Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
20538 | HANDLE TIP | 1 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
018262_WER | Screwdriver, Flat Tip, Mini Tip, Soft Grip, Instinct Handle, Red, 7/32" tip, 5 3/4" | 1 | |
13189 | Bondhus® T-Handle Hex Key Sets ( Set: 8 PC Metric )( Size Range: 2 To 10 Mm )( Tip Style: Balldriver ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13190 | Bondhus® T-Handle Hex Key Sets ( Set: 10 PC Inch )( Size Range: 3/32" To 3/8" )( Tip Style: Balldriver ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13389 | Bondhus® T-Handle Hex Key Sets ( Set: 8 PC Metric )( Size Range: 2 To 10 Mm )( Tip Style: Hex ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13390 | Bondhus® T-Handle Hex Key Sets ( Set: 10 PC Inch )( Size Range: 3/32" To 3/8" )( Tip Style: Hex ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1289950 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
2-835-69-200 | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2-835-69-2000 | DEFECTOMETER SURFACE PROBE, STRAIGHT, .098" DIAMETER, 3" LONG WITH .5" LONG TIP AND 2.5" HANDLE, SH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2.835.01.3000 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23068623 | Puller – T-Handle, .250-28 Protective Tip | 4 | |
308P24 | 90TIP-DELRIN HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
309P24 | 90°TIP - DELRIN HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
309P34 | 90°TIP - DELRIN HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
313P24F | 15CRANK,90TIP DELRIN HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
91066-1 | INSERT/EXTRACTION TOOL/22 GAUGE PLASTIC HANDLE METAL TIPS GREEN WHITE | 10 | |
AF-4018 | LOW FREQUENCY SURFACE PROBE, 20-30KHZ, DIFFERENTIAL, .125" OD WITH .096" OD TIP, 90 DEGREE, .400" DROP, 15° BENT FROM HANDLE, 2.0" WORKING LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-4228/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, .300" Drop with a 70mm(2.75") Shaft Length and 3.0" Long Handle for a total Length of 5.75" Long Supplied with a 4 Pin Fischer Connector. Freque | 1 | |
AF-4230/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, 15mm( .475") Drop with a 79.5mm(3.12") Shaft Length Bent 20° 50.74mm(1.97") from the handle, 3.0" Long Handle for a total Length of 6.12" Long. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5089 | SUFACE PROBE SHIELDED, .075"Ø(1.9mm) TIP RIGHT ANGLE SHIELDED .118"(3mm) DROP, BENT 30° APPROXIMATELY 0.787"(20mm) AT HANDLE 5.0" LONG TRIAX FISCHER 50-500KHZ. Includes Test Report ancd Certificate of Conformance. | 1 | |
AF-5105 | SURFACE PROBE, .093"Ø SHAFT, WITH A .062"Ø TIP AND A .04O" DROP, BENT AT 1.5" FROM THE HANDLE 30° DEGREES, SUPPLIED WITH A TRIAX FISCHER CONNECTOR 6.0" LONG 50-500KHz. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5136 | SURFACE PROBE 90° 2" FROM THE HANDLE 1" AFTER THE 90°, .250 DROP .125" DIAMETER TIP, 100KHZ - 3 MHZ, 4.50" LONG TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5142 | Rigid Surface Probe Abs Unhielded, 200KHz Center Frequency, 50-500KHz operating range, .187"Ø Handle with .093"Ø Straight Shaft Metal 2.5" With Delrin Tip, 4.5" Total Length with Microdot Connector. Includes Test Report and Certificate of Conformance. ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5284 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 5.0 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 4.74mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certificate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5285 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 2.7 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of Total 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 3.30mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certif | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5296 | CUSTOM BLADE PROBE, STRAIGHT, WITH A .045" THICK TIP WITH A 45° JOGGLE AT THE HANDLE, 4.0" LONG, 100-500KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5313/500K | RIGID SURFACE PROBE, 90°, .175"Ø TIP, 3.4" LONG HANDLE, 4.5" TOTAL LENGTH .750" DROP 50-500KHz, LOCATOR SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-925-4.5 | 90TIP-DELRIN HANDLE | 1 | |
AP-95-4.5/L500K | 90°TIP - DELRIN HANDLE | 1 | |
B57004 | SUPPORT HANDLE-WING TIP BALANCE WEIGHTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FPAS-3 | DEFECTOMETER SURFACE PROBE, STRAIGHT, 3" WITH .5" LONG TIP AND 2.5" HANDLE, SHIELDED, AUSTENITIC, 2M | 1 | |
FPNS-3 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
FPNS-3L00 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Lemo connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GEIT 076-090-017-815P238 | FLEX ADJUSTABLE COPPER SHAFT DELRIN HANDLE 200 KHZ - 2 MHZ, 9" LENGTH O.7 TIP DROP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSHDI | SCREWDRIVER, HARD HANDLE INDUSTRIAL FINISH FLAT TIP 1/4" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71001-141 | MULTIPIER HANDLE ASSY | 1 | |
K71001-7 | Multiplier Handle Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M81969/101 | INSERT/EXTRACTION TOOL/22 GAUGE PLASTIC HANDLE METAL TIPS GREEN WHITE | 21 | |
MPENSS-1.5/2M | .095" tip 1.5" Straight Surface Probe, 1-3MHz, Shielded, Microdot, SS 1" x .25 Diameter Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PEN45-3P | 45° Surface Probe, Ø.125" Tip x .500" Drop x 3" Long, 50-500KHz, 3/8" Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PEN925-5-3/16 | 90TIP-DELRIN HANDLE | 1 | |
PENSS-1.5/2M | Straight Surface Probe, Ø.125" tip x 1.5" long, 1-3MHz, Microdot, 1" SS x .25 diameter handle | 1 | |
SCREWDRIVER SET, FLAT TIP/PHILLIPS®, INSTINCT® HANDLE, IND. FINISH SHANK, RED, (8 PCS.) | SCREWDRIVER SET, FLAT TIP/PHILLIPS®, INSTINCT® HANDLE, IND. FINISH SHANK, RED, (8 PCS.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SDAB12A | 3/16" HEX BALL TIP HANDLE DRIVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SDDP62 | SCREWDRIVER,PHILLIPS, BLACK HANDLE,#2 TIP,10 13/31IN | 1 | |
SDDX40 | MINI TIP PHILLIPS SCREW DRIVER SET PLASTIC HANDLE 4PC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SG3ASH45BR | PICK, MINIATURE, PLASTIC HANDLE, 45DEG TIP, BLACK 5 7/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SG3ASH45CR | PICK, MINIATURE, PLASTIC HANDLE, 45DEG TIP, BLACK 5 7/8" | 1 | |
SG3ASH90BR | MINIATURE PICK PLASTIC HANDLE 90" TIP, BLACK, 5 7/8" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SG3ASH90CR | PICK, MINIATURE, PLASTIC HANDLE, 90DEG TIP, BLACK, 5 7/8" | 1 | |
SGD146BR | SCREWDRIVER,FLAT TIP,CABINET BLACKHANDLE,.030IN*3/16INTIP,9 7/16IN | 2 | |
SGDX80BR | SCREWDRIVER SET (8PCS) SOFT GRIP RED HANDLE 5PCS FLAT TIP & 3PCS | 3 | |
SHD1 | SCREWDRIVER, HARD HANDLE FLAT TIP 1/4" | 2 | |
SHD1O | SCREWDRIVER, FLAT TIP, INSTINCT™ HARD HANDLE, ORANGE, .040" | 1 | |
SHD1R | SCREWDRIVER, FLAT TIP, INSTINCT? HARD HANDLE, RED, .040" | 3 | |
SHD2O | SCREWDRIVER, FLAT TIP, INSTINCT™ HARD HANDLE, ORANGE, .035" | 1 | |
SHD2R | SCREWDRIVER FLAT TIP INSTINCT HARD HANDLE RED 6-15/16" LENGHT | 2 | |
SHD3040 | SCREWDRIVER, HARD HANDLE FLAT TIP 1/8" | 1 | |
SHD4O | SCREWDRIVER, FLAT TIP, INSTINCT™ HARD HANDLE, ORANGE, .040" | 2 | |
SHD4R | SCREWDRIVER FLAT TIP INSTINCT HARD HANDLE RED 8" LENGHT | 2 | |
SHD6O | SCREWDRIVER, FLAT TIP, INSTINCT™ HARD HANDLE, ORANGE, .050" | 1 | |
SHD6R | SCREWDRIVER, FLAT TIP, INSTINCT HARD HANDLE, RED | 1 | |
SHD8O | SCREWDRIVER, FLAT TIP, INSTINCT™ HARD HANDLE, ORANGE, .055" | 1 | |
SHD8R | SCREWDRIVER FLAT TIP INSTINCT HARD HANDLE RED 13" LENGHT | 2 | |
SHDX40R | MINI TIP PHILLIPS SCREW DRIVER SET PLASTIC HANDLE4PC | 1 | |
SSDMR4BO | SCREWDRIVER BIT SET AND HANDLE;8.750";STRAIGHT;6;FLAT TIP BITS SIZE 3/16 AND 9/32 IN.;PHILLIPS BITS SIZE 1 AND 2 (ACR);TORX BIT SIZE T-15;|RATCHETING AND MAGNETIC BIT RETENTION;ORANGE HANDLE; | 2 | |
TEK-1521B | Special Low Frequency Probe, Bent handle, Ø.156" tip x .300" drop, Reflection, 1-50KHz, Triax | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TORQ-MULTI-HANDLE | HANDLE FOR TORQ-MULTIPLIER TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TX5PEN92-4B | 90° Microtip Probe, .050"Ø x .2" Drop x 4" Long, 50-500KHz, Bent Handle Triax Connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TXPEN91-7B-ELS | 90° Surface Probe, Ø.062" tip x .100" drop x 7" long, 50-500KHZ, w/ Bent Handle and Triax Connector, 3" WL (.062" tip) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.