Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
856A3926G01 | DRAWING | 1 | |
PWC80505 | DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE05000901 | DRAWING | 1 | |
SE05252902 | DRAWING | 1 | |
SE251021131 | DRAWING | 1 | |
SE35102182 | DRAWING | 1 | |
SE35102192 | DRAWING | 1 | |
SE35812101 | DRAWING | 1 | |
SE45807901 | DRAWING | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
0180-3010000 | HELI-COIL WITHDRAWING TOOL | 2 | |
10/3641 | FISHPOLE HOIST KIT DRAWING NO 10/3641 CONFIG.3 | 2 | |
105-14101 W1 | H145 DRAWING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C2428P01 | DRAWING TOOLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000DD10980-1 | Aluminum CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000DD10980-3 | Steel CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000DD10980-5 | Titanium CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
208 FRONT SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 FRONT SPAR LOWER CAP. Drawing NO. 2683201 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
208 REAR SPAR | CESSNA / TEXTRON AVIATION EDDY CURRENT REFERENCE STANDARD 208 REAR SPAR LOWER CAP. Drawing NO. 2683202 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
262A | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2801787 | DEFACTOMETER 1.837 AIRBUS HFEC INSPECTION KIT DRAWING NO . 1.837.69-0038 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2PRE65B94003 | PLUG - TURBINE REVERSER EXIT NOZZLE, CF6-50 ENGINE (SPECIFICATION DRAWING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3727073-1 | CARBON SEAL DRAWING TOOL | 1 | |
407-XMSN | 407 TRANSMISSION SHIMS PER BELL'S ORIGINAL SHIM DRAWING, $1000 PER SET OF FOUR (4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601967-9 | NO DRAWING *A.S.I.* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65C28106 | REPAIR DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
708-666 | MAIN DRAWING CRIMPING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLAT | 1 | |
83707 | FLUSH CART - ENGINE IDG COOLING SYSTEM, PER BOEING SPEC. DRAWING A71040 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
85517021-001-138 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
856A2626P23 | HANDLE BENT TO DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2953 | Partial drawing | 2 | |
856A3598P11 | STEEL TUBE TO DRAWING 1 DIA X 1/8" WALL" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3724G02 | Sighting Tool Set- ( only have G01 drawings) | 7 | |
856A3926G01 | DRAWING & CHECKING SUPPORT - OIL SCA | 1 | |
85740007-S901-138 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
85740007-S903-138 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
85740007-S904-138 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
85740009-S903-138 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
85741000-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
85741000-003-138 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
85741000-004-138 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
8DK4354 - 001 | DRAWING KIT RUDDER ACTUATOR BRACS NUTS INSPECTION AND RECTIFICATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9829-0012 | FLUSH CART - ENGINE IDG COOLING SYSTEM, PER BOEING SPEC. DRAWING A71040 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A57103017000 | Airbus Standard, A300-600 FIG4 see drawing provided | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D28108658000 | TEST TOOL - PRESSURE, ACT( replaces 98D28108417000)- No Drawing !!!!!!!!!!!!! | 9 | |
98F29208217018 | SPRING AS PER DRAWING | 1 | |
98S21305000000 | DRAWING PARTS 98S21305000000 ATR | 1 | |
98S53005021-000 | ATR72 Calibration Standard Drawing PT6 53-51-01 PG 608, Figure 601 | 3 | |
98S57105015 | Calibration Standard Drawing 57-14-03, Figure 401 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S57105032-200 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 404, Figure 401 | 3 | |
98S57105032-202 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 405, Figure 402 | 3 | |
98S57105033-200 | ATR42 CALIBRATION STANDARD DRAWING PT4 57-12-11 PG 404, FIGURE 401 | 1 | |
98S57205030-004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
98S57205030.001 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 4 | |
98S57205030.004 | COMPOSITE LIGHTNING REFERENCE STANDARD..FOR ATR72 PT 4 51-40-00: REFERENCE DRAWING | 5 | |
98S57205030001 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 4 | |
98S57205030003 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S5721 | 2 | |
98S57205030004 | CALIBRATION STANDARD, ATR72, DRAWING REF: 22S57213396 | 5 | |
A25012-19 | ELECTRICAL TEST EQUIPMENT - OFF-WING ESCAPE SLIDE SYSTEM (LIMITED APPLICABILITY ON A25012-19 PER A25012 GSE DRAWING) | 2 | |
A25012-29 | ELECTRICAL TEST EQUIPMENT - OFF-WING ESCAPE SLIDE SYSTEM (LIMITED APPLICABILITY ON A25012-19 PER A25012 GSE DRAWING) | 2 | |
A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-24 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AMS2630C Custom | Custom Reference Standard Per SAE AMS2630C. material: Titanium Alloy, Ti6Al4V per AMS-4928R Annealed. Includes 2 EDM Flaws per customer supplied Drawing. Includes Test Report Traceable to NIST and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27067-1 | Check Drawing | 7 | |
B28005-2 | CHECK DRAWINGS | 2 | |
B71001-271 | CHECK DRAWING | 2 | |
B71001-313 | CHECK DRAWING | 4 | |
B71040-10 | ROPE ASSY AS PER DRAWING | 1 | |
C-130 FIXTURE | Custom C-130 Blade Inside Bushing Probe Fixture per Drawing No. 201757983. Material: ABS Plastic machined not 3D Printed. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27001-24 | CHECK DRAWING | 4 | |
C27001-25 | Check Drawing | 2 | |
C32037-1 | Check Drawing | 10 | |
C652-103SP | RIVET SET, CUSTOM DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C652-117GT | RIVET SET, CUSTOM DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DHC-29444 | Q400 Reference Standard, De Havilland Drawing No DHC29444-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DHC-29444-001 | Q400 Reference Standard, De Havilland Drawing No DHC29444-001 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70063 | KIT -0 PLUG SHIELD AND COVER KIT DRAWING LISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72978 | COPY OF DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70-025-600/737 | TOWBAR HEAD PROFILE 80MM AS DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70-025-700U-L | 90MM MILD STEEL PROFILE TO DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70030-2-24 | 5MM MILD STEEL LASER CUT TO DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70077-39 | -7 CRADLE SIDE ARM PLATEAS PER DRAWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27030-1 | TORQUE ADAPTORAFTER STOCK SOLD NO DRAWING | 8 | |
G601R274001-101 | DRAWING - HORIZONTAL-STABILIZER LIFTING FIXTURE | 2 | |
G601R551000-1 | DRAWING - HORIZONTAL-STABILIZER LIFTING FIXTURE | 1 | |
G601R551000???1 | DRAWING HORIZONTAL STABILIZER LIFTING FIXTURE | 1 | |
G601R551000−1 | DRAWING − HORIZONTAL−STABILIZER LIFTING FIXTURE | 1 | |
G601R551000−1 | DRAWING − HORIZONTAL−STABILIZER LIFTING FIXTURE | 1 | |
GSB2712002 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
GSB2712003 | TOOL-AILERON TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2712004 | RIGGING DRAWING AND MYLAR TEMP | 3 | |
GSB2712005 | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2712005| | TOOL-TRIM TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2712006 | TOOL-L/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2712007 | TOOL-R/H GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
GSB2715001-IAS | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
GSB2715002 | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
GSB2715002-IAS | TOOL-RIGHT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
GSB2715003 | TOOL-LEFT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 2 | |
GSB2715004 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
GSB2715005 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 5 | |
GSB2715005-IAS | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | |
HUOK 2012 -1/4 ASP | FASTENER DRAWING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J26004-49 | Cable - Fire Extinguishing System (Cargo/LLAR): Refer To The Tool Drawing, Usage Table, To Determine The Required Cables. | 6 | |
K1025S | ENVELOPE DRAWING POSITIONER | 3 | |
M47382-200 | New drawing- Guide cone- Brakes | 1 | |
MITSM112T5435-2 | TOOL DRAWING(COPY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MITSM112T5435-3 | TOOL DRAWING(COPY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MITSM112T5435-4 | TOOL DRAWING(COPY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MITSM112T5435-5 | TOOL DRAWING(COPY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1087-R&D V4 | 3 plates per customer drawing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1088-036X2/050-B | Boeing Reference Standard, Bare, Drawing Provided | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1088-036X2/050-C | Boeing Reference Standard, Drawing Provided | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1088-250/250 | Boeing Standard, Drawing Provided, Figure 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1099G-P1 | BEOING REFERENCE STANDARD 757 Part 4 53-30-04 Page 15-17 Figure 3. Material: Delrin. *** SEE FINALIZED DRAWING*** | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT251 | Boeing Standard, 727 PT6 57-30-27:PG30 FIG3 SHEET6, engrave per drawing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT262 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig 11 Sheet 8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT263 | Boeing Standard, 727 PART6 53-10-27, Drawing No. Fig6, Page 29 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT3038P1 | REFERENCE STANDARD, 737 PART4 57-50-02 **SEE NEW DRAWING** (DM) | 3 | |
NDT650 | Boeing Standard, 767 PART6 57-04-01, Drawing No. FIG 2 | 1 | |
NDT688 | Boeing Standard, 767 PT4 57-50-03:PG8 FIG2 **** USE NEW DRAWING**** | 3 | |
P/N: 171 865 | QTY, 1 EA NUTADAPTOR;OEM P/N: BL171865D18570.0703OEM: SPXL/SPIETHOEM P/N: 171 865OEM: BRAN LUEBBE;DRAWING: SA-JER-AR141-ARBX-270013 (H3-OA3)POS: NO.40;MATERIAL: CARBON STEELMATERIAL GRADE: 5.8;THREAD DIAMETER: M16THREAD PITCH: 1.5 MMTHREAD SERIES: METRI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PDL 1034 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, ENGRAVE PER DRAWING STANDARD | 1 | |
PDL 1034/1040 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard + Guide | 1 | |
PDL 1034J | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, ENGRAVE PER DRAWING STANDARD | 1 | |
PDL 1034J/1040J | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26 & PG27, ENGRAVE PER DRAWING, STANDARD + GUIDE | 2 | |
PM81458 | Box COMPLETE WITH WOODEN BLOCKS AS PER DRAWING | 1 | |
PRE65B94003 | PLUG - FAN REVERSER EXIT NOZZLE, CF6-50 ENGINE (SPECIFICATION DRAWING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107103 | KIT,DRAWINGS-ALL 4 MOUNT SUPPORTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA23985 | DRAWING WRENCH_[PWA23985] | 1 | |
PWC31217 | ICD,DRAWING ONLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC90034 | RIVETER SOURCE CONTROL DRAWING | 3 | |
RH-4-37 | 4-37 Reference Standard, 7075-T6 Aluminum, per drawing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S41-E1A | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1A NDI REF STD PER DRAWING SK667-00011. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S41-E1C | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-E1C NDI REF STD PER DRAWING SK667-00012. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S41-F1B | BOEING CUSTOM REFERENCE STANDARD MCU ESM S41-F1B NDI REF STD PER DRAWING SK667-00010. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SB 146/53-167/2 | BAE 146-RJ SERIES REFERENCE STANDARD ISB.53-167 APPENDIX 2 DRAWING 15, PAGE 23&24. Material: Substitute 2024-T3 Clad for 2014A-T4 Aluminum. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SLS-123456-SS304 | BOEING REFERENCE STANDARD PER DRAWING STD-1. MATERIAL: 304 STAINLESS STEEL. CHEMICAL CONVERSION COATING PER MIL-DTL-5541, CLASS 1A. Includes Certification Traceable to NIST and Material Certs. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SN11570000 | MD-11 Access Door Cutout, DRAWING SN11570000:SHEET9 FIG2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SO111-7 | Custom FOKKER F28 Horizontal Stab. Drive Junction Fitting Eddy Current Standard per drawing # 28. 0-3210/2610-Material: 7075-T6. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-267 | Wrench - Spanner, Adapter For BACN10RF Nuts. (See ST2580-267 Drawing For Correct Dash Number) | 13 | |
ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STANDARD-A1 | .050" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STANDARD-A2 | .080" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STANDARD-A3 | .125" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STANDARD-B | 2/64" FLAT BOTTOM HOLE EQUIVALENT SURFACE NOTCH STANDARD (*ABOVE DESCRIPTION MUST BE ENGRAVED ON THE REFERENCE STANDARD) ..DRAWING "B" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) MATERIAL=7075-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-1-TI | Custom Radius Channel Standard Material: 6AL-4V Titanium. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B00112 | PRESSURE TEST SEAL PLUG INSTALLATION DRAWING WING SECTION 12 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TOILET TEST BOX | TOILET CUBICLE TEST BOX AND DRAWINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TRS-6-12A | Custom 6 Step Wedge .020", .040", .080", .150" ,0.300", 0.600" +/-.001", Per Drawing Specification TXX003503. Material: 2219-T81 Aluminum. Includes Teflon Base. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TRS-6-12I | Custom 6 Step Wedge .040", .050", .060", .075" ,0.090", 0.110" +/-.001", Per Drawing Specification TXX003461. Material: 718 Inconel. Includes Teflon Base. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.