Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
2C14290 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14854G02 | ADAPTER - TORQUE | 3 | |
2C91183 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
460006228 | ADAPTER - TORQUE | 14 | |
460006404 | ADAPTER - TORQUE | 17 | |
460007229 | ADAPTER - TORQUE | 9 | |
460007229 | ADAPTER - TORQUE | 9 | |
460007230 | ADAPTER - TORQUE | 27 | |
5MIT65B01500-1 | ADAPTER - TORQUE | 2 | |
6796999 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49209001000 | ADAPTER - TORQUE | 5 | |
DAH600865 | ADAPTER - TORQUE | 3 | |
FRDH141 | ADAPTER - TORQUE | 12 | |
J27022-1 | ADAPTER - TORQUE | 8 | |
KIT9190 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85862 | ADAPTER - TORQUE | 6 | |
SRES30 | ADAPTER - TORQUE | 3 | |
T-453305 | Adapter - Torque | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
008407 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
10113 | TORQUE ADAPTER PROP BOLTS-5/8" HEAD ATA 61 | 15 | |
098736 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT (TORQIE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1045G02 | ADAPTER, ANTI - TORQUE - FAN STATOR TO FAN DISK, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1268 | ADAPTER - TORQUE - BOOSTER TO F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
112-52-0001 | TOOL - MISCELLANEOUS, TORQUE TOOL ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3204 | ADAPTER - TORQUE LOCKNUT - NO 1 BRG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3447P01 | ADAPTER, TORQUE - OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4565 | ADAPTER - TORQUE LPT SHAFT TO ELECTRONIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11MIT65B01231-1 | TORQUE ADAPTER -0 BEARING | 1 | |
12ME65B02000 | ADAPTER - TORQUE, INBOARD TRAILING EDGE FLAP, MAIN CARRIAGE | 8 | |
12MIT65B00141 | TOOL - MISCELLANEOUS, TORQUE TOOL ADAPTER | 4 | |
14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 6 | |
14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 6 | |
14PF465KIT | SPLINE ADAPTER - TORQUE TUBE | 2 | |
17A1513P01 | U-SHAPED TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
19MIT65B01211-1 | ADAPTER - TORQUE, NUT, SHOCK STRUT, WLG UPPER | 1 | |
1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9626 | TORQUE ADAPTER - PRESSURE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9626G01 | TORQUE ADAPTER, PRESSURE TUBE/COUPLING NUT-HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
21940-00 | TORQUE WRENCH ADAPTER-BATTERY CAP | 1 | |
23055724 | ADAPTER,WRENCH-1GV TORQUE TUBE | 4 | |
23068546 | ADAPTER - WRENCH, VARIABLE VANE TORQUE TUBE ASSEMBLY | 1 | |
23083893 | ADAPTER: TORQUE,B-NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5079 | ADAPTER - NUT - TORQUE - NO. 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5111 | TORQUE ADAPTER-COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
28-0-1380 | Torque Adapter- Nose Wheel Axle Nuts | 5 | |
28-0-4893 | TORQUE ADAPTER SLIP-CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
28.0.4893 | TORQUE ADAPTER SLIP-CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-005 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-005A | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-010 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-010A | ADAPTER, HI-TORQUE | 1 | |
291B300-015 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-015A | ADAPTER, HI-TORQUE | 1 | |
291B300-HT3 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-HT4 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-HT5 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G05 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 3 | |
2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 1 | |
2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
2C14664 | TORQUE ADAPTER SET - RET NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
2C14685 | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14685G01 | ADAPTER-ANTI-TORQUE STOP ARM | 2 | |
2C14854G02 | ADAPTER - TORQUE, ENGINE FUEL FILTER | 3 | |
2C18020G02 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5838G01 | ADAPTER - TORQUE FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81407 | HPT, LOCKNUT-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81407G04 | HPT, LOCKNUT-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81463 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81463G01 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81464 | ADAPTER TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81464G01 | ADAPTER TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81625P01 | ADAPTER-TORQUE, LOCKNUT, (TORQ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
2C91169G01 | ADAPTER-TORQUE LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91183G01 | ADAPTER-TORQUE LPT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91191G01 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91217G01 | ADAPTER-TORQUE-LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65-27535 | TORQUE ADAPTER-AILERON CONTROL COLUMN,CAPTAINS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B01203 | TORQUE ADAPTER -0 RETAINER NUT | 2 | |
2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
2MIT65B80307 | ADAPTER - PROTRACTOR CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 1 | |
2MIT65B81129 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER | 2 | |
2MIT65B81276-1 | ADAPTER, TORQUE WRENCH - BEARING RETAINER NUT | 1 | |
2MIT65B82106 | Torque wrench adapter-aileron control | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B82215 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER, AILERON FORCE LIMITER | 2 | |
2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3402822-1 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
3402822-3 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
3402822-5 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
362-04180A | TORQUE - ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
369D29826 | 4 BLADE TAIL ROTOR NUT #369D21716-5 TORQUE WRENCH ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3961919-1 | ADAPTER-TORQUE AUTO THROTTLE DISCONNECT SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3981305-1 | Adapter-MLG axle nut torque | 4 | |
3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 9 | |
3MIT65B40627 | ADAPTER - TORQUE, NOSE LANDING GEAR BUILDUP | 1 | |
3MIT65B82585 | ADAPTER - TORQUE, NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
4,6E 08 | MLG ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
407-MR-F-01 | ANTI-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4916706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
4916706 REV P | ADAPTER - TORQUE MLG AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4916706-527 | Adapter - Torque, MLG Axle Nut | 5 | |
4916706-531 | Adapter-torque,main landing gear axle nut | 2 | |
4916745-501 | Adapter-torque,main gear door cylinder jam nut | 8 | |
4916759-501 | Adapter - Torque, MLG | 1 | |
4916787-1 | TORQUE ADAPTER - PASSENGER DOOR | 6 | |
4916790-1 | Adapter-torque restrictor support,NLG | 5 | |
4916799-501 | Adapter-Torque, Slat Cyl Jam | 2 | |
49I6706 | ADAPTER - TORQUE MLG AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE | 8 | |
4MIT65B04308 | TORQUE ADAPTER - CARGO DOOR MECHANISM | 3 | |
4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5936856-1 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5936856-501 | ADAPTER-TORQUE | 2 | |
5955282-1 | Adapter Assy - Torque, MLG Trunnion Bolt | 4 | |
5962528-501 | ADAPTER - TORQUE TAILCONE RELEASE | 3 | |
5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 2 | |
5MIT65B01502 | Torque adapter-retract actuator B.L.G. | 1 | |
5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5MIT65B81129 | ADAPTER - TORQUE WRENCH | 2 | |
6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
6796891 | ADAPTER - TORQUE REDUCTION GEAR FILTER | 3 | |
6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797775 | ADAPTER FRONT-TORQUEMETER & SAFETY COUPLING | 1 | |
6797776 | ROLLS-ROYCE ALLISON ADAPTER REAR TORQUEMETER & SAFETY COUPLING ASSY | 2 | |
6799877 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET | 1 | |
6799878 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET PHASE DETECTOR | 1 | |
460006228 | ADAPTER- TORQUE | 14 | |
460006229 | ADAPTER-TORQUE | 2 | |
460006404 | ADAPTER-TORQUE | 17 | |
460007196 | Torque Adapter- | 5 | |
460007229 | ADAPTER-TORQUE | 9 | |
460007230 | ADAPTER-TORQUE A320 | 27 | |
46E08 | MLG ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDIN | 4 | |
6MIT65B01502 | Torque adapter-B.L.G. retract actuator | 2 | |
6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
730N/65 | TORQUE WRENCH WITH ADAPTER (0-600 RANGE) | 1 | |
734-92713 | TORQUE ADAPTER (EQUIVALENT TO 771-16957) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92715 | TORQUE ADAPTER (EQUIVALENT TO 771-16959) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92717 | TORQUE ADAPTER (EQUIVALENT TO 771-16961) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92718 | TORQUE ADAPTER (EQUIVALENT TO 771-16963) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77144-T | ADAPTER-TORQUE, AUTO BRAKE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77144-T6 | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77144-T6PM | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 19 | |
834730-1 | ADAPTER - TORQUE, STARTER CLUTCH | 1 | |
85255A11 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 42 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
85255A13 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 156 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BE | 2 | |
856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
856A1000 G06 | Torque Adapter, I/R - No. 3 Brg Locking Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G06 | TORQUE ADAPTER, I/R - NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 4 | |
856A1000G09 | TORQUE ADAPTER, I/R - NO. 3 BRG LOCKIN | 6 | |
856A1006 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR NUTS (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 8 | |
856A1006 REV F | ADAPTER TORQUE-COMPR. STATOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1006G01 | Adapter torque-compressor stator nuts | 8 | |
856A1022P05 | CFM 56-3 TORQUE ADAPTER WRENCH | 7 | |
856A1022P06 | CFM 56-3 TORQUE ADAPTER WRENCH | 6 | |
856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1098G01 | ADAPTER, TORQUE WRENCH - HPT NOZZLE (ADAPTER) | 5 | |
856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 6 | |
856A1336 | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 3 | |
856A1336 REV C | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1336G02 | ADAPTER SET, TORQUE- MEC FASTENERS | 20 | |
856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT (DAC CONFIG 01 PRE SB 72-0209) | 1 | |
856A1827G01 | SET-ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
856A1865G01 | TORQUE ADAPTER,I/R-NO.3BRG 1 | 3 | |
856A2706G03 | BEAM TORQUE ADAPTER - FAN | 4 | |
856A3466 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3466G01 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | 5 | |
856AI006 | ADAPTER TORQUE-COMPR. STATOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8600429 | TORQUE ADAPTER - PART NO. 8600429 | 5 | |
8C2024 | ADAPTER, ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2043 | ADAPTER, TORQUE - NO. 4 S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2758 | ADAPTER, TORQUE - HPT AIR DUCT (LONG VERSION USED WITH RTR LOCK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8MIT65B01231-1 | TORQUE ADAPTER - INNER CYLINDER NUT, BODY LANDING GEAR | 1 | |
9429M25 | PLATE - TORQUE ADAPTER-INSTALL/REMOVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1056 | ADAPTER - TORQUE - NO. 4 SPANNER NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1090 | ADAPTER - ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3056 | ADAPTER - TORQUE - NO 4 SPANNER NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3250 | ADAPTER - TORQUE - HPT FLANGE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27804001000 | ADAPTER-TORQUE TEST | 3 | |
98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
98A27808003001 | Adapter fuer torque shaft drive tool-24 teeth | 14 | |
98A32103003000 | ADAPTER-TORQUE | 7 | |
98A57104004000 | ADAPTER-TORQUE WRENCH | 6 | |
98D27504035000 | Adapter - Torque, Trunnion Nut | 20 | |
98D57508791000 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D71203006234 | ADAPTER FOR LEFT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
98D71203006235 | ADAPTER FOR RIGHT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
98F49208240000 | ADAPTER - TORQUE (SQUARE | 8 | |
98F49208240001 | ADAPTER-TORQUE 3-8 | 11 | |
98F49208240200 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240202 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240208 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240210 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49209001000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | 5 | |
98L24209005000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S61005002000 | ADAPTER-TORQUE WRENCH | 5 | |
A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR NLG | 2 | |
A32070-1 | Torque Adapter -Snubber Nut | 1 | |
A32120-1 | TORQUE ADAPTER - ACTUATOR COMPONENTS, MAIN GEA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A342 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71011-331 | WRENCH-TORQUE ADAPTER HEAD | 7 | |
AB27001-VU2 | ADAPTER-TORQUE-TRUNNION NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-00602-001 | ADAPTER - TORQUE, WING/FUSELAGE BOLT | 3 | |
AGE-04443-401 | ADAPTERS SET-TEST, TORQUE MOTOR SERVO LINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE15011 | ADAPTER - ACM TORQUE CHECK | 5 | |
AP-BEE530-3 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
APV7873-01-0 | ADAPTER - TORQUE TOOL | 2 | |
AST-2877 | ADAPTER-TORQUE WRENCH | 7 | |
AT31799 | WHEEL-SENSOR TORQUE-WRENCH ADAPTER | 5 | |
AT31799-IAS | WHEEL-SENSOR TORQUE-WRENCH ADAPTER | 1 | |
AT69-35663-1001 | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
AT69-35663-1001PM | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
B19586-3 | ADAPTER -TORQUE WRENCH (RESERVOIR FITTING TO RESERVOIR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B20002-1 | Torque Adapter -Socket Type | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
B27033 | TORQUE ADAPTER -0 AILERON PCU INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27033-1 | TORQUE ADAPTER - AILERON POWER CONTROL UNIT INSTAL | 9 | |
B362-008407 | TORQUE - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B362-04180A | TORQUE - ADAPTER | 1 | |
B362-0911 | ULB BATTERY, TORQUE ADAPTER (TELEDYNE BENTHOS, ELP-362D BEACONS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B362-09111 | TORQUE - ADAPTER | 5 | |
BL51555 | WRENCH-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27017-1 | ADAPTER SET - TORQUE WRENCH, TRAILING EDGE FLAPS | 3 | |
C27020-1 | TORQUE WRENCH ADAPTER - L.E. SLAT C27020-1 | 3 | |
C27024-1 | ADAPTER - TORQUE WRENCH | 1 | |
C27060-1 | ADAPTER- TORQUE AND FORCE TEST CONTROL WHEEL | 21 | |
C27060-22 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST | 5 | |
C27064 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27064-1 | Torque Wrench Adapter -Manual Stabilizer Trim Wheel | 16 | |
C32013 | TORQUE WRENCH ADAPTER-AFT BRG RTNR NUT,MLG TRUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32013-1 | TORQUE WRENCH ADAPTER - AFT BEARING | 16 | |
C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 6 | |
C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 1 | |
C52007-1 | ADAPTER - TORQUE WRENCH, AUTOMATIC OVERWING EXIT HATCH | 10 | |
C52007-8 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC | 2 | |
C52008-1 | ADAPTER- TORQUE WRENCH, GALLEY AND ENTRY DOOR | 19 | |
C79560 | Q-Spring torque adapter | 1 | |
CAT5643-12C | ADAPTER, TOOL-TORQUE WRENCH | 2 | |
CAT5643-13C | ADAPTER, TOOL-TORQUE WRENCH | 3 | |
CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
CJMDL27-005 | ADAPTER -- TORQUE WRENCH | 1 | |
DAH600865 | ADAPTER - TORQUE WRENCH, RAT | 3 | |
DAPT61-0014-00 | ADAPTER-TORQUE | 1 | |
DAPT61-0015-00 | ADAPTER-TO TORQUE PROP FASTENERS | 8 | |
DAPT61-0015-00-IAS | ADAPTER-TORQUE PROP FASTENERS | 1 | |
DAPT61-0015-00IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
DAPT61−0015−00-IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
DRT63394-23 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DRT68238 | ADAPTER-TORQUE | 6 | |
DZZ7062-1 | Adapter set-MLG trunnion bolt torque | 1 | |
DZZ7062-501 | Adapter set-MLG trunnion bolt torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7075-1 | TORQUE ADAPTER - MLG TRUCK PIV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7154-1 | Adapter-MLG axle nut torque | 7 | |
DZZ7225 | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7225 REV A | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ED1394-1 | ADAPTER - TORQUE, MANUAL LOCK RELEASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ETOR.101 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 2 | |
ETOR.102 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70291 | ADAPTER SET -0 TORQUE WRENCH USED TO TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70291-1 | ADAPTER-TORQUE WRENCH | 2 | |
F70291-3 | ADAPTER SET-TORQUE WRENCH | 1 | |
F70291-4 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-5 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-6 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-7 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70300-1 | ADAPTER - DRIVE, FLAP TORQUE TUBE SPLIN | 23 | |
F70306 | TORQUE ADAPTER -0 SKID DETECTOR NUT, MLG TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70312-18 | ADAPTER - TORQUE WRENCH | 2 | |
F70312-20 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
F70312-23 | TORQUE WRENCH ADAPTER CROW-FOOT SPL-5284 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70312-25 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000(NOM'L)A/C FLATS | 2 | |
F70312-4 | TORQUE WRENCH ADAPTER CROW-FOOT | 7 | |
F70326-1 | Adapter - Torque Wrench, Manual Stab Trim Wheel | 15 | |
F72867-1 | ADAPTER ASSEMBLY, CONTROL WHEEL - TORQUE AND FORCE TEST | 23 | |
F72900 | TORQUE ADAPTER- AILERON CONTROL CAPTAINS TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72900-1 | Torque adapter-aileron control column,captains | 5 | |
F72914 | TORQUE ADAPTER ASSY -0 RUDDER CONTROL POWER UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72914-1 | Torque adapter assy-rudder control power unit instl | 3 | |
F72915 | TORQUE WRENCH ADAPTER ASSY -0 CLAMSHELL JAM NUT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72915-1 | TORQUE WRENCH ADAPTER ASSY-CLAMSHELL JAM NUT | 2 | |
F72922 | TORQUE ADAPTER -0 MLG FWD TRUNNION BOLT USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72922-1 | Torque adapter-MLG fwd trunnion bolt | 1 | |
F72922-4 | Torque adapter-MLG fwd trunnion bolt | 6 | |
F72930 | TORQUE ADAPTER -0 MLG SIDE STRUT TO TORQUE FWD. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72930-1 | Torque adapter-main landing gear side strut | 1 | |
F72955 | ADAPTER -0 TORQUE WRENCH, LG TRUNNION NUT TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72986 | ADAPTER-TORQUE WRENCH, MLG UP-LOCK, TEST WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72986-1 | ADAPTER TORQUE UP-LO | 4 | |
F80-0-1552-14 | Adapter-Torque Wrench | 1 | |
F80-0-2705 | ADAPTER TORQUE WRENCH (NSN 5120-01-320-1495) KC135 | 3 | |
F80-4-67 | Adapter-Torque Wrench | 1 | |
F80-4-67PM | ADAPTER-TORQUE WRENCH | 1 | |
F80122-11 | Adapter eqpt-torque wrench,flap drive transmission | 2 | |
F80122-12 | ADAPTER EQPT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 3 | |
F80122-13 | ADAPTER EQPT-TORQUE WRENCHN+ÃFLAP DRIVE TRANSMISSI | 2 | |
F80122-14 | ADAPTER EQPT-TORQUE WRENCH | 11 | |
F80122-15 | ADAPTER EQPT-TORQUE WRENCH | 10 | |
F80122-16 | ADAPTER EQUIPMENT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 9 | |
F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80171-1 | Adapter - Torque, Galley and Entry Door | 8 | |
F80176 | ADAPTER, TORQUE WRENCH- MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80176-1 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT | 5 | |
F80176-8 | TORQUE WRENCH ADAPTER - MLG TRUNNION, AFT BEARING | 13 | |
F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 13 | |
F80259-1 | ADAPTER - TORQUE WRENCH | 2 | |
F80259-1 -2 -3 -4 | Adapter -Torque Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80259-2 | ADAPTER - TORQUE WRENCH F80259-2 | 2 | |
F80259-3 | ADAPTER-TORQUE WRENC | 3 | |
F80259-3PM | ADAPTER-TORQUE WRENCH 1,000 | 1 | |
F80259-4 | Adapter-Torque Wrench | 2 | |
FE171901 | ADAPTER-TORQUE | 8 | |
FRDH 141 | ADAPTER-TORQUE | 12 | |
FRDH101 | TORQUE DRIVE ADAPTER R 3/8 - 5/16 | 3 | |
FRDH14 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FRDH141 | ADAPTER-TORQUE | 12 | |
FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
FRDH181 | TORQUE ADAPTER, 3/8" DRIVE, 12-POINT, 9/16" | 3 | |
FRES10 | 3/8"DRIVE-5/16" TORQUE ADAPTER 2 EA | 4 | |
FRES12 | 3/8"DRIVE-3/8" TORQUE ADAPTER 2 EA | 6 | |
FRES14 | 3/8"DRIVE-7/16" TORQUE ADAPTER 2 EA | 6 | |
G27011 | SPLINE ADAPTER -0 TORQUE SENSOR, INBD & OUTBD TE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27030 | TORQUE ADAPTER -0 HORIZONTAL STABILIZER ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27030-1 | TORQUE ADAPTER - HORIZONTAL STABILIZER ACTUATOR | 8 | |
G27082-1 | Torque Adapter - Flap Track Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27082-12 | TORQUE ADAPTER - FLAP TRACK INSTALLATION | 1 | |
G27094-1 | SPLINE ADAPTERS - SUPPORT ASSEMBLY, TORQUE TUBE | 1 | |
G27094-4 | SPLINE ADAPTER - SUPPORT ASSY, TORQUE TUBE | 1 | |
G32037 | TORQUE ADAPTER -0 RETRACT ACTUATOR, WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G32060-1 | ADAPTER - ROD END TORQUE | 2 | |
G600-270052-1 | Adapter - Torque Check | 5 | |
G600-520001-1 | ADAPTER - CABIN DOOR TORQUE | 1 | |
G600-524101-1 | Torque Wrench Adapter - Equipment Bay Door Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G600−520001–1 | ADAPTER - BAGGAGE DOOR HANDLE TORQUE WRENCH | 1 | |
G601R521104-1 | ADAPTER - BAGGAGE DOOR HANDLE TORQUE WRENCH | 7 | |
G601R521104−1 | ADAPTER - CABIN DOOR TORQUE | 7 | |
G601R522201-1 | TORQUE ADAPTER - PILOT HATCH HANDLE INSIDE | 4 | |
G601R522202-1 | Torque Adapter - Pilot?S Hatch Handle (Outside) | 6 | |
G700-521108-1 | KIT - CABIN DOOR TORQUE ADAPTER | 2 | |
GP000973 | ADAPTER-TORQUE WRENCH VALVE TO CYLINDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS10767 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS10767-1 | ADAPTER - TORQUE WRENCH | 1 | |
GS15194-1 | ADAPTER - TORQUE WRENCH | 1 | |
GS15995-1 | Adapter - Torque Wrench | 2 | |
GS20782-1 | TORQUE ADAPTER HUB 130-140 FT LBS | 10 | |
GS20931-1 | Two-Way Solenoid Torque Adapter | 2 | |
GS20932-1 | Three-Way Solenoid Torque Adapter | 2 | |
GS26802-1 | TORQUE ADAPTER - BALANCE NUT | 2 | |
GSE 52X-11-08 | KIT - CABIN DOOR TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE148 | ADAPTER - TORQUE, WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE234 | SPLINE ADAPTER - TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSRS15-16 | ADAPTER - TORQUE WRENCH RUDDER PCU INSTA | 4 | |
HC130H0014-000 | ADAPTER-TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HC130H0029-000 | ADAPTER-TORQUE(MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS9000 | ADAPTER - TORQUE WRENCH | 2 | |
HS9585 | ADAPTER-TORQUE WRENCH | 1 | |
IAE1F10039 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20012 | ADAPTER-TORQUE TOOL | 12 | |
IAE1N20023 | ADAPTER-TORQUE TOOL | 15 | |
IAE1N20023 (ALT : RSE1234) | ADAPTER-TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20023_AAR | ADAPTER-TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20036 | TORQUE ADAPTER; MD-90 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20054 | TORQUE ADAPTER;MD-90 | 4 | |
IAE1P16486 | Adapter,anti-torque pma drive gear retaining nut | 3 | |
IAE2R19427 | ADAPTER-TORQUE TOOL | 3 | |
J27003-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, LEADING EDGE SLAT | 9 | |
J27003-2 | DRIVE ADAPTER -TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27021-1 | Adapter - Drive, T.E. Flap Torque Tube Coupling | 10 | |
J27022 | ADAPTER-TORQUE,SLAT PINION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27022-1 | ADAPTER - TORQUE, SLAT PINION | 8 | |
J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
J32055-50 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 8 | |
J32055-61 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J47549 | NLG ADAPTER-TORQUE | 40 | |
K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27012-1 | Drive Adapter - Torque Tube Coupling, LE Slat and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27069-1 | ADAPTER-TORQUE WRENCH, NO BACK BRAKE | 6 | |
K32034-1 | Torque Adapter -Electrical Brake Actuator Connector. Main Landing Gear | 8 | |
ME65B40000-1 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 7 | |
ME65B83635 | TORQUE WRENCH ADAPTER-BRAKES,SIDE CARGO DOOR | 12 | |
MIT65B01218 | ADAPTER - TORQUE, WING LANDING GEAR DRAG BRACE ASSEMBLY | 5 | |
MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 1 | |
MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BLG | 3 | |
MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
MIT65B04308-1 | TORQUE ADAPTER SET - CARGO DOOR MECHANISM | 1 | |
MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B08802-1 | TORQUE WRENCH ADAPTER - BUNGEE DOWNLOCK, JURY STRUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B15171 | ADAPTER - TORQUE, VARIABLE CAMBER FLAP HINGE NUT | 2 | |
MIT65B80326-6 | ADAPTER - PROTRACTOR, CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 2 | |
MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM & CTR. MECH. LAT. CONTROL | 2 | |
MIT65B80549 | Adapter -Torque Wrench. Outboard Elevator Power Control Unit (Pcu) | 6 | |
MIT65B80550 | Adapter-torque wrench,inbd elev,PCU | 6 | |
MIT65B80859 | TORQUE WRENCH ADAPTER - SEQUENCE MECHANISM ASSEMBLY SPEED BRAKE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B81213 | TORQUE WRENCH ADAPTER - FWD RUDDER QUADRANT | 1 | |
MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
MT0011 | Torque Adapter - Firewall, Connector | 11 | |
PWA 83101 | ADAPTER - TORQUE, GEARBOX OIL LUBE AND SCAVENGE COVER | 3 | |
PWA 85791 | ADAPTER, COUNTER-TORQUE | 1 | |
PWA102285 | ADAPTER - TORQUE, IDG AIR/OIL COOLER SUPPORT BRACKET | 1 | |
PWA105136 | ADAPTER - TORQUE, RADIAL DRIVE UNIT - PW2000 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106305 | ADAPTER,TORQUE-EEC ALTERNATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107602 | ADAPTER, TORQUE - ENGINE, AFT DRAIN MAST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA111484 | ADAPTER ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA211413 | ANTI-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA211435 | ADAPTER, TORQUE - PMA ROTOR | 2 | |
PWA212369 | TORQUE ADAPTER (LP35)- ANGLE GEARBOX | 2 | |
PWA25612 | ADAPTER,TORQUE WRENCH - LPC FLANGE_[PWA25612] | 1 | |
PWA28940 | ADAPTER,TORQUE - 3.0 BLEED CONTROL_20.3 X 20.3 X 157.5MM / 0.18KG [PWA28940] | 5 | |
PWA85436 | ADAPTER - TORQUE, BLEED VALVE (2.9) HPC | 1 | |
PWA85749 | ADAPTER-TORQUE ELECTRONIC HARNESS CONNECTOR | 2 | |
PWA85853 | ADAPTER - TORQUE, IDG AIR/OIL HEAT EXCHANGER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85862 | ADAPTER, TORQUE - ENGINE ASSY, FUEL PUMP, RETAINING BOLTS | 6 | |
PWA85928 | ADAPTER - TORQUE, 2.5 BLEED VALVE ACTUATOR | 1 | |
PWA86461 | Adapter, Torque - Engine Assy, Fuel Pump, Retaining Bolt | 7 | |
PWA87198 | ADAPTER,TORQUE-AIR/OIL COOLER, MOUNT BOLTS | 3 | |
PWA88018 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40781 | ADAPTER DYNO-TORQUE | 4 | |
PWC48118 | TORQUE ADAPTER-NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Q46100 | ADAPTER - NLG TORQUE LINK CENTER PIN NUT - R/I | 10 | |
R46014 | NLG ADAPTER-TORQUE | 27 | |
RBD29826 | 4 Blade Tail Rotor Nut #369D21716-5 Torque Wrench Adapter | 2 | |
RSE1134 | ADAPTER - TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSE1234 | ADAPTER-TORQUE TOOL | 17 | |
SE227-2011 | Torque Adapter - Rudder Trim Knob | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE27-2011 | TORQUE ADAPTER-RUDDER TRIM KNOB | 7 | |
SJN471 | TORQUE ADAPTER 1-1/16’’ | 2 | |
SLT0075 | ADAPTER - TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10357 | TORQUE WRENCH ADAPTER STOP NUT - WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1748 | ADAPTER - TORQUE WRENCH, MANUAL, STABILIZER TRIM WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-20727 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-2358 | SET ADAPTER - TORQUE HMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-27 | Adapter - Torque, Hydralic Reservoir Barrel Guide | 1 | |
SPL-3739 | Adapter -Torque | 1 | |
SPL-3740 | Adapter-Torque | 1 | |
SPL-5378 | Adapter-Torque Wrench | 1 | |
SPL-5438 | Adapter-Torque Wrench | 1 | |
SPL-5441 | Adapter-Torque Wrench | 1 | |
SPL2358 | SET ADAPTER - TORQUE HMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
SRES30 | ADAPTER - TORQUE, RR TRENT ENGINE THRUST REVERSER | 3 | |
SRES30А | ADAPTER - TORQUE, RR TRENT ENGINE THRUST REVERSER | 3 | |
ST2575A | STANDARD TOOL - TORQUE ADAPTER | 2 | |
ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 4 | |
ST2580-245 | Torque Wrench Adapter -Crowfoot | 4 | |
ST2580-251 | TORQUE WRENCH ADAPTER -0 375 SLOT-5 O.DIA | 9 | |
ST2580-263 | ADAPTER - TORQUE, WING LANDING GEAR RETRACT ACTUATOR SPACER NUT SPL-5286 | 8 | |
ST2580-337 | TORQUE WRENCH ADAPTER - FOR 15/16-INCH HEX NUT | 2 | |
ST2580-550A | TORQUE ADAPTER, RATCHETING 737-8 | 1 | |
ST95063 | TORQUE ADAPTER-FUEL CONTROL, DELTA P - APU500 - PR | 2 | |
STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
STD67681 | Adapter-Torque | 1 | |
SWE4803 | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWE4803A | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
T-438834 | ADAPTER-TORQUE | 1 | |
T-445708 | ADAPTER-TORQUE | 2 | |
T-451318 | ADAPTER-TORQUE | 1 | |
T-451318PM | ADAPTER-TORQUE | 1 | |
T-71023 | Torque Adapter - Barrel gland nut | 1 | |
T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
T-71038 | Torque Adapter - Barrel gland nut | 1 | |
T131946 | Q-Spring torque adapter | 1 | |
T7055 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65-20804 | Torque Wrench Adapter - Stabillizer Trim Hand Wheel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TMRX8 | TORQUE ADAPTER ESTRIADO 1/4 X 1/4 - ABERTO | 2 | |
TO3836 | ADAPTER -TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TS1176/D917 | WING BOLT TOOLS - NUT TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WCS32965 | WRENCH-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.