Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
DT200 | ARINC 429 BUS DATA READER | 4 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
(CALIB) DT200 | 429/CSDB Analyzer | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
01-1400-00/DT200 | ARINC 429/CSDB DATABUS ANALYZER DATATRAC 200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
163-DT200 | 163-DT200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2DT200 | TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2001-909 | CUSTOM STEP WEDGE INC909, 1"X6" W/ 1" STEPS .025 -.150 IN .25 INCREMENTS. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2002AL | CALIBRATION STANDARD THREE HOLES, 1.0,1.25,1.5, CORNER NOTCH .030X.030. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2003-1AL | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 7075-T6 ALUMINUM. Includes Test Report and Certificate of C | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2003-1S | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 STEEL. Includes Test Report and Certificate of Confor | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2003-1S-1 | 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 Thru EDM notches .005"(+/- .001") and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 Steel. Includes Test Report and Certificate... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2003-2S | 12 HOLE REFERENCE STANDARD 1018 STEEL HOLE SIZES: .187", .250" ,.312", .375", .437", .500", .562", .625", .687", .750", AND 1.0" ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 304 STAINLESS STEEL. Includes Test Repo | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2005A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate o | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2005CS | 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .030X.030 Corner EDM Notches .005"(+/- .001") wide, .020" full bore thru EDM notches .005"(+/- .001") deep and 3 SURFACE NOTCHES .010", .020", .040" D... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2005TI | 12 HOLE REFERENCE STANDARD 6AL-4v TITANIUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate of | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006/13-8 | 12 HOLE REFERENCE STANDARD 13-8 PH STAINLESS STEEL (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006/17-4 | 12 HOLE REFERENCE STANDARD 17-4PH (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .030X.030. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006/300M | 12 HOLE REFERENCE STANDARD 300M STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" ... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006A | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.004" ±.002" WIDE CORNER EDM NOTCH in EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020",... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006S | 12 HOLE REFERENCE STANDARD 4130 or 4340 STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEE... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006SS | 12 HOLE REFERENCE STANDARD 304 304 STAINLESS STEEL.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2006SS-1 | REFERENCE STANDARD | 1 | |
AFNDT-2006TI | 12 HOLE REFERENCE STANDARD 6AL-4V.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.005"WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020", .040" DEEP .005" WIDE... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2007AL | CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2007AL-1 | CUSTOM 4 STEP WEDGE. MATERIAL: 2024-T3 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2008/2024-T6 | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2024-T6 .. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2008/C | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 3 | 1 | |
AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2008/MAG | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3. MATERIAL: MAGNESIUM. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2008/SS | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 & 32-42-05 FIGURE 11 PROCEDURE 1 PAGE 15. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ANDT2007 | Boeing Standard, PT6 53-10-27 PG456 Fig 48 Sheet8 Detail IV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DT200 429/CSDB | DT200 ARINC 429/CSDB DATA BUS READER P/N: DT200-220 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DT200-110 | ARINC 429 BUS DATA READER | 1 | |
DT200-220 | DT200 ARINC 429/CSDB DATA BUS READE | 2 | |
DT200/DT250/DT400 | Databus | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DT200H | DATABUS ANALYZER | 1 | |
NDT200 | Boeing Standard. 727; PT6; 28-10-27; PG7; FIG1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT2000S | EDDY CURRENT FLAW DETECTOR WITH FLYING DOT CRT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT2001 | BOEING 737 PT 4 28-10-01 PG7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT2009 | BOEING REFERENCE STANDARD 727 Part 4 57-10-27 Page 10 Figure 1. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ZNDT-2003-1S | STEEL MUTLI HOLE REFERENCE STANDARD>>> THE NOTCH SPECIFICATION IS 0.030'' X 0.030'' (45° ) CORNER NOTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.