| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CF6-80C2 | CF6-80C2 | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) G71001-181 | Bootstrap Eqpt - CF6-80C2B Engine (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) G78003-53 | SLING EQPT FAN REVERSER CF6-80C2B ENGINE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 017610P33 | GUIDE CF6-80C2 | 1 | |
| 110059-501 | UNIVERSAL BASE STAND, CF6-80C2B7F | 3 | |
| 110350-501 | STAND,SHIP,ENGINE LOW PROFILE (HYD BASE) CF6-80C2B7F | 2 | |
| 111325-2 | CRADLE - ENGINE, CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 111325-3 | CRADLE - ENGINE, CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 140159-6 | BASE FOR CF6-80C2 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14130G08 | FIXTURE, ENGINE MODULE LIFT CF6-80C2. | 2 | |
| 2C14130G09 | FIXTURE, ENGINE MODULE LIFT CF6-80C2 | 2 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14155P06 | COVER PLATE - IDG, GE CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14726G03 | FWD ADAPTOR SET PEDESTAL CF6-80C2 | 1 | |
| 2C14729G01 | ADAPTOR SET PEDESTAL -ENG.AFT CF6-80C2 | 3 | |
| 2C14963G04 | NGINE TRIM BALANCE KIT CF6-80C2 FADEC (CABLES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14965P01 | ANALYZER - TRIM BALANCE, CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14965P02 | ANALYZER - TRIM BALANCE, CF6-80C2 ENGINE | 1 | |
| 2C14974G01 | UNIT, ENGINE PRESERVATION HMU CF6-80C2 | 1 | |
| 2C14974G02 | UNIT, ENGINE PRESERVATION HMU CF6-80C2 | 2 | |
| 2C14975 | TEST CELL FILTER CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C15066 | (RT) FIXTURE - CF6-80C2 ONLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C15618G01 | CF6-80C2 OEM FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6388G06 | BORESCOPE - FIBER OPTIC, CF6-80A/A2 AND CF6-80C2B ENGINES, INTRINSICALLY SAFE (APPROVED FOR USE IN CLASS I, DIVISIONS I & II HAZARDOUS LOCATIONS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6388G07 | BORESCOPE - FIBER OPTIC, CF6-80A/A2 AND CF6-80C2B ENGINES, INTRINSICALLY SAFE (APPROVED FOR USE IN CLASS I, DIVISIONS I & II HAZARDOUS LOCATIONS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3195E-01 | CF6-80C2 ENGINE STAND | 1 | |
| 3195 | CF6-80C2 Engines | 5 | |
| 14965 | A NALYZER, ENGINE TRIM BALANCE CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 767-GE-CF6-2V | COVER INLET (ENGINE CF6-80C2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80C2720901K1M1TK | No.4RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 80C2720901K2M1TK | No.6RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 98D54503000000 | HOLD OPEN SET - THRUST REVERSER COWL, CF6-80C2B ENGINE | 20 | |
| A20004-68 | SET - RIG PIN, CF6-80A AND CF6-80C2B ENGINES | 12 | |
| A24010 | DISPATCH EQUIPMENT IDG,CF6-80A AND CF6-80C2 ENGINE | 1 | |
| A24010-1 | DISPATCH KIT - INTEGRATED DRIVE GENERATOR, CF6-80A AND CF6-80C2 ENGINES | 3 | |
| A27011-263 | BOOTSTRAP KIT CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27063-107 | ADAPTER CABLE - TLA (FOR FADEC GE-CF6-80C2F ENGINES) | 2 | |
| A36004 | INSTALLATION EQPT CF6-80C2B BALL JOINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A36004-15 | Installation Equipment -Cf6-80C2B Ball Joint | 5 | |
| A36004-20 | INSTALLATION EQUIPMENT CF6-80C2B BALL JOINT | 6 | |
| A54001-165 | SLING - STRUT UNLOAD SLING, ENGINE ON-WING, CF6-80C2 | 3 | |
| A54001-168 | SLING - STRUT UNLOAD SLING, ENGINE ON-WING, CF6-80C2 | 9 | |
| A54003-42 | SLING EQUIPMENT - STRUT REMOVAL AND INSTALLATION (CF6-80C2) | 12 | |
| A71011-263 | Bootstrap Eqpt CF6-80C2B | 1 | |
| A71011-332 | BOOTSTRAP EQUIPMENT-GENERAL ELECTRIC (CF6-80C2B) | 11 | |
| A71035-27 | COVER - BLEED VALVE, CF6-80C2B | 9 | |
| A71035-28 | CUBIERTA PARA CF6-80C2B B-747/300 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71051-1 | TRANSPORTATION AND STORAGE PALLET - INLET COWL, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A73002 | WRENCH MAIN ENGINE CONTROL CF6-80C2 REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A73002-10 | WRENCH - MAIN ENGINE CONTROL, CF6-80C2, REMOVAL/ INSTALLATION | 7 | |
| A78013-11 | SLING - EXHAUST NOZZLE, 747/PW4000 OR 767/CF6-80C2 | 5 | |
| A78013-22 | SLING - EXHAUST NOZZLE, 747/PW4000 OR 767/CF6-80C2 | 7 | |
| A78017-1 | SLING - CORE COWL, CF6-80C2B ENGINE | 6 | |
| A78018 | SLING – THRUST REVERSER TRANSLATING SLEEVE, CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A78018-11 | SLING - THRUST REVERSER TRANSLATING SLEEVE, CF6-80C2 | 12 | |
| AFS-0577-1 | CUSTOM 5MHz 30° .187" X .187" BACK SHOOTING ANGLE BEAM TRANSDUCER FOR THE 767 CF6-80C2 ENGINE STRUTS. USED WITH REFERENCE STANDARD 767 NDT674 54-50-06 PART 4 FIGURE 3. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM-1928-155 | ENGINE STAND CF6-80C2 | 5 | |
| AM-1928-156 | CF6-80C2 CRADLE | 6 | |
| AM-1928-156-80C2A | CF6-80C2 CRADLE WITH A300/310 | 1 | |
| AM-1928-900 | ADAPTER, BOOTSTRAP, CF6-80C2 | 1 | |
| AM-1994 | BASE-CF6-80A+CF6-80C2 ENGINE HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM-2265 | CF6-80C2 Base and Cradle Assembly (Top Level) | 1 | |
| AM-2305 | MD-11 BOOTSTRAP FOR CF6-80C2, MANUAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM-2538 | CF6-80C2 Base and Cradle Assembly (Top Level) | 1 | |
| AM1928 | CF6-80C2 BASE AND CRADLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM1928-155 | AGSE ENGINE STAND - CF6-80C2B1F | 5 | |
| AM1928-156 | CF6-80C2B/F ENGINE TRANSPORTATION STAND, WITH FITTINGS FOR BOOTSTRAP | 6 | |
| AM2690-1500 | CF6-80C2 ENGINE BASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B747-103 | INTAKE COVERS, GE CF6-80C2 engine, Equiv. to P/N: RSE-101A Forward Engine Cover (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B747-150 | INTAKE PLUGS, GE CF6-80C2 (single fold style) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B747-205 | BYPASS VENT, & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (set of 16) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B747-206 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B747-209 | EXHAUST NOZZLE CAPS, GE CF6-80C2 Engines (set of 4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B767-115 | INTAKE COVERS, GE CF6-80C2 ENGINE, ATTACHES TO BYPASS T.E. WITH PADDED HOOKS (SET OF 2) | 1 | |
| B767-116 | INTAKE COVERS, GE CF6-80C2 ENGINE, ATTACHES TO NACELLE WITH BALL LOCK PINS IN EXISTING HOLES (SET OF | 1 | |
| B767-201 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines, includes nozzle cover (set of 8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B767-203 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 3) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B78001-2 | Dispatch Lock Kit 757, 767 x/CF6-80C2B & 747-400 w/PW4000 Engines | 15 | |
| CF6-80C2 | CF6-80C2 ENGINE STAND | 3 | |
| CF6-80C2 & 80A2 STAND | CF6-80C2 & 80A2 STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 & 80A2 | CF6-80C2 & 80A2 Engine Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 & 80A2 Engine Stand | CF6-80C2 & 80A2 Engine Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 & A2 | CF6-80C2 & A2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 & A2 | CF6-80C2 & A2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 ENGINE STAND | CF6-80C2 ENGINE STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 Engine Stand | CF6-80C2 Engine Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 Fwd Arm 17" (OEM) | CF6-80C2 Fwd Arm 17" (OEM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2 Inlet Cover | COVER - INLET, CF6-80C2 ENGINE | 1 | |
| CF6-80C2 STAND | CF6-80C2 STAND | 6 | |
| CF6-80C2 TR | CF6-80C2 THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2(OEM) | CF6-80C2(OEM) Engine Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2(OEM) Engine Stand | CF6-80C2(OEM) Engine Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2-ENGINE-ROLL-STAND | CF6-80C2 (ROLL STAND) ENGINE STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CF6-80C2D1F | CF6-80C2D1F ENGINE STAND | 3 | |
| DZZ7318-1 | SLING-T/R CF6-80C2 | 1 | |
| DZZ7349-501 | **CF6-80C2 THRUST DOOR ACTUATO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F70023-1 | CF6-80C2 Engine Stand Base | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FB71002-34 | CF6-80C2 ENG STAND FWD ADPATOR ASSY (B767/B744) | 1 | |
| FB71002-48 | CRADLE ASSY CF6-80C2 ENGINE B767,B747, | 2 | |
| G24005-24 | DISPATCH EQUIPMENT - IDG, CF6-80C2 ENGINE | 4 | |
| G26009-88 | Plug Kit (CF6-80C2B) | 2 | |
| G28018-33 | Fitting assy CF6-80C2/PW4000/GENX-2B | 2 | |
| G28018-6 | FITTING ASSEMBLY - MANIFOLD, FUEL FEED (GENX-2B, CF6-80C2, PW4000, OR GE9X ENGINES) | 4 | |
| G28018-65 | FITTING ASSY CF6-80C2/PW4000/GENX-2B/GE9X | 2 | |
| G29003-8 | DISPATCH EQUIPMENT - ENGINE DRIVEN HYDRAULIC PUMP, CF6-80C2 | 5 | |
| G54007-93 | MOUNT, BASE PLATE - CF6-80C2 ENGINE | 6 | |
| G54008-68 | REMOVAL/INSTALLATION KIT, FUSE PIN - PW4000 AND CF6-80C2 ENGINES | 5 | |
| G71001 | BOOTSTRAP EQPT -0 CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71001-141 | Bootstrap Equipment CF6-80C2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71001-181 | Bootstrap Eqpt - CF6-80C2B Engine | 15 | |
| G71001-181-M | BOOTSTRAP EQPT CF6-80C2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71002 | CRADLE-CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71002-1 | HOLD OPEN EQUPT. CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71002-45 | CRADLE- ENGINE, CF6-80C2ENGINE | 1 | |
| G71002-48 | CRADLE- ENGINE, CF6-80C2ENGINE | 10 | |
| G71007 | SLING EQPT-INLET COWL CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71007-28 | ENGINE INLET COWL SLING CF6-80C2B | 12 | |
| G71008-1 | PROOF LOAD EQUIPMENT - CRADLE, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71010-68 | SLING, CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71010-80 | Sling - Eng Hand CF6-80C2B | 9 | |
| G71012-107 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71012-116 | LOCATING JIG -0 EBU TO STRUT, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71012-138 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71012-139 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71012-140 | LOCATING JIG - ENGINE BUILDUP TO STRUT, CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71012-141 | JIG - EBU (767/CF6-80C2B FADEC ENGINE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71013 | SLING-FAN COWL CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71013-1 | Sling -Fan Cowl. Cf6-80C2B Engine | 10 | |
| G71022 | HOLD OPEN EQPT-ENGINE FAN/CORE COWL,CF6-80C2B | 1 | |
| G71022-54 | Hold Open Equipment -Engine Fan/Core Cowl. Cf6-80C2B | 8 | |
| G76001 | PIN SET -0 RIGGING, ENGINE CONTROLS, CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G76001-1 | PIN SET - RIGGING, ENGINE CONTROLS, CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78002 | HOLD OPEN SET-THRUST REVERSER COWL,CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78002-1 | HOLD OPEN SET - THRUST REVERSER COWL, CF6-80C2B ENGINE | 13 | |
| G78002-3 | HOLD OPEN TOOL CF6-80C2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78003 | SLING EQPT-FAN REVERSER,CF6-80C2B ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78003-53 | SLING EQUIPMENT - FAN REVERSER, CF6-80C2B ENGINE | 13 | |
| G78006 | DOLLY-THRUST REVERSER CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G78006-74 | THRUST REVERSER STAND (CF6-80C2B) (LEFT SIDE & RIGHT SIDE) | 9 | |
| G78006-75 | DOLLY - THRUST REVERSER, CF6-80C2 ENGINE | 9 | |
| GE8094 | CF6-80C2 ENGINE STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J10007-56 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 CF6-80C2) | 1 | |
| J54001-74 | MOUNT, BASE PLATE - (CF6-80C2 AND CF6-80A ENGINES) | 4 | |
| J78006-74 | DOLLY, T/R, CF6-80C2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP-CF6-D-4037 | CF6-80C2 ENGINE WASH X2 PROBE TOOL | 1 | |
| JMP/CF6/D/4037 | (PORT & STARBOARD) CF6-80C2 SHORT ENGINE PROBES | 1 | |
| JMP/CF6/D/4037/BRACKETS | (Port & Starboard) CF6-80C2 Engine Probe Brackets Only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CF6/D/4037/FITTINGS | (Port & Starboard) CF6-80C2 Engine Probe Fittings Only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CF6/D/4037/TUBES | (Port & Starboard) CF6-80C2 Engine Probe Tubes Only | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CF6/D/6418 | Engine Probe (MDC)MD-11, Airbus A300, A310 CF6-80C2 D1F/A5F/A5/A3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JMP/CF6/D/6511 | CF6-80C2 LONG ENGINE PROBES | 1 | |
| JMPCF6D4037 | PROBES - SHORT, WATER WASH, CF6-80C2 ENGINE | 1 | |
| JXHK-GB-1245 | CF6-80C2 ENGINE STAND | 1 | |
| K10003-21 | Dispatch equipment-idg，CF6-80C2 engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LMC18G87 | SPL-5246 - COVER - INLET, CF6-80C2 ENGINE | 3 | |
| LMC18G87-K | COVER INLET CF6-80C2 ENGINE SET OF 2 | 1 | |
| LMC18G87B | COVER CF6-80C2 ENGINE INLET | 1 | |
| LMC18G87B/LMC19G87 | COVER CF6-80C2 ENGINE SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LMC19G87 | COVER CF6-80C2 ENGINE EXHAUST | 4 | |
| LMC19G87. | COVER CF6-80C2 ENGINE EXHAUST | 4 | |
| LMC24G87 | PLUG - DISCHARGE, CF6-80C2 ENGINE FAN THRUST REVERSER AIR | 2 | |
| LMC24G87-1 | PLUG - DISCHARGE, CF6-80C2 ENGINE FAN THRUST REVERSER AIR (LEFT) | 1 | |
| LMC24G87-2 | Plug - Discharge, CF6-80C2 Engine Fan Thrust Reverser Air (RIGHT) | 1 | |
| NGCF68200 | CF6-80C2 ENGINE STAND | 2 | |
| NGCF68300 | CF6-80C2 ENGINE STAND | 1 | |
| NGCF68400 | CF6-80C2/E1 ENGINE STAND | 2 | |
| RFENGSTDCF680ACX1 | CF6-80C2 Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1021-3 | DOLLY-NOSE COWL (CF6-80C2, FADEC AND NONE FADEC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RSE1028 | CF6-80C2 Fan Cowl Dolly | 2 | |
| RSE1037 | Pin Locating Fan & Core Cowl Hinges (CF6-80C2) | 4 | |
| RSE1039 | CF6-80C2 Core Cowl Dolly | 2 | |
| RSE1196 | ALIGNMENT TOOL (CF6-80C2) | 2 | |
| RSE1197 | ALIGNMENT TOOL (CF6-80C2) | 1 | |
| SMIG277CR80 | CF6-80C2 ENGINE CRADLE - B747 & A300/310 TO BE USED WITH TROLLEY TMH ET06 OR ET07 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMH BS58 | Hold Open Brace - CF6-80C2 (Superceedes 98A71101506001) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMH EC07 | Engine Cradle 90 - CF6-80C2/E1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMH EC07-00-00 | ENGINE CRADLE 90 - CF6-80C2/E1 | 2 | |
| TMH EC08-00-00 | Engine Cradle 90 - CF6-80C2 | 2 | |
| TMHBS58 | Hold Open Brace - CF6-80C2 (Superceedes 98A711015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMHBS58-00 | Hold Open Brace - CF6-80C2 (Superceedes 98A711015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMHBS58-00-00 | BRACE-HOLD OPEN COWLS (GE CF6-80C2) | 2 | |
| TMHEC07-00-00 | ENGINE CRADLE 90 - CF6-80C2/E1 | 2 | |
| TMHEC08-00-00 | ENGINE CRADLE 90 - CF6-80C2 | 2 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
