Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
2MIT100T3480-210 | HANDLE ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
ACL00-MDH-6 | CABLE LEMO 00 TO MICRODOT( WITH HANDLE ON MD END) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5022 | HIGH FREQUENCY SURFACE PROBE 1-3MHz, ABS COIL, .500 DROP,.098 TUBING, 6.0" LONG, BENT AT 30 DEG 1.0" FROM THE HANDLE, SUPPLIED WITH A MICRODOT. Includes Test Report and Certificate of Conformance. | 1 | |
AF-5096/2M | SURFACE PROBE ABSSOLUTE SHEILDED, 1-3MHZ, 90° DEGREES, .200" DROP, .098"Ø TUBING, 4.0" LONG 30° DEGREES BENT AT 1.0" FROM THE HANDLE WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5142 | Rigid Surface Probe Abs Unhielded, 200KHz Center Frequency, 50-500KHz operating range, .187"Ø Handle with .093"Ø Straight Shaft Metal 2.5" With Delrin Tip, 4.5" Total Length with Microdot Connector. Includes Test Report and Certificate of Conformance. ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5176 | LOW FREQUENCY SURFACE PROBE 1-5KHz, REFLECTION, .500 DROP,..312"Ø(8mm) TUBING, 8.27" (210mm)LONG, MICRODOT BENT 65mm FROM THE HANDLE Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5252 | Custom Flexible Surface Probe, 90°, .125"Ø, Frequency 1-3MHz, .250" Drop, 1.0" long handle machined to .425"Ø. Probe total length of 11.0" supplied with a microdot connector. Includess Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5284 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 5.0 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 4.74mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certificate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5285 | Rigid Surface Probe, Absolute 500KHz Center Frequency, 2.7 (MIN) Tip Length, 86mm Long Handle with a Total Probe Length of Total 114mm, 4.5”, (15deg Crank, 90° deg tip Shank) 3.30mm Ø Tip Supplied with a Microdot Connector. Includes Test Report and Certif | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5313/500K | RIGID SURFACE PROBE, 90°, .175"Ø TIP, 3.4" LONG HANDLE, 4.5" TOTAL LENGTH .750" DROP 50-500KHz, LOCATOR SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AF-5318 | RIGID SURFACE PROBE, 45° DEGREES, .500" DROP, ABS SHEILDED. FREQUENCY RANGE: 1-2MHz. 4.0" LONG( 2 INCH HANDLE LENGHT WITH A 2 INCH SHAFT LENGTH) SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1202L | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, 737 Part 4 57-50-01.Includes Test Report and Certificate of Conformance. | 1 | |
AFS-1202R | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, 737 Part 4 57-50-01. Includes Test Report and Certificate of Conformance. | 1 | |
AFS-1387 | NDT SYSTEMS MD-11, 5 MHz .187" x .187" ELEMENT 36° SHEAR WAVE SEARCH UNIT , 5.0" LONG HANDLE WITH MICRODOT CONNECTOR. MD-11 SECTION 2.5 PAGE 1 FIGURE 5.2 Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFS-1390HC | 90° IN ALUMINUM 5 MHz .187" X .187" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .690"L x .250"W x .590"H WITH TOP MOUNT MICRODOT CONNECTOR AND 10-32 HELICOIL ATTACHED FOR EXTENSION HANDLE USE. Includes Test Report and Certificate of Conformance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BK7000HDLE-8 | BK7 HANDLE PRODUCT LABEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BL050-5-1 | .050" Thick, 5" long, Straight Blade Probe 100-200Khz, Microdot, 2" Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FPNS-3 | Defectometer Surface Probe, Straight, 3" with .5" long tip and 2.5" handle, Shielded, Non-ferrous, 2Mhz, Microdot connector | 1 | |
FPNS95-9 | Defectometer Surface Probe, 90° x .5" drop, 9" with 3" handle and 6" shaft, Shielded, Non-ferrous, Microdot Connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KCT1352A | GREEN ROD WITH HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KCT1352B | GREEN ROD WITH OUT HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KCT1353A | GREEN ROD WITH HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KCT1353B | GREEN ROD WITH OUT HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KCT146-QA | 27-1/2IN ROD WITH HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LST53050 | 1-1/2-8"RANGEW5RODS/HANDLEW/CA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LST53052 | 1-1/2-12"RANGEW/8RODS/HANDLEW/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MPENSS-1.5/2M | .095" tip 1.5" Straight Surface Probe, 1-3MHz, Shielded, Microdot, SS 1" x .25 Diameter Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT726 | CUSTOM 45 DEGREE 5MHz .187"x.187" SHEAR WAVE TRANSDUCER WITH HANDLE BENT AT 5 DEGREES AWAY. MICRODOT CONNECTOR. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT727G | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, Part 4 57-50-01 | 2 | |
NDT728 | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, Part 4 57-50-01 | 1 | |
PEN92-6B/750K-3/16 | 90° Surface Probe, .187"Ø Shaft x .2" Drop x 6" Long, 20KHz-1MHz, Tuned at 750Khz, Microdot Connector, 15° Bend 1.18" from handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PEN925-6B | 90° Surface Probe, .125"Ø x .25" Drop x 6" Long, 50-500KHz, Microdot, 30° Bend near the handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PENFLX-1.75-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 1.75" long, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PENFLX-2.5-1 | Special Surface Probe, copper flexshaft, .312 diameter handle, 2.5" long, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PENFLX915-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .15" Drop, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PENFLX93-2-1 | Special 90° Surface Probe, copper flexshaft, .312 diameter handle, 2" long, .3" Drop, 50-500KHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PENSS-1.5/2M | Straight Surface Probe, Ø.125" tip x 1.5" long, 1-3MHz, Microdot, 1" SS x .25 diameter handle | 1 | |
PN2XS6-02 | HANDLED PRODUCT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PT.31.1 | CUSTOM 45 DEGREE 5MHz .187"x.187" SHEAR WAVE TRANSDUCER WITH HANDLE BENT AT 5 DEGREES AWAY. MICRODOT CONNECTOR. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPEN92-3P | 90° Surface Probe, .072"Ø x .200" Drop x 3"Long, 50-500KHz, 3/8" Handle, 120uH coil, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPEN92-8P | 90° Surface Probe, .072"Ø x .200" Drop x 8"Long, 50-500KHz, 3/8" Handle, 120uH coil, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPENFLX92-3/500K | 90° Copper Surface Probe, .072"Ø x .200" Drop x 3"Long, .3/8" Dia. Handle, 200K-1MHz, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPENFLX92-4P | 90° Copper Surface Probe, .072"Ø x .200" Drop x 3"Long, 50-500KHz, 3/8" Handle, 120uH coil, Microdot | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4260R | ROD T-HANDLE SLIDE PROTO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK766/767-H | RIGID MICRODOT EXTENSION HANDLE | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.