| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98V24003001000 | EQUIPMEN | 5 | |
| K32015-1 | EQUIPMEN | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J27017-19 | RIGGING EQUIPMENT - FLAPERON | 10 | |
| G38005-111 | TEST CHAMBER EQUIPMENT | 10 | |
| "^2^PM83-3124" | EQUIPMENT - SAMPLING, FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 0MNI2P2PA16128 | Test equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 201137-CA | PROPELLER LIFTER -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 23954 | TORQUE EQUIPMENT - VERTICAL FIN, ELECTRICAL-POWERED 230V VERSION. (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 30446-0033 | X/FGCOMP. INSPECTION EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) 31-37-100 | ZEROING ZEROING-EQUIPMENT SYNCHRO RESOL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 31-590-100 | ZEROING EQUIPMENT-SYNCHRO-RESOLVERS (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 341206-29 | BOOSTRAP -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICAL RE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 6000133343 | MEASURING EQUIPMENT - BRAKE PEDAL(SINGLE PEDAL) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 856A2645G02 | Engine exchange equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 915-18205 | AIRCRAFT VIBRATION ANALYSIS AND CONTROL EQUIPMENT, CHADWICK VXP (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27203250002 | MEASURNG MEASURING EQUIPMENT - RUDDER PE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27301002000 | ANGLE MEASURING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27303502000 | EQUIPMT MEASURING EQUIPMENT T.H.S DEFLE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27308031000 | TEST TEST EQUIPMENT-DETENT UNITS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27801000000 | EQUIPMT EQUIPMENT -REMOVAL INSTALLATIO (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A27903501001 | MEASURNG MEASURING EQUIPMENT - PITCH AND (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A32101502000 | HOIST HOISTING EQUIPMENT-MLG ACTUATIN (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A32101506000 | R/I EQUIPMENT - MLG DOORS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A32103500005 | EQUIPMNT EQUIPMENT-R I MLG DOORS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A32104158000 | EQUIPMENT HOISTING MAIN GEAR (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A32203500000 | EQUIPMEN EQUIPMENT-HOISTING MAIN GEAR AC (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98A53603006000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D27203000001 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D28004002000 | TEST TEST EQUIPMENT-APU FUEL FEED (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D28108417000 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D29208581000 | EQUIPMNT PROTECTION EQUIPMENT - RAT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104002000 | EQUIPMENT-MLG REMOVAL INSTALLATION (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104002001 | EQUIPMT EQUIPMENT-MLG REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104002002 | EQUIPMT EQUIPMENT MLG, REMOVAL INSTALLA (CALIBRATION) | 13 | |
| (CALIB) 98D32104002003 | EQUIPMNT EQUIPMENT-MLG, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104009001 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104009002 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104009003 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D32104009007 | EQUIPMT EQUIPMENT-R I OF THE MLG ACTUAT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D71203501002 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 98F21001004001 | EQUIPMT EQUIPMENT,R I-PACK EXCHANGER (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F30403001000 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104005001 | HOIST-EQUIPMENT, SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104005002 | HOIST HOIST-EQUIPMENT,SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104005004 | HOIST HOIST-EQUIPMENT,SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104008000 | HOIST HOIST EQUIPMENT ACTUATOR, MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104008001 | HOIST HOIST EQUIPMENT - ACTUATOR, MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104009000 | HOISTEQP HOIST EQUIPMENT, PINTLE PIN (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F32104009001 | HOISTEQP HOIST EQUIPMENT - PINTLE PIN (W (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F52003003001 | PROTECTIVE EQUIPMENT, SET (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98F52308859000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L28203001000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L52809001000 | REMOVAL EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L54503021000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S71000003001 | ENGINE SLING -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98V24003001000 | R/I HEAVY LOAD EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98V24209002000 | PROTECTION EQUIPMENT - RAT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 99A32401001000 | EQUIPMEN EQUIPMENT-MEASURING,BRAKE PEDAL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 99D54403000006 | Calibration equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A1-43-1096 | HOIST MLG - HOIST EQUIPMENT 10 CWT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A1-44-349 | HOIST MLG - HOIST EQUIPMENT 25 CWT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A11116 | LIFTING EQUIPMENT -LIFTING, NLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A1M-EMB-GE-1 | DATA ACQUISITION GAG-ING EQUIPMENT (REPAIR & CALIBRATION) | 1 | |
| (CALIB) A20002-4 | Personnel protective equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A27012-30 | Sling, Equipment INBD/ OUTBD (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A27015-1 | Sling, Equipment INBD/ OUTBD (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A27021-29 | Adapter Equipment cont. Wheel (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A27124-1 | RUDDER EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) A27124-36 | FORCE EQUIPMENT - RUDDER FREEPLAY CHECK (CALIBRATION) | 1 | |
| (CALIB) A28014-1 | PHASE CHECKING EQUIPMENT - GROUND FAULT INTERRUPTER RELAY (CALIBRATION) | 1 | |
| (CALIB) A32032-64 | R/I Equipment - MLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A32047-29 | COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR (NLG) (CALIBRATION) | 1 | |
| (CALIB) A52016-1 | RIGGING ADJUSTMENT EQUIPMENT - FORWARD AND AFT CARGO DOORS (CALIBRATION) | 1 | |
| (CALIB) A54001-167 | Sling Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A55001-22 | LOCK EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) A57001-1 | JIG EQUIPMENT - REAMING, TRUNNION SUPPORT, CAGE CODE 81205 - BOEING (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) B27034-1 | Measuring equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) B71001-372 | ENGINE HANDLING EQUIPMENT - RB211-535 (CALIBRATION) | 2 | |
| (CALIB) B71042-142 | Handling Frame Equipment - C/Duct, RB211-535 Engine (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) B78009-26 | LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE (CALIBRATION) | 2 | |
| (CALIB) C26007-72 | TEST EQUIPMENT - COMPARTMENT OVERHEAT DETECTION (M237, IN-LINE) (CALIBRATION) | 3 | |
| (CALIB) C27035-20 | SLING EQUIPMENT RUDDER R/I (CALIBRATION) | 1 | |
| (CALIB) C36001-64 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C36006-1 | Test Equipment - Air Supply Control System (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C44001-55 | Removal/Installation Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C49004-38 | SLING EQUIPMENT (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C49007-1 | APU HOIST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C54010-1 | Tool equipment sling (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C54010-26 | Sling Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C55007-1 | SLING EQUIPMENT - HORIZONTAL STABILIZER REMOVAL/INSTALLATION (CALIBRATION) | 2 | |
| (CALIB) C71003-247 | BOOTSTRAP KIT CFM56-3 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) C71029-1 | BOOTSTRAP EQUIPMENT - LEAP-1B ENGINE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C71040-1 | TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, CFM LEA (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) C78012-14 | HOLD OPEN EQUIPMENT THRUST REVERSER (CALIBRATION) | 1 | |
| (CALIB) C78019-15 | T/R HOLD OPEN EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78021-1 | 65 DEGREE HOLD OPEN EQUIPMENT-T/R COWL CFM56-7 (CALIBRATION) | 1 | |
| (CALIB) C78032-1 | sling equipment trust reverser (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) CG9000088-0001 | AFT EQUIPMENT BAY INTERIOR PLATFORM (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) F80114-82 | CRADLE-APU HOISTING EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) F80229-52 | TEST EQUIPMENT - FIRE EXTINGUISHING (CALIBRATION) | 1 | |
| (CALIB) G28018-33 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G29014-1 | Extension Equipment - Ground Serv. Disconnect, L/R Hydraulic Syst. (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G34002-1 | CAL EQUIPMENT | 1 | |
| (CALIB) G36035-1 | Test Equipment - Pneumatic System Health check (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G38006-1 | EQUIPMENT - REMOVAL,WASTE BLOCKAGE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G49002-96 | Cradle Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G54016-1 | Sling Equipment-Strut removal/installation (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G71042-41 | HOIST EQUIPMENT - ENGINE MOUNT, FWD AND AFT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G71043-1 | Sling equipment,Fan cowl (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GEKKO | ULTRASONIC EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE55918 | HOIST HOIST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE55944 | EQUIPMNT EQUIPMENT -LIFTING, WLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE55946 | HOIST HOIST - EQUIPMENT, BLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE55948 | HOIST HOIST - EQUIPMENT, WLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE56042 | HOIST HOIST-EQUIPMENT,WLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE56043 | HOIST HOIST - EQUIPMENT, WLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) GSE56076 | HOIST HOIST - EQUIPMENT, BLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) HG20 | Hoisting Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) HRK01 | RAT TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55083-5 | HOISTING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J23002-16 | ADAPTER EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) J26008-35 | TEST EQUIPMENT, ENG.FIRE SYS. (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J27079-31 | INSPECTION EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J27079-38 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 1 | |
| (CALIB) J28010-140 | CONSOLE EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) J32073-21 | Hoist equipment R/I (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J55006-114 | TORQUE EQUIPMENT – VERTICAL FIN BOLTS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J78015-77 | Sling equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) J78015-96 | Sling Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K20002-25 | EQUIPMENT - SHOCK ABSORBING LANYARD (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K21004-72 | Adapter equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K21013-36 | R/I EQUIPMENT FCAC PUMP (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K27001-126 | REMOVAL / INSALLATION EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K27004-156 | Hoist Equipment R/I (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K27008-67 | Sling Equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K27009-124 | R/I Equipment Flaperon (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K27030-1 | COUNTER EQUIPMENT - REVOLUTION (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K32015-1 | NLG LOWER SEAL EQUIPMENT, R/I (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K32020-1 | Retainer equipment - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K47003-1 | Equipment NGS Motor Driven Compressor R/I (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K49002-1 | HOIST EQUIPMENT | 1 | |
| (CALIB) K52002-90 | BARRIER, LOCKING ARM EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K54003-1 | Sling Equipment - Strut Unload, Engine On Wing (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K55002-46 | EQUIPMENT - LOAD APPLICATION (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K71006-20 | HOIST EQUIPMENT ENGINE MOUNTS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K71008-37 | SLING EQUIPMENT FAN COWL BEAM (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K78002-70 | EQUIPMENT - T/R SLEEVE SLING GENX-1B (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K78004-104 | Sling equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) K78011-1 | Hold open equipment - trent 1000 thrust reverser (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) LABINO APOLLO 1.0 | RADIOMETER/PHOTOMETER EQUIPMENT (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) M6458-1 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) MRC0006507 | EQUIPMENT MOISTURE INDICATOR (COM-2010) (CALIBRATION) | 1 | |
| (CALIB) PWTE1 | POTABLE WATER TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) RSIK1 | Protective equipment (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) T792992055000000H | Sling equipment MLG and NLG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) T792999440000000H | Equipment R/I Stabilisator (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) TMHGA42-00-00 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) U21895200 | HOISTING EQUIPMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) UNIV-20-40-BA | Manual and Automatic Static Testing Equipment for Aircraft Applications (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB)C27050-82 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, STABILIZER JACKSCREW (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 001U123A0400000 | LG Shock Strut Service Equipment | 1 | |
| 00980648 | EQUIPMENT HOISTING MAIN GEAR ACTUATING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 02-7813-0100 | JACK - NLG AXLE TIRE CHANGING (12 TONS (10 886 KG)) (OPTIONAL EQUIPMENT) | 9 | |
| 03523000000 | AIRPORT EQUIPMENT GROUND POWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 050-2719-103 | GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 06-4005-0511-A2 | FILLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 06-4035-0500 | SERVICING EQUIPMENT HYDRAULIC | 12 | |
| 06-5004-0500 | HYDRAULIC PRESSURE BLEEDING EQUIPMENT (TRONAIR) | 8 | |
| 06-5042-0500-A3 | HYDRAULIC SERVICING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 07-3006-6900 | KIT FUEL SAMPLE - GROUND SPACE EQUIPMENT | 12 | |
| 08-4048-1013 | COMPRESSOR WASH EQUIPMENT | 3 | |
| 08-4049-0013 | COMP WASH EQUIPMENT | 12 | |
| 08-4049-1011 | COMP WASH EQUIPMENT | 2 | |
| 0840490013 | COMP WASH EQUIPMENT | 12 | |
| 093-0019 | ESD TEST EQUIPMENT SET TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0HME65B98605-1 | SLING EQUIPMENT APU GENERATOR | 5 | |
| 0MNIPPA1664 | ULTRASONIC EQUIPMENT OMNISCAN MX PAUT16-128 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 0U7J1 | METERING EQUIPMENT, BIOCIDE, HAMMONDS FUEL ADDITIV | 1 | |
| 1-00-6-09 | ELECTRICAL BORESIGHT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1-30100-0221 | LUMINOMETER FUEL TEST EQUIPMENT | 2 | |
| 10-100-4041 | PROPELLER BALANCING EQUIPMENT (ALT. ACES) (ACES PN 10-100-4041) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10-4036-0010 | TOILET SERVICING EQUIPMENT | 12 | |
| 100-0128-04 | EQUIPMENT - SAMPLING FUEL | 5 | |
| 100-0128-04-AZL | FUEL SAMPLING AND SUMPING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1000 | EDDY CURRENT EQUIPMENT NORTEC | 1 | |
| 1015 | PHOTOSENSOR (MICROVIB II BALANCING EQUIPMENT) | 1 | |
| 100275 | 10000 LBS (5000 KG) CAPACITY JACK WEIGH EZ RFX JACK LOAD CELL (10K) CELL FOR WEIGHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 100290 | FLOOR PLATFORM EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1001727 | BLUELINE AIR HOSE 7.5 METERS-PROTECTIVE BREATHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 100880-RFX | AIRCRAFT CELL WEIGHING EQUIPMENT JACK WEIGH EZ RFX 3-15 5000 LBS (2500 KG) 3-CELL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00901 | MGT TEST EQUIPMENT | 16 | |
| 1013932 | PROTECTIVE BREATHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1014668 | INFLATION EQUIPMENT WITH ADAPTER EXCLUSIVE MANOMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1033-1 | CONTROLLER, EQUIPMENT COOLING | 3 | |
| 103ARB | EQUIPMENT COOLING TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 107K945G01 | ALLM TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10801039 | CLEANING EQUIPMENT VACLAV - TANK, INTERN | 1 | |
| 109-3130-01-13 | TAIL ROTOR BALANCING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3130-01-147 | T/R BALANCING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3600-04-301 | EQUIPMENT, PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10ME65B00161-951 | MECHANICAL EQUIPMENT - SUPPORT, MAIN LANDING GEAR, WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10PRE65B00161-1 | PROTECTIVE EQUIPMENT - BOLT ACTUATOR ATTACHMENT, WING LANDING GEAR | 7 | |
| 10PRE65B00713 | PROTECTIVE EQUIPMENT - PROPULSION POD COVER THRUST REVERSER PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10TE65-46517 | Test Equipment -Vent Installation. Wing Fuel Tank | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11-07102 | PROGRAMMING EQUIPMENT KANNAD | 1 | |
| 111-848 | ADAPTER FOR PLAY MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1120-01-050 | EQUIPMENT -COMMUNICATION | 1 | |
| 1120-01-055 | EQUIPMENT - COMMUNICATION, CONFINED SPACE | 1 | |
| 1141-1100 | 15 TON AXLE WEIGHING JACK NEW EQUIPMENT | 1 | |
| 1159SCB3102-1HOE | HOISTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 119003-11 | PBE(PROTECTIVE BREATHING EQUIPMENT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3276G02 | SPL-13491 - HOIST EQUIPMENT - GENX AFT ENGINE MOUNT PLATFORM | 1 | |
| 11C3444G01 | THREAD PROTECTOR EQUIPMENT | 1 | |
| 11C3444G1 | SPL-9081 - HREAD PROTECTOR EQUIPMENT - THRUST LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C4552P05 | PRESERVATION EQUIPMENT FOR GENX ENGINES | 1 | |
| 11MIT65B04012 | LOCK - ACTUATOR, NOSE LANDING GEAR DOOR (FLYAWAY EQUIPMENT) | 11 | |
| 11PRE65B00040 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | 10 | |
| 210 | BOND TESTING EQUIPMENT | 2 | |
| 607 | STRUT SERVISING EQUIPMENT (HIGH PRESSURE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1460 | SENSOR (MICROVIB II BALANCING EQUIPMENT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1612 | SENSOR (MICROVIB II BALANCING EQUIPMENT) | 1 | |
| 1851.07 | laser target equipment | 1 | |
| 1858 | ELECTRONIC EQUIPMEN | 1 | |
| 1922 | EQUIPMENT - REMOVAL / INSTALLATION, WHEEL RETENTION NUT, MLG AND NLG | 24 | |
| 2000 | EDDY CURRENT EQUIPMENT NORTEC | 5 | |
| 2007 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2303 | EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5431 | HYDRAULIC POWER UNIT, 54 SERIES (CE) (BASE MODEL) 5431 | TRONAIR - AIRCRAFT GROUND SUPPORT EQUIPMENT | 7 | |
| 6030 | CASE - EQUIPMENT (5/8 THRU 1-1/2 IN. SWAGER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6040 | CASE - EQUIPMENT (1/4 THRU 1/2 IN. SWAGER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7011 | FILLING EQUIPMENT | 8 | |
| 7034 | FILLING EQUIPMENT TANK OIL | 1 | |
| 7310 | VIBRATION SENSOR (VIBREX 2000 BALANCING EQUIPMENT) | 6 | |
| 8500 | PROPELLER BALANCING EQUIPMENT (ALT. ACES) (8500 SYSTEM (CHADWICK & HELMUTH) | 5 | |
| 8714 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 3 | |
| 8913 | TEST EQUIPMENT | 7 | |
| 11960 | TORQUE EQUIPMENT - VERTICAL FIN, ELECTRICAL-POWERED TORQUE ONLY SYSTEM | 2 | |
| 20695 | PICKOFF PLAY MEASURING EQUIPMENT | 1 | |
| 23226 | TORQUE EQUIPMENT - VERTICAL FIN, ELECTRICAL-POWERE | 2 | |
| 23314 | TORQUE EQUIPMENT - VERTICAL FIN, MANUAL TORQUE ONLY SYSTEM | 3 | |
| 23954 | TORQUE EQUIPMENT - VERTICAL FIN, ELECTRICAL-POWERED TORQUE ON | 3 | |
| 43228 | EQUIPMENT - TORQUE, TRUNNION BOLT,BLG AND NLG(G32066-1) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 59030 | HYDRAULIC TESTER BLEEDING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 67366 | TOOL - POWER SOURCE EQUIPMENT T | 2 | |
| 111842 | RESOLVER PLAY MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 111848 | ADAPTER FOR PLAY MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 111863 | ROTATING UNIT PLAY MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 140259 | KIT WEIGHT AND BALANCE EQUIPMENT (0 -60000 LBS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 200269 | EQUIPMENT SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 245277 | KIT, EQUIPMENT, TEST,ES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 420324 | CABLE TENSION REGULATOR LOCK EQUIPMENT | 3 | |
| 725782 | VIBRATION SENSOR (VIBREX 2000 BALANCING EQUIPMENT) | 1 | |
| 731436 | (RAT) Ground Check Test Equipment | 1 | |
| 757505 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 757705 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 758983 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 905376 | TEST EQUIPMENT COUPLING UNIT ENGINE1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 905823 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 906064 | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 906065 | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 906066 | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 930002 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 8 | |
| 940996 | MULTIFUNCTION AEROSPACE GROUND EQUIPMENT (SUNTEST 940996) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1201570 | PROGRAMMING EQUIPMENT, PR600 ALL ELT'S | 8 | |
| 1250-0595 | KEYSIGHT (AGILENT) TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12515G-14 | AIRCRAFT COMMUNICATION EQUIPMENT DAVID CLARK H3313 | 7 | |
| 12PRE65B00161-1 | PROTECTIVE EQUIPMENT -0 PIVOT | 8 | |
| 13-6600-3600 | RAM AIR TURBINE (RAT) TEST EQUIPMENT | 8 | |
| 13-6601-3600 | RAM AIR TURBINE (RAT) TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 131052-1 | PLACARD (I.D. ELE. EQUIPMENT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 14-6804-6000 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 21 | |
| 14-6883-0110 | MAIN WHEEL STOWAGE EQUIPMENT | 10 | |
| 140040-RFX | AIRCRAFT WEIGHING EQUIPMENT PLATFORM | 2 | |
| 14ME65-72761-1 | Mechanincal Equipment - MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 14OHME65B00184 | Overhead Equipment -Inboard And Outboard Elevator Sling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15-5093-00 | EQUIPMENT CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1501W | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15080-00 | EQUIPMENT - PERSONNEL, VACUUM PAD - FLIGHTLINE KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 150MIT65B00112 | SPOTFACE EQUIPMENT - CORROSION REMOVAL, WING BOX SKINS | 2 | |
| 155800-02C5-7C-4 | WEIGHING EQUIPMENT ELECTRICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15701-00 | EQUIPMENT - PERSONNEL, VACUUM PAD - FLIGHTLINE KIT | 1 | |
| 15701-01 | EQUIPMENT - PERSONNEL, VACUUM PAD - FLIGHTLINE KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15702-00 | EQUIPMENT - PERSONNEL, VACUUM PAD - FLIGHTLINE KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15702-02 | EQUIPMENT - PERSONNEL, VACUUM PAD - FLIGHTLINE KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15703-00 | EQUIPMENT - PERSONNEL, UPPER WING - VACUUM PAD - LIFELINE KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 15704-00 | EQUIPMENT - PERSONNEL, UPPER WING - VACUUM PAD - LIFELINE KIT | 1 | |
| 15705-00 | EQUIPMENT - PERSONNEL, UPPER WING - VACUUM PAD - LIFELINE KIT | 1 | |
| 15G7603-1000 | 220 INPUT VOLTAGE/50 HZ FREQUENCY 15G7603-1000 | TRONAIR - AIRCRAFT GROUND SUPPORT EQUIPMENT | 6 | |
| 17-TES0043 | PORTABLE INTERFACE UNIT ALONG WITH READ OUT SUPPORT EQUIPMENT SOFTWARE | 22 | |
| 17-TES0060 | ROSE (READ OUT SUPPORT EQUIPMENT ) ANALYSIS UNIT | 11 | |
| 17500S-2 | WHEEL CHANGE EQUIPMENT | 3 | |
| 175S-2 | WHEEL CHANGE EQUIPMENT | 10 | |
| 177090-06 / 765090-006 | ILLUSTRATED TOOL AND EQUIPMENT MANUAL ITEM 2454- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 17TES 0315 | GROUND SUPPORT EQUIPMENT (GSE) ROC/5 KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 17TES0043 | TEST EQUIPMENT | 22 | |
| 17TES0063 | SOFTWARE, READ OUT SUPPORT EQUIPMENT (ROSE) | 4 | |
| 17TES0065 | PORTABLE INTERFACE UNIT ALONG WITH READ OUT SUPPORT EQUIPMENT SOFTWARE | 5 | |
| 17TES0315 | GROUND SUPPORT EQUIPMENT (GSE) ROC/5 KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 17TES0321 | SOFTWARE, READ OUT SUPPORT EQUIPMENT (ROSE) | 8 | |
| 1851-07 | Langa 1851-07 Laser Target Equipment | 1 | |
| 18821-3 | PITOT TEST ADAPTOR, NAV-AIDS PITOT STATIC TEST EQUIPMENT AND RVSM AIR DATA ACCESSORIES KITS | 3 | |
| 18821-4 | ADAPTER: PITOT STATIC, TEST EQUIPMENT | 7 | |
| 18ME65B00116 | HANDLING EQUIPMENT | 8 | |
| 19-4301-0000 | EQUIPMENT - POTABLE WATER SERVICING | 7 | |
| 19-4303-0000 | EQUIPMENT - POTABLE WATER SERVICING | 4 | |
| 19-4305-0000 | CART,POTABLE WATER EQUIPMENT | 10 | |
| 1936T22G01 | ENGINE DIAGNOSTIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1945-04-08 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | 2 | |
| 1945-04-09 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | 5 | |
| 1945-04-13 | TEST EQUIPMENT ENGINE BLEED AIR SYS - REVERSE FLOW | 2 | |
| 19ME65B00116 | HANDLING EQUIPMENT | 6 | |
| 19ME65B00116-1 | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 19ME65B00116-2 | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1XACESATR42 | 1XACESATR42/72PROPELLERBALANCEEQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2-067 | MEASUREMENT CONDUCTIVITY, EQUIPMENT | 2 | |
| 2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| 2-164 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 3 | |
| 2-837 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 1 | |
| 20-4505-7000 | OXYGEN LEAK CHECK EQUIPMENT | 8 | |
| 2000-150 | EQUIPMENT STORAGE BAGS (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2002443 | LC100G Galvanized Low Profile Lav Cart. Includes all hoses & couplers required to service aircraft. 68-gallon waste, 36-gallon fill. Honda gas pump system (max 72gpm/54psi), backup hand pump, flow meter included as standard equipment. (prev P/N 001646G) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2002454 | POTABLE WATER SERVICING EQUIPMENT | 1 | |
| 2002455 | POTABLE WATER SERVICING EQUIPMENT | 1 | |
| 20875A42 | RIGGING BAR EQUIPMENT - ELEVATOR TAB C27028-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2095-TE | TANK TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 20HME65B00784-1 | SUPPORT EQUIPMENT APU | 4 | |
| 21506104 | TEST EQUIPMENT TH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 216-00288-000 | EQUIPMENT-STATION, GROUND(SFIM FDR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2198-310 | EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2229738-8 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2229738‐7 | TEST EQUIPMENT | 3 | |
| 229-050575-01 | BORESIGHTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2309-T006-001 | SOCKET- REMOVAL/INSTALLATION, LOCK NUTILLUSTRATED TOOLAND EQUIPMENT MANUAL | 13 | |
| 23226 | TORQUEEQUIPMENT-VERTICALFIN,ELECTRICAL-POWEREDTORQUEONLYSYSTEM | 2 | |
| 23ME65B00116 | FIXTURE EQUIPMENT | 12 | |
| 243-9119-00 | TOOLS FOR ELECTRICAL EQUIPMENT MI8/24 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2454-GSE357 | INTERFACE ASSEMBLY - ILLUSTRATED VADR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2545C-02 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | 3 | |
| 2546B-01 | VACUUM TEST EQUIPMENT - VACUUM WASTE | 4 | |
| 2546C-02 | VACUUM TEST EQUIPMENT - VACUUM WASTE | 4 | |
| 259-109-10X-SSS | SOFTWARE - ADVANCE AIRBORNE VIBRATION MONITORING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 25H8Y11-1A | KIT - EQUIPMENT ALIGNMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26MG | MEDIDOR DE ESPESSURA (EQUIPMENT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2740751800 | EQUIPMENT-HOIST, THSA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 28007-9 | WING DRY BAY PRESSURIZATION EQUIPMENT | 1 | |
| 290121-4 | PRESSURE REGULATOR EQUIPMENT | 2 | |
| 2906K7 | AIRCRAFT GREASING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2A365 | TORQUE METER TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81030G01 | ENGINE DIAGNOSTIC EQUIPMENT | 2 | |
| 2C81703P01 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 2C90298G0 | ENGINE CLEANING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90298G01 | COMPRESSOR, CLEANING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90298G02 | ENGINE CLEANING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2LA007417-02 | MODULE EQUIPMENT | 1 | |
| 2ME65-73700-1 | SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2ME65-73700-1-SWA | SUPPORT EQUIPMENT, PARTIAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2ME65B00162 | Mechanical Equipment -Torsion Link Support | 4 | |
| 2ME65B18302 | MECHANICAL EQUIPMENT - LOWER RUDDER TO TAB LOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2ME65B18304 | MECHANICAL EQUIPMENT - UPPER RUDDER TO TAB LOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT60B00010 | DISPATCH EQUIPMENT - CONSTANT SPEED DRIVE (CSD)/GENERATOR JT9D-3 AND -7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B51544 | Gage Equipment -Main Door Latch | 6 | |
| 2MIT65B60225 | INSTALLATION/REMOVAL EQUIPMENT - FREON BOTTLE | 1 | |
| 2MIT65B80174 | LOCK ASSEMBLY - DOOR, BLG (FLYAWAY EQUIPMENT) | 10 | |
| 2OHME65B00780-1 | SLING EQUIPMENT - APU REAR MOUNT | 3 | |
| 2OHME65B00784-1 | OVERHEAD MECHANICAL EQUIPMENT SUPPORT - APU EXHAUS | 4 | |
| 2OHME65B04308 | Overhead Mechanical Equipment Sling -Forward And Aft Cargo Doors | 1 | |
| 2OHME65B07930 | Overhead Mechanical Equipment -Sling. Radome Assembly | 1 | |
| 2OHME65B67443 | SLING EQUIPMENT – SLIDE REMOVAL, STRETCHED UPPER DECK | 1 | |
| 2PRE65B00040 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2PRE65B00163-1 | PROTECTIVE EQUIPMENT - SPINDLE ASSEMBLY, JURY STRUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65-45113 | Test Equipment -Auto Speed Brake Test Box | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65-73720-1 | TEST EQUIPMENT - RIGGING TOOL, INBOARD FLAP | 1 | |
| 2TE65B00184 | TEST EQUIPMENT ACTUATOR | 5 | |
| 2TE65B40004 | TEST EQUIPMENT PACK INSTL A/C PACK NO 1,2 & 3 | 4 | |
| 2TE65B63076 | TEST EQUIPMENT SIMULATOR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65B81118 | TEST EQUIPMENT - LEVER ARM STOP, POWER PACK ASSEMBLY, INBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65B92603 | TEST EQUIPMENT FUEL ADAPTER JETTISON SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TME65B00726 | TRANSPORTATION MECHANICAL EQUIPMENT - SIDE COWL PANEL ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TSJ60B80099 | BREAKOUT BOX EQUIPMENT | 1 | |
| 3-097-360120 | TEST EQUIPMENT - BLADDER LEAKAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3008-550 | LEVERAGE ADAPTER EQUIPMENT (SCREW EXTRACTOR) | 2 | |
| 301-2817 | NEC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 303636A | INFLATE/DEFLATE DEVICE EQUIPMENT | 1 | |
| 3096000 | ALTERNATE BRAKE RESERVOIR FILLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 31-196-100 | SIMULATOR AND TEST EQUIPMENT N1 SYST. | 1 | |
| 31-37-100 | ZEROING EQUIPMENT SYNCHRO RESOL | 3 | |
| 31-590-100 | ZEROING EQUIPMENT | 2 | |
| 3101A53610296 | EQUIPMENT-GRINDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3108AS600-1 | R/I EQUIPMENT-WING PYLON FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 314T07689-401 | EQUIPMENT, ADJUSTING-FUEL FLOW | 1 | |
| 315A2258-2 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | 8 | |
| 3170029-1 | TENSION ADAPTER CALIBRATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3170029-1 THRU -4 | TENSION ADAPTER CALIBRATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3171005-001 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 3203771 | SYSTEM SUPPORT KIT (N2 FILLING EQUIPMENT) | 1 | |
| 3214-30 | EMERGENCY BATTERY TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3240-D09-1212 | KIT EQUIPMENT SPIN-U | 2 | |
| 332A92-7231-00 | BLANKING CAP, ELEC EQUIPMENT 130X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 332A97-6701-00 | TEST STATION,ELECTRICAL-ELECTRONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 33519001 | EQUIPMENT MAINTENANCE CASE | 1 | |
| 3402248-1 | GROUND HANDLING EQUIPMENT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 34036950 | EQUIPMENT-SETTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92129-0005 | MICRO SWITCHES TEST BOX - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92175-0001 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92175-0003 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92178-0001 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92178-0002?? | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92178-0002 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92179-0001 | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92179-0001?? | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| 35-92179-0001 | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92180-0001 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92180-0005 | GAUGE - CONTROL WHEEL - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92180-0005 | GAUGE - CONTROL WHEEL - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-93156-0003 | FIN HOIST SLING - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-93156-0005 | ARTCU TROUBLESHOOTING BOX - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-93379-0001 | BALANCE EQUIPMENT | 1 | |
| 3501A53610296 | GRINDING EQUIPMENT (F6198) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 350A94-2720-00 | THROTTLE RING FRICTION MEASURE EQUIPMENT | 1 | |
| 35M5M01270000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 4 | |
| 368-15-00-97474-000 | B767 MECHANICAL EQUIPMENT JACK | 1 | |
| 368-15-00-97475-000 | B767 MECHANICAL EQUIPMENT SUPPORT JACK | 1 | |
| 368-15-00-97476-000 | B767 MECHANICAL EQUIPMENT SUPPORT JACK | 1 | |
| 3792195-1 | PRESSURE REGULATOR EQUIPMENT | 8 | |
| 37N00001-3 | EQUIPMENT - TEST, DECOMPRESSION(S-52-051-05-02) | 6 | |
| 38DLPLUS | THICKNESS GAGING EQUIPMENT | 1 | |
| 39300-40002-10 | SIMULATOR, RADAR TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3940-99-349-4939 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 39995380 | TEST EQUIPMENT FCD66 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 39995381 | MKII TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3C3461G01 | CRADLE,GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3C3461G02 | CRADLE,GROUND HANDLING EQUIPMENT | 2 | |
| 3FME001A7000 | FLOOR MOUNTED EQUIPMENT VERTICAL FIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G5305G00332 | SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3MIT65B00713 | MISCELLANEOUS TOOL KIT - BOOTSTRAP EQUIPMENT, JT9D POWER PLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3MIT65B94600 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3OHME65B00002 | EQUIPMENT RECOVERY A | 1 | |
| 3OHME65B00161-950 | Overhead Mechnical Equipment | 1 | |
| 3OHME65B00162-950 | OVERHEAD EQUIPMENT - CLAMP AND HOISTING TOOL - NOSE GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3PME65B80562 | PORTABLE MECHANICAL EQUIPMENT - DRIVE MECHANISM ASSEMBLY, STABILIZER TRIM | 1 | |
| 3PRE65B00162-1 | PROTECTIVE EQUIPMENT - STRAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3PRE65B00163-1 | PROTECTIVE EQUIPMENT - DRAG STRUT PIN, SHOCK STRUT, BODY LANDING GEAR | 5 | |
| 3TE60B50308 | SIMULATOR TEST EQUIPMENT - SPHERICAL GAS RESERVOIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B001102 | TEST EQUIPMENT - PRESSURE PLUG, JETTISON PUMP SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B40017 | TEST EQUIPMENT - PRESSURE RELIEF VALVE INSTALLATION STA. 770 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B40677 | TEST EQUIPMENT - SENSITIVITY TEST SLUG SET, PROXIMITY SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B63076 | TEST EQUIPMENT -0 SIMULATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B81118 | TEST EQUIPMENT, POWER PACK ASSEMBLY | 1 | |
| 3TE65B92203 | TEST EQUIPMENT -0 DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4000-110 | RAMP TEST EQUIPMENT | 1 | |
| 4016650 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4027560-9000 | AUTOMATIC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4027560-912 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4036800-905 | AUTOMATIC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4036800-9800 | AUTOMATIC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 40HME65B94600 | BOOT STRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 40I013 | EDDYCURRENTEQUIPMENT) | 1 | |
| 410DME-10AR | HYDRAULIC LEAK CHECK EQUIPMENT FLOWMETER | 1 | |
| 410DME-1OAR | EQUIPMENT - HYDRAULIC LEAKAGE CHECK | 1 | |
| 42-60-066.0 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 422330M0NT3 | MEASUREMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 422330M0NT4 | MEASUREMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 423085M0NT12 | EQUIPMENT SUPPORT BASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 42315-60-221 | HOIST ROLLER CABLE REPLACEMENT EQUIPMENT | 1 | |
| 42A12 | ULTRASONIC TEST SET (TS200 TEST EQUIPMENT FOR AIRCRAFT LOCATOR BEACON) | 4 | |
| 42A12A | DUKANE TESTING EQUIPMENT | 4 | |
| 42A12D | TEST EQUIPMENT FOR FDR LOCATION BEACON IN WATER | 10 | |
| 43-1096 | HOIST EQUIPMENT | 1 | |
| 43/1096 | HOIST MLG - HOIST EQUIPMENT 10 CWT | 1 | |
| 4558096 | EQUIPMENT FOR MLG & NLG FOR AIRBUS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 46077695 | FCD66 & FCD66 MKII TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460002701 | Test Equipment- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460003100 | LP TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460005889 | POTENTIOMETER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006942 | BACKLASH TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460006960 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460007029 | LIFTING EQUIPMENT SUPSD BY 460007182 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460007102 | Lift Equipment | 8 | |
| 460007175 | ALIGNMENT EQUIPMENT | 5 | |
| 460007182 | LIFTING EQUIPMENT | 1 | |
| 460007190 | EXTRACTION EQUIPMENT | 2 | |
| 460007387 | EQUIPMENT-LIFTING | 2 | |
| 4306065051 | TEST SET-WHEEL MOUNTED EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4306065051-1000 | TEST SET-WHEEL MOUNTED EQUIPMENT | 2 | |
| 44-349 | HOIST EQUIPMENT | 1 | |
| 4500-5138-001 | AMAT HUD MOD EQUIPMENT | 1 | |
| 4600067102 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 48-C0-001 | 757/727 STATIC BALANCE EQUIPMENT | 1 | |
| 4940002516475 | CORROSION CONTROL EQUIPMENT SPARES:- PAINT SHAKER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4MIT65B80307-1 | ADAPTER EQUIPMENT - CONTROL WHEELS | 32 | |
| 4MIT65B89603 | DISPATCH EQUIPMENT - CONSTANT SPEED DRIVE (CSD)/GENERATOR, RB211-524 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4OHME65B94600 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4PRE65B00161-1 | PROTECTIVE EQUIPMENT - UPPER SPINDLE ASSEMBLY, WING LANDING GEAR | 5 | |
| 4PRE65B00163-1 | PROTECTIVE EQUIPMENT - ACTUATOR BOSS INSERT, OUTER CYLINDER ASSEMBLY, BODY LANDING GEAR | 7 | |
| 4TE60B50308 | SIMULATOR TEST EQUIPMENT - CYLINDER GAS RESERVOIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4TE65B63076 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 500-0068 | PRESSURE TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 500-HP 18S-M | HYDROSTATIC TEST EQUIPMENT, (OR TEST EQUIPMENT PER 49 CFR 180.205(G)) | 1 | |
| 500-HP-18S-M | HYDROSTATIC TEST EQUIPMENT (OR TEST EQUIPMENT PER 49 CFR 180.205(G)) | 1 | |
| 50HME65B94600 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 510E | EQUIPMENT COOLING TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 511-LPB | EQUIPMENT COOLING TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 513.61.12.002 | EQUIPMENT PROP, DYNAMIC BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5171A0000-01 | HOLDING EQUIPMENT | 1 | |
| 52391A0000-01 | TEST EQUIPMENT SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 525ATE | Illustrated Tool & Equipment Manual Cessna CJ2 and CJ2+ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 52658A2000-01 | EQUIPMENT SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 52658A9000-01 | MEASUREMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 534910708 | SLING EQUIPMENT - APU B737 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 545-Н046-00 | SPRING STRETCHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5475001-1 | GROUND SUPPORT, RIGGING, AND TEST EQUIPMENT KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 550T05761-401 | SUPPORT,ASSY-MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5900T14 | Barrier - Safety, Electrical Equipment Access/Crew | 4 | |
| 59135A0000-01 | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5923792-505 | Calibration Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5952920-1 | Tow Equipment | 1 | |
| 5ME65B01900 | MECHANICAL EQUIPMENT - OUTBOARD TRAILING EDGE FLAP | 6 | |
| 5ME65B02000 | MECHANICAL EQUIPMENT - TRAILING EDGE FLAP MAIN CARRIAGE, INBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5MIT65B94600 | DISPATCH EQUIPMENT - CONSTANT SPEED DRIVE (CSD)/GENERATOR CF6-50 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5TE65B63076 | TEST EQUIPMENT SIMULATOR - STEERABLE POWER DRIVE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6 68SKAD208 | CRADLE,GROUND HNDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6-71-A71001-191 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 600000204 | TEST - EQUIPMENT, RAT | 1 | |
| 6000AS Minus Jaws | 6000AS with all equipment EXCEPT jaws | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 60P2800001Z001TEQ | FUEL TANK LEAK TEST EQUIPMENT GSE2820514 OR EQUIVALENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 60P5328001N001SAF | SAFETY EQUIPMENT RAT ENCLOSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610A270-C | BELT FORWARD MOORING EQUIPMENT DKS.21XL.C.00 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610A270-D | ARJ MOORING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610A280-A | BELT TYPE MAIN LIFT AND STAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610A381-B | BELT WING MOORING EQUIPMENT (LEFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 610A382-B | BELT WING MOORING EQUIPMENT (RIGHT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 612A090-C | FIRE LINE LEAK TESTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 621A020-A | REAR EQUIPMENT COMPARTMENT WORKING LADDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 621A030-A | REAR EQUIPMENT BAY MAINTENANCE PEDAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 622-9418-001 | RADIO HF-9000 TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6233C-50 | PE ACCELEROMETER - VIPER EQUIPMENT | 1 | |
| 627A250-A | CONTROL SURFACE LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 62800VLR14136290004 | EQUIPMENT | 2 | |
| 628A020-C | FUEL OIL SAMPLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 628A090-F | FUEL TANK DEPOSITING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 628A100-A | FUEL LINE LEAK TESTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 628A140-B | FUEL TANK DEPOSITING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6340K000 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 635A030-A | CABIN PRESSURE ADJUSTMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 64001-14J5 | AIRCRAFT JACKWEIGH EQUIPMENT | 2 | |
| 64310-10 | SURVIVAL EQUIPMENT | 1 | |
| 662-9420-001 | MAINTENANCE KIT, ELECTRONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 670-13734-00 | RIPS BATTERY MAINTENANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 670A | BONDING EQUIPMENT TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 682003008 | TEST EQUIPMENT | 10 | |
| 68D290050-1003 | CRADLE,GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6400G02131 | T/R TAPERED FLANGE INSTALLATION SAFETY EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6FT001-101 | TOOL - REFORM, ADAMS FLANGE SPIDER DUCT (SET OF THREE SIZES FOR TYPICAL DUCT DIAMETERS) (INNOVATIVE SUPPORT EQUIPMENT) | 6 | |
| 6ME65B00161-1 | LOCK - GROUND, WING AND BODY GEAR (FLY AWAY EQUIPMENT) | 12 | |
| 6ME65B00163-951 | MECHANICAL EQUIPMENT - BODY MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6MIT65B00163 | TORQUE EQUIPMENT KIT | 4 | |
| 6MIT65B00163-M | TORQUE EQUIPMENT, TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6PRE65B00161-1 | PROTECTIVE EQUIPMENT - SPINDLE ASSEMBLY, JURY STRUT, WING LANDING GEAR | 3 | |
| 6TE65B00114 | TEST EQUIPMENT RIGGING BAR | 11 | |
| 6TE65B63076 | TEST EQUIPMENT - SIMULATOR, STEERABLE/RETRACTABLE POWER DRIVE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7 HEL 092 | PRECISION BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 703A94-0000-00 | PLAY MEASURING EQUIPMENT | 1 | |
| 703A97-7210-00 | AIRSPEED METER TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7134770-10 | CRADLE,GROUND HANDLING EQUIPMENT | 1 | |
| 7134771-10 | CRADLE,GROUND HANDLING EQUIPMENT | 1 | |
| 728-0455-01 | FACTORY TEST EQUIPMENT (FTE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 72P2500002-001 | GVII-G500 FLYAWAY GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 72P5210111A083HE | MED HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 73-0067-02 | ENGINE GROUND OIL SEAL EQUIPMENT | 1 | |
| 737-27A1271 | PNEUDRAULIC HUCK INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 75-705 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 751587-007 | STRAP - UTILITY (INCLUDED IN J32014, LOWER BEARING SEAL REPLACEMENT EQUIPMENT) | 1 | |
| 757706-02 | ATE158 TEST EQUIPMENT INCLUDING ITS CABLES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 772B MK2 | TURNER INFLATION EQUIPMENT | 8 | |
| 772BMK2 | TURNER INFLATION EQUIPMENT | 8 | |
| 78004-90 | SLING EQUIPMENT - GE90 FAN T/ REV (ATTACH FITTING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 78009-5 | THRUST REVERSER MAINTENANCE LOCK EQUIPMENT | 1 | |
| 7HEL087 | T/R BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7M00069 | TEST STATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7ME65-73761-1 | MECH. EQUIPMENT - SPANNER WRENCH, FWD TRUNNION BRG (MLG) - 737-100/200/300/400/500 | 17 | |
| 7PRE65B00161-1 | PROTECTIVE EQUIPMENT - SPINDLE BOLT ASSEMBLY, JURY STRUT, WING LANDING GEAR | 3 | |
| 7TE65-46509-1 | Test Equipment - Boost Pump Conduit Air Inlet | 1 | |
| 7TE65-46517 | TEST EQUIPMENT STRUCTURAL VENT PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 802-01XX | EQUIPMENT-STATION, GROUND(SFIM FDR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 802-02XX | EQUIPMENT - STATION, GROUND (SFIM FDR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 81367289 | BORESCOPE ENGINE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-133 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-167 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-169 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-174 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-175 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 825010-98 | GANTRY EQUIPMENT - PASSENGER SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 828018-26 | TEST EQUIPMENT - FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 828018-28 | TEST EQUIPMENT - FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 830001-7 | Test Equipment - Windshield Repellent System | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 830002-1 | Test Equipment - Windshield Rain Repellent System | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 840-0031-00 | CMU GROUND EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 842-652012-1 | PRESSURE EQUIPMENT, AR RECEPTACLE MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 842-652014 | TEST EQUIPMENT, BOOM DAMPING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8489-55-L | OIL SERVICE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 854004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856-8022-010 | SDU-906TESTEQUIPMENTKIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1115 | TESTING EQUIPMENT | 3 | |
| 856A1115G07 | TESTING EQUIPMENT | 15 | |
| 856A1353G01 | HPTCC SYSTEM TEST EQUIPMENT | 7 | |
| 856A1480G01 | Hold Open Equipment - Thrust Reverser Cowl, CFM56-7 Engine | 11 | |
| 856A2605G12 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G13 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G17 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G18 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G20 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G21 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2605G22 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2633G04 | KIT TRIMM BALANCE EQUIPMENT | 1 | |
| 856A2633G05 | KIT TRIMM BALANCE EQUIPMENT | 2 | |
| 856A2636G01 | KIT TRIMM BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2645G02 | ENGINE EXCHANGE EQUIPMENT | 4 | |
| 856A2645G055 | ENGINE EXCHANGE EQUIPMENT | 1 | |
| 856A2675 | TOOL SET, LEAK TEST- AGB/EQUIPMENT CAVITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2675G01 | TOOL SET,LEAK TEST AGB/EQUIPMENT CAVIT | 5 | |
| 856A2675G02 | TOOL SET,LEAK TEST AGB/EQUIPMENT CAVITY. | 2 | |
| 86-01-35293-100 | TEST EQUIPMENT-DIMMER INDICATOR LIGHT BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 86-01-35317-100 | TEST EQUIPMENT-COLLING SYSTEM LOGIC BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 860135940 | AUTOMATIC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8731 CAL | CALIBRATION EQUIPMENT FOR TORQUING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 878009-26 | T/R MA/NT. LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 88-5914 | EQUIPMENT - SAMPLING, FUEL | 5 | |
| 8816645000 | SPECIAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 860135309100001 | TEST EQUIPMENT-MASTER WARNING PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8856A2633G04 | KIT TRIMM BALANCE EQUIPMENT | 1 | |
| 8ME65B00161-1 | EQUIPMENT - MECHANICAL, DRAG BRACE SUPPORT STRAP, WING LANDING GEAR | 4 | |
| 8PRE65B00161-1 | PROTECTIVE EQUIPMENT BOLT | 4 | |
| 8T2400002008 | BATTERY DISCHARGER OUTSIDE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 901-15160-2 | BALANCE EQUIPMENT | 1 | |
| 904-21-06-622 | CORROSION TREATMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 904.21.06.623 | CORROSION TREATMENT EQUIPMENT, PRESSURE CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9043290-130 | SWAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 915-17840 | TRACK AND BALANCE EQUIPMENT | 2 | |
| 915-18205 | AIRCRAFT VIBRATION AND ANALYSIS AND CONTROL EQUIPMENT CHADWICK VXP | 1 | |
| 915-18632 | MAINTENANCE KIT ELECTRONIC EQUIPMENT | 3 | |
| 9222215.00 | NDT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 939-2 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 2 | |
| 94-8136 | EQUIPMENT -FUEL SAMPLING | 18 | |
| 9446M61G05 | HOIST EQUIPMENT - ENGINE MOUNTS AND THRUST LINKS | 2 | |
| 95-92 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92053-0001 | ARTCU TROUBLESHOOTING BOX - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92054-0001 | RIGGING TOOL - AOA TRANSMITTER - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92054-0003 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92070-0001 | RUDDER ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92070-0003 | GAUGE - CONTROL WHEEL - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92071-0001 | LH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92071-0002 | RH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92071-0003 | RUDDER ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND | 1 | |
| 95-92071-0004 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92083-0003 | MICRO SWITCHES TEST BOX - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92083-0005 | GAUGE - CONTROL COLUMN - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92134-0001 | PRESSURE GAUGE KIT - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92151-0001 | CRADLE,GROUND HANDLING EQUIPMENT | 1 | |
| 95-93032-0001 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 951-6710-001 | CMU GROUND EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95100TAAI3-03PE20-01 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 952-0035-002 | RECORDERSPORTABLE GROUND SUPPORT EQUIPMENT (RRPGSE) | 3 | |
| 952-0051-001 | EQUIPMENT, PLAYBACK TEST | 1 | |
| 952-0051-002 | EQUIPMENT, PLAYBACK TEST - VDR SYSTEM (PARTS II)BASE | 1 | |
| 956A6621 | TOOL SET - LEAK TEST - AGB/EQUIPMENT CAVITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A6621G01 | TOOL SET, LEAK TEST – AGB/EQUIPMENT CAVITY | 2 | |
| 956A7014 | LEAP TOOLING DISASSEMBLY AND ASSEMBLY EQUIPMENT FOR FLOW PANEL | 1 | |
| 956A7604 | KIT - INSTALL - EQUIPMENTS O-RING - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7604G01 | KIT INSTALL - EQUIPMENTS O-RING AGB | 4 | |
| 956A8074G01 | INLET EQUIPMENT | 2 | |
| 956A8610 | KIT - INSTALL - EQUIPMENTS O-RING - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8610G01 | KIT, INSTALL - EQUIPMENTS O-RING, AGB | 4 | |
| 956A8674G03 | DRAIN OIL EQUIPMENTS OF ENGINE | 1 | |
| 9599-607-11512 | RAMP TEST EQUIPMENT | 7 | |
| 964-0434-042 | RECORDER - PORTABLE GROUND SUPPORT EQUIPMENT (RPGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97104AB35100 | HOISTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97104AB351000 | HOISTING EQUIPMENT - MLG CROSS BRACE | 1 | |
| 9720-010 | HAND DRIVEN EQUIPMENT CRANE 9720-010EQUAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9744738 | MINIMITE EQUIPMENT (PROBE HOLDER) | 5 | |
| 97A21102043000 | PRESSURIZATION EQUIPMENT - APU BLEED AIR SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A21202042000 | BLANKING EQUIPMENT - APU BLEED AIR SYSTEM | 1 | |
| 97A27102024000 | TOOL MEASURING EQUIPMENT | 1 | |
| 97A27202011000 | MEASURING EQUIPMENT-RUDDER TRI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A27302009000 | LOCKING EQUIPMENT | 9 | |
| 97A27302010000 | MEASURING EQUIPMENT -PITCH TRIM CONTROL OPERATING LOAD | 2 | |
| 97A27602009000 | MEASURING EQUIPMENT - SPEEDBRAKE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A28002117002 | TEST EQUIPMENT JET PUMP | 36 | |
| 97A28002191000 | PRESSURIZATION EQUIPMENT-APU FUEL FEED SYSTEM | 4 | |
| 97A29002500000 | PROTECTIVE EQUIPMENT - RAT | 3 | |
| 97A29102061000 | PROTECTIVE EQUIPMENT - RAM AIR TURBINE | 4 | |
| 97A29102093000 | EQUIPMENT - HYDRAULIC SYSTEM DRAINING | 1 | |
| 97A29102094000 | EQUIPMENT HYDRAULIC TANK FILLING | 1 | |
| 97A32302001000 | MEASURING EQUIPMENT - EMERGENCY EXTENSION CONTROL LOAD | 2 | |
| 97A49602000000 | MEASURING EQUIPMENT - RAT CONTROL OPERATING LOAD | 2 | |
| 980-101-000-011 | CABLE – ADVANCE AIRBORNE VIBRATION MONITORING EQUIPMENT | 2 | |
| 98000 | EQUIPMENT RESCUE HOIST(600E1) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98000(600E1) | EQUIPMENT RESCUE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9899960002 | NI-CAD BATTERY CHARGER AND ANALYZER - TEST EQUIPMENT | 1 | |
| 98A21001000000 | I/R EQUIPMENT REFRIGERATION UNION | 2 | |
| 98A21003004000 | REMOVAL INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A21102043000 | PRESS. EQUIPMENT APU BLEED SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A22203500000 | CHECK AND ADJUSTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A26201000000 | EQUIPMENT-R/I,ENGINE FIRE EXTINGUISHER | 8 | |
| 98A27003000000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 9 | |
| 98A27203000000 | MEASURING EQUIPMENT - RUDDER PE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27203250000 | 98A27203250000 MEASURING EQUIPMENT - RUDDER PEDAL OPERATING LOAD | 3 | |
| 98A27203250002 | MEASURING EQUIPMENT - RUDDER P | 5 | |
| 98A27203250002-REP | Repair - MEAS Equipment Rudder Panel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27203501000 | MEASURING EQUIPMENT | 1 | |
| 98A27203501004 | MEASURING EQUIPMENT - RUDDER PE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27207585000 | EQUIPMENT-RUDDER NEUTRAL ADJUST | 1 | |
| 98A27208448000 | EQUIPMENT - ADJUSTMENT, RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27301002000 | MEASURING EQUIPMENT-THS DEFLECTION | 2 | |
| 98A27302010000 | MEASURING EQUIPMENT PITCH TRIM CTL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27303502000 | MEASURING EQUIPMENT T.H.S DEFL | 2 | |
| 98A27307545000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 7 | |
| 98A27308031000 | TEST EQUIPMENT | 1 | |
| 98A27309008000 | TEST EQUIPMENT-DETENT UNITS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27403000000 | MEASURING EQUIPMENT PITCH TRIM | 4 | |
| 98A27407518000 | ADAPTOR EQUIPMENT HOISTING THS | 2 | |
| 98A27407518001 | EQUIPMENT - HOISTING, THS ACTUATOR | 2 | |
| 98A27407518004 | HOISTING EQUIPMENT THS ACT | 1 | |
| 98A27408408002 | HOISTING EQUIPMENT - T.H.S. ACT | 6 | |
| 98A27501000000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 1 | |
| 98A27501500000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 3 | |
| 98A27501500001 | EQUIPMENT-R I FLAP POWER CONTROL UNIT | 1 | |
| 98A27503001000 | MANUAL DRIVE EQUIPMENT - WING FLAP CONTROL MECHANISM | 5 | |
| 98A27503504000 | MEASURING EQUIPMENT - FLAP AND | 1 | |
| 98A27601013000 | EQUIPMENT-LOCKING,SPEEDBRAKE CONTROL LEVER | 4 | |
| 98A27601014000 | ADJUSTING EQUIPMENT,SPOILER AND | 3 | |
| 98A27603009000 | EQUIPMENT-LOAD MEASURING | 1 | |
| 98A27603011000 | EQUIPMENT-LOAD MESUREMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27801000000 | EQUIPMENT -REMOVAL INSTALLATION,SLAT CONTROL UNIT | 2 | |
| 98A27803500000 | LOCKING EQUIPMENT - KRUEGER.FL | 4 | |
| 98A27808007000 | INSTALLATION EQUIPMENT - FLAP POWER CONTROL UNIT | 4 | |
| 98A27808021000 | HYDRAULIC LOCKING TEST EQUIPMENT-KRUEGER FLAP ACT | 3 | |
| 98A27808662000 | HYDRAULIC LOCKING TEST EQUIPMEN | 2 | |
| 98A27901001000 | LOCKING EQUIPMENT - CABLE TENSION REGULATOR | 8 | |
| 98A27903501000 | MEASURING EQUIPMENT - PITCH AND ROLL OPERATING LO | 5 | |
| 98A27903501001 | MEASURING EQUIPMENT - PITCH AND ROLL OPERATING LOA | 6 | |
| 98A28104000000 | SUMP DRAIN EQUIPMENT TOOL-FUEL | 36 | |
| 98A28104000002 | FILLING EQUIPMENT - TANK OIL | 25 | |
| 98A28203000000 | TEST EQUIPMENT JET PUMP | 7 | |
| 98A29103500000 | PROTECTIVE EQUIPMENT - RAT | 5 | |
| 98A32101502000 | HOISTING EQUIPMENT MLG ACTUATIN | 3 | |
| 98A32101506000 | REMINST REMOVAL, INSTALLATION EQUIPMENT | 3 | |
| 98A32103500000 | EQUIPMENT | 3 | |
| 98A32103500001 | EQUIPMENT-R I MLG DOORS | 2 | |
| 98A32103500005 | EQUIPMENT-R I MLG DOORS | 3 | |
| 98A32104158000 | EQUIPMENT - HOISTING, MAIN GEAR SIDESTAY | 6 | |
| 98A32201008000 | HOISTING EQUIPMENT | 2 | |
| 98A32203000000 | NOSE LANDING GEAR REMOVALTROLLEY INSTALLATION EQUIPMENT | 5 | |
| 98A32203000010 | A300 - NOSE LANDING GEAR R/I EQUIPMENT | 1 | |
| 98A32203500000 | HOISTING EQUIPMENT TOOL | 4 | |
| 98A53601000001 | HANDLING EQUIPMENT RADOME ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A53603004000 | RADIO EQUIPMENT RACK HOIST TOOL | 3 | |
| 98A54003104000 | PYLON EQUIPMENT-R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A54403025000 | SPECIAL SEARCH UNIT EQUIPMENT | 1 | |
| 98A54403026000 | SEARCH UNIT EQUIPMENT, SPECIAL | 6 | |
| 98A54603007000 | EQUIPMENT FOR CALIBRATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A55208320001 | HOISTING EQUIPMENT | 1 | |
| 98A57304009000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D07203005000 | ENGINE EQUIPMENT RECKS | 6 | |
| 98D27203000000 | MEASURING EQUIPMENT | 2 | |
| 98D27504041000 | TOOL KIT,MAINTENANCE,AIRCRAFT EQUIPMENT;|TOOL FLAP ADJUSTING;TOOL FLAP ADJUSTING; | 16 | |
| 98D27504082000 | ADAPTER SET,GROUND HANDLING EQUIPMENT;|TOOL FLAPS ADJUTING,TRACK4; | 21 | |
| 98D28004002000 | TOOL-TEST EQUIPMENT | 19 | |
| 98D28009002000 | TEST EQUIPMENT-APU FUEL FEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D28108417000 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D29003501000 | EQUIPMENT-HYDRAULIC RESERVOIRS FILL UNIT | 20 | |
| 98D29003501003 | EQUIPMENT-HYDRAULIC RESERVOIRS FILL UNIT | 15 | |
| 98D2920 8581 000 | PROTECTION EQUIPMENT RAT | 24 | |
| 98D2920755000 | RAT PROTECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D29207550000 | PROTECTION EQUIPMENT- RAT | 5 | |
| 98D29207550001 | PROTECTIVE EQUIPMENT RAT A320 | 10 | |
| 98D29208581 | PROTECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D29208581000 | PROTECTION EQUIPMENT - RAT | 24 | |
| 98D321040020 | EQUIPMENT - MLG RI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D3210400200 | EQUIPMENT MLG R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D32104002000 | EQUIPMENT-MLG, REMOVAL INSTALLATION | 11 | |
| 98D32104002000 | EQUIPMENT - MLG REMOVAL/INSTALLATION | 11 | |
| 98D321040020001 | EQUIPMENT-MLG REMOVA INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D32104002001 | EQUIPMENT MLG REMOVAL INSTALLATION | 17 | |
| 98D32104002002 | EQUIPMT EQUIPMENT MLG, REMOVAL INSTALLA | 13 | |
| 98D32104002003 | EQUIPMENT MLG, REMOVAL INSTALLATION | 12 | |
| 98D32104002103 | EQUIPMENT-MLG REMOVAL INSTALLATION | 2 | |
| 98D3210400900 | EQUIPMENT RI ACTUATOR (72 TON) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D32104009000 | EQUIPMENT REM ACTUATOR | 6 | |
| 98D32104009001 | EQUIPMENT -RI MLG ACTUATOR (PRE EV) | 9 | |
| 98D32104009002 | EQUIPMENT REM ACTUATOR | 2 | |
| 98D32104009003 | EQUIPMENT RI ACTUATOR (72 TON) | 4 | |
| 98D32104009004 | EQUIPMENT-R I OF THE MLG ACTUATOR | 4 | |
| 98D32104009005 | EQUIPMENT-R I OF THE MLG ACTUATOR | 4 | |
| 98D32104009006 | EQUIPMENT - R I OF THE MLG ACTUATOR | 10 | |
| 98D32104009006 | REM., INST. EQUIPMENT - MLG ACTUATOR | 10 | |
| 98D32104009006 | EQUIPMENT-R I OF THE MLG ACTUATOR | 10 | |
| 98D32104009007 | EQUIPMENT -RI MLG ACTUATOR (POST EV) | 14 | |
| 98D32104009007/98D32104009001 | EQUIPMENT-R I OF THE MLG ACTUAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D3210400903 | EQUIPMENT -RI MLG ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D32104009042 | EQUIPMENT REM ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D32104013001 | EQUIPMENT REMOVE / INSTALL SIDE STAY | 18 | |
| 98D32104013002 | EQUIPMENT R.I. SIDE STAY | 7 | |
| 98D32104013004 | EQUIPMENT R.I. SIDE STAY | 12 | |
| 98D3210401400 | EQUIPMENT-R I OF THE MLG ACTUATOR | 1 | |
| 98D32104190001 | equipment | 23 | |
| 98D32203002000 | EQUIPMNT EQUIPMENT | 1 | |
| 98D34003500000 | TOOLS - PITOT STATIC TEST EQUIPMENT | 30 | |
| 98D36109001000 | LEAP ENGINE STANDARD BLEED TEST EQUIPMENT | 8 | |
| 98D52004023040 | FACING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D52004023041 | FACING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D53103011000 | DRILLING EQUIPMENT | 5 | |
| 98D54003012000 | HOISTING,EQUIPMENT - PYLON | 1 | |
| 98D57004023040 | FACING EQUIPMENT | 3 | |
| 98D57004023041 | FACING EQUIPMENT - A321 ONLY | 1 | |
| 98D57004038000 | Boring Equipment | 8 | |
| 98D71203501001 | BOOTSTRAP EQUIPMENT - A320 FOR CFM56 & V25000 ENG | 30 | |
| 98D71203501002 | BOOTSTRAP EQUIPMENT | 11 | |
| 98F21001004000 | R I EQUIPMENT-PACK EXCHANGER | 1 | |
| 98F21001004001 | R/I EQUIPMENT - PACK EXCHANGER | 10 | |
| 98F21003001000 | EQUIPMENT,R I-PACK EXCHANGER | 2 | |
| 98F21503001000 | R/I EQUIPMENT-PACK | 4 | |
| 98F26203000002 | ENGINE FIRE EXTINGUISHING TEST EQUIPMENT | 3 | |
| 98F29208254000 | PROTECTIVE EQUIPMENT | 3 | |
| 98F30403001000 | TEST EQUIPMENT | 10 | |
| 98F32104005000 | HOIST-EQUIPMENT,SIDE STAY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F32104005001 | HOIST HOIST EQUIPMENT SIDE STAY, MLG | 3 | |
| 98F32104005002 | HOIST HOIST EQUIPMENT -0 SIDE STAY, ML | 4 | |
| 98F32104005003 | HOIST-EQUIPMENT,SIDE STAY, MLG | 3 | |
| 98F32104005004 | HOIST-EQUIPMENT,SIDE STAY, MLG | 5 | |
| 98F32104008000 | HOIST EQUIPMENT - PINTE PIN | 13 | |
| 98F32104008001 | HOIST HOIST EQUIPMENT - ACTUATOR, MLG | 3 | |
| 98F32104009000 | HOIST EQUIPMENT, PINTLE PIN | 12 | |
| 98F32104009001 | HOIST EQUIPMENT - PINTLE PIN WITHOUT STD WINDING | 8 | |
| 98F32104016001 | HOIST EQUIPMENT | 6 | |
| 98F32201000001 | EQUIPMENT NLG R/I | 12 | |
| 98F52003002001 | PROTECTIVE EQUIPMENT | 16 | |
| 98F52003002050 | PROTECTIVE EQUIPMENT | 2 | |
| 98F55308395044 | GROUND EQUIPMENT MANUAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98F71201006032 | Engine exchange equipment Bootstrap A330 | 11 | |
| 98F71201006080 | A330/340 BOOTSTRAP EQUIPMENT | 6 | |
| 98L20003001000 | HOISTING EQUIPMENT | 3 | |
| 98L54503021000 | POSITIONING EQUIPMENT | 1 | |
| 98RC5724021570 | TORQUE WRENCH EQUIPMENT | 1 | |
| 98S12005001000 | EQUIPMENT 98S12005001000 GIE ATR | 5 | |
| 98S28005002000 | EQUIPMENT 98S28005002000 GIE ATR | 2 | |
| 98S35105000000 | EQUIPMENT 98S35105000000 GIE ATR | 3 | |
| 98S45105000000 | EQUIPMENT 98S45105000000 GIE ATR | 2 | |
| 98S53205000000 | EQUIPMENT 98S53205000000 GIE ATR | 11 | |
| 98V24003001000 | R/I HEAVY LOAD EQUIPMENT | 5 | |
| 98V24209002000 | PROTECTION EQUIPMENT - RAT | 7 | |
| 98V26203000000 | A350 ENGINE FIRE EXTINGUISHING SYSTEM TEST EQUIPMENT | 1 | |
| 98V26203000002 | A350 ENGINE FIRE EXTINGUISHING SYSTEM TEST EQUIPMENT | 3 | |
| 99-791-573 | TEST EQUIPMENT | 2 | |
| 990.00.00.250 | ELT PROG & TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 991918 | SENSOR PLAY MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 991919 | TORQUE CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 999-6807-02 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 999-6807-03 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99A00692 | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99A32401001000 | EQUIPMENT-MEASURING,BRAKE PEDAL LOAD AND TRAVEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99A32401001001 | EQUIPMENT-MEASURING,BRAKE PEDAL LOAD AND TRAVEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99A55407320000 | INFRARED EQUIPMENT | 2 | |
| 99A55407321000 | INFRARED EQUIPMENT | 3 | |
| 99A55407326000 | INFRARED EQUIPMENT | 2 | |
| 99A92002050000 | TEST SET-CENTER PEDESTAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 99D54403000006 | Calibration equipment | 1 | |
| 99D57103016000 | ULTRASONIC EQUIPMENT | 7 | |
| 9C3124G01 | CLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C3124G03 | CLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 1 | |
| 9ME63B10494-1 | TETHER FITTING EQUIPMENT - TAIL SECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9PRE65B00161-1 | PROTECTIVE EQUIPMENT, BOLT - UPPER TRUNNION, WING LANDING GEAR | 3 | |
| 9TE65-45412 | Test Equipment -Vent Scoop Access Closure Plug | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9TE65-46517 | TEST EQUIPMENT CENTER TANK VENT PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A-E02010300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| A/C D/C YOKE | PORTABLE MAGNETIC PARTICLE INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A00001 | WELDING SPECIFICATION, GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A0125888 | TEST EQUIPMENT | 1 | |
| A06V2 | ELT REPROGRAMMING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07002-1 | EMERGENCY JACKING EQUIPMENT NLG | 4 | |
| A07002-11 | EMERGENCY JACKING EQUIPMENT - NOSE LANDING GEAR | 3 | |
| A07002-12 | Emergency jacking equipment-NLG | 3 | |
| A07003-15 | JACKING BAR EQUIPMENT | 1 | |
| A07006-1 | TORQUE MUTLIPLIER TENSION EQUIPMENT | 4 | |
| A07008-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07008-19 | JACKING BAR EQUIPMENT | 4 | |
| A07008-25 | JACKING BAR EQUIPMENT-MAIN LANDING GEAR AXLE | 1 | |
| A07008-26 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07008-27 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07008-28 | Jacking bar equipment-main landing gear axle | 2 | |
| A07008-29 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07009-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07010-1 | HOIST EQUIPMENT, W/OUT MLG *AIRCRAFT RECOVERY* | 2 | |
| A07010-2 | Hoist Equipment -Airplane Recovery. Without Main Landing Gear (Mlg) (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07011-1 | HOIST EQUIPMENT - AIRPLANE RECOVERY , WITHOUT MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A07011-2 | HOIST EQUIPMENT - AIRPLANE RECOVERY , WITHOUT MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A09003-2 | LOCKPIN - NOSE GEAR TOWING LEVER (* FLYAWAY EQUIPMENT *) | 33 | |
| A1-24001 | Bootstrap Equipment -Cf34 Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1-43-1096 | HOIST MLG -0 HOIST EQUIPMENT 10 CWT | 3 | |
| A1-44-349 | HOIST MLG -0 HOIST EQUIPMENT 25 CWT | 3 | |
| A1-91-139 | APU EQUIPMENT | 1 | |
| A1/43/1096 | MINI HOIST EQUIPMENT 500KG | 3 | |
| A1/44/349 | MINI HOIST EQUIPMENT 1270KG | 3 | |
| A10002-9 | MECHANICAL EQUIPMENT - PITOT STATIC PROBE | 16 | |
| A11019-000 | HOISTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A11019-1000 | EQUIPMENT - HOISTING | 1 | |
| A11116 | LIFTING EQUIPMENT -LIFTING, NLG | 2 | |
| A12001 | FUEL SAMPLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A12001-1 | FUEL SAMPLING EQUIPMENT | 3 | |
| A12001-14 | FUEL SAMPLING EQUIPMENT | 16 | |
| A12001-15 | Equipment - Sampling, Fuel | 15 | |
| A12002-14 | FUEL SAMPLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M | INTERFACE EQUIPMENT (RVSM) | 1 | |
| A1M-170-GE-1 | DATA ACQUISITION GAGING EQUIPMENT | 3 | |
| A1M-170B-KITNC | EQUIPMENT, DATA AC-QUISITION GAGING | 2 | |
| A1M-B737-GE | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-BCH-GE | GAGING EQUIPMENT A1M-BCH-GE BEECHCRAFT CORP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-CL-GEA | GAUGING EQUIPMENT RVSM | 3 | |
| A1M-CL-IEA | INTERFACE EQUIPMENT (RVSM) | 3 | |
| A1M-CL-IEA-1A | INTERFACE EQUIPMENT (RVSM) | 2 | |
| A1M-CL−GEA | GAUGING EQUIPMENT (RVSM) | 3 | |
| A1M-CL−IEA | INTERFACE EQUIPMENT (RVSM) | 3 | |
| A1M-CS-GE | GEOMETRIC INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-CS-KITNC | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-EMB-1E-1 | GSE 269 DATA TRANSMISSION & STORAGE INTERFACE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-EMB-GE | RVSM GAGING EQUIPMENT | 1 | |
| A1M-EMB-GE-1 | EQUIPMENT,GAGING | 3 | |
| A1M-EMB-GE-1C | DATA ACQUISITION GAGING EQUIPMENT | 1 | |
| A1M-EMB-GE-1 | DATA ACQUISITION GAGING EQUIPMENT | 3 | |
| A1M-EMB-GE1 | DATA ACQUISITION GAGING EQUIPMENT | 3 | |
| A1M-EMB-IE-1 | DATA TRANSMISSION & STORAGE INTERFACE EQUIPMENT | 2 | |
| A1M-EMB-IE-1C | DATA TRANSMISSION -AMP; STORAGE INTERFACE EQUIPMENT | 1 | |
| A1M-EMB-IE-1C-NC | INTERFACE SET EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-EMB-IE-IC-NC | INTERFACE SET EQUIPMENT | 1 | |
| A1M-EMB-KIT(NC)-C | DATA ACQUISITION, TRANSMISSION AND STORAGE EQUIPMENT | 1 | |
| A1M-EMB-KITNC | TEST EQUIPMENT | 3 | |
| A1M-EMB-KITNC-C | DATA ACQUISITION, TRANSMISSION AND STORAGE EQUIPMENT | 1 | |
| A1M-EMB-LE-1 | DATA ACQUISITION GAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-EMBA1M-EMB-IE-1C-NC | GSE 269 DATA TRANSMISSION & STORAGE INTERFACE EQUIPMENT | 1 | |
| A1M-G280-GE | GEOMETRIC INSPECTION GAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-GAL-GE | GEOMETRIC INSPECTION GAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-GAL-KITNC | GEOMETRIC INSPECTION GAGING EQUIPMENT | 1 | |
| A1M-LJ-GE | GEOMETRIC INSPECTION EQUIPMENT | 1 | |
| A1M-P100-IE-1BNC | INTERFACE SET EQUIPMENT | 1 | |
| A1M-P300 | RVSM, EQUIPMENT SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A1M-P300-IE-1BNC | INTERFACE SET EQUIPMENT | 1 | |
| A1M170GE1 | DATA ACQUISITION GAGING EQUIPMENT | 3 | |
| A1M−CL−GEA | Gauging Equipment (RVSM) | 3 | |
| A1M−CL−IEA | Interface Equipment (RVSM) | 3 | |
| A2-43-1091 | APU EQUIPMENT | 1 | |
| A20001-152 | Boom Hoist Equipment -General (400 Lb Capacity) (Ce) | 13 | |
| A20001-176 | BOOM HOIST EQUIPMENT - GENERAL (400 LB CAPACITY) | 1 | |
| A20001-185 | BOOM HOIST EQUIPMENT | 7 | |
| A20001-65 | BOOM HOIST EQUIPMENT - GENERAL (400 LB CAPACITY) | 10 | |
| A20001-82 | Boom Hoist Equipment - General (400 lb Capacity) | 7 | |
| A20001-82, -152 | BOOM HOIST EQUIPMENT - GENERAL (400 LB CAPACITY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A20001-83 | BOOM HOIST EQUIPMENT - GENERAL | 14 | |
| A20014 | FABRICATION OF FALL PROTECTION STITCHED ASSEMBLY SPECIFICATION - GROUND SUPPORT EQUIPMENT (GSE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21002-1 | REMOVAL/INSTALLATION EQUIPMENT - AVIONICS COOLING REFRIGERATION UNIT | 1 | |
| A21003-1 | TEST EQUIPMENT PRESSURE RELIEF CABI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21008-1-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21008-2-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21009-1 | BLANKING PLATE-EQUIPMENT COOLING MONITOR | 4 | |
| A21010-190 | VACUUM TEST EQUIPMEN | 9 | |
| A21010-203 | TEST EQUIPMENT - VACUUM PRESSURE RELIEF VALVE TEST | 11 | |
| A21010-30 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21010-57 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 3 | |
| A21010-63 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 2 | |
| A21010-69 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 3 | |
| A21010-70 | VALVE TEST EQUIPMENT | 5 | |
| A21010-72 | TEST EQUIPMENT | 2 | |
| A21011-1 | TEST EQUIPMENT - LOW LIMIT VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21011-6 | TEST EQUIPMENT(BT)TC/21-043-01-01 | 12 | |
| A21011-7 | VALVE TEST EQUIPMENT | 1 | |
| A21013-50 | Hoist Adapter Equipment -Air Conditioning Pack | 2 | |
| A21015-1 | DISPATCH EQUIPMENT - BLANK-OFF PLATE, TRIM AIR CHECK VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21015-8 | Dispatch Equipment -Blank-Off Plate. Trim Air Check Valve | 6 | |
| A21922-1000 | HYDRAULIQUE TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A22002 | Breakout box Equipment - 66 Pin electrical/ Insulator Resistance, Part Number - 73 Used on 737 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A22002-72 | BREAKOUT BOX EQUIPMENT - 66 PIN ELECTRICAL/INSULATION RESISTANCE | 3 | |
| A22002-73 | BREAKOUT BOX EQUIPMENT - 66 PIN ELECTRICAL/INSULATION RESISTANCE | 3 | |
| A22002-75 | BREAKOUT BOX EQUIPMENT - 66 PIN ELECTRICAL/INSULATION, RESISTANCE | 2 | |
| A22003-22 | Component Maintenance Equipment -Autothrottle Clutch | 1 | |
| A22008-1 | RIGGING EQUIPMENT - AUTOTHROTTLE BRAKE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A22008-17 | RIGGING EQUIPMENT - AUTOTHROTTLE BRAKE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A22008-25 | RIGGING EQUIPMENT | 2 | |
| A22008-26 | RIGGING EQUIPMENT - AUTOTHROTTLE BRAKE | 1 | |
| A22008-42 | Rigging Equipment -Autothrottle Brake (-400 & -8 Only) | 5 | |
| A24001-1 | HOIST EQUIPMENT - LRU'S MAIN EE BAY | 7 | |
| A24001-5 | HOIST EQUIPMENT - LRU'S MAIN EE BAY | 3 | |
| A24006 | HOIST EQUIPMENT APU BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A24006-1 | HOIST EQUIPMENT - APU BATTERY | 5 | |
| A24010 | DISPATCH EQUIPMENT IDG,CF6-80A AND CF6-80C2 ENGINE | 1 | |
| A24010-1 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR (IDG), CF6-80A AND CF6-80C2 ENGINES | 3 | |
| A25001-33 | REPLACEMENT EQUIPMENT - AIR CHILLER, FWD GALLEY | 5 | |
| A25001-83 | REPLACEMENT EQUIPMENT - AIR CHILLER, FWD GALLEY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A25004-1 | SIMULATOR EQUIPMENT - OFF-WING ESCAPE SLIDE DOOR LATCH OPENING ACTUATOR | 2 | |
| A25008-1 | Installation Equipment -Luggage Bin Snubber | 3 | |
| A25009-7 | SAFETY EQUIPMENT ESCAPE SYSTEM | 1 | |
| A25012-1 | TEST EQUIPMENT ESCAPE SLIDE | 2 | |
| A25012-19 | ELECTRICAL TEST EQUIPMENT - OFF-WING ESCAPE SLIDE SYSTEM | 2 | |
| A25012-29 | TEST EQUIPMENT ESCAPE SLIDE | 2 | |
| A25014-29 | Simulator Equipment -Latch Opening. Off-Wing Escape System | 5 | |
| A25016-01 | SAFETY EQUIPMENT SCAPE SYSTEM OFF-WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A25016-1 | SAFETY EQUIPMENT ESCAPE SYSTEM | 8 | |
| A25022-1 | TEST EQUIPMENT -PDU. GUIDES. AND ROLLOUT STOPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001 | ELECTRICAL TEST EQUIPMENT-BOTTLE SQUIB,FIRE EXTINGUISHER SYSTEM | 1 | |
| A26001-106 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-131 | Electrical Test Equipment -Bottle Squib. Fire Extinguisher System | 6 | |
| A26001-132 | ELECTRICAL TEST EQUIPMENT BOTTLE SQUIB FIRE EXTING SYSTEM | 1 | |
| A26001-134 | ELECTRICAL TEST EQUIPMENT BOTTLE SQUIB FIRE EXTING SYSTEM | 5 | |
| A26001-135 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 6 | |
| A26001-136 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 3 | |
| A26001-137 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 5 | |
| A26001-138 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 5 | |
| A26001-139 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 6 | |
| A26001-141 | ELECTRICAL TEST EQUIPMENT BOTTLE SQUIB FIRE EXTING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-144 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 3 | |
| A26001-145 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 3 | |
| A26001-148 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXT | 5 | |
| A26001-165 | ELECTRICAL TEST EQUIPMENT SQUIB FIRE EXT | 2 | |
| A26001-174 | ELECTRICAL TEST EQUIPMENT BOTTLE SQUIB FIRE EXTING SYSTEM | 3 | |
| A26001-175 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 5 | |
| A26001-176 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 4 | |
| A26001-182 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 4 | |
| A26001-191 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 8 | |
| A26001-191-REVY | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-192 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXT | 5 | |
| A26001-24 | Electrical Test Equipment -Bottle Squib. Fire Extinguisher System | 4 | |
| A26001-28 | TEST EQUIPMENT FIRE EXTINGUISHER SYS | 2 | |
| A26001-30 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-32 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-4 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 1 | |
| A26001-41 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26001-5 | ELECTRICAL TEST EQUIPMENT - BOTTLE SQUIB, FIRE EXTINGUISHER SYSTEM | 2 | |
| A26003-10 | TESTER REGULATOR EQUIPMENT | 11 | |
| A26003-12 | TEST EQUIPMENT - REGULATOR MANOMETER | 1 | |
| A26003-7 | TEST EQUIPMENT - REGULATOR, CARGO FIRE EXTINGUISHING (ETOPS) | 6 | |
| A26003-7-10 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A26004-1 | PLUG EQUIPMENT | 4 | |
| A26007-1 | PLUG EQUIPMENT | 6 | |
| A26007-2 | Plug Equipment -Discharge Nozzle. Cargo Compartme | 2 | |
| A260091-191 | ELECTRICAL TEST EQUIPMENT | 1 | |
| A27006-1 | HORI STAB TRIM ACT HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27006-41 | HOIST EQUIPMENT - HORIZONTAL STABILIZER TRIM ACTUATOR | 8 | |
| A27010-190 | TEST EQUIPMENT - PRESSURE RELIEF VALVE VACUUM TANK | 1 | |
| A27012 | SLING EQUIPMENT INBD OUTBD ELEVATOR SEGMENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27012-30 | SLING EQUIPMENT - INBOARD/OUTBOARD ELEVATOR SEGMENT | 8 | |
| A27012-30-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27013-1 | DEACTIVATION EQUIPMENT | 12 | |
| A27013-1-M | DEACTIVATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27015 | SLING EQUIPMENT INBD/OUTBD AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27015-1 | Sling equipment-inbd/outbd aileron | 7 | |
| A27016-22 | SLING EQUIPMENT, IB TE FLAP | 4 | |
| A27016-22-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27016-27 | Sling Equipment -Inboard Trailing Edge Flap | 11 | |
| A27016-27-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27016/A27027 | SLING EQUIPMENT OUTBOARD A27016+A27027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27017-41 | Sling equipment-leading edge slats | 9 | |
| A27021 | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021 REV G | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-124 | ADAPTER EQUIPMENT - CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-125 | ADAPTER EQUIPMENT | 3 | |
| A27021-29 | ADAPTER EQUIPMENT - CONTROL WHEEL (CONTAINS 2 EA -30 PROTRACTORS) ONE -30 IS FUNCTIONALLY IDENTICAL TO A 4MIT65B80307-1 (THE BOEING COMPANY) | 16 | |
| A27021-30 | CONTROL WHEEL ADAPTOR EQUIPMENT | 5 | |
| A27021-43 | ADAPTOR EQUIPMENT, CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-69 | ADAPTER EQUIPMENT - CONTROL WHEEL | 12 | |
| A27021-76 | ADAPTER EQUIPMENT CONTROL WHEELS | 2 | |
| A27021-83 | ADAPTER EQUIPMENT CONTROL WHEELS | 2 | |
| A27021-96 | Adapter Equipment -Control Wheel | 9 | |
| A27021-97 | ADAPTER EQUIPMENT CONTROL WHEELS | 8 | |
| A27021-97-M | ADAPTER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-98 | ADAPTER EQUIPMENT - CONTROL WHEEL | 11 | |
| A2702129 | ADAPTOR EQUIPMENT CONTROL WHEEL | 16 | |
| A27022-75 | SLINGEQUIPMENT-RUDDER.REMOVAL/INSTALLATION(CE | 1 | |
| A27022-81 | SLING EQUIPMENT -RUDDER. REMOVAL/INSTALLATION (CE | 10 | |
| A27025-1 | Rigging Equipment -Force Transducer. Elevator Control | 1 | |
| A27027-54 | OUTBOARD TE FLAP SLING EQUIPMENT | 1 | |
| A27027-58 | SLING EQUIPMENT | 3 | |
| A27027-59 | SLING EQUIPMENT | 7 | |
| A27037-1 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT MECHANISM | 1 | |
| A27040-18 | Check Equipment -Bearing Width | 2 | |
| A27041-161 | Test Equipment - Elevator Feel and Centering Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27041-175 | Test Equipment -Elevator Feel And Centering Unit | 2 | |
| A27041-176 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27041-177 | Test Equipment -Elevator Feel And Centering Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27041-188 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27042-1 | Functional Test Equipment -Spoiler Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27043-1 | TEST EQUIPMENT FIXTURE - INBD / OUTBD SPOILER ACTU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27057-1 | Protractor Bracket Equipment -Feel Centering And Trim Installation. Rudder Control | 2 | |
| A27057-13 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING & TRIM INSTL, RUDDER CONTROL | 3 | |
| A27057-13-M | PROTRACTOR BRACKET EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27057-9 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING & TRIM INSTL, RUDDER CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27058-60 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27060-11 | JIG EQUIPMENT - INBOARD AND OUTBOARD LEADING EDGE SLAT DRIVE AND TRAILING EDGE FLAP DRIVE POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27063-71 | BREAKOUT BOX EQUIPMENT -POSITION SENSORS. FLIGHT | 1 | |
| A27063-88 | BREAKOUT BOX EQUIPMENT - POSITION SENSORS, FLIGHT CONTROLS RIGGING | 3 | |
| A27063-91 | BREAKOUT BOX EQUIPMENT - POSITION SENSORS, FLIGHT CONTROL RIGGING | 12 | |
| A27070-48 | BEARING INST'L EQUIPMENT - ROTARY BEARING - ROTARY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27070-61 | BEARING INST'L EQUIPMENT - ROTARY BEARING - ROTARY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27070-63 | ASSEMBLY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27070-65 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27070-80 | Bearing Installation Equipment -Rotary Bearing Installation Equipment -Rotary Leading Edge Slat Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27071-123 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27071-125 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27071-48 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27071-84 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27072-55 | TEST FIXTURE EQUIPMENT - STABILIZER TRIM DRIVE MECHANISM (CE) | 2 | |
| A27072-61 | TEST FIXTURE EQUIPMENT - STABILIZER TRIM DRIVE MECHANISM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27079-78 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27079-89 | Test Equipment -Power Drive Unit. Te Flap And Le Slat Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27079-96 | TEST EQUIPMENT - POWER DRIVE UNIT, TE FLAP AND LE SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27081-1 | READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST STAND | 3 | |
| A27081-2 | READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST STANDS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27082-1 | DRILL JIG EQUIPMENT ELEVATOR TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27093-1 | TEST EQUIPMENT - T.E. FLAP ASYMMETRY FAULT ISOLATION (APPLICABLE TO 767-200/200ER/300 AND FOR AIRPLANES WITH FSEU 285T0049-28 OR LOWER.) | 2 | |
| A27093-27 | TEST EQUIPMENT - TE FLAPS ASYMMETRY FAULT ISOLATION | 5 | |
| A27104-1 | ELEVATOR EQUIPMENT LOCK | 1 | |
| A27110-1 | MOUNT EQUIPMENT | 5 | |
| A27110-20 | Mount Equipment | 1 | |
| A27110-27 | MOUNT EQUIPMENT - INBOARD AILERON RIGGING BAR | 1 | |
| A27111-1 | LOCK EQUIPMENT – ELEVATOR ACTUATOR | 3 | |
| A27111-11 | Lock Equipment - Elevator Actuator | 14 | |
| A27112-1 | RIGGING EQUIPMENT | 6 | |
| A27113-1 | Check Equipment -Breakout Torque. Elevator Controls Override | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27114-1 | REMOVAL / INSTALLATION EQUIPMENT PIVOT BEARING HORIZONTAL STABILIZER | 11 | |
| A27115-1 | TEST EQUIPMENT AILERON ACTUATOR | 1 | |
| A27115-34 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 1 | |
| A27115-41 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 1 | |
| A27115-41-CAL | Calibration - Test Equipment - Outboard Aileron | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27115-45 | TEST EQUIPMENT - OUTBOARD AILERON LOCKOUT ACTUATOR | 4 | |
| A27117-1 | TEST EQUIPMENT | 8 | |
| A27118-111 | Lock Equipment | 2 | |
| A27118-90 | Lock Equipment -Inboard And Outboard Te. Flap Linkage | 2 | |
| A27119-1 | HOLDING FIXTURE EQUIPMENT - GEAR ASSEMBLY, LE SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27120-43 | ASSEMBLY / DISASSEMBLY EQUIPMENT - ROTARY ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27122-1 | WRENCH EQUIPMENT - BEARING RETAINING NUT, INBOARD FLAP LINKAGE | 4 | |
| A27123-1 | Measurement Equipment Bevel Gear Teeth. Stabilizer Trim Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27124-1 | FORCE EQUIPMENT-RUDD | 5 | |
| A27124-36 | Rudder free play check force equipment | 11 | |
| A27124-36996996 | FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 1 | |
| A27124-4 | FORCE EQUIPMENT -RUDDER FREEPLAY CHECK (A27124-36) | 3 | |
| A27124-42 | FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 4 | |
| A27128-1 | REMOVAL/INSTALLATION EQUIPMENT - OUTBOARD FLAP | 5 | |
| A27129-1 | BREAKOUT EQUIPMENT - STABILIZER CONTROL SYSTEM RIGGING | 3 | |
| A27130-1 | LOCKOUT EQUIPMENT - LEADING EDGE SLAT DRIVE | 2 | |
| A28001-50 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28003 | VENTILATION EQUIPMENT-FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28003-1 | VENTILATION EQUIPMENT - FUEL TANK | 2 | |
| A28003-43 | VENTILATION EQUIPMENT - FUEL TANK | 2 | |
| A28003-44 | EQUIPMENT - VENTILATION, FUEL TANK | 3 | |
| A28003-77 | VENTILATION EQUIPMENT - FUEL TANK | 1 | |
| A28003-78 | VENTILATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28003-88 | VENTILATION EQUIPMENT – FUEL TANK | 3 | |
| A28003-88, -89, -90, -91 | VENTILATION EQUIPMENT - FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28003-89 | VENTILATION EQUIPMENT - FUEL TANK | 1 | |
| A28003-90 | VENTILATION EQUIPMENT FUEL TANK | 9 | |
| A28003-91 | VENTILATION EQUIPMENT | 11 | |
| A28004-1 | FUEL TANK PX RELIEF TEST EQUIPMENT | 4 | |
| A28005 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE SHROUD | 2 | |
| A28005-24 | TEST EQUIPMENT - LEAK AND PRESSURE APU FUEL LINE SHROUD | 8 | |
| A28005-35 | TEST EQUIPMENT - LEAK AND PRESSURE APU FUEL LINE SHROUD | 3 | |
| A28005-42 | TEST EQUIPMENT LEAK AND PRESSURE | 5 | |
| A28005-43 | TEST EQUIPMENT | 3 | |
| A28005-44 | TEST EQUIPMENT LEAK CHECK PRESSURE APU FUEL LINE SHROUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28005-48 | TEST EQUIPMENT APU FUEL LINE SHROUD LEAK | 20 | |
| A28005-49 | TEST EQUIPMENT LEAK CHECK PRESSURE APU FUEL LINE SHROUD | 1 | |
| A28005-50 | TEST EQUIPMENT - LEAK AND PRESSURE APU FUEL LINE SHROUD | 17 | |
| A28005-53 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 6 | |
| A28005-56 | TEST EQUIPMENT - LEAK AND PRESSURE APU SHROUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28005-81 | TEST EQUIPMENT - LEAK AND PRESSURE | 6 | |
| A28005-82 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE SHROUD | 9 | |
| A28005-83 | TEST EQUIPMENT - LEAK AND PRESSURE, AUXILIARY POWER UNIT (APU) FUEL LINE SHROUD | 5 | |
| A28008 | FITTING EQUIPMENT | 1 | |
| A28008-12 | FITTING EQUIPMENT - FUEL DRAIN SUMP | 2 | |
| A28011-48 | TEST EQUIPMENT -PRESSURE/LEAKAGE. FUEL LINES AND FITTINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28011-49 | Test Equipment -Pressure/Leakage. Fuel Lines And Fittings | 1 | |
| A28011-50 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28013-10 | ADAPTER EQUIPMENT -AIR SUPPLY. SURGE TANK | 1 | |
| A28013-11 | Adapter Equipment -Air Supply. Surge Tank | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A28014-1 | PHASE CHECKING EQUIPMENT - GROUND FAULT INTERRUPTER RELAY | 6 | |
| A28014-1-CAL | Calibration - Phase Checking Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A29006-19 | TEST EQUIPMENT - SWITCH, PRESSURE/THERMAL | 1 | |
| A3-06-3538 | ELT-DT GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A30002 | PLUG EQUIPMENT THERMAL ANTI ICING DUCT PRESSURE SWITCH TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A30002-1 | Plug equipment-thermal anti-icing duct，wing pressure switch test | 5 | |
| A320-53-1378-1 | CAPITOL EQUIPMENT | 1 | |
| A320-53-1379-1 | CAPITOL EQUIPMENT | 1 | |
| A32001-4 | WARNING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32005-34 | REPLACEMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32005-54 | Replacement Equipment Seal - Lower Bearing Seal | 9 | |
| A32005-74 | Replacement Equipment | 9 | |
| A32006 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32006-75 | SLING EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32006-77 | SLING EQUIPMENT-RETRACT ACTUATOR-MLG | 14 | |
| A32007-10 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32007-15 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32007-16 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32007-17 | PROTECTOR EQUIPMENT - AXLE AND AXLE THREAD, MAIN LANDING GEAR (MLG) | 12 | |
| A32008 | SLING EQUIPMENT MLG COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32008 REV B | SLING EQUIPMENT - MLG COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32008-1 | SLING EQUIPMENT-MLG COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32008-5 | SLING EQUIPMENT | 3 | |
| A32008-51 | Sling equipment-MLG components | 11 | |
| A32008-52 | SLING EQUIPMENT - MAIN LANDING GEAR MLG COMPONEN | 5 | |
| A32008-52-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32008-53 | SLING EQUIPMENT MLG COMPONENTS | 8 | |
| A32008-53-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32012-13 | WRENCH EQUIPMENT MLG | 26 | |
| A32013-1-M | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32016-17-M | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32017-1 | PULLER EQUIPMENT - FUSE BOLTS, FORWARD TRUNNION SUPPORT, MAIN LANDING GEAR (MLG) | 16 | |
| A32017-1-M | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32018-1 | EQUIPMENT - SPRING EXTENDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32022-1 | PROTECTOR EQUIPMENT - INTERNALLY THREADED AXLE, NLG | 27 | |
| A32023-1 | SLING EQUIPMENT - RETRACT ACTUATOR, NOSE LANDING GEAR | 8 | |
| A32026 | REMOVAL/INSTALLATION EQUIPMENT-RTLNNION PIN,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32026-2 | REMOVAL/INSTALLATION EQUIPMENT -0 TRUNNION PIN, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32026-57 | HOIST EQUIPMENT, NLG | 1 | |
| A32026-60 | REMOVAL/INSTALLATION EQUIPMENT - TRUNNION PIN, MAIN LANDING GEAR (MLG) | 11 | |
| A32029 | REPLACEMENT EQUIPMENT LOWER SEAL NOSE GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32029-26 | Replacement Equipment -Lower Seal. Nose Landing Gear (Nlg) | 5 | |
| A32029-48 | REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE GEAR | 2 | |
| A32029-50 | REPLACEMENT EQUIPMENT - LOWER SEAL, NOSE LANDING G | 13 | |
| A32030-12 | LOCK EQUIPMENT | 5 | |
| A32030-12-M | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32030-21 | LOCK EQUIPMENT - MLG, DOOR OPEN, SAFETY | 13 | |
| A32032-39 | Removal/Installation Equipment -Main Landing Gear (Mlg) | 6 | |
| A32032-52 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) | 6 | |
| A32032-64 | Rmvl/Instl Equipment | 12 | |
| A32032-65 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) | 11 | |
| A32036 | HOIST EQUIPMENT NLG INSTALLATION & REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32036-100 | HOIST EQUIPMENT - NLG INSTALLATION & REMOVAL | 8 | |
| A32036-43 | HOIST EQUIPMENT - NOSE LANDING GEAR NLG INSTALLA | 8 | |
| A32036-57 | SLING EQUIPMENT | 2 | |
| A32036-66 | HOIST EQUIPMENT - NOSE LANDING GEAR (NLG) INSTALLATION/ REMOVAL | 6 | |
| A32036-66-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32036-67 | HOIST EQUIPMENT – NLG | 10 | |
| A32047-1 | COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR (NLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32047-29 | COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR (NLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32051 | COMPONENT MAINTENANCE EQUIPMENT-SHOCK STRUT,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32051-1 | COMPONENT MAINTENANCE EQUIPMENT | 10 | |
| A32051-6 | Rmvl Equipment | 1 | |
| A32054-92 | RETAINER EQUIPMENT - MLG /NLG TORSION LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32056-1 | Stand Equipment -Main Landing Gear (Mlg) Buildup | 1 | |
| A32059-13 | Holding Equipment -Actuator. Main Landing Gear (Mlg) Door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32059-27 | HOLDING EQUIPMENT - ACTUATOR, MAIN LANDING GEAR (MLG) DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32061-1 | BACKLASH CHECK EQUIPMENT - NOSE LANDING GEAR (NLG) STEERING GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32066-1 | DRAIN EQUIPMENT - SHOCK STRUT, MAIN LANDING GEAR/N | 13 | |
| A32067-1 | PULLER EQUIPMENT - BUSHING, MLG BOGIE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32067-11 | Puller Equipment -Bushing. Main Landing Gear (Mlg) Bogie Beam | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32067-13 | PULLER EQUIPMENT - BUSHING, MAIN LANDING GEAR (MLG) BOGIE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32067-24 | PULLER EQUIPMENT - BUSHING, MLG BOGIE BEAM | 2 | |
| A32067-30 | PULLER EQUIPMENT - BUSHING, MAIN LANDING GEAR BOGIE BEAM | 1 | |
| A32067-31 | PULLER EQUIPMENT - BUSHING, MAIN LANDING GEAR (MLG) BOGIE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32067-32 | PULLER EQUIPMENT - BUSHING, MAIN LANDING GEAR (MLG) BOGIE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32075-1 | SPIN UP EQUIPMENT | 12 | |
| A32076-5 | CLAMP EQUIPMENT - PISTON ROD, MAIN LANDING GEAR TRUCK POSITIONER ASSEMBLY | 1 | |
| A32079-1 | BRAKE SLEEVE PULLER EQUIPMENT | 8 | |
| A32079-1-M | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32079-1-ML | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32090 | HOIST EQUIPMENT TAIL SKID SHOCK STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32090-14 | Hoist Equipment | 4 | |
| A32092 | GAGE EQUIPMENT RIGGING BRAKE QUADRANT MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32092-1 | GAGE EQUIPMENT, RIGGING, BRAKE QUADRANT, MLG | 6 | |
| A32096-70 | RIGGING EQUIPMENT | 11 | |
| A32096-86 | Rigging Equipment -Landing Gear. Air/Ground Sensors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32097-1 | PROTECTOR EQUIPMENT - EXTERNALLY THREADED AXLE, NOSE LANDING GEAR (NLG) | 22 | |
| A32098-1 | PROTECTOR EQUIPMENT - AXLE, MAIN LANDING GEAR (MLG) | 24 | |
| A32098-12 | PROTECTIVE EQUIPMENT - AXLE AND UNDERSIZED AXLE THREAD PROTECTO | 11 | |
| A32099 | SPRING EXTENDER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32099-1 | SPRING EXTENDER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32099-111 | SPRING EXTENDER EQUIPMENT | 3 | |
| A32099-112 | EXTENDER EQUIPMENT | 9 | |
| A32099-112 (T321107) | 767 Spring Extender Equipment | 1 | |
| A32099-38 | SPRING EXTENDER EQUIPMENT | 2 | |
| A32099-76 | SPRING EXTENDER EQUIPMENT | 7 | |
| A32099-78 | SPRING EXTENDER EQUIPMENT | 7 | |
| A32100-1 | Installation Equipment -Brake Sleeve. Main Landing Gear (Mlg) | 9 | |
| A32104-1 | PULLER EQUIPMENT - FUSE PIN, FORWARD TRUNNION, MAIN LANDING GEAR (MLG) | 1 | |
| A32105-1 | SLING EQUIPMENT – DRAG AND SIDE STRUT REMOVAL/INSTALLATION, MLG | 1 | |
| A32106-1 | SHOCK STRUT EQUIPMENT - COMPONENT MAINTENANCE, MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32107-1 | REPLACEMENT EQUIPMENT – LOWER BEARING SEALS, MLG | 3 | |
| A32108-1 | SLING EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 3 | |
| A32108-2 | SLING EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING G | 2 | |
| A32110-1 | Pin Puller Equipment -Brake Rod. Main Landing Gear | 1 | |
| A32111-1 | RIGGING TUBE EQUIPMENT - SIDE STRUT, MAIN LANDING GEAR (MLG) | 1 | |
| A32112-1 | REMOVAL/INSTALLATION GUIDE EQUIPMENT - AFT TRUNNION, MAIN LANDING GEAR (MLG) | 1 | |
| A32113-1 | PIN PULLER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32114-102 | Truck Position Retainer And Oleo Lock Equipment -Main Landing Gear (Mlg) | 2 | |
| A32114-64 | TRUCK POSITION RETAINER AND OLEO LOCK EQUIPMENT -MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32115-1 | OVERHEAD INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32115-2 | OVERHEAD INST'L / REM'L EQUIPMENT - MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32115-6 | Overhead Installation/Removal Equipment -Main Landing Gear (Mlg) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32115-82 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR (MLG) | 1 | |
| A32115-83 | Overhead Installation/Removal Equipment -Main Landing Gear (Mlg) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32116-1 | REMOVAL EQUIPMENT - MAIN LANDING GEAR BOGIE PIVOT PIN | 2 | |
| A32118-1 | FISHPOLE HOIST ATTACH BRACKET EQUIPMENT - MAIN LANDING GEAR (MLG) DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32121-1 | FIXTURE EQUIPMENT -LANDING GEAR ACTUATOR ASSEMBLIES | 2 | |
| A32122-1 | FIXTURE EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A330-92010-0001 | Pod & pylon assy R/I equipment | 1 | |
| A330-92026-0001 | Roll-Pitch, Spring actuator Jack, R/I Equipment | 1 | |
| A330-92485-0001 | R/I EQUIPMENT SAFEBOX | 1 | |
| A33003-19 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A33003-20 | TEST EQUIPMENT | 1 | |
| A33003-35 | TEST EQUIPMENT | 2 | |
| A33003-9 | TEST EQUIPMENT | 3 | |
| A34001-1 | WARNING EQUIPMENT - ATC, DME, VHF ANTENNA AND DRAIN MAST | 5 | |
| A34001-2 | WARNING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34001-4 | Equipment - Warning, ATC, VHF, and DME Antenna | 11 | |
| A34001-5 | WARNING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34001-8 | WARNING EQUIPMENT | 2 | |
| A34009-29 | TEST BOX - REAR MODULE AND CONTROL PANEL, VERY HIGH FREQUENCY OMNIRANGE/DISTANCE MEASURING EQUIPMENT (VOR/ DME) | 1 | |
| A34010-21 | TEST BOX - FRONT MODULE, VERY HIGH FREQUENCY OMNI RANGE/ DISTANCE MEASURING EQUIPMENT (VOR/DME) | 1 | |
| A34011-1 | Breakout Box Equipment -Arinc 600. Line Maintenance | 2 | |
| A34011-112 | Breakout Box Equipment -Arinc 600. Line Maintenance | 1 | |
| A34011-119 | Breakout Box Equipment -Arinc 600. Line Maintenance | 1 | |
| A34011-165 | Breakout Box Equipment -Arinc 600. Line Maintenance | 1 | |
| A34016 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENAN | 1 | |
| A34016-1 | Breakout Box Equipment - ARINC 600, Line Maintenance | 3 | |
| A34016-1-REVJ | BREAKOUT BOX EQUIPMENT -ARINC 600. LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-10 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-11 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-12 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-13 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-14 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-15 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-16 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-17 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-175 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-176 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-18 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-180 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-181 | Breakout Box Equipment - ARINC 600, Line Maintenance | 1 | |
| A34016-182 | BREAKOUT BOX EQUIPMENT | 1 | |
| A34016-183 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-184 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-185 | Breaout Box Equipment - ARINC 6000, Line Maint. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-186 | Breakout Box Equipment - ARINC 600, Line Maintenance | 1 | |
| A34016-187 | Breaout Box Equipment - ARINC 6000, Line Maint. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-188 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-189 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-19 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-2 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-20 | Breakout Box Equipment | 1 | |
| A34016-204 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-205 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-206 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-207 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-208 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-209 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-21 | BREAKOUT BOX EQUIPMENT | 1 | |
| A34016-216 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-217 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-218 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-219 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-22 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-220 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-221 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-222 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-223 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-224 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-225 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-226 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-227 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-23 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-237 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-238 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-239 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-24 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-240 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-245 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-246 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-247 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-248 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-249 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-25 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-250 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-256 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-257 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-258 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-259 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-26 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-264 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-265 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-266 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-267 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-268 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-269 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-27 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-270 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-271 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-278 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-279 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-28 | Breakout Box Equipment - ARINC 600, Line Maintenance | 2 | |
| A34016-29 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-3 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-30 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-31 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-32 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-33 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-34 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-35 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 5 | |
| A34016-36 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-38 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-4 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-40 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-41 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-42 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-43 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-44 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-46 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-47 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-48 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-49 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-5 | Breakout Box Equipment - ARINC 600, Line Maintenance | 1 | |
| A34016-50 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-51 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-52 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-53 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-54 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-55 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-56 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-57 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-58 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-59 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-6 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-60 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-61 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-62 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-63 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-64 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-65 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-67 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-68 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-69 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | 1 | |
| A34016-7 | Breakout Box Equipment - ARINC 600, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-70 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-71 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-72 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-73 | BREAKOUT BOX EQUIPMENT - ARINC 600, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-8 | BREAKOUT BOX EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-9 | Breakout Box Equipment - ARINC 600, Line Maintenance | 2 | |
| A34016-X | BREAKOUT BOX EQUIPMENT - ARINC 600 LINE MAINTENANC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A34016-XX | Breakout Box Equipment -Arinc 600. Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A35001 | PETRACTION EQUIPMENT-FIRING PIN,OXYGEN SYSTEM | 1 | |
| A35001-10 | Retraction Equipment Assy | 21 | |
| A35001-13 | Retraction Equipment -Firing Pin. Oxygen System | 7 | |
| A35004-1 | RETRACTION EQUIPMENT-FIRING PIN, OXYGEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36001-1 | Removal/Installation Equipment -Engine Precooler | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36001-24 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36001-44 | REMOVAL/INSTALLATION EQUIPMENT – ENGINE PRECOOLER | 8 | |
| A36001-44-MP | ENGINE EQUIPMENT-PRECOOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36001-45 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 5 | |
| A36001-45-MP | ENGINE EQUIPMENT-PRECOOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36001-51 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 2 | |
| A36004-15 | INSTALLATION EQUIPMENT - CF6-80C2B BALL JOINT | 5 | |
| A36004-20 | INSTALLATION EQUIPMENT | 6 | |
| A36004-20-M | INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36005-1 | HOLD OPEN EQUIPMENT - PRESSURE REGULATOR SHUT OFF VALVE | 3 | |
| A36005-15 | HOLD OPEN EQUIPMENT - PRSOV | 8 | |
| A36006-1 | DUMMY CHECK VALVE -INTERMEDIATE PRESSURE (IP) PNEUMATIC SYSTEM. DISPATCH EQUIPMENT | 2 | |
| A36007-1 | TEST EQUIPMENT - INTERMEDIATE PRESSURE (IP) DUMMY CHECK VALVE | 1 | |
| A36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36009-1 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36010-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36011-1 | Pressure Test Equipment -Duct Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36012-1 | Pressure Test Equipment -Duct Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36013-1 | Pressure Test Equipment -Duct Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36015-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36018-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36019-1 | Plug Equipment -Duct. Proof Pressure Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36020-1 | Plug Equipment -Ducts. Proof Pressure Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36022-1 | REMOVAL/INSTALLATION EQUIPMENT - RB211 PRECOOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A38001-16 | PLUG EQUIPMENT - VACUUM WASTE SYSTEM | 11 | |
| A38001-22 | Vacuum Test Equipment, Vacuum Waste System | 21 | |
| A38001-65 | VACUUM TEST EQUIPMENT - VACUUM WASTE SYSTEM | 5 | |
| A38001-68 | VACUUM TEST EQUIPMENT - VACUUM WASTE SYSTEM | 11 | |
| A38004-29 | CLEANER EQUIPMENT -0 WASTE TANK SENSORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A38007-9 | PLUG EQUIPMENT | 11 | |
| A38009-1 | CLEANER EQUIPMENT - WASTE TANK SENSORS | 2 | |
| A38011-1 | PLUG EQUIPMENT - DRAIN MAST, WASTE WATER | 2 | |
| A38011-2 | PLUG EQUIPMENT | 1 | |
| A38012 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 1 | |
| A38012-1 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 2 | |
| A38012-18 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 4 | |
| A38012-31 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 1 | |
| A38012-32 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 1 | |
| A38012-39 | Pump Equipment - Vacuum Lavatory System | 11 | |
| A38012-40 | Pump Equipment - Vacuum Lavatory System | 11 | |
| A38012-59 | CAM LEVER COUPLER FOR PUMP EQUIPMENT-VACUUM LAVA | 1 | |
| A38012-64 | MALE ADAPTOR FOR PUMP EQUIPMENT-VACUUM LAVATORY | 1 | |
| A38012-85 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | 6 | |
| A38012-86 | Pump Equipment -Vacuum Lavatory System | 3 | |
| A38013-40 | RECIRCULATION PUMP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A49001-78 | CRADLE - APU, HOIST EQUIPMENT - 757 & 767 | 8 | |
| A49001-83 | JACK EQUIPMENT, APU CRADLE | 4 | |
| A49001-84 | HOIST EQUIPMENT - APU CRADLE | 10 | |
| A49004-1 | SUPPORT EQUIPMENT - AUXILIAR POWER UNIT | 5 | |
| A49004-2 | SUPPORT EQUIPMENT - AUXILIARY POWER UNIT (APU) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A49004-24 | Support Equipment - APU | 3 | |
| A49006-26 | HOIST EQUIPMENT - APU BATTERY | 1 | |
| A51001-19 | LOCATING EQUIPMENT | 10 | |
| A51002-1 | ALIGNMENT EQUIPMENT | 5 | |
| A51002-2 | ALIGNMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A51006-26 | MEASUREMENT EQUIPMENT | 5 | |
| A51007-1 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52004 | SLING EQUIPMENT-DOOR HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52004-100 | EQUIPMENT-FITTING-SMALL CARGO DOOR | 2 | |
| A52004-101 | SLING EQUIPMENT - DOOR HANDLING | 3 | |
| A52004-41 | SLING EQUIPMENT – DOOR HANDLING | 5 | |
| A52004-42 | Sling Equipment -Door Handling | 6 | |
| A52004-43 | SLING EQUIPMENT - DOOR HANDLING | 12 | |
| A52004-44 | Sling equipment-door handling | 6 | |
| A52004-45 | SLING EQUIPMENT - DOOR HANDLING | 6 | |
| A52004-46 | SLING EQUIPMENT - DOOR HANDLING | 5 | |
| A52004-47 | SMALL CARGO DOOR FITTING EQUIPMENT | 4 | |
| A52004-83 | SLING EQUIPMENT - DOOR HANDLING | 1 | |
| A52004-95 | SLING EQUIPMENT – DOOR HANDLING | 3 | |
| A52006-1 | Replacement Equipment | 3 | |
| A52006-1-M | REPLACEMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52010-49 | CLAMP EQUIPMENT | 2 | |
| A52010-49-M | CLAMP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52010-50 | Clamp Equipment -Spring Installation/Removal. Bulk Cargo Door | 3 | |
| A52010-51 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 6 | |
| A52010-73 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| A52010-74 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| A52016-1 | RIGGING ADJUSTMENT EQUIPMENT FWD & AFT CARGO DOORS | 8 | |
| A52018-1 | TEST EQUIPMENT - LATCH LOCK, LARGE CARGO DOOR LATCH LOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52018-15 | TEST EQUIPMENT - LATCH LOCK, LARGE CARGO DOOR LATCH LOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52020-1 | MANDREL EQUIPMENT - BEARING INSTALLATION | 1 | |
| A52023-1 | BACKLASH CHECK EQUIPMENT - MANUAL DRIVE, LARGE CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52028-1 | Verification Equipment -Main Latch Fittings. Large Cargo Door | 5 | |
| A52030-1 | STAKING EQUIPMENT - GIRT BAR BEARING | 1 | |
| A52031-1 | RIGGING EQUIPMENT, MAIN DECK CARGO DOOR | 4 | |
| A52033-1 | VERIFICATION EQUIPMENT - MAIN LATCH FITTINGS, MAIN DECK CARGO DOOR | 2 | |
| A52034-1 | RIGGING EQUIPMENT - ROTARY ACTUATOR, MAIN DECK CARGO DOOR | 4 | |
| A52035-1 | DRIVER EQUIPMENT - INTERMEDIATE HINGE PINS, MAIN DECK CARGO DOOR | 3 | |
| A52035-1-M | DRIVER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A52036-1 | SLING EQUIPMENT - MAIN DECK CARGO DOOR | 5 | |
| A5210-50 | CLAMP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A5210-51 | CLAMP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A54001-165 | SLING EQUIPMENT - STRUT UNLOAD, PIN REMOVAL/INSTALLATION | 3 | |
| A54001-166 | SLING EQUIPMENT - STRUT UNLOAD, PIN REMOVAL/INSTALLATION | 3 | |
| A54001-167 | SLING EQUIPMENT, PRELOAD | 5 | |
| A54001-168 | SLING EQUIPMENT - STRUT UNLOAD, PIN REMOVAL/INSTALLATION | 9 | |
| A54001-196 | SLING EQUIPMENT - STRUT UNLOAD, PIN REMOVAL/INSTALLATION | 6 | |
| A54001-57 | SLING EQUIPMENT - STRUT UNLOAD, PIN REMOVAL/INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A54003-1 | SLING EQUIPMENT-STRUT REMOVAL AND INSTALLATION | 5 | |
| A54003-41 | SLING EQUIPMENT - STRUT REMOVAL AND INSTALLATION | 5 | |
| A54003-42 | Sling Equipment -Strut Removal And Installation | 12 | |
| A54003-51 | SLING EQUIPMENT - STRUT REMOVAL AND INSTALLATION | 4 | |
| A54003-51-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A54004-27 | PRELOAD EQUIPMENT - STRUT INSTALLATION | 8 | |
| A54008-1 | PULLER EQUIPMENT - FUSE PIN | 7 | |
| A54008-13 | PULLER EQUIPMENT | 5 | |
| A54008-13-M | PULLER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A54011-18 | REMOVAL/INSTALL EQUIPMENT | 6 | |
| A54012-1 | Sling Equipment -Strut. Rb211-524H | 2 | |
| A55001 | LOCK EQUIPMENT HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55001-19 | LOCK EQUIPMENT HORIZONTAL STABILISER | 3 | |
| A55001-2 | LOCK EQUIPMENT | 1 | |
| A55001-22 | LOCK EQUIPMENT-HORIZONTAL STABILIZER | 13 | |
| A55001-22-M | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55001-34 | LOCK EQUIPMENT HORIZONTAL STABILIZER | 3 | |
| A55001-35 | TEST EQUIPMENT | 1 | |
| A55001-42 | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55001-47 | LOCK EQUIPMENT HORIZONTAL STABILIZER | 9 | |
| A55003-1 | ALIGNMENT EQUIPMENT - HINGE, INBOARD ELEVATOR | 1 | |
| A55004 | JACKING EQUIPMENT-HINGE,HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55004-83 | JACKING EQUIPMENT | 1 | |
| A55004-95 | JACKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55004-96 | JACKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55004-98 | Jacking Equipment - Hinge, Horiz Stab | 7 | |
| A55004-98-M | JACKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55005-1 | REMOVAL EQUIPMENT - PIVOT BEARING, HORIZONTAL STABILIZER | 1 | |
| A55005-1-ML | REMOVAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55007-1 | REMOVAL / INSTALLATION EQUIPMENT - PIVOT BEARING, HORIZONTAL STABILIZER (LINE NUMBER 243 AND ON) | 6 | |
| A55007-1-I | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55007-1-M | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A55008-1 | TORQUE EQUIPMENT - VERTICAL FIN BOLTS | 4 | |
| A55009-1 | PLATFORM EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FI | 8 | |
| A5641BA | MODIFICATION OF MORGAN HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A57001 | JIG EQUIPMENT-REAMING,TRUNNION SUPPORT,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A57001-1 | JIG EQUIPMENT - REAMING, TRUNNION SUPPORT, MAIN LANDING GEAR (MLG) | 1 | |
| A57002-1 | Replacement Equipment -Outboard Trailing Edge Flap | 2 | |
| A57003-1 | LOCATING EQUIPMENT | 1 | |
| A57007-8 | LUBRICATING EQUIPMENT - LEADING EDGE SLAT AUXILIARY ARM ROLLER BOLT | 9 | |
| A57008-1 | REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR BOTTLE PIN | 3 | |
| A644491 | MEASURING EQUIPMENT | 1 | |
| A644491PM | MEASURING EQUIPMENT | 1 | |
| A664969 | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A685064 | MEASURING EQUIPMENT, SEMIFUID. | 3 | |
| A685064 | MEASURING-EQUIPMENT, SEMIFUID | 3 | |
| A7001-31 | EQUIPMENT-THRUST REVERSER HOLD OPEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71001-191 | Bootstrap Equipment -Pratt And Whitney Engines Jt9D-7R4D & Pw4056-4060 | 15 | |
| A71001-198 | BOOTSTRAP EQUIPMENT, P&W ENGINES | 5 | |
| A71001-331 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71002-50 | SLING EQUIPMENT, THRUST REVERESER | 5 | |
| A71002-56 | SLING EQUIPMENT–THRUST REVERSER | 6 | |
| A71003 | TORQUE EQUIPMENT-ENGINE MOUNTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71003-25 | TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D AND PW4000 ENGINES | 7 | |
| A71003-40 | TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D AND PW4000 ENGINES | 2 | |
| A71003-41 | TORQUE EQUIPMENT - ENGINE MOUNT (WITH VIBRATION ISOLATION MOUNT) | 7 | |
| A71003-52 | Torque Equipment | 9 | |
| A71003-53 | TORQUE EQUIPMENT - ENGINE MOUNT (WITHOUT VIBRATION ISOLATION MOUNT) | 8 | |
| A71003-54 | TORQUE EQUIPMENT - ENGINE MOUNTS, JT9D-7R4D AND PW4000 ENGINES | 5 | |
| A71005 | SLING EQUIPMENT - ENGINE INLET COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71005 REV E | SLING EQUIPMENT - ENGINE INLET COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71005-33 | SLING EQUIPMENT - ENGINE INLET COWL, PW2000 | 13 | |
| A71008 | SLING EQUIPMENT-P/W ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71008-1 | SLING EQUIPMENT - PRATT AND WHITNEY ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71008-106 | SLING EQUIPMENT - PRATT AND WHITNEY ENGINES | 1 | |
| A71008-107 | SLING EQUIPMENT - PRATT AND WHITNEY ENGINES | 1 | |
| A71008-108 | SLING EQUIPMENT - PRATT AND WHITNEY ENGINES | 2 | |
| A71008-64 | Sling equipment-P&W engines | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71008-65 | SLING EQUIPMENT | 5 | |
| A71008-66 | SLING EQUIPMENT-P&W ENGINES | 3 | |
| A71009-25 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71009-26 | SLINGEQUIPMENT | 6 | |
| A71011 | BOOTSTRAPEQUIPMENT-G.E.ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71011-131 | BOOTSTRAP EQUIPMENT | 1 | |
| A71011-242 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71011-243 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71011-256 | BOOTSTRAP EQUIPMENT G.E. ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71011-262 | BOOTSTRAP EQUIPMENT | 2 | |
| A71011-263 | BOOTSTRAP EQUIPMENT, GE ENGINES | 1 | |
| A71011-330 | BOOTSTRAP EQUIPMENT, GE ENGINES | 3 | |
| A71011-331 | BOOTSTRAP EQUIPMENT, GE ENGINES | 7 | |
| A71011-332 | BOOTSTRAP EQUIPMENT - GENERAL ELECTRIC ENGINE | 10 | |
| A71012-35 | PROOFLOAD EQUIPMENT - CRADLE, PRATT AND WHITNEY ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71016 | SLING EQUIPMENT-CORE COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71016-1 | SLING EQUIPMENT - CORE COWL | 9 | |
| A71016-23 | SLING EQUIPMENT | 1 | |
| A71017-1 | Sling Equipment -Core Cowl | 2 | |
| A71019-60 | ENGINE HANDLING EQUIPMENT - CF6-80A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71025-1 | SUPPORT PEDESTAL EQUIPMENT - CF6-80A ENGINE BUILDUP | 1 | |
| A71026-1 | HOLD OPEN EQUIPMENT - 40-KNOT, CF6-80A FAN COWL | 4 | |
| A71027-1 | Hold Open Equipment -Fan Cowl. 20 Knots. Cf6-80A Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71029-36 | HOLD OPEN EQUIPMENT - FAN COWL, 20 KNOT, JT9D-7R4 ENGINE | 1 | |
| A71030-32 | HOLD OPEN EQUIPMENT | 7 | |
| A71032-14 | HOLD-OPEN EQUIPMENT - 40 KNOTS, PRATT AND WHITNEY CORE COWLS | 9 | |
| A71033-19-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71033-31 | Hold Open Equipment -40-Knot. Cf6-80A Core Cowl | 4 | |
| A71035-1 | Cover Equipment -Bleed Valve. Ge Engine (Cf6-80A) | 6 | |
| A71035-13 | COVER EQUIPMENT - BLEED VALVE, GE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71035-27 | Cover Equipment -Bleed Valve. Ge Engine (Cf6-80C2B) | 9 | |
| A71037-1 | Test Equipment -Drying And Leak Check. Jt9D-7R4D Gearbox | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71044-1 | TRIM EQUIPMENT -0 PW ENGINES (CANCELED) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71044-7 | TRIM EQUIPMENT -0 PW ENGINES (CANCELED) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71047-150 | Bootstrap Equipment -Rr Rb211-524H | 3 | |
| A71054-1 | TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, RB211-524G/H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A77003-18 | TEST EQUIPMENT - INDICATING SYSTEM, EXHAUST GAS TEMPERATURE (EGT) | 1 | |
| A77003-34 | TEST EQUIPMENT EXHAUST GAS | 2 | |
| A77003-38 | TEST EQUIPMENT INDICATING SYSTEM, EXHAUST GAS TE | 6 | |
| A77004-19 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A77005-59 | TEST EQUIPMENT - ENGINE N1 AND N2 INTERFACE | 1 | |
| A77005-60 | TEST EQUIPMENT - ENGINE N1 AND N2 INTERFACE | 1 | |
| A77005-61 | EQUIPMENT - TEST, AVM SYSTEM N1 & N2 INTERFACE (FADEC ENGINES ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78001 | T/R HOLD-OPEN EQUIPMENT (SPL-6458) | 1 | |
| A78001-21 | HOLD OPEN EQUIPMENT - THRUST REVERSER, 40 KNOT | 1 | |
| A78001-22 | HOLD OPEN EQUIPMENT | 6 | |
| A78001-31 | EQUIPMENT - THRUST REVERSER HOLD-OPEN | 10 | |
| A78001-31-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78001-48 | HOLD OPEN EQUIPMENT - THRUST REVERSER, 40 KNOT | 8 | |
| A78001-48-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78001-48U | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78002-1 | THREAD PROTECTOR EQUIPMENT - THRUST REVERSER INSTALLATION AND REMOVAL | 8 | |
| A78002-1-M | THREAD PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78002-8 | THREAD PROTECTOR EQUIPMENT | 3 | |
| A78002-9 | THREAD PROTECTOR EQUIPMENT - THRUST REVERSER INST | 11 | |
| A78014-1 | Clamp Shell Equipment | 2 | |
| A78020-66 | HOIST EQUIPMENT - REMOVAL/INSTALLATION INA | 2 | |
| A78021-45 | Test/Overhaul Equipment -Cowl Door Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78021-46 | TEST OVERHAUL EQUIPMENT - COWL DOOR ACTUATOR | 1 | |
| A78023-1 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST RE | 2 | |
| A78023-121 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST REVERSER | 2 | |
| A78023-89 | REPAIR FIXTURE EQUIPMENT - PW4000 ENGINE THRUST REVERSER | 2 | |
| A78025-1 | BREAKOUT BOX EQUIPMENT | 1 | |
| A78025-100 | Breakout Box Equipment | 8 | |
| A78025-93 | Breakout Box Equipment -Test, Thrust Reverser | 10 | |
| A9004-24 | SUPPORT EQUIPMENT | 1 | |
| AB12001-YX2 | ALTERNATE BRAKE RESERVOIR FILLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB28001-R4Q | TEST EQUIPMENT JET PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB29001-P4N | PROTECTION EQUIPMENT - RAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB29001-S8L | TEST EQUIPMENT FOR RAM AIR TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB32001-Y4A | EQUIPMENT MLG, REM/INST WITH HOISTS, BOX 1 OF 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AB32001-Y4B | EQUIPMENT MLG, REM/INST WITH HOISTS, BOX 2 OF 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ABS-3214-30 | EMERGENCY BATTERY TEST EQUIPMENT | 4 | |
| AC100AWS | weigh equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AC21898180 | HYDRAULIC PRUEBA EQUIPMENT | 3 | |
| AC30-60 | AIRCRAFT WEIGHING EQUIPMENT PLATFORM | 2 | |
| AC68032 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACE-1520 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACE-488-350 | COM-1141 - EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACE-499-350 | COM-1141 - EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACP2788 | AMU ASSOCIATED EQUIPMENT | 1 | |
| ACS952 | PERSONAL PROTECTIVE EQUIPMENT & CLOTHING - PARTICULATE RESPIRATOR (NIOSH 42 CFR 84 CLASS N95, N99, N100) - (OR EQUIVALENT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AD-01711-201 | AOA EQUIPMENT REGULATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ADA235/295-945 | KIT PITOT/STATIC ACCESSORIES - SUPPORT EQUIPMENT AND TOOLS DATA | 3 | |
| ADAEH101-945 | PITOT TUBE BENCH EQUIPMENT P/N ADAEH101-945 FOR SH-101A HELICOPTERS | 2 | |
| ADAG24-946 | Pitot Static Test Equipment | 3 | |
| ADSE743 | AIR TEST EQUIPMENT | 3 | |
| AE89415Z | RAT GROUND CHECK EQUIPMENT | 2 | |
| AF7380001 | TOOL - EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-00340-401 | RUDDER BACK/LASH TEST EQUIPMENT | 2 | |
| AGE-04249-403 | BOX EQUIPMENT | 3 | |
| AGE-04251-401 | BOX EQUIPMENT | 2 | |
| AGE-EMB-GE-1 | DATA ACQUISITION GAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE00340-401 | RUDDER BACK/LASH TEST EQUIPMENT | 2 | |
| AGE106000 | RAM AIR TURBINE (RAT) TEST EQUIPMENT (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE10600D | RAT TEST EQUIPMENT | 3 | |
| AGE11960 | TORQUE EQUIPMENT- VERTICAL FIN, ULTRASONIC | 3 | |
| AGE17077 | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 1 | |
| AGE17077A | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 1 | |
| AGE17077B | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 4 | |
| AGE70036 | FIXTURE,TEST, ELECTRICAL-ELECTRONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AHV56-719 | MAINTENANCE EQUIPMENT FOR ASSEMBLY AND ADJUSTMENT OF S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AIBMD/COM1543 | OXYGEN LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AIM-EMB-GE-1 | GSE 268DATEA AQUISITION GAUGING EQUIPMENT | 1 | |
| AIT320013 | HOISTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AJW-114C | ENG COMPRESSOR WASHING EQUIPMENT | 1 | |
| ALT-8000 | RAMP TEST EQUIPMENT | 9 | |
| ALT29000001 | FILLING EQUIPMENT - HYDRALIC FLUID | 1 | |
| AM20906 | MANUAL INFLATION EQUIPMENT | 1 | |
| AMA4001 | SAFETY EQUIPMENT, OFF-WING ESCAPE SYSTEM (CONTROL TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AN60 - 6 | KIT WEIGHT AND BALANCE EQUIPMENT (0 -60000 LBS) | 1 | |
| AO125164 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AO125888 | test equipment | 1 | |
| AP6108-6-25 | FISHPOLE HOIST EQUIPMENT 737 | 3 | |
| ASI-152-1 | RADAR TEST EQUIPMENT | 2 | |
| ASTM D2583 | HARDNESS TEST EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ASTM E10 | HARDNESS TEST EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ASTM E140 | HARDNESS TEST EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATA30-20 | DE-ICING TEST EQUIPMENT ATR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATC-601 | 437_ATC601 (TEST EQUIPMENT) | 7 | |
| ATC1400A-2 | ATC TRANSPONDER AND DME EQUIPMENT. | 1 | |
| ATC600A | TRANSPONDER / DISTANCE MEASURING EQUIPMENT TEST SET | 22 | |
| ATI520JK | CABLE SWAGING EQUIPMENT | 5 | |
| ATS W4521W | INSULATION TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ATS-260 | ACOUSTICS - EQUIPMENT FOR TESTING | 11 | |
| ATS-WG01 | Aircraft / Avionic Equipment Vacuum Cleaner | 2 | |
| AZL02520-R00 | ROHMANN / GFORCE UTBT - ULTRASONIC INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B | SPRAYING EQUIPMENT (3.8 L SOLUTION TANK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B-14 | STAND AND PERSONNEL LIFTING EQUIPMENT - GENERAL PURPOSE | 5 | |
| B-9 | STAND AND PERSONNEL LIFTING EQUIPMENT - GENERAL PURPOSE | 1 | |
| B07003-15 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| B07008-1 | JACKING BAR EQUIPMENT-MAIN LANDING GEAR AXLE | 4 | |
| B07009-1 | Hoist Equipment -Airplane Recovery | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B0R0SC0PEKIT0LYMPU | BOROSCOPE EQUIPMENT RB211 | 1 | |
| B1 | EDDY CURRENT EQUIPMENT ELOTEST | 6 | |
| B19217AA | FCD66 MKII TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B1GS4A | SELECTOR SWITCH - ADT BOX / SELECTOR; MECHANIC; AIR INTAKE OPEN AND CLOSED SELECTOR AIR DISTRIBUTION BOX OF AIR DATA TEST EQUIPMENT SET; PLASTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B2 | ELOTEST, B1, SD OR SDM,EDDY CURRENT EQUIPMENT | 6 | |
| B20001-12 | ATTACH FITTING EQUIPMENT - WING/HORIZONTAL, STABILIZER SAFETY HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B20001-34 | Attach Fitting Equipment | 2 | |
| B20001-34 A5867 | ATTACH FITTING EQUIPMENT - UPGRADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B20001-34+A5867 | Attach Fitting Equipment - Upgrade | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B20004 | LEVERAGE ADAPTER EQUIPMENT - ACCESS PANEL | 1 | |
| B20004-21 | Leverage Adapter Equipment - Access Panel | 14 | |
| B20004-42 | Leverage Adapter Equipment | 11 | |
| B20005-41 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 4 | |
| B20005-52 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 3 | |
| B20005-68 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B20005-75 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 2 | |
| B20005-82 | TEST EQUIPMENT- VELOCITY/POSITION TRANSDUCER | 4 | |
| B2006-1 | TEST EQUIPMENT - DISCHARGE LINES CARGO FIRE EXTINGUISHER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B21004 | TEST EQUIPMENT -0 CABIN PRESSURE LEAK CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B21004-86 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B21004-91 | Wand Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B21005-1 | CLEANING WAND EQUIPMENT - HEAT EXCHANGER | 6 | |
| B21005-10 | CLEANING WAND EQUIPMENT - HEAT EXCHANGER | 10 | |
| B22001-1 | Jig Equipment -Auto Throttle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B22003-39 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | |
| B24001-119 | HOIST EQUIPMENT - MAIN BATTERY | 8 | |
| B24001-120 | HOIST EQUIPMENT - MAIN BATTERY | 8 | |
| B24001-121 | Hoist Equipment -Main Battery | 9 | |
| B24001-91 | HOIST EQUIPMENT - MAIN BATTERY | 6 | |
| B24001-93 | HOIST EQUIPMENT - MAIN BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B25001-2 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B25002 | FUNCTIONAL TEST EQUIPMENT -0 ADAPTER, OFF WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B25002-37 | TEST EQUIPMENT-ADAPT | 4 | |
| B26001-1 | Test Equipment -Engine And Apu Fire Detection System (Graviner) | 2 | |
| B26002-1 | Test Equipment - Discharge Line Cargo Fi | 25 | |
| B26002-13 | PRESSURE TEST EQUIPMENT | 1 | |
| B26002-4 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B26003 | TEST EQUIPMENT -0 ENGINE FIRE EXTINGUISHER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B26003-1 | FIRE EXTINGUISHER TEST EQUIPMENT RB211 | 3 | |
| B26003-2 | Test Equipment -Engine Fire Extinguisher (Pw2037) | 1 | |
| B26003-3 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHER | 3 | |
| B26004-1 | TEST EQUIPMENT | 2 | |
| B27001 | RIGGING EQUIPMENT-LEADING EDGE SLAT,INBOARD/OUTBOARD | 1 | |
| B27001-1 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 8 | |
| B27001-2 | RIGGING EQUIPMENT SLATS | 1 | |
| B27001-27 | RIGGING EQUIPMENT INBOARD / OUTBOARD | 6 | |
| B27001-33 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 4 | |
| B27001-40 | RIGGING EQUIPMENT - LEADING EDGE SLAT, INBOARD/OUTBOARD | 4 | |
| B27001-49 | Rigging Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27001-51 | RIGGING EQUIPMENT - LEADING EDGE SLAT | 8 | |
| B27001-79 | REMOVAL AND INSTALLATION EQUIPMENT HORIZONTAL STABILISER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27005 | SLING EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27005 REV B | SLING EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27005-35 | SLING EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27006 | EXISTING EQUIPMENT PDU L.E SLATS REMOVAL INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27006-1 | HOIST EQUIPMENT | 3 | |
| B27006-36 | Hoist Equipment- Spring Only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27006-56 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27006-65 | HOIST EQUIPMENT - POWER DRIVE UNIT (PDU), LEADING EDGE SLATS, REMOVAL/INSTALLATION | 2 | |
| B27006-79-757 | EQUIPMENT DUCT HOLD OPEN | 1 | |
| B27009 | LOCK OUT EQUIPMENT PCU ELEVATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27009-12 | LOCKOUT EQUIPMENT-PCUELEVATOR-757 | 20 | |
| B27011 | INTL/REM EQUIPMENT - HORIZ. STAB. JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27011 REV E | INTL/REM EQUIPMENT - HORIZ. STAB. JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27011-79 | INSTALLATION/REMOVAL EQUIPMENT - HORIZONTAL STABILIZER JACKSCREW | 18 | |
| B27012 | SLING EQUIPMENT I/R AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27012-1 | REMOVE/INSTALL SLING EQUIPMENT - AILERON | 5 | |
| B27013 | LOCK EQUIPMENT -0 RUDDER PCU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27013-14 | LOCK EQUIPMENT RUDDE | 7 | |
| B27013-14-M | RUDDER PCU LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27013-19 | LOCK EQUIPMENT - RUDDER POWER CONTROL UNIT | 8 | |
| B27013-19-M | RUDDER PCU LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27013-20 | LOCK OUT EQUIPMENT | 13 | |
| B27013-20-M | RUDDER PCU LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27014 | LOCK EQUIPMENT-OUTBD T.E. FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27014 REV B | LOCK EQUIPMENT - OUTBD T.E. FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27014-20 | LOCK EQUIPMENT - OUTBOARD TRAILING EDGE FLAP | 10 | |
| B27016 | LOCK EQUIPMENT-INBD T.E.FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27016 REV B | LOCK EQUIPMENT - INBD. T.E. FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27016-37 | LOCK EQUIPMENT - INBOARD TRAILING EDGE FLAP | 11 | |
| B27019 | SLING EQUIPMENT L.E. SLAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27019-10 | SLING EQUIPMENT - LEADING EDGE SLAT | 12 | |
| B27023 | RIGGING BLOCK EQUIPMENT ELEVATOR AFT QUADRANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27023-31 | RIGGING BLOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27023-47 | Rigging Block Equipment -Elevator Aft Quadrant | 7 | |
| B27025 | SLING EQUIPMENT - INBD/OUTBD AFT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27025 REV A | SLING EQUIPMENT - INBD/OUTBD AFT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27025-42 | SLING EQUIPMENT - INBOARD/OUTBOARD AFT FLAP | 4 | |
| B27025-42-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27028-1 | Test Equipment-Torque | 2 | |
| B27030-112 | RIGGING BAR EQUIPMENT | 1 | |
| B27030-125 | RIGGING BAR EQUIPMENT - INBOARD AND OUTBOARD FLAPS | 7 | |
| B27030-125-M | RIGGING BAR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27031-16 | Check Equipment | 3 | |
| B27034-1 | CHECKING EQUIPMENT - JACKSCREW BACKLASH, HORIZONTA | 11 | |
| B27035 | TEST EQUIPMENT -0 TE FLAP XMSN, AFT U-JOINT & | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27035-63 | Test Equipment | 1 | |
| B27036-1 | TEST EQUIPMENT - ANGLE GEARBOX, LEADING EDGE SLAT DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27037-1 | TEST EQUIPMENT | 1 | |
| B27038 | TEST & OVERHAUL EQUIPMENT -0 ANGLE TEE GEARBOX, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27038-1 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | 1 | |
| B27038-13 | Test And Overhaul Equipment -Angle Tee Gearbox. Trailing Edge Flap | 1 | |
| B27038-26 | TEST&OVERHAUL EQUIPMENT | 1 | |
| B27038-37 | TEST AND OVERHAUL EQUIPMENT - ANGLE TEE GEARBOX, TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27039-1 | RIGGING EQUIPMENT ELEVATOR | 1 | |
| B27039-13 | TRIM AND CALIBRATE EQUIPMENT FOR ELEVATOR AND STABILIZER | 4 | |
| B27039-2 | RIGGING EQUIPMENT | 5 | |
| B27039-28 | Rigging Equipment -Elevator And Stabilizer Trim Systems Control Installation | 9 | |
| B27039-3 | RIGGING EQUIPMENT | 5 | |
| B27042-1 | OVERHAUL AND TEST EQUIPMENT - OUTBOARD TEE GEARBOX, INBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27043 | JIG EQUIPMENT -0 ELEVATOR FEEL & CENTERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27043-1 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27045-12 | Shim Gauge Equipment | 2 | |
| B27052-66 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27052-70 | TEST EQUIPMENT - STABILIZER TRIM DRIVE MECHANISM | 1 | |
| B27061-1 | TEST EQUIPMENT | 6 | |
| B27064-1 | EQUIPMENT TORQUE RUDDER PEDAL ADJUST | 12 | |
| B27064-2 | TORQUE EQUIPMENT - RUDDER PEDAL TORQUE EQUIPMENT - RUDDER PEDAL | 6 | |
| B27064-5 | EQUIPMENT - ALIGNMENT, RUDDER PEDAL ADJUSTMENT | 2 | |
| B27065-1 | LOCK EQUIPMENT - CIRCUIT BREAKER (GDC10136) | 3 | |
| B27065-12 | LOCK EQUIPMENT - CIRCUIT BREAKER (GDC10136) | 8 | |
| B27066 | SLING EQUIPMENT - RUDDER | 1 | |
| B27066 REV A | SLING EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27066-1 | B757 RUDDER SLING EQUIPMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27066-36 | SLINGE EQUIPMENT RUDDER | 11 | |
| B27066-36-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27067-1 | Sling Equipment -Trailing Edge Flap Power Drive Unit Removal/Installation | 7 | |
| B27068-1 | TEST EQUIPMENT | 1 | |
| B27071-19 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27078-1 | SLING EQUIPMENT - TRAILING EDGE FLAPS | 5 | |
| B27078-36 | SLING EQUIPMENT - TRAILING EDGE FLAPS | 2 | |
| B27078-56 | SLING EQUIPMENT - TRAILING EDGE FLAPS | 5 | |
| B28005 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 1 | |
| B28005-1 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 5 | |
| B28005-1-M | PRESSURE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B28005-2 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 2 | |
| B28005-27 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 5 | |
| B28005-40 | PRESSURE PLUG EQUIPMENT FUEL SYSTEM | 3 | |
| B28005-41 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 3 | |
| B28005-42 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 6 | |
| B28005-70 | PRESSURE PLUG EQUIPMENT - FUEL SYSTEM | 2 | |
| B28008-1 | Pressurisation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B28008-10 | Pressurization Equipment -Wing Dry Bay. Fuel Leak Detection | 2 | |
| B28009-1 | Alignment Equipment -Fuel Shutoff Valve | 18 | |
| B28009-13 | Align Equipment | 2 | |
| B29001 | SCREEN EQUIPMENT RAM AIR TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B29001-23 | SCREEN EQUIPMENT - RAM AIR TURBINE | 14 | |
| B29001-42 | SCREEN EQUIPMENT RAM TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B29001-46 | Screen Equipment -Ram Air Turbine | 11 | |
| B29001-46-M | SCREEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B29003-8 | OVERHAUL EQUIPMENT - HYDRAULIC FILTER, PRESSURE AND RETURN MODULE | 1 | |
| B29005-17 | Yaw Damper Test Equipment | 7 | |
| B300 | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B30001 | TEST EQUIPMENT-WINDSHIELD RAIN REPELLENT SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B30001-7 | TEST EQUIPMENT WINDSHIELD RAIN SYSTEM | 14 | |
| B30001-8 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B300ECE | B300 EDDY CURRENT EQUIPMENT - ELOTEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32002-1 | EXTENDER EQUIPMENT | 10 | |
| B32005 | OVERHEAD INSTL/REMOVAL EQUIPMENT -0 NOSE LANDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32005-58 | REM/INST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32005-67 | Overhead Inst/Remove Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32005-68 | OVERHEAD INSTALLATION/REMOVAL EQUIPMENT - NOSE LANDING GEAR | 10 | |
| B32007 | SLING EQUIPMENT - RETRACT ACTUATOR, NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32007 REV NC | SLING EQUIPMENT - RETRACT ACTUATOR, NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32007-1 | SLING EQUIPMENT | 12 | |
| B32007-1-M | SLING EQUIPMENT, RETRACT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32010 | CHANGE EQUIPMENT -0 WHEEL & BRAKE, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32010-1 | CHANGE EQUIPMENT -WHEEL AND BRAKE MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32010-14 | WHEEL CHANGE EQUIPMENT | 23 | |
| B32010-15 | CHANGE EQUIPMENT - WHEEL AND BRAKE, MAIN LANDING GEAR (MLG) | 18 | |
| B32010-2 | CHANGE EQUIPMENT - WHEEL AND BRAKE, MAIN LANDING GEAR (MLG) | 1 | |
| B32010-28 | Change equipment-wheel & brake，MLG | 5 | |
| B32010-30 | CHANGE EQUIPMENT | 2 | |
| B32010-5 | CHANGE EQUIPMENT | 10 | |
| B32010-6 | CHANGE EQUIPMENT | 11 | |
| B32010-7 | CHANGE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32012 | LOCK EQUIPMENT DOOR ACTUATOR MLG | 1 | |
| B32012-32 | LOCK EQUIPMENT - DOOR ACTUATOR (MLG) 1 SET 2 PCS | 7 | |
| B32012-40 | Lock Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32012-45 | LOCK EQUIPMENT; DOOR ACTUATOR, MLG | 22 | |
| B32020-1 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 1 | |
| B32020-33 | INSTALL REMOVE EQUIPMENT MAIN LANDING GEAR | 5 | |
| B32020-40 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 3 | |
| B32020-45 | INSTALLATION/REMOVAL EQUIPMENT - MAIN LANDING GEAR | 10 | |
| B32024-84 | Puller Equipment -Lower Bearing Seal Retainer. Nose Landing Gear (Nlg) | 6 | |
| B32025-61 | Puller Equipment - NLG Bearing Seal Ret | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32025-75 | MLG LOWER BEARING SEAL RETAINER PULLER EQUIPMENT | 3 | |
| B32025-78 | Puller Equipment - MLG | 8 | |
| B32028 | LOCK EQUIPMENT -0 SHOCK STRUT, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32028-1 | LOCK EQUIPMENT - SHOCK STRUT, MAIN LANDING GEAR (MLG) | 10 | |
| B32028-1-M | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32028-21 | LOCK EQUIPMENT - SHOCK STRUT, MAIN LANDING GEAR (MLG) | 4 | |
| B32028-21-M | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32028-27 | ALIGNMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32029-1 | RIGGING EQUIPMENT | 6 | |
| B32030-1 | FIXTURE -LOCK ACTUATOR. OVERHAUL EQUIPMENT. NOSE LANDING GEAR (NLG) | 3 | |
| B32031-1 | TORQUING EQUIPMENT - RETRACT ACTUATOR, NOSE LANDING GEAR (NLG) | 1 | |
| B32032 | TEST EQUIPMENT -0 NOSE WHEEL STEERING DRUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32032-1 | TEST EQUIPMENT - NOSE WHEEL STEERING DRUM MECHANISM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32033 | WRENCH EQUIPMENT -0 ALTERNATE UPLOCK RELEASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32033-1 | Wrench Equipment | 2 | |
| B32034 | WRENCH EQUIPMENT -0 ALTERNATE UPLOCK RELEASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B32037 | TEST EQUIPMENT -0 UPLOCK ASSY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32037-1 | TEST EQUIPMENT - UPLOCK ASSEMBLY, MAIN LANDING GEAR(MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32040-1 | BUILD-UP EQUIPMENT - ACTUATOR, NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32040-35 | BUILD UP EQUIPMENT NOSE GEAR STEERING ACTUATOR | 1 | |
| B32040-36 | BUILD UP EQUIPMENT NOSE GEAR STEERING ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32040-37 | Build-Up Equipment -Actuator. Nose Gear Steering | 2 | |
| B32043-1 | HANDLING EQUIPMENT MLG DOOR | 8 | |
| B32044-12 | TOOL,PULLER EQUIPMENT | 9 | |
| B32048-1 | EQUIPMENT - SHOCK STRUT BUILDUP, MAIN LANDING GEAR (MLG) | 3 | |
| B32052-1 | Installation/Removal Equipment -Orifice. Nose Landing Gear (Nlg) Shock Strut | 4 | |
| B32055-1 | INSTALLATION EQUIPMENT - GLAND NUT, SHOCK STRUT, MAIN LANDING GEAR | 5 | |
| B32057-1 | OVERHAUL EQUIPMENT - RETRACT ACTUATOR ASSEMBLY, MAIN LANDING GEAR (MLG) | 1 | |
| B32058-27 | ALIGNMENT EQUIPMENT | 9 | |
| B32058-27-M | ALIGNMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32059-15 | Puller Equipment -Axle Sleeve. Main Landing Gear (Mlg) | 5 | |
| B32061-1 | SPRING COMPRESSION EQUIPMENT - NOSE WHEEL STEERING CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32062 | TORQUE EQUIPMENT -0 SEQ VALVE/BYPASS VALVE, NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B32062-1 | Torque Equipment -Sequence Valve/Bypass Valve Nose Landing Gear (Nlg) | 2 | |
| B32063-1 | Test Fixture Equipment -Autobrake Actuator | 2 | |
| B32066-1 | Roller Swaging And Removal Equipment -Bearing | 2 | |
| B32071-1 | HOIST ADAPTER EQUIPMENT | 3 | |
| B34002-1 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-10 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-11 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-12 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-122 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-123 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-13 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-14 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-15 | Breakout Box Equipment - ARINC 404 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-2 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-23 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-24 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-25 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-26 | Breakout Box Equipment - ARINC 404 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-27 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-28 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-29 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-3 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-30 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-31 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-32 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-33 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-35 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-38 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-39 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-4 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-40 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-41 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-42 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-44 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-45 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-46 | Breakout Box Equipment - ARINC 404 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-47 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-5 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-63 | BREAKOUT BOX EQUIPMENT - ARINC 404, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-66 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-80 | Breakout Box Equipment - ARINC 404 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-9 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-91 | Breakout Box Equipment - ARINC 404, Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B34002-XX | BREAKOUT EQUIPMENT - ARINC 404 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36002 | PLUG EQUIPMENT -0 AIR CONDITIONING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36002-1 | PLUG EQUIPMENT - AIR CONDITIONING SYSTEM | 4 | |
| B36003-1 | LEVERAGE EQUIPMENT - INSTALLATION/REMOVAL, PNEUMATIC DUCT, ENGINE STRUT | 10 | |
| B36003-1-M | LEVERAGE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36004-1 | PLUG EQUIPMENT - PRESSURE TEST, LOW PRESSURE DUCTS | 2 | |
| B36005-2 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36005-3 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36005-4 | Plug Equipment -Duct Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36005-4-M | PLUG EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B36007-1 | Removal/Installation Equipment -Precooler. Rb211-535 Engines | 3 | |
| B36008-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, PW2000 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B49002-64 | APU TRANSPORT EQUIPMENT | 12 | |
| B49004-1 | SUPPORT EQUIPMENT - AUXILIARY POWER UNIT APU | 11 | |
| B49004-1-M | SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B49004-9 | SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B52002-52 | SLING EQUIPMENT | 1 | |
| B52014-1 | REPLACEMENT EQUIPMENT - BULK CARGO DOOR | 3 | |
| B52014-1-M | REPLACEMENT EQUIPMENT, BULK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B52020-1 | ROTATION EQUIPMENT - MAIN CARGO DOOR LATCHES | 3 | |
| B52028-1 | CANOPY EQUIPMENT - NUMBER 2 LEFT HAND PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B54001-11 | HYDRAULIC PUMP EQUIPMENT C-DUCT | 4 | |
| B54002 | SLING EQUIPMENT -0 STRUT, RB211 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B54002-41 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B54002-52 | Sling Equipment -Strut. Rb211 Engine | 8 | |
| B54002－52 | Sling equipment-strut，RB211 engine | 8 | |
| B54004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | 5 | |
| B54004-14 | PRELOAD FIXTURE EQUIPMENT - STRUT | 1 | |
| B54009-19 | SLING EQUIPMENT -FUSE PIN. REMOVAL/INSTALLATION -RB211-535 ENGINE | 2 | |
| B54012-1 | Jig Equipment -Side Link. Strut | 2 | |
| B54013-38 | SLING EQUIPMENT - DIAGONAL BRACE UNLOAD, PW2000 SERIES ENGINE | 4 | |
| B54013-48 | SLING EQUIPMENT | 4 | |
| B54017-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B54017-18 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B54017-22 | SLING EQUIPMENT | 9 | |
| B54019-23 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 6 | |
| B54019-24 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT 115V | 6 | |
| B54019-40 | TOOL,ADAPTER EQUIPMENT STRUT UNLOAD | 5 | |
| B54019-41 | ADAPTER EQUIPMENT - STRUT UNLOAD | 5 | |
| B55001 | SLING EQUIPMENT -0 VERTICAL STAB. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B55001-31 | Sling Equipment -Vertical Stabilizer | 3 | |
| B55002 | SUPPORT EQUIPMENT - HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B55002 REV B | SUPPORT EQUIPMENT - HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B55002-1 | SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B55002-15 | SUPPORT EQUIPMENT | 11 | |
| B57001-1 | INSTALLATION/REMOVAL EQUIPMENT - TORQUE TUBE, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57001-23 | INSTALLATION/REMOVAL EQUIPMENT - TORQUE TUBE, INBOARD TRAILING EDGE FLAP | 5 | |
| B57001-23-M | RMVL/INSTL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57003-28 | ADAPTER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57003-29 | ADAPTER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | Adapter Equipment -Trunnion Bearing And Mount. Main Landing Gear (Mlg) Installation And Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B57006-1 | Removal/Installation Equipment -Flutter Weights | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B588 | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B600M | BONDTEST EQUIPMENT (INCLUDING BM-KIT-PC2, BM-KIT-MIA, BM-KIT-RES-C, BM-KIT-RES-A, NEC-6433, NDT702) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B67-43001-02 | BLADE FOLDING RACKS AND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71001 | ENGINE HANDLING EQUIPMENT -0 RB211-535 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71001-313 | ENGINE HANDLING EQUIPMENT - RB211-535 | 4 | |
| B71001-365-M | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71001-366 | BOOTSTRAP EQUIPMENT | 4 | |
| B71001-366-M | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71001-366U | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71001-371 | ENGINE HANDLING EQUIPMENT - RB211-535 | 4 | |
| B71001-372 | ENGINE HANDLING EQUIPMENT - RB211-535 | 11 | |
| B71003-1 | Nose Cowl - Sling Equipment RB211-535 | 1 | |
| B71006-79 | EQUIPMENT DUCT HOLD OPEN | 13 | |
| B71008 | PROOF LOAD FIXTURE ENGINE HANDLING EQUIPMENT,RB211-535 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71008-1 | PROOF LOAD EQUIPMENT - RB211-535 ENGINE | 1 | |
| B71013-1-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014 | HANDLING FRAME EQUIPMENT -0 C/DUCT RB211-535 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-130 | EQUIPMENT - FRAME, 'C' DUCT HANDLING - RB211-535 ENGINES | 2 | |
| B71014-131 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 2 | |
| B71014-132 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 8 | |
| B71014-133 | HANDLING FRAME EQUIPMENT- RB211-535 C DUCT | 4 | |
| B71014-150 | Handling Frame Equipment -C Duct Rb211-535 Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-151 | Handling Frame Equipment -C Duct Rb211-535 Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-152 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-155 | Handling Frame Equipment -C Duct Rb211-535 Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-3 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 3 | |
| B71014-5 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 3 | |
| B71014-6 | C DUCT HANDLING EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71014-98 | Handling Frame Equipment -C Duct Rb211-535 Engine | 2 | |
| B71019 | REFERENCE INFORMATION - RB211-535 ENGINE HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71020 | HOLD OPEN EQUIPMENT -0 THRUST REVERSER/CORE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71020-39 | HOLD OPEN EQUIPMENT - THRUST REVERSER/CORE COWL, PRATT AND WHITNEY ENGINE | 9 | |
| B71020-74 | HOLD OPEN EQUIPMENT - THRUST REVERSER/CORE COWL, P | 10 | |
| B71020-74-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71021 | PROOF LOAD FIXTURE ENGINE HANDLING EQUIPMENT PW 2057 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71021-1 | PROOF LOAD FIXTURE - ENGINE HANDLING EQUIPMENT, PW2000 SERIES | 3 | |
| B71022-172 | ENGINE HANDLING EQUIPMENT - PW2000 SERIES | 9 | |
| B71029-1 | HOIST EQUIPMENT - ΓÇ£CΓÇ¥ DUCT, RB211-535 | 13 | |
| B71034 | TEST EQUIPMENT-ENGINE PRESSURE MONITORING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71034-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71034-13 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 1 | |
| B71034-29 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 4 | |
| B71034-40 | EQUIPMENT - TEST, ENGINE PRESSURE MONITORING | 3 | |
| B71034-48 | TEST EQUIPMENT - ENGINE PRESSURE MONITORING | 2 | |
| B71034-63 | TEST EQUIPMENT -PRESSURE MONITORING, BOEING | 4 | |
| B71039 | REMOVAL EQUIPMENT -0 BARREL NUT, ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71039-9 | EQUIPMENT RR ENGINE | 4 | |
| B71040 | INLET COWL SLING EQUIPMENT | 5 | |
| B71040-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71040-20 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71040-21 | SLING EQUIPMENT | 1 | |
| B71040-23 | SLING EQUIPMENT | 1 | |
| B71040-36 | SLING EQUIPMENT - INLET COWL | 2 | |
| B71040-37 | SLING EQUIPMENT - INLET COWL | 2 | |
| B71040-38 | INLET COWL SLING EQUIPMENT | 7 | |
| B71040-39 | SLING EQUIPMENT - INLET COWL | 19 | |
| B71040-39-M | SLING EQUIPMENT INLET COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71040-66 | SLING EQUIPMENT - INLET COWL CE | 14 | |
| B71042 | HANDLING FRAME EQUIPMENT-C/DUCT RB211-535 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71042-154 | Handling Frame Equipment -C Duct Rb211-535 Engine | 13 | |
| B71043 | TEST EQUIPMENT -0 FUEL PUMP PRESSURE, PW2000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71043-1 | Test equipment-fuel pump pressure PW2000 series engines | 4 | |
| B71043-1-M | TEST EQUIPMENT, FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71043-1-ML | TEST EQUIPMENT, FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B71044 | ADAPTER EQUIPMENT-LOAD TEST,PRESSURE RELIEF DOOR LATCH | 1 | |
| B71044-10 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DO | 4 | |
| B71044-28 | ADAPTER EQUIPMENT-LOAD TEST, PRESSURE RELIEF DOOR LATCH | 12 | |
| B71044-28-M | ADAPTER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B72001 | BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B72001-1 | BALANCE EQUIPMENT - ENGINE TRIM | 2 | |
| B72001-19 | Balance Equipment -Engine Trim | 2 | |
| B76002-1 | RIGGING EQUIPMENT - PW2037 AUTOTHROTTLE RESOLVER | 1 | |
| B76002-11 | RIGGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B76003 | RIGGING EQUIPMENT-ENGINE CONTROL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B76003-1 | Rigging Equipment -Engine Control System | 7 | |
| B78004-1 | RIGGING EQUIPMENT | 3 | |
| B78007-41 | SUPPORT EQUIPMENT - FAN DUCT COWL AND THRUST REVERSER PW2000 SERIES ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B78007-43 | SUPPORT EQUIPMENT - FAN DUCT COWL AND THRUST REVERSER PW2000 SERIES ENGINES | 3 | |
| B78009 | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B78009-21 | Lock Equipment - Thrust Reverser Maintenance | 7 | |
| B78009-26 | Thrust/Reverse Maint Lock Equipment | 22 | |
| B78009-5 | T/R MAINT LOCK EQUIPMENT | 8 | |
| B78010-28 | STAND - FUNCTIONAL TEST EQUIPMENT, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 11 | |
| B78010-9 | STAND - FUNCTIONAL TEST EQUIPMENT, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 2 | |
| B78012-1 | TEST EQUIPMENT FAN D | 5 | |
| B78013-1 | OVERHAUL EQUIPMENT - THRUST REVERSER LOCKING ACTUA | 6 | |
| B78013-2 | OVERHAUL EQUIPMENT - THRUST REVERSER LOCKING ACTUATOR ASSEMBLY | 3 | |
| B78017-1 | Installation Equipment - Lead Screw Bearing, Thrust Reverser | 9 | |
| B78019 | VIBRATION ISOLATOR EQUIPMENT -0 T/R, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B78019-1 | VIBRATION ISOLATOR EQUIPMENT | 8 | |
| B7S009-26 | Lock Equipment T/Rev | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9 | STAND AND PERSONNEL LIFTING EQUIPMENT - GENERAL PURPOSE | 1 | |
| B9299077800000 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9299077800200 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9299077800400 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9299077800600 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9299077801200 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9299077801400 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B9STAND | STAND AND PERSONNEL LIFTING EQUIPMENT - GENERAL PURPOSE | 1 | |
| BA-96 | BEARING ANALYZER EQUIPMENT: | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BAEREF000025048 | Equipment - Eddy current crack detection | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BB5020SHM020 | ATEC 2 Avionics Automate Test Equipment / ATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BCREFD03906 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 1 | |
| BCREFD03952 | TORQUE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BCREFD90007 | DISPATCH EQUIPMENT | 1 | |
| BDT21-061 | UNLOADING EQUIPMENT SET (B737) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BELLING-TOOL | BELLING EQUIPMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BFEB01 | BFEB01 EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BFEB02 | BFEB02 EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BH 4016A1 | TEST - EQUIPMENT, RAT | 1 | |
| BH4016A | RAT TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BH4016A1 | TEST - EQUIPMENT, RAT | 1 | |
| BH405 | PROBE WARMING EQUIPMENT | 7 | |
| BHM-1016918 | CYCLEAN ENGINE WASH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BL52655 | ADJUSTING EQUIPMENT, SPOILER AND SPEEDBRAKE SERVO CNTR | 1 | |
| BLL-043 | CENTER TANK DRAIN EQUIPMENT (A320) | 1 | |
| BOE-501 | VENTILATION EQUIPMENT, FUEL TANK 737-300, -500 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BONDMASTER 600 | ULTRASONIC TESTING EQUIPMENT | 2 | |
| BORESCOPE | BORESCOPE EQUIPMENT FOR 737NG (CFM56-7) AND APU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BOROSCOPEKITOLYMPU | BOROSCOPE EQUIPMENT RB211 | 1 | |
| C07001-1 | Shock absorber equipment-nose landing gear | 4 | |
| C07008-1 | Restraint Equipment | 1 | |
| C07008-21 | RESTRAINT EQUIPMENT - OUTBOARD TRAILING EDGE FLAP TRACKS | 2 | |
| C07008-28 | Restraint Equipment - Inboard and Outboard Trailing Edge Flap Tracks | 5 | |
| C07009-1 | RESTRAINT EQUIPMENT - OUTBOARD TRAILING EDGE FLAP TRACKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C07012-1 | Sling Equipment - Aircraft Recovery (CE) | 1 | |
| C09002 | FIRE EXTINGUISHER SYSTEM TEST EQUIPMENT | 1 | |
| C10002-9 | EQUIPMENT MOORING NLG | 6 | |
| C10005-1 | PROTECTIVE COVER EQUIPMENT - ENGINE INLET, CFM LEAP - 1B | 5 | |
| C10006-1 | PLUG EQUIPMENT - ENGINE EXHAUST, LEAP-1B | 4 | |
| C10007-1 | PLUG EQUIPMENT - FAN REVERSER | 6 | |
| C10008 | MOORING EQUIPMENT FOR NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10008-1 | MOORING EQUIPMENT - NLG | 2 | |
| C10008-29 | Mooring Equipment | 4 | |
| C10011-1 | MOORING EQUIPMENT - KIT | 2 | |
| C10011-2 | MOORING EQUIPMENT - KIT | 1 | |
| C10011-31 | BOEING 777 MOORING EQUIPMENT KIT | 4 | |
| C10011-34 | MOORING EQUIPMENT - UNIVERSAL KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10012-1 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10012-2 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10012-3 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10013-1 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10013-2 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10013-3 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C10014-1 | WEIGHT EQUIPMENT - ENGINE DUMMY BALLAST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12002-7 | FUEL DRAIN EQUIPMENT | 22 | |
| C12006-1 | EQUIPMENT LOCK AILERON FULL-UP LUBRICATION | 4 | |
| C12006-14 | Lock Equipment | 6 | |
| C12006-15 | LOCK EQUIPMENT | 1 | |
| C12006-3 | AILERON FILL-UP LUBRICATION LOCK EQUIPMENT | 1 | |
| C21001 | EQUIPMENT COOLING SYSTEM PERFORMANCE TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21001-1 | EQUIPMENT COOL.SYS.TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21001-12 | EQUIPMENT COOL.SYS.TEST | 1 | |
| C21001-13 | EQUIPMENT COOLING SYSTEM TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21001-16 | Test Equipment | 1 | |
| C21001-19 | Test Set-Equipment Cooling System | 10 | |
| C21002-20 | REVERSE FLUSHER EQUIPMENT - REPLACED BY -24 | 9 | |
| C21002-24 | REVERSE FLUSHER EQUIPMENT - HEAT EXCHANGER | 16 | |
| C21003 | EQUIPMENT - BACKFLUSH, A/C PACK HEAT EXCHANGER | 4 | |
| C21003 -155 | EQUIPMENT BACKFLUSH, A/C PACK H/EXCHANGER | 7 | |
| C21003-13 | BACK-FLUSH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21003-133 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT E | 12 | |
| C21003-134 | BACKFLASH EQUIPMENT | 6 | |
| C21003-135 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT | 13 | |
| C21003-155 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT E | 7 | |
| C21003-156 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT EXCHANGER | 8 | |
| C21003-160 | EQUIPMENT - BACKFLUSH, A/C PACK HEAT EXCHANGER | 8 | |
| C21003-161 | EQUIPMENT - BACKFLUSH, A/C PACK HEAT EXCHANGER | 7 | |
| C21003-45 | BACKFLUSH EQUIPMENT | 3 | |
| C21003-53 | EQUIPMENT BACKFLUSH | 1 | |
| C21003-70 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT E | 1 | |
| C21003-71 | BACK FLUSH EQUIPMENT | 4 | |
| C21003-71 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT EXCHANGER | 4 | |
| C21003-72 | BACKFLUSH EQUIPMENT AIR CONDITIONING | 3 | |
| C21003-74 | BACKFLUSH EQUIPMENT AIR COND HEAT EX | 3 | |
| C21003-76 | Equipment-backflush A/C Pack Heat Exchanger | 2 | |
| C21003-80 | Backflush Equipment - Air Conditioning Pack Heat Exchanger | 6 | |
| C21003-81 | Backflush Equipment -Air Conditioning Pack Heat Exchanger | 5 | |
| C21003-82 | EQUIPMENT - BACKFLUSH, A/C PACK HEAT EXCHANGER | 4 | |
| C21003-82 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT E | 4 | |
| C21005-1 | HEAT EXCHANGER SUPPORT EQUIPMENT | 4 | |
| C21005-70 | HEAT EXCHANGER SUPPORT EQUIPMENT | 8 | |
| C21005-70 | HEAT EXCHANGER SUPPORT EQUIPMENT | 8 | |
| C21006-1 | EQUIPMENT - BACK FLUSH, A/C PACK HEAT EXCHANGE | 13 | |
| C21007-1 | DIAGNOSTIC EQUIPMENT - AIR CONDITIONING SYSTEM, MIXED MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21007-74 | DIAGNOSTIC EQUIPMENT - AIR CONDITIONING SYSTEM, MI | 2 | |
| C21010-1 | Cleaning Wand Equipment | 12 | |
| C21013-1 | TEST EQUIPMENT - STANDBY TEMPERATURE CONTROL VALVE (STCV) | 1 | |
| C21943 | EQUIPMENT INSTALLATI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C21943-0-1 | HOISTING EQUIPMENT-MLG ACTUATOR | 3 | |
| C22005-22 | Breakout Box Equipment | 11 | |
| C23002 | ACOUSTIC COUPLER EQUIPMENT - HANDSET TRANSMITTER AND RECEIVER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C23002-1 | Acoustic Coupler Equipment-Handset Transmitter and Receiver Assembly | 5 | |
| C24001-1 | Removal/Installation Equipment - Battery | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C24002-41 | IDG REM/INSTL EQUIPMENT | 7 | |
| C24002-70 | IDG REM/INSTL EQUIPMENT | 1 | |
| C24002-78 | IDG REM/INSTL EQUIPMENT | 15 | |
| C24003-1 | BATTERY INSTL. EQUIPMENT | 16 | |
| C24003-9 | EQUIPMENT - BATTERY INSTALLATION | 5 | |
| C24004-1 | Power Distribution Panel (Pdp)-Removal And Installation Equipment | 6 | |
| C24004-43 | Installation/Removal Equipment | 6 | |
| C24009-1 | HOIST EQUIPMENT - BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26001-20 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (BOEING 737-300) | 1 | |
| C26002-21 | Test Equipment -Engine/Auxiliary Power Unit Fire Detection System (Walter Kidde) | 17 | |
| C26002-25 | Test Equipment | 3 | |
| C26002-4 | Test Equipment | 3 | |
| C26004 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26004-101 | Test Equipment- Engine Fire | 6 | |
| C26004-27 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 1 | |
| C26004-28 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26004-32 | LEAK TEST EQUIPMENT | 10 | |
| C26004-33 | Test Equipment | 14 | |
| C26004-73 | TEST EQUIPMENT-ENGINE FIRE EXTINGUEISHING SYSTEM | 5 | |
| C26004-74 | TEST EQUIPMENT | 4 | |
| C26004-78 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 1 | |
| C26004-79 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 1 | |
| C26004-8 | TEST EQUIPMENT EXTINGUISHING SYSTEM | 11 | |
| C26004-83 | TEST EQUIPMENT - ENGINE FIREEXTINGUISHING SYSTEM | 10 | |
| C26004-84 | Test Equipment | 9 | |
| C26004-84 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 9 | |
| C26004.83 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 10 | |
| C26005-1 | EQUIPMENT TEST APU/ENGINE FIRE DET SYS | 13 | |
| C26006-29 | TEST EQUIPMENT FIRE EXT | 7 | |
| C26007 | TEST EQUIPMENT - COMPARTMENT OVERHEAT DETECTION CONTROL. M237 INLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26007-1 | Test Equipment - Compartment Overheat Detection (M237, In-Line) | 2 | |
| C26007-1-REVA | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26007-72 | Test Equipment - Compartment Overheat Detection (M237, In-Line) | 9 | |
| C26007-78 | TEST EQUIPMENT - COMPARTMENT OVERHEAT DE | 5 | |
| C26007-98 | TEST EQUIPMENT - COMPARTMENT OVERHEAT DETECTION MODULE | 3 | |
| C26008 | INSTL/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (LWR. CARGO COMPT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26008-1 | REMOVAL/INSTALLATION EQUIPMENT - CARGO FIREX BOTTLE (CE) | 4 | |
| C26008-148 | INSTL/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (LWR. CARGO COMPT) | 2 | |
| C26009 | Installation/Removal Equipment - Engine Fire Extinguisher Bottle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C26011-1 | ALIGNMENT EQUIPMENT | 9 | |
| C26011-1 | ALIGNMENT EQUIPMENT - FIRE SUPPRESSION BOTTLE NOZZLE | 9 | |
| C27001 | RIGGING EQUIPMENT-LEADING EDGE SLAT,INBOARD/OUTBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27001-16 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 6 | |
| C27001-51 | EQUIPMENT-TEST,FLAP SCREW BACKLASH | 14 | |
| C27003 | SLING EQUIPMENT-RUDDER REMOVAL/INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27003-31 | SLING EQUIPMENT - RUDDER REMOVAL/INSTALLATION | 5 | |
| C27003-31 / C27003-38 | SLING EQUIPMENT- RUDDER REMOVAL INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27003-38 | Sling equipment-rudder removal/instl | 9 | |
| C27003-38 | SLING EQUIPMENT - RUDDER REMOVAL and INSTALLATION | 9 | |
| C27005-1 | Assembly equipment-elevator feel & centering unit | 1 | |
| C27005-19 | Assembly equipment-elevator feel & centering unit | 3 | |
| C27006-12 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-22 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-42 | TEST EQUIPMENT - CUTOUT SWITCH, STABILIZER TRIM CONTROL | 1 | |
| C27006-47 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-48 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 2 | |
| C27006-95 | TEST EQUIPMENT - CUTOUT SWITCH, STABILIZER TRIM CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27007-46 | STEERING COLUMN CUT-OFF SWITCH TEST EQUIPMENT | 8 | |
| C27008-14 | CONTROL HANDLE LOCKOUT ASSY (C27008-14 ASSEMBLY INCLUDED IN C27008-20 AND -22 EQUIPMENT) | 4 | |
| C27008-20 | LOCK EQUIPMENT,FLAP ACTUATION CONT | 10 | |
| C27008-22 | LOCK EQUIPMENT - ACT | 16 | |
| C27008-42 | LOCK EQUIPMENT - ACTUATION CONTROL, FLAP | 1 | |
| C27011 | INSTL/REM EQUIPMENT-HORIZ. STAB,JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27011-79 | SUPPORT EQUIPMENTMENT HOTIZ STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27011-84 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27019-1 | L.E Slat Actuator Lock washer Tab Bending Equipment | 3 | |
| C27025-1 | Torque Wrench Equipment -Rudder Power Control Unit Attachment | 11 | |
| C27028-21 | Rigging Bar Equipment – Elevator Tab (B737) | 16 | |
| C27030 | TEST EQUIPMENT-FLAP SCREW BACKLASH | 2 | |
| C27030-107 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 3 | |
| C27030-1077 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 1 | |
| C27030-108 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 2 | |
| C27030-109 | TEST EQUIPMENT -FLAP SCRW BACK | 3 | |
| C27030-2 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 6 | |
| C27030-33 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 18 | |
| C27030-49 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 7 | |
| C27030-49 V.94 | Test equipment, flap screw backlash | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27030-94 | EQUIPMENT - CHECK, J | 17 | |
| C27030-94 | EQUIPMENT - TEST FLAP SCREW BACKLASH | 17 | |
| C27032-1 | MEASUREMENT EQUIPMENT - STABILIZER/ELEVATOR (SKI JUMP) | 11 | |
| C27034-1 | SLING EQUIPMENT - ELEVATOR REM | 18 | |
| C27034-31 | SLING EQUIPMENT - ELEVATOR REMOVAL/I | 6 | |
| C27035 | SLING EQUIPMENT RUDDER REMOVAL/INSTALLATION | 1 | |
| C27035-1 | Sling Equipment - Rudder | 1 | |
| C27035-20 | Sling Equipment | 17 | |
| C27035-20 | SLING EQUIPMENT - RUDDER REMOVAL and INSTALLATION | 17 | |
| C27037-1 | ASSEMBLY / DISASSEMBLY EQUIPMENT - FLIGHT SPOILER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27042-1 | TORQUE WRENCH EQUIPMENT | 14 | |
| C27042-1 | EQUIPMENT TORQUE WRENCH | 14 | |
| C27042-2 | WRENCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27043-1 | SEAL INSTALLATION EQUIPMENT - TRAILING EDGE FLAP DRIVE | 1 | |
| C27043-16 | Seal Installation Equipment -Trailing Edge Flap Drive | 3 | |
| C27043-16A | SEAL INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27043-16B | SEAL INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27045-1 | KIT - RIGGING EQUIPMENT, SLAT | 19 | |
| C27045-1 | RIGGING EQUIPMENT – SLAT | 19 | |
| C27049-1 | REMOVAL/INSTALLATION EQUIPMENT - RUDDER PCU | 5 | |
| C27049-36 | REMOVAL/INSTALLATION EQUIPMENT - RUDDER POWER CONTROL UNIT | 13 | |
| C27049-36 | EQUIPMENT REMOVAL INSTALLATION RUDDER PCU | 13 | |
| C27050 | HANDLING EQUIPMENT REMjINSTL STAB JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27050-1 | HANDLING EQUIPMENT | 1 | |
| C27050-125 | Handling Equipment - Removal/Installation, Stabilizer Jackscrew | 6 | |
| C27050-32 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, STABILIZER JACKSCREW | 7 | |
| C27050-36 | EQUIPMENT HANDLING R/I STABILIZER JACK SCREW | 1 | |
| C27050-82 | EQUIPMENT STABILIZER JACKS SCREW | 16 | |
| C27050-83 | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27052-1 | Sling Equipment - Trailing Edge | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27052-25 | T/E FLAPS REMOVAL EQUIPMENT | 15 | |
| C27052-32 | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27052-39 | SLING-EQUIPMENT,TRAILINGEDGEFLAPS | 12 | |
| C27052-39 | SLING EQUIPMENT – TRAILING EDGE FLAPS | 12 | |
| C27055-1 | SLING EQUIPMENT AILERON REM/INST | 13 | |
| C27056 | SLING EQUIPMENT - LEADING EDGE SLAT, REMOVAL AND INSTALLATION | 1 | |
| C27056- 35 | SLING EQUIPMENT | 9 | |
| C27056-19 | SLING EQUIPMENT | 9 | |
| C27056-35 | Sling Equipment - Leading Edge Slat, R/I | 9 | |
| C27058-1 | AXIAL LOAD EQUIPMENT - FLAP ACTUATION, TORQUE BRAK | 2 | |
| C27059-1 | Test Block Equipment-L.E. Flap and Slat Actuator | 3 | |
| C27060 | ADAPTER EQUIPMENT - CONTROL WHEEL | 1 | |
| C27060-1 | Adaptor Equipment-Control Wheel | 21 | |
| C27060-22 | EQUIPMENT - ADAPTER, CONTROL WHEEL | 5 | |
| C27065-1 | Check Equipment - Jackscrew Backlash, Horizontal Stabilizer (CE) | 4 | |
| C27065-20 | CHECK EQUIPMENT - JACKSCREW BACKLASH | 9 | |
| C27066-1 | LOCK EQUIPMENT - AILERON/ELEVATOR PCU INPUT ROD (POGO) | 24 | |
| C27066-1 | LOCK EQUIPMENT AILERON/ELEVATOR PCU | 24 | |
| C27067-81 | TEST EQUIPMENT - TORQUE LIMITER, TRANSMISSION, TRAILING EDGE FLAP | 1 | |
| C27067-82 | TEST EQUIPMENT - TORQUE LIMITER, TRANSMISSION, FLA | 1 | |
| C27067-83 | TEST EQUIPMENT -0 TORQUE LIMITER, TRANS, T.E. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27067-87 | Test Equipment -Torque Limiter. Transmission. Trailing Edge Flap | 2 | |
| C27067-88 | Test Equipment -Torque Limiter. Transmission. Trailing Edge Flap | 2 | |
| C27068-65 | TEST EQUIPMENT ADAPTER | 5 | |
| C27069-1 | RIGGING EQUIPMENT INTERLOCK VALVE | 3 | |
| C27069-12 | RIGGING EQUIPMENT | 10 | |
| C27069-20 | Rigging Equipment - Interlock Valve Cable Ground Spoiler | 10 | |
| C27069-20 | RIGGING EQUIPMENT - INTERLOCK VALVE CABLE. GROUND SPOILER | 10 | |
| C27071-1 | POSITIONING EQUIPMENT - ROD END, ACTUATOR | 3 | |
| C27072-1 | TEST EQUIPMENT - T.E. FLAP TRANSMISSION, AFT U JOI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27072-178 | Test Equipment - Trailing Edge Flap Transmission, Aft U-Joint and Ballscrew | 2 | |
| C27072-179 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, | 2 | |
| C27072-180 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT U-JOINT AND BALLSCREW (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27072-92 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27072-92U | TEST EQUIPMENT UPGRADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27072-93 | Test Equipment -Trailing Edge Flap Transmission. Aft U-Joint And Ballscrew | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27072-94 | TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION, AFT UJOINT AND BALLSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27073-1 | Test Equipment -Quadrant Assembly. Elevator Controls | 1 | |
| C27074-1 | OVERHAUL EQUIPMENT - SPRING STACK, TRAILING EDGE FLAP TRANSMISSION | 4 | |
| C27077-1 | TEST EQUIPMENT - QUADRANT ASSEMBLY, AILERON CONTROL | 2 | |
| C27079-1 | HOLD EQUIPMENT-T.E INBOARD FLAP | 6 | |
| C27082-1 | FIXTURE EQUIPMENT PUSH ROD LENGTH | 8 | |
| C27084 | TEST EQUIPMENT-OUTBD T.E.FLAP TRANSMISSION,NO-BACK BRAKE OPERATIONAL TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27084-1 | SPL-12536 TEST EQUIPMENT - OUTBOARD T.E. FLAP TRANSMISSION, NO-BACK BRAKE OPERATIONAL TEST | 13 | |
| C27084-1 | TEST EQUIPMENT OUT BOARD T. E TRANSMISSION | 13 | |
| C27084-1 | TEST EQUIPMENT OUTBOARD T.E FLAP TRANSMISSION NO BACK BRAKE OP TEST | 13 | |
| C27085-1 | REMOVAL/INSTALLATION EQUIPMENT - TAB MEC | 16 | |
| C27086-1 | Spring R/I equipment | 12 | |
| C27086-27 | Spring Removal / Installation Equipment | 6 | |
| C27087-1 | INSTALLATION EQUIPMENT - MAIN SLAT DOWNSTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27089-1 | AXIAL LOAD EQUIPMENT - TORQUE BRAKE ASSEMBLY, TRAILING EDGE FLAP | 1 | |
| C27104-1 | INSPECTION EQUIPMENT - SPEEDBRAKE MECHANISM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27104-14 | INSPECTION EQUIPMENT - SPEEDBRAKE MECHANISM | 2 | |
| C27105-1 | RIGGING EQUIPMENT - SPEED BRAKE CONTROL BRAKE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27205-1 | Torque Wrench Equipment - Rudder PCU Attachment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28004 | TEST EQUIPMENT-FUEL FEED LINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28004-1 | Test Equipment - Fuel Feed Line | 4 | |
| C28004-2 | TEST EQUIPMENT-FUEL FEED LINE | 1 | |
| C28006-11 | Leak Test Equipment -Rogerson Auxiliary Fuel Tanks | 1 | |
| C28007-1 | PLUG EQUIPMENT - ROGERSON AUXILIARY FUEL TANK BLADDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28008-1 | TEST EQUIPMENT - FUEL TANK AND VENT SYSTEM | 11 | |
| C28012-1 | TEST EQUIPMENT FLOAT SWITCH CONDUIT | 13 | |
| C28012-8 | FLOAT SWITCH CONDUIT TEST EQUIPMENT | 2 | |
| C28013 | Protective Equipment - Protective Ring for Wing Lo | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28013-1 | Protective Equipment -Protective Ring For Lower Wing Panel Access Door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28013-2 | Protective Equipment - Wing Panel Access Door | 3 | |
| C28013-3 | Protective Equipment, Protective Ring for Lower Wing Panel Access Door | 11 | |
| C28013-39 | PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR LOWER WING PANEL ACCESS DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C28013-4 | Protective Equipment - Wing Panel Access Door | 6 | |
| C28013-5 | Protective Equipment -Protective Ring For Lower Wing Panel Access Door | 2 | |
| C28013-6 | PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR LOWER WING PANEL ACCESS DOOR | 6 | |
| C28013-7 | Protective equipment-protective ring for lower wing panel access door | 3 | |
| C28013-8 | Protective Equipment -Protective Ring For Wing Lower Panel Access Doors | 7 | |
| C28014-1 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 12 | |
| C28051-30 | LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C29002-17 | Test Equipment - Rudder Power Control Un | 19 | |
| C29003-1 | SEAL INSTALLATION EQUIPMENT - HYDRAULIC SWIVEL ASSEMBLY | 8 | |
| C29003-8 | SEAL INSTALLATION EQUIPMENT - HYDRAULIC SWIVEL ASSEMBLY | 2 | |
| C29006-27 | ADAPTER EQUIPMENT- GROUND SERVICE CONNECTION, HYDRAULIC POWER | 6 | |
| C29008-1 | Seal Compression Equipment - Hydraulic Swivel Assembly | 8 | |
| C30001-1 | TEST EQUIPMENT | 1 | |
| C3006-1 | ENGINE BLEED AIR TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C320022-35 | MLG AXLE THREAD PROTECTOR EQUIPMENT-1/16 IN UNDERSIZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32003-1 | Removal Equipment, Min Landing Gear Trunion Link Pin | 7 | |
| C32003-16 | REMOVAL EQUIPMENT - TRUNNION LINK PIN, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32003-24 | Removal Equipment, Min Landing Gear Trunion Link Pin | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32004-35 | TEST EQUIPMENT PROXIMITY SYSTEM | 1 | |
| C32004-58 | TEST EQUIPMENT, PROXIMITY SENSOR | 7 | |
| C32009-1 | SWAGING EQUIPMENT-OS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32011-1 | Socket Equipment - Brake Disconnect Valve | 2 | |
| C32011-7 | SOCKET EQUIPMENT BRAKE DISC. VALVE | 19 | |
| C32012-1 | Removal/Inst Equipment | 4 | |
| C32012-12 | REMOVAL/INSTALLATION EQUIPMENT - WHEEL RETENTION NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR | 24 | |
| C32012-12 | EQUIPMENT - REMOVAL / INSTALLATION | 24 | |
| C32012-13 | EQUIPMENT, REMOVAL/I | 25 | |
| C32012-3 | EQUIPMENT - REMOVAL / INSTALLATION, WHEEL RETENTION NUT, MLG AND NLG | 13 | |
| C32012-8 | REMOVAL/INSTL EQUIPMENT - WHEEL RETENTION NUT, MLG AND NLG | 6 | |
| C32015-1 | Fuse Pin Puller Equipment | 14 | |
| C32015-18 | Puller Equipment | 8 | |
| C32015-22 | PULLER EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32015-34 | Fuse Pin Puller Equipment | 4 | |
| C32016 | REMOVAL/INSTALLATION EQUIPMENT - NOSE LANDING GEAR | 3 | |
| C32016-1 | Rem/Inst Equipment | 4 | |
| C32016-3 | REMOVAL/INSTALLATION EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 4 | |
| C32016-33 | RMVL/INSTL EQUIPMENT - NLG LOWER SEALS | 12 | |
| C32016-33 | RMV/INSTL EQUIPMENT - NLG LOWER SEALS | 12 | |
| C32016-46 | RMVL/INSTL EQUIPMENT - NLG LOWER SEALS | 14 | |
| C32016-46 | RMV/INSTL EQUIPMENT - NLG LOWER SEALS | 14 | |
| C32016-66 | REMOVAL/INSTALLATION EQUIPMENT - NLG LOWER SEALS | 6 | |
| C32017-1 | MLG OLEO SEAL REPLACE EQUIPMENT | 5 | |
| C32017-43 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 3 | |
| C32017-45 | RETAINER - SEAL, LOWER SEAL EQUIPMENT, MLG (C32017-45 PART OF KIT C32017-53) | 5 | |
| C32017-46 | RETAINER - PIN, LOWER SEAL EQUIPMENT, MLG (C32017-46 PART OF KIT C32017-53) | 3 | |
| C32017-47 | O-RING, LOWER SEAL EQUIPMENT, MLG (C32017-47 PART OF KIT C32017-53) | 2 | |
| C32017-52 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 5 | |
| C32017-53 | Replacement Equipment | 16 | |
| C32017-67 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 4 | |
| C32018-1 | EQUIPMENT PROTECTION GUIDE MLGX NLO | 10 | |
| C32021-18 | FORCE GAUGE EQUIPMEN | 1 | |
| C32022 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOS | 4 | |
| C32022 -20 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 32 | |
| C32022-15 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOS | 10 | |
| C32022-17 | Thread Protector Equipment -Main Landing Gear/Nose Landing Gear Axle | 19 | |
| C32022-18 | THREAD PROTECTION EQUIPMENT KIT | 19 | |
| C32022-2 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOS | 17 | |
| C32022-2 | THREAD PROTECTOR EQUIPMENT - NLG AXLE | 17 | |
| C32022-20 | Thread Protector Equipment - Main Landing Gear/Nose Landing Gear Axle | 32 | |
| C32022-21 | Thread protector equipment, NLG axle | 13 | |
| C32022-23 | THREAD PROTECTOR EQUIPMENT - MAIN LANDIN | 13 | |
| C32022-24 | THREAD PROTECTION EQUIPMENT KIT | 4 | |
| C32022-3 | THREAD PROTECTION EQUIPMENT KIT | 20 | |
| C32022-32 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 9 | |
| C32022-33 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/ NOSE LANDING GEAR AXLE | 4 | |
| C32022-35 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 11 | |
| C32022-35 | THREAD PROTECTOR EQUIPMENT | 11 | |
| C32022-38 | THREAD PROTECTOR EQUIPMENT MLG | 13 | |
| C32022-39 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 12 | |
| C32022-40 | THREAD PROTECTION EQUIPMENT KIT | 7 | |
| C32022-41 | THREAD PROTECTION EQUIPMENT KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32026 | Downlock Equipment - NLG and MLG * Flyaway Equipm | 1 | |
| C32026 | Downlock Equipment - NLG and MLG * Flyaway Equipment * | 1 | |
| C32026-1 | Downlock Equipment - NLG & MLG | 26 | |
| C32026-1 * | DOWNLOCK EQUIPMENT - NOSE LANDING GEAR AND MAIN LANDING GEAR | 26 | |
| C32026-12 | EQUIPMENT DOWNLOCK | 7 | |
| C32026-15 | DOWNLOCK, NLG AND MLG EQUIPMENT | 12 | |
| C32026-1S | EQUIPMENT - DOWNLOCK, NLG AND MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32026-2 | DOWNLOCK EQUIPMENT | 14 | |
| C32026-6 | EQUIPMENT - DOWNLOCK, NLG AND MLG (FLYAWAY KIT) | 13 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 3 | |
| C32028-1 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR | 4 | |
| C32028-109 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY | 9 | |
| C32028-110 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSE | 7 | |
| C32028-111 | Remvl/Instl Equipment | 9 | |
| C32028-121 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32028-2 | Rem/Inst Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32028-3 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR (CE) | 4 | |
| C32028-56 | Removal/Installation Equipment -Walking Beam Assembly. Main Landing Gear | 9 | |
| C32028-58 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSE | 6 | |
| C32028-59 | REMOVAL/INSTALLATION EQUIPMENT - WALKING BEAM ASSEMBLY, MAIN LANDING GEAR (CE) | 8 | |
| C32029-51 | EQUIPMENT - THREAD PROTECTOR | 5 | |
| C32030 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 1 | |
| C32030 -31 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 7 | |
| C32030-10 | RETENTION STRAP EQUIPMENT - INNER CYLINDER NOSE AND MAIN LANDING GEAR | 21 | |
| C32030-11 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 4 | |
| C32030-30 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32030-31 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 7 | |
| C32031 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 1 | |
| C32031-1 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN MAIN LANDING GEAR | 18 | |
| C32031-1 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AFT TRUNNION PIN | 18 | |
| C32031-22 | EQUIPMENT - REMOVAL / INSTALLATION, MLG AFT TRUNNION PIN | 10 | |
| C32031-22 | EQUIPMENT - REMOVAL/INSTALLATION | 10 | |
| C32032-125 | PULLER EQUIPMENT - AXLE/BRAKE SLEEVE, MAIN LANDING GEAR | 7 | |
| C32032-57 | Puller Equipment | 8 | |
| C32032-59 | PULLER EQUIPMENT - AXLE/BRAKE SLEEVE, MAIN LANDING GEAR | 5 | |
| C32032-98 | PULLER EQUIPMENT - AXLE/BRAKE SLEEVE, MAIN LANDING GEAR | 9 | |
| C32033-1 | R/I EQUIPMENT - TRUNNION PIN, NLG (ALIGNMENT PIN ASSY IS INCLUDED IN KIT) | 18 | |
| C32033-20 | R/I EQUIPMENT - TRUNNION PIN, NLG | 6 | |
| C32033-5 | R/I EQUIPMENT -TRUNNION PIN, NLG | 4 | |
| C32033-6 | R/I EQUIPMENT - TRUNNION PIN | 5 | |
| C32034 -339 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 10 | |
| C32034-204 | R/I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32034-211 | MLG REM/INSTAL EQUIPMENT | 4 | |
| C32034-227 | Removal/Installation Equipment -Main Landing Gear (Ce) | 11 | |
| C32034-273 | RMVL/INSTL EQUIPMENT, MAIN LANDING GEAR | 6 | |
| C32034-339 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 10 | |
| C32034-343 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 5 | |
| C32034-9 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 9 | |
| C32035-1 | Metering Pin and Retainer Ring Removal/Installation Equipment - Nose Landing Gear | 15 | |
| C32036-1 | Fixture Equipment - Actuator Assemblies, Nose Landing Gear | 2 | |
| C32036-101 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 1 | |
| C32036-45 | Fixture Equipment | 5 | |
| C32036-46 | FIXTURE EQUIPMENT - ACTUATOR ASSEMBLIES, NOSE LANDING GEAR | 4 | |
| C32036-92 | FIXTURE EQUIPMENT ACTUATOR ASSEMBLIES，NOSE LANDING GEAR | 5 | |
| C32037-211 | REMOVAL/INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32038-55 | Rod End Bearing Removal/Installation Equipment - Actuators Main Landing Gear (MLG) | 6 | |
| C32038-81 | C32038-81 EQUIPMENT | 2 | |
| C32041-40 | Buildup Equipment -Nose Landing Gear | 4 | |
| C32041-57 | Buildup Equipment - Nose Landing Gear | 9 | |
| C32041-67 | EXTENSION EQUIPMENT | 5 | |
| C32042-61 | Removal/Installation Equipment - Orifice Tube and Metering Pin, Main Landing Gear | 12 | |
| C32044-1 | CHECK EQUIPMENT - FREEPLAY, NLG | 9 | |
| C32044-41 | THREAD PROTECTION EQUIPMENT KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32046-1 | HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY | 8 | |
| C32046-25 | SPL-10835 HOLDING FIXTURE EQUIPMENT - SHIMMY DAMPER ASSEMBLY, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32049-1 | NLG RI OUTRIGGER EQUIPMENT | 14 | |
| C32051 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE | 1 | |
| C32051-1 | Test Equipment | 7 | |
| C32051-1 CANCELLED | Test Equipment Hyd Brake Syst | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32053-1 | Fixture Equipment - Side Strut Assembly, Main Landing Gear | 3 | |
| C32053-37 | FIXTURE EQUIPMENT | 5 | |
| C32053-41 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LAND | 5 | |
| C32053-50 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32054 | RMVL/INSTL EQUIPMENT - TRUNNION PIN. NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32054 | Rmvl/Instl Equipment - Trunnion Pin. NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32054-1 | RMVL/INSTL EQUIPMENT - TRUNNION PIN, | 5 | |
| C32056-1 | RIGGING EQUIPMENT - SHRINK LINK, MAIN LANDING GEAR | 2 | |
| C32058-1 | RIGGING EQUIPMENT - PIVOT CRANK TORQUE, MAIN LANDING GEAR | 2 | |
| C32059-1 | SERVICE EQUIPMENT –OIL AND GAS DRAIN AND FILL, MLG | 1 | |
| C32062-1 | ADAPTER EQUIPMENT - WRENCH, HOOK SPANNER | 2 | |
| C32064-1 | REPLACEMENT EQUIPMENT - MLG LWR BEARING SEALS | 2 | |
| C32065-1 | SERVICE EQUIPMENT - GAS FILL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32069-1 | LEVER COMPRESSION EXTENSION EQUIPMENT - MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32071-1 | MID BULKHEAD REMOVAL/INSTALLATION EQUIPMENT INNER CYLINDER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C32075-1 | INNER CHAMBER REMOVAL/INSTALLATION EQUIPMENT - INNER CYLINDER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C33001-58 | CABLING EQUIPMENT | 7 | |
| C34005-1 | TEST EQUIPMENT | 6 | |
| C34005-16 | TEST EQUIPMENT | 10 | |
| C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34011-1 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34011-11 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34011-21 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C35001-1 | Pressure Leak Test Equipment - Crew Oxygen System | 5 | |
| C35001-1 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | 5 | |
| C35001-27 | Pressure Leak Test Equipment -Crew Oxygen System | 4 | |
| C35001-37 | PRESSURE LEAK TEST EQUIPMENT - CREW OXYGEN SYSTEM | 6 | |
| C35001-37 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | 6 | |
| C35001-38 | PRESSURE LEAK TEST EQUIPMENT – CREW OXYGEN SYSTEM | 3 | |
| C35001-6 | Pressure Leak Test Equipment - Crew Oxygen System | 8 | |
| C35002-1 | EQUIPMENT - TEST, PRESSURE LEAK, PASSENGER OXYGEN SYSTEM | 3 | |
| C35002-14 | EQUIPMENT-TEST, PRESSURE LEAK, PASSENGER OXYGEN SYSTEM | 4 | |
| C35003-1 | EQUIPMENT - FIRING PIN RETRACTION, BE AEROSPACE AND AVOX OXYGEN GENERATORS | 5 | |
| C35003-10 | EQUIPMENT - FIRING PIN RETRACTION | 18 | |
| C35003-10-REVC | RETRACTION EQUIPMENT - FIRING PIN, OXYGEN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C35003-10 | RETRACTION EQUIPMENT - FIRING PIN, OXYGEN SYSTEM | 18 | |
| C35003-20 | Retraction Equipment - Firing Pin, Oxygen System | 9 | |
| C35004-1 | RETRACTION EQUIPMENT-FIRING PIN, OXYGEN | 9 | |
| C36001 | TEST EQUIPMENT-ENGINE BLEED AIR SYSTEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36001-1 | KIT, ENGINE BLEED EQUIPMENT | 4 | |
| C36001-111 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | 3 | |
| C36001-3 | MANOMETER FOR TEST EQUIPMENT | 2 | |
| C36001-4 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | 2 | |
| C36001-44 | EQUIPMENT TEST -ENGI | 10 | |
| C36001-45-F | MANOMETER FOR TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36001-51 | Test Equipment, Engine Bleed Air Systems | 3 | |
| C36001-61 | BLEED AIR SYSTEM TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36001-63 | Test Equipment - Engine Bleed Air | 10 | |
| C36001-63DECS | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36001-64 | TEST EQUIPMENT - ENGINE BLEED AIRSYSTEMS | 17 | |
| C36001-64 | TEST EQUIPMENT - ENGINE BLEED AIR SYSTEM | 17 | |
| C36001-73 | TEST EQUIPMENT (HOSE ASSY) (SPL-4350) | 2 | |
| C36001-FITTINGS | FITTING FOR ENGINE BLEED AIR SYSTEM TEST EQUIPMENT 737-300 THRU -500 & 757. | 1 | |
| C36002-1 | DISPATCH EQUIPMENT, SET | 12 | |
| C36003 | Equipment - Removal/Installation. LEAP-1B Engine Precooler - Engine Off | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36003-1 | PRECOOLER REMOVAL/INSTALLATION EQUIPMENT - CFM LEAP-1B ENGINE REMOVED | 3 | |
| C36003-23 | EQUIPMENT - REMOVAL/INSTALLATION, LEAP-1B ENGINE PRECOOLER - ENGINE OFF | 2 | |
| C36004 | EQUIPMENT - REMOVAL/INSTALLATION. LEAP-1B ENGINE PRECOOLER - ENGINE ON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C36004-1 | EQUIPMENT - REMOVAL/INSTALLATION | 2 | |
| C36006 | TEST EQUIPMENT - AIR SUPPLY CONTROL SYSTEM | 1 | |
| C36006-1 | TEST EQUIPMENT - AIR SUPPLY CONTROL | 7 | |
| C38002-1 | Plug Equipment -Skin Fitting. Door Sill Drain | 13 | |
| C44001 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 1 | |
| C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-49 | R/I EQUIPMENT -BROADBAND RADOME LIFT ASSY | 2 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT – LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 5 | |
| C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-58 / C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 2 | |
| C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 3 | |
| C47001-1 | TEST EQUIPMENT - NITROGEN ENRICHED AIR DISTRIBUTION SYSTEM NEGATIVE PRESSURE LEAK CHECK | 4 | |
| C47001-72 | TEST EQUIPMENT, NEADS NEGATIVE PRESSURE LEAK CHECK SPL-14094 | 7 | |
| C47002-1 | TEST EQUIPMENT - OXY | 1 | |
| C47002-30 | TEST EQUIPMENT - OXYGEN SENSOR | 6 | |
| C49003-1 | CRADLE, SUNDSTRAND AUXILIARY POWER UNIT (APU) - HOIST EQUIPMENT, CENTER OF GRAVITY (CG) COMPENSATING | 16 | |
| C49004 | SLING EQUIPMENT-APU | 1 | |
| C49004-25 | Sling Equipment APU | 4 | |
| C49004-36 | Sling Equipment - APU | 10 | |
| C49004-37 | Sling Equipment - APU | 10 | |
| C49004-38 | Sling Equipment - Auxiliary Power Unit (Apu) | 6 | |
| C49004-39 | Sling Equipment - Auxiliary Power Unit | 6 | |
| C49004-40 | SLING EQUIPMENT - AUXILIARY POWER UNIT | 18 | |
| C49004-41 | SLING EQUIPMENT - AUXILIARY POWER UNIT | 6 | |
| C49004-42 | SLINGEQUIPMENT-APU | 6 | |
| C49006-1 | THREAD PROTECTOR EQUIPMENT | 33 | |
| C49006-2 | THREAD PROTECTOR ACCESSORIES TO C49006-1 THREAD PROTECTOR EQUIPMENT - AUXILIARY POWER UNIT MOUNT BOLTS OEM: BOEING | 8 | |
| C49007-1 | APU HOIST EQUIPMENT - B737 NG | 14 | |
| C49007-20 | EQUIPMENT HOIST AUXILARY POWER UNIT | 4 | |
| C49007-20 | EQUIPMENT - HOIST, AUXILIARY POWER UNIT (AE131-9 APU) | 4 | |
| C49007-3 | HOIST EQUIPMENT KIT | 2 | |
| C49007-35 | APU CABLE HOIST EQUIPMENT | 9 | |
| C49007-36 | EQUIPMENT - HOIST, AUXILIARY POWER UNIT (AE131-9 APU) | 13 | |
| C49007-36 | APU HOIST EQUIPMENT | 13 | |
| C49007-42 | APU HOIST EQUIPMENT | 18 | |
| C49008-1 | Adaptor Equipment - APU Jacking | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C49008-37 | EQUIPMENT - ADAPTER, APU JACKING | 11 | |
| C49008-37 | ADAPTER EQUIPMENT – APU JACKING | 11 | |
| C49009-1 | AUXILIARY EQUIPMENT, SET | 14 | |
| C49010-50 | THREAD PROTECTOR EQUIPMENT - AUXILIARY POWER UNIT MOUNT BOLTS | 25 | |
| C49011-1 | Test Equipment | 9 | |
| C49012-1 | EQUIPMENT - APU EXHAUST REM/INST | 9 | |
| C49012-69 | INSTALLATION/REMOVAL EQUIPMENT - AUXILIARY POWER UNIT EXHAUST | 2 | |
| C51001 | JACK EQUIPMENT ENGINE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C51001-1 | JACK EQUIPMENT - ENGINE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C51001-2 | Jack Equipment - Engine Support | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C51003-1 | Measurement Equipment - Skin Smoothness Pitot Static Probes | 2 | |
| C51003-23 | Measurement Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C51003-28 | Measurement Equipment -Skin Smoothness. Pitot Static Probes | 4 | |
| C52001-1 | SPRING - LOADING CONTROL EQUIPMENT | 4 | |
| C52003-1 | Test Equipment - Backlash, Aft Airstairs Gearbox | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C52004-1 | Spring -Loading Control Equipment | 11 | |
| C52005-1 | FIXTURE EQUIPMENT - AUTOMATIC OVERWING EXIT SPRING | 4 | |
| C52006-74 | HYDRAULIC SYSTEM BLEEDER HOSE EQUIPMENT | 11 | |
| C52007-1 | Torque Wrench Adapter Equipment -Automatic Overwing Exit Hatch | 10 | |
| C52007-8 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC | 2 | |
| C52009-1 | Lifting Fixture Equipment - Main Deck Cargo Door | 4 | |
| C52009-2 | LIFTING FIXTURE EQUIPMENT - MAIN DECK CARGO DOOR | 3 | |
| C52010-1 | Support Equipment -Mid-Exit Door | 4 | |
| C52012 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | 1 | |
| C52012-15 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | 5 | |
| C52012-29 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | 12 | |
| C52012-59 | BARRIER, FRAME EQUIPMENT - PASSENGER ENTRY DOOR | 10 | |
| C52013-1 | TRANSPORTATION SLING EQUIPMENT - FORWARD AIRSTAIR | 6 | |
| C52013-31 | Transportation Sling Equipment - Forward Airstair (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C52013-41 | TRANSPORTATION SLING EQUIPMENT - FORWARD AIRSTAIR | 6 | |
| C52014 | REMOVAL AND INSTALLATION EQUIPMENT - FORWARD AIRSTAIR | 1 | |
| C52014-1 | REMOVAL AND INSTALLATION EQUIPMENT - FORWARD AIRSTAIR | 4 | |
| C52014-1 | REMOVAL AND INSTALLATION EQUIPMENT - FORWARD AIRS | 4 | |
| C52014-91 | REMOVAL AND INSTALLATION EQUIPMENT - FORWARD AIRS | 3 | |
| C52022-1 | LOCK EQUIPMENT | 2 | |
| C53002-1 | REMOVAL AND INSTALLATION EQUIPMENT - TAIL CONE | 6 | |
| C54001 | SLING EQUIPMENT-STRUT REMOVAL/INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C54001-37 | SLING EQUIPMENT - STRUT REMOVAL | 17 | |
| C54001-37 | SLING EQUIPMENT - STRUT REMOAVAL INSTALLATION | 17 | |
| C54002-1 | Alignment Equipment, Eccentric Bushing, Engine Strut Side Links | 6 | |
| C54004-1 | Sling Equipment - Cfm56-3 | 5 | |
| C54004-11 | SLING EQUIPMENT-CFM56-3 ENGINE | 8 | |
| C54005-1 | REMOVAL/INSTALLATION EQUIPMENT - FUSE PIN, NACELLE STRUT, CFM56-3 | 11 | |
| C54005-1-M | R/I FUSE PIN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C54008-28 | EQUIPMENT, REMOVAL/INSTALL | 5 | |
| C54008-54 | EQUIPMENT, REMOVAL/INSTALL | 7 | |
| C54009-27 | Rmvl/Inst Equipment-Fuse Pin | 10 | |
| C54010-26 | Sling Equipment - Fuse Pin Removal/Installation, CFM56-7 | 4 | |
| C54010-29 | SLING EQUIPMENT - FUSE PIN REMOVAL/INSTALLATION, CFM56-7 | 4 | |
| C54011-59 | Removal/Installation Equipment -Engine Strut. Cfm56-7 | 6 | |
| C54013-1 | ALIGNMENT EQUIPMENT - ECCENTRIC | 5 | |
| C54014-1 | BEARING REPLACEMENT EQUIPMENT - THRUST REVERSER HINGE | 6 | |
| C54016 | RMVL/INSTL EQUIPMENT - ENGINE STRUT, CFM LEAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C54016-1 | SLING EQUIPMENT - ENGINE STRUT REMOVAL/INSTALLATION, CFM LEAP-1B ENGINE (CE) | 3 | |
| C54017-1 | REMOVAL AND INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 2 | |
| C54017-90 | REMOVAL AND INSTALLATION EQUIPMENT – AFT STRUT FAIRING | 5 | |
| C54018-1 | ALIGNMENT EQUIPMENT - ECCENTRIC BUSHING, ENGINE STRUT SIDE LINK | 2 | |
| C54019 | SLING EQUIPMENT - FUSE PIN R/I. CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C54019-1 | SLING EQUIPMENT - FUSE PIN REMOVAL/INSTALLATION, CFM LEAP-1B ENGINE ON (CE) | 3 | |
| C54020-12 | INSTALLATION EQUIPMENT - STRUT FIRE SEAL | 1 | |
| C54020-9 | INSTALLATION EQUIPMENT - STRUT FIRE SEAL | 1 | |
| C54021-1 | Sling Equipment | 2 | |
| C55004-1 | Sling Equipment -Vertical Fin (Ce) | 11 | |
| C55004-26 | Sling Equipment | 3 | |
| C55005-1 | HORIZONTAL STABILIZER PIN REMOVAL EQUIPMENT | 8 | |
| C55005-11 | "PIN REMOVAL EQUIPMENT -HORIZONTAL | 13 | |
| C55005-19 | PIN REMOVAL EQUIPMENT – HORIZONTAL STABILIZER 737,-700 - 800 | 11 | |
| C55007 | SLING EQUIPMENT - HORIZONTAL STABILIZER REMOVAL/INSTALLATION | 2 | |
| C55007-1 | SPL-2035 SLING EQUIPMENT - HORIZONTAL STABILIZER | 18 | |
| C55007-1 | SLING EQUIPMENT HORIZONTAL STABILIZER REMOVAL/INSTALLATION | 18 | |
| C55007-1-29 | SLING EQUIPMENT-HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C55007-29 | SLING EQUIPMENT - HORIZONTAL STABILIZER. | 10 | |
| C55008-1 | Alignment Equipment | 7 | |
| C55008-18 | Alignment Equipment - Horizontal Stabilizer Installation | 5 | |
| C55009-1 | EQUIPMENT - ALIGNMENT PINS AND GUIDE, VERTICAL FIN INSTALLATION | 8 | |
| C55010-1 | Sling Equipment - Vertical Fin | 7 | |
| C55010-1 | SLING EQUIPMENT – VERTICAL FIN | 7 | |
| C55010-33 | SLING EQUIPMENT - VERTICAL FIN | 12 | |
| C55010-33 | SLING EQUIPMENT - VERTICAL FIN | 12 | |
| C55010-56 | Sling Equipment - Vertical Fin | 1 | |
| C55014-1 | SLING EQUIPMENT - HORIZONTAL STABILIZER REMOVAL/INSTALLATION | 7 | |
| C57001-1 | ROLLER SWAGING EQUIPMENT - HINGE BRACKET | 4 | |
| C57002 | SLING EQUIPMENT - REMOVAL/INSTALLATION, WINGLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C57002 | Sling Equipment - Removal/Installation. Winglet | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C57002-1 | SLING EQUIPMENT-WINGLET REM/INST | 6 | |
| C57002-15 | Sling Equipment - Removal/Installation, Winglet | 21 | |
| C57002-22 | SLING EQUIPMENT – REMOVAL /INSTALLATION, WINGLET | 5 | |
| C57002-66 | SLING EQUIPMENT - REMOVAL/INSTALLATI | 8 | |
| C57003 | TEST EQUIPMENT-WING DRY BAY VAPOR SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C57003-1 | TEST EQUIPMENT WING | 5 | |
| C57003-41 | Test equipment-wing dry bay vapor seal | 1 | |
| C57003-49 | TEST EQUIPMENT - WING DRY BAY VAPOR SEAL | 1 | |
| C57003-50 | TEST EQUIPMENT - WING DRY BAY VAPOR SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C57004-1 | REMOVAL EQUIPMENT | 1 | |
| C63001-63 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71002-247 | THRUST REVERSER & COWLING HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71002-81 | THRUST REVERSER COWLING HANDLING EQUIPMENT | 4 | |
| C71002-91 | "THRUST REVERSER COWLING HANDLING EQUIPMENT - CFM56-3 ENGINE | 8 | |
| C7100245 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71003-171 | BOOTSTRAP EQUIPMENT-CFM56-3 ENGINE | 1 | |
| C71003-218 | BOOTSTRAP EQUIPMENT - CFM56-3 ENGINE | 2 | |
| C71003-235 | BOOTSTRAP EQUIPMENT CFM56-3 | 2 | |
| C71003-245 | BOOTSTRAP EQUIPMENT | 5 | |
| C71003-246 | BOOTSTRAP EQUIPMENT | 4 | |
| C71003-247 | Bootstrap Equipment -Cfm56-3 Engine | 22 | |
| C71006-6 | THREAD PROTECTOR EQUIPMENT - CONE BOLTS, CFM56-3 ENGINE | 10 | |
| C71006-9 | THREAD PROTECTOR EQUIPMENT | 25 | |
| C71008 | SPECIFICATIONS -HANDLING EQUIPMENT. CFM56-3 ENGINE | 1 | |
| C71010-1 | Proof Load Equipment -Cfm56-3 Engine Cradle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71012 | Test Equipment, Engine Vibratin Isolation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71012-28 | TEST EQUIPMENT - ENGINE VIBRATION ISOLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71012-35 | TEST EQUIPMENT - ENGINE VIBRATION ISOLATION | 1 | |
| C71012-47 | Equipment, Test-Engine Vibration | 4 | |
| C71015-75 | Engine Sling Equipment | 2 | |
| C71015-79 | ENGINE SLING EQUIPMENT-OVERHEAD SHOP HANDLING | 4 | |
| C71015-80 | ENG SLING EQUIPMENT | 3 | |
| C71015-83 | ENGINE SLING EQUIPMENT - OVERHEAD SHOP HANDLING (CE) | 15 | |
| C71015-84 | ENGINE SLING EQUIPMENT | 2 | |
| C71016-1 | Repair Equipment - Inlet Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71020-105 | BOOTSTRAP EQUIPMENT - CFM56-7 ENGINE | 11 | |
| C71020-105-INC | Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71020-134 | BOOTSTRAP EQUIPMENT CFM56-7 | 4 | |
| C71020-135 | BOOTSTRAP EQUIPMENT CFM56-7 | 2 | |
| C71020-76 | Bootstrap Equipment CFM56-7 | 3 | |
| C71020-91 | Bootstrap Equipment - CFM56-7 Engine | 26 | |
| C71020-91-INC | Bootstrap Equipment - CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71020-91REV.E | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71020-91REV.E - 8/ | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71020-92 | EQUIPMENT BOOTSTRAP | 6 | |
| C71020-93 | EQUIPMENT BOOTSTRAP | 6 | |
| C71022-6 | TEST EQUIPMENT - WING DRY BAY VAPOR SEAL | 17 | |
| C71024-1 | Bootstrap Equipment - CFM56-7 Engine | 10 | |
| C71026-8 | Sling Equipment | 4 | |
| C71027-1 | INSTALLATION AND REMOVAL FRAME EQUIPMENT- INLET COWL CFM 56-7 ENGINE | 11 | |
| C71029 | BOOTSTRAP EQUIPMENT - LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71029 | Bootstrap Equipment - LEAP-1B Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71029-1 | BOOTSTRAP EQUIPMENT - CFM LEAP-1B ENGINE (CE) | 12 | |
| C71031-1 | SLING EQUIPMENT -FAN COWL, CFM LEAP-1B ENGINE | 7 | |
| C71033-1 | REMOVAL /INSTALLATION FRAME EQUIPMENT - INLET COWL, CFM LEAP-1B ENGINE (CE) | 8 | |
| C71036-1 | ENGINE MOUNT STABILIZATION EQUIPMENT | 8 | |
| C71038-1 | ALIGNMENT / THREAD PROTECTOR EQUIPMENT - THRUST LINK | 6 | |
| C71039 | ENGINE SLING EQUIPMENT - OVERHEAD SHOP HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71039 | Engine Sling Equipment - Overhead Shop Handling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71039-1 | ENGINE SLING EQUIPMENT - OVERHEAD SHOP HANDLING (CE) | 3 | |
| C71040 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C71040-1 | Torque Equipment - Engine Mount Bolt | 5 | |
| C71040-30 | TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, CFM LEAP-1B | 4 | |
| C71040-34 | TORQUE EQUIPMENT - ENGINE MOUNT | 7 | |
| C71040-5 | TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, CFM LEAP-1B | 1 | |
| C71044-28 | PRESSURE RELIEF DOOR LATCH LOAD TEST ADAPTER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C72052-39 | SLING - EQUIPMENT, TRAILING EDGE FLAPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C76002-14 | Control Stand Equipment (6ea/kit) | 2 | |
| C76002-20 | Control Stand Equipment | 4 | |
| C78001-14 | Hold Open Equipment | 4 | |
| C78001-4 | Hold Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78001-78 | DOLLY AND HYDRAULIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78004-1 | Lockpin Equipment - Thrust Reverser Actuation Module Lockout | 28 | |
| C78004-2 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | 26 | |
| C78005 | EQUIPMENT-HOLD OPEN,THRUST REVERSER COWL,CFM56-7 | 4 | |
| C78005-21 | Equipment-Hold Open,thrust reverser cowl,CFM56-7 | 15 | |
| C78009-1 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 2 | |
| C78009-19 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 5 | |
| C78009-33 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 5 | |
| C78009-38 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 5 | |
| C78009-39 | Equipment - Handling, Primary Exhaust Sleeve and Plug | 8 | |
| C78009-72 | EQUIPMENT - HANDLING, PRIMARY EXHAUST SLEEVE AND PLUG | 6 | |
| C78009-77 | Equipment - Handling, Primary Exhaust Sleeve and Plug | 1 | |
| C78009-88 | EQUIPMENT - HANDLING, PRIMARY | 8 | |
| C78009-98 | EQUIPMENT - HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78011-37 | Dolly and Hydraulic Equipment | 15 | |
| C78011-60 | Dolly And Hydraulic Equipment | 7 | |
| C78011-70 | Dolly and Hydraulic Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78011-78 | EQUIPMENT - HYDRAULIC SYSTEM, THRUST REVERSER DOLLY | 8 | |
| C78012-1 | HOLD OPEN EQUIPMENT - THRUST REVERSER | 4 | |
| C78012-14 | HOLD OPEN EQUIPMENT-THRUST REVERSER | 21 | |
| C78012-14-M | HOLD OPEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78012-3 | HOLD OPEN EQUIPMENT | 2 | |
| C78018-1 | SPL-2429 EQUIPMENT - SLING, THRUST REVERSER, CFM56-7 ENGINE | 3 | |
| C78018-47 | EQUIPMENT - SLING, THRUST REVERSER, CFM56-8 | 6 | |
| C78018-50 | EQUIPMENT - SLING, THRUST REVERSER | 22 | |
| C78019-1 | THRUST REVERSER HOLD OPEN EQUIPMENT | 3 | |
| C78019-15 | HOLD OPEN EQUIPMENT - THRUST REVERSER COWL, CFM56-7 ENGINE | 25 | |
| C78020-14 | SLING EQUIPMENT - THRUST REVERSER CFM56-7 | 23 | |
| C78021-1 | 65* Hold Open Equipment | 12 | |
| C78021-1 | EQUIPMENT – HOLD OPEN , THRUST REVERSER COWL , 65 DEGREE | 12 | |
| C78022-1 | SLING EQUIPMENT | 9 | |
| C78022-35 | SLING EQUIPMENT - THRUST REVERSER SLEEVE | 7 | |
| C78023-13 | Hold Open Equipment - Thrust Reverser Cowl CFM56-7 Engine | 5 | |
| C78025-21 | ACTUATOREQUIPMENT | 20 | |
| C78028-1 | EQUIPMENT - ALIGNMENT, UPPER AUXILIARY T/R TRANSLATING SLEEVE | 4 | |
| C78029-1 | REPAIR FIXTURE EQUIPMENT - THRUST REVERSER, CFM56-3 | 2 | |
| C78029-2 | REPAIR FIXTURE EQUIPMENT - THRUST REVERSER, CFM56-3 | 2 | |
| C78029-3 | REPAIR FIXTURE EQUIPMENT - THRUST REVERSER, CFM56-3 | 2 | |
| C78031-1 | SLING EQUIPMENT – THRUST REVERSER OPENING, CFM LEAP-1B ENGINE (CE) | 7 | |
| C78032-1 | Sling Equipment - T/R | 7 | |
| C78033 | EQUIPMENT - HOLD OPEN. THRUST REVERSER COWL. LEAP-1B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78033 | Equipment - Hold Open. Thrust Reverser Cowl. LEAP-1B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78033-1 | Hold Open Equipment | 7 | |
| C78033-1 | EQUIPMENT - HOLD OPEN, THRUST REVERSER C | 7 | |
| C78033-40 | Equipment - Hold Open, Thrust Reverser Cowl, LEAP | 10 | |
| C78034 | SLING EQUIPMENT - THRUST REVERSER SLEEVE, LEAP-1B ENGINE | 2 | |
| C78034 | Sling Equipment - Thrust Reverser Sleeve. LEAP-1B Engine | 2 | |
| C78034-1 | HOIST EQUIPMENT - THRUST REVERSER SLEEVE, CFM LEAP-1B ENGINE (CE) | 8 | |
| C78035-1 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS | 11 | |
| C78035-14 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE (CE) | 9 | |
| C78035-2 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | 3 | |
| C78035-3 | LOCK EQUIPMENT - THRUST REVERSER OPENING ACTUATORS, CFM LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C78044-1 | EQUIPMENT - CUTTING, FIRE SEAL | 3 | |
| C79001-1 | Test Equipment - Engine Fuel/Oil, Pressure Switch | 12 | |
| CAB50 | EQUIPMENT - RESPIRATORY PROTECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAN-50 | VENTILATION EQUIPMENT - FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAPFAD48ATST29Z002 | PROTECTION EQUIPMENT - RAT (RAT SAFETY CAGE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5944-12 | AXLE NUT SOCKET EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5944-13 | AXLE NUT SOCKET EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CC0M-1523 | BARRIER, FRAME EQUIPMENT PASSENGER ENTRY DOOR | 1 | |
| CF6-80C2 TEST CELL EQUIPMENT | SHOP SET OF ENGINE TEST CELL EQUIPMENT | 1 | |
| CG9000031-0001 | Aft Equipment Bay Platform - Interior | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CG9000088-0001 | AFT EQUIPMENT BAY PLATFORM - INTERIOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CH1056-084 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CH1057-064-1 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CH1057-078 | TORSION BAR UNLOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CH712-238 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1056-084 | BACKFLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1056-084-1 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1056-084-2 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1056-089 | BACKFLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1057-064 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA1057-078-1 | TORSION BAR UNLOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA698-133 | TORSION BAR UNLOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA700-079 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA700-224 | EQUIPMENT BACK LASH | 6 | |
| CHA710-082 | EQUIPMENT-BACKLASH CHECKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA712-176-2 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA712-176-3 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA712-23B | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA720-050 | BACKLASH CHECKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHA723-326 | MICRO SWITCH SETTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHADWICK VXP | BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CHADWICK VXP O 8500 | BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CMA16 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CMA300 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COM-1523 | BARRIER,FRAME EQUIPMENT PASSENGER ENTRY DOOR | 1 | |
| COM-1535 | EQUIPMENT - SAMPLING, FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30119 | ADAPTOR, GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP30197-1 | LIFTING EQUIPMENT -REMOVAL OF WHEELCASE - ENGINE ON WING | 1 | |
| CP30197/1 | LIFTING EQUIPMENT | 1 | |
| CP30263 | LIFTING EQUIPMENT | 1 | |
| CP30764/1 | EQUIPMENT - HANDLING, FUEL PUMP AND METERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CPW-100 | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| CPW-100-1 | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| CPW-100-2 | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| CRLE-01 | Crew Rest Lifting Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CS-235-RC106 | LH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-235-RC116 | BALANCE EQUIPMENT FOR AILERON ELEVATOR AND RUDDER | 1 | |
| CS-235-RC117 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-235-RC150 | RUDDER TRIM TAB PROTRACTOR - SUPPORT EQUIPMENT AND | 1 | |
| CS-295-A-6118 | MLG/NLG SHOCK ABSORBER MAINTENANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CS-295-AG118 | MLG/NLG SHOCK ABSORBER MAINTENANCE EQUIPMENT | 1 | |
| CS-295-AG131 | DEICING TEST EQUIPMENT | 1 | |
| CS-295-AG131-B | DEICING TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CS-295-AG131-X | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295-AG135 | DAMPER MAINTENANCE EQUIPMENT | 1 | |
| CS-295-AG142 | MLG/NLG SHOCK ABSORBER MAINTENANCE EQUIPMENT CN-235 & C-295 | 1 | |
| CS-295-AG142-X | MLG-NLG SHOCK ABSORBER MAINTENANCE EQUIPMENT | 1 | |
| CS-295-RC114 | COMPRESSOR KIT, ICE PROTECTION AND AIR CONDITIONING SYSTEM - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295-RC146 | RUDDER ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295-RC163 | LH ELEVATOR ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-295AG131 | DEICING TEST EQUIPMENT | 1 | |
| CS-710-509 | HV TEST TOOL FOR OCM WATER EQUIPMENT | 1 | |
| CS12100 | CONSPACE COMMUNICATIONS EQUIPMENT | 1 | |
| CS295-AG131 | DE-ICING TEST EQUIPMENT | 1 | |
| CS710-509 | HV TEST TOOL FOR OCM WATER EQUIPMENT | 1 | |
| CSI1000 | EQUIPMENT COMMUNICATION CONFND SPACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CSPB10-100K30P5 | CSP COMPRESSION CANISTER, STAINLESS STEEL (PART OF THE AIRCRAFT WEIGHTING EQUIPMENT ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CST-2987 | Hand handle equipment | 3 | |
| CTS-700 | COM-1613 TRANSMITTER TESTER-SELCAL.GROUND EQUIPMENT | 8 | |
| CTS405R1A | Test equipment - yellow hyd syst | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D-2060 | MAGNETIC PARTICLE EQUIPMENT | 2 | |
| D2-069 | COUNDUCTIVITY TEST EQUIPMENT (SIGMATEST) | 1 | |
| D46217 | INSERTION AND ALIGMENT EQUIPMENT | 6 | |
| D4907003500051 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D51433-7 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D51620-ELSS-04 | MPFR GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D634T50 | GAGE EQUIPMENT-HYDRAULIC BRAKE SYSTEM PR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D97B00-003 | Ground support equipment | 16 | |
| DAI-7500-02-00-ST | PRESSURE TEST EQUIPMENT 4PCI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT 70-0013 | PROPELLER ASSEMBLY LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT65 | PROPELLER LIFTING EQUIPMENT | 1 | |
| DAPT70 | LIFTING EQUIPMENT PROP | 1 | |
| DAPT70-0009 | PROP LIFTING EQUIPMENT Q400 | 3 | |
| DAPT70-0009-IAS | PROP LIFTING EQUIPMENT Q400 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT70-0020 | PROPELLER LIFTING EQUIPMENT (VERTICAL) | 2 | |
| DAPT70-0021 | LIFTING EQUIPMENT | 1 | |
| DAPT70-0021-00 | Q400 LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT70-0021-00-IAS | LIFTING EQUIPMENT | 1 | |
| DAPT70-0021-IAS | PROP LIFTING EQUIPMENT VERT/HORZ DAPT70-0038 is two interchangeable with P/N DAPT70-0021. | 1 | |
| DAPT70-0038 | EQUIPMENT LIFTING | 5 | |
| DAPT70-0038-00 | EQUIPMENT, LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT70-0038-IAS | LIFTING EQUIPMENT | 1 | |
| DAPT700-0021-00 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT70−0021−00 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DC-10-22-11-01 | LVDT EQUALIZATION TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DC-600 | VENT VALVE TEST EQUIPMENT | 3 | |
| DC-700 | TEMP. SENSOR TEST EQUIPMENT | 2 | |
| DC10-22-11-01 | LVDT EQUALIZATION TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DC400A | FUEL QUANTITY TEST EQUIPMENT-GULL(TK2129/935 EQUIV..) DC400A (BARFIELD) W/KA MODULE 101-00802 | 7 | |
| DEFECTOSCOP S 2830 | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DEV-499 | COM-1141 - EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DFQ40K | FUEL QUANTITY TEST EQUIPMENT -CONSOLIDATED | 9 | |
| DG-200 | FORCE EQUIPMENT -RUDDER FREEPLAY CHECK (A27124-36) | 9 | |
| DG166609-507 | PLUMBING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DH13PM | FILLING EQUIPMENT - TANK OIL | 5 | |
| DIDSBURY AIR SYSTEM | FUEL TANK EQUIPMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DL056115 | EQUIPMENT HORIZ. STAB FTI FORCEMATE | 1 | |
| DM3 | EQUIPMENT, ULTRASONIC THICKNESS MEASURING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DMAK-A320X-E3K4P0V3 | AIRCRAFT GROUND EQUIPMENT | 1 | |
| DMAK-A320X-E3K4POV3 | AIRCRAFT GROUND EQUIPMENT | 1 | |
| DMAK-C295CN235 | RH ELEVATOR TAB PROTRACTOR - SUPPORT EQUIPMENT AND TOOLS DATA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DO-2159-MAT | FUEL DRAINAGE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DO7010 | RESISTANCE METERING EQUIPMENT WITHOUT DEVICE | 5 | |
| DPI610E | HANDHELD TEST EQUIPMENT | 1 | |
| DPI611-05G | ADAPTER, GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRN5 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT 172899 | DRT 172899 TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT172899 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT66784 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT67968 | EQUIPMENT-LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7071-19 | Constraint Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7085-501 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7157-505 | Sling Equipment - Forward Cargo Door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7312-505 | Bootstrap Equipment | 1 | |
| E-001-TR1 E-002-TR1 E-003-TR1 | HEAT EXCHANGER MAINTENANCE KIT FOR EQUIPMENT SERIAL NUMBERS 102144, 102146, 102151 PART NUMBER E-001-TR1 E-002-TR1 E-003-TR1 OEM LINDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E-RAD 3500 VTS | TORQUE EQUIPMENT - VERTICAL FIN | 1 | |
| E2A | PRESSURE MEASURING EQUIPMENT | 6 | |
| E45 | FLIR THERMACAM E45 INFRARED CAMERA INFRARED EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ED-530 / 851644 | Magnaflux Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ED-530/851644 | Magnaflux Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EI1566 | METERING EQUIPMENT-BIOCIDE-STANDARD EI1566 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ELOTEST M3 | NDT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ELOTEST M3-D | EDDY CURRENT EQUIPMENT ELOTEST | 2 | |
| ELOTEST M3-S | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 1 | |
| ELOTEST-B310 | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 1 | |
| ELOTEST-M3-D | ELOTEST EDDY CURRENT EQUIPMENT (TESTER) | 2 | |
| ELOTESTM3 | EDDY CURRENT EQUIPMENT ELOTEST M3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ELT96A | 9800 0 3 EQUIPMENT | 1 | |
| EMB-01551-001 | FLAP CONTROL UNIT TEST EQUIPMENT (GSE 146) | 1 | |
| EP0CH4PLUS | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EP63740 | ENGINE R/I EQUIPMENT | 1 | |
| EPOCH 1000 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EPOCH 600 | ULTRASONIC INSPECTION EQUIPMENT OLYMPUS | 1 | |
| EPOCH4PLUS | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EQP-PBM-PAC | PHOTONMASTER & PBM EQUIPMENT SET FUNCTIONAL CHECK OF FUEL TANKS FOR MICROORGANISMS | 1 | |
| ET1280 | CRIMP ASSEMBLY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EVO225D OR EQUIVALENT | X RAY MACHINE 200 KVP WITH SAFETY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EXR150-234 | X-RAY EQUIPMENT DC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F101-901 | LOCKING EQUIPMENT-CABLE TENSION REGULATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F2719-500 | TOWING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F27509000 | EXTRACTOR-EQUIPMENT CARRIER | 2 | |
| F28092000 | HANDLING EQUIPMENT FOR THE MAIN LANDING GEAR WHEEL ASSEMBLY | 2 | |
| F2917-19 | TEST EQUIPMENT GROUND FAULT PROTECTION HYDRAULIC SYSTEMS | 1 | |
| F2MA929001 | HOSE FOR CHECKING HYDRAULIC EQUIPMENT ON AIRCRAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F60.0101 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| F70199-25 | TYRE INFLATING EQUIPMENT | 13 | |
| F70258-1 | PERSONNEL BARRIER EQUIPMENT - MAIN CARGO DOOR | 8 | |
| F70266-305 | THREAD PROTECTOR EQUIPMENT | 9 | |
| F70308 | STANDARD TAG -0 SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70313-1 | Standard Box -Support Equipment | 1 | |
| F70313-2 | Standard Box -Support Equipment | 1 | |
| F70313-2/ 36"×24 | STANDARD BOX - SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70313-2/ 36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/32"×28"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-2/36"×24"×12" | STANDARD BOX - SUPPORT EQUIPMENT | 1 | |
| F70313-3 | STANDARD BOX -SUPPORT EQUIPMENT | 1 | |
| F70313-4 | STANDARD BOX - SUPPORT EQUIPMENT | 2 | |
| F70313-5 | Standard Box -Support Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70313-6 | STANDARD BOX - SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70316-1 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70316-140 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70330-104 | Static Balance Equipment - Control Surfaces | 5 | |
| F70330-125 | STATIC BALANCE EQUIPMENT | 7 | |
| F70330-126 | B737NG CONTROL SURFACE STATIC BALANCE EQUIPMENT | 7 | |
| F70330-162 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 3 | |
| F70330-3 | Static Balance Equipment -Control Surface | 10 | |
| F70330-4 | Static Balance Equipment - Control Surfaces | 11 | |
| F70330-87 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 3 | |
| F70330-99 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 2 | |
| F70330-99-M | STATIC BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70331 | REMOVAL & INSTALLATION EQUIPMENT -0 RUDDER PCU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70339-41 | Test Equipment -Door Snubber Extension And Retraction | 2 | |
| F70339-43 | TEST EQUIPMENT - DOOR SNUBBER EXTENSION AND RETRACTION | 4 | |
| F70340 | FUNCTIONAL TEST EQUIPMENT -0 FLAP AND SPOILER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72709 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72719-500 | EYEBOLT, TOWING - MAIN GEAR **FLYAWAY EQUIPMENT** | 18 | |
| F72785-106 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-107 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-108 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72785-11 | TEST EQUIPMENT | 3 | |
| F72785-12 | TEST EQUIPMENT | 3 | |
| F72785-13 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 3 | |
| F72785-53 | Test Equipment - Elevator/Rudder/Aileron Power Control Unit | 1 | |
| F72785-54 | Test Equipment - Elevator/Rudder/Aileron Power Control Unit | 2 | |
| F72785-551 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-552 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 2 | |
| F72785-553 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-554 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-555 | Test Equipment - Elevator/Rudder/Aileron Power Control Unit | 1 | |
| F72785-557 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72785-573 | TEST EQUIPMENT ELEVATOR/ RUDDER/ AILERON POWER CTR | 2 | |
| F72785-XX | Test Equipment -Elevator/Rudder/Aileron Power Control Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72786-181 | CALIBRATION EQUIPMENT ANGLE OF ATTACK SENSOR | 12 | |
| F72859-51 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72867-1 | EQUIPMENT - ADAPTER, CONTROL WHEEL | 23 | |
| F72886-135 | Bootstrap equipment-side engine，JT8D | 3 | |
| F72886-136 | Bootstrap equipment-side engine，JT8D | 2 | |
| F72891-1 | ELECTRICAL TEST EQUIPMENT | 1 | |
| F72903 | PRESSURE TEST EQUIPMENT KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72903-12 | Oil Breather Test Equipment JT8D Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72903-24 | OIL BREATHER PRESSURE TEST EQUIPMEN | 4 | |
| F72903-24 OBPTE | OIL BREATHER PRESSURE TEST EQUIPMEN | 1 | |
| F72917-1 | Test Equipment, Ground Fault Protection | 4 | |
| F72917-19 | TEST EQUIPMENT, GROUND FAULT PROTECTION, HYDRAULIC | 20 | |
| F72928 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-107 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-108 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-109 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-110 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 3 | |
| F72928-111 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-33 | Air Pressure Regulator Equipment - Elevator Feel Computer | 4 | |
| F72928-34 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F72928-52 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 4 | |
| F72928-53 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 5 | |
| F72928-54 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 2 | |
| F72928-58 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER, PRESSURE REGULATOR | 10 | |
| F72928-62 | AIR PRESSURE REGULATOR EQUIPMENT | 8 | |
| F72928-63 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL | 12 | |
| F72928-63. | Air Pressure regulator Equipment-Elevator Feel Com. | 12 | |
| F72928-XX | Air Pressure Regulator Equipment -Elevator Feel Computer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72929-62 | AIR PRESSURE REGULATOR EQUIPMENT - ELEVATOR FEEL COMPUTER | 1 | |
| F7295-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72950 | TRANSPORTATION EQUIPMENT APU | 2 | |
| F72950-1 | A.P.U TRANSPORTATION EQUIPMENT THE | 2 | |
| F72950-127 | AUXILIARY POWER UNIT TRANSPORTATION EQUIPMENT | 1 | |
| F72950-128 | Auxiliary Power Unit Transportation Equipment | 1 | |
| F72950-138 | Transportation Equipment - APU | 8 | |
| F72950-138 -139 -158 | Auxiliary Power Unit Transportation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72950-139 | AUXILIARY POWER UNIT TRANSPORTATION EQUIPMENT | 4 | |
| F72950-158 | AUXILARY POWER UNIT TRANSPORTATION EQUIPMENT | 16 | |
| F72950-3 | Transportation Equipment - APU | 3 | |
| F72951 | WATER MANOMETER-TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72951-1 | TEST EQUIPMENT - WATER MANOMETER | 16 | |
| F72951–1 | WATER MANOMETER - TEST EQUIPMENT | 16 | |
| F72977 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 1 | |
| F72977-26 | EQUIPMENT IS USED DURING MAINTENANCE TO BLEED THE BRAKES. | 5 | |
| F72977-44 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 2 | |
| F72977-45 | TEST EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE | 4 | |
| F72977-46 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 2 | |
| F72977-462 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72977-47 | Gauge Equipment - Hydraulic Brake System Pressure Checking | 4 | |
| F72977-62 | GAGE EQUIPMENT-HYDRAULIC BRAKE SYSTEM PR | 15 | |
| F72977-62 | TEST EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE C | 15 | |
| F72987-1 | TEST EQUIPMENT-BODY TANK CAVITY VENT | 2 | |
| F72987-2 | TEST EQUIPMENT - BODY TANK CAVITY VENT | 2 | |
| F72988-2 | ATTACH BEAMS - ENGINE HANDLING EQUIPMENT | 5 | |
| F72988-2 -3 -4 | Attach Beams -Engine Handling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F72988-3 | ATTACH BEAMS - ENGINE HANDLING EQUIPMENT | 4 | |
| F72988-4 | ATTACH BEAMS - ENGINE HANDLING EQUIPMENT | 1 | |
| F729950-138 | APU transportation equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F73005 | TEST EQUIPMENT-INBOARD AND OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F73007 | ELECTRONIC TEST EQUIPMENT-ELEVATOR FEEL AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F73012-1 | SWAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F73017 | GAGE EQUIPMENT-MAIN LANDING GEAR TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80006-1 | SLING EQUIPMENT -HORIZONTAL STABILIZER | 2 | |
| F80006-1 -2 -51 -52 -54 -67 | Sling Equipment -Horizontal Stabilizer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80006-2 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 4 | |
| F80006-34 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 2 | |
| F80006-51 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 6 | |
| F80006-52 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 10 | |
| F80006-52 ,-54 | Sling Equipment - Horizontal Stabilizer | 1 | |
| F80006-54 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 8 | |
| F80006-67 | SLING EQUIPMENT - HORIZONTAL STABILIZER | 7 | |
| F80014 | HANDING EQUIPMENT-STABILIZER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80014-16 | STABILLIZER JACKSCREW HANDLING EQUIPMENT | 14 | |
| F80014-2 | Handling Equipment - Stabillizer Jackscrew | 13 | |
| F80016-19 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 5 | |
| F80017-23 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 12 | |
| F80027-13 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 6 | |
| F80027-18 | Lock Equipment - Horizontal Stabilizer | 18 | |
| F80027-41 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 9 | |
| F80027-44 | LOCK EQUIPMENT- HORIZONTAL STABILIZER | 7 | |
| F80027-44 | LOCK EQUIPMENT - HORIZONTAL STABILIZER | 7 | |
| F80039-1 | Hoist Equipment, Auxiliary Power Unit | 8 | |
| F80039-43 | Hoist Equipment - Auxiliary Power Unit | 6 | |
| F80040-2 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 28 | |
| F80055-10 | MEASURING EQUIPMENT | 7 | |
| F80055-36 | TRAMMEL BAR EQUIPMENT ASSEMBLY | 6 | |
| F80080-101 | Test Equipment - Vent Plug, Structural | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80080-112 | Test Equipment - Plug, Drain Valve | 1 | |
| F80080-88 | Test Equipment - Access Closure Plug, Vent Scoop | 2 | |
| F80080-92 | Test Equipment - Vent Plug, Center Tank | 1 | |
| F80114-25 | Cradle. Garrett Auxiliary Power Unit?S (Apu) -Hoist Equipment | 9 | |
| F80114-35+A9137 | Hoist Equipment Upgrade -35 from -25 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80114-8 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80114-81 | CRADLE, GARRETT AUXILIARY POWER UNIT'S (APU) - HOIST EQUIPMENT | 4 | |
| F80114-82 | CRADLE, GARRETT AUXILIARY POWER UNIT'S (APU) - HOIST EQUIPMENT | 9 | |
| F80122-11 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 2 | |
| F80122-12 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 3 | |
| F80122-13 | ADAPTER EQUIPMENT TORQUE WRENCH FLAP DRIVE TRANSMISSION | 2 | |
| F80122-14 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE | 11 | |
| F80122-15 | ADAPTER EQUIPMENT-TORQUE WRENCH, FLAP DRIVE | 10 | |
| F80122-16 | ADAPTER EQUIPMENT - TORQUE WRENCH | 9 | |
| F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80126-9 | Puller Equipment -Sleeve. Axle Assembly. Main Landing Gear | 7 | |
| F80145-4 | EQUIPMENT - VENTILATION, FUEL TANK | 10 | |
| F80166-1 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE | 24 | |
| F80168-1 | EQUIPMENT - REMOVAL / INSTALLATION, WHEEL RETENTION NUT - MLG AND NLG | 30 | |
| F80177-14 | Bolt Removal Equipment -Horizontal Stabilizer | 5 | |
| F80179-1 | TEST EQUIPMENT RETRACT | 6 | |
| F80188-14 | Sling Equipment APU | 1 | |
| F80188-17 | Sling Equipment APU | 10 | |
| F80201-1 | SAMPLING FUEL EQUIPMENT | 30 | |
| F80205-1 | Bearing Swaging Equipment | 3 | |
| F80207-1 | Instl/removal equipment-Apu heat shield | 3 | |
| F80208-1 | Test Equipment - Auto Speed Brake Test Box | 5 | |
| F80213-73 | SLING EQUIPMENT - TRAILING EDGE FLAPS | 10 | |
| F80213-78 | Sling equipment-trailing edge flaps | 12 | |
| F80219-45 | LOAD INDICATING SYSTEM - ENGINE INSTALLATION EQUIPMENT | 3 | |
| F80219-45 -46 -47 -48 -68 -69 | Load Indicating System -Engine Installation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80219-46 | Load Indicating System - Engine Installation Equipment | 4 | |
| F80219-47 | Load Indicating System - Engine Installation Equipment | 4 | |
| F80219-48 | LOAD INDICATING SYSTEM - ENGINE INSTALLATION EQUIPMENT | 5 | |
| F80219-49 | LOAD INDICATING SYSTEM ENGINE INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80219-50 | LOAD INDICATING SYSTEM ENGINE INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80219-57 | LOAD INDICATING SYSTEM ENGINE INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80219-58 | LOAD INDICATING SYSTEM ENGINE INSTALL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80219-68 | Equipment | 5 | |
| F80219-69 | Load Indicating System - Engine Installation Equipment | 4 | |
| F80224-60 | TEST EQUIPMENT - FLIGHT SPOILER POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80224-79 | TEST EQUIPMENT - FLIGHT SPOILER POWER CONTROL UNIT | 5 | |
| F80225-1 | FCC TEST EQUIPMENT - SP177 DUAL CHANNEL AUTOPILOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80225-19 | FCC TEST EQUIPMENT - SP177 DUAL CHANNEL, AUTOPILOT (BOEING 737-200) | 2 | |
| F80229 | TEST EQUIPMENT-FIRE EXTINGUISHING | 4 | |
| F80229 -59 | CABLE ASSY - FIRE EXTINGUISHING SYSTEM TEST EQUIPMENT - 737-300/400/500/600/700/800/900 | 14 | |
| F80229-15 | Test equipment, fire extinguishing system | 6 | |
| F80229-20 | Test Equipment - Fire Extinguishing System | 15 | |
| F80229-48 | ADAPTER CABLE ASSEMBLY - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM | 12 | |
| F80229-5 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80229-52 | Test Equipment -Fire Extinguishing System | 17 | |
| F80229-55 | Test Equipment - Fire Extinguishing System | 4 | |
| F80229-56 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 5 | |
| F80229-57 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 6 | |
| F80229-58 | Test Equipment - Fire Extinguishing System | 4 | |
| F80229-59 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 14 | |
| F80229-6 | CABLE ASSY - FIRE EXTINGUISHING SYSTEM TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80229-60 | Test Equipment -Fire Extinguishing System | 8 | |
| F80229-61 | CABLE ASSY - FIRE EXTINGUISHINGSYSTEM TEST EQUIPMENT | 15 | |
| F80229-69 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM (SEE ITEL FOR CABLE ASSEMBLIES REQUIRED) -69 REPLACES -15 FOR FUTURE PROCUREM (THE BOEING COMPANY) | 16 | |
| F80233-1 | Test Equipment Plug - Ram Air Duct Installation | 2 | |
| F80234-1 | RETENTION STRAP EQUIPMENT | 14 | |
| F80237-1 | EQUIPMENT COOLING SYSTEM PERFORMANCE TEST | 2 | |
| F80237-1 / C21001-1 | Equipment Cooling System Performance Test Set | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80237-13 | TEST SET -0 EQUIPMENT COOLING SYSTEM PERFORMANCE | 4 | |
| F80240-1 | Restraint Equipment -Passenger Window | 3 | |
| F80244-1 | Restraint Equipment -Main Landing Gear Airplane Recovery | 1 | |
| F80245-1 | Restraint Equipment -Outboard Trailing Edge Flap Tracks. Wbl 254 And 355 | 1 | |
| F80246-1 | CHECKING EQUIPMENT-AXIAL PLAY,CARRIAGE THRUST BEAR | 2 | |
| F80251-1 | Bearing Equipment - Ground Spoiler Actuator Support | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80255-1 | ALIGNMENT AND GUIDE EQUIPMENT - HORIZONTAL STABILIZER INSTALLATION AND REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80255-10 | ALIGNMENT AND GUIDE EQUIPMENT - HORIZONTAL STABILI | 5 | |
| F80255-11 | ALIGNMENT AND GUIDE EQUIPMENT | 12 | |
| F80255-12 | ALIGNMENT AND GUIDE EQUIPMENT - HORIZONTAL STABILIZER INSTALLATION AND REMOVAL | 6 | |
| F80255-XX | Alignment And Guide Equipment -Horizontal Stabilizer Installation And Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80258-1 | Test Equipment - Wing Dry Bay Pressurization | 2 | |
| F80262-1 | Vise Jaw Equipment | 2 | |
| F80266-30 | Test Equipment-L.E. Flap Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80266-40 | TEST EQUIPMENT-LE FL | 1 | |
| FAK90223 | ENGINE TRANSPORTATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB0251-1 | BEARING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FD1102-00.45 | LANDING GEAR MEASUREMENT TEST EQUIPMENT (BRAKE BOX) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FD7030T-117 | WATER MANOMETER - TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FDA40-5012 | CVR Download equipment | 1 | |
| FDS 400-301 | HHMPI (HANDHELD MULTI-PURPOSE INTERFACE) EQUIPMENT KIT | 13 | |
| FDS40-0203 | HAND-HELD MUTI-PURPOSE INTERFACE CABLE (HHMPI CABLE) ( NOTE: THIS ITEM NORMALLY ACCOMPANIED WITH HHMPI AS A SET OF TEST EQUIPMENT.) | 6 | |
| FDS40-0301 | TEST EQUIPMENT | 13 | |
| FDS400-301 | FLY DATE EQUIPMENT | 13 | |
| FDS47-0103 | READ-OUT SUPPORT EQUIPMENT/RECORDER INTE | 1 | |
| FE101-901 | LOCKING EQUIPMENT - CABLE TENSION REGULATOR | 2 | |
| FE101901 | LOCKING EQUIPMENT - CABLE TENSION REGULATOR | 2 | |
| FE104901 | LOCKING EQUIPMENT-L.S.A.CABLE TENSION REGULATOR | 1 | |
| FE214-901 | LOCKING,EQUIPMENT - CABLE TENSION REGULATOR | 1 | |
| FG5 | RIGGING BAR EQUIPMENT - ELEVATOR TAB C27028-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FLIR T250 | FLIR T250 THERMAL IMAGING INFRARED EQUIPMENT | 1 | |
| FMG 4400D | STROBE LIGHT TEST EQUIPMENT (100 VOLTS) | 8 | |
| FMG4400D | STROBE LIGHT TEST EQUIPMENT (100 VOLTS) | 8 | |
| FMG4400DE | STROBE LIGHT TEST EQUIPMENT 100 VOLTS | 5 | |
| FXT-13304 | AUTOMATIC TEST EQUIPMENT (ATE) (FXT-13304) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G | SLING EQUIPMENT -VERTICAL FIN (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07001-1 | FITTING EQUIPMENT - CABLE SUPPORT AIRPLANE LIFT RECOVERY | 1 | |
| G07001-37 | FITTING EQUIPMENT - CABLE SUPPORT, AIRPLANE LIFT RECOVERY | 1 | |
| G07002-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 2 | |
| G07003 | TETHER FITTING EQUIPMENT- TAIL SECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07003-16 | TETHER FITTING EQUIPMENT - TAIL SECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07003-32 | TETHER FITTING EQUIPMENT - TAIL SECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07004-1 | Jacking Bar Equipment -Main Landing Gear (Ce) | 4 | |
| G07009-1 | JACKING ADAPTER RECOVERY EQUIPMENT - AFT INBOARD AND OUTBOARD DIAGONAL BRACE | 1 | |
| G07010-1 | Tether Fitting Equipment - Tail Section | 1 | |
| G07011-1 | Tether Restraint Equipment -Entry Doors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G07011-2 | Tether Restraint Equipment -Entry Doors | 1 | |
| G07012-1 | TETHER FITTING EQUIPMENT - OUTBOARD ENGINE, AFT STRUT LOCATION | 2 | |
| G10002-1 | COVER EQUIPMENT - EXHAUST DUCT, GENERATOR AIR, JT9D ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G10005-1 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GEnx-2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G10005-14 | Protective Plug Equipment -Engine Exhaust. Genx-2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G10005-23 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GEnx-2B | 3 | |
| G10006-1 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G10006-15 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST | 3 | |
| G20001 | SWAGING EQUIPMENT -0 FORE FLAP LEVER BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G20001-1 | Swag Equipment - Fore Flap Lever Bearing | 1 | |
| G20001-18 | Swaging Equipment - Fore Flap Lever Bearing | 3 | |
| G20003-15 | Stkg Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G20004-15 | STAKING EQUIPMENT- M | 3 | |
| G20008-1 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, ENGINE/STRUT | 3 | |
| G20011-1 | PERSONNEL EQUIPMENT - LINK AND ENERGY ABSORBING LANYARD, WING/HORIZONTAL STABILIZER | 6 | |
| G20014-1 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST | 2 | |
| G21002-30 | TEST EQUIPMENT-PRESSURIZATION, OUTFLOW VALVE ALTITUDE SIMULATOR | 3 | |
| G21008-1 | ADAPTER EQUIPMENT - AIR CYCLE MACHINE (CE) | 2 | |
| G21009-1 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G21009-40 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM (CE) | 1 | |
| G21009-57 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM (CE) | 1 | |
| G21009-65 | ADAPTER EQUIPMENT - HEAT EXCHANGER/PLENUM | 2 | |
| G21013-1 | TEST EQUIPMENT - FLIGHT DECK HEATERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G21013-2 | TEST EQUIPMENT - FLIGHT DECK HEATERS | 1 | |
| G22001-123 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-140 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-147 | TEST EQUIPMENT | 2 | |
| G22001-148 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-154 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-166 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-167 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-168 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22001-199 | TEST EQUIPMENT - LOW RANGE RADIO ALTIMETER (LRRA) SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22003-132 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22003-133 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22003-134 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G22003-135 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | |
| G22005-1 | TEST EQUIPMENT - LIMIT SWITCH TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G24004-51 | HOIST EQUIPMENT - MAIN BATTERY AND E57 BATTERY REMOVAL AND INSTALLATION (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G24004-70 | HOIST EQUIPMENT - MAIN BATTERY R/I | 8 | |
| G24005 | DISPATCH EQUIPMENT, IDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G24005-24 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR (IDG), CF6-80C2 ENGINE | 4 | |
| G24007-1 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR, PW4000 | 1 | |
| G24008-1 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR (IDG), RB211-524G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G24014-1 | Hoist Equipment -Apu Battery | 2 | |
| G24014-60 | HOIST EQUIPMENT - APU BATTERY | 5 | |
| G24015-1 | Dispatch Equipment -Apu Generator Blanking Plate | 4 | |
| G24016-1 | DISPATCH EQUIPMENT ENGINE | 4 | |
| G25007-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G25008 | EQUIPMENT -0 FALL PROTECTION, 747 S.U.D. DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G25008-1 | EQUIPMENT - FALL PROTECTION, 747 SLIDE UPPER DECK DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G25009 | HANDLING EQUIPMENT -0 UPPER DECK SLIDE LOADING & | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G25009-29 | Handling Equipment | 3 | |
| G25010-133 | GANTRY EQUIPMENT - PASSENGER SEAT | 2 | |
| G25010-167 | GANTRY EQUIPMENT - PASSENGER SEAT | 4 | |
| G25010-169 | GANTRY EQUIPMENT - PASSENGER SEAT | 1 | |
| G25010-174 | GANTRY EQUIPMENT- PASSENGER SEAT, | 2 | |
| G25010-175 | GANTRY EQUIPMENT- PASSENGER SEAT | 1 | |
| G25010-98 | GANTRY EQUIPMENT - PASSENGER SEAT | 1 | |
| G25011-1 | LIFTING EQUIPMENT - SUPERNUMERARY MONUMENTS (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G25011-2 | Lifting Equipment - Supernumerary Monuments (Ce) | 1 | |
| G25012-8 | TOOL KIT, MAINTENANCE, AIRCRAFT EQUIPMENT | 12 | |
| G25013-1 | LIFTING EQUIPMENT - OVERHEAD CREW REST (CE) | 3 | |
| G25013-9 | Lifting Equipment -Overhead Crew Rest (Ce) (Optional) | 1 | |
| G25016-1 | SLING EQUIPMENT - SLIDE REMOVAL, STRETCHED UPPER DECK (CE) | 1 | |
| G2600-167 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001 | TEST EQUIPMENT -0 FIRE EXTINGUISHER SYSTEM | 2 | |
| G26001-105 | TEST EQUIPMENT | 5 | |
| G26001-161 | TEST EQUIPMENT | 4 | |
| G26001-162 | Test Equipment -Fire Extinguishing System | 3 | |
| G26001-163 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 3 | |
| G26001-165 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 3 | |
| G26001-166 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 4 | |
| G26001-166 / G26001-167 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 1 | |
| G26001-167 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 3 | |
| G26001-168 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 2 | |
| G26001-36 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-4 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-57 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-61 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-67 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-68 | TEST EQUIPMENT - FIRE | 1 | |
| G26001-69 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 1 | |
| G26001-7 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26001-70 | Test Equipment -Fire Extinguishing System | 3 | |
| G26001-71 | ADAPTER CABLE - TEST EQUIPMENT, | 2 | |
| G26001-72 | ADAPTER CABLE - TEST EQUIPMENT, | 5 | |
| G26001-73 | ADAPTER CABLE-TEST EQUIPMENT FIRE EXTINGUSHING SYS | 3 | |
| G26001-74 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 3 | |
| G26001-91 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | 1 | |
| G26001-92 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26002-42 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26006-1 | CLEANING EQUIPMENT - SMOKE DETECTION SYSTEM | 1 | |
| G26006-61 | CLEANING EQUIPMENT - SMOKE DETECTOR SYSTEM | 3 | |
| G26008-13 | TEST EQUIPMENT - NON-METERED DISCHARGE TUBING, CARGO FIRE EXTINGUISHER | 1 | |
| G26009-1 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26009-130 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING EQUIPMENT | 2 | |
| G26009-2 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26009-87 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING EQUIPME | 2 | |
| G26009-88 | Test Equipment -Engine Fire Extinguishing Equipment | 2 | |
| G26009-89 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING EQUIPMENT | 3 | |
| G26009-90 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26010-134 | R/I EQUIPMENT | 1 | |
| G26010-135 | INSTALLATION/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26010-176 | INSTL/REMOVAL EQUIPMENT - FIRE EXTINGUISHER BOTTLE (LWR. CARGO COMPT) | 4 | |
| G26010-177 | Installation And Removal Equipment -Fire Extinguisher Bottle (Ce) | 1 | |
| G26012 | SLING EQUIPMENT-UPPER RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26012-44 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26012-52 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27001-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER ACTUATOR NUMBER 5 AND NUMBER 8 | 10 | |
| G27002-1 | LOCK OPEN EQUIPMENT - INBOARD SPOILER | 9 | |
| G27003-1 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27003-55 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27003-80 | TEST EQUIPMENT - TRANSMISSION AND TORQUE LIMITER, TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27005-16 | SWAGING EQUIPMENT - SEAL RING, OUTBOARD TRANSMISSION, OUTBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27006-16 | SWAGING EQUIPMENT - SEAL RING, INBOARD TRANSMISSION, OUTBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27007-16 | SWAGING EQUIPMENT - SEAL RING, INBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27008-19 | LOCK EQUIPMENT - RUDDER ACTUATOR | 8 | |
| G27008-41 | LOCK EQUIPMENT - RUDDER ACTUATOR | 3 | |
| G27009-19 | Test Equipment | 4 | |
| G27012 | SLING EQUIPMENT -0 UPPER RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27012-44 | SLING EQUIPMENT - UPPER RUDDER | 5 | |
| G27012-52 | Sling equipment-upper rudder | 3 | |
| G27012-62 | SLING EQUIPMENT - UPPER RUDDER | 1 | |
| G27016-68 | HOIST FRAME EQUIPMENT | 1 | |
| G27016-69 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 5 | |
| G27016-70 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27016-96 | HOIST FRAME EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27018 | RIGGING EQUIPMENT -0 SPEED BRAKE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27018-1 | RIGGING EQUIPMENT - SPEED BRAKE CONTROL | 2 | |
| G27022 | TEST EQUIPMENT -0 BACKLASH, L.E. FLAP ROTARY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27022-14 | TEST EQUIPMENT - BACKLASH, LEADING EDGE FLAP ROTARY ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27023-1 | TEST EQUIPMENT - FREEPLAY | 10 | |
| G27023-104 | DIGITAL READOUT EQUIPMENT | 1 | |
| G27023-107 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27023-113 | TEST EQUIPMENT - FREEPLAY | 2 | |
| G27023-124 | TEST EQUIPMENT - RUDDER | 4 | |
| G27023-125 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 4 | |
| G27023-126 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 1 | |
| G27023-136 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 4 | |
| G27023-39 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27023-40 | MEASUREMENT EQUIPMENT - RUDDER PCA | 2 | |
| G27024-1 | LOCK EQUIPMENT - FLA | 8 | |
| G27025-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27025-22 | Test Equipment -Trailing Edge Flap Alternate Drive Motor Current | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27025-23 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27025-24 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27025-25 | TEST EQUIPMENT -TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | 1 | |
| G27025-4 | TEST EQUIPMENT - TRAILING EDGE FLAP ALTERNATE DRIVE MOTOR CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27027-44 | CONTROL BOX EQUIPMENT - POWER PACK, TRAILING EDGE FLAP DRIVE | 1 | |
| G27028 | MEASURING EQUIPMENT -0 VARIABLE CAMBER FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27028-1 | Measuring equipment-variable camber flap actr backlash | 2 | |
| G27028-1-M | MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27035-1 | EQUIPMENT - SLING, ELEVATOR RAI | 5 | |
| G27036 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 1 | |
| G27036-143 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 2 | |
| G27036-186 | Measuring Equipment -Horizontal Stabilizer Hinge Bearing Free Play | 6 | |
| G27036-74 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | 4 | |
| G27036-75 | MEASURING EQUIPMENT - HORIZONTAL STABILIZER HINGE BEARING FREE PLAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27037 | LOCK EQUIPMENT -0 T.E. FLAP SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27037-1 | Lock Equipment | 2 | |
| G27037-13 | Lock equipment-T.E. flap system | 7 | |
| G27037-21 | LOCK EQUIPMENT - TRAILING EDGE FLAP SYSTEM | 4 | |
| G27039-1 | TEST JIG EQUIPMENT - LOCKOUT MECHANISM, OUTBOARD AILERON | 1 | |
| G27040-1 | PERSONNEL LANYARD EQUIPMENT - WING | 3 | |
| G27042-103 | SLING EQUIPMENT - FLAP TRACK (CE) | 2 | |
| G27042-39 | Sling Equipment -Flap Track (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27042-92 | SLING EQUIPMENT - FLAP TRACK (CE) | 1 | |
| G27042-93 | SLING EQUIPMENT - FLAP TRACK (CE) | 1 | |
| G27042-97 | SLING EQUIPMENT - FLAP TRACK | 1 | |
| G27043 | HANDLING EQUIPMENT -0 HORIZONTAL STABILIZER1 | 2 | |
| G27043-119 | Handling Equipment -Horizontal Stabilizer Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27043-120 | Handling Equipment -Horizontal Stabilizer Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27043-121 | Handling Equipment -Horizontal Stabilizer Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27043-208 | HANDLING EQUIPMENT - HORIZONTAL STABILIZER ACTUATOR | 5 | |
| G27043-209 | HANDLING EQUIPMENT | 4 | |
| G27043-210 | HANDLING EQUIPMENT - HORIZONTAL STABILIZER ACTUATOR (CE) | 7 | |
| G27043-2100 | EQUIPMENT - HANDLING, HORIZONTAL STAB TRIM ACTUATOR REMVL & INSTL | 1 | |
| G27046-119 | FUNCTIONAL TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27046-138 | FUNCTIONAL TEST EQUIPMENT - TRAILING EDGE FLAP TRANSMISSION | 1 | |
| G27047-1 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS (CE) | 1 | |
| G27047-54 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS | 4 | |
| G27047-59 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS (CE) | 2 | |
| G27047-63 | INSTALLATION AND REMOVAL SLING EQUIPMENT - MAIN CARRIAGE ASSEMBLY, TRAILING EDGE FLAPS | 1 | |
| G27048-1 | Test Equipment - Inboard Elevator Actuator | 8 | |
| G27049-35 | REMOVAL/INSTALLATION EQUIPMENT - OUTBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27049-74 | Removal/Installation Equipment -Outboard Trailing Edge Flap (Ce) | 4 | |
| G27051-45 | REMOVAL AND INSTALLATION EQUIPMENT - INBOARD AILERON PCU | 2 | |
| G27053-54 | HANDLING EQUIPMENT - REMOVAL AND INSTALLATION, INBOARD AND OUTBOARD SPOILERS (CE) | 1 | |
| G27054-1 | Lock Equipment -Inboard Aileron | 1 | |
| G27060-1 | SLING EQUIPMENT - REMOVAL/INSTALLATION, OUTBOARD AILERON (CE) | 4 | |
| G27063-69 | Lock Equipment -Trailing Edge Flaps And Carriages | 2 | |
| G27063-76 | LOCK EQUIPMENT - TRAILING EDGE FLAPS AND CARRIAGES | 6 | |
| G27065-14 | Lock Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27065-18 | LOCK EQUIPMENT - OUTBOARD AILERON POWER CONTROL UNIT | 3 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 4 | |
| G27067-2 | Checking Fixture Equipment -Ball Nut. Trailing Edge Flap Drive | 3 | |
| G27067-80 | Checking Fixture Equipment | 5 | |
| G27067-81 | Fixture Equipment | 5 | |
| G27072-1 | Rigging Beam Equipment - Inboard Aileron | 5 | |
| G27073-1 | Bootstrap Clamp Equipment - Fairing TE Flap Track | 3 | |
| G27074-1 | Sling Equipment - Lower Rudder | 2 | |
| G27074-2 | SLING EQUIPMENT - LOWER RUDDER REMOVAL AND INSTALLATION | 3 | |
| G27075-1 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL ASSEMBLY (PCA) REMOVAL/INSTALLATION | 2 | |
| G27076-1 | POSITIONER EQUIPMENT - ROD END, RUDDER PCA | 2 | |
| G27077-1 | REMOVAL / INSTALLATION EQUIPMENT - MAIN CARRIAGE BOGIE PIN, INBOARD TRAILING EDGE FLAPS | 1 | |
| G27078-1 | PIN PULLER EQUIPMENT - BOGIE, OUTBOARD TRAILING EDGE FLAPS CARRIAGE | 2 | |
| G27079-1 | Removal/Installation Equipment -Forward Attach Fitting. Inboard Trailing Edge Flaps | 3 | |
| G27085-49 | Hoist equipment-upper rudder | 5 | |
| G27086-1 | MEASURING EQUIPMENT - FREEPLAY, LOWER RUDDER TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27086-17 | MEASURING EQUIPMENT - FREE PLAY, LOWER RUDDER TAB | 3 | |
| G27088-1 | Support Equipment -Variable Chamber Krueger And Krueger Flaps | 1 | |
| G27088-2 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G27088-3 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G27088-4 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27088-5 | Support Equipment -Variable Chamber Krueger And Krueger Flaps | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27095-1 | Ladder Equipment - Upper Lobe Access | 3 | |
| G27097-1 | DISASSEMBLY/ASSEMBLY EQUIPMENT - FLAP FLAG DETECTION SYSTEM ASSEMBLY | 1 | |
| G27098-1 | Hoisting Equipment -Inboard Trailing Edge Flap Actuator. Positions 4 And 5 (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G27098-42 | HOISTING EQUIPMENT - INBOARD TRAILING EDGE FLAP ACTUATOR, POSITIONS 4 AND 5 (CE) | 5 | |
| G27099-1 | CHECKING EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE, TRACKS 4 AND 5 | 3 | |
| G27100-1 | Hose Equipment - Freeplay Check, Rudder Actuator | 2 | |
| G27101-1 | MEASUREMENT EQUIPMENT - ROD END PLAY, LOWER RUDDER PCU | 2 | |
| G27103-35 | REMOVAL/INSTALLATION EQUIPMENT - INBOARD TRAILING | 2 | |
| G27104-1 | REMOVAL/INSTALLATION EQUIPMENT - VARIABLE CAMBER FLAP PANEL HINGE FASTENERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28001 | AIR MOVING EQUIPMENT -0 AUXILIARY FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28001-1 | AIR MOVING EQUIPMENT - AUXILIARY FUEL TANK VENTILATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28001-22 | AIR MOVING EQUIPMENT-AUXILIARY FUEL TANK VENTILATION | 2 | |
| G28002-48 | TEST EQUIPMENT | 2 | |
| G28003-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28005 | CHECK FIXTURE EQUIPMENT-PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE | 2 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE | 1 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 2 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-35 | CHECK FIXTURE-EQUIPMENT SPL-8420 | 16 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | Check Fixture Equipment - Pressure Relief Valve | 2 | |
| G28005-48 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28006 | ADAPTER EQUIPMENT -0 CALIBRATION, FUEL QUANTITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28006-1 | ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY TOTALIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28008-1 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28008-2 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28009 | PLUG EQUIPMENT -0 HORIZONTAL STABILIZER/APU FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28009-1 | PLUG EQUIPMENT - HORIZONTAL STABILIZER/APU FUEL TRANSFER SHROUDS AND DRAIN LINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28009-24 | PLUG EQUIPMENT - HORIZONTAL STABILIZER/APU FUEL TRANSFER SHROUDS AND DRAIN LINES | 6 | |
| G28009-25-M | PLUG EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28012-1 | TEST EQUIPMENT - PRESSURE/LEAKAGE, FUEL LINES AND FITTINGS | 2 | |
| G28013-16 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28013-20 | TEST EQUIPMENT - OVERRIDE/JETTISON FUEL PUMP, FAULT CURRENT | 7 | |
| G28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VALVES | 9 | |
| G28014-15 | Adapter Equipment - Fuel Sump Drain Valve | 1 | |
| G28017-1 | TEST EQUIPMENT - HORIZONTAL STABILIZER FUEL TANK AND VENT SYSTEM | 2 | |
| G28018 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 1 | |
| G28018-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28018-2 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFO | 8 | |
| G28018-26 | Test Equipment -Engine Fuel Feed Manifold | 7 | |
| G28018-28 | TEST EQUIPMENT - FUEL MANIFOLD | 11 | |
| G28018-29 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 1 | |
| G28018-3 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28018-31 | Test Equipment -Engine Fuel Feed Manifold | 1 | |
| G28018-32 | TEST EQUIPMENT | 3 | |
| G28018-33 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 2 | |
| G28018-4 | Test Equipment -Engine Fuel Feed Manifold | 3 | |
| G28018-5 | Test Equipment -Engine Fuel Feed Manifold | 1 | |
| G28018-6 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 4 | |
| G28018-61 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 2 | |
| G28018-65 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 2 | |
| G28018-7 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 5 | |
| G28019 | TEST EQUIPMENT -0 FUEL TANK LEAK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28019-16 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28019-17 | TEST EQUIPMENT - FUEL TANK LEAK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28019-72 | FUEL TANK LEAK TEST EQUIPMENT | 1 | |
| G28019-73 | TEST EQUIPMENT-FUEL TANK LEAK | 2 | |
| G28019-89 | TEST EQUIPMENT - FUEL TANK LEAK | 2 | |
| G28019-90 | Test Equipment | 2 | |
| G28022-1 | BLANKING PLATES AND PLUG EQUIPMENT - AUXILIARY TANK REFUEL/ TRANSFER LINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28023-1 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28023-30 | TEST/RECOVERY DEFUEL EQUIPMENT - AUXILIARY TANK, FUEL SYSTEM | 1 | |
| G28023-61 | TEST/RECOVERY DEFUEL EQUIPMENT - AUXILIARY TANK, FUEL SYSTEM | 1 | |
| G28023-62 | TEST/RECOVERY DEFUEL EQUIPMENT - AUXILIARY TANK, FUEL SYSTEM | 1 | |
| G28025-22 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28035-1 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
| G28035-2 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
| G29003 | DISPATCH EQUIPMENT -0 ENGINE DRIVEN HYDRAULIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G29003-5 | DISPATCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G29003-8 | Disptch Equipment | 5 | |
| G29004 | DISPATCH EQUIPMENT -0 EDP SYSTEM, CF6-50 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G29004-9 | DISPATCH EQUIPMENT - ENGINE DRIVEN PUMP SYSTEM, CF6-50 ENGINE | 3 | |
| G29005-1 | DISPATCH EQUIPMENT - ENGINE DRIVEN HYDRAULIC PUMP, | 8 | |
| G29008-1 | REMOVAL AND INSTALLATION EQUIPMENT - RAM AIR TURBINE (CE) | 2 | |
| G29009-1 | PROTECTIVE EQUIPMENT - RAM AIR TURBINE (RAT) LOWER TURBINE GEARBOX ASSEMBLY | 2 | |
| G29010-1 | ADU Rmvl Instl Equipment | 1 | |
| G29010-2 | REMOVAL/INSTALLATION EQUIPMENT ‚AIR DRIVE UNIT AND PUMP (CE) | 1 | |
| G29012-1 | PROTECTIVE EQUIPMENT - UP LOCKED POSITION, RAM AIR TURBINE (RAT) | 2 | |
| G29013-1 | DISPATCH EQUIPMENT-ENGINE DRIVEN HYDRAULIC PUMP | 5 | |
| G29013-1 | DISPATCH EQUIPMENT - , GENX-2B, ENGINE DRIVEN HYDRAULIC PUMP | 5 | |
| G29014-1 | EXTENSION EQUIPMENT - GROUND SERVICE DISCONNECT, LEFT/ RIGHT HYDRAULIC SYSTEMS | 5 | |
| G29015-1 | GROUND FAULT PROTECTION SYSTEM TEST EQUIPMENT | 7 | |
| G32002-1 | TEST SLUG EQUIPMENT - POSITION PROXIMITY SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32004-5 | GAGE EQUIPMENT - TRUNNION AND DRAG LINK FITTING INSTALLATION, NOSE LANDING GEAR | 5 | |
| G32005-8 | GAGE EQUIPMENT - BUSHING ASSEMBLY INSTALLATION, VERTICAL SUPPORT FITTING, INBOARD ASSEMBLY | 4 | |
| G32009 | TEST EQUIPMENT -0 RETRACT ACTUATOR, WING MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32009-45 | TEST EQUIPMENT - RETRACT ACTUATOR, WING LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32009-46 | Test Equipment | 2 | |
| G32010 | PULLER EQUIPMENT -0 AXLE SLEEVE, M.L.G. AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32010-1 | PULLER EQUIPMENT-AXLE SLEEVE,MLG AND NLG | 4 | |
| G32010-2 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| G32010-3 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR AND NOSE LANDING GEAR | 3 | |
| G32012-1 | BRAKE PULLER EQUIPMENT - MAIN LANDING GEAR | 2 | |
| G32012-11 | EQUIPMENT - PULLER, MAIN LANDING GEAR BRAKE SPL-1857 | 10 | |
| G32014-26 | TEST EQUIPMENT - TORQUE SENSOR, BRAKE CONTROL | 3 | |
| G32014-27 | TEST EQUIPMENT -TORQUE SENSOR. BRAKE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32014-28 | TEST EQUIPMENT - TORQUE SENSOR, BRAKE CONTROL | 4 | |
| G32017-13 | TORQUE EQUIPMENT - TRUCK POSITIONER ACTUATOR, WING GEAR | 2 | |
| G32018 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-104 | TEST EQUIPMENT - HARD GROUND JUMPER | 1 | |
| G32018-108 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-109 | TEST EQUIPMENT - HARD GROUND JUMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-110 | TEST EQUIPMENT - HARD GROUND JUMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-111 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-112 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-113 | TEST EQUIPMENT - HARD GROUND JUMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-114 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-115 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-116 | TEST EQUIPMENT - HARD GROUND JUMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-117 | TEST EQUIPMENT - HARD GROUND JUMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32018-2 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32019-1 | ROLLER SWAGING EQUIPMENT - OUTBOARD TRUNNION BEARING ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32021-18 | EQUIPMENT - FORCE GAGE, LANDING GEAR LEVER | 14 | |
| G32021-7 | EQUIPMENT FORCE GAGE LANDING GEAR LEVER | 2 | |
| G32022 | TEST EQUIPMENT -0 TORSION LINE FREE PLAY CHECK, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32022-1 | TEST EQUIPMENT - TORSION LINK FREE PLAY CHECK, NOSE LANDING GEAR | 9 | |
| G32025-1 | BRAKE PULLER EQUIPMENT - MAIN LANDING GEAR | 1 | |
| G32029-2 | TORQUE EQUIPMENT - TRUNNION BOLTS, NOSE LANDING GEAR | 2 | |
| G32029-53 | TORQUE EQUIPMENT - TRUNNION BOLTS, NOSE LANDING GEAR | 2 | |
| G32032-1 | Holding Equipment | 4 | |
| G32033-1 | SLING EQUIPMENT - LOWER SEAL REMOVAL/INSTALLATION, NOSE LANDING GEAR | 5 | |
| G32033-18 | SLING EQUIPMENT - LOWER SEAL REMOVAL/INSTALLATION, NOSE LANDING GEAR (CE) | 3 | |
| G32036-1 | PIN ASSEMBLY EQUIPMENT - GROUND LOCK, NOSE LANDING GEAR | 8 | |
| G32036-2 | PIN ASSEMBLY EQUIPMENT - GROUND LOCK, NOSE LANDING GEAR | 5 | |
| G32039-25 | Wrench Equipment -Wheel Retention Nut. Wlg And Blg | 5 | |
| G32039-42 | WRENCH EQUIPMENT - WHEEL RETENTION NUT, | 4 | |
| G32040-1 | Puller Equipment -Axle Sleeve. Body Landing Gear. Main Landing Gear And Nose Landing Gear | 2 | |
| G32044-1 | REMOVAL/INSTALLATION EQUIPMENT - JURY AND DRAG STRUT, BODY LANDING GEAR (CE) | 2 | |
| G32045-1 | Brake Puller Equipment -Wing And Body Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32046-1 | REMOVAL/INSTALLATION EQUIPMENT - RETRACT ACTUATOR, BODY LANDING GEAR (CE) | 4 | |
| G32047-1 | REMOVAL/INSTALLATION EQUIPMENT - TRUNNION FORK, WING LANDING GEAR (CE) | 4 | |
| G32048-1 | Lock Equipment -Door. Body Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32048-38 | LOCK EQUIPMENT | 2 | |
| G32048-41 | Lock Equipment | 5 | |
| G32049-1 | LOCK EQUIPMENT - DOOR, WING LANDING GEAR | 6 | |
| G32050-1 | HOIST EQUIPMENT - RETRACT ACTUATOR, NOSE LANDING GEAR (CE) | 4 | |
| G32053-1 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32054-1 | REMOVAL/INSTALLATION EQUIPMENT - DOORS, WING LANDING GEAR AND BODY LANDING GEAR (CE) | 2 | |
| G32055-1 | OVERHEAD MECHANICAL EQUIPMENT - WING AND BODY LANDING GEAR (CE) | 2 | |
| G32058-1 | REMOVAL/INSTALLATION EQUIPMENT - WING LANDING GEAR AND BODY LANDING GEAR BOGIE PIVOT PIN | 2 | |
| G32059-1 | LOCATING EQUIPMENT -AIR GAP RIGGING TOOL. WING LANDING GEAR | 2 | |
| G32060-1 | HOIST EQUIPMENT - RETRACT ACTUATOR, NOSE LANDING GEAR | 2 | |
| G32063-1 | Puller Equipment -Shear Pin. Bearing Housing. Wing Landing Gear | 3 | |
| G32064-1 | Equipment Remvl/Instl | 2 | |
| G32065-1 | HOIST EQUIPMENT - DRAG STRUT, NOSE LANDING GEAR (CE) | 2 | |
| G32066-1 | Torque Equipment | 3 | |
| G32066-15 | EQUIPMENT - TORQUE, TRUNNION BOLT,BLG AND NLG(G32066-1) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32066-2 | Torque Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32066-90 | TORQUE EQUIPMENT | 2 | |
| G32066-95 | TORQUE EQUIPMENT KIT | 1 | |
| G32066-96 | EQUIPMENT - TORQUE, TRUNNION BOLT, BLG AND NLG | 1 | |
| G32067-1 | SLING EQUIPMENT | 1 | |
| G32069-1 | SLING EQUIPMENT - DOORS, WING LANDING GEAR AND BODY LANDING GEAR | 2 | |
| G32074-1 | RIGGING EQUIPMENT - BODY GEAR DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32074-72 | RIGGING EQUIPMENT - BODY GEAR DOORS | 4 | |
| G32075-1 | TEST EQUIPMENT - BRAKE BLEED PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G32075-16 | TEST EQUIPMENT - BRAKE BLEED PORT | 8 | |
| G32075-16 | TEST EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE C | 8 | |
| G32077-1 | SOCKET EQUIPMENT - BULKHEAD RETENTION NUT, WING LANDING GEAR SHOCK STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G34002-1 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 20 | |
| G34002-2 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 2 | |
| G34002-3 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 4 | |
| G34002-4 | CALIBRATION EQUIPMENT-ANGLE OF ATTACK SENSOR | 1 | |
| G34002-5 | AOA SENSOR CALIBRATION EQUIPMENT | 7 | |
| G34004-11 | ADJUSTMENT EQUIPMENT - WEATHER RADAR ANTENNA MOUNT | 1 | |
| G34004-17 | ADJUSTMENT EQUIPMENT - WEATHER RADAR ANTENNA MOUNT | 7 | |
| G34004-17-M | ADUJUSTMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G35002-1 | RESTRAINING EQUIPMENT | 2 | |
| G35002-5 | RESTRAINING EQUIPMENT - PASSENGER SERVICE UNIT (PSU) OXYGEN DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G35003-1 | RESTRAINING EQUIPMENT - PASSENGER SERVICE UNIT (PSU), OXYGEN DOORS | 6 | |
| G35003-4 | RESTRAINING EQUIPMENT - PASSENGER SERVICE UNIT OXYGEN DOORS | 4 | |
| G36006 | PLUG EQUIPMENT -0 DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-1 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-10 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-11 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-12 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-13 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-14 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-15 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-16 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-2 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-3 | PLUG EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-4 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-5 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-6 | Plug Equipment -Duct Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-7 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-8 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36006-9 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36007 | PLUG EQUIPMENT -0 DUCT TEST PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36007-2 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36008 | PLUG EQUIPMENT -0 DUCT TEST, PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36008-2 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36008-4 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36008-5 | PLUG EQUIPMENT - DUCT TEST, PUROFLEX FLANGES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36008-6 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36009 | PLUG EQUIPMENT -0 DUCT/TUBE PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36009-1 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36009-2 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36009-3 | PLUG EQUIPMENT - DUCT/TUBE PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36010 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B90147 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36010-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B90147 DUCT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36011 | PLUG EQUIPMENT -0 PRESSURE TEST, 69B89711 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36011-1 | PLUG EQUIPMENT - PRESSURE TEST, 69B89711 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36012 | PLUG EQUIPMENT -0 DUCT TEST, 14A466 & 14A469 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36012-1 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36012-2 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36012-3 | PLUG EQUIPMENT - DUCT TEST, 14A466 AND 14A469 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36013 | PLUG EQUIPMENT -0 DUCT TEST, JANITROL 12JOB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36013-1 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36013-3 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36013-5 | PLUG EQUIPMENT - DUCT TEST, JANITROL 12J08 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36013-6 | Plug Equipment -Duct Test. Janitrol 12J08 Flanged Ducts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36014 | PLUG EQUIPMENT -0 DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36014-1 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36014-8 | PLUG EQUIPMENT - DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015 | PLUG EQUIPMENT -0 DUCT TEST (MS33660, TYPE A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-1 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-2 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-3 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-4 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-5 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-6 | PLUG EQUIPMENT - DUCT TEST (MS33660, TYPE A BEAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36015-8 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36016 | PLUG EQUIPMENT -0 DUCT TEST, 14A312 FLANGED DUCT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36016-1 | PLUG EQUIPMENT - DUCT TEST, 14A312 FLANGED DUCTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36017-1 | PLUG EQUIPMENT - PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36019-1 | Plug Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020 | PLUG EQUIPMENT -0 DUCT TEST (20 MACHINED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-18 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-19 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-20 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-21 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-22 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-23 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-24 | Plug Equipment | 1 | |
| G36020-25 | PLUG EQUIPMENT - DUCT TEST (20 DEGREES MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-26 | PLUG EQUIPMENT - DUCT TEST (20 DEGREES MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-27 | Plug Equipment | 1 | |
| G36020-28 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-29 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | 1 | |
| G36020-30 | PLUG EQUIPMENT - DUCT TEST (20 DEGREE MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-31 | PLUG EQUIPMENT - DUCT TEST (20 DEGREES MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-32 | PLUG EQUIPMENT - DUCT TEST (20 DEGREES MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-33 | PLUG EQUIPMENT - DUCT TEST (20 DEGREES MACHINED FLANGES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36020-34 | Plug Equipment -Duct Test (208 Machined Flanges) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36021 | PLUG EQUIPMENT -0 DUCT TEST (65B90154 FLANGE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36021-1 | PLUG EQUIPMENT - DUCT TEST (65B90154 FLANGE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36022 | PLUG EQUIPMENT -0 DUCT PRESSURE TEST (65B94541 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36022-1 | PLUG EQUIPMENT - DUCT PRESSURE TEST (65B94541 DUCT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36024-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36025-1 | PLUG EQUIPMENT - PNEUMATIC DUCT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36026-1 | PLUG EQUIPMENT - PNEUMATIC DUCT, HYDROSTATIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36027 | PLUG EQUIPMENT -0 BOSS, SENSOR MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36027-1 | PLUG EQUIPMENT - BOSS, SENSOR MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36031-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36032-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36033-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36034-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36035-1 | TEST EQUIPMENT - PNEUMATIC SYSTEM HEALTH CHECK | 6 | |
| G36035-1-REP | REPAIR - Pneumatic System Health Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36035-2 | Test Equipment | 1 | |
| G36035-36 | GE & PW FITTINGS BOX - PNEUMATIC SYSTEMHEALTH CHECK TEST EQUIPMENT | 12 | |
| G36035-77 | TEST EQUIPMENT - PNEUMATIC SYSTEM HEALTH CHECK | 7 | |
| G36037-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36038-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36040-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36042-1 | PLUG EQUIPMENT - DUCT, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36044-1 | Removal/Installation Equipment -Precooler (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G36044-217 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER | 5 | |
| G36044-272 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER | 3 | |
| G36045-1 | Test Equipment -Pack Installation. Air Conditioning Pack | 2 | |
| G36049-1 | Test Equipment | 2 | |
| G38002 | PLUG EQUIPMENT -0 DUAL PORTED WASTE WATER DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38002-1 | PLUG EQUIPMENT - DUAL PORTED WASTE WATER DRAIN MAST | 1 | |
| G38002-2 | PLUG EQUIPMENT - DUAL PORTED WASTE WATER DRAIN MAST | 2 | |
| G38004-10 | EQUIPMENT - REMOVAL, VACUUM LAVATORY SYSTEM BLOCKAGE | 12 | |
| G38004-13 | EQUIPMENT | 15 | |
| G38004-17 | EQUIPMENT | 6 | |
| G38005-1 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-111 | TEST CHAMBER EQUIPMENT | 10 | |
| G38005-114 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-115 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 2 | |
| G38005-137 | TEST EQUIPMENT | 2 | |
| G38005-2 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38005-3 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38005-61 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 3 | |
| G38005-87 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL - ADAPTOR EQUIPMENT | 5 | |
| G38006-1 | VACUUM WASTE SYSTEM BLOCKAGE REMOVAL EQUIPMENT | 14 | |
| G38007-13 | REMOVAL/INSTALLATION EQUIPMENT - POTABLE WATER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38007-14 | REMOVAL/INSTALLATION EQUIPMENT - POTABLE WATER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38007-20 | REMOVAL/INSTALLATION EQUIPMENT - POTABLE WATER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38007-23 | REMOVAL/INSTALLATION EQUIPMENT - POTABLE WATER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G38008-1 | PLATFORM EQUIPMENT - WASTE TANK ACCESS, UPPER DECK | 2 | |
| G45001-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45001-100 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45001-101 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45002-1 | Ground Support Equipment (Gse) Kit -Maintenance Laptop (Windows 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45002-10 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45002-11 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | 1 | |
| G45002-20 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45002-25 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45002-29 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | 1 | |
| G45003-1 | GROUND SERVICE EQUIPMENT (GSE) KIT - PORTABLE MAINTENANCE DEVICE - MULTI-PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45003-2 | GROUND SERVICE EQUIPMENT (GSE) KIT - PORTABLE MAINTENANCE DEVICE - MULTI-PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45003-3 | GROUND SERVICE EQUIPMENT (GSE) KIT - PORTABLE MAINTENANCE DEVICE - MULTI-PLATFORM | 1 | |
| G45004 | GROUND SUPPORT EQUIPMENT (GSE) KIT - UNIVERSAL MAINTENANCE DEVICE (UMD) | 1 | |
| G45004-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | 3 | |
| G45004-2 | GROUND SUPPORT EQUIPMENT (GSE) KIT - UNIVERSAL MAINTENANCE DEVICE (UMD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G45004-3 | GROUND SUPPORT EQUIPMENT | 3 | |
| G46001-1 | Breakout Equipment -Onboard Network System (Ons). In-Line | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G47001 | TEST EQUIPMENT -0 LEAK AND PRESSURE, NGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G47001-17 | Test Equipment - Leak & Pressure Nitrogen Gen Sys | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G47001-19 | TEST EQUIPMENT - LEAK AND PRESSURE, NITROGEN GENERATION SYSTEM | 9 | |
| G47001-20 | TEST EQUIPMENT-LEAK AND PRESSURE，NGS | 3 | |
| G47001-7 | Test Equipment-Leak and Pressure, Nitrogen GenerationSystem | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G49003-50 | CRADLE - APU, JACK EQUIPMENT, AF-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G49004 | DOLLY EQUIPMENT -0 AUXILIARY POWER UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G49005-61 | SLING EQUIPMENT - APU (CE) | 1 | |
| G49005-68 | SLING EQUIPMENT - AUXILIARY POWER UNIT (APU) | 2 | |
| G49006 | DISPATCH EQUIPMENT -0 APU REMOVED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G49006-10 | APU Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G49006-17 | DISPATCH EQUIPMENT - APU REMOVED | 3 | |
| G49007 | THREAD PROTECTOR EQUIPMENT | 2 | |
| G49007-1 | THREAD PROTECTOR EQUIPMENT | 5 | |
| G49007-5 | THREAD PROTECTOR EQUIPMENT - APU RETENTION BOLTS | 11 | |
| G49008-1 | SLING EQUIPMENT - APU REAR MOUNT | 5 | |
| G49009 | OVERHEAD MECHANICAL EQUIPMENT SUPPORT - APU EXHAUS | 1 | |
| G49009-1 | Support Equipment -Apu Exhaust Pipe | 5 | |
| G49011-1 | SLING EQUIPMENT APU GENERATOR | 3 | |
| G51001-21 | SKIN WAVINESS TOOL, MEASUREMENT EQUIPMENT - CHECK, SKIN SMOOTHNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G51001-30 | MEASUREMENT EQUIPMENT - CHECK SKIN SMOOTHNESS | 3 | |
| G51002-1 | FALL PROTECTION EQUIPMENT - OVERHEAD PERSONNEL SUPPORT | 3 | |
| G51003-1 | FALL PROTECTION EQUIPMENT - OVERHEAD PERSONNEL SUPPORT | 6 | |
| G51004-1 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| G52004 | FUNCTIONAL TEST EQUIPMENT -0 MANUAL DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52004-1 | FUNCTIONAL TEST EQUIPMENT, SIDE CARGO DOOR MANUAL DRIVE GEARBOX | 1 | |
| G52015-1 | ACCESS FOOR LATCH ACTUATOR TEST EQUIPMENT | 2 | |
| G52015-12 | TEST EQUIPMENT - ACTUATOR, ACCESS DOOR LATCH | 7 | |
| G52015-17 | Test Equipment | 4 | |
| G52018-1 | Drill Jig Equipment -Door Latch Torque Tubes | 1 | |
| G52022 | GAUGE EQUIPMENT - MAIN DOOR LATCH | 1 | |
| G52022-1 | GAUGE EQUIPMENT - MAIN DOOR LATCH | 4 | |
| G52024 | TEST EQUIPMENT-NOSE CARGO DOOR LATCHING SYSTEM | 1 | |
| G52024-1 | TESTEQUIPMENT- NOSE CARGO DOOR LATCHING SYS | 1 | |
| G52024-108 | TESTEQUIPMENT- NOSE CARGO DOOR LATCHING SYS | 3 | |
| G52024-31 | TEST EQUIPMENT - NOSE CARGO DOOR LATCHING SYSTEM | 3 | |
| G52025 | ALIGNMENT EQUIPMENT -0 LATCH FITTINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52025-1 | ALIGNMENT EQUIPMENT - LATCH FITTINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52026-8 | RIGGING EQUIPMENT - OVER ROTATE INDICATION SWITCHES, SWINGZONE DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52027 | ALIGNMENT EQUIPMENT -0 PULL IN HOOKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52027-1 | ALIGNMENT EQUIPMENT - PULL-IN HOOKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52028-1 | RIGGING EQUIPMENT - POSITION RESOLVER, SWINGZONE DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52029-1 | PERSONNEL SAFETY EQUIPMENT - SWINGZONE DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52032-1 | Removal Equipment - Hinge Pins, Main Cargo Door | 1 | |
| G52034-1 | HOSE EQUIPMENT - EXTERNAL HYDRAULIC POWER SUPPLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G52035-1 | SPANNER WRENCH EQUIPMENT | 2 | |
| G52037-1 | OVERHEAD MECHANICAL EQUIPMENT SLING - FORWARD AND AFT CARGO DOORS | 3 | |
| G52038-1 | SLING EQUIPMENT - BULK CARGO DOOR (CE) | 1 | |
| G52038-114 | Sling Equipment -Bulk Cargo Door (Ce) | 1 | |
| G52039-1 | OVERHEAD SLING EQUIPMENT - NOSE CARGO DOOR (CE) | 2 | |
| G52042-1 | BLEED HOSE EQUIPMENT - LATCH PIN ACTUATOR, LARGE CARGO FREIGHTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G53001 | SCAFFOLD EQUIPMENT -0 PRESSURE BULKHEAD ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G53001-103 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G53001-104 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 2 | |
| G53001-104-M | SCAFFOLD EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G53001-134 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-141 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-230 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53001-34 | SCAFFOLD EQUIPMENT - PRESSURE BULKHEAD ACCESS | 1 | |
| G53002-34 | OVERHEAD MECHANICAL EQUIPMENT - SLING, RADOME ASSEMBLY | 4 | |
| G53003-1 | PROTECTIVE EQUIPMENT - SIDEWALL, 4 STEP | 1 | |
| G54007-165 | PRELOAD EQUIPMENT, STRUT INSTALLATION, ENGINE REMOVED (GE AND PW ENGINES) | 6 | |
| G54016-1 | SLING EQUIPMENT - STRUT REMOVAL AND INSTALLATION (CE) | 1 | |
| G54019-1 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G54019-104 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 3 | |
| G54020-1 | SLING EQUIPMENT - STRUT UNLOAD, ENGINE REMOVED (CE) | 1 | |
| G54020-1, -2 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G54020-2 | Sling Equipment -Strut Unload. Engine Removed (Ce) | 2 | |
| G54020-3 | SLING EQUIPMENT - STRUT UNLOAD, ENGINE REMOVED | 1 | |
| G54021-1 | SLING EQUIPMENT - STRUT UNLOAD, ENGINE INSTALLED (CE) | 2 | |
| G54022-1 | Locating Jig Equipment -Hole Centers. Side Link | 1 | |
| G55001-1 | Sling equipment-vertical fin | 2 | |
| G55002-1 | Removal/Installation Equipment -Pivot Pin. Horizontal Stabilizer | 2 | |
| G55M03200400 | TEST EQUIPMENT | 7 | |
| G57001-1 | SAFETY LANYARD EQUIPMENT - HORIZONTAL STABILIZER UPPER SURFACE | 4 | |
| G57002 | SLING EQUIPMENT -0 WINGLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G57002-24 | SLING EQUIPMENT - WINGLET | 7 | |
| G57007-1 | Sling Equipment -Raked Wing Tip Removal/Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G57007-39 | SLING EQUIPMENT - RAKED WING TIP REMOVAL/INSTALLATION | 2 | |
| G57012-1 | SPOTFACE EQUIPMENT - CORROSION REMOVAL, WING BOX S | 3 | |
| G5M5M0-127-0000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 1 | |
| G600-200014-17 | TESTER BONDING EQUIPMENT DIGITAL | 2 | |
| G600-200014-19 | TESTER - BONDING EQUIPMENT (230 V) | 3 | |
| G600-524101-1 | TORQUE WRENCH ADAPTER EQUIPMENT BAY DOOR HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G600−524101−1 | Torque Wrench Adapter − Equipment Bay Door Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G601R270005-1 | SCHOOL EQUIPMENT | 6 | |
| G601R783203-1 | WORKSHOP REVERSE THRUST AIR SOURCE EQUIPMENT | 4 | |
| G698-3140002-101 | DATA LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71001-141 | Bootstrap Equipment CF6-80C2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71001-181 | B747 BOOTSTRAP EQUIPMENT | 15 | |
| G71001-181-INC | Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71003 | BOOTSTRAP EQUIPMENT-PW4000 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71003-204 | EQUIPMENT - BOOTSTRAP, PW4000 ENGINE | 1 | |
| G71003-209 | EQUIPMENT - BOOTSTRAP PW4000 ENGINE | 12 | |
| G71003-209-INC | Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71006-29 | SLING - ENGINE SUPPORT EQUIPMENT, CF6-50 | 2 | |
| G71007-28 | SLING EQUIPMENT - INLET COWL, CF6-80C2B ENGINE | 12 | |
| G71008-1 | PROOF LOAD EQUIPMENT - CRADLE, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-056 | FIXTURE -0 PROOF LOAD, BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-058 | FIXTURE -0 PROOF LOAD, BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-164 | FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT | 1 | |
| G71009-167 | Fixture -Proof Load. Bootstrap Equipment | 1 | |
| G71009-168 | Fixture -Proof Load. Bootstrap Equipment | 1 | |
| G71009-207 | FIXTURE -0 PROOF LOAD, BOOTSTRAP EQUIPMENT | 3 | |
| G71009-22 | FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-229 | Fixture -Proof Load. Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-236 | FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT | 2 | |
| G71009-56 | FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71009-58 | FIXTURE - PROOF LOAD, BOOTSTRAP EQUIPMENT | 1 | |
| G71010-79-MP | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71010-81-MP | HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71018-1 | SUPPORT EQUIPMENT - RB211-524 ENGINE H2 HANDLING ATTACHMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71019 | HOIST EQUIPMENT -0 BOOTSTRAP, RB211-524 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71019-28 | HOIST EQUIPMENT - BOOTSTRAP, RB211-524 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71021-13 | EXTENSION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71022-1 | HOLD OPEN EQUIPMENT | 3 | |
| G71022-54 | HOLD OPEN EQUIPMENT - ENGINE FAN/CORE COWL, CF6-80C2B | 8 | |
| G71023-52 | EQUIPMENT - HOLD-OPEN, FAN AND CORE COWLS | 8 | |
| G71024 | ADAPTER EQUIPMENT -0 FAN THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71024-1 | ADAPTER EQUIPMENT - FAN THRUST REVERSER ACTUATOR BACKLASH TEST, JT9D ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71025-39 | SLING EQUIPMENT - RB211-524 ENGINE | 4 | |
| G71027-1 | SLING EQUIPMENT - JT9D, PW4000 AND CF6-50 ENGINES (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71027-45 | SLING EQUIPMENT - JT9D, PW4000 AND CF6-50 ENGINES (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71028 | BOOT STRAP EQUIPMENT | 1 | |
| G71028-1-M | BOOTSTRAP EQUIPMENT -0 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71028-82 | BOOTSTRAP EQUIPMENT | 2 | |
| G71028-83 | BOOTSTRAP EQUIPMENT - CF6-50 ENGINE | 2 | |
| G71028-84 | BOOTSTRAP EQUIPMENT - CF6-50 ENGINE | 1 | |
| G71029 | BOOTSTRAP EQUIPMENT -0 RB211 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71029-90 | BOOTSTRAP EQUIPMENT - RB211 ENGINE (CE) | 8 | |
| G71030-1 | Sling Equipment -Nose Cowl. Rb211-524 And Cf6-50 Engines | 9 | |
| G71030-2 | SLING EQUIPMENT | 2 | |
| G71031-65 | BOOTSTRAP EQUIPMENT – JT9D-3 AND -7 ENGINES | 3 | |
| G71032-1 | SLING EQUIPMENT - INLET COWL, CF6-50 AND RB211-524 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71033-1 | SLING EQUIPMENT - RB211 | 1 | |
| G71033-2 | SLING EQUIPMENT - RB211 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035 | KIT -0 BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-1 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-2 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-3 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-4 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-5 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71035-6 | KIT - BOOTSTRAP EQUIPMENT, JT9D POWERPLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71036-1 | RIGGING EQUIPMENT - LINEAR POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71037-106 | Bootstrap Equipment - Engine Change Kit -Genx-2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71038-1 | UNLOCK POLE EQUIPMENT - FAN COWL HOLD OPEN ROD | 3 | |
| G71038-13 | UNLOCK POLE EQUIPMENT -FAN COWL HOLD OPEN ROD | 7 | |
| G71038-17 | UNLOCK POLE EQUIPMENT - FAN COWL HOLD OPEN ROD | 4 | |
| G71039-1 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71039-44 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71040-1 | TRANSPORTATION EQUIPMENT - ENGINE MOUNT STABILIZATION | 3 | |
| G71042-1 | HOIST EQUIPMENT -ENGINE MOUNTS AND THRUST LINKS (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71042-41 | HOIST EQUIPMENT - ENGINE MOUNTS AND THRUST LINKS | 3 | |
| G71043-1 | SLING EQUIPMENT - FAN COWL (CE) | 5 | |
| G71044-1 | SLING EQUIPMENT - FAN COWL SUPPORT BEAM | 4 | |
| G71047-1 | Locating Jig Equipment -Engine Buildup. Genx-2B | 1 | |
| G71048-1 | THREAD PROTECTOR EQUIPMENT - ENGINE MOUNT AND THRUST LINK BOLTS | 8 | |
| G71049-1 | Cover Equipment -Fwd/Aft Fan Case. Rfi Configuration Genx-2B | 2 | |
| G78002-1 | HOLD OPEN EQUIPMENT | 13 | |
| G78003-53 | SLING EQUIPMENT - FAN REVERSER, CF6-80C2B ENGINE | 13 | |
| G78004 | INSTALLATION/REMOVAL EQUIPMENT -0 OVERSIZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78004-1 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78004-12 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78004-13 | INSTALLATION/REMOVAL EQUIPMENT - OVERSIZE BEARING | 1 | |
| G78005-10 | Adapter Equipment -Thrust Reverser Hold Open Rod | 9 | |
| G78007-1 | Sling Equipment -Removal/Installation Fan Reverser Sleeve. Genx-2B (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78007-71 | SLING EQUIPMENT - REM/INSTL FAN REVERSER SLEEVE, GENX-2B | 5 | |
| G78009-1 | Gage Equipment | 8 | |
| GEC 1010-400 | WEIGHT AND BALANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GEC5D-10000-5 | LOAD CELLS FOR A/C WEIGHT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GEGC995-0001-85 | KIT - LOOSE EQUIPMENT | 1 | |
| GEKKO 64:64 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GFD165 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GFD306 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GPSG1000 | GPS Test Equipment | 4 | |
| GS15848-1 | GROUND SUPPORT EQUIPMENT | 8 | |
| GS20842-1 | Propeller Hub Pressurizing Equipment | 14 | |
| GS23413-1 | ADAPTER SET,GROUND HANDLING EQUIPMENT | 16 | |
| GSE 55918 | Lifting equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE2820514 | FUEL TANK LEAK TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE313-190 | DATA ACQUISITION GAGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55918 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55922 | HOIST EQUIPMENT, BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55944 | EQUIPMENT -LIFTING, WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55946 | Lifting equipment, bogie trim actuator | 1 | |
| GSE55948 | HOIST - EQUIPMENT, WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55948102 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55948103 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55948104 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55948105 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55948106 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE55951 | Lifting equipment | 1 | |
| GSE56042 | HOIST - EQUIPMENT, WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56043 | HOIST - EQUIPMENT, WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE56076 | HOIST - EQUIPMENT, BLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GTF-1 | CAPACITANCE MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GTF-1 OF TF-20 | CAPACITANCE MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GTS500 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H-6800 | CASE EQUIPMENT 1200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H1B | BALANCING EQUIPMENT WITH DIGITAL ANALYZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H2-835 | DEFECTOMTER, EDDY CURRENT EQUIPMENT | 6 | |
| H2-836 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 1 | |
| HC130H0091-000 | WHEEL BASE MEASURING EQUIPMENT | 1 | |
| HC130H0179-000 | Flap ScrewJack Backlash Check Equipment | 3 | |
| HC131H0036-000 | Flap Neutral Checking Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HC131H0044-000 | "FLYING CONTROL FRICTION AND BREAKOUT EQUIPMENT " | 3 | |
| HC131H0077-000 | SETTING EQUIPMENT | 4 | |
| HC132H0000-000 | LIFTING EQUIPMENT | 1 | |
| HC132H0001-000 | NLG LIFTING EQUIPMENT | 3 | |
| HC132H0174-000 | I.D.G. Handling Equipment 502 Eng | 2 | |
| HC132H0174-008 | I.D.G. HANDLING EQUIPMENT | 1 | |
| HC132J0010-002 | Air Conditioning PAC Lifting Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HC600-1P5 | BIOCIDE METER EQUIPMENT | 2 | |
| HC600-1P7 | BIOCIDE METERING INJECTION EQUIPMENT, PN NOT FIND | 3 | |
| HCS8806 | MICRO BONDER HOT BOND EQUIPMENT | 1 | |
| HDA200 | TIG WELDING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HDL3000 | LEAK DETECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HFK-02 | RAT TEST EQUIPMENT | 7 | |
| HFK02 | Test equipment | 7 | |
| HLY915909 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HLY917428 | HOIST-EQUIPMENT,APU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HM04650212LH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HM04650212RH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HMO4650212LH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HMO4650212RH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HOCKING PHASEC 2200 | NDT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HOSE KIT-2 | HOSE FOR PITOT STATIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HOTWINDS | INFRARED EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HPG1 | TEST AND SUPPORT EQUIPMENT | 1 | |
| HRK-01 | RATTEST RAT TEST EQUIPMENT | 2 | |
| HRK-02 | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 1 | |
| HRK01 | RATTEST RAT TEST EQUIPMENT | 2 | |
| HRK02 | Hycom HRK-02 RAT Ground Test Equipment Kit | 1 | |
| HRT-01 | RAT TEST EQUIPMENT | 8 | |
| HRT01 | RAT TEST EQUIPMENT | 8 | |
| HS7597 | DOME LIFTING EQUIPMENT | 3 | |
| HTE22487 | MOUNTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HTT-02 | EQUIPMENT - HYDRAULIC LEAKAGE CHECK | 2 | |
| HTT-02-90-3036 | SCISSOR LIFT TABLE HYDRAULIC EQUIPMENT | 1 | |
| HTT02 | HYDRAULIC EQUIPMENT | 2 | |
| HU51264 | Hoisting Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU55083-5 | HOISTING EQUIPMENT | 9 | |
| HU55864 | HOISTING EQUIPMENT- TROLLEY LONG REACH GEARBOX | 2 | |
| HU56545-2 | Hoisting Equipment | 2 | |
| IAE1J2004 | EQUIPMENT - FAN BLADE PUSH/PULL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2RI9427 A | EDDY CURRENT INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE6F10056 | EQUIPMENT, BORESCOPE | 2 | |
| IAE6F10408 | EQUIPMENT-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ID5079 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IFR 4000 | COM-1613 TRANSMITTER TESTER-SELCAL.GROUND EQUIPMENT | 31 | |
| IFR 4000-220 | VOR/ILS RAMP TEST EQUIPMENT | 1 | |
| IFR 6000 | 437_ATC601 (TEST EQUIPMENT) | 27 | |
| IFR-4000 | NAVIGATION EQUIPMENT TEST | 31 | |
| IFR6000 | RAMP TEST EQUIPMENT | 27 | |
| IFR60000PT3 | ATC/DME/TCAS TEST EQUIPMENT | 5 | |
| IPLEX NX | BORESCOPE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IRIS 2000 | Automatic Test Equipment System | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IS0V0LT100 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IV7635X1 | OPTICAL (VIDEO) CABLE - 6MM - BORESCOPE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IV8635-2 | BOROSCOPE EQUIPMENT (6MM SCOPE UNIT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Illustrated Tool & Equipment Manual Cessna CJ2 and CJ2+ | Illustrated Tool & Equipment Manual Cessna CJ2 and CJ2+ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J-FD01.16 | PORTABLE LUBRICATING OIL REFUELING EQUIPMENT (LUBRICATING OIL GROUND REFUELING COMPONENTS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J0700-25 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07004-13 | Jack NLG Emergency Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07004-15 | Jack NLG Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07004-23 | JACKING EQUIPMENT NLG | 2 | |
| J07004-59 | EMERGENCY JACKING EQUIPMENT - NOSE LANDING GEAR | 8 | |
| J07005-33-M | JACKING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07005-52 | JACKING EQUIPMENT - | 4 | |
| J07008-1 | SLING EQUIPMENT - TETHERING/LIFTING AIRPLANE RECOVERY | 1 | |
| J07008-22 | SLING EQUIPMENT - TETHERING / LIFTING AIRPLANE REC | 2 | |
| J07008-30 | SLING EQUIPMENT - TETHERING/LIFTING AIRPLANE RECOVERY | 5 | |
| J07008-46 | SLING EQUIPMENT - TETHERING/LIFTING AIRPLANE RECOVERY | 1 | |
| J07009-1 | Jack Equipment MLG Axle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07010-1 | HOIST EQUIPMENT - AIRPLANE RECOVERY, WITH MAIN LANDING GEAR (CE) | 1 | |
| J07010-13 | HOIST EQUIPMENT - AIRPLANE RECOVERY, WITH MAIN LANDING GEAR | 1 | |
| J07011-1 | HOIST EQUIPMENT - AIRPLANE RECOVERY, WITHOUT MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07011-2 | HOIST EQUIPMENT - AIRPLANE RECOVERY, WITHOUT MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07012-26 | PROOF LOAD EQUIPMENT - HOIST EQUIPMENT, AIRPLANE RECOVERY | 1 | |
| J07012-27 | PROOF LOAD EQUIPMENT - HOIST EQUIPMENT, AIRPLANE RECOVERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07012-39 | PROOF LOAD EQUIPMENT - HOIST EQUIPMENT, AIRPLANE RECOVERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J07013 | JACKING EQUIPMENT - MAIN LANDING GEAR (EMERGENCY CONDITION) | 1 | |
| J07013-1 | EQUIPMENT - JACKING, MAIN LANDING GEAR AXLE (EMERGENCY CONDITIONS) | 9 | |
| J07014-1 | Proof Loading Equipment -Axle Jacking Equipment | 1 | |
| J10003-8 | Tethering Equipment -Engine Pylon. Airplane Recovery | 1 | |
| J10006 | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10006-EXHAUST NOZZLE | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10006-INLET COVER | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10006-T/R PLUG | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10007-1 | WEIGHT EQUIPMENT - DUMMY ENGINE | 1 | |
| J10007-2 | WEIGHT EQUIPMENT - DUMMY ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-3 | WEIGHT EQUIPMENT - DUMMY ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-4 | WEIGHT EQUIPMENT - DUMMY ENGINE | 1 | |
| J10007-5 | WEIGHT EQUIPMENT - DUMMY ENGINE (CE) | 3 | |
| J10007-53 | WEIGHT EQUIPMENT - DUMMY ENGINE (CE) | 1 | |
| J10007-54 | WEIGHT EQUIPMENT - DUMMY ENGINE (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-55 | WEIGHT EQUIPMENT - DUMMY ENGINE (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-56 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 CF6-80C2) | 1 | |
| J10007-57 | WEIGHT EQUIPMENT - DUMMY ENGINE | 1 | |
| J10007-58 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 RB211) | 1 | |
| J10007-59 | Weight Equipment - Dummy Engine CE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-60 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT | 2 | |
| J10007-99 | WEIGHT EQUIPMENT - DUMMY ENGINE | 1 | |
| J12001-20 | Ladder - Access, Forward Electrical Equipment Bay Door (Access Door 112AL) | 3 | |
| J2000-63 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT (LRU),MAIN ELECTRICAL/ELECTRONIC (EE) BAY | 2 | |
| J20001 | HOIST EQUIPMENT-LRU`S,MAIN EE BAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20001-1 | HOIST EQUIPMENT | 7 | |
| J20001-40 | Hoist Equipment -Line Replaceable Unit (Lru). Main Electrical/Electronic (Ee) Bay | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20001-52 | Hoist Equipment -Line Replaceable Unit (Lru). Main Electrical/Electronic (Ee) Bay | 3 | |
| J20001-53 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT (LRU), MAIN ELECTRICAL/ELECTRONIC (EE) BAY | 2 | |
| J20001-60 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT (LRU), MAIN ELECTRICAL/ELECTRONIC (EE) BAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20001-61 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20001-62 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT LRU | 4 | |
| J20001-63 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT LRU | 4 | |
| J20001-64 | HOIST EQUIPMENT - LINE REPLACEABLE UNIT (LRU), MAIN ELECTRICAL/ELECTRONIC (EE) BAY | 1 | |
| J20004-1 | SAFETY HARNESS ATTACHMENT EQUIPMENT | 5 | |
| J20004-8 | EQUIPMENT - PERSONNEL SAFETY, HORIZONTAL STABILIZER | 5 | |
| J20005-1 | PERSONAL EQUIPMENT - SHOCK ABSORBING LANYARD, UPPER WING | 4 | |
| J20005-17 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, UPP | 5 | |
| J20006-1 | LANYARD PERSONNEL SAFETY EQUIPMENT | 3 | |
| J20006-2 | PERSONNEL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20006-24 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, ENGINE/STRUT | 8 | |
| J20006-3 | Personnel Equipment -Shock Absorbing Lanyard. Engine/ Strut | 2 | |
| J20006-7 | Safety Equipment | 1 | |
| J20009 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 2 | |
| J20009-108 | JACKING EQUIPMENT- H | 5 | |
| J20009-109 | "JACKING EQUIPMENT - HYDRAULIC TELESCOPING (CE) | 8 | |
| J20009-110 | Jacking Equipment - Hydraulic Telescoping | 11 | |
| J20009-136 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 8 | |
| J20009-140 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 2 | |
| J20009-38 | Hydraulic Jacking Equipment | 3 | |
| J20009-50 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 12 | |
| J20009-50. | JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 12 | |
| J20009-64 | JACKING EQUIPMENT - | 5 | |
| J20009-68 | EQUIPMENT JACKING | 14 | |
| J20009-70 | JACKING EQUIPMENT - HYDRAULIC TELESCOPING767 | 5 | |
| J20009-88 | Cradle Adapter - Jacking Equipment | 7 | |
| J21001 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 1 | |
| J21001-132 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK C | 7 | |
| J21001-133 | Hoist Adapter Equipment ( Combination Of -132/-79 & - 134/-81) | 5 | |
| J21001-134 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK C | 6 | |
| J21001-154 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK C | 4 | |
| J21001-3 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 2 | |
| J21001-72 | Hoist Adapter Equipment -Air Conditioning Pack | 1 | |
| J21001-73 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-79 | Hoist Adapter Equipment | 4 | |
| J21001-80 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 6 | |
| J21001-81 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT PAC | 6 | |
| J21003-1 | Maintenance Platform Equipment - Wide | 12 | |
| J21003-2 | Maintenance Platform Equipment - Narrow | 2 | |
| J21003-23 | MAINTENANCE PLATFORM EQUIPMENT | 3 | |
| J21003-24 | MAINTENANCE PLATFORM EQUIPMENT | 1 | |
| J21007-1 | Adapter Equipment | 2 | |
| J21007-26 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 4 | |
| J21007-31 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J21008-1 | DISPATCH EQUIPMENT - COVER PLATE RAM AIR INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J21008-7 | DISPATCH EQUIPMENT - COVER PLATE, RAM AIR INLET | 7 | |
| J22003-1 | RIGGING EQUIPMENT - AUTOTHROTTLE AND RUDDER BRAKE | 2 | |
| J22003-1E | RIGGING EQUIPMENT - AUTOTHROTTLE AND RUDDER BRAK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J22004-1 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J22004-156 | TEST EQUIPMENT - AUTOTHROTTLE, GEARBOX, BRAKE | 1 | |
| J22004-157 | TEST EQUIPMENT, AUTOTHROTTLE, GEARBOX, BRAKE (60HZ, 110VAC) | 1 | |
| J22004-176 | TEST EQUIPMENT - AUTOTHROTTLE, GEARBOX, BRAKE | 1 | |
| J22004-177 | TEST EQUIPMENT - AUT | 2 | |
| J22004-2 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J22004-55 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J22004-67 | Test Equipment - Autothrottle, Gearbox, Brake | 1 | |
| J22004-68 | TEST EQUIPMENT AUTOTHROTTLE GEARBOX BRAKE | 1 | |
| J23002-1 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE | 4 | |
| J23002-16 | EQUIPMENT-ADAPTOR CR | 7 | |
| J237006-43 | SLING EQUIPMENT - OUTBOARD TRAILING EDGE FLAP | 1 | |
| J24004 | Despatch Equipment - PW4082 IDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J24005-1 | HOIST EQUIPMENT - APU BATTERY (CE) | 13 | |
| J24014-24 | GFCI Tester Equipment | 6 | |
| J24015-1 | TEST EQUIPMENT- ENGINE GENERATOR PRESSURE | 10 | |
| J24015-2 | PRESSURE TEST EQUIPMENT - ENGINE GENERATORS (VSCF/BUG INSTALLED) | 4 | |
| J24015-23 | TEST EQUIPMENT- ENGINE GENERATOR PRESSURE | 4 | |
| J24015-3 | PRESSURE TEST EQUIPMENT - ENGINE GENERATORS (VSCF ON BENCH) | 2 | |
| J24017-1 | Removal/Instl Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25003 | TEST EQUIPMENT - LATERAL GUIDE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25003-34 | TEST EQUIPMENT - LATERAL GUIDE ASSEMBLY | 1 | |
| J25003-35 | TEST EQUIPMENT - LATERAL GUIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25004-23 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25005-1 | REM/INST EQUIPMENT - OFF WING ESCAPE BOTTLE | 6 | |
| J25006-1 | INSTALLATION/REMOVAL EQUIPMENT - OFF WING ESCAPE S | 3 | |
| J25006-20 | INSTALLATION/REMOVAL EQUIPMENT - OFF WING ESCAPE SLIDE (CE) | 5 | |
| J25010-1 | DOLLY EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR)/ OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 3 | |
| J25010-95 | DOLLY EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR)/ OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 4 | |
| J25011-1 | Adapter Equipment -Overhead Flight Attendant Rest (Ofar) / Overhead Flight Crew Rest (Ofcr) Module Removal / Installation | 2 | |
| J25011-64 | Adapter Equipment | 3 | |
| J25011-68 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 4 | |
| J25013-1 | Hoisting Equipment -Upper Vestibule Module Removal/ Installation | 1 | |
| J25013-46 | HOISTING EQUIPMENT - UPPER VESTIBULE MODULE REMOVA | 3 | |
| J25013-47 | HOISTING EQUIPMENT - UPPER VESTIBULE MODULE REMOVAL/ INSTALLATION | 2 | |
| J25013-67 | EQUIPMENT - HOIST, UPPER VESTIBULE MODULE REM/INSTLN | 2 | |
| J25015-1 | Cart Equipment -Passenger Seats (Ce) | 2 | |
| J25015-195 | CART EQUIPMENT - PASSENGER SEATS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25015-241 | CART EQUIPMENT - PASSENGER SEATS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J25015-373 | CART EQUIPMENT - PASSENGER SEATS | 4 | |
| J26001-17 | R&I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J26002-1 | EXTENDER CARD - ELECTRICAL/ELECTRONIC EQUIPMENT | 5 | |
| J26002-2 | EXTENDER CARD - ELECTRICAL/ELECTRONIC EQUIPMENT | 4 | |
| J26002-3 | EXTENDER CARD - E/E EQUIPMENT USED ON THE OVERHEAD PANEL CARD FILES, LOCATED ON THE P61 OVERHEAD PANEL. | 4 | |
| J26004-24 | TEST EQUIPMENT - SQUIB, FIRE EXTINGUISHING SYSTEM | 10 | |
| J26004-25 | Test Equipment -Squib. Fire Extinguishing System | 10 | |
| J26004-26 | TEST EQUIPMENT - SQUIB, FIRE EXTINGUISHING SYSTEM | 9 | |
| J26004-27 | Test Equipment -Squib. Fire Extinguishing System | 7 | |
| J26004-28 | TEST EQUIPMENT - SQUIB, FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J26004-49 | TEST EQUIPMENT - SQUIB, FIRE EXTINGUISHING SYSTEM | 6 | |
| J26004-53 | Cable Assembly - Test Equipment - Squib Fire Extin | 6 | |
| J26004-54 | TEST EQUIPMENT - SQUIB, FIRE EXTINGUISHING SYSTEM | 7 | |
| J26005 | TEST EQUIPMENT-FIRE EXT TUBING,CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J26005-1 | TEST EQUIPMENT - FIR | 4 | |
| J26005-19 | TEST EQUIPMENT - FIRE EXTINGUISHER TUBING, CARGO COMPARTMENT | 1 | |
| J26005-24 | TEST EQUIPMENT - FIRE EXTINGUISHER TUBING, CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J26005-32 | TEST EQUIPMENT - FIRE EXTINGUISHER TUBING, CARGO COMPARTMENT | 3 | |
| J26006-1 | CONTROLLER EQUIPMENT - POWER SUPPLY, ELECTRICAL/ E | 8 | |
| J26006-32 | CONTROLLER EQUIPMENT - POWER SUPPLY, ELECTRICAL/ELECTRONIC COOLING FANS | 7 | |
| J26008-1 | TEST EQUIPMENT ENGINE FIRE EXTINGUISHER | 6 | |
| J26008-2 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 2 | |
| J26008-3 | Test Equipment -Engine Fire Extinguishing System | 7 | |
| J26008-35 | TEST EQUIPMENT ENGINE FIRE EXTINGUISHER | 11 | |
| J26009-1 | Test Equipment -Fire Extinguisher Tubing. Cargo Compartment | 3 | |
| J26009-16 | TEST EQUIPMENT - FIRE EXTINGUISHING TUBING, CARGO | 6 | |
| J27002-1 | LOCK EQUIPMENT, HORIZONTAL STABILIZER ACTUATOR BALL NUT | 11 | |
| J27003-1 | Adapter Equipment | 9 | |
| J27004-1 | Removal/Installation Equipment -Slat Power Drive Unit | 6 | |
| J27004-24 | Equipment - Removal/Installation, L.E. Slat Power Drive Unit | 3 | |
| J27005-33 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 6 | |
| J27005-35 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-48 | Lock Equipment | 9 | |
| J27005-63 | LOCK EQUIPMENT - INBOARD/OUTBOARD, SPOILER ACTUATOR | 1 | |
| J27005-64 | EQUIPMENT - LOCK, INBOARD AND OUTBOARD SPOILER ACTUATORS | 4 | |
| J2700533 | LOCK EQUIPMENT - INBOARD / OUTBOARD | 6 | |
| J27006-18 | SLING EQUIPMENT - OU | 3 | |
| J27006-20 | SLING, EQUIPMENT O/B T/E | 6 | |
| J27006-30 | Sling Equipment Otbd Trailing | 1 | |
| J27006-43 | SLING EQUIPMENT - OUTBOARD TRAILING EDGE FLAP (CE) | 7 | |
| J27007-1 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27007-15 | EQUIPMENT - HOIST, HORIZONTAL STABILIZER TRIM ACTUATOR | 3 | |
| J27007-7 | Hoist Equipment -Horizontal Stabilizer Trim Actuator | 7 | |
| J27008-1 | SLING EQUIPMENT AILERON | 6 | |
| J27011-1 | SLING EQUIPMENT - IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27011-23 | SPL-1701 EQUIPMENT | 4 | |
| J27011-39 | SLING EQUIPMENT - INBOARD TRAILING EDGE FLAP | 6 | |
| J27012-23 | EQUIPMENT SLING INBOARD T.E FLAP | 1 | |
| J27013-20 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 5 | |
| J27013-27 | Equipment - Sling, Elevator Removal/Installation | 6 | |
| J27014-1 | SLING EQUIPMENT - SL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27014-19 | EQUIPMENT - SLING, INBOARD/OUTBOARD LE SLAT | 10 | |
| J27016-46 | Equipment - Removal/Installation, Elevator Power Control Unit (Requires 2 Customer Furnished Fishpole Hoists) | 12 | |
| J27017-1 | RIGGING EQUIPMENT - FLAPERON | 3 | |
| J27017-19 | Equipment Rigging Flaperon | 10 | |
| J27020-1 | RIGGING EQUIPMENT FLAPS | 9 | |
| J27023-1 | REMOVAL / INSTALLATION EQUIPMENT - T.E. FLAP | 3 | |
| J27023-26 | EQUIPMENT - REMOVAL/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27023-33 | REMOVAL/INSTALLATION EQUIPMENT - TRANSMISSION,TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27023-54 | REMOVAL/INSTALLATION EQUIPMENT - TRANSMISSION, TRA | 4 | |
| J27024-1 | SLING EQUIPMENT - RU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27024-2 | SLING EQUIPMENT - RU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27024-38 | Sling Equipment - Rudder (Hoist Incl'd) | 1 | |
| J27024-39 | Sling Equipment - Rudder (Hoist Excl'd) | 3 | |
| J27024-47 | Sling Equipment -Rudder. Removal/Installation (Ce) | 2 | |
| J27024-48 | SLING EQUIPMENT | 1 | |
| J27024-65 | Sling Equipment - Rudder Removal Installation | 5 | |
| J27024-66 | SLING EQUIPMENT - RUDDER, REMOVAL/INSTALLATION (CE) | 5 | |
| J27026-32 | Restraint Equipment - Inboard Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27026-49 | RESTRAINT EQUIPMENT - INBOARD FLAP, AFT TO MAIN SEGMENT | 5 | |
| J27026-50 | EQUIPMENT RESTRAIN,AFT TO MAIN SEGMENT INBOARD FLAP. | 8 | |
| J27027-1 | Hoist Equipment -Removal/Installation. Rudder Power Control Unit | 6 | |
| J27027-129 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 1 | |
| J27027-130 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 3 | |
| J27027-52 | HOIST EQUIPMENT | 9 | |
| J27030-1 | RIGGING EQUIPMENT - L.E. SLAT INSTALLATION | 1 | |
| J27030-29 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 8 | |
| J27035 | LOCK EQUIPMENT - FLAP WITH TRANSMISSIONS REMOVED | 1 | |
| J27035-1 | Lock Equipment -Flap With Transmissions Removed | 2 | |
| J27035-40 | LOCK EQUIPMENT - FLA | 3 | |
| J27035-41 | Lock Equipment -Flap With Transmissions Removed | 2 | |
| J27035-52 | LOCK EQUIPMENT - FLA | 2 | |
| J27035-55 | LOCK EQUIPMENT - FLAP WITH TRANSMISSIONS REMOVED | 5 | |
| J27035-57 | LOCK EQUIPMENT - FLAP WITH TRANSMISSIONS REMOVED | 1 | |
| J27035-58 | LOCK EQUIPMENT - FLAP WITH TRANSMISSIONS REMOVED | 1 | |
| J27035-59 | LOCK EQUIPMENT - FLAP WITH TRANSMISSIONS REMOVED | 6 | |
| J27043-1 | CLAMP EQUIPMENT - DRIVE SHAFT, T.E. FLAP | 3 | |
| J27043-18 | CLAMP EQUIPMENT - DRIVE SHAFT, TRAILING EDGE FLAP | 11 | |
| J27045-1 | SUPPORT EQUIPMENT - | 9 | |
| J27045-2 | Support Equipment - Flaperon Less Box | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27046-1 | Clamp Equipment-LE Slat Drive Shaft | 13 | |
| J270461 | CLAMP EQUIPMENT - L.E SLAT DRIVE SHAFT | 13 | |
| J27048-1 | REMOVAL/INSTALLATION EQUIPMENT - NO. 3 AND NO. 6 FLAP FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27048-14 | REMOVAL/INSTALLATION EQUIPMENT - NO. 3 AND NO. 6 F | 7 | |
| J27053-1 | TEST EQUIPMENT - LEA | 1 | |
| J27053-30 | TEST EQUIPMENT - LEADING EDGE ROTARY ACTUATORS | 1 | |
| J27054-1 | Test Equipment-Leakage Test | 3 | |
| J27054-27 | TEST EQUIPMENT - LEAKAGE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27054-34 | TEST EQUIPMENT - LEAKAGE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27055-1 | AXIAL LOAD EQUIPMENT | 1 | |
| J27055-17 | Axial Load Equipment -Flap Actuation Torque Brake | 1 | |
| J27056-129 | Test Equipment - Run-In, Variable Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27056-130 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27056-155 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | 1 | |
| J27056-156 | Test Equipment -Run-In. Variable Drive | 2 | |
| J27056-43 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | 1 | |
| J27056-44 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | 1 | |
| J27056-45 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | 1 | |
| J27056-46 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27056-71 | TEST EQUIPMENT - RUN-IN, VARIABLE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27056-72 | Test Equipment - Run-In, Variable Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27057-21 | MEASUREMENT EQUIPMENT - BEARING WIDTH | 1 | |
| J27057-22 | MEASUREMENT EQUIPMENT - BEARING WIDTH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27057-29 | Measurement Equipment - Bearing Width | 2 | |
| J27059-38 | Check Fixture Equipment -Backlash. Le Slat Angle Gearboxes | 1 | |
| J27060-1 | TEST EQUIPMENT - SLAT AND OFFSET GEARBOX | 1 | |
| J27060-56 | TEST EQUIPMENT - SLAT AND OFFSET GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27060-96 | TEST EQUIPMENT - SLAT AND OFFSET GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27061-1 | OVERHAUL EQUIPMENT - | 4 | |
| J27062-1 | OVERHAUL EQUIPMENT - SPRING STACK, FLAP ACTUATION TRANSMISSION | 2 | |
| J27063-1 | Test Equipment - Torque Brake | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27063-44 | TEST EQUIPMENT - TORQUE BRAKE | 2 | |
| J27064-1 | TEST EQUIPMENT - FORWARD QUADRANT ASSEMBLY, PITCH TRIM | 2 | |
| J27065-1 | TEST EQUIPMENT - POWER DRIVE UNIT, FLAP | 1 | |
| J27066-1 | ADAPTER EQUIPMENT - TEST FIXTURE, STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27067-108 | ASSEMBLY/DISASSEMBLY EQUIPMENT - FLAP ACTUATION TRANSMISSIONS | 4 | |
| J27067-109 | BACKLASH EQUIPMENT | 1 | |
| J27067-110 | BACKLASH EQUIPMENT | 1 | |
| J27067-111 | BACKLASH EQUIPMENT | 1 | |
| J27067-112 | BACKLASH EQUIPMENT | 1 | |
| J27068-33 | TEST EQUIPMENT - TRAILING EDGE FLAP ACTUATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27068-83 | TEST EQUIPMENT - TRI | 1 | |
| J27069-1 | BACKLASH CHECK EQUIPMENT - OFFSET GEARBOX, LEADING EDGE SLAT ACTUATION | 1 | |
| J27070-1 | Fixture Equipment -Assembly. Stabilizer Trim Actuator | 4 | |
| J27070-61 | FIXTURE EQUIPMENT - ASSEMBLY, STABILIZER TRIM ACTUATOR | 1 | |
| J27071-1 | OVERHUAL EQUIPMENT - | 2 | |
| J27073-1 | TEST EQUIPMENT - ELE | 2 | |
| J27073-275 | TEST EQUIPMENT - ELEVATOR FEEL UNIT, LATERAL AND RUDDER CONTROLS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27075-1 | ASSEMBLY / DISASSEMBLY EQUIPMENT - SLAT SKEW/LOSS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27075-32 | ASSEMBLY/DISASSEMBLY EQUIPMENT - SLAT SKEW/LOSS MECHANISM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27076-11 | Test Equipment | 9 | |
| J27078-1 | DRIVE ADAPTER EQUIPMENT, HORIZONTAL STABILIZER TRIM ACTUATOR | 10 | |
| J27078-38 | ELEVATOR FREEPLAY INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27079 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | 1 | |
| J27079-1 | INSPECTION EQUIPMENT | 3 | |
| J27079-31 | INSPECTION EQUIPMENT | 5 | |
| J27079-32 | INSPECTION EQUIPMENT, ELEVATOR FREEPLAY | 3 | |
| J27079-32(~?) | INSPECTION EQUIPMENT -0 ELEVATOR FREEPLAY | 3 | |
| J27079-38 | INSPECTION EQUIPMENT-ELEVATOR FREEPLAY (TEST TOOL) | 11 | |
| J27079-38 | INSPECTION EQUIPMENT - ELEVATOR FREE PLAY | 11 | |
| J27079-57 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY, B767 | 6 | |
| J27081-1 | Rigging Equipment-Outbd Trail | 6 | |
| J27084-1 | TEST EQUIPMENT - T.E. FLAP TRANSMISSION, NO-BACK BRAKE OPERATIONAL TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27084-72 | TEST EQUIPMENT - T.E. FLAP TRANSMISSION, NO-BACK BRAKE OPERATIONAL TEST | 3 | |
| J27084-79 | TEST EQUIPMENT - T.E. FLAP TRANSMISSION, | 4 | |
| J27084-79 | TEST EQUIPMENT | 4 | |
| J27101-1 | Sling Equipment | 1 | |
| J27103-1 | Sling Equipment | 1 | |
| J27105-1 | Slat Rigging Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J27152-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28001-1 | FITTING EQUIPMENT - FUEL DRAIN SUMP | 4 | |
| J28005-1 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD | 2 | |
| J28005-2 | TEST - EQUIPMENT - E | 2 | |
| J28005-30 | Test Equipment | 2 | |
| J28007 | Pressurization Equipment - Wing Dry Bay, Fuel Leak | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28007-1 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 1 | |
| J28007-10 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 1 | |
| J28007-11 | RESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 4 | |
| J28007-9 | PRESSURIZATION EQUIPMENT - WING DRY BAY, FUEL LEAK DETECTION | 4 | |
| J28008-1 | BLANKING EQUIPMENT - INHIBIT, FUEL SYSTEM | 4 | |
| J28010 | CONSOLE EQUIPMENT - SHOP AIR SUPPLY | 1 | |
| J28010-135 | CONSOLE EQUIPMENT - SHOP AIR SUPPLY | 1 | |
| J28010-139 | CONSOLE EQUIPMENT - SHOP AIR SUPPLY (CE) | 3 | |
| J28010-154 | CONSOLE EQUIPMENT - SHOP AIR SUPPLY | 4 | |
| J28010-26 | CONSOLE EQUIPMENT - SHOP AIR SUPPLY | 6 | |
| J28010-96 | CONSOLE EQUIPMENT | 1 | |
| J28011-1 | Auxiliary Defueling Equipment - External Power Control Unit | 1 | |
| J28011-10 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28011-11 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-205 | Auxiliary Defueling Equipment -External Power Control Unit | 3 | |
| J28011-305 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-306 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| J28011-5 | Auxiliary Defueling Equipment - External Power Control Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28011-6 | Auxillary Defueling Equipment | 2 | |
| J28011-7 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-7 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-8 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28011-9 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J28013-1 | FUEL DRAIN SUMP FITTING EQUIPMENT | 17 | |
| J28014-1 | PALLET EQUIPMENT - AUXILIARY FUEL TANK INSTALLATION | 2 | |
| J28015-1 | Test Equipment -Leak And Pressure. Auxiliary Tank Fuel Line Shroud | 1 | |
| J28017-1 | ADAPTER EQUIPMENT – DRY BAY PRESSURIZATION, WING | 5 | |
| J29002-1 | REMOVAL/INSTALLATION EQUIPMENT - RAM AIR TURBINE (CE) | 4 | |
| J29002-16 | REMOVAL/INSTALLATION EQUIPMENT - RAM AIR TURBINE | 1 | |
| J29002-25 | Removal/Installation Equipment | 2 | |
| J29004-1 | EXTENSION EQUIPMENT - GROUND SERVICE DISCONNECT, L/R HYDRAULIC SYSTEMS | 3 | |
| J29006-1 | BLEEDER HOSE EQUIPMENT - HYDRAULIC SYSTEM | 8 | |
| J29006-2 | HYDRAULIC SYSTEM BLEEDER HOSE EQUIPMENT | 1 | |
| J32001 | MEASURING EQUIPMENT - BRAKE PEDAL | 1 | |
| J32001-31 | Equipment Measuring Brake Pedal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32001-39 | Equipment, Measuring Brake Pedal Load | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32001-63 | MEASUREMENT EQUIPMENT - BRAKE PEDAL | 2 | |
| J32001-64 | MEASURING EQUIPMENT - BRAKE PEDAL | 4 | |
| J32001-67 | MEASURING EQUIPMENT - BRAKE PEDAL (FOR SINGLE PEDAL) | 6 | |
| J32001-68 | Measuring Equipment - Brake Pedal | 7 | |
| J32001-68-REVG | MEASURING EQUIPMENT - BRAKE PEDAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32002-120 | SLING EQUIPMENT - DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MAIN LANDING GEAR | 6 | |
| J32002-40 | Sling Equipment - Drag & Side Strut | 1 | |
| J32002-60 | SLING EQUIPMENT - DR | 5 | |
| J32002-61 | SLING EQUIPMENT - DR | 5 | |
| J32002-73 | SLING EQUIPMENT - DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MLG | 7 | |
| J32002-96 | SLING EQUIPMENT - DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MLG | 1 | |
| J32002-97 | SLING EQUIPMENT - DRAG AND SIDE STRUT REMOVAL/ INSTALLATION, MLG | 3 | |
| J32002-98 | Sling Equipment | 7 | |
| J32004-1 | Puller Equipment -Trunnion Pin -Nlg | 5 | |
| J32004-21 | Puller Equipment -Trunnion Pin -Nlg | 11 | |
| J32004-22 | PULLER EQUIPMENT - TRUNNION PIN - NLG | 7 | |
| J32004-23 | PULLER EQUIPMENT - TRUNNION PIN - NLG | 8 | |
| J32005-1 | PULLER EQUIPMENT - TRUNNION PIN, NOSE LANDING GEAR, UPPER DRAG STRUT | 6 | |
| J32005-19 | PULLER EQUIPMENT - TRUNNION PIN, NOSE LA | 10 | |
| J32007-1 | PROTECTOR EQUIPMENT - AXLE AND THREAD, NLG | 22 | |
| J32008-1 | PULLER EQUIPMENT - BRAKE SYSTEM PINS, MAIN LANDIN | 8 | |
| J32008-31 | Equipment - Puller, Main Landing Gear Brake Pin | 9 | |
| J32008-54 | Puller Equipment -Brake System Pins. Main Landing Gear | 1 | |
| J32008-74 | PULLER EQUIPMENT - BRAKE SYSTEM PINS, MAIN LANDING GEAR | 10 | |
| J32008-88 | PULLER EQUIPMENT - BRAKE SYSTEM PINS, MAIN LANDING GEAR | 5 | |
| J32009-29 | Replacement Equipment, NLG Seals | 6 | |
| J32009-45 | REPLACEMENT EQUIPMEN | 6 | |
| J32009-49 | REPLACEMENT EQUIPMENT - NOSE LANDING GEAR LOWER SEALS | 6 | |
| J32010-1 | Puller Equipment - Sleeve Wheel & Brake | 2 | |
| J32010-106 | PULLER EQUIPMENT - BRAKE SLEEVE, MLG AXLES | 7 | |
| J32010-107 | PULLER EQUIPMENT | 4 | |
| J32010-110 | PULLER EQUIPMENT - BRAKE SLEEVE, MLG AXLES | 5 | |
| J32010-58 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, AXLES | 2 | |
| J32010-62 | Puller Equipment -Wheel And Brake Sleeves. Main Landing Gear Axles | 4 | |
| J32010-74 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, MAIN LANDING GEAR AXLES (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32010-75 | PULLER EQUIPMENT- WH | 1 | |
| J32011 | DOWN LOCK EQUIPMENT B777 & B787 | 1 | |
| J32011-3 | DOWNLOCK EQUIPMENT - NOSE LANDING GEAR AND MAIN LANDING GEAR | 17 | |
| J32011-3 | DOWNLOCK EQUIPMENT - NLG & MLG | 17 | |
| J32011-4 | DOWNLOCK EQUIPMENT - NLG AND MLG | 12 | |
| J32011-7 | DOWNLOCK EQUIPMENT - NLG AND MLG | 14 | |
| J32011C-4-A | DOWNLOACK EQUIPMENT - NLG (CPN 4065554) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32012-18 | EQUIPMENT PULLER | 18 | |
| J32012-18 | PULLER EQUIPMENT, BRAKE MLG | 18 | |
| J32013-1 | SIDE STRUT ADJUSTMENT EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 11 | |
| J32014-116 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 9 | |
| J32014-26 | Equipment Rep. MLG Lower Bearing Seal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32014-29 | Replacement Equipment, MLG Seals | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32014-89 | REPLACEMENT EQUIPMEN | 2 | |
| J32015 | RIGGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32015-1 | Equipment - Rigging, Nose Landing Gear "Not Compressed" Sensors | 7 | |
| J32018-14 | EQUIPMENT | 12 | |
| J32018-19 | ADJUSTMENT EQUIPMENT - DOWNLOCK STOP, MAIN LANDING GEAR SIDE AND DRAG STRUTS | 11 | |
| J32019-50 | SLING EQUIPMENT - RETRACT ACTUATOR REMOVAL/ INSTALLATION, MLG (CE) | 3 | |
| J32019-59 | SLING EQUIPMENT - RETRACT ACTUATOR REMOVAL/ INSTALLATION, MLG (CE) | 7 | |
| J32019-97 | SLING EQUIPMENT - RETRACT ACTUATOR REMOVAL/ INSTALLATION, MLG (CE) | 5 | |
| J32021-20 | REM /INST EQUIPMENT - RETRACT ACTUATOR, NLG | 6 | |
| J32025 | Hoist Equipment- NLG Drag Strut Rem/Inst | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32025-1 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/INSTALLATION | 6 | |
| J32025-29 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/ INSTALLATION | 3 | |
| J32026-1 | SLING EQUIPMENT - HANDLING, NLG | 8 | |
| J32027-47 | Hoist Equipment. R/I NLG | 5 | |
| J32027-63 | Hoist Equipment -Removal/Installation. Nlg | 10 | |
| J32028-1 | PIN ASSY, NLG, J32028-2 (INCLUDED IN J32028-1 EQUIPMENT) | 11 | |
| J32028-2 | Lockpin Equipment | 10 | |
| J32028-3 | Lockpin Equipment | 12 | |
| J32031-12 | EQUIPMENT - PROTECTOR, MAIN LANDING GEAR | 22 | |
| J32031-13 | PROTECTOR EQUIPMENT- AXLE MLG | 11 | |
| J32031-3 | EQUIPMENT - PROTECTOR, MAIN LANDING GEAR J32031-12 | 10 | |
| J32032-19 | WRENCH EQUIPMENT - WHEEL RETENTION NUT, MAIN LANDING GEAR | 9 | |
| J32032-22 | WRENCH EQUIPMENT - WHEEL RETENTION NUT, MAIN LAND | 22 | |
| J32032-22 | WRENCH EQUIPMENT WHEEL RETENTION NUT | 22 | |
| J32032-22 | WRENCH EQUIPMENT - WHEEL RETENTION NUT, MAIN LANDI | 22 | |
| J32032-23 | WRENCH EQUIPMENT MLG | 10 | |
| J32036 | REMV'L & INST'L EQUIPMENT - AFT TRUNNION PIN MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32036-19 | Rem/Inst Equipment - Aft Trunnion, Pin MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32036-2 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 1 | |
| J32036-27 | EQUIPMENT-REMOVAL INSTALLATION,MLG AFT TRUNNION PIN | 8 | |
| J32036-40 | Removal/Install Equipment Aft Trunnion | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32036-55 | Removal/Installation Equipment -Aft Trunnion Pin. Main Landing Gear | 4 | |
| J32036-56 | REMOVAL/INSTALLATION, MLG AFT TRUNNION PIN EQUIPMENT | 4 | |
| J32036-57 | Equipment - Removal/Installation, MLG Aft Trunnion Pin | 6 | |
| J32036-75 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 5 | |
| J32037-105 | EQUIPMENT - REMOVAL/ | 3 | |
| J32037-105-M | SPRING INSTL/RMVL EQUIPMENT- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32037-106 | SPRING UPLOCK REMOVAL EQUIPMENT | 19 | |
| J32037-119 | Spring Removal / Installation Equipment -Main Landing Gear And Nose Landing Gear | 1 | |
| J32037-120 | Spring Removal / Installation Equipment -Main Landing Gear And Nose Landing Gear | 2 | |
| J32037-121 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 1 | |
| J32037-122 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 6 | |
| J32037-123 | EQUIPMENT - REMOVAL/INSTALLATION, MLG | 4 | |
| J32037-126 | Spring Removal / Installation Equipment -Main Landing Gear And Nose Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32037-138 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AND NLG SPRINGS (PRE SB 777-32-0081) | 3 | |
| J32037-139 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDI | 4 | |
| J32037-165 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 1 | |
| J32037-31 | Spring Rem/Inst Equipment - MLG & NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32037-82 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MLG & NL | 1 | |
| J32038-41 | REMOVAL / INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 4 | |
| J32038-42 | REMOVAL / INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 6 | |
| J32038-52 | REMOVAL / INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 6 | |
| J32038-53 | REMOVAL / INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 9 | |
| J32043 | LANDING GEAR LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32043-119 | EQUIPMENT - MLG, REM | 7 | |
| J32043-123 | EQUIPMENT - MAIN LANDING GEAR (MLG), REMOVAL AND INSTALLATION | 5 | |
| J32043-124 | EQUIPMENT-MLG, REMOVAL AND INSTALLATION (CE) | 9 | |
| J32043-125 | EQUIPMENT - MAIN LANDING GEAR REMOVAL/INSTALLATION | 11 | |
| J32043-150 | EQUIPMENT - MAIN LANDING GEAR (MLG), REMOVAL AND INSTALLATION | 1 | |
| J32043-151 | EQUIPMENT - MAIN LANDING GEAR (MLG), REMOVAL AND INSTALLATION | 7 | |
| J32043-175 | LIFT LUG EQUIPMENT | 9 | |
| J32043-176 | EQUIPMENT - MAIN LANDING GEAR, REMOVAL AND INSTALLATION | 6 | |
| J32043-178 | EQUIPMENT – MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32048-1 | Equipment Handling MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32048-25 | Handling Equipment - MLG Torsion Links | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32048-27 | HANDLING EQUIPMENT - | 1 | |
| J32048-52 | HANDLING EQUIPMENT - MLG TORSION LINKS (CE) | 3 | |
| J32048-53 | Equipment - Handling, MLG Torsion Links | 9 | |
| J32053-1 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-129 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 1 | |
| J32053-92 | FIXTURE EQUIPMENT - FUNCTIONAL TEST LANDING GEAR ACTUATOR | 3 | |
| J32054-1 | Ret Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-11 | RETAINER EQUIPMENT, MLG/NLG TORSION LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-116 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 4 | |
| J32054-117 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 4 | |
| J32054-35 | Retainer Equipment | 1 | |
| J32054-39 | SLING EQUIPMENT - INBOARD TRAILING EDGE FLAP | 1 | |
| J32054-50 | RETAINER EQUIPMENT | 8 | |
| J32054-51 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDIN | 10 | |
| J32054-52 | RETAINER EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-52-M | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-53 | RETAINER EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-53-M | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32054-9 | RETAINER EQUIPMENT, MLG/NLG TORSION LINK | 3 | |
| J32054-91 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 6 | |
| J32054-92 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LAN | 12 | |
| J32057-1 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLY | 1 | |
| J32057-108 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLI | 3 | |
| J32057-94 | FIXTURE EQUIPMENT - LANDING GEAR ACTUATOR ASSEMBLIES | 1 | |
| J32057-96 | Fixture Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32058-1 | CHECK EQUIPMENT - BACKLASH, NLG STEERING GEAR BOX | 2 | |
| J32060 | DRAIN EQUIPMENT - SHOCK STRUT, MAIN LANDING GEAR/NOSE LANDING GEAR | 1 | |
| J32060-1 | DRAIN EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR (MLG)/NOSE LANDING GEAR (NLG) | 25 | |
| J32060-2 | DRAIN EQUIPMENT | 3 | |
| J32061-35 | SHOCK STRUT EQUIPMENT - COMPONENT MAINTENANCE, NLG | 3 | |
| J32062-1 | SPL-8264 Transportation Equipment - Tower Jack, Main Landing Gear | 7 | |
| J32062-26 | SPL-8264 TRANSPORTATION EQUIPMENT - TOWER JACK, MAIN LANDING GEAR | 6 | |
| J32063-1 | Equipment - Locating, MLG Door Uplock Roller | 8 | |
| J32064-1 | OVERHAUL EQUIPMENT - UPLOCK ASSEMBLY, MAIN LANDING GEAR | 3 | |
| J32064-47 | OVERHAUL EQUIPMENT - UPLOCK ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32066-1 | Build-Up Equipment -Truck Beam. Main Landing Gear | 3 | |
| J32066-157 | BUILD-UP EQUIPMENT - TRUCK BEAM, MAIN LANDING GEAR | 3 | |
| J32066-197 | BUILD-UP EQUIPMENT - TRUCK BEAM, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32067-49 | ACCESSORY EQUIPMENT | 1 | |
| J32068-1 | Shock Strut Equipment -Component Maintenance Main Landing Gear | 2 | |
| J32069-129 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT MLG | 2 | |
| J32069-129 -176 -179 -180 -181 | Build-Up Fixture Equipment -Oleo Strut. Mlg | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32069-176 | BUILD-UP FIXTURE EQUIPMENT -OLEO STRUT, MLG | 1 | |
| J32069-179 | BUILD-UP FIXTURE EQUIPMENT -OLEO STRUT, MLG | 1 | |
| J32069-180 | BUILD-UP FIXTURE EQUIPMENT -OLEO STRUT, MLG | 1 | |
| J32069-181 | BUILD-UP FIXTURE EQUIPMENT -OLEO STRUT, MLG | 1 | |
| J32069-182 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-183 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-184 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32069-185 | BUILD-UP FIXTURE EQUIPMENT - OLEO STRUT, MAIN LANDING GEAR | 1 | |
| J32070-59 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32070-64 | Build-Up Fixture Equipment -Shock Strut. Nose Landing Gear | 2 | |
| J32072-34 | REMOVAL EQUIPMENT | 1 | |
| J32072-35 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR (NLG) AND MAIN LANDING GEAR (MLG) | 5 | |
| J32072-36 | Equipment - Removal, Dynamic Seal, NLG And MLG (Used On 777F, 777-200LR, 777-300ER) | 3 | |
| J32072-37 | Removal Equipment -Dynamic Seal. Nose Landing Gear (Nlg) And Main Landing Gear (Mlg) | 3 | |
| J32072-49 | REMOVAL EQUIPMENT - DYNAMIC SEAL, NOSE LANDING GEAR AND MAIN LANDING GEAR | 3 | |
| J32072-50 | REMOVAL EQUIPMENT | 7 | |
| J32073-21 | HOIST EQUIPMENT - REMOVAL/INSTALLATION INNER CYLIN | 9 | |
| J32074-1 | SLING EQUIPMENT | 1 | |
| J32074-30 | SLING EQUIPMENT - MAIN LANDING GEAR DOOR HANDLING | 4 | |
| J32074-61 | SLING EQUIPMENT - MAIN LANDING GEAR DOOR HANDLING | 2 | |
| J32075-1 | SPRING EQUIPMENT - MAIN LANDING GEAR SIDE STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32075-42 | SPRING EQUIPMENT - MAIN LANDING GEAR SIDE STRUT | 2 | |
| J32076-1 | SLING EQUIPMENT - INNER CYLINDER, MAIN LANDING GEAR | 7 | |
| J32076-13 | Sling Equipment, Main Landing Gear Inner Cylinder | 8 | |
| J32077-1 | TRANSPORTATION DOLLY EQUIPMENT - STRUT ASSEMBLY/INNER CYLINDER MAIN LANDING GEAR | 1 | |
| J32077-55 | TRANSPORTATION DOLLY EQUIPMENT - STRUT ASSEMBLY/INNER CYLINDER MAIN LANDING GEAR | 3 | |
| J32077-67 | TRANSPORTATION DOLLY EQUIPMENT - STRUT ASSEMBLY/IN | 4 | |
| J32077-76 | DOLLY EQUIPMENT | 2 | |
| J32080-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSE | 1 | |
| J32080-23 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32081-1 | SOCKET EQUIPMENT - RETAINING NUT ASSEMBLY, LOWER DRAG STRUT, NLG | 3 | |
| J32082-1 | REPLACEMENT EQUIPMEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32082-62 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 1 | |
| J32082-69 | Replacement Equipment -Lower Bearing Seals. Main Landing Gear (Mlg) | 1 | |
| J32082-73 | Equipment - Replacement, MLG Lower Bearing Seals | 6 | |
| J32082-98 | REPLACEMENT EQUIPMENT - LOWER BEARING SE | 8 | |
| J32083-1 | SHOCK STRUT EQUIPMENT - COMPONENT MAINTENANCE, MLG | 5 | |
| J32084-1 | SHOCK STRUT EQUIPMEN | 9 | |
| J32087-1 | Turnbuckle Equipment -Shock Strut. Mlg | 11 | |
| J32089-1 | FIXTURE EQUIPMENT - HYDRAULIC STRUT, ACTUATOR ASSEMBLY, MAIN LANDING GEAR | 1 | |
| J32089-124 | FIXTURE EQUIPMENT - HYDRAULIC STRUT | 2 | |
| J32090-1 | Spring Removal/Installation Equipment -Main Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32090-17 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 4 | |
| J32090-53 | Spring Removal Install Equipment - MLG | 4 | |
| J32090-56 | Spring Removal/Installation Equipment -Main Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32090-57 | SPRING R/I EQUIPMENT | 2 | |
| J32090-69 | Spring Removal Install Equipment - MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32090-70 | Removal/Installation Equipment, MLG Uplock And Downlock Spring | 6 | |
| J32091-1 | TEST EQUIPMENT VELOCITY/POSITION TRANSDUCER | 3 | |
| J32091-10 | TEST EQUIPMENT SENSOR FIXTURE | 3 | |
| J32091-11 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 3 | |
| J32091-2 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32091-3 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 3 | |
| J32091-4 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32091-5 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 1 | |
| J32091-6 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32091-7 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | 1 | |
| J32091-8 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32091-9 | TEST EQUIPMENT - VELOCITY/POSITION TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32093-1 | REM /INST EQUIPMENT - RETRACT ACTUATOR, NLG | 4 | |
| J32107-1 | FIXTURE EQUIPMENT - SIDE STRUT ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J32108-1 | EQUIPMENT-DRAIN MLG/NLG OLEO STRUT | 1 | |
| J32108-16 | DRAIN EQUIPMENT | 10 | |
| J32109-1 | FIXTURE EQUIPMENT - DRAG STRUT ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34003-1 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-1, -2, -3, -4, -5, -6, -55 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34003-2 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-3 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-4 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-5 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-55 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34003-6 | BREAKOUT BOX EQUIPMENT - MISCELLANEOUS CONNECTORS, LINE MAINTENANCE | 1 | |
| J34003-XX | Breakout Box Equipment -Miscellaneous Connectors. Line Maintenance | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004 -8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-1 | BREAKOUT BOX EQUIPMENT - CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-3 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-4 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-5 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-6 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-7 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-8 | BREAKOUT BOX EQUIPMENT - NON-STANDARD CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J34004-9 | BREAKOUT BOX EQUIPMENT - CONNECTORS (S280W551), LINE MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J36001-102 | Precooler Equipment -Removal/Installation. Rolls Royce Trent 800 | 2 | |
| J36001-119 | PRECOOLER EQUIPMENT - REMOVAL/INSTALL, ROLLS ROYCE | 5 | |
| J36002-338 | PRECOOLER REMOVAL/INSTALLATION EQUIPMENT PW ENGINES | 2 | |
| J36004-1 | Removal/Installation Equipment -Precooler. Pw4084 Engines | 2 | |
| J36004-38 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, PW ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J36006-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, GE90 ENGINE(ENGINE REMOVED) | 7 | |
| J36007-1 | Pressure Test Equipment | 2 | |
| J36007-2 | PRESSURE TEST EQUIPMENT - DUCT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J36008-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36009-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 2 | |
| J36010-1 | PRESSURE TEST EQUIPMENT - DUCT | 2 | |
| J36011-1 | PRESSURE TEST EQUIPMENT - DUCT | 1 | |
| J36012-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36013-1 | Pressure Test Equipment -Duct Assembly | 1 | |
| J36014-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36015-1 | Pressure Test Equipment -Duct Assembly | 2 | |
| J36016-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36018-1 | PRESSURE TEST EQUIPMENT - DUCT ASSEMBLY | 1 | |
| J36019-1 | Pressure Test Equipment -Duct Assembly | 1 | |
| J36020-1 | PRECOOLER EQUIPMENT - REM / INST GE90-115 ENG | 7 | |
| J38001-16 | EQUIPMENT PRESSURISATION | 7 | |
| J38001-20 | PRESSURIZATION EQUIPMENT - WASTE DRAIN SYSTEM | 8 | |
| J3800116 | EQUIPMENT PRESSURISATION | 7 | |
| J38003-1 | WATER AND WASTE TANK REMOVAL AND INSTALLATION EQUIPMENT | 1 | |
| J38004 | PUMP EQUIPMENT - VACUUM LAVATORY SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J38004-1 | PUMP EQUIPMENT - VACUUM LAV SYSTEM | 1 | |
| J38004-232 | Pump Equipment - Vacuum Lavatory System | 1 | |
| J38004-247 | PUMP EQUIPMENT - VACUUM LAV SYSTEM | 8 | |
| J38004-287 | PUMP EQUIPMENT - VACUUM LAV SYSTEM | 1 | |
| J45001-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT - LAPTOP | 1 | |
| J45001-10 | Ground Support Equipment (Gse) Kit -Laptop | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J45001-12 | GROUND SUPPORT EQUIPMENT (GSE) KIT - LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J45001-13 | GROUND SUPPORT EQUIPMENT (GSE) KIT - LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J45003-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT - LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J45003-12 | GROUND SUPPORT EQUIPMENT (GSE) KIT - LAPTOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002 | FIBER OPTIC BREAKOUT EQUIPMENT-ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-1 | Fiber Optic Breakout Equipment -Arinc 600 Style Connectors | 1 | |
| J46002-1, -2, -3, -4, -5, -6, -7, -8, -9, -10, -11, -12, -13, -14 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-10 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 3 | |
| J46002-11 | Fiber Optic Breakout Equipment - ARINC 600 Style Connectors | 4 | |
| J46002-12 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 4 | |
| J46002-13 | Fiber Optic Breakout Equipment | 4 | |
| J46002-14 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 3 | |
| J46002-15 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-16 | Fiber Optic Breakout Equipment | 4 | |
| J46002-17 | Fiber Optic Breakout Equipment - ARINC 600 Style Connectors | 4 | |
| J46002-18 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-19 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-2 | Fiber Optic Breakout Equipment -Arinc 600 Style Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-20 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 1 | |
| J46002-21 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 1 | |
| J46002-3 | Fiber Optic Breakout Equipment -Arinc 600 Style Connectors | 1 | |
| J46002-4 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 2 | |
| J46002-5 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J46002-6 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 4 | |
| J46002-7 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 4 | |
| J46002-8 | FIBER OPTIC BREAKOUT EQUIPMENT - ARINC 600 STYLE CONNECTORS | 1 | |
| J46002-9 | Fiber Optic Breakout Equipment - ARINC 600 Style Connectors | 5 | |
| J47893 | ZEROING EQUIPMENT - SYNCHRO-RESOLVERS SYNCHRO-TRANSMITTERS AND WIRING | 7 | |
| J49002-12 | Fiber Optic Breakout Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J49002-13 | Fiber Optic Breakout Equipment | 1 | |
| J49002-2 | Fiber Optic Breakout Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J49002-3 | Fiber Optic Breakout Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J49002-8 | Fiber Optic Breakout Equipment | 1 | |
| J49003-1 | Equipment Hoist - APU Rem/Inst | 4 | |
| J49003-43 | Equipment - Hoist, APU Installation/Removal Cable Type Fishpole | 13 | |
| J49003-47 | HOIST EQUIPMENT - APU, INSTALLATION/REMOVAL | 9 | |
| J51003-1 | Static balance equipment-flight control surfaces | 1 | |
| J51003-59 | Static balance equipment-flight control surfaces | 3 | |
| J51003-69 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 2 | |
| J51004-1 | Vacuum Generator Test Equipment | 6 | |
| J51024-2 | TEST EQUIPMENT - LATCH, BLOW OUT DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J51024-3 | TEST EQUIPMENT - LATCH, BLOW OUT DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52001-34 | Equipment - Hold-Open, Passenger Entry Door | 12 | |
| J52002-1 | SLING EQUIPMENT - BULK CARGO DOOR (CE) | 3 | |
| J52002-26 | SLING EQUIPMENT - BULK CARGO DOOR (CE) | 2 | |
| J52003-2 | Barrier - Door, Main Equipment Center Access (Door 117AL) | 10 | |
| J52009-109 | Barrier, Frame Equipment - Passenger Entry Door | 7 | |
| J52020-1 | PIN ASSY, MLG, J32028-3 (INCLUDED IN J32028-1 EQUIPMENT) | 11 | |
| J52021-1 | SCREW EQUIPMENT - SAFETY, PASSENGER DOOR COUNTERBALANCE SPRING | 7 | |
| J52023-39 | BACKLASH CHECK EQUIPMENT - LARGE CARGO DOOR, MANUAL DRIVE GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52024-1 | TEST EQUIPMENT - LAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52024-2 | TEST EQUIPMENT - LATCH ASSEMBLY, BLOW OUT DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52024-23 | TEST EQUIPMENT - LATCH ASSEMBLY, BLOW OUT DOORS | 3 | |
| J52024-24 | TEST EQUIPMENT - LATCH ASSY BLOW OUT DOORS. | 5 | |
| J52024-3 | Test Equipment -Latch Assembly. Blow Out Doors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52025-1 | EQUIPMENT - INSTALLATION, SMALL CARGO DOOR VENT DOOR | 5 | |
| J52026-1 | Compression Equipment, Bulk Cargo Door Counterbalance Spring | 8 | |
| J52027-1 | Test Equipment | 6 | |
| J52028-1 | Backlash Fixture Equipment -Manual Drive Gearbox. Latch Pdu. Large Cargo Door | 1 | |
| J52029 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52029-1 | TEST EQUIPMENT, SUPERSEDED BY -57 | 1 | |
| J52029-57 | Test Equipment - Squib, Overwing Exit | 7 | |
| J52029-57-REVC | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52030-1 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR DOOR (CE) | 5 | |
| J52032-39 | Sling Equipment | 5 | |
| J52039-1 | Personnel Barrier Equipment - Main Cargo Door | 4 | |
| J52039-103 | PERSONNEL BARRIER EQUIPMENT - MAIN CARGO DOOR | 6 | |
| J52039-104 | PERSONNEL BARRIER EQUIPMENT - MAIN DECK CARGO DOOR, BARRIER ASSEMBLY | 2 | |
| J52039-2 | PERSONNEL BARRIER EQUIPMENT - MAIN DECK CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J52039-87 | PERSONNEL BARRIER EQUIPMENT - MAIN DECK CARGO DOOR | 7 | |
| J52039-88 | PERSONNEL BARRIER EQUIPMENT - MAIN CARGO DOOR | 7 | |
| J52039-90 | PERSONNEL BARRIER EQUIPMENT - MAIN CARGO DOOR | 6 | |
| J52039-91 | Personnel Barrier Equipment | 4 | |
| J52039-92 | PERSONNEL BARRIER EQUIPMENT - MAIN DECK CARGO DOOR, END BARRIER ASSEMBLY | 2 | |
| J52039-XX | Personnel Barrier Equipment -Main Deck Cargo Door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J53001-1 | LADDER EQUIPMENT | 14 | |
| J53001-49 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN | 4 | |
| J53003-1 | MAINTENANCE PLATFORM EQUIPMENT - PRESSURE BULKHEAD | 2 | |
| J53003-174 | Maintenance Platform Equipment -Pressure Bulkhead Access | 2 | |
| J53003-235 | MAINTENANCE PLATFORM EQUIPMENT | 4 | |
| J53003-236 | Platform Equipment | 4 | |
| J53005-1 | REMOVAL/INSTALLATION EQUIPMENT - RIGID CARGO BARRIER | 1 | |
| J54001-73 | PRELOAD EQUIPMENT, STRUT INSTALLATION, ENGINE REMOVED (GE AND PW ENGINES) | 9 | |
| J54001-92 | PRELOAD EQUIPMENT, STRUT INSTALLATION, ENGINE REMOVED (GE AND PW ENGINES) | 8 | |
| J54002-1 | Equipment, Sling Engine Strut Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54002-85 | SLING EQUIPMENT - STRUT REMOVAL/INSTALLATION, PRATT AND WHITNEY ENGINE | 2 | |
| J54003-1 | SLING EQUIPMENT - RE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54003-2 | Sling Equipment-R/I Engine Struts RR | 7 | |
| J54003-50 | Sling Equipment GE | 4 | |
| J54004-131 | Reml/Instal Equipment | 4 | |
| J54004-132 | EQUIPMENT - REMOVAL/INSTALLATION, AFT STRUT FAIRING (APPLICABLE TO 777 LINE NUMBER 1346 AND ON) | 2 | |
| J54004-62 | Rem/Inst Equipment - Aft Strut Fairing | 2 | |
| J54004-76 | Equipment - Removal/Installation, Aft Strut Fairing | 1 | |
| J54009-1 | SLING EQUIPMENT - STRUT AFT FAIRING | 3 | |
| J54009-15 | Sling Equipment - Strut Aft Fairing Ce | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54009-25 | SLING EQUIPMENT- STR | 5 | |
| J54013-1 | SLING EQUIPMENT | 1 | |
| J54014-1 | SLING EQUIPMENT - ST | 3 | |
| J54014-105 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD (GE, PW AND RR ENGINES) | 1 | |
| J54014-106 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD (GE, PW AND RR ENGINES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54014-107 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD (GE, PW AND RR ENGINES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54014-2 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD (GE, PW AND RR ENGINES) | 1 | |
| J54014-3 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD (GE, PW AND RR ENGINES) | 1 | |
| J54018-1 | Sling Equipment GE9X | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J54019-1 | Removal/Installation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55001-1 | Bearing Equipment -Horizontal Stabilizer. Removal/ Installation | 1 | |
| J55001-13 | BEARING EQUIPMENT - HORIZONTAL STABILIZER, REMOVAL/INSTALLATION | 3 | |
| J55001-16 | BEARING EQUIPMENT - HORIZONTAL STABILIZER REMOVAL/INSTALLATION | 5 | |
| J55002-36 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS | 9 | |
| J55002-37 | TEST EQUIPMENT, HORIZONTAL STABILIZER FREEPLAY | 10 | |
| J55002-53 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS | 7 | |
| J55002-59 | HORIZONTAL STABILIZER FREEPLAY TEST EQUIPMENT | 8 | |
| J55003-1 | Equipment, Rem/Inst Horiz Stabilizer Hinge Pin | 8 | |
| J55003-9 | EQUIPMENT - REMOVAL/INSTALLATION, HORIZONTAL STABILIZER HINGE PIN | 9 | |
| J55004 | JACKING EQUIPMENT-HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55004-1 | EQUIPMENT - JACKING, | 2 | |
| J55004-35 | JACKING EQUIPMENT - HORIZONTAL STABILIZER (CE) | 7 | |
| J55004-86 | JACKING EQUIPMENT - HORIZONTAL STABILIZER | 6 | |
| J55005-1 | Sling Equipment -Removal/Installation. Vertical Fin | 3 | |
| J55005-32 | SLING EQUIPMENT - REMOVAL/INSTALLATION, VERTICAL FIN | 5 | |
| J55006-1 | TORQUE EQUIPMENT - VERTICAL FIN BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55006-11 | TORQUE EQUIPMENT - VERTICAL FIN BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J55006-114 | TORQUE EQUIPMENT FOR VERTICAL FIN ATTACHMENT BOLTS | 7 | |
| J55055-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J57002-1 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD / OUTBOARD LEADING EDGE SLAT | 3 | |
| J57002-34 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD/OUTBOARD LEADING EDGE SLAT | 3 | |
| J57002-49 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD/OUTBOARD LEADING EDGE SLAT | 1 | |
| J57002-50 | LOCATING EQUIPMENT - WEDGE REPLACEMENT, INBOARD/OUTBOARD LEADING EDGE SLAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J57003-1 | SLING EQUIPMENT - RAKED WING TIP INSTALLATION AND REMOVAL | 5 | |
| J57003-16 | SLING EQUIPMENT - RAKED WING TIP INSTALLATION AND REMOVAL | 6 | |
| J70001-63 | SLING EQUIPMENT - INLET COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71001 | SLING EQUIPMENT-INLET COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71001-63 | Sling Equipment -Inlet Cowl (Ce) | 5 | |
| J71001-66 | Equipment - Sling, Inlet Cowl, GE90-70/80/90 Series And GE90-100 Series | 12 | |
| J71001-94 | SLING EQUIPMENT - INLET COWL | 5 | |
| J71002 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT GE90 | 1 | |
| J71002-1 | Equipment Torque - GE90 Engine Mount Bolts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71002-52 | Torque Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71002-57 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT GE90 | 4 | |
| J71002-74 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT GE90 | 1 | |
| J71002-75 | Torque Equipment - GE90 Engine Mount Bolts | 7 | |
| J71002-95 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT | 5 | |
| J71003-1 | Equipment Bootstrap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71003-109 | Hold Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71003-123 | Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71003-148 | BOOTSTRAP EQUIPMENT | 2 | |
| J71003-148-M | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71003-153 | BOOTSTRAP EQUIPMENT - GE90 ENGINE (CE) | 2 | |
| J71004-9 | SLING EQUIPMENT - FAN COWL (ALL ENGINES ) | 12 | |
| J71005- | BOOTSTRAP EQUIPMENT - PW ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71005-73 | BOOTSTRAP EQUIPMENT - PW ENGINES | 2 | |
| J71005-74 | BOOTSTRAP EQUIPMENT - PW ENGINES | 1 | |
| J71005-84 | BOOTSTRAP EQUIPMENT - PW ENGINES 112 INCH | 5 | |
| J71005-85 | BOOSTRAP EQUIPMENT - | 4 | |
| J71006 | SPECIFICATION - POWERED HOIST SYSTEM, GROUND SUPPORT EQUIPMENT (GSE) OPERATIONS | 1 | |
| J71007 | TORQUE EQUIPMENT FOR PW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71007-103 | TORQUE EQUIPMENT - MOUNT BOLTS, PW ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71007-50 | Equipment Torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71007-70 | TORQUE EQUIPMENT - MOUNT BOLTS, PW ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71007-88 | Torque Equipment -Mount Bolts. Pw Engines | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71007-89 | TORQUE EQUIPMENT - MOUNT BOLTS, PW ENGINES | 4 | |
| J71008 | Equipment, Torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71008-1 | Torque Equipment -Rolls Royce. Trent. Engine Mount | 4 | |
| J71008-15 | EQUIPMENT - TORQUE, ENGINE MOUNT BOLTS (OPTIONAL P/N: J71008-8) | 4 | |
| J71008-8 | TORQUE EQUIPMENT - ROLLS ROYCE, TRENT, ENGINE MOUNT | 5 | |
| J71009-1 | BOOTSTRAP EQUIPMENT - TRENT 800 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71009-2 | Bootstrap Equipment - Trent 800 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71009-68 | BOOTSTRAP EQUIPMENT - TRENT 800 ENGINE | 8 | |
| J71009-69 | SPL-2577 EQUIPMENT - BOOTSTRAP, TRENT 800 ENGINE (MANUAL LEVER HOIST) | 14 | |
| J71013-1 | Adapter Equipment -Stabilization. Pw Engine Mount | 2 | |
| J71013-22 | ADAPTER EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71013-25 | ADAPTER EQUIPMENT - STABILIZATION, PW ENGINE MOUNT | 7 | |
| J71013-44 | FWD Adapter Equipment | 3 | |
| J71015-14 | SLING EQUIPMENT - FAN COWL SUPPORT BEAM, PW AND GE90 ENGINES (CE) | 2 | |
| J71015-18 | SLING EQUIPMENT - FAN COWL SUPPORT BEAM, PW AND GE90 ENGINES | 6 | |
| J71015-28 | SLING EQUIPMENT - FAN COWL SUPPORT BEAM, PW AND GE | 7 | |
| J71019-1 | Stabilization Equipment -Engine Mounts. Rr Trent | 9 | |
| J71019-2 | Stabilization Equipment -Engine Mounts. Rr Trent | 15 | |
| J71026-1 | WRENCH EQUIPMENT - INTERMEDIATE CASE TO FORWARD MOUNT, PW ENGINES | 4 | |
| J71030-1 | SLING EQUIPMENT | 7 | |
| J71031-18 | ALIGNMENT/THREAD PROTECTOR EQUIPMENT - THRUST LINK, ROLLS ROYCE ENGINE | 5 | |
| J71031-19 | ALIGNMENT/THREAD PROTECTOR EQUIPMENT - THRUST LINK, ROLLS ROYCE ENGINE | 4 | |
| J71031-5 | Alignment Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71033-1 | Hold Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71033-109 | EQUIPMENT - HOLD OPEN, FAN COWL, TRENT 800 ENGINE (LIMITED TO A MAXIMUM OF 20KTS OF WIND) 777-200ER, -300 | 12 | |
| J71034-1 | PROOF LOAD FIXTURE - HOLD OPEN EQUIPMENT, FAN COWL, TRENT 800 | 1 | |
| J71035-1 | Locating Jig Equipment -Ebu To Strut. Pw Engines | 1 | |
| J71036-1 | LOCATING JIG EQUIPMENT - EBU TO STRUT, GE ENGINES | 3 | |
| J71040-1 | LOCATING JIG EQUIPMENT - ENGINE BUILD-UP TO STRUT, ROLLS ROYCE ENGINE | 1 | |
| J71042-1 | LOCATING JIG EQUIPMENT - ENGINE BUILDUP TO STRUT, GE90-115B ENGINES | 3 | |
| J71043-119 | BOOTSTRAP EQUIPMENT - GE90 ENGINE | 2 | |
| J71043-129 | SPL-4947 EQUIPMENT - BOOTSTRAP | 3 | |
| J71043-130 | EQUIPMENT - BOOTSTRAP, 4-PT. PICK, GE90 ENGINE | 2 | |
| J71043-131 | Equipment - Bootstrap, 4-Pt. Pick, GE90-70/80/90 Series And GE90-100 Series | 10 | |
| J71043-46 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71043-93 | BOOTSTRAP EQUIPMENT - GE90 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71043-94 | BOOTSTRAP EQUIPMENT - GE90 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71046 | SPECIFICATION - LOAD CELL EQUIPMENT | 2 | |
| J71046- | SPECIFICATION -0 LOAD CELL EQUIPMENT | 2 | |
| J71047-1 | STORAGE CART - SUPPORT EQUIPMENT | 3 | |
| J71047-89 | STORAGE CART - SUPPORT EQUIPMENT | 2 | |
| J71047-90 | STORAGE CART - SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71047-91 | STORAGE CART - SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71047-92 | STORAGE CART - SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71047-93 | STORAGE CART - SUPPORT EQUIPMENT | 1 | |
| J71048-1 | Sling Equipment - Inlet | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71049-1 | Hoist Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71053-1 | Sling Equipment - Fan Cowl | 1 | |
| J71056-1 | Transportation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71056-2 | Transportation Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71058-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71062-1 | Sling Equipment | 1 | |
| J71067-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J71075-1 | Sling Equipment | 3 | |
| J78002-105 | SLING EQUIPMENT | 2 | |
| J78002-160 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78002-70 | SLING EQUIPMENT - PRATT AND WHITNEY FAN THRUST REVERSER | 2 | |
| J78002-97 | SLING EQUIPMENT - PRATT AND WHITNEY FAN THRUST REVERSER | 3 | |
| J78003-1 | Equipment Hold Open - GE90 Engine Fan | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78003-18 | Hold Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78003-27 | HOLD OPEN EQUIPMENT - GE90 FAN REVERSER | 16 | |
| J78004-123 | Sling Equipment -Ge90 Fan Thrust Reverser | 8 | |
| J78004-74 | Sling Equipment - Fan Reverser | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78004-75 | SLING EQUIPMENT - GE90 FAN THRUST REVERSER | 4 | |
| J78004-76 | Sling Equipment -Ge90 Fan Thrust Reverser | 3 | |
| J78004-89 | SLING EQUIPMENT - GE90 FAN THRUST REVERSER | 6 | |
| J78004-90 | SLING EQUIPMENT - GE90 FAN THRUST REVERSER | 11 | |
| J78005-1 | THREAD PROTECTOR EQUIPMENT | 10 | |
| J78005-10 | THREAD PROTECTOR EQUIPMENT - GE90, P/W AND R/R | 12 | |
| J78005-2 | Thread Protector Equipment PW | 5 | |
| J78005-3 | THREAD PROTECTOR EQUIPMENT - GE90, P/W AND R/R | 9 | |
| J78006-1 | HOLD OPEN EQUIPMENT - THRUST REVERSER, ROLLS ROYCE TRENT 800 | 8 | |
| J78006-11 | EQUIPMENT - HOLD-OPEN, RR TRENT, THRUST REVERSER 777-200, | 10 | |
| J78007 | REMV'L / INST'L EQUIPMENT - EXHAUST SLEEVE AND PLU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78007-104 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG | 4 | |
| J78007-3 | Rmvl/Instl Equipment | 1 | |
| J78007-52 | Equipment Rem/Inst Engine Exhaust Sleeve | 3 | |
| J78007-58 | SPL-2427 EQUIPMENT-REMOVAL/INSTALLATION, EXHAUST SLEEVE AND PLUG | 5 | |
| J78007-74 | EQUIPMENT - REM0VAL/INSTALLATI0N EQUIPMENT - EXHAUST SLEEVE AND PLUG, GENX-2B ENGINES | 2 | |
| J78007-85 | REMOVAL/INSTALLATION EQUIPMENT - EXHAUST SLEEVE AND PLUG (CE) | 8 | |
| J78012-1 | SLING EQUIPMENT - SLEEVE, THRUST REVERSER, 777 PRATT AND WHITNEY ENGINES (CE) | 6 | |
| J78015-1 | SLING EQUIPMENT - REMOVAL/INSTALLATION, GE90 FAN REVERSER SLEEVE | 6 | |
| J78015-1-M | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78015-77 | LING EQUIPMENT - REMOVAL/INSTALLATION, GE90 FAN REVERSER SLEEVE | 9 | |
| J78015-96 | SLING EQUIPMENT - REMOVAL/INSTALLATION,GE90 FAN REVERSER SLEEVE FAN REVERSER SLEEVE SLING ARM ATTACHMENT, USED ON 777-200LR, -300ER AND 777F AIRPLANES EQUIPPED WITH GE90 ENGINES. | 9 | |
| J78015-97 | Arm Attachment Equipment | 10 | |
| J78017-1 | Sling Equipment - RR Fan Thrust Reverse | 2 | |
| J78017-59 | SLING EQUIPMENT - RR | 12 | |
| J78022-45 | Hold Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78022-60 | EQUIPMENT-HOLD-OPEN, ENGINE THRUST REVERSERS | 8 | |
| J78026-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78026-102 | SLING EQUIPMENT - REMOVAL/INSTALLATION, ROLLS ROYCE FAN REVERSER SLEEVE (CE) | 3 | |
| J78026-75 | SLING EQUIPMENT FAN | 8 | |
| J78027-1 | REPLACEMENT EQUIPMENT - THRUST REVERSER, V-BLADE, ROLLS ROYCE TRENT 800 | 2 | |
| J78027-2 | Replacement Equipment -Thrust Reverser. V-Blade. Rolls Royce Trent 800 | 2 | |
| J78032-1 | CLAMP EQUIPMENT - BONDING, PRATT AND WHITNEY THRUST REVERSER SLIDER TEFLON TAPE | 2 | |
| J78033-1 | CLAMP EQUIPMENT - BONDING, RR THRUST REVERSER SLIDER TEFLON TAPE | 2 | |
| J78034-1 | CLAMP EQUIPMENT - BONDING, GE THRUST REVERSER SLIDER TEFLON TAPE | 4 | |
| J78035-1 | HOLD OPEN EQUIPMENT - ROLLS ROYCE THRUST REVERSER, THERMAL BLANKET REMOVAL/INSTALLATION | 2 | |
| J78040-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78040-501 | EDP Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J78040-601 | EDP Short Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JM71043-131 | SPL-4947 EQUIPMENT - BOOTSTRAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CFM56/D/4777/C200 | Compressor Wash engine wash equipment | 3 | |
| JMP/LUFT/D/4972/C500 | JUNIPER WATER WASH EQUIPMENT | 2 | |
| JP50000-3 | WEIGHTING EQUIPMENT / JACKING | 1 | |
| JW-500J5 | AIRCRAFT JACKWEIGH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JXHK-GB-1564 | FILLING EQUIPMENT - HYDRALIC FLUID | 2 | |
| K07001 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-1 | Emergency Jacking Equipment - MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-12 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-13 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-14 | EMERGENCY JACKING EQUIPMENT - MAIN LANDING GEAR (CE) | 2 | |
| K07001-18 | EMERGENCY JACKING EQUIPMENT - MAIN LANDING GEAR | 3 | |
| K07001-2 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-4 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-5 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-6 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07001-7 | EMERGENCY JACKING EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-1 | Emergency Jacking Equipment - NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-13 | EMERGENCY JACKING EQUIPMENT - NOSE LANDING GEAR (CE) | 2 | |
| K07002-17 | EMERGENCY JACKING EQUIPMENT - NOSE LANDING GEAR | 4 | |
| K07002-2 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-4 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-5 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-6 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07002-7 | EMERGENCY JACKING EQUIPMENT-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07004-1 | Jack Fitting Equipment -Inner Wing | 8 | |
| K07005-1 | JACK FITTING EQUIPMENT - OUTER WING | 8 | |
| K07006 | SLING EQUIPMENT TETHERING LIFTING AIRPLANE RECOVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07006-1 | SLING EQUIPMENT- LIF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07007-1 | HOIST EQUIPMENT - AIRPLANE RECOVERY WITHOUT MAIN LANDING GEAR (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07007-2 | HOIST EQUIPMENT - AIRPLANE RECOVERY WITHOUT MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07007-35 | HOIST EQUIPMENT - AIRPLANE RECOVERY WITHOUT MAIN LANDING GEAR (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K07007-36 | HOIST EQUIPMENT - AIRPLANE RECOVERY WITHOUT MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10003-1 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | 5 | |
| K10003-13 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10003-21 | Dispatch equipment-idg，CF6-80C2 engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10005-1 | Tether Restraint Equipment -Entry Doors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10006-1 | TETHERING EQUIPMENT - UPPER AFT FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10006-17 | TETHERING EQUIPMENT - UPPER AFT FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10008-14 | PROTECTIVE PLUG EQUIPMENT -ENGINE EXHAUST. GE GENX | 1 | |
| K10008-23 | PROTECTIVE PLUG EQUIPMENT | 5 | |
| K10009-1 | PROTECTIVE PLUG EQUIPMENT -THRUST REVERSER EXHAUST DUCT. GENERAL ELECTRIC GENX | 1 | |
| K10009-15 | PROTECTIVE PLUG EQUIPMENT -THRUST REVERSER EXHAUST | 7 | |
| K10010-1 | Tethering Equipment | 1 | |
| K10010-21 | Tethering Equipment -Inboard And Outboard Flap Support | 1 | |
| K10010-22 | TETHERING EQUIPMENT - INBOARD AND OUTBOARD FLAP SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10012-1 | 787 EXHAUST PLUG EQUIPMENT TOOL | 1 | |
| K10012-14 | 787 EXHAUST PLUG EQUIPMENT TOOL | 5 | |
| K10012-2 | 787 EXHAUST PLUG EQUIPMENT TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10013-1 | Protective Plug Equipment -Thrust Reverser Exhaust Duct. Rr Trent 1000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K10013-15 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST DUCT, RR TRENT 1000 | 6 | |
| K140 | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20001-64 | HOIST - FORWARD ELECTRONIC/EQUIPMENT (E/E) BAY LINE REPLACEABLE UNITS (LRU) | 7 | |
| K20002 | PRESONNEL EQUIPMENT SHOCK ABSORBING LANYARD ENGINEX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20002-1 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, ENGINE/ STRUT | 1 | |
| K20002-25 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, ENGINE/STRUT | 8 | |
| K20002-31 | Personnel Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20003 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20003-35 | Personnel Equipment -Shock Absorbing Lanyard. Upper Wing (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20003-49 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20003-92 | "PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, UPPER WING" | 7 | |
| K20003-97 | EQUIPMENT - PERSONNEL, UPPER WING SHOCK ABSORBING LANYARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20004 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD HOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20004-1 | Safety Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20004-30 | Equipment - Personnel, Shock Absorbing Lanyard, Horizontal Stabilizer (*Safety*) | 1 | |
| K20004-31 | Personnel Equipment -Shock Absorbing Lanyard. Horizontal Stabilizer (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20004-46 | PERSONNEL EQUIPMENT - SHOCK ABSORBING LANYARD, HORIZONTAL STABILIZER | 1 | |
| K20004-60 | PERSONNEL EQUIPMENT – SHOCK ABSORBING LANYARD, HORIZONTAL STABILIZER | 6 | |
| K20010-1 | HOISTING EQUIPMENT | 6 | |
| K20010-2 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20010-3 | HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K20012-1 | PROTECTIVE EQUIPMENT - P100/P150/P200 PANELS, AFT ELECTRICAL/ ELECTRONICS BAY | 2 | |
| K20012-2 | Protective Equipment P150 | 3 | |
| K20012-3 | EQUIPMENT - PROTECTIVE, AFT EE BAY P200 PANEL | 3 | |
| K20013-1 | REMOVAL/INSTALLATION EQUIPMENT - BATTERY AND BATTERY ENCLOSURE, ELECTRONIC EQUIPMENT BAY (CE) | 4 | |
| K21001-1 | Removal/Installation Equipment - Supplemental Cool | 3 | |
| K21002-1 | Transport Equipment -Cargo Refrigeration Unit Removal And Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21002-62 | TRANSPORT EQUIPMENT - CARGO REFRIGERATION UNIT REMOVAL AND INSTALLATION | 3 | |
| K21003-1 | Removal/Installation Equipment - Powered Electroni | 5 | |
| K21003-67 | INSTALLATION/REMOVAL EQUIPMENT - POWER ELECTRONICS COOLING SYSTEM (PECS) COOLING PUMP (CE) | 10 | |
| K21004 | ADAPTER EQUIPMENT-HEAT EXCHANGER CLUSTER REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21004-1 | Adapter Equipment -Heat Exchanger Cluster. Removal And Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21004-40 | ADAPTER EQUIPMENT-HEAT EXCHANGER CLUSTER REMOVAL AND INSTALLATION | 4 | |
| K21004-72 | ADAPTER EQUIPMENT | 8 | |
| K21004-79 | Adapter equipment-heat exchanger cluster removal and installation | 2 | |
| K21004-84 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21004-85 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 4 | |
| K21011 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-1 | Adapter Equipment -Adjustable Angle. Jack (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-11 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-15 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-20 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-21 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-22 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-23 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-26 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-28 | ADAPTEREQUIPMENT-ADJUSTABLEANGLE,JACK | 2 | |
| K21011-32 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-4 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-42 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-5 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-50 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-51 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-52 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
| K21011-55 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-56 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-57 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-58 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-59 | Adapter Equipment -Adjustable Angle Jack (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-6 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-60 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-61 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-62 | Adapter Equipment | 8 | |
| K21011-63 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011-65 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21011PLD | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21013-1 | Removal/Installation Equipment - Forward Cargo Air | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K21013-36 | REMOVAL EQUIPMENT TOOL | 7 | |
| K21014-1 | R/I EQUIPMENT - CONDENSER, AC PACK | 7 | |
| K21018-1 | BYPASS ASSEMBLY- GCU/SCU DISPATCH EQUIPMENT | 8 | |
| K21018-1 | BY-PASS ASSEMBLY - GALLEY & SUPPLEMENTAL COOLING UNIT (GCU & SCU) - DISPATCH EQUIPMENT | 8 | |
| K21018-47 | DISPATCH EQUIPMENT | 2 | |
| K24001-114 | VFSG ALIGNMENT EQUIPMENT | 9 | |
| K24002-1 | DISPATCH EQUIPMENT - COMMON MOTOR STARTER CONTROLLER CMSC | 7 | |
| K24002-2 | Dispatch Equipment | 7 | |
| K24002-3 | Dispatch Equipment - RAM Fan Motor Controller (RFM | 5 | |
| K24002-71 | DISPATCH EQUIPMENT - RFMC | 9 | |
| K24002-71-REVD | DISPATCH EQUIPMENT- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003 | BREAKOUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-1 | Breakout Equipment - Radiall EPX Connectors (P100, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-10 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-11 | Breakout Equipment - Radial EPX Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-12 | Breakout Equipment - Radial EPX Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-13 | Breakout Equipment - Radial EPX Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-14 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-15 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-16 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-17 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-18 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-19 | Breakout Equipment - Radial EPX Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-2 | Breakout Equipment - Radial EPX Connectors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-20 | BREAKOUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-21 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-22 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-23 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-24 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-25 | BREAKOUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-26 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-27 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-28 | BREAKOUT EQUIPMENT - | 1 | |
| K24003-3 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-4 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-5 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-6 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-7 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-8 | BREAKOUT EQUIPMENT - RADIALL EPX CONNECTORS, MULTIPURPOSE (POWER PANELS, P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-9 | BREAKOUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24003-XX | Breakout Equipment -Radiall Epx Connectors. Multipurpose (Power Panels. P100/150/200/300/400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24004 | BREAKOUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24004-1 | BREAKOUT EQUIPMENT | 2 | |
| K24007-1 | Breakout Box Equipment - CMSC | 2 | |
| K24007-2 | BREAKOUT BOX EQUIPMENT | 1 | |
| K24007-3 | BREAKOUT BOX EQUIPMENT -MOTOR CONTROLLERS | 1 | |
| K24007-82 | Breakout Box Equipment - RFMC | 2 | |
| K24008-1 | Breakout Equipment - Remote Power Distribution Uni | 2 | |
| K24008-109-REVE-1UPGR | BREAKOUT EQUIPMENT - REMOTE POWER DISTRIBUTION UNITS | 1 | |
| K24011-47 | DISPATCH EQUIPMENT - HYDRAULIC SPOILER ACTUATO OUTBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K24012-1 | DISPATCH EQUIPMENT - APU STARTER GENERATOR (ASG) | 6 | |
| K24013-1 | Breakout Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K25002 | Adapter Equipment -Overhead Flight Attendant Rest | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K25002-1 | LIFT EQUIPMENT- OFAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K25002-139 | LIFTING EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR)/ OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL/ INSTALLATION (CE) | 5 | |
| K25003-1 | LIFTING EQUIPMENT- U | 7 | |
| K25005-1 | DOLLY EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST(OFAR)/OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL/INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K25005-125 | DOLLY EQUIPMENT - OFAR/OFCR MODULE REMOVAL/INSTALLATION | 8 | |
| K26001 | TEST EQUIPMENT -0 FIRE EXT TUBING, CARGO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K26001-1 | TEST EQUIPMENT | 3 | |
| K26001-20 | Test equipment-fire ext tubing，cargo compartment | 4 | |
| K26001-23 | TEST EQUIPMENT | 6 | |
| K26003 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K26003-1 | Test Equipment - Engine Fire Extinguishing System | 1 | |
| K26003-2 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K26003-35 | TEST EQUIPMENT ENGINE FIRE EXTINGUISHER | 2 | |
| K26003-36 | TEST EQUIPMENT-ENGIN | 6 | |
| K26003-64 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 1 | |
| K26003-65 | Test Equipment - Engine Fire Extinguishing System | 2 | |
| K26003-77 | TEST EQUIPMENT ENGINE FIRE EXTINGUISHER | 2 | |
| K26003-78 | TEST EQUIPMENT –ENGINE FIRE EXTINGUISHER SYSTEM ( | 5 | |
| K26003-83 | TEST EQUIPMENT - ENGINE FIRE EXTINGUISHING SYSTEM | 4 | |
| K27001 | REMOVAL/INSTALLATION EQUIPMENT-LE/TE PDU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27001-1 | Removal/Installation Equipment LE/TE Power Drive U | 1 | |
| K27001-100 | Removal / Instl Equipment - Leading Edge / Trailing Edge Power Drive Units | 1 | |
| K27001-126 | REMOVAL/INSTALLATION EQUIPMENT-LE/TE PDU/ | 4 | |
| K27002-83 | Adapter Equipment - TE Geared Rotary Actuator | 1 | |
| K27002-85 | ADAPTER EQUIPMENT - TE GEARED ROTARY ACTUATOR | 9 | |
| K27003-1 | ADAPTER EQUIPMENT | 8 | |
| K27004 | HOIST EQUIPMENT - REMOVAL / INST'L RUDDER POWER CO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27004-143 | Hoist Equipment -Removal And Installation. Rudder Power Control Unit (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27004-156 | HOIST EQUIPMENT - REMOVAL AND INSTALLATION, RUDDER POWER CONTROL UNIT (CE) | 6 | |
| K27004-157 | HOIST EQUIPMENT | 5 | |
| K27004-158 | HOIST EQUIPMENT - REMOVAL AND INSTALLATION, RUDDER POWER CONTROL UNIT | 6 | |
| K27005-63 | Removal/Installation Equipment -Elevator Power Control Unit (Ce) | 1 | |
| K27006 | REMOVAL/INSTALLATION EQUIPMENT -0 SPOILER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27006-1 | Removal/installation equipment-spoiler electric motor actuator | 7 | |
| K27007 | DRIVE ADAPTER EQUIPMENT - ACTUATOR HORIZONTAL STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27007-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR, HORIZONTAL STABILIZER TRIM | 8 | |
| K27008 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-10 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-11 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-12 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-13 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-14 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-2 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-21 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-22 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-23 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-24 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-25 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-26 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-27 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-3 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-33 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-37 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-4 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-41 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-42 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-43 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-44 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-45 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-48 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-49 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-5 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-50 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-51 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-57 | Sling Equipment -Removal/Installation. Aileron (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-60 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-61 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27008-67 | SLING EQUIPMENT - REMOVAL/INSTALLATION, AILERON (CE) | 4 | |
| K27008-69 | SLING EQUIPMENT-REMOVAL/INSTALLATION,AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27009-124 | Removal/Installation Equipment -Flaperon (Ce) | 5 | |
| K27010-104 | Removal/Installation Equipment | 4 | |
| K27010-99 | Remove/Install Equipment -High Lift Hydraulic Control Unit (Ce) | 3 | |
| K27011-1 | Dispatch Equipment - Hydraulic Spoiler Actuators | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27011-32 | DISPATCH EQUIPMENT- | 8 | |
| K27011-33 | DISPATCH EQUIPMENT - HYDRAULIC SPOILER ACTUATORS | 11 | |
| K27011-33 | DISPATCH EQUIPMENT - HYDRAULIC SPOILER ACTUATORS, OUTBOARD | 11 | |
| K27011-47 | DISPATCH EQUIPMENT | 10 | |
| K27011-48 | DISPATCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27011-49 | DISPATCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27014-38 | Gap Gauge Equipment - Spoiler to Flap Clearance | 9 | |
| K27017 | LOCK EQUIPMENT - INB'D / OUTB'D SPOILER ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-1 | Lock Equipment - Spoiler Hydraulic Actuator | 1 | |
| K27017-10 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-12 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-14 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-15 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-16 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-17 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-18 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-2 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-22 | LOCK EQUIPMENT - SPOILER HYDRAULIC ACTUATORS | 9 | |
| K27017-3 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-36 | LOCK EQUIPMENT- SPOL | 4 | |
| K27017-46 | LOCK EQUIPMENT- SPOILER | 7 | |
| K27017-46 | LOCK EQUIPMENT-SPOILER HYDRAULICACTUATORS | 7 | |
| K27017-6 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-7 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27017-9 | LOCK EQUIPMENT-SPOILER HYDRAULIC ACTUATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019 | LOCK EQUIPMENT - FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019-1 | Lock Equipment -Trailing Edge Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019-56 | LOCK EQUIPMENT- TRAI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019-66 | LOCK EQUIPMENT TRAILING EDGE FLAP | 1 | |
| K27019-70 | Lock Equipment - Trailing Edge Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019-82 | LOCK EQUIPMENT - TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27019-83 | LOCK EQUIPMENT - TRAILING EDGE FLAP (CE) | 5 | |
| K27019-84 | Lock Equipment - TE Flap | 3 | |
| K27019-85 | LOCK EQUIPMENT - TRAILING EDGE FLAP | 4 | |
| K27021-1 | EQUIPMENT - HOIST, HORIZONTAL STABILIZER TRIM ACTUATOR | 8 | |
| K27022 | RIGGING EQUIPMENT-FLAPERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27022-1 | Rigging Equipment -Flaperon | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27022-39 | Rig Equipment - Flaperon | 6 | |
| K27023 | SLING EQUIPMENT - EL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-11 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-12 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-16 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-17 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-2 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-20 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-28 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-3 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-38 | Sling Equipment -Elevator Removal/Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-4 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-42 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION (CE) | 1 | |
| K27023-47 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-48 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-49 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-5 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-50 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-53 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-57 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-59 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-60 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-61 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-64 | SLING EQUIPMENT - ELEVATOR REMOVAL/INSTALLATION | 7 | |
| K27023-7 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-8 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023-9 | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27023PLD | SLING EQUIPMENTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27024 | SLING EQUIPMENT -0 INBOARD TE FLAP, REMOVAL AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27024-21 | Sling Equipment -Inboard Trailing Edge Flap. Removal And Installation (Ce) | 1 | |
| K27024-25 | SLING EQUIPMENT | 1 | |
| K27024-30 | SLING EQUIPMENT, INBOARD TE FLAP, REMOVAL/INSTALLATION | 2 | |
| K27024-30-REVD | SLING EQUIPMENT - INBOARD TE FLAP REMOVAL AND INSTALLATION | 1 | |
| K27024-59 | SLING EQUIPMENT - INBOARD TRAILING EDGE FLAP, REMOVAL AND INSTALLATION (CE) | 6 | |
| K27025 | SLING EQUIPMENT- OUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27025-21 | Sling Equipment -Outboard Trailing Edge Flap. Removal And Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27025-25 | SLING EQUIPMENT - OUTBOARD TRAILING EDGE FLAP, REMOVAL AND INSTALLATION (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27025-28 | SLING EQUIPMENT - OUTBOARD TE FLAP, REMOVAL/INSTALLATION | 7 | |
| K27027 | SLING EQUIPMENT - RE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27027-175 | Sling Equipment -Removal/Installation. Inboard And Outboard Slats (Ce) | 1 | |
| K27027-207 | SLING EQUIPMENT- REM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27027-211 | SLING EQUIPMENT - REMOVAL/INSTALLATION, INBOARD AND OUTBOARD SLATS (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27027-214 | SLING EQUIPMENT - REMOVAL/INSTALLATION, INBOARD AND OUTBOARD SLATS (CE) | 6 | |
| K27029-1 | EXTENDER BREAKOUT EQUIPMENT - FLIGHT CONTROL ELECTRONICS UNIT (FCEU) | 2 | |
| K27030-1 | Revolution Counter Equipment | 7 | |
| K27030-2 | Revolution Counter Equipment And Adapter Equipment | 1 | |
| K27030-95 | REVOLUTION COUNTER EQUIPMENT AND ADAPTER EQUIPMENT | 8 | |
| K27032-1 | Pin Puller Equipment -Drive Link. Outboard Trailing Edge Flap | 7 | |
| K27035-1 | Support Equipment - Flaperon | 2 | |
| K27036-1 | WRENCH EQUIPMENT - ECCENTRIC BUSHING ADJUSTMENT, TRAILING EDGE FLAPS | 7 | |
| K27037 | RIGGING EQUIPMENT - LEADING EDGE SLAT INT'L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27037-1 | Equipment - Rigging, Leading Edge Slat Installatio | 3 | |
| K27037-47 | RIGGING EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27037-48 | RIGGING EQUIPMENT - | 2 | |
| K27037-72 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27037-76 | EQUIPMENT - RIGGING | 3 | |
| K27037-77 | RIGGING EQUIPMENT - LEADING EDGE SLAT INSTALLATION | 4 | |
| K27037-78 | Rigging Equipment | 7 | |
| K27037-84 | EQUIPMENT - RIGGING, LEADING EDGE SLAT INSTALLATION | 3 | |
| K27039-1 | RIGGING EQUIPMENT - TRAILING EDGE FLAPS | 4 | |
| K27039-1-REVA | RIGGING EQUIPMENT - TE FLAPS | 1 | |
| K27039-15 | RIGGING EQUIPMENT - TRAILING EDGE FLAPS | 3 | |
| K27039-16 | RIGGING EQUIPMENT - TRAILING EDGE FLAPS | 2 | |
| K27040 | CLAMP EQUIPMENT DRIVE SHAFT TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27040-1 | Clamp Equipment - Drive Shaft, TE Flap and LE Slat | 8 | |
| K27042 | CLAMP EQUIPMENT - LEADING EDGE SLAT DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27044-1 | SUPPORT EQUIPMENT - AILERON | 6 | |
| K27046-15 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 5 | |
| K27046-21 | LOCK EQUIPMENT RUDDE | 1 | |
| K27046-31 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 2 | |
| K27046-42 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT | 4 | |
| K27046-51 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT | 5 | |
| K27047-1 | REMOVAL/INSTALLATION EQUIPMENT - SPOILERS AND FLAPERON HINGE PANELS (CE) | 7 | |
| K27048 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27048-1 | DISPATCH EQUIPMENT - | 9 | |
| K27048-1-REVD | DISPATCH EQUIPMENT - HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| K27048-10 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27048-14 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27048-2 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27048-4 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27048-9 | DISPATCH EQUIPMENT-HORIZONTAL STABILIZER TRIMACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27049-1 | Hoist Equipment- Electronic Motor Control Unit, HSTA | 2 | |
| K27049-54 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 1 | |
| K27049-78 | HOIST EQUIPMENT - EL | 1 | |
| K27049-88 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| K27049-90 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR | 1 | |
| K27049-91 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR | 2 | |
| K27049-95 | HOIST EQUIPMENT | 3 | |
| K27050-1 | RIGGING EQUIPMENT - | 1 | |
| K27050-14 | RIGGING EQUIPMENT - | 7 | |
| K27052-1 | REMOVAL/INSTALLATION EQUIPMENT - TORQUE TUBE, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27056-1 | Support Equipment - Elevator PCU | 1 | |
| K27056-176 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-177 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT | 2 | |
| K27056-50 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-63 | REMOVAL/INSTALLATION EQUIPMENT -ELEVATOR POWER CONTROL UNIT (CE) | 1 | |
| K27059 | DISPATCH EQUIPMENT-SPOILER ELECTRO MECHANICAL ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27059-1 | DISPATCH EQUIPMENT - SPOILER ELECTRO MECHANICAL AC | 7 | |
| K27059-12 | DISPATCH EQUIPMENT | 2 | |
| K27059-18 | DISPATCH EQUIPMENT - SPOILER ELECTRO MECHANICAL A | 10 | |
| K27059-20 | DISPATCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27059-21 | DISPATCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27060-1 | CLAMP EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27060-21 | CLAMP EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K27061-1 | LOCK-OUT EQUIPMENT - SPOILER ELECTRO MECHANICAL ACTUATOR (CE) | 9 | |
| K28003-1 | Defueling Fitting Equipment -Main And Override Pump | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K28004-1 | TEST EQUIPMENT - LEA | 4 | |
| K28004-30 | TEST EQUIPMENT - LEAK AND PRESSURE, APU FUEL LINE | 6 | |
| K28005-1 | EQUIPMENT - TEST, VACUUM PRESSURE RELIEF VALVE | 8 | |
| K29001-1 | Adapter Equipment -Electric Motor Pump Removal/ Installation (Ce) | 3 | |
| K29001-60 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 7 | |
| K29002-1 | REMV'L & INST'L EQUIPMENT - RAM AIR TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K29002-78 | Removal/Installation Equipment. Ram Air Turbine (Ce) | 5 | |
| K30001-1 | Breakout Equipment -Wing. Translating Wire Bundle (Wips/Skew. In-Line) | 2 | |
| K32 | Flexigun Grease Gun K32 LUBRICATION EQUIPMENT | 3 | |
| K32001 | SLING EQUIPMENT - RE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32001-1 | SLING EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (CE) | 10 | |
| K32002 | PROTECTOR EQUIPMENT-AXLE AND THREAD,NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32002-1 | Protector Equipment -Axle And Thread. Nose Landing Gear | 16 | |
| K32002-1 | PROTECTOR EQUIPMENT-AXLE&THREAD,NLG | 16 | |
| K32002-1? | PROTECTOR EQUIPMENT-AXLE | 16 | |
| K32002-2 | PROTECTOR EQUIPMENT | 7 | |
| K32002-3 | PROTECTOR EQUIPMENT | 7 | |
| K32002-5 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32002-6 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32002-7 | PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32003-1 | EQUIPMENT - REMOVAL/INSTALLATION, MLG UPLOCKING/MLG DOOR UPLOCK SPRING | 3 | |
| K32004-1 | Removal/Installation Equipment -Fuse Pin. Main Landing Gear Forward Trunnion Support | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32004-17 | REMOVAL/INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 1 | |
| K32004-18 | REMOVAL/INSTALLATION EQUIPMENT - FUSE PIN, MAIN LANDING GEAR FORWARD TRUNNION SUPPORT | 3 | |
| K32005-1 | PULLER EQUIPMENT - PIN RETRACT ACTUATOR ROD END ML | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32006-1 | Hoist Adapter Equipment | 4 | |
| K32007 | SPRING REMV'L / INST'L EQUIPMENT - DRAG BRACE MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32007-1 | Equipment - Removal/Installation, MLG Drag Brace Springs | 6 | |
| K32008-241 | ELECTRICAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32009-1 | PULLER EQUIPMENT - TRUNNION PIN, NOSE LANDING GEAR ASSEMBLY AND NOSE LANDING GEAR UPPER DRAG BRACE | 3 | |
| K32009-25 | Puller Equipment -Trunnion Pin. Nose Landing Gear Assembly And Nose Landing Gear Upper Drag Brace | 4 | |
| K32011-1 | Replacement Equipment -Lower Bearing Seals. Main Landing Gear (Mlg) | 2 | |
| K32011-56 | REPLACEMENT EQUIPMEN | 2 | |
| K32011-63 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| K32011-64 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-90 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| K32011-91 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN | 4 | |
| K32012 | HOIST EQUIPMENT-RMVL/INSTL,NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32012-1 | Hoist Equipment -Removal/Installation. Nose Landing Gear (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32012-77 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, NOSE LANDING GEAR (CE) | 1 | |
| K32012-98 | Hoist Equipment | 5 | |
| K32013-1 | REMOVAL/INSTALLATION EQUIPMENT -RETRACT ACTUATOR. NOSE LANDING GEAR (CE) | 1 | |
| K32013-24 | EQUIPMENT - REMOVAL/INSTALLATION, NOSE LANDING GEAR RETRACT ACTUATOR | 5 | |
| K32014 | REMOVAL/INSTALLATION EQUIPMENT-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32014-1 | Removal;/installation equipment-MLG | 4 | |
| K32015-1 | REPLACEMENT EQUIPMENT - LOWER SEALS, NOSE LANDING GEAR | 4 | |
| K32017-1 | BUILD-UP EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32017-164 | BUILD-UP EQUIPMENT - TRUCK BEAM, MAIN LANDING GEAR | 3 | |
| K32018-35 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32018-42 | ADJUSTMENT EQUIPMENT | 1 | |
| K32018-59 | SIDE STRUT ADJUSTING EQUIPMENT - DRAG STRUT LOCK LINK ASSEMBLY, MAIN LANDING GEAR | 2 | |
| K32019 | SLING EQUIPMENT-DRAG AND SIDE BRACE RMVL/INSTL,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32019-1 | Equipment-Sling MLG Drag and Side Strut Removal/Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32019-64 | SLING EQUIPMENT - DR | 3 | |
| K32019-91 | SLING EQUIPMENT - DRAG AND SIDE BRACE REMOVAL/INSTALLATION | 5 | |
| K32020 | RETAINER EQUIPMENT - MLG / NLG TORSION LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-1 | EQUIPMENT - RETAINER, LANDING GEAR TORSION LINK | 8 | |
| K32020-13 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-14 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-2 | RETAINER EQUIPMENT | 2 | |
| K32020-26 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-27 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-29 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 8 | |
| K32020-4 | RETAINER EQUIPMENT | 2 | |
| K32020-5 | RETAINER EQUIPMENT | 1 | |
| K32020-6 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-8 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32020-9 | RETAINER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32021-1 | DISPATCH EQUIPMENT | 12 | |
| K32023-1 | SHOCK STRUT EQUIPMEN | 4 | |
| K32024-1 | SHOCK STRUT EQUIPMEN | 4 | |
| K32025-1 | REMOVAL/INSTALLATION EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR DOOR (CE) | 4 | |
| K32026 | LOCATING EQUIPMENT-U | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32026-1 | Locating Equipment | 3 | |
| K32028-1 | "WRENCH EQUIPMENT - LANDING | 8 | |
| K32030 | SLING EQUIPMENT - HANDLING NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K32030-1 | SLING EQUIPMENT - HANDLING, NOSE LANDING GEAR | 4 | |
| K32030-2 | SLING EQUIPMENT - HANDLING | 1 | |
| K32031-1 | Puller Equipment -Bushing. Main Landing Gear Bogie Beam | 2 | |
| K32031-11 | PULLER EQUIPMENT - BUSHING, MAIN LANDING GEAR BOGIE BEAM | 2 | |
| K32033-1 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 3 | |
| K32035 | REMOVAL EQUIPMENT - MLG BOGIE PIVOT PIN | 2 | |
| K32035-1 | REMOVAL AND INSTALLATION EQUIPMENT - MAIN LANDING GEAR BOGIE PIVOT PIN | 7 | |
| K32035-11 | REMOVAL AND INSTALLATION EQUIPMENT - MAIN LANDING GEAR BOGIE PIVOT PIN | 8 | |
| K32036-1 | DISPATCH EQUIPMENT - | 9 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 7 | |
| K32036-21 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 7 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: ADAPTER SIMULATOR ASSY -4 IDENTIFIED AS ORAN | 7 | |
| K32036-3 | DISPATCH EQUIPMENT - AXLE RDC | 3 | |
| K32036-36 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 5 | |
| K32037-1 | Protector Equipment Axle Main | 9 | |
| K32038 | PULLER EQUIPMENT - WHEEL SLEEVE, MAIN LANDING GEAR AXLE (CE) | 1 | |
| K32038-1 | PULLER EQUIPMENT - W | 1 | |
| K32038-59 | Equipment - Puller, Brake Sleeve | 1 | |
| K32038-62 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES (CE) | 6 | |
| K32038-63 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES | 1 | |
| K32039-1 | PULLER EQUIPMENT - GOODRICH BRAKES, MAIN LANDING GEAR | 5 | |
| K32040-1 | SLING EQUIPMENT - DRAG AND SIDE BRACE REMOVAL/INSTALLATION, MAIN LANDING GEAR (CE) | 1 | |
| K32040-73 | SLING EQUIPMENT - DRAG AND SIDE BRACE REMOVAL/INSTALLATION, MAIN LANDING GEAR (CE) | 1 | |
| K32040-81 | SLING EQUIPMENT | 8 | |
| K32040-89 | SLING EQUIPMENT - DRAG AND SIDE BRACE REMOVAL/INSTALLATION, MAIN LANDING GEAR | 1 | |
| K32042-1 | PULLER EQUIPMENT - WHEEL SLEEVE, MAIN LANDING GEAR AXLE (CE) | 6 | |
| K32043-1 | EQUIPMENT - GAG, MLG STRUT | 1 | |
| K32043-2 | EQUIPMENT - GAG, MLG STRUT (CE) | 1 | |
| K32046-1 | SLING EQUIPMENT - SEMI-LEVER GEAR SLG ACTUATOR | 3 | |
| K35001 | Test Equipment - Flow Fuse, Crew Oxygen Distributi | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K35001-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K35001-100 | Test Equipment - Flow Fuse, Crew Oxygen Distribution Manifold | 1 | |
| K35001-115 | TEST EQUIPMENT | 7 | |
| K35001-116 | TEST EQUIPMENT - FLOW FUSE, CREW OXYGEN DISTRIBUTION MANIFOLD | 2 | |
| K35001-19 | TEST EQUIPMENT - FLOW FUSE, CREW OXYGEN DISTRIBUTION MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K38001-1 | Removal/Installation Equipment -Vacuum Waste Tanks | 7 | |
| K38002-1 | DISPATCH EQUIPMENT- PLUG, VACUUM WASTE TOILET BOWL | 10 | |
| K38003-1 | LEAK TEST EQUIPMENT POTABLE WATER | 3 | |
| K42001 | BREAKOUT BOX EQUIPMENT -0 RDC CONNECTORS, LINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K42001-1 | BREAKOUT EQUIPMENT | 2 | |
| K42002 | BREAKOUT BOX EQUIPMENT -0 NETWORK SWITCH, REMOTE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K42002-1 | Breakout Box Equipment - Network Switch, Remote (A | 1 | |
| K42003-1 | BREAKOUT EQUIPMENT - COMMON COMPUTING RESOURCE (CCR) CABINET (AVIONICS FULL DUPLEX SWITCHED ETHERNET (AFDX)/ POWER IN-LINE) | 2 | |
| K45001-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT -MAINTENANCE LAPTOP (WIREDWIRELESS CONFIGURATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K45003-1 | GROUND SUPPORT EQUIPMENT (GSE) KIT - MAINTENANCE LAPTOP (WINDOWS 7) | 3 | |
| K46001 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-1 | Breakout Equipment | 2 | |
| K46001-2 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-3 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-4 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-40 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-41 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-42 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-54 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-55 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-6 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-60 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-65 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-66 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-75 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-77 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-88 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-89 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46001-90 | BREAKOUT EQUIPMENT-CORE NETWORK CABINET(IN-LINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K46002-1 | FIBER OPTIC BREAKOUT EQUIPMENT - MISCELLANEOUS CONNECTORS, FIBER OPTIC TRANSCEIVER (FOX) / GRAPHICS GENERATOR (GG) | 4 | |
| K47001 | REMOVAL/INSTALLATIONEQUIPMENT-NGSAIRSEPARATIONMODULE | 1 | |
| K47001-1 | Equipment - Removal/Installation, NGS Air Separati | 3 | |
| K47001-10 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-116 | REMOVAL/INSTALLATIONEQUIPMENT-NGS AIPSEPARATION MODULE | 7 | |
| K47001-15 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-16 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-2 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-27 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-28 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-3 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-31 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-34 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-35 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-36 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-39 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-4 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-47 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-5 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-50 | REMOVAL/INSTALLATION EQUIPMENT | 1 | |
| K47001-53 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-55 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-56 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-57 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-6 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-61 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-62 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-63 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-64 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-65 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-66 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-67 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-7 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-71 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-73 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-75 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-76 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-77 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-8 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-82 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-83 | REMOVAL/INSTALLATION EQUIPMENT | 1 | |
| K47001-88 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-89 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-90 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47001-92 | REMOVAL/INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-12 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-2 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-35 | Leak Check Equipment | 3 | |
| K47002-36 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-37 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-38 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47002-41 | LEAK CHECK EQUIPMENT | 1 | |
| K47002-7 | LEAK CHECK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-1 | EQUIPMENT-NGS MOTOR DRIVENCOMPRESSOR REMOVAL AND LNSTALLATION | 9 | |
| K47003-10 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-14 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-15 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-16 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-18 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-19 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-2 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-20 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-21 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-22 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-25 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-26 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-27 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-3 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-4 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K47003-9 | EQUIPMENT-NGS MOTOR DRIVEN COMPRESSOR REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K49001-1 | THREAD PROTECTOR EQUIPMENT - APU RETENTION BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K49001-7 | THREAD PROTECTOR EQUIPMENT - APU RETENTION BOLTS | 6 | |
| K49002-1 | SLING EQUIPMENT - APU STARTER GENERATOR (ASG) | 6 | |
| K49003 | APU Dispatch Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K49003-1 | DISPATCH EQUIPMENT - APU REMOVED | 3 | |
| K49004-1 | HOIST EQUIPMENT - APU REMOVAL/INSTALLATION | 6 | |
| K49004-3 | HOIST EQUIPMENT – APU REMOVAL/INSTALLATION | 1 | |
| K49004-5 | HOIST EQUIPMENT – APU REMOVAL/INSTALLATION | 1 | |
| K51001 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K51001-1 | Static Balance Equipment -Flight Control Surfaces | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K51001-56 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K51001-62 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| K51004-1 | BOND TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52002-133 | BARRIER, LOCKING ARM EQUIPMENT - PASSENGER ENTRY D | 5 | |
| K52002-2 | Locking Arm Equipment- Barrier, Passenger Entry Doors | 1 | |
| K52002-66 | Frame Equipment- Barrier, Passenger Entry Doors | 1 | |
| K52002-67 | Frame Equipment- Barrier, Passenger Entry Doors | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52002-90 | BARRIER, LOCKING ARM EQUIPMENT - PASSENGER ENTRY D | 4 | |
| K52004 | SLING EQUIPMENT - DOOR HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005 | HOLD OPEN EQUIPMENT - PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-1 | Hold-Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-100 | Hold Open Equipment | 6 | |
| K52005-13 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-19 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-30 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-32 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-37 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-42 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-43 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-44 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-45 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-49 | HOLD OPEN EQUIPMENT | 1 | |
| K52005-60 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-61 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-64 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-66 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-68 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-69 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-70 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-72 | HOLD OPEN EQUIPMENT-PASSENGER ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52005-85 | Hold Open Equipment - Passenger Entry Door | 3 | |
| K52005-97 | Hold open equipment-passenger entry door | 1 | |
| K52005-99 | Hold Open Equipment - Passenger Entry Door | 2 | |
| K52006 | SLING EQUIPMENT - BULK CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52006-1 | Removal/Installation Equipment -Bulk Cargo Door (Ce) | 2 | |
| K52006-57 | REMOVAL/INSTALLATION EQUIPMENT - BULK CARGO DOOR | 2 | |
| K52008 | REMV'L & INST'L EQUIPMENT - MLG DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52008-1 | Removal/Installation Equipment -Main Landing Gear Door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52008-175 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR DOOR (CE) | 1 | |
| K52008-176 | REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52008-233 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR DOOR (CE) | 2 | |
| K52008-241 | REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR DOOR | 2 | |
| K52012 | TEST EQUIPMENT - LATCH BLOWOUT DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52012-1 | TEST EQUIPMENT - LATCH ASSEMBLY, BLOWOUT DOORS | 3 | |
| K52015 | SLING EQUIPMENT - DOOR HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52015-1 | Sling Equipment - Door Handling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52015-23 | Sling Equipment - Large Cargo Door Instl Rmvl | 7 | |
| K52021 | COMPRESSION EQUIPMENT - BULK CARGO DOOR SPRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52024-1 | SLING EQUIPMENT - DOOR HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52024-29 | SLING EQUIPMENT - DOOR HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52024-69 | SLING EQUIPMENT - PASSENGER DOOR, REMOVAL/INSTALLATION | 8 | |
| K52033-1 | INSTALLATION EQUIPMENT - PASSENGER ENTRY DOOR VENT FLAP SEAL | 1 | |
| K52033-83 | INSTALLATION EQUIPMENT - PASSENGER ENTRY DOOR VENT FLAP SEAL | 3 | |
| K52036-1 | DRILLING EQUIPMENT - HINGE COLUMN ASSEMBLY, PASSENGER ENTRY DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52037-15 | INSTALLATION EQUIPMENT- WINDOW EDGE PROTECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52041-1 | Rigging Equipment -Large Cargo Door Vent Door Closed Position | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52045-1 | SPRING COMPRESSION EQUIPMENT - LATCH PROBE INSTALLATION, BULK CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K52047-1 | ROLLER GUIDE ADJUSTMENT TOOL - ELECTRIC EQUIPMENT ACCESS DOORS | 3 | |
| K52049-1 | FILL AND BLEED EQUIPMENT - LARGE CARGO DOOR | 3 | |
| K52051-1 | Proof load equipment-rem/inst eqpt MLG door | 2 | |
| K53001-1 | PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 2 | |
| K53001-151 | PLATFORM EQUIPMENT - PRESSURE BULKHEAD ACCESS | 2 | |
| K53002-31 | Removal/Installation Equipment -Radome (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K53002-34 | REMOVAL/INSTALLATION EQUIPMENT - RADOME | 2 | |
| K53002-38 | Removal/Installation Equipment | 1 | |
| K53002-51 | REMOVAL/INSTALLATION EQUIPMENT - RADOME | 3 | |
| K53003 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN (BASE ASSY AND LADDER ASSY) | 2 | |
| K53003-1 | Ladder Equipment - Empennage Access, Vertical Fin | 1 | |
| K53003-34 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS | 5 | |
| K53003-37 | LADDER EQUIPMENT | 3 | |
| K53003-38 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN | 3 | |
| K53003-39 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K53003-51 | Ladder equipment-empennage access ，vertical fin | 8 | |
| K53004-1 | ACCESS LADDER EQUIPMENT - HORIZONTAL STABILIZER | 1 | |
| K53004-137 | ACCESS LADDER EQUIPMENT - HORIZONTAL STABILIZER | 2 | |
| K53004-54 | ACCESS LADDER EQUIPMENT - HORIZONTAL STABILIZER | 3 | |
| K53007-1 | PLATFORM EQUIPMENT - PASSENGER FLOOR PANEL SUPPORT | 5 | |
| K54001 | EQUIPMENT - REMOVAL / INSTALLATION AFT STRUT FAIRI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K54001-1 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 2 | |
| K54001-100 | Rem/Instal Equipment - Aft Strut Fairing | 7 | |
| K54001-111 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 8 | |
| K54001-137 | R/I EQUIPMENT | 1 | |
| K54003 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD ENGINE ON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K54003-1 | SLING EQUIPMENT - STRUT FUSE PIN UNLOAD, ROLLS-ROYCE ENGINE | 2 | |
| K54004 | SLING EQUIPMENT - REMOVAL / INSTALLATION ENGINE ST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K54004-43 | Sling Equipment -Removal/Installation. Engine Pylon (Ce) | 5 | |
| K54006-1 | Locating Jig Equipment -Side Link Hole Centers | 2 | |
| K54007-1 | SLING EQUIPMENT - STRUT UNLOAD, GE ENGINE (CE) | 2 | |
| K5429071 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K5429072 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K5429074 | TEST EQUIPMENT CABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K5429081 | TEST EQUIPMENT CABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55001 | JACKING EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55001-1 | JACKING EQUIPMENT-HORIZONTAL STABILIZER | 4 | |
| K55001-55 | JACKING EQUIPMENT-HORIZONTAL STABILIZER | 2 | |
| K55002-2 | Equipment - Load Application, Horizontal Stabilize | 4 | |
| K55002-46 | EQUIPMENT - LOAD APPLICATION, HORIZONTAL STABILIZER | 6 | |
| K55003-1 | REMOVAL/INSTALLATION EQUIPMENT - HINGE PIN, HORIZONTAL STABILIZE | 3 | |
| K55004 | BEARING EQUIPMENT - HORIZONTAL STABILIZER REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55005 | SLING EQUIPMENT - REMOVAL / INSTALLATION VERTICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55005-1 | SLING EQUIPMENT - REMOVAL/INSTALLATION, VERTICAL FIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55005-87 | SLING EQUIPMENT - REMOVAL/INSTALLATION, VERTICAL FIN (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55006-1 | Reaction Fixture Equipment -Torque Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55006-125 | REACTION FIXTURE EQUIPMENT - TORQUE TOOL | 7 | |
| K55006-73 | REACTION FIXTURE EQUIPMENT - TORQUE TOOL | 8 | |
| K55006-74 | Reaction Fixture Equipment - Torque Tool | 2 | |
| K55006-75 | REACTION FIXTURE EQUIPMENT - TORQUE TOOL | 7 | |
| K55007-73 | REACTION FIXTURE EQUIPMENT - TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K55008-151 | Foot Equipment | 10 | |
| K7 | GREASE EQUIPMENT. MINILUBE MACNAUGHT K7 | 4 | |
| K71001-130 | BOOTSTRAP EQUIPMENT - ENGINE CHANGE KIT -GE CE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71002-116 | Bootstrap Equipment - Engine Change Kit -Rolls-Royce (Ce) | 2 | |
| K71002-147 | ENGINE CHANGE KIT (RR), INCLUDES BOOTSTRAP, T/R HOLD-OPEN, AND TORQUE EQUIPMENT | 2 | |
| K71002-148 | ENGINE CHANGE KIT (RR), INCLUDES BOOTSTRAP, T/R HOLD-OPEN, AND TORQUE EQUIPMENT | 7 | |
| K71003-1 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71003-65 | Proof load fixture adapter-bootstrap equipment | 3 | |
| K71003-73 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71003-79 | Proof load fixture adapter-bootstrap equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71003-80 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71003-86 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71003-87 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 3 | |
| K71004-1 | Transportation Equipment -Engine Mount Stabilization. Ge | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71004-34 | TRANSPORTATION EQUIPMENT - ENGINE MOUNT STABILIZATION, GE | 2 | |
| K71005-1 | Transportation Equipment -Engine Mount Stabilization. Rolls Royce | 5 | |
| K71006-20 | HOIST EQUIPMENT - EN | 6 | |
| K71007-1 | THREAD PROTECTOR EQUIPMENT - ENGINE MOUNT & THRUST LINK BOLTS, GENERAL ELECTRIC AND ROLLS ROYCE ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71008-1 | SLING EQUIPMENT - FAN COWL SUPPORT BEAM GE GEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K71008-37 | Sling Equipment -Fan Cowl Support Beam. Ge Genx (Ce) | 5 | |
| K78001-49 | EQUIPMENT - THRUST REVERSER CHANGE KIT (GENX-1B) - INCLUDES SLING AND HINGE BOLT | 7 | |
| K78001-58 | Thrust Reverser Open Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K78002-1 | SLING EQUIPMENT -THRUST REVERSER SLEEVE. GENX (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K78002-70 | SLING EQUIPMENT - THRUST REVERSER SLEEVE GENX | 9 | |
| K78003-100 | EQUIPMENT - THRUST REVERSER CHANGE KIT (RR) - INCLUDES SLING AND HINGE BOLT THREAD PROTECTORS | 7 | |
| K78003-95 | EQUIPMENT - THRUST REVERSER CHANGE KIT (RR) - INCLUDES SLING AND HINGE BOLT THREAD PROTECTORS | 2 | |
| K78004-1 | Sling Equipment -Removal/Installation. Fan Reverser Sleeve. Rolls-Royce Trent 1000 (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K78004-104 | SLING EQUIPMENT - RE | 6 | |
| K78005-22 | Hold Open Equipment -Hangar Maintenance. Rolls Royce Thrust Reverser | 9 | |
| K78009-1 | HOLD OPEN EQUIPMENT - HANGAR MAINTENANCE, GE THRUST REVERSER | 8 | |
| K78011-1 | HOLD OPEN EQUIPMENT - TRENT 1000 THRUST REVERSER (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K78011-59 | HOLD OPEN EQUIPMENT - TRENT 1000 THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K78012-1 | Equipment - Hold Open, Engine Uplift Loader (Genx- | 1 | |
| K78012-63 | HOLD OPEN EQUIPMENT - GENX-1B THRUST REVERSER | 2 | |
| K78012-85 | HOLD OPEN EQUIPMENT - GENX-1B THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KARCHER SC 3 EASYFIX - VAPOR | CLEANING EQUIPMENT - STEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KIT K32023-1 | "SHOCK STRUT EQUIPMENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KIT K32024-1 | SHOCK STRUT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KIT-LPA400X-RF | KIT WEIGHT AND BALANCE EQUIPMENT (0 -60000 LBS) | 1 | |
| KIT9851 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KS12 | COMPRESSOR EQUIPMENT KS12 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KS18 | COMPRESSOR EQUIPMENT KS18 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L134M2801101 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L1B51050AE05000 | ATEC 1 Avionics Automate Test Equipment / ATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L27001-1 | Check Equipment - Jackscrew Horz Stabilizer | 7 | |
| L28001-62 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| L32001-1 | OVERCENTER EQUIPMENT | 1 | |
| L79001-8 | TEST EQUIPMENT - PRESSURE SWITCH OIL FILTER | 1 | |
| LB063 | HANGER UNLOADING SPECIAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LJ232T8002-16 | EQUIPMENT INSTAL SEC 41 | 1 | |
| LL517A034 | LOCKING EQUIPMENT - CABLE TENSION REGULATOR | 1 | |
| LLA1007A011 | END FLOAT SETTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LLA537A204 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 3 | |
| LLA795A034 | Backlash Equipment | 1 | |
| LLA800A050 | BACKLASH EQUIPMENT | 1 | |
| LLA800A091 | RUNNING IN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LLA937A007 | TORQUE TIGHTENNING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LM9000 | HORIZONTAL DRIVE SHAFT COVER REMOVAL TOOL LM9000 GAS TURBINE SUPPORT EQUIPMENT ACCESSORY GEARBOX REPLACEMENT EFFECTIVITY: LM9000 GAS TURBINE MODELS MANUFACTURER: BAKER HUGHES MANUFACTURER DOCUMENT NUMBER: GEK133968 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LMT881 | ADAPTER FOR ENGINE CLEANING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LOC-FP-1 | SAR FILTER PANEL-1-PROTECTIVE BREATHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LPA 400 | WEIGHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LSU105-1 | AIR DATA TEST SET SWICH EQUIPMENT | 1 | |
| LTCT7558-01 | Fitting Assembly, Oil Flow Equipment | 1 | |
| LTCT7558-02 | Fitting Assembly, Oil Flow Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT7612-01 | MAINTENANCE EQUIPMENT, FOR AIRCRAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTS-525/A | LINAIRE TEST EQUIPMENT FOR KING KI525 AND KI525A H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M1-837 | EDDY CURRENT EQUIPMENT DEFECTOMETER | 1 | |
| M1-G-KIT | TESTER - BONDING EQUIPMENT | 6 | |
| M2 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M2400-5-100CS | WEIGHING EQUIPMENT AIRCRAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M3 | EDDY CURRENT EQUIPMENT ELOTEST | 4 | |
| M70 | RESONANCE FREQUENCY EQUIPMENT FBT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M7360D293 | ESD STATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M80L | RESONNANCE FREQUENCY EQUIPMENT FBT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA200001-60 | MAINTENANCE PLATFORM EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA240001-40 | R I EQUIPMENT, MAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA240002-64 | REMOVAL/INSTALLATION EQUIPMENT, APU BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA250001-1 | R/I EQUIPMENT, GALLEY AIR CHILLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA260001-90 | R/I EQUIPMENT, APU FIRE BOTTLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA260003-1 | TEST EQUIPMENT-FIRE EXTINGUISHER BOTTLE SQUIB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280004-1 | TEST EQUIPMENT-LEAK/PRESSURE, AERIAL REFUELING SYSTEM | 1 | |
| MA280004-99 | TEST EQUIPMENT, LEAK AND PRESSURE, APU SHROUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280008-1 | BOOM HOIST MOTOR R/I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280009-1 | ADAPTER EQUIPMENT - AERIAL REFUELING RECEPTACLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280010-1 | R/I EQUIPMENT, AR RECEPTACLE CRANJK ARM SPRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280011-53 | BOOM GIMBAL R/I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280012-104 | R/I EQUIPMENT- BOOM PIVOT DOOR SPRINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280012-78 | R/I EQUIPMENT- BOOM PIVOT DOOR SPRINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280013-144 | CDS HOSE REEL R/I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280019-253 | WARP AND PYLON R/I EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280025-95 | TEST EQUIPMENT - PRESSURE/LEAKAGE, BODY FUEL TANKS | 1 | |
| MA280032-1 | TELE-TUBE HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280034-1 | MECHANICAL EQUIPMENT - GIMBAL PULL UP | 1 | |
| MA280038-1 | LATCH RIGGING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280039-1 | TANK INSTALLATION EQUIPMENT, INSIDE PALLET | 1 | |
| MA280047-1 | TANK INSTALLATION EQUIPMENT, OUTSIDE PALLET GUIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280056-1 | BUNGEE LOCKOUT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280071-1 | DRAIN EQUIPMENT, HYDRAULIC PUMP, PRESSURE SENSOR LINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA280078-1 | DRAIN EQUIPMENT, HYDRAULIC PUMP, PRESSURE SENSOR LINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA310001-1 | FIBER OPTIC BREAKOUT EQUIPMENT-ARINC 600 CONNECTORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA520003-1 | RIGGING EQUIPMENT, RECEPTACLE DOOR TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA530003-114 | REMOVAL/INSTALL EQUIPMENT- PANORAMIC CAMERA FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MA710001-1 | SLING EQUIPMENT, FIXED FAN DUCT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MAC-1 | EQUIPMENT - VENTILATION, FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MASTERSCAN330 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBSS1-100 | EQUIPMENT TRANSPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC200002-1 | PROTECTIVE EQUIPMENT - FWD/AFT ENTRY DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC240002-1 | Hoist Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280002-1 | LOADER/TRANSPORT EQUIPMENT – AUX FUEL TANKS AND WEAPONS BAY DOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280002-2 | STAND-LOADER-TRANSPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280003-117 | HANDLING EQUIPMENT – REMOVAL/INSTALLATION AUXILIARY FUEL TANKS, SECTION 46 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280004-1 | SLING EQUIPMENT – STORAGE TRANSPORT, AUX FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280005-1 | TEST EQUIPMENT - PRESSURE/LEAKAGE, AERIAL REFUEL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280006-175 | TEST EQUIPMENT - PRESSURE/LEAKAGE/VACUUM, AUXILIARY FUEL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC280006-182 | TEST EQUIPMENT - PRESSURE/LEAKAGE/VACUUM, AUXILIARY FUEL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC360001-180 | HANDLING EQUIPMENT - REMOVAL/INSTL, AUX FUEL TANKS, SECTION 43 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC380001-1 | Sling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC520007-1 | Handling Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC530001-82 | GANTRY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC920002-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC960001-134 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, SONOBUOY ROTARY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC960002-6 | RI EQUIPMENT-WING PYLONS ADAPTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B01539-M | MECHANICAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B06709-1 | Mechanical Equipment -Work Platform. Leading Edge Fairings | 3 | |
| ME65B19128 | MECHANICAL EQUIPMENT FULCRUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B40000-1 | MECHANICAL EQUIPMENT, AIR CONDITIONING PACK INSTALLATION, PACKS 1, 2, AND 3 | 7 | |
| ME65B40136-1 | Mechanical Equipment -Pitot Static Probe | 3 | |
| ME65B40508-1 | APU BATTERY INSTALLATION AND REMOVAL EQUIPMENT | 3 | |
| ME65B50263 | EQUIPMENT - TEST, PRESSURE LEAK, PASSENGER OXYGEN SYSTEM (LOW PRESSURE) | 5 | |
| ME65B50263-1 | EQUIPMENT-TEST, PRESSURE LEAK,0-30PSI | 7 | |
| ME65B50263-2 | EQUIPMENT - TEST, PRESSURE LEAK, 0-60 PSI | 2 | |
| ME65B80713-1 | LOCK EQUIPMENT HST ACTUATOR BALL NUT | 7 | |
| ME809-143A1900-204 | Mechnical Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME814A2614-1 | MECHANICAL EQUIPMENT MAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MEC36001-1 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MG161 | EQUIPMENT-X-RAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MG161L | X-RAY EQUIPMENT DC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MH12-005 | WHEEL AND BRAKE CHANGE EQUIPMENT | 3 | |
| MH13-003 | WHEEL BRAKE CHANGE EQUIPMENT | 2 | |
| MIL-STD-865 | NICKEL PLATING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MINITEST2100 | MEASUREMENT EQUIPMENT, COATING THICKNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MINITEST3000 | MEASUREMENT EQUIPMENT, COATING THICKNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT002A0004-20 | MISCELLANEOUS TOOL THRUST REVERSER DESTRUCTIVE TEST EQUIPMENT | 1 | |
| MIT65B00772 | SAMPLING FUEL EQUIPMENT | 7 | |
| MIT65B01202-1 | WRENCH EQUIPMENT - WHEEL RETENTION NUT, MAIN LANDI | 10 | |
| MIT65B11030 | TEST EQUIPMENT - EMERGENCY POWER INSTALLATION, MAIN DOORS 1 THRU 5 | 9 | |
| MIT65B11030-1 | Test Equipment-Emergency Pwr Instl Main Drs 1-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B60127 | MISCELLANEOUS TOOL - EQUIPMENT INSTALLATION, RETRACTIVE WHEEL DRIVE, LOWER CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT65B90315 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 4 | |
| MIT69B62284 | Test Equipment | 7 | |
| MIT955Z1011MLG | EQUIPMENT | 3 | |
| MITBAC5730-2 | PLAPPER PEENING EQUIPMENT KIT (CONTROL TOOL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIZ-21B | EDDY CURRRENT EQUIPMENT( ZETECH) | 2 | |
| MK2 | EDDY CURRENT EQUIPMENT MODEL HALEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MKU123 | LUBRICATING EQUIPMENT | 1 | |
| MLGMULTI-1-AC | NARROW-BODY MAIN AND NOSE LANDING GEAR CHANGE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MLGT52-001 | EQUIPMENT-MLG REMOVAL INSTALLATION | 2 | |
| MMIETEV | ENGINE TEST EQUIPMENT SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MODEL 250 | FILLING EQUIPMENT - TANK OIL – 2 GALLON TURBINE OIL DISPENSER | 3 | |
| MODEL 680 | TEST EQUIPMENT (MEGGITT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MODEL 966A1 | MICROMETER - OPTICAL, (UNIVERSAL KIT) CONTAINS EQUIPMENT FOR BOTH MODEL 966 (100 POWER, DEPTHS MEASUREMENT UP TO 0.6650", HEIGHT ABOVE SURFACE 0.100", TRANSPARENT MATERIAL UP TO 0.9975'', AND ACCURACY /-.0005") AND MODEL 966A (200 POWER, DEPTHS MEASUREME | 4 | |
| MODEL HP2 | BABY CRANE (RUGGER EQUIPMENT INC. ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MODEL4830 | ENGINE VIBRATION MONITORING SYSTEM EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MP06204D | OSCILLOSCOPE, AVIONICS EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPN0111 | Cyclean engine wash equipment (18ea) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPS27C/235/295-1 | ANEMOMETRIC INSTALLATION TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MRC0006507 | EQUIPMENT MOISTURE INDICATOR (COM-2010) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MRC005574 | EQUIPMENT - MOISTURE INDICATOR/REGISTER, RADOME | 4 | |
| MRC006507 | EQUIPMENT - MOISTURE INDICATOR/REGISTER, RADOME | 5 | |
| MS21914-5 | EQUIPMENT PLUG | 16 | |
| MS380 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS380MLEU | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT-T-A-0279 | ADAPTER EQUIPMENT SOCKET 23/4'' | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT-T-A-0379 | FUEL TANK DRAIN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT-T-A-0403 | PART WASHING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT-T-G-0038 | GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MULTI-MOVER3XL-30T | EQUIPMENT TUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MVDL-3101-GSA | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MVDL-3101-GSA/MTP | VHF-PASS DATA LINK TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MZTOL000000157 | RAMP TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| N/A | ULTRASONIC CLEANING EQUIPMENT | 5 | |
| N09-028 | EQUIPMENT, SILICONE OIL FILLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| N1304A | ENCODER - SELCAL, GROUND EQUIPMENT | 3 | |
| N1304B-1 | TRANSMITTER TESTER - SELCAL, GROUND EQUIPMENT | 4 | |
| N600D | INDUCED CURRENT EQUIPMENT | 2 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NAS1761J2016 | ADAPTOR FOR ENGINE FUEL FEED MANIFOLD TEST EQUIPMENT P/N: C28014-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NAV-402AP3 | RAMP TEST EQUIPMENT | 2 | |
| NAV402APA100 | RAMP TEST EQUIPMENT | 4 | |
| NDT 19 | ECI EQUIPMENT (NORTEC MODEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT EQUIPTMENT | NDT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1000 | ECI EQUIPMENT (NORTEC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT1200 | ECI EQUIPMENT (NORTEC MODEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT18 | EDDY CURRENT EQUIPMENT NORTEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT19E | ECI EQUIPMENT (NORTEC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT19E2 | ECI EQUIPMENT (NORTEC MODEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT24 | ECI EQUIPMENT (NORTEC MODEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDT3000 | ECI EQUIPMENT (NORTEC MODEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NDTS291 | PHOTOFLUOROMETER EQUIPMENT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NF-1100A | EQUIPMENT - RESPIRATORY PROTECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NI304B-1 | TRANSMITTER TESTER - SELCAL, GROUND EQUIPMENT PART #: IFR 4000 SUPPLIER: 51190 (COM-1613) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC 600 | EDDY CURRENT EQUIPMENT, OLYMPUS | 2 | |
| NORTEC 600D | EDDY CURRENT INSPECTION EQUIPMENT OLYMPUS | 3 | |
| NORTEC 600S | EDDY CURRENT EQUIPMENT, OLYMPUS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 1000 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 1200 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 19 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 19E | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 19E2 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 24 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| NORTEC MODEL NDT 3000 | ECI EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OHME65B01201-1 | OVERHEAD MECHANICAL EQUIPMENT - WING AND BODY MAIN LANDING GEAR | 2 | |
| OHME65B01519-1 | OVERHEAD EQUIPMENT SLING - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| OHME65B67443 | HANDLING EQUIPMENT - UPPER DECK SLIDE LOADING AND REMOVAL | 2 | |
| OHME65B80562 | OVERHEAD MECHANICAL EQUIPMENT - DRIVE MECHANISM ASSY, STABILIZER TRIM | 1 | |
| OHME65B80713-1 | HANDLING EQUIPMENT - HORIZONTAL STABILIZER ACTUATOR (CE) | 6 | |
| OHME65B89003 | OVERHEAD MECHANICAL EQUIPMENT - INBOARD AND OUTBOARD ENGINE STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OHME65B91909 | SLING EQUIPMENT - INLET, SPARE ENGINE JT9D-7R4D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OHMEAOGTOOL747EN0029 | PRELOAD EQUIPMENT, STRUT INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OLYMPUS 500D | NDT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OMNI-P-P416128 | OMNISCAN MX ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OMNI2-P2-PA 16:64 | ULTRASONIC EQUIPMENT OMNISCAN MX2 PAUT16-64/Q1000029 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OMNIPPA1664 | ULTRASONIC EQUIPMENT OMNISCAN MX2 PAUT16-64/Q1000029 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OMNIPPA664 | ULTRASONIC EQUIPMENT OMNISCAN MX2 PAUT16-64 | 1 | |
| OMNISCAN MX2 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| OU131281 | LOCKING EQUIPMENT - CABLE TENSION REGULATOR | 5 | |
| P2D-T6-B | CABLE FOR PHASEC 2D AND 2200 EQUIPMENT - 6FT LENGHT - CONNECTION TRIAX | 1 | |
| P4006409 | ADAPTER,GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PAC30P300P4T | BLEED AIR TESTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PB | FUELING EQUIPMENT | 1 | |
| PF 51-003-1 | FISHPOLE HOIST EQUIPMENT 737 | 11 | |
| PF51-003-1 | HOIST EQUIPMENT - AUXILIARY POWER UNIT | 11 | |
| PF51-009-1 | HOISTING APU BOOTSTRAP EQUIPMENT | 12 | |
| PF53361-48 | MALABAR BP2197-FILLING EQUIPMENT - TANK OIL | 1 | |
| PF54124-2P | CHARGING EQUIPMENT - FLUID, STANDARD | 1 | |
| PF80-012-500 | EQUIPMENT - BACK FLUSH, A/C PACK HEAT EXCHANGE | 13 | |
| PGD51433-7 | QAR TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PGRAT1 | TEST EQUIPMENT FOR RAM-AIR TURBINE | 3 | |
| PGRAT1-1 | Test Equipment for RAT Test | 1 | |
| PGRAT1-1-RS | RAT TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PGRAT1-2 | TEST EQUIPMENT FOR RAM-AIR TURBINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PHANTOM 800 | INTERFACE UNIT, COMMUNICATIONEQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PHASEC2D | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PHASEC3D | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PILOTVARIOHD | INFRARED EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PL3000 | GROUND SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PL600 | EDDY CURRENT EQUIPMENT ELOTEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PLOC 64444 | ENGINE COMPRESSOR WASH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PM83-3124 | EQUIPMENT-SAMPLING FUEL | 1 | |
| PME1211B11001 | PORTABLE MECH EQUIPMENT VENTRAL ATTACH LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PME1211B11002 | PORTABLE MECH EQUIPMENT VENTRAL ATTACH RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PME65B00161-1 | Portable Mechanical Equipment Dolly -Transport And Installation Wing And Body Landing Gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PMS2 | SPECIAL TO TYPE TEST EQUIPMENT (STTE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PR600 | Programming equipment kannad | 4 | |
| PRE141A8430-1 | PROTECTIVE EQUIPMENT, THRESHOLDCOVER PADS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE143A5800 | PROTECTIVE EQUIPMENT, TEMPORARY FLOOR PANEL, SECT. 41-46 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE147A5810 | PROTECTIVE EQUIPMENT, TEMPORARY FLOOR PANEL, STA. 887-986 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A1300-700 | PROTECTIVE EQUIPMENT, LH SIDEWALL FWD CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A1400-700 | PROTECTIVE EQUIPMENT, RH SIDEWALL FWD CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A1600-700 | PROTECTIVE EQUIPMENT, FWD CARGO FLOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A2300-700 | PROTECTIVE EQUIPMENT, LH SIDEWALL AFT CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A2400-700 | PROTECTIVE EQUIPMENT, RH SIDEWALL AFT CARGO COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE453A2600-700 | PROTECTIVE EQUIPMENT, AFT CARGO FLOORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE65B00163-1 | PROTECTIVE EQUIPMENT - SPINDLE ASSEMBLY, DRAG STRUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRE65B00780-1 | THREAD PROTECTOR EQUIPMENT - APU RETENTION BOLTS | 7 | |
| PRE65B01202-1 | PROTECTIVE EQUIPMENT - PIN, TRIPOD APEX, NOSE LANDING GEAR | 8 | |
| PRE65B51114-7 | PROTECTIVE EQUIPMENT - HANDRAIL AND STANCHIONS, CIRCULAR STAIRWAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PRG434 | FUEL TANK VENTILATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PROBE | EDDY CURRENT EQUIPMENT DEFECTOMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PT-ELNDT-S291 | PHOTOFLUOROMETER EQUIPMENT. | 1 | |
| PW100 | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| PWA 25056 | EQUIPMENT - ENGINE SUPPORT | 2 | |
| PWA 25757 | EQUIPMENT - ENGINE SUPPORT | 5 | |
| PWA 25758 | EQUIPMENT - ENGINE SUPPORT | 5 | |
| PWA 29245 | EQUIPMENT - ENGINE SUPPORT | 2 | |
| PWA25056 | EQUIPMENT - ENGINE SUPPORT | 2 | |
| PWA25757 | EQUIPMENT - ENGINE SUPPORT | 5 | |
| PWA25758 | EQUIPMENT - ENGINE SUPPORT | 5 | |
| PWA29245 | EQUIPMENT - ENGINE SUPPORT | 2 | |
| PWC54214 | ADAPTER,GROUND HANDLING EQUIPMENT;| | 6 | |
| PWC60913 | MOTIVE FLOW TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC90355 | TESTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWTE1 | POTABLE WATER TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Q0300017 | OLYMPUS NORTEC 600 - NDT INSPECTION EQUIPMENT | 2 | |
| Q47316 | EQUIPMENT-PROTECTOR, MAIN LANDING GEAR AXLE | 31 | |
| QB18 | DATA ACQUISITION GAGING EQUIPMENT | 5 | |
| R10747 | JACK, TAIL B757, REFURBISHED SECOND USER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R51007-1 | VACUUM GENERATOR EQUIPMENT - CAUL PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R51008-1 | ELECTRICAL EQUIPMENT- HOT BONDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RAT-MOTOR | TOOL/EQUIPMENT BULLETIN NO. 320-D0313 FOR A318/A31 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RATMK | TEST EQUIPMENT FOR RAM-AIR TURBINES | 2 | |
| RATMK350 | TEST EQUIPMENT FOR RAM-AIR TURBINES (A350) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB211 | ENGINE HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBI4100T | Ground Support Equipment Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RDT1F | RADAR TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RE4716 | TEST EQUIPMENT MOD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RF80K | BATTERIE CHARGE TESTING EQUIPMENT | 7 | |
| RITE-59-Y | TOOL KIT,MAINTENANCE,AIRCRAFT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RL5525 | EQUIPMENT - EMERGENCY JACKING, NOSE LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1116 | ENGINE INTAKE COWLING DELIVERY EQUIPMENT | 13 | |
| RSE1170 | HOISTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RT-968-1 | RIPS BATTERY MAINTENANCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S-2517-1 | SNAP FASTENER EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S06 | ELT REPROGRAMMING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S0NIC136 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S2-830 | EQUIPMENT EDDY CURRENT DEFECTOSCOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S3151-101 | EMERGENCY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S3S14990000 | LIFTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S3S21013000 | EXTRACTOR AND LIFTING EQUIPMENT, IPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| S4-8136 | FUEL SAMPLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SA30199 | PROOF TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SAE AMS2430 | SHOT PEEN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SCA-1000WC | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| SCA-150-1QT | IDG SERVICING EQUIPMENT | 1 | |
| SCA-C36001-64 | TEST EQUIPMENT B737 BLEED AIR SYSTEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SCA-J32060-1 | EQUIPMENT DRAIN MLG AND NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SCAHP10M-6116 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCAHP10M-6116CGA580 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCALP10M | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | 1 | |
| SCALP10M-6116 | FILLING EQUIPMENT - NITROGEN, PRESSURE REGULATED GAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SD-119-B | Trim Balance Analyzer (Measuring Equipment) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SDMS-VM-004 | LASER MEASUREMENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SETNL130WZ | SETNL130 WITH 14.4V+EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SIGMATEST D2-069 | CONDUCTIVITY TEST EQUIPMENT | 1 | |
| SIGMATEST2.069 | CONDUCTIVITY MEASUREMENT EQUIPMENT (14MM PROBE) | 1 | |
| SLC-300-2 | EQUIPMENT - WASTE SYSTEM SERVICING | 1 | |
| SMART UEI | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SMARTUE1 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SMARTUE1NEO | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SMASR | X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SME65B95026 | SHIPPING MECHANICAL EQUIPMENT - SHIP/STORE AUXILIARY FUEL CELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SMLB-EQP-2GQG | SMALL LAB EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SNV402 | FLAT ROPE FOR THE BRAKE HOIST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SONATEST 330 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SONATEST 340 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SONATEST 380 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SONIC 1200M | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SONIC137 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPF-4 | GAGING EQUIPMENT (BEECHCRAFT CORP) | 2 | |
| SPF-4 (A1M-BCH-GE) | GAGING EQUIPMENT (BEECHCRAFT CORP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPI-1839 | DOWNLOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10039 | CABLE ASSY - FIRE EXTINGUISHING SYSTEM TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10126 | ADAPTER EQUIPMENT, CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10171 | ELEVATOR AFT QUADRANT RIGGING BLOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10177 | RIGGING EQUIPMENT - CONTROL INSTALLATION, EL AND STAB TRIM SYSTEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10253 | MLG DOOR ACTUATOR LOCK EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-10426 | THREAD PROTECTOR EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-12536 | TEST EQUIPMENT OUTBOARD T.E FLAP TRANSMISSION NO BACK BRAKE OP TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-13921 | BACKFLUSH EQUIPMENT - BLEEDAIR HOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14094 | TEST EQUIPMENT - NEADS NEGATIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14176 | TEST EQUIPMENT - RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14177 | MEASUREMENT EQUIPMENT - RUDDER PCA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14178 | DIGITAL READOUT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14179 | DIGITAL READOUT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14181 | MEASUREMENT EQUIPMENT - INBOARD ELEVATOR PCA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14481 | R/I EQUIPMENT - TRUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14549 | SLING EQUIPMENT, THRUST REVERSER CFM LEAP-1B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14650 | PROTECTIVE COVER EQUIPMENT - ENGINE INLET, CFM LEA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14655 | TORQUE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14655 / 23226 | TORQUE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-14806 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN (TOP ASSY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1530 | FUEL DRAIN EQUIPMENT | 1 | |
| SPL-15534 | LADDER EQUIPMENT - EMPENNAGE ACCESS, VERTICAL FIN (BASE ASSY AND LADDER ASSY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1633 | EQUIPMENT - BATTERY INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1635 | HOIST EQUIPMENT, POWER DISTRIBUTION PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1647 | TEST EQUIPMENT FOR ENG FIRE EXTIN. SYS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1663 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1678 | LOCK EQUIPMENT- HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1693 | LOCK EQUIPMENT, HORIZONTAL STABILIZER ACTUATOR BALL NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1728 | HANDLING EQUIPMENT, STABILIZER JACKSCREW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1729 | SLING-EQUIPMENT FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1751 | EQUIPMENT ADAPTER CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1752 | EQUIPMENT - CHECK, JACKSCREW BACKLASH, HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1772 | FITTING EQUIPMENT - FUEL DRAIN SUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1778 | EQUIPMENT - VENTILATION, FUEL TANK | 1 | |
| SPL-1829 | DRAIN EQUIPMENT | 1 | |
| SPL-1862 | AFT TRUNNION PIN, MLG, REMOVAL AND INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-193 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1934 | EQUIPMENT - TEST, PRESSURE LEAK, CREW OXYGEN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1948 | EQUIPMENT - PRESSURIZATION, WASTE DRAIN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-19703 | TEST EQUIPMENT - OXYGEN SENSOR NGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1990 | EQUIPMENT - FITTING, FORWARD AND AFT LARGE CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-2011 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-2027 | LADDER EQUIPMENT - VERTICAL FIN AND EMPENNAGE ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-2030 | PIN REMOVAL EQUIPMENT - HORIZONTAL STABILIZER | 1 | |
| SPL-2032 | SLING EQUIPMENT - VERTICAL FIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-2418 | LOCKPIN - EQUIPMENT, THRUST REVERSER ACTUATION MODULE LOCKOUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-3997 | DRIVE ADAPTER EQUIPMENT, HORIZONTAL STABILIZER TRIM ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-4138 | TEST EQUIPMENT, HORIZONTAL STABILIZER FREEPLAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-4267 | INSPECTION EQUIPMENT - ELEVATOR FREEPLAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-4582 | RETRACTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-4720 | Test Equipment - Leakage Test | 1 | |
| SPL-5385 | SEAL INSTALLATION EQUIPMENT, TE FLAP DRI | 1 | |
| SPL-5447 | Bearing Width Measurement Equipment | 1 | |
| SPL-6819 | EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7229 | EQUIPMENT - SLING, INBOARD TE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7319 | EQUIPMENT - TEST, DECOMPRESSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7454 | TEST EQUIPMENT DETECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7455 | TEST EQUIPMENT - LEAK AND PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7622 | INSTALLATION REMOVAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7815 | EQUIPMENT - REMOVAL/INSTALLATION, AFT STRUT FAIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-7987 | CLAMP EQUIPMENT – SPRING INSTALLATION /REMOVAL SPL-7987 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-8593 | TEST EQUIPMENT - ROTARY ACTUATOR TRAILING EDGE FLA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9698 | FUEL DRAIN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9731 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9951 | RUDDER FREEPLAY CHECK FORCE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9973 | SLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-9977 | MECH. EQUIPMENT - SPANNER WRENCH, FWD TRUNNION BRG (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL10039 | FIRE EXT TEST EQUIPMENT CABLE ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL1633 | EQUIPMENT - BATTERY INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL1663 | TEST EQUIPMENT - FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPW | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| SPW-250 | EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPW-350 | EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| SPW-500PL | POTABLE WATER SERVICING EQUIPMENT | 1 | |
| ST 1778 | VENTILATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST-101B | AMPROBE ST-101B RECEPTACLE TESTER (TEQUIPMENT) | 1 | |
| ST150-100 | G200 SHORING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2 | SAFETY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST200-119 | G200 SHORING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2220-3-8 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2220-3-9 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST30-8783A55 | TEST EQUIPMENT | 1 | |
| ST70297 | Installation Kit, Shop Equipment | 1 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST918A-375-875 | REMOVAL EQUIPMENT | 2 | |
| ST918A375-875 | Removal Equipment | 2 | |
| ST918A375-906 | Removal Equipment | 1 | |
| ST927-1 | Removal Equipment | 7 | |
| ST927C82 | Removal Equipment | 1 | |
| ST991A3-1 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A3-2 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A3-3 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A3-4 | Removal Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST991A4 | REMOVAL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-0341 | COMPRESS AIR SUPPORT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-1142 | EQUIPMENT -WASTE SYSTEM SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-12395 | SPECIFICATION - LOAD CELL EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-1286 | EQUIPMENT - PRESSURE WASHER, ELECTRICDIESEL DR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-7028 | EQUIPMENT - BORESCOPE INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| STD-774 | RESPIRATOR - FULL-FACE, AIR PURIFYING (WITH FILTERS/CARTRIDGES) (RESPIRATORY PROTECTION EQUIPMENT IÇERISINDE OLABILIR, ÜRETICIYE SORULACAK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SUPERHALEC | EDDY CURRENT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SUPERSEDER III | NI-CAD BATTERY CHARGER AND ANALYZER - TEST EQUIPMENT | 3 | |
| SUT260001 | SET OF EQUIPMENT FOR TESTING TIGHTNESS OF THE FIRE EXTINGUISHING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SV-ZYJ-02 | BEARING GREASING EQUIPMENT – SINGLE WORK STATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SYSTEM | EQUIPMENT - RESPIRATORY PROTECTION | 1 | |
| SYSTEM #2 | VENTILATION EQUIPMENT, FUEL TANK | 3 | |
| SYSTEM #5 | EQUIPMENT - RESPIRATORY PROTECTION | 1 | |
| SYSTEM- | VENTILATION EQUIPMENT | 1 | |
| SYSTEM2 | VENTILATION EQUIPMENT | 3 | |
| T-Rx RP+ | T-Rx RP+ Radio Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-Rx Radio | T-Rx Radio Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T009772 | APU SLING EQUIPMENT | 1 | |
| T010010 | Fire extinguishing test equipment | 1 | |
| T0V915423 | EXTENSION TUBE TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T0V915425 | DUCK-BILL TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T14218 | TURNER INFLATION EQUIPMENT | 1 | |
| T14489 | TURNER INFLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T250 | FLIR T250 THERMAL IMAGING INFRARED EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T322100 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T322501 | AUTOMATIC TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T335746 | MANUAL TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T42315-72AT3 | HOIST CABLE REMOVAL/FITTING EQUIPMENT | 1 | |
| T72340040 | EQUIPMENT OF LIFTING MOD 4 | 1 | |
| T792992055000000H | SLING EQUIPMENT-MLG AND NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T9-0187K | FIXTURE, TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TA1J0150C1 | SUPPORT EQUIPMENT, RELEASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TBA | HEAT EXCHANGER WASH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TBL-180 | TRACTOR TOWBARLESS (DOUGLAS EQUIPMENT LTD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TBL-200 | TRACTOR TOWBARLESS (DOUGLAS EQUIPMENT LTD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TBL-280 | TRACTOR TOWBARLESS (DOUGLAS EQUIPMENT LTD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TC3230G001 | EQUIPMENT STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE001U2158-4 | TEST EQUIPMENT E/E COOLING TEST KIT | 2 | |
| TE1P436A0001 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE27T-41001-8 | TEST EQUIPMENT SCALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE38T-31001-3 | TEST EQUIPMENT, DRAINCART | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE60B40108 | JETISSON EQUIPMENT OVERRIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE60B50324 | TEST EQUIPMENT - SIMULATOR POWER DEPLOYMENT RESERVOIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE60B92406 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-51575-1 | TEST EQUIPMENT PLUG - RAM AIR DUCT INSTALLATION STA 525 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-53876 | Test Equipment - Retractable Landing Light Adjusment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73720-1 | TEST EQUIPMENT - RIGGING TOOL, OUTBOARD FLAP | 1 | |
| TE65-73720-1 -2 | Test Equipment -Rigging Tool. Outboard Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73720-2 | TEST EQUIPMENT - RIGGING TOOL, OUTBOARD FLAP | 1 | |
| TE65-737201-2 | TEST EQUIPMENT -RIGGING TOOL. OUTBOARD FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65-73762 | Test Equipment -Nose Gear Installation Rigging Protractor | 1 | |
| TE65B00184 | TEST EQUIPMENT - INBOARD ELEVATOR ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B01102 | TEST EQUIPMENT - PRESSURE MANIFOLD, CENTER WING TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B01202 | TEST EQUIPMENT - NOSE GEAR COMPONENT ASSEMBLY | 7 | |
| TE65B17158 | TEST EQUIPMENT PLUG - VENT SCOOP WINGTIP (WS 1558) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40147 | Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40403 | TEST EQUIPMENT - ELECTRICAL/ELECTRONIC EQUIPMENT COOLING SYSTEM EXHAUST DUCT SEAL PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40615 | TEST EQUIPMENT - SLUG PROXIMITY SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40861 | TEST EQUIPMENT MLG WARNING SWITCHES | 6 | |
| TE65B40862 | TEST EQUIPMENT - LANDING GEAR DOOR PROXIMITY SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40880 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B40961 | TEST EQUIPMENT - DUCT INSTALLATION, LAVATORY-GALLEY VENTILATION SYSTEM DUCT INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B41727 | TEST EQUIPMENT - CO2 EXHAUST SYSTEM LOWER LOBE GALLEY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B50041 | TEST EQUIPMENT DRAIN MAST INSTALLATION WASTE WATER | 8 | |
| TE65B52434 | TEST EQUIPMENT - CONTROL CABLE INSTALLATION, INFLATION SYSTEM, CREW ESCAPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B52444 | TEST EQUIPMENT - GAS GENERATOR INSTALLATION, ESCAPE SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B81118 | TEST EQUIPMENT, POWER PACK ASSEMBLY - INBOARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B81119 | TEST EQUIPMENT - LEVER ARM STOP POWER PACK ASSY OUTBD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B90229 | Leak Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B92201 | TEST EQUIPMENT - EQUIPMENT AND PLUMBING INSTALLATION VENT SYSTEM | 3 | |
| TE65B92751 | TEST EQUIPMENT - WATER INJECTION SYSTEM INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B98608 | TEST EQUIPMENT DRAIN APU | 5 | |
| TE9-031 | TRIM EQUIPMENT JT9-59A/A70 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE9-05 | TRIM EQUIPMENT JT9D-7R4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEE-10 | ENGINE TRIM EQUIPMENT(079-29240) | 3 | |
| TEE32-1V3 | DUAL ENGINE TRIM EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEE32-2V3 | ENGINE TRIM EQUIPMENT CF6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEE32-3V3 | ENGINE TRIM EQUIPMENT CF6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEEQ01-622-5058-001 | RADIO ARC - 182 TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEEQ01-622-9418-001 | RADIO HF - 9000 TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TEMPLATE | Hoist Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TER-100-1 | T-Rx Radio Test Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TER-100-3 | T-Rx RP+ Radio Test Equipment | 2 | |
| TEST-FUCHS RATMK | TEST EQUIPMENT FOR RAM-AIR TURBINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TESTO 445 | TEMPERATURE MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TF20 | CAPACITANCE MEASURING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TH100-C | TAP TESTER - NDT EQUIPMENT | 2 | |
| TK 1738-6 | 02 SYSTEM TEST EQUIPMENT PRESSURE GAGE (0 TO 100 PSI) (MM 35-00-00 / 20-52-00) | 1 | |
| TK1738-6/939-2 | OXYGEN SYSTEM TEST EQUIPMENT | 2 | |
| TK1797-4 | INTER-COMMUNICATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL-99926 | FUEL NOZZLE SPRAY TEST EQUIPMENT | 1 | |
| TL1P375A0002-00 | TORQUE LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL1P375A000200 | TORQUE LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL2P375A0002-00 | TORQUE LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL2P375A000200 | TORQUE LOADING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL99926 | FUEL NOZZLE SPRAY TEST EQUIPMENT | 1 | |
| TM0588G201 | EQUIPMENT ITEMS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM4865G001 | ENGINE VIBRATION TEST EQUIPMENT | 2 | |
| TM6940G001 | MASS MODULE 01 ACCESSORY GEARBOX EQUIPMENT - MECHANICAL MAGNETIC PLUG - MAGNETISM | 3 | |
| TM80201001 | TOOL - VALVE OPENING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMH AS02-02-00 | SAFETY STAY EXT EQUIPMENT | 3 | |
| TMH RDC04-09-00 | WHEEL AND BRAKE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMH-AMS | RAT TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMHAS02-02-00 | SAFETY STAY EXT EQUIPMENT | 3 | |
| TN010987 | TRANSPORT MECH EQUIPMENT FUSELAGE DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TN455031 | TRANSPORT MECH EQUIPMENT FUSELAGE DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TN459827 | OVERHEAD MECHANICAL EQUIPMENT HORIZONTAL STAB. SLI | 1 | |
| TOOL | ENGINE HANDLING EQUIPMENT - RB211-535 | 2 | |
| TOV 915421 | DUCK BILL PITCH. TEST EQUIPMENT, ELEVATOR TRIM TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOV 915422 | LOCKING WEDGE.TEST EQUIPMENT, ELEVATOR TRIM TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOV915423 | EXTENSION TUBE. TEST EQUIPMENT, AILERON TRIM TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOV915425 | DUCK BILL. TEST EQUIPMENT, AILERON TRIM TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TOV915426 | TURNBUCKLE. TEST EQUIPMENT, AILERON TRIM TAB | 2 | |
| TP-2100 | AUTOMATIC KARL FISCHER OIL WATER CONTENT TESTING EQUIPMENT (TP-2100) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TPED-RGA-KIT | T-PED TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TR-220 | Avionics Test Equipment - TCAS/XPDR/DME/ADS-B and TIS | 15 | |
| TRAVELPANEL 50MP | EQUIPMENT - RESPIRATORY PROTECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TRENT 800 BOOTSTRAP KIT FOR ENGINE REMOVAL / INSTALLATION | BOOTSTRAP EQUIPMENT - TRENT 800 ENGINE | 1 | |
| TS1275KP | 3M MIX & DISPENSE EQUIPMENT TS-1275-KP SPATULA KIT 1 PER CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TS500 | TEST EQUIPMENT FOR FDR LOCATION BEACON IN WATER | 16 | |
| TSF21T-58001-15 | TEST SUPPORT FIXTURE EQUIPMENT COOLING DUMMY KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TSJ65B01539-1 | TEST EQUIPMENT - ACTUATOR ASSEMBLY, TRUCK POSITIONER, WING GEAR | 3 | |
| TTF 1.0 | LIFT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TWS-402 | POTABLE WATER SERVICING EQUIPMENT | 1 | |
| TYPE140 | X-RAY EQUIPMENT FEDREX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TYPE1541 | X-RAY EQUIPMENT DC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TYPE1B | EDDY CURRENT EQUIPMENT HALEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TYPEF | EDDY CURRENT EQUIPMENT DEFECTOMAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TYPEUH | EDDY CURRENT EQUIPMENT LOCATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Trent 800 Bootstrap kit for engine removal / installation | BOOTSTRAP EQUIPMENT - TRENT 800 ENGINE | 1 | |
| U21891000 | NOSE OLEO CHARGING EQUIPMENT | 16 | |
| U8100029 | ULTRASONIC EQUIPMENT OMNISCAN MX PAUT16-128 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| UC32034-227 | INSTALLATION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| UCR-2-3-1 | UCR-2-3-1 EQUIPMENT - STATION, GROUND | 1 | |
| USC-IFD-512 | INTERMITTENT FAULT DETECTION PORTABLE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USD10 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USK7D | ULTRASONIC EQUIPMENT | 1 | |
| USK7S | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USM GO | UT EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USM25 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USM35 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USM36 | ULTRASONIC EQUIPMENT | 1 | |
| USN52 | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USN52L | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USN52R | EQUIPMENT, ULTRASONIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| USN58L | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| UT1594 | CARRY CASE-DATA ENTRY PLUG ANALYSER EQUIPMENT STORAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V-804 | EQUIPMENT - SAMPLING, FUEL | 2 | |
| V150-1 | FILLING EQUIPMENT - TANK OIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V15785 | ELECTROCHEMICAL ETCH EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V799 | EQUIPMENT - SAMPLING, FUEL | 4 | |
| V804 | EQUIPMENT - SAMPLING, FUEL | 2 | |
| VACLAV 1 | CLEANING EQUIPMENT VACLAV - TANK, INTERN | 2 | |
| VACLAV1 | CLEANING EQUIPMENT VACLAV - TANK, INTERN | 2 | |
| VACUUM EQPT | VACUUM EQUIPMENT 0 TO 1 BAR (15 PSI) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VALCAV 1 | HIGH PRESS EQUIPMENT LAV VAC SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VIBREX 2000 PLUS | TRACK AND BALANCE EQUIPMENT | 3 | |
| VIBREX2000 | TRACK & BALANCE EQUIPMENT, HONEYWELL CHADWICK | 4 | |
| VKT-TJ-QLJ-A320Z | A320 Landing Gear (MLG)Change Equipment/A319/320 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VQCT119168-3 | TESTING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VTE15 | TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VU10-0060 | SPRAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| W4521W | INSULATION TEST EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WA115-10 | EQUIPMENT STORAGE SH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WB012620-01 | GROUND EQUIPMENT TEST, ARTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WB250AIR | EQUIPMENT, BALANCING NOSEWHEEL AND TIRE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WC100E | EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WF150-1 | FILLING EQUIPMENT -TANK OIL | 8 | |
| WG01 | Aircraft / Avionic Equipment Vacuum Cleaner | 3 | |
| WSP-900 | COM-1141 - EQUIPMENT - POTABLE WATER SERVICING | 1 | |
| WT-114096 | PORTABLE FLOW GAIN TEST GAIN EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WTD5X | ULTRASONIC EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WTM-900 | EQUIPMENT - POTABLE WATER SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WWSERF3 | WEIGHTING EQUIPMENT KIT - WITH SCALES, HCM AND ACCESS RAMP | 1 | |
| XLG3SYS | BOROSCOPE EQUIPMENT | 1 | |
| XLGO | BORESCOPE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| XLVUD6120 | BORESCOPE EQUIPMENT | 2 | |
| XPO EVO 225D | YXLON X-RAY EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Z-45-25J | STAND AND PERSONNEL LIFTING EQUIPMENT - GENERAL PURPOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ZA-1633 | PENETRANT PROCESSING INSPECTION EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ZODIAC AERO | GALLEY EQUIPMENT TEST BENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| a71001-191 | Bootstrap Equipment - JT9D-7R4D / PW4000 | 15 | |
| c21003-82 | BACKFLUSH EQUIPMENT - AIR CONDITIONING PACK HEAT EXCHANGER | 4 | |
| f 72903-24 | Oil Breather Press Test Equipment | 4 | |
| f72903-24 | Oil Breather Press Test Equipment | 4 | |
| 50HME65B94600 | BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C12006-14 | LOCK EQUIPMENT - AILERON FULL-UP LUBRICATION | 6 | |
| C26004-79 | TEST EQUIPMENT | 1 | |
| C26004-84 | TEST EQUIPMENT – ENGINE FIRE EXTINGUSHING SYSTEM | 9 | |
| C78033-1 | EQUIPMENT – HOLD OPEN, THRUST REVERSER COWL, LEAP-1B ENGINE | 7 | |
| F72977-62 | GAUGE EQUIPMENT - HYDRAULIC BRAKE SYSTEM PRESSURE CHECKING | 15 | |
| А27021-29 | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| В27064-1 | TORQUE EQUIPMENT - RUDDER PEDAL ADJUSTMENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| В78009-26 | LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| С27030-94 | TEST EQUIPMENT - FLAP SCREW BACKLASH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 97A27302010000 | MEASURING EQUIPMENT,USED TO MEASURE THE | 2 | |
| 97A28002191000 | PRESSURIZATION EQUIPMENT,APU FUEL FEED S | 4 | |
| 97A29102094000 | TANK FILLING EQUIPMENT,HYDRAULIC,USED TO | 1 | |
| 97A49602000000 | MEASURING EQUIPMENT,FOR RAM AIR TURBINE( | 2 | |
| 98A26201000000 | EQUIPMENT,FOR REMOVE/INSTALL FIRE EXTING | 8 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98A27501500001 | EQUIPMENT,TOOL,USED TO REMOVE/INSTALL FL | 1 | |
| 98A27503001000 | MANUAL DRIVE EQUIPMENT,WING FLAP CONTROL | 5 | |
| 98A27503003000 | GUARD,SAFETY EQUIPMENT,FLAP/SLAT CONTROL | 8 | |
| 98A27603011000 | LOAD MEASURE EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27801000000 | EQUIPMENT FOR REMOVAL/INSTALLATION SLAT | 2 | |
| 98A27803500000 | LOCKING EQUIPMENT FOR KRUEGER FLAP SUPP | 4 | |
| 98A32104158000 | HOISTING EQUIPMENT,MAIN GEAR SIDESTAY AS | 6 | |
| 98A32203000000 | EQUIPMENT,INSTALL/REMOVE,NOSE LANDING GE | 5 | |
| C26004-84 | TEST EQUIPMENT FOR ENGINE FIRE EXTINGUIS | 9 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
