVER | 34 | |
| 98D27803000 | LOCKING TOOL FLAP SLAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27803000000 | LOCKING TOOL - FLAP | 39 | |
| 98D27803000000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 39 | |
| 98D27803000001 | LOCKING TOOL - FLAP SLAT LEVER , INT . POSITI | 5 | |
| 98D27803000002 | LOCKING TOOL FLAP/SLAT | 2 | |
| 98D27803000200 | LOCKING TOOL FLAP / SLAT CONTROL LEVER | 1 | |
| 98D27803500 | TOOL ZERO LOCKING FLAP/SLAT CTL LEVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D2780350000 | FLAP LOCKING TOOL ZERO POS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27803500000 | FLAP LOCKING TOOL ZERO POS | 3 | |
| 98D27803500001 | TOOL-ZERO LOCKING,FLAP/SL | 34 | |
| 98D27803500001 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | 34 | |
| 98D27803500002 | TOOL ZERO LOCKING ( FLAP SLAT CONTROL LEVER ) | 6 | |
| 98D27803500003 | TOOL-ZERO LOCKINGFLAP SLAT CTL LVR | 2 | |
| 98D2780350001 | TOOL ZERO LOCKING FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27803900000 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | 2 | |
| 98D27804001000 | FLAP/SLAT DRIVE ADAPTOR TOOL | 28 | |
| 98D27804011000 | FLAP/SLAT TURN BAR TOOL | 26 | |
| 98D28004083000 | FLAP VALVE GAG TOOL | 2 | |
| 98D32203502000 | LOCKING TOOL-FLAP SLAT | 39 | |
| 98D52307515000 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | 32 | |
| 98D57004014000 | TANK CAT FLAP HOLD OPEN TOOL | 25 | |
| 98D57004033000 | r/I tool flap | 12 | |
| 98D57004034000 | TOOL REM INST FLAP BEARING | 12 | |
| 98D57004050000 | REM/INS TOOL - FLAP BEARING | 6 | |
| 98D57004096000 | EXTRACTOR FLAP SPIGOT TOOL | 4 | |
| 98F27501002000 | REMINST REM.INST. TOOL -0 FLAP PCU | 1 | |
| 98F27501002001 | FLAP PCU-R I TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27501002002 | FLAP PCU- R/I TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27501002003 | FLAP PCU-R I TOOL | 2 | |
| 98F27501002004 | FLAP PCU-R/I TOOL | 2 | |
| 98F27501002005 | TOOL: FLAP PCU RMVL/ | 7 | |
| 98F27501002006 | FLAP PCU-R I TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27501012003 | REMINST REM. -0 INST. TOOL, FLAP PCU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27501012005 | REMINST.-INST.TOOL, FLAP PCU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27503000000 | FLAP PCU RI TOOL | 3 | |
| 98F27508013000 | FLAP DRIVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508202000 | PIN SET FLAP INTERCONNECTING STRUT** EQUIV TOOL | 14 | |
| 98F27508206000 | GAGE SET-END STOP FLAP ACT. TOOLING | 16 | |
| 98F27508208000 | FLAP CARRIAGE STOP TOOL | 13 | |
| 98F27508209800 | FLAP CARRIAGE STOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F275082098000 | FLAP CARRIAGE STOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508216002 | TOOL,GUIDE-R I FLAP ACTUATOR | 13 | |
| 98F27508237001 | SUPPORT STRUTS - FLAP TOOLING | 10 | |
| 98F27508237002 | SUPPORT STRUT - FLAP (TOOL) | 6 | |
| 98F27508238004 | STOP -CARRIAGE FLAP. TOOLING | 10 | |
| 98F27508335000 | TOOL - OPTICAL ALLIGMENT, INBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508336000 | TOOL - OPTICAL ALLIGMENT, INBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508337000 | TOOL - OPTICAL ALLIGMENT, OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508338000 | TOOL - OPTICAL ALLIGMENT, OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F27508390000 | TOOL - ADJUSTMENT, INBOARD FLAPS | 3 | |
| 98F27508498000 | HOIST R/I FLAP & SLAT TOOL | 23 | |
| 98F27508498000 | FLAP HOISTING SLING TOOL | 23 | |
| 98F27803000000 | TOOL: TOOL R/I, SLAP | 4 | |
| 98K7830H006-00 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L27003000000 | FLAP PCU REMOVAL TOOL | 4 | |
| 98L27508639000 | MAINTENANCE TOOL WTB SLAT+FLAP | 1 | |
| 98L27508639001 | TOOL MAINTENANCE WTB SLAT FLAP | 5 | |
| 98L27508651000 | TOOL-SHARK FIN,FLAP | 1 | |
| 98L27508651001 | FLAP SHARK FIN TOOL | 1 | |
| 98L27508660000 | TOOL - BRAKE TEST, FLAP LEVER | 3 | |
| 98L27508661000 | TOOL FLAP LVR. OVER. FORCE TEST | 4 | |
| 98L27508732000 | RIG-TOOL PARALLEL,FLAP | 2 | |
| 98L27801001000 | TOOL LOCKING FLAP SLAT CONTROL | 6 | |
| 98S27003001000 | SAFETY TOOL - WING FLAP CONTROL LEVER | 12 | |
| 98S27003010000 | SAFETY TOOL-WING FLAP CONTROL LEVER | 12 | |
| 98S27003010000 | FLAP CONTROL SAFTY TOOL | 12 | |
| 98S27005003000 | TOOL-TEST BOX FLAP | 6 | |
| 98S27005008000 | SAFETY TOOL WING FLAP | 6 | |
| 98S27005014000 | FLAP JACK LOCKING TOOL | 3 | |
| 98S27505001000 | Flap Actuator Drain Tool | 6 | |
| 98S57505002000 | POSITION FLAP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98V27508797000 | Flap drive rod adjustment tool | 2 | |
| 98V27508797001 | Flap drive rod adjustment tool | 7 | |
| 98V27508844000 | MAINT TOOL WTB SLAT AND FLAP- issue E | 8 | |
| 98V27508844001 | TOOL MAINT TOOL WTB SLAT AND FLAP | 3 | |
| 98V27801000000 | LOCK TOOL, CONTROL LEVER FLAP SLAT | 8 | |
| 98V27801900000 | TOOL CONT. LEVER FLAP SLAT | 2 | |
| 99000D27800000000 | Slats & flaps security tools | 1 | |
| A0940000W2 | TOOL,USE FOR TIGHTEN KRUEGER FLAP ACTUAT | 2 | |
| A27009-1 | TOOL - T/E FLAP PDU GND LOCK | 1 | |
| A27009-7 | B767 FLAP LOCKS TOOL | 19 | |
| A27016-22 | B767 I/B T/E FLAP SLING TOOL | 4 | |
| A27019-2 | B767 FLAP RESTRAINT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27027-34 | B767 O/B FLAP SLING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27051-1 | TOOL SET - TE FLAP DRIVE AND LE SLAT DRIVE GEARBOXES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27051-31 | TOOL - TE FLAP DRIVE AND LE SLAT DRIVE GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27074-146 | B767 I/B+O/B FLAP LOCK LINKAGE TOOL | 10 | |
| A27093-27 | 767 T/E FLAP ASYM TESTBOX TOOL | 5 | |
| A27105-9 | B767 AUXILIARY FLAP ADJUST TOOL | 6 | |
| A27128-1 | TOOL - REM/INST EQUIPMENT – OUTBOARD FLAP ACTUATOR, CRANK ARM MECHANISM | 5 | |
| A300-27-00-00-0214 | TOOL-FLAP TAB CONNECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A300-27-00-00-0249 | TOOL SET-FLAP TRACK R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A300-27-54-00-0258 | BLOCKING TOOL-FLAP CARRIAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A300-53-00-00-0108 | TOOL-LAP JOINT INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A300B4FLAPDRIVE-ADAP | A300 B4 FLAP DRIVE ADAPTOR TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A310-27-00-00-0298 | TOOL-REMOVAL, KRUEGER FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A320FLAPDRIVE-ADAP | A320 FLAP DRIVE ADAPTOR TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A663160 | SEMIFLUID REPLENISHMENT TOOL FLAP GEAR BOX | 9 | |
| A666633 | FLAP ACTUATOR LUBRICATION TOOL | 4 | |
| AB27001-A9Y | LOCKING TOOL-FLAP SLAT LEVER INT. POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27001-J3T | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27001-VV4 | TOOL-FLAP ADJUSTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27001-VV9 | FLAP ADJUSTING TOOL (CARRIAGES 2, 3 AND 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27001-VX1 | TOOL - FLAP ADJUSTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27001-VX2 | TOOL - FLAP ADJUSTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27003-NX1 | LOCKING TOOL-FLAP SLAT LEVER INT. POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB27004-NX2 | TOOL-ZERO LOCKING FLAP SLAT CTL LEVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE 11017 | FLAP ACTUATOR BACKLASH TOOL (SUNDSTRAND) | 6 | |
| AGE 13622 | LUBRICATING TOOL - FLAP ACTUATOR SERIES 734374 | 5 | |
| AGE 13623 | LUBE TOOL FLAP ACTUATOR | 5 | |
| AGE 13624 | LUBRICATION TOOL - FLAP ACTUATOR SERIES 755216 | 5 | |
| AGE-01853-401 | KIT-RIGGING TOOLS,FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-03025-401 | AUXILIARY TOOLS SET, RIGGING FLAP | 1 | |
| AGE-03025-403 | AUXILIARY TOOLS SET, RIGGING FLAP | 1 | |
| AGE-03248-401 | AUXILIARY TOOLS SET, RIGGING FLAP | 4 | |
| AGE-03249-403 | TOOL, FLAP RIGGING | 3 | |
| AGE-03249-404 | TOOL, FLAP RIGGING | 2 | |
| AGE-03544-401 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-03544-403 | SET - RIGGING TOOLS, FLAP | 3 | |
| AGE-04447-401 | SET - RIGGING TOOLS, FLAP | 3 | |
| AGE03544-401 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE03544-403 | SET - RIGGING TOOLS, FLAP | 3 | |
| AGE11017 | FLAP BACKLASH TOOL | 6 | |
| AGE12178 | LAPPING TOOL | 1 | |
| AGE12178-2 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE12927 | FLAP/SLAT TORQUE TOOLS,OUTER | 2 | |
| AGE12928 | FLAP/SLAT TORQUE TOOLS,INNER | 2 | |
| AGE13622 | FLAP ACTUATOR, LUBRICATING TOOL SERIES 734374 | 5 | |
| AGE13623 | LUBRICATING TOOL − FLAP ACTUATOR SERIES 734181 | 5 | |
| AGE13624 | TOOL, LUBRICATION, FLAP ACTUATOR | 5 | |
| AGE14039 | Lapping Tool | 1 | |
| AGE14582 | (TWO-SWITCH) COMMUNICATIONS CABLE (SLAT/FLAP CONTROLLER FIELD SOFTWARE TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AIT270007 | tool set-flap optical alignment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ASL-07384W0900-01 | TOOL SET-R/I, FLAP TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATHFlap SB1 | Flap SB Tool Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AW-98D27803500001 | ZERO LOCKING TOOL – FLAP/SLAT CONTROL LEVER -AIRBUS | 1 | |
| B27008-1 | LOCK TOOL FLAP POWER DRIVE | 23 | |
| B27020-31 | FLAP LOCK SET TOOL | 13 | |
| B27025-42 | IBD/OBD AFT FLAP SLING TOOL | 4 | |
| B27026 | T/E I/B +O/B FLAP SLING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27026-60 | TOOL - 757 SLING, OUTBD FLAP | 2 | |
| B27035-40 | TEST EQUIP TE FLAP XMSN TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27055-1 | T/E FLAP TORQUE TUBE CLAMP SET TOOL | 12 | |
| B57002 | EXTRACTION TOOL -0 CLAMP-UP BUSHING, AFT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57002-1 | EXTRACTOR TOOL FLAP SUPPORT | 4 | |
| BOF65B02025 | BEARING REPLACEMENT TOOL SET - FLAP FITTING, TRAILING EDGE | 2 | |
| C0035 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C0036 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C0037 | TOOL FLAP UNIV. JOINT ASSEMBLY | 1 | |
| C01612001-001GT00-02 | SLAT AND FLAP OBB UNLOCKING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12005-5 | FLAP LUB TOOL, BOEING JACKSCREW | 14 | |
| C27008-22 | Flap lockout tool | 16 | |
| C27030 | FLAP BACKLASH TOOL | 2 | |
| C27030-107 | FLAP BALLSCREW BACKLASH TOOL | 3 | |
| C27030-33 | FLAP SCREW BACKLASH TOOL - B737CL | 18 | |
| C27030-49 | LEVER TOOL - FLAP | 7 | |
| C27030-94 | FLAP SCREW BACKLASH TOOL | 17 | |
| C27030-95 | FLAP SCREW BACKLASH TOOL | 1 | |
| C27079-1 | FLAP TRAILING EDGE TOOL | 6 | |
| C27084-1 | TOOL, OUTBOARD FLAP TRANSMISSION | 13 | |
| CF-20G0255VM | MAINTENANCE LAPTOP (CONTROL TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CG9000055-0001 | Flap Hinge Bushing Tooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CG9275207-0001 | FLAP RIGGING TOOLS KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA141003 | FLAPS CHECKING TOOL - A300 | 2 | |
| CHA141478 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1 THRU 6 | 3 | |
| CHA700-224 | FLAP BACKLASH TOOL - A320 | 6 | |
| CJMDS27-004 | FLAP RIGGING TOOL KIT | 1 | |
| CJMDX27-005A | TOOL FLAP FIG BLOCK KIT | 3 | |
| CKJ 622719 | AILERON AND FLAP TRAVEL TOOL - LEFT WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CKJ 622720 | AILERON AND FLAP TRAVEL TOOL - RIGHT WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CKJ62 | AILERON AN FLAP TRAVEL TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D8D52307515000 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DO NOT OPERATE | FLAP OPERATION CARD TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7347-1 | RIGGING TOOL CONTROL BUS CABLE FLAP | 1 | |
| E17382 | LAPPING TOOL | 1 | |
| F100001-2 | FLAP TOOL | 1 | |
| F26804000 | Positioning Tool For Tube-Flapper | 3 | |
| F27 | FLAP TOOL L/H REM. INST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F47114 | LAPPING TOOL FOR THE FLEXURE TUBE | 1 | |
| F47114-100 | LAPPING TOOL FOR THE FLEXURE TUBE | 1 | |
| F47115 | LAPPING TOOL FOR THE BODY | 1 | |
| F50B957603 | TOOL KIT FLAP SLIDING ROLLER PEG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70085 | FLAP GIMBLE BEARING WRENCH TOOL | 22 | |
| F70293-1 | TOOL, FILLET FLAP REMOVAL | 1 | |
| F70297-1 | Roller swaging tool-bearing housing，drive screw，fillet flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70300-1 | FLAP DRIVE TURNING TOOL | 23 | |
| F72820-1 | PULLER BEARING FLAP TOOL | 1 | |
| F72923 | Lubrication tool set-carriage side rollers，T.E. flap | 1 | |
| F72968-2 | I/B FLAP RIGGING TOOL | 2 | |
| F72968-3 | OUTBD FLAP RIGGING TOOL | 2 | |
| F72975 | BEARING INSTL TOOL-TORQ LIMITER-FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72975-1 | BEARING INSTALLATION TOOL - TORQUE LIMITER, FLAP TRANSMISSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80-3-157-1 | CAP SEAL SIZING TOOL SLAT/FLAP PN 381800 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80040-15 | FLAP DRIVE SUPPORT TOOL | 16 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S (THE BOEING COMPANY) | 5 | |
| F80167-1 | Lubrication Tool Set - TE Flap Carriage Roller | 2 | |
| F80167-13 | FLAP CARRIAGE ROLLER LUBRICATION TOOL SET | 18 | |
| F80167-13 | LUBRICATION TOOL SET – TRAILING EDGE FLAP CARRIAGE ROLLER | 18 | |
| F80167-14 | Lubrication Tool Set - TE Flap Carriage Roller | 1 | |
| F80167-15 | LUBRICATION TOOL SET - TE FLAP CARRIEAGE ROLLER | 2 | |
| F80167-3 | LUBRICATION TOOL SET - TRAILING EDGE FLAP CARRIAGE | 8 | |
| F80186-10 | FLAP ALIGNMENT TOOL | 7 | |
| F80209-1 | INBOARD FLAP RIGGING TOOLS | 10 | |
| F80216-1 | Miscellaneous Tool- Support Assembly Trans. Flap Position, | 3 | |
| F80216-2 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY TRANSMITTER, FLAP POSITION | 1 | |
| F80216-3 | Tool Flap Positioning | 1 | |
| F80216-8 | Tool Flap Pos TX | 1 | |
| FB98D0085 | LOCKING TOOL-FLAP SLAT LEVER, INT. POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAP BEARING SKT | FWD FLAP BEARING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAP DRIVE ADAPTER | FLAP DRIVE ADAPTER TOOL | 1 | |
| FLAP-BEARING-KIT | FLAP BEARING KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAP-DEPRESSURE-TOOL | FLAP DEPRESSURE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAP-TORQUE-TUBE | EXTRACTOR I/OB FLAP TUBE PULLER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAP-TRACK-PIN-XTRAC | FLAP TRACK PIN EXTRACTOR TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAPDRIVE | FLAP DRIVE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLAPPEENINGKIT | FLAP PEENING KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLU179 | TOOL-FLAP UNIVERSAL JOINT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FPK-PRO-104 | FLAP PEENING TOOL KIT | 2 | |
| FPK-PRO-105 | ROTARY FLAPPER PEEN TOOL | 2 | |
| FY5-06924W87-01 | TOOL SET-KRUEGER FLAP ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FY5-06940 | TOOL SET-FWD FLAP TRACK BEARING R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FY5-07078W09-01 | TOOL-R/I FLAP DOWNDRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FY5-07384W09-01 | TOOL REMOVAL FLAP TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27013-9 | TOOL - RIGGING, INBOARD KRUGER FLAPS NO. 11 - 16 | 7 | |
| G27037-13 | FLAP LOCKOUT TOOLING | 7 | |
| G27096-1 | Rigging Tool - Skew Sensor TE Flaps | 2 | |
| G670271000−1 | Digital Protractor − Aileron and Flap Rigging Tool | 2 | |
| GPWS-FLAP-TEST-IND | FLAP INDICATION BLANK TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS12981 | REAR CONE LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS21290-1 | Flapper Setting Tool | 2 | |
| GSE146 | SET - RIGGING TOOLS, FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE190-LTC52045 | Vent flap seal installation tool | 1 | |
| GSE2700879 | FLAP TORQUE CHECK TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE2720832 | FLAP ACTUATOR SUPPORT TOOLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE702004-001 | FLAP RIGGING TOOLING | 2 | |
| GSEST NO.34 | RED TOOL BOX FLAPS | 1 | |
| HC130H0179-000 | 146 FLAP S/JACK BACKLASH TOOL | 3 | |
| HC131H0077-000 | Flap Rigging Tool | 4 | |
| HSP1394 | TOOL REAR CONE LAPPING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HSP586 | REAR CONE LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HT100 | TACHOMETER FOR FLAP PEEN KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IB-FLAP-BOLT-TOOL | INBOARD FLAP BOLT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27017-19 | FLAPERON RIGGING TOOL | 10 | |
| J27020-1 | FLAP RIGGING TOOL | 9 | |
| J27023-54 | TOOL,EQUIPMENT TRANSMISSION,TE FLAP | 4 | |
| J27035-55 | TOOL, LOCK EQUIPMENT FLAP | 5 | |
| J27035-59 | TOOL, LOCK EQUIPMENT FLAP | 6 | |
| J27096-1 | FLAPERON RIGGING TOOL, SECTION 13 | 6 | |
| JIGS | MLG T/E FLAP BEARING BRKTS TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27022-39 | TOOL-RIGGING EQUIPMENT - FLAPERON | 6 | |
| K27062 | RIGGING TOOL-DROOP PANEL TO INBD FLAP FILLET FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27062-1 | Rigging tool-droop panel to inbd flap fillet fairing | 7 | |
| K27064-1 | TOOL - RIGGING, FLAPERON | 1 | |
| K52033-83 | PAX DOOR VENT FLAP SEAL TOOL | 3 | |
| KS361 | SEMIFLUID REPLENISHMENT TOOL FLAP GEAR BOX | 1 | |
| LAPTOP | LAPTOP COMPUTER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LAPTOP-COMPUTOR | LAPTOP FOR BALANCE WEIGHTS TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LLA537A204 | BACKLASH CHECKING TOOL; FLAP SCREWJACKS 1, 3, 4 | 3 | |
| LLA547A108 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 2 | 2 | |
| LLA547A194 | TOOL BACKLASH CHECKING - FLAP S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT4005 | 53. VALVE LAPPING TOOL ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA970 | FLAP ROLLER INSTALLATION TOOL | 1 | |
| ME65B80443 | TOOL - TRAILING EDGE FLAP ROTARY ACTUATOR INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT113W2655 | MICELLANOUS TOOL HOLE TRANSFER SUPPORT FITTING MAIN FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65-45108-15 | FLAP GEARBOX RIGITT ANGLE TOOL | 1 | |
| MIT65-45108-156 | TE Wing Flap Drive Installation Alignment Checking Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65-56638-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B01925 | RESTRAINING TOOL - INBOARD AND OUTBOARD ACTUATOR FITTINGS, OUTBOARD TRAILING EDGE MIDFLAP | 1 | |
| MIT65B01970 | RESTRAINING TOOL - AFT FLAP ASSEMBLY, OUTBOARD TRAILING EDGE FLAPS | 2 | |
| MIT65B02023 | BEARING SWAGING TOOL - FOREFLAP LEVER | 1 | |
| MIT65B02070 | RESTRAINING TOOL - AFT FLAP, INBOARD TRAILING EDGE FLAPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B04008 | FLAP MANUAL DRIVE TOOL | 8 | |
| MIT65B81119 | MISCELLANEOUS TOOL - POWER PACK ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| MIT65B81120 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B81121 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSY, INBD T.E. FLAP DRIVE | 1 | |
| MIT65B81133 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| MITBAC5730-2 | PLAPPER PEENING EQUIPMENT KIT (CONTROL TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ML787 DELL | LAPTOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MTTG0120 | FLAP PEEN TOOL - MYTECHNIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OS23044 | Tool, Lapping | 2 | |
| PEENINGDTI | FLAP PEENING KIT DTI TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PS62000333-902 | WBS LAPTOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PTS-19557-1 | Lapping Tool | 1 | |
| PTS-19557-10 | Lapping Tool | 1 | |
| PTS-19557-11 | Lapping Tool | 1 | |
| PTS-19557-2 | Lapping Tool | 1 | |
| PTS19557-10 | SEAL LAPPING TOOL | 1 | |
| PTS19557-11 | SEAL LAPPING TOOL | 1 | |
| PWA27355 | LAP TOOL - N2 TACH GEAR SHAFT SEAL FACE_DIA.41.3X76.2MM/0.7KG_[PWA27355] | 1 | |
| PWA27441 | LAP TOOL - CSD GRSH SEAL FACE_[PWA27441] | 1 | |
| PWA27442 | LAP TOOL_66X70MM/0.7KG_[PWA27442] | 1 | |
| PWA27445 | LAP TOOL - MGB DEAE G/SFT SEAL FACE CLNG_[PWA27445] | 1 | |
| PWC48521 | LAPPING TOOL HMU GAAR | 1 | |
| PWC50937 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC54913 | lapping tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC57509 | Lapping Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC60108 | Lapping tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC60149 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC64569 | LAPPING TOOL | 2 | |
| R081600A01SB3-008-007-01 | ANGULAR TOOL FOR LAP BELT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R2DR-AUD-VID-T-LEADS | LAPTOP,AUD&VID(G-MONJ)TEST LEAD TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R46211 | LAPPING TOOL | 2 | |
| R46212 | LAPPING TOOL FOR THE FLEXURE TUBE | 2 | |
| RB T101750-101 | FLAPPING BEARING REMOVAL TOOL SET | 2 | |
| RB T101750-101P | FLAPPING BEARING REMOVAL TOOL SET | 1 | |
| RBT101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 2 | |
| RBW6705G00632-3G | Flapping Locking Tool, Tail Rotor | 1 | |
| RE268332124-1 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RE268332124-3 | BUSHING LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RE268338124-1 | LAPPING TOOL, BUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RE268338124-3 | LAPPING TOOL, BUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RJ-011 | FLAP BOAT REMOVAL TOOL (146/RJ) | 1 | |
| RRT101661 | LAPPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RWT45-0060-00 | ANTENNASLAPTOP MX TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SB75727A0125 | FLAP TORQ DTI KIT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SBA320-57-1083 | REM FLAPTRACK SPIGOT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SBA320-57-1158 | FLAP BEARING REM/INST TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SMART LAPTOP | LAPTOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST925A | STAKING TOOL - HINGE FLAP, FORWARD ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST9503-1 | STANDARD TOOL - UNIVERSAL FLAP PEEN TOOL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-774 | �TOOL - ANTICOLLAPSE, TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-7744 | TOOL - ANTICOLLAPSE, TUBING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-10879-75 | Lapping Tool | 1 | |
| T001038 | 90 DEGREE FLAP TRANSMISSION ALIGNMENT TOOL | 1 | |
| T001083 | Flap Alignment Tool | 1 | |
| T101468 | FLAP STOP TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101741-101 | CENTERING TOOL, TAIL ROTOR FLAPPING AXIS | 2 | |
| T101750-101 | FLAPPING BEARING REMOVAL TOOL SET | 1 | |
| T10879-75 | LAPPING TOOL | 1 | |
| T1087975 | LAPPING TOOL | 1 | |
| T92-22007 | LAPPING TOOL | 1 | |
| T9222007 | LAPPING TOOL | 1 | |
| TE65-73720-1 | Rigging Tool - Ouboard Flap | 1 | |
| TE65-73720-1 -2 | Test Equipment -Rigging Tool. Outboard Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73720-2 | TEST EQUIPMENT - RIGGING TOOL, OUTBOARD FLAP | 1 | |
| TE65-737201-1 | TOOL INBOARD FLAP RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-737201-2 | TEST EQUIPMENT -RIGGING TOOL. OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TES4052043 | TOOL-CONTROL DEVICE FLAPS (AFR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| THTOOLPOUCH | TOOL POUCH SS HOOKS NO FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOV2-4650231 | RIG TOOL, FLAP | 1 | |
| TS-5001 | FLAP STOP TOOL KRUGER | 1 | |
| U14A270000A | STAKING TOOLS FOR AILERON AND FLAP LINKAGE BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| U15A270000A | TOOLS KIT FOR AILERON AND FLAP LINKAGE BEARING CONVERSION (PART NO U15A270000A), (COMP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| f 80167-13 | lub tool set T E flap carriage roller | 18 | |
| f80167-13 | lub tool set T E flap carriage roller | 18 | |
| 98D27803500003 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | 2 | |
| 98A27504016000 | AJUSTING TOOL,NUT SLEEVE,FLAP FORWARD AT | 7 | |
| A0940000W2 | TOOL,USE FOR TIGHTEN KRUEGER FLAP ACTUAT | 2 | |
| CHA141478 | BACKLASH CHECKING TOOL,FLAP SCREWJACKS 1 | 3 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
