Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
AGE11855 | ASSEMBLY, TOOL | 2 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
109-3101-86-101 | TOOL ASSEMBLY, FLOATING RING CENTERING | 1 | |
109-3101-87-113 | TOOL ASSEMBLY, MAIN ROTOR GRIP BRUSHING REMOVAL/IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3130-87-105 | TOOL ASSEMBLY, TAIL ROTOR HUB BUSHINGS INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-38-1 | TOOL ASSEMBLY, FREEWHEEL INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-68-1 | TOOL ASSEMBLY, FREEWHEEL NUT REMOVE/INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-79-1 | TOOL ASSEMBLY, DRIVE QUILL SEAL INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-80-1 | TOOL ASSEMBLY, DRIVE QUILL SEAL INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-82-1 | TOOL ASSEMBLY, PUMP SEAL REMOVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3400-95-1 | TOOL ASSEMBLY, 90° GEARBOX OUTPUT SHAFT SEAL REMOV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3501-03-1 | AW109 TOOL ASSEMBLY, NLG WHEEL ASSEMBLY/DISASSEMBL | 1 | |
109-3501-04-1 | TOOL ASSEMBLY, MAIN LANDING GEAR WHEEL ASSEMBLY/DI | 1 | |
109-3600-30-101 | TOOL ASSEMBLY, ENGINE LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12MIT65B01231-1 | INSTALLATION TOOL - RESTRICTOR SUPPORT TUBE ASSEMBLY, BODY LANDING GEAR | 1 | |
139W00-115-70 | LINKED MARKING TOOL ASSEMBLY, UPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
139W00-115-71 | LINKED MARKING TOOL ASSEMBLY, LOWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1525-502 | TOOL, ASSEMBLY, WORN WHEEL/BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16A14229L1-1 | TOOL ASSEMBLY, HOLDING-ISA RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9302G02 | TOOL SET, ASSEMBLY, INSTALL -BALANCE PISTON SEALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9353 | TOOL SET ASSEMBLY, RIGGING- BY-PASS VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294792-1 | ALIGLLINENT TOOL ASSEMBLY, BEARING HOUSING AND HOUSING AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
330A93-3403-201 | TOOLING ASSEMBLY,LOADING (ICO 13-10-70-05) STRIP0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330A93-3403-211 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING REDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330A93-3410-02 | TOOLING ASSEMBLY,HANDLING,N°3 (ICO 13-10-10-03) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A93-3501-00 | TOOLING ASSEMBLY,HANDLING,N°5 (ICO 13-10-10-05) SLING,PLANET G | 1 | |
332A93‐3686‐01 | TOOLING ASSEMBLY,LOADING (ICO 13-10-70-05) STRIP0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A94-2790-00 | TOOLING ASSEMBLY,MECH ASSY VAR ,N°1 ICO 13-30-30- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A94-3182-00 | TOOLING ASSEMBLY,LANDING GEAR (ICO 13-30-90-02) C | 1 | |
332A95-5290-00 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) ASSEMBLY BLOCK | 1 | |
332A97-5205-001 | TOOLING ASSEMBLY,IGB (ICO 13-30-50-01) BASE0001-9999 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6200G02031 | TOOL KIT, SWASHPLATE ASSEMBLY, CASE 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6205G13831 | TOOL KIT, SWASHPLATE ASSEMBLY, CASE 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4617001955 | TOOL - DISASSEMBLY, UNIVERSAL IMPELLOR | 1 | |
56603S0000 | ASSEMBLY, DISASSEMBLY TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62100-2501 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62100-2502 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 40 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62100-2601 | Lower Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62100-2602 | Upper Alignment Tool for 1.27mm Pitch Receptacle, Press-Fit Assembly, 80 Circuits | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-8669 | Press-In Tool for Power Module Assembly, 6-Pair Assemblies | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9501 | Tool Holder for Backplane Assembly, 24.00mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9502 | Tool Holder for Backplane Assembly, 72.00mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9503 | Tool Holder for Backplane Assembly, 156.00mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9504 | Tool Holder for Backplane Assembly, 216.00mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9509 | Tool Holder for Backplane Assembly, 254.00mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9511 | Tool Holder for Backplane Assembly, 304.80mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
62201-9512 | Tool Holder for Backplane Assembly, 406.40mm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N°1 (ICO 13-10-00-01) HOISTING SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
716233 | TOOL ASSEMBLY, DISSEMBLY NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7MIT65B01503 | TOOL INSTALLATION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
8007885100 | TOOL - TEMPLATE, CHECKING ASSEMBLY,BLADE EROSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
895-3101-32-101 | TOOL ASSEMBLY, REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
895-3101-33-101 | TOOL ASSEMBLY, STAKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8MIT65B01503 | TOOL, COMPRESSION - CAP RING, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
9970-957-141 | Tool Set, Assembly/Disassembly, Lubrication Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C3133G01 | REMOVAL TOOL - CLAMP ASSEMBLY, HORIZONTAL DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C3133G02 | Removal Tool - Clamp Assembly, Horizontal Drive Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABB999-30SE1 | Tool -Removal, Fuel Filter Assembly, GE90-70/80/90 Series And GE90-100 Series | 2 | |
AGE14923 | ASSEMBLY, TOOL, STATIC TORQUE CHECK | 3 | |
AJ65B91267 | TOOL - JIG, PT2 PROBE ASSEMBLY, JT9D ENGINE INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT31791 | TOOL ASSEMBLY, MLG | 1 | |
AT55769-102 | TOOL-ASSEMBLY,RETAINER RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27026-24 | TEST FIXTURE, BRAKE ASSEMBLY, STABILIZER TRIM ACTUATOR TOOL | 6 | |
CHA1898-0078 | ASSEMBLY, PROOFING AND EXTRACTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CHA1898-0115 | ASSEMBLY, PROOFING AND EXTRACTION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D15431432001 | NOSE ASSEMBLY,FASTENER INSTALLATION TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F1406231 | ASSEMBLY,TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F1481038 | ASSEMBLY,TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80049-56 | TOOL, LOCK ASSEMBLY, FLIGHT CONTROLS, B737 | 16 | |
F80216-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | 3 | |
FTTT-3-0-3 | ASSEMBLY, TRIMMING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FTTT-483-A-O | ASSEMBLY, TRIMMING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J71063-1 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 2 | |
LTCT14759-01 | TOOL ASSEMBLY, NO. 1 BEARING AND HOUSING, AND NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LTCT14769-01 | Tool Assembly, Fan Exit Vane Assembly, Removal/Installation | 1 | |
LTCT4968-01 | TOOL ASSEMBLY, NO. 2 BEARING PACKAGE INSTALLATION | 2 | |
LTCT5970-01 | Staking Tool Assembly, Ring Gear Lock Cup | 1 | |
LTCT7534-01 | UNLOCKING TOOL ASSEMBLY, RING GEAR LOCK CUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LTCT7660-01 | Tool Assembly, Compressor Blades Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M0NT133810 | TOOL ASSEMBLY, DISASSEMBLY NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MG174-04 | TOOL - DISASSEMBLY, UNIVERSAL IMPELL | 35 | |
MIT65-56638-1 | MISCELLANEOUS TOOL - SUPPORT ASSEMBLY, TRANSMITTER, FLAP POSITION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B01970 | RESTRAINING TOOL - AFT FLAP ASSEMBLY, OUTBOARD TRAILING EDGE FLAPS | 2 | |
MIT65B04008 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 8 | |
MIT65B09877-1 | TOOL - SPRING CARTRIDGE ASSEMBLY, BULK CARGO DOOR | 2 | |
MIT65B81119 | MISCELLANEOUS TOOL - POWER PACK ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
MIT65B81120 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B81121 | MISCELLANEOUS TOOL - ANGLE GEARBOX ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
MIT65B81132 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
MIT65B81133 | MISCELLANEOUS TOOL - POWER UNIT ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
MIT65B81175 | MISCELLANEOUS TOOL - CLUTCH ASSEMBLY, AUTOTHROTTLE ENGINE CONTROL | 3 | |
PWC30766 | TOOL, ASSEMBLY, FUEL NOZZLE STRAINER RETAINING RING | 3 | |
RB T102095 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 2 | |
RBE332A94-2790-00 | TOOLING ASSEMBLY,MECH ASSY VAR ,N°1 (ICO 13-30-30-03) BONDING | 1 | |
RBE703A93-0010-00 | TOOLING ASSEMBLY,HANDLING,N°1 (ICO 13-10-00-01) HOISTING SLING | 1 | |
RBT102093 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 1 | |
RBT400209-D2 | Drive and Sump Assembly, Input Quil Backlash Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3101-86-101 | TOOL ASSEMBLY, FLOATING RING CENTERING | 1 | |
RBW109-3101-87-113 | Tool Assembly, Main Rotor Grip Brushing Removal/Install | 1 | |
RBW109-3130-78-103 | Tool Assembly, Seal Housing Disassembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3130-78-105 | Tool Assembly, Seal Disassembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3130-87-103 | Tool Assembly, Tail Rotor Hub Bushings Removal | 1 | |
RBW109-3130-87-105 | TOOL ASSEMBLY, TAIL ROTOR HUB BUSHINGS INSTALLATION | 1 | |
RBW109-3400-38-1 | Tool Assembly, Freewheel Install | 1 | |
RBW109-3400-68-1 | Tool Assembly, Freewheel Nut Remove/Install | 1 | |
RBW109-3400-79-1 | Tool Assembly, Drive Quill Seal Install | 1 | |
RBW109-3400-80-1 | Tool Assembly, Drive Quill Seal Install | 1 | |
RBW109-3400-82-1 | Tool Assembly, Pump Seal Remover | 1 | |
RBW109-3400-95-1 | Tool Assembly, 90° Gearbox Output Shaft Seal Removal | 1 | |
RBW109-3401-68-107 | Packing Assembly, Tool Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3401-69-103 | Tool Assembly, Packing Holder Disassembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3401-69-105 | Tool Assembly, Packing Disassembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW109-3501-03-1 | AW109 TOOL ASSEMBLY, NLG WHEEL ASSEMBLY/DISASSEMBLY | 2 | |
RBW109-3501-04-1 | Tool Assembly, Main Landing Gear Wheel Assembly/Disassembly | 2 | |
RBW109-3600-30-101 | Tool Assembly, Engine Lifting | 2 | |
RBW109-3600-34-101 | Tool Assembly, Engine Hoisting | 1 | |
RBW895-3101-25-101 | Tool Assembly, Bearing Staking | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW895-3101-26-101 | Tool Assembly, Bearing Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW895-3101-27-101 | Tool Assembly, Bearing Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW895-3101-32- 101 | TOOL ASSEMBLY, REMOVAL | 1 | |
RBW895-3101-32-101 | Tool Assembly, Removal | 1 | |
RBW895-3101-33- 101 | TOOL ASSEMBLY, STAKING | 1 | |
RBW895-3101-33-101 | Tool Assembly, Staking | 1 | |
ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST9999CL-201 | STANDARD TOOL - COWL LATCHING ASSEMBLY, ENGINE COW | 4 | |
T102093 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 1 | |
T103206-101 | RIGGING TOOL ASSEMBLY, TAIL ROTOR CONTROLS | 1 | |
T103281-101 | TOOL ASSEMBLY, CYCLIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103281-102 | TOOL ASSEMBLY, CONTROLS RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103286-101 | TOOL ASSEMBLY, CYCLIC CONTROLS RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103287-101 | TOOL ASSEMBLY,COLLECTIVE | 1 | |
T103287-111 | TOOL ASSEMBLY, COLLECTIVE LEVER POSITIONING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103288-101 | TOOL ASSEMBLY, CYCLIC CONTROLS RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103347-101 | TOOL ASSEMBLY, PILOTS CYCLIC STICK CENTERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103356-101 | TOOL ASSEMBLY, CYCLIC CONTROLS POSITION SENSOR RIGGING | 2 | |
V802 | SAMPLER DRAIN TOOL ASSEMBLY, FUEL SUMP | 2 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.