Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
97A28002542000 | ADAPTER ADAPTER - D | 5 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
173785 | CHARGING ADAPTER - OXYGEN SYSTEM | 9 | |
A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
98F07108635000 | ADAPTER-AFT,JACKING | 13 | |
F80212-30 | Adapter - Rudder Pedal Force Check | 18 | |
(CALIB) 101-00907 | Adapter-Fuel Return Valve (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 200909-CA | ADAPTER-MLG JACK same as P/N TMHMA02-00-00 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 200951A | ADAPTER-NLG JACK | 1 | |
(CALIB) 31171-000-002 | SG239 Light Maintenance Crane - Adapter Front LCV (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 60-3200-0010 | ADAPTERS - FUNCTIONAL TEST BOX ( 2 CABLES ) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 60159-101 | ADAPTER-CABLE AY, ELECTRIC (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 856A2659G01 | FILTER ADAPTER - DRY OUT (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98A28007570000 | ADAPTER ADAPTER - VENT AND DRAIN VALVE, (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98AMS172327002 | WRENCH WRENCH-ADAPTER (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98D28108293000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 1 | |
(CALIB) 98D34103002000 | ADAPTERS - AIR DATA SYSTEM FLUSHING (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98D34103002102 | AIR DATA SYSTEM FLUSHING 2-PIN ADAPTER (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98F27508278002 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98F34103000000 | ADAPTER ADAPTER-COVER STATIC PROBE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98L27209010000 | ADAPTER ADAPTER-TURN BARREL, LOWER RUDD (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98L27209015000 | ADAPTER ADAPTER-TURN BARREL,UPPER RUDDE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 98V07109001000 | ADAPTER - AFT JACKING (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) 99L44508762000 | ADAPTER-CVMS, ACCESS (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) C49008-37 | Adapter EQPT - APU Jacking (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) CG9520003-0001 | ADAPTER, HANDLE LOAD - ESCAPE HATCH (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) J23002-16 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE (CALIBRATION) | 1 | |
(CALIB) J24001-43 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) J24001-50 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K21010-45 | ADAPTER - JACK, RAM AIR FAN (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K21011-59 | ADAPTER - JACK, ADJUST ANGLE (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K24001-1 | HOIST ADAPTER ASSY - VFSG & ASG (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) K29001-1 | Adapter Eqpt - EMP R/I (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) M28TC0015000 | TEST ADAPTER - DISPENSE PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
(CALIB) PWA111085 | Adapter, Vacuum Check - Engine Assy. (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
00460-015-000 | ADAPTER - TRIPOD JACK | 1 | |
00460-042-000 | NOSE JACKING ADAPTER - 747 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
008407 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
00GSE-1041-00 | ADAPTER - OXYGEN REMOTE FILL PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
01-0169-01 | ADAPTER MST-903 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0107-6-6 | MALE PIPE ADAPTER 3/8-18NPTF MALE 3/8-18NPSM FEMALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-1/4 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-1/4C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-1/8 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-1/8C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-17/64 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-3/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-3/16C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-3/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-3/32C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-3/8C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-5/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-5/16C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-5/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-5/32C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-7/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-7/32C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2621-9/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-10 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-10C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-11 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-11C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-16 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-16C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-20 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-20C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-21 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2622-21C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-27 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-27C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-3 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-30 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-30C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-3C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-40 | Threaded Shank Adapter Drills 10-32 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2622-40C | Threaded Shank Adapter Drills 10-32 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2921-1/4 | THREADED SHANK ADAPTER DRILLS 1/4 -28 H.S.S. STUB | 1 | |
02-2921-1/4C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | 1 | |
02-2921-1/8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 1 | |
02-2921-1/8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 1 | |
02-2921-17/64 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2921-17/64C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2921-3/16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 2 | |
02-2921-3/16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 1 | |
02-2921-3/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
02-2921-3/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | 1 | |
02-2921-3/8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | 1 | |
02-2921-3/8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | 1 | |
02-2921-5/16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2921-5/16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2921-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2921-5/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | 1 | |
02-2921-7/32 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2921-7/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2921-9/32 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2921-9/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-10 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | 1 | |
02-2922-10C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | 1 | |
02-2922-11 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-11C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-20 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | 1 | |
02-2922-20C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | 1 | |
02-2922-21 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-21C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-27 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-27C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-3 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-30 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | 1 | |
02-2922-30C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | 1 | |
02-2922-3C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2922-40 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2922-40C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2923-D | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-DC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-F | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-FC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-G | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-GC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-J | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2923-JC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-2.3 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-2.3C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2924-3.17C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2924-3.96 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-3.96C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-4.76 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 4.76 Mm )( Decimal Equivalent: .1874" ) | 1 | |
02-2924-4.76C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2924-6.35 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 6.35 Mm )( Decimal Equivalent: .2500" ) | 1 | |
02-2924-6.35C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2924-8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Stubby 3/4" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2924-8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Stubby 3/4" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-1/4 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-1/4C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-1/8 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-1/8C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-17/64 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-3/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-3/16C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-3/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-3/32C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-5/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-5/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-5/32C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-7/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-7/32C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2941-9/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-10 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-10C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-11 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-11C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-16 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-16C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-20 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-20C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-21 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2942-21C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-27 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-27C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: ..1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-3 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-30 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-30C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-3C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-40 | Threaded Shank Adapter Drills 10-32 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2942-40C | Threaded Shank Adapter Drills 10-32 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-1/4 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-1/4C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-1/8 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-1/8C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-3/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-3/16C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-3/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-3/32C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-3/8 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-5/16 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-5/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-5/32C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 5/32" )( Decimal Equivalent: .1562" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-7/32 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2951-7/32C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-10 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-10C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-11 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-11C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-16 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-16C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-20 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-20C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-21 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2952-21C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-27 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-27C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-3 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-30 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-30C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-3C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-40 | Threaded Shank Adapter Drills 10-32 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2952-40C | Threaded Shank Adapter Drills 10-32 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2961-1/4 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | 1 | |
02-2961-1/4C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | 1 | |
02-2961-1/8 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 2 | |
02-2961-1/8C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 1 | |
02-2961-17/64 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2961-17/64C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2961-3/16 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 2 | |
02-2961-3/16C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 1 | |
02-2961-3/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
02-2961-3/32C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | 1 | |
02-2961-3/8 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | 2 | |
02-2961-3/8C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | 1 | |
02-2961-5/16 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2961-5/16C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2961-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
02-2961-5/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2961-7/32 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2961-7/32C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2961-9/32 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2961-9/32C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-10 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
02-2962-10C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | 1 | |
02-2962-11 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT 1-1/4" O.A.L ( DRILL SIZES: 11 )( DECIMAL EQUIVALENT: .1910" ) | 1 | |
02-2962-11C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-16 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 16 )( Decimal Equivalent: .1770" ) | 1 | |
02-2962-16C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-20 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
02-2962-20C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | 1 | |
02-2962-21 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT | 1 | |
02-2962-21C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2962-27 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-27C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-3 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-30 | THREADED SHANK ADAPTER DRILLS 1/4-28 H.S.S. SHORT 1-1/4" O.A.L ( DRILL SIZES: 30 )( DECIMAL EQUIVALENT: .1285" ) | 1 | |
02-2962-30C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | 1 | |
02-2962-3C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2962-40 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2962-40C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2963-D | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-DC | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-F | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-FC | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-G | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-GC | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-J | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2963-JC | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-2.3 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-2.3C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2964-3.17C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2964-3.96 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-3.96C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-4.76 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 4.76 Mm )( Decimal Equivalent: .1874" ) | 1 | |
02-2964-4.76C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2964-6.35 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2964-6.35C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 6.35 Mm )( Decimal Equivalent: .2500" ) | 1 | |
02-2964-8 | Threaded Shank Adapter Drills 1/4-28 H.S.S. Short 1-1/4" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2964-8C | Threaded Shank Adapter Drills 1/4-28 Cobalt Short 1-1/4" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2971-1/4 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | 1 | |
02-2971-1/4C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 1/4" )( Decimal Equivalent: .2500" ) | 1 | |
02-2971-1/8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 2 | |
02-2971-1/8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 1/8" )( Decimal Equivalent: .1250" ) | 1 | |
02-2971-17/64 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2971-17/64C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 17/64" )( Decimal Equivalent: .2656" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2971-3/16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 2 | |
02-2971-3/16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3/16" )( Decimal Equivalent: .1875" ) | 1 | |
02-2971-3/32 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/32" )( Decimal Equivalent: .0938" ) | 2 | |
02-2971-3/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2971-3/8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2971-3/8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3/8" )( Decimal Equivalent: .3750" ) | 1 | |
02-2971-5/16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2971-5/16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 5/16" )( Decimal Equivalent: .3125" ) | 1 | |
02-2971-5/32 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 2 | |
02-2971-5/32C | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2971-7/32 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2971-7/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 7/32" )( Decimal Equivalent: .2188" ) | 1 | |
02-2971-9/32 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2971-9/32C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 9/32" )( Decimal Equivalent: .2812" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-10 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | 1 | |
02-2972-10C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #10 )( Decimal Equivalent: .1935" ) | 1 | |
02-2972-11 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | 1 | |
02-2972-11C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #11 )( Decimal Equivalent: .1910" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-16 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | 1 | |
02-2972-16C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #16 )( Decimal Equivalent: .1770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-20 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | 1 | |
02-2972-20C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #20 )( Decimal Equivalent: .1610" ) | 1 | |
02-2972-21 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2972-21C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #21 )( Decimal Equivalent: .1590" ) | 1 | |
02-2972-27 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-27C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #27 )( Decimal Equivalent: .1440" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-3 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-30 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | 1 | |
02-2972-30C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #30 )( Decimal Equivalent: .1285" ) | 1 | |
02-2972-3C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #3 )( Decimal Equivalent: .2130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2972-40 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2972-40C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: #40 )( Decimal Equivalent: .0980" ) | 1 | |
02-2973-D | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-DC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: D )( Decimal Equivalent: .2460" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-F | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-FC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: F )( Decimal Equivalent: .2570" ) | 1 | |
02-2973-G | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-GC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: G )( Decimal Equivalent: .2610" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-J | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2973-JC | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: J )( Decimal Equivalent: .2770" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-2.3 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-2.3C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 2.3 Mm )( Decimal Equivalent: .0906" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-3.17 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2974-3.17C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3.17 Mm )( Decimal Equivalent: .1248" ) | 1 | |
02-2974-3.96 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-3.96C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 3.96 Mm )( Decimal Equivalent: .1569" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-4.76 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2974-4.76C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 4.76 Mm )( Decimal Equivalent: .1874" ) | 1 | |
02-2974-6.35 | ADAPTER DRILLS, 1/4”-28 SHANK THREAD | 1 | |
02-2974-6.35C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 6.35 Mm )( Decimal Equivalent: .2500" ) | 1 | |
02-2974-8 | Threaded Shank Adapter Drills 1/4"-28 H.S.S. Long 2-1/8" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-2974-8C | Threaded Shank Adapter Drills 1/4"-28 Cobalt Long 2-1/8" O.A.L ( Drill Sizes: 8 Mm )( Decimal Equivalent: .3150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
02-7833C0110 | Tronair 02-7833C0110 Blue 12-Ton Hydraulic Axle Jack with MainNose Gear Adapters (CE) | 3 | |
02C50A07-1-75 | TOOL-BAYONET ADAPTER | 2 | |
05-001 | AERO SPECIALTIES 05-001 NITROGEN INFLATING VALVE ADAPTER - 3000 PSI | 1 | |
05-001 | INFLATING VALVE ADAPTER, NITROGEN -3000PSI | 1 | |
06-5004-0500-A2 | CART, HYDRAULIC SERVICING -KHC1858 KIT ADAPTERS | 3 | |
07-110-9200 | ADAPTER - FOR 3214-30 / 3214-31 | 1 | |
07-110-9650 | ADAPTER - FOR 3117-01 BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-401B | Shank Adapters ( Shank Size: .401" Shank )( Accepts: .401" Shank Sets )( Overall Length (without Spring): 3-3/4"{ (95 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-450 | Gooseneck Insert Adapters ( Shank Size: .401" )( Insert Size: .406" )( Overall Length: 4-1/2" (114 Mm) ) | 1 | |
07-451 | Gooseneck Insert Adapters ( Shank Size: .401" )( Insert Size: .531" )( Overall Length: 4-1/2" (114 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-455 | Gooseneck Insert Adapters ( Shank Size: .498" )( Insert Size: .406" )( Overall Length: 4-1/2" (114 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-456 | Gooseneck Insert Adapters ( Shank Size: .498" )( Insert Size: .531" )( Overall Length: 4-1/2" (114 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-498A | Shank Adapters ( Shank Size: .498" Shank )( Accepts: .498" Shank Sets )( Overall Length (without Spring): 3-3/4"{ (95 Mm) ) | 1 | |
07-70407 | Shank Adapter ( For Use With: .401 Shank Sets )( Overall Length: 4-1/2" (114 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
07-82190 | Rivet Set Adapters ( A' Dimension: 3/8" )( B' Dimension: 1-1/4" )( C' Dimension: 1/2" )( D' Dimension: 3/4" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0884EE | ADAPTER - PROBE, PITOT STATIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
098736 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
1-16679A | ADAPTER M/F 1/2-1/74 -5879 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10 XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH | 5 | |
10-008 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
10-010 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 4 | |
10-016 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-021 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
10-023 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-028 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-030 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
10-031 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-036 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-040 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
10-046 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-208 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-210 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 4 | |
10-216 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-221 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-223 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-228 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
10-230 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 2 | |
10-231 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-236 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-240 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
10-246 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-308 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-310 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-316 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-321 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-328 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-330 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-331 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 3 | |
10-336 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-340 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | 1 | |
10-346 | THREADED SHANK ADAPTER DRILLS COBALT - NAS965D(HAUSMANN.AERO) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10-400-0192 | ADAPTER CASE BOLT ADAPTER (SET OF 8) - 3X699 | 1 | |
1007336 | DMP-F-SONDEN-ADAPTER | 1 | |
10055988 | ADAPTER-EXTENSION,SOCKET WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00184-665 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
101-00301 | Fuel Quantity Adapter Module for Lockheed L-188 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00302 | Fuel Quantity Adapter Module for Fairchild F-27F, F-27J | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00303 | Fuel Quantity Adapter Module for Bell AH-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00306 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 3 | |
101-00307 | Fuel Quantity Adapter Module for Dehavilland DHC-6 | 3 | |
101-00313 | Fuel Quantity Adapter Module for Fairchild F-27, F-27J | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00315 | Fuel Quantity Adapter Module for Bell 204B, 205A, UH-1F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00320 | FUEL QUANTITY ADAPTER MODULE FOR SHORTS SD3-30, SD3 -60 | 1 | |
101-00322 | Fuel Quantity Adapter Module for Convair CV-580 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00323 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00324 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00329 | Fuel Quantity Adapter 101-00329 for Bell 206L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00336 | Fuel Quantity Adapter Module for Sikorsky S-58T | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00405 | BARFIELD FUEL QUANTITY ADAPTER MODULE FOR CESSNA 210, 337 PN: 101-00405 | 1 | |
101-00425 | Fuel Quantity Adapter Module for Bell 205A-1 / UH1 | 4 | |
101-00436A | Fuel Quantity Adapter Module for BAC-111 400 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00436B | Fuel Quantity Adapter Module for BAC-111 400 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00440 | Fuel Quantity Adapter Module for Douglas DC-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00442 | Fuel Quantity Adapter Module for Douglas DC-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00446 | Fuel Quantity Adapter Module for Beech C-90, E-90, A-100 | 2 | |
101-00465 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00465/466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00466 | Fuel Quantity Adapter Module for Dehavilland DHC-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00477B | Fuel Quantity Adapter Module for Mitsubishi MU-300 (Fuselage Tank) | 1 | |
101-00480 | Fuel Quantity Adapter Module for Fokker F-28 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00486 | Fuel Quantity Adapter Module for Lockheed C-130 H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00487 | Fuel Quantity Adapter Module for Mitsubishi MU-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00493 | Fuel Quantity Adapter Module for Fokker F-28, 4000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00547 | Fuel Quantity Indicator Adapter Cable for Boeing 101-00542 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00562 | ADAPTER CABLE - FUEL QUANTITY INDICATING SYSTEM (FQIS) TESTER (USED ON AIRPLANES WITHOUT DENSITOMETERS) | 4 | |
101-00563 | Fuel Quantity Adapter Module for Boeing 727, Boeing 737 -Dig Tank | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00802 | BARFIELD 101-00802 FUEL QUANTITY ADAPTER CABLE, F | 8 | |
101-00807 | BARFIELD 101-00807 FUEL QUANTITY ADAPTER MODULE, F | 3 | |
101-00808 | Fuel Quantity Adapter Module for DHC-8 | 6 | |
101-00808 (MOD A) | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
101-00808 (Mod A) | Fuel Quantity Adapter Module for DHC-8 | 1 | |
101-00808MODA | FUEL QUANTITY ADAPTER MODULE FOR DHC-8 | 1 | |
101-00814 | Barfield 101-00814 Fuel Quantity Probe Adapter Cable, For Aircraft | 8 | |
101-00817 | 15-PIN ADAPTERCABLE ASSEMBLY | 6 | |
101-00822 | Fuel Quantity Adapter Module for Embraer EMB-120 | 1 | |
101-00831 | BARFIELD 101-00831 FUEL QUANTITY ADAPTER CABLE, FOR FIXED WING AIRCRAFT | 5 | |
101-00855 | Fuel Quantity Adapter Cable for BAE 125-800 | 2 | |
101-00857 | Fuel Quantity Adapter Module for BAE 125-800 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-00874 | BARFIELD 101-00874 FUEL QUANTITY ADAPTER MODULE, FOR DE HAVILLAND AIRCRAFT | 8 | |
101-00876 | BARFIELD 101-00876 FUEL QUANTITY ADAPTER CABLE, FOR DE HAVILLAND AIRCRAFT | 7 | |
101-00878 | BARFIELD 101-00878 ADAPTER, FOR MALIBU MERIDIAN, P | 2 | |
101-00907 | Barfield 101-00907 Fuel Return Valve Adapter Cable, For Aircraft | 9 | |
101-00907=5A | ADAPTER - FUEL RETURN VALVE | 1 | |
101-01421 | Fuel Quantity Adapter Module for Sikkorsky Blackhawk S-70, UH-60 | 2 | |
101-01422 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
101-01423 | Fuel Quantity Adapter Module for Lockheed C-130 H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-01424 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
101-01425 | Fuel Quantity Adapter Module for Lockheed C-130 H | 1 | |
101-01426 | Fuel Quantity Adapter Module for Lockheed C-130 H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-01445 | Fuel Quantity Adapter Module for MC Donnell Douglas AH-64A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-01456 | Fuel Quantity Adapter Module for American Eurocopters MBB-BK117 | 1 | |
101-01463 | Barfield 101-01463 Fuel Quantity Adapter Module, For Learjet Aircraft | 4 | |
101-01467 | CABLE: ADAPTER,PROBE,#2-6, FOR THE ATR42/72 | 4 | |
101-01520 | Fuel Quantity Adapter Module for Boeing 747-100, 747-200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
101-380091-2/939 | CALIBRATION ADAPTER TEST BOX (MEGGIT) MM 200 ATA 77-00-00 | 2 | |
1013.5 | TRIPOD JACKS - ADAPTER (CAP) REAR FUSELAGE | 2 | |
1014.5 | NOSE FUSELAGE TRIPOD JACKS - ADAPTER (CAP) | 3 | |
10113 | TORQUE ADAPTER PROP BOLTS-5/8" HEAD ATA 61 | 15 | |
101009 | Adapter-Fuel Pump | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10160-1 | DOUBLE INT ADAPTER NON-POLORIZED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1062 | ADAPTER - SNAP ON CONNECTOR, SC | 3 | |
10390 | ADAPTER CABLE - HONEYWELL ZING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
103004 | 1/4"F - 3/8"M ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1016309 | KIT-ADAPTER GSP,SCS350 | 1 | |
1016310 | KIT-ADAPTER CU,SCS350 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
102-00902 | Turbine Temperature Adapter Cables for CF6-80A, A1, A2 engine | 3 | |
102-00903 | Turbine Temperature Adapter Module for CF6 and CF6-50 engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10390-1 | ADAPTER CABLE-CHADWICK | 1 | |
105K823G02 | ALLM LIFTING - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
109-3900-89-101 | JACKS & ADAPTERS, - MAIN AND NOSE LANDING GEAR | 1 | |
10C1002 | ADAPTER - HORIZONTAL - LIFT - FI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1002G01 | ADAPTER, HORIZONTAL - LIFT, FIXTURE (HORIZONTAL ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1016 | FIXTURE, ADAPTER - COMPR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1022G01 | ADAPTER SET ASSEMBLY PEDESTAL - COMPRESSOR REAR FRAME (ADAPTER SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1035G06 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1045G02 | ADAPTER, ANTI - TORQUE - FAN STATOR TO FAN DISK, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1137 | KIT, ADAPTER - HYDRAULIC PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1137G01 | KIT, ADAPTER - HYDRAULIC PUMP (HYDRAULIC PUMP ADAPTER KIT) | 2 | |
10C1138 | ADAPTER, MOTORING/LOCKING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1138G03 | ADAPTER - MOTORING/LOCKING CORE ENGINE | 1 | |
10C1153 | ADAPTER, PRESSURE CHECK-FUEL M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10C1268 | ADAPTER - TORQUE - BOOSTER TO F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10HXBU-SS | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 5 | |
11-105 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/8) | 1 | |
11-107 | COBALT THREADED SHANK ADAPTER DRILL 1/4" - 28 | 2 | |
11-109 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (3/16) | 3 | |
11-111 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (7/32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-113 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - SHORT (1/4) | 1 | |
11-20-0947 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-205 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/8) | 1 | |
11-207 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (5/32) | 1 | |
11-209 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (3/16) | 1 | |
11-21-9933 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-211 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (7/32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-213 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - LONG (1/4) | 1 | |
11-305 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/8) | 1 | |
11-307 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (5/32) | 2 | |
11-309 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (3/16) | 1 | |
11-31-1570 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-31-2176 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-31-3337 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-31-7559 | IDT - Manual - Adapter Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-313 | THREADED SHANK ADAPTER DRILL NAS 965 TYPE D - FRACTIONAL SIZES - STUBBY (1/4) | 2 | |
11-841487-101 | ADAPTER(REHEATER A330 PN 968A0000-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-851487-101 | ADAPTER(REHEATER A330 PN 968A0000-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-851487-108 | ADAPTER(REHEATER A330 PN 968A0000-03 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11-952 | 3/8" - 1/2" ADAPTER | 1 | |
110602003-00 | FADEC/EEC Adapter Cable for CFM56-5, -7 | 7 | |
110602005-01 | PDL INTERFACE CABLE-603 ADAPTER CABLE | 2 | |
110705-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
112-00007 | ADAPTER - CABLE, FQIS | 2 | |
112-52-0001 | TOOL - MISCELLANEOUS, TORQUE TOOL ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1134100-501 | ADAPTER - FLUSHING, EVAPORATOR | 1 | |
114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
114-1145 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL REIEF PLUGS | 2 | |
114-1618 | ADAPTER FOR A LEAK TEST OF PUSH-IN TYPE THERMAL RELIEF PLUGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
114071-60 | ADAPTER-UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
115-00057 | BARFIELD 115-00057 PITOT STATIC ADAPTER, 1/2 IN ID | 3 | |
1150819 | CABLE-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10231007 | ADAPTER FOR FLIRT-360 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11524A | CONNECTOR ADAPTER APC-7 TO TYPE N-(F) | 2 | |
1159GSE50293-1 | BUSHING ASSY-JACKING ADAPTER MLG | 1 | |
1159SEFL20282-1 | ADAPTER-BRAKE BLEED | 2 | |
11B71-11963-1 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11B71-11963-2 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11B71-11963-3 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11B71-11963-501 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3005 | TOOL KIT - ADAPTER-IGV&VAR STTR VANES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3012 | ADAPTER - BALANCE AND GRIND-HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3044 | ADAPTER ASSEMBLY - OVERHEAD SUPPORT - ENGINE MODULES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3114 | GRIND - ADAPTER - HP COMPR ROTOR-SEAL ROTATING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3114G05 | GRIND, ADAPTER - HPC ROTOR - SEAL ROTATING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3163 | ADAPTOR - LIFT TCF HORIZONTAL/ VERTICAL (LIFT ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3204 | ADAPTER - TORQUE LOCKNUT - NO 1 BRG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3301 | STAND - ADAPTER-ASSY/DISSY HP COMPR HALF-CASE FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3301G01 | STAND, ADAPTER-A/D HPC CASE HALF FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3407P01 | ADAPTER - BORESCOPE MOTOR, GENX ENGINES | 1 | |
11C3447P01 | ADAPTER, TORQUE - OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C3479G01 | ADAPTER - VSV/VBV | 1 | |
11C3515 | ADAPTER - THREAD - LPT CONE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4429G01 | ADAPTER - LOCKING, AGB 747-8F | 1 | |
11C4565 | ADAPTER - TORQUE LPT SHAFT TO ELECTRONIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4566G04 | ADAPTER SET, MANIFOLD PRESSURE CHECK-FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4613 | ADAPTER - ROLL AROUND STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4614 | ADAPTER - SHIPPING STAND TO JACKING LEGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4652 | ADAPTER - ENGINE IN PEDESTALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4652G01 | ADAPTER - PROPULSOR IN PEDESTALS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4714 | FIXTURE, PRESS - INSTALLATION OUTER RETAINER, AIR ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4811 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4811G01 | TOOL KIT, ADAPTER-ELECTRONIC PROTRACTOR VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4856 | ADAPTER, MOTOR - STARTER PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11MIT65B01221-4 | ADAPTER - WRENCH, HOLDING | 1 | |
11MIT65B01231-1 | TORQUE ADAPTER - RESTRICTOR SUPPORT TUBE, BODY LANDING GEAR | 1 | |
12-30-01 | KIT - NITROGEN CHARGING ADAPTER | 1 | |
12-30-02 | ADAPTER - OXYGEN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12-8006-16 | Bowers 12-8006-16 Kroeplin Bluetooth Interface Adapter for 12-G005 + 12-G010 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12-951 | 3/8 - 1/2 ADAPTER | 2 | |
1213655-1 | T-HEAD ADAPTER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
121G875041-601 | WIRING HARNESS,PS ADAPTER-CYCLE STICK TEST BENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12845-564-001 | IC-600 PROGRAMMING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12AA221 | 8MM ADAPTER FOR MAGNETIC STAND (FOR MITUTOYO SURFTEST SJ-210 SURFACE ROUGHNESS TESTER CODE: 178-560-01D S/N: 614031811) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12BAK728 | SURFTEST SJ-210 POWER ADAPTER CORD SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12ME65B00713 | REAR ADAPTER AND YOKE - ENGINE HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12ME65B02000 | ADAPTER - TORQUE, INBOARD TRAILING EDGE FLAP, MAIN CARRIAGE | 8 | |
12MIT65B00141 | MISCELLANEOUS TOOL - TORQUE TOOL ADAPTER | 4 | |
12MIT65B00719-9 | ADAPTER - TRQ WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
12XHBU-SS | ADAPTER - PRESSURE (3/4-INCH FLARELESS FITTING AT ONE END AND 3/4-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
130-380042-1/935 | CALIBRATION ADAPTER TEST BOX (MEGGIT) MM 350 ATA 77-00-00 | 2 | |
132.5312 | WHEEL ADAPTER RING FOR 3-1720 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
132.5313 | WHEEL ADAPTER RING FOR 3-1701 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
134-03428-402 | TRIPOD JACK ADAPTER MAIN - RIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
135-03428-401 | TRIPOD JACK ADAPTER MAIN - LEFT | 3 | |
13ME65B00713 | TIEBAR - GROUND HANDLING ADAPTERS, JT9D POWER PLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13MIT65B00717 | ADAPTER - EMERGENCY JACKING, AIRPLANE RECOVERY | 1 | |
13MIT65B00717-M | ADAPTER -0 EMERGENCY JACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
14-6801-0120 | TIRE BEAD BRAKER MODEL 14-6801-0120 (TRONAIR) MUST INCLUDE MLW ADAPTER RING Z-1063-17 AND NLW ADAPTER RING Z-1064-10 | 11 | |
145G0115-1 | TORQUE ADAPTER - VERT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
14PF465KF-1001 | SPLINE ADAPTER - TOR-QUE TUBE | 6 | |
14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 6 | |
14PF465KF-1001 | SPLINE ADAPTER - TORQUE TUBE | 6 | |
14PF465KIT | SPLINE ADAPTER - TOR-QUE TUBE | 2 | |
14PF465TOOL | ADAPTER FLAP/SLAT DRIVELINE - FEMALE SPLINE | 7 | |
14PF465TOOLM | ADAPTER FLAP/SLAT DRIVELINE - MALE SPLINE | 4 | |
1565 | ADAPTER - OIL FILLER | 4 | |
1583527-1 | CCII; SA ADAPTER-6-26 & MICRO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
15W1001001 | INLET LIFTING ADAPTER (E-170) | 2 | |
16067 | ADAPTER CABLE - HD44 TO DB15, 1.5 FEET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16081 | ADAPTER CABLE - 53-PIN TO 31-PIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
163563 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
173775 | ADAPTER-OXYGEN CHARGING (CREW PORTABLE) | 5 | |
173778 | ADAPTER-OXYGEN CHARGING (DO NOT ORDER, REPLACED BY GSB1210012) | 6 | |
173784 | ADAPTER - OXYGEN CHARGING | 18 | |
13030002 | ADAPTER 1/2" - 3/8" | 3 | |
13030005 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | 2 | |
15030003 | ADAPTER 3/4" - 1/2" FOR E.C.K 17 | 3 | |
1680015818711 | ADAPTER - FORCE CHECK TOOL, RUDDER PEDAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16A24454L1-5 | ADAPTER ASSEMBLY, PURGING - EMERGENCY POWER UNIT NITROGEN LINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16A46196L1-1 | ADAPTER ASSEMBLY, DRAIN - FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16U14503-5/-801 | PITOT-STATIC ADAPTER SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
16U47001-1 | CABLE ADAPTERS - LOX QUANTITY SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
170-63080-801-11H1 | ADAPTER, SLING - INSTL/RMV, LEADING EDGE | 5 | |
173784 (PC-1006) | ADAPTER - OXYGEN SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
17A1513P01 | U-SHAPED TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
17ME65B00713-1 | ADAPTER - NOSE COWL HANDLING, ON-WING MAINTENANCE. JT9D ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
17TES0072 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | 7 | |
17TES0076 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
17TES0200 | CVR AUDIO MONITOR ADAPTER - L-3 COMMUNICATIONS CORP. | 1 | |
180501-100-0 | ADAPTER COVER-STATIC PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1811D403 | TESTER: PITOT,60-420KTS,50KFT, W/2 25FT HOSES & ADAPTERS | 5 | |
1811D405 | TESTER: PITOT,60-420KTS,35KFT, W/2 25FT HOSES & ADAPTERS | 5 | |
1811DA-OA | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 5 | |
1811DA0A | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 5 | |
1811GA425 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
1811GA445 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
1811GA463 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
1811GA465 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 11 | |
1811GA625 | TESTER: PITOT,20-250KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
1811GA635 | TESTER: PITOT,20-250KTS,3KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
1811GAA0A | TESTER: PITOT,20-650KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 5 | |
1811HA425 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
1811HA435 | TESTER: PITOT,60-420KTS,3KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
1811HA443 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
1811HA445 | TESTER: PITOT,60-420KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 7 | |
1811HA463 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & ADAPTERS | 6 | |
1811HA625 | TESTER: PITOT,20-250KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
1811HA645 | TESTER: PITOT,20-250KTS,4KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
1811HA665 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 2 | |
18253G-05 | DAVID CLARK 18253G-05 PLUG ADAPTER, CORD ASSEMBLY | 9 | |
18253G-10 | ADAPTER Y-CORD | 4 | |
18253G-12 | ADAPTER P/N 18253G-12 (DAVID CLARK) | 5 | |
18253G-18 | HEADSET PLUG ADAPTER (H10-66) | 3 | |
18253G05 | "ADAPTER - HEADSET (CONNECTOR U-92A/U TO PJ-055B/PJ-068) | 9 | |
1851M57P01 | ADAPTER-STARTER | 3 | |
186616-001 | KIT-RADS ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18821-3 | Barfield 18821-3 Pitot Test Adapter, For Aircraft | 3 | |
18821-4 | BARFIELD 18821-4 PITOT TEST ADAPTER, FOR AIRCRAFT | 7 | |
18C1025 | ADAPTER, GRIND - HPTR, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1030 | PLUG/ADAPTER SET - NO 5 BRG HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1052 | ADAPTER, HORIZ. BALANCE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1082 | ADAPTER, HORIZONTAL BALANCE - HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1107 | FIXTURE, ADAPTER GENSPECT HPC STG 2-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
18C1609 | ADAPTER, LOCKING - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
190E2G0001 | ADAPTER, LEADING EDGE SLING-VERTICAL STABILAZER | 1 | |
190T06260-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
1938155-1 | COM-11801 ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE ETHERNET SWITCH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
196-T0071-401 | ADAPTER, SHOCK STRUT - MLG | 1 | |
196-T0089-401 | MLG TRAILING-ARM ADAPTER | 1 | |
196-T0099-401 | ADAPTER, SHOCK STRUT - NLG | 1 | |
196T07340-401 | ADAPTER, LIFTING - APU GENERATOR | 1 | |
196T07750-401 | ADAPTERS SET, LEAK-AGE TEST - FIREX SYS | 1 | |
196T07910-401 | ADAPTER, LIFT - AFT FAIRING PYLON | 1 | |
1981-H-000 | GROUND CONNECTOR ADAPTER-PRESSURE | 1 | |
1982-H-000 | GROUND CONNECTOR ADAPTER-SUCTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
19C0021 | ADAPTER,SUPPORT/LIFT-LPC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
19C0903G01 | ADAPTER SET BHGE 19C0903G01, PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR VARIBLE BYPASS VALVE (VBV) REPLACEMENT AND CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6167 | ADAPTER SET - ROLLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6170 | ADAPTER SET, ROLLOR-POWER TURB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6283 | ADAPTER, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6831 | ADAPTER SET, STATIC BALANCE - PT ROTOR SUB-ASSEMBLIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6833G01 | ADAPTER, STATIC BALANCE-COMPR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6834 | ADAPTER,STATIC BALANCE-COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6834G01 | ADAPTER,STATIC BALANCE-COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6835 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6835G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6836 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6836G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6881 | ADAPTER SET-FUEL MANIFOLD PR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6881G01 | ADAPTER SET-FUEL MANIFOLD PR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6940 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6940G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6941 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6941G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6993G02 | ADAPTER, SUPPORT - HIGH PRESSURE COMPRESSOR CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C6994 | ADAPTER - SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8033 | ADAPTER - DRIVE-SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8033G01 | Adapter, Splined - TGB, Borescope Inspection | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8096 | ADAPTER KIT - ELECTRONIC PROTRACTOR LM2500+ AND +(G4) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8167G01 | ADAPTER,BALANCE-HPT ROTOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208 | ADAPTER - DRIVE-GAS GENERATOR INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208 REV C | ADAPTER, DRIVE - GAS GENERATOR INSP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8208G02 | Adapter ,drive-gas generator inspection | 1 | |
1C8213 | ADAPTER - LIFT - COMBUSTION LINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8213G01 | Adapter, Lift - Combustion Liner DLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8302 | ADAPTER ASSY - MAINT DOLLY - EXTERNAL ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8315G01 | FIXTURE, I/R-SPLINED ADAPTER, HP COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8331 | ADAPTER - MAINTENANCE CORE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8344 | PULLER - SHAFT-FORWARD ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8344G01 | PULLER SHAFT - FORWARD ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8440 | ADAPTER ASSY, LIFT - COMBUSTOR & STG 1 OR 2 HP TURB NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8440G01 | Adapter Assy, Lift - Combustor and Stage 1 or 2 HPT Nozzle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C8444 | ADAPTER SET - ELECTRONIC PROTRACTOR-V STTR VANE RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9186 | ADAPTER, SLEEVE-LP TURB ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9316 | ADAPTER - SLEEVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9316G01 | ADAPTER, SLEEVE - LPT ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9317 | ADAPTER - SUPPORT/LIFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9317G01 | ADAPTER SUPPORT/LIFT - LPC SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT LOW PRESSURE COMPRESSOR (LPC) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9362 | ADAPTER ASSY, LIFT-COMBUSTOR & STG 1 OR 2 HP TURB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9362G02 | Adapter, Lift - Combustion/Stage 1 or 2 HPT Nozzle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9373G01 | ADAPTER SET - PEDESTAL TURBINE, REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9375 | ADAPTER SET ASSY - SUPPORT - AIR COLLECTOR - FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9375G01 | ADAPTER SET - SUPPORT AIR MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9377 | ADAPTER SET - SUPT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9377G01 | ADAPTER SET ASSEMBLY - SUPPORT LPC FORWARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9378 | ADAPTER - MAINT DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9378G02 | ADAPTER ASSEMBLY - MAINTENANCE DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9393 | ADAPTER SET - PRESSURETEST/RIG-VIGV - VBV &VSV SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9393G01 | ADAPTER SET PRESSURE TEST/RIG - VIGV, VBV, VSV SPECIAL TOOL FOR PRESSURE TEST | 2 | |
1C9397G01 | HOLDER, SHIM - HPTR TUBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9449 | ADAPTERS, TEST STAND-FLOW FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9458 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9458G01 | TOOL KIT - ADAPTER-ELECTRONIC PROTRACTOR - VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9609 | ADAPTER ASSY, DRIVE-REAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9609G01 | Adapter Assembly, Drive - Rear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9626 | TORQUE ADAPTER - PRESSURE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
1C9626G01 | Torque Adapter, Pressure Tube/Coupling Nut-Hpt Rotor | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2-020V747-75 | PREFORMED PACKING (USE WITH ADAPTER 803213-S58-2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2-264S604-70 | PREFORMED PACKING (USE WITH ADAPTER 803440-S58-10) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20-4502-6000 | OXIGEN PRESSURE REGULATOR (TRONAIR) & ADAPTER - OXYGEN CHARGING P/N PC-1006 | 14 | |
200-000-102 | ADAPTER KIT, QEC DOLLY- | 1 | |
2000-0154-18 | ADAPTER-CALIBRATION ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2024 | ADAPTER-INST/REM, FU | 10 | |
20293 | ADAPTER- PRESSURE HEAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
240045 | PPG SEMCO 240045 MODEL 250-A GUN HANDLE WITH ADAPTER | 1 | |
280985 | HOLDER - DRIVE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
290166 | ADAPTER-VALVE TEST | 2 | |
290167 | SPL-6643 ADAPTER - COMPONENT TEST PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
290169 | 290169 T ADAPTER - VALVE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000435 | P180 towbar head for Piaggio P-180 Avanti aircraft. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer); Scorpion + AD-P180/MU2 adapters. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000483 | CNA2 towbar head for Cessna Caravan (all). Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer); Scorpion + AD-CNA2/3 adapters. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000932 | 2-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000935 | 2-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000936 | 2-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000938 | 1-BOTTLE OXYGEN REGULATOR SYSTEM. 15' (457.2 CM) DELIVERY HOSE, BLEED & FLOW VALVE, OXYGEN CHARGE ADAPTER COMBO, MANUAL, AND CALIBRATION CERTIFICATES. | 1 | |
2000944 | 3-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2000948 | 1-BOTTLE LOW PRESSURE NITROGEN REGULATOR SYSTEM. 15' (457.2 CM) DELIVERY HOSE, AERO PART NUMBER 05-001 INFLATING VALVE ADAPTER, MANUAL, AND CALIBRATION CERTIFICATES. | 1 | |
2000951 | 4-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2001115 | WASTE Y-COUPLER W/ GA ADAPTER, WYE, 4-INCH.(FOR DASH-8 ATR MANUAL LAVATORY CART). | 1 | |
2001120 | 1-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
2001121 | 3-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2001122 | 3-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2001123 | 4-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2001212 | PNEUMATIC START WYE ADAPTER (Y-ADAPTER) | 1 | |
2001494 | OXYGEN CHARGE ADAPTER. JIC/AN-4 MALE FLARED TUB | 1 | |
2002203 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 8" tube with AN800-3 Aircraft Connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002205 | OXYGEN CHARGE ADAPTER. JIC/AN-4 MALE FLARED TUB | 1 | |
2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002764 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 3" bendable tube with AN800-3 Aircraft Connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002766 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 1" bendable tube with AN800-3 Aircraft Connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2002768 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 8" tube with AN800-3 Aircraft Connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
200909-CA | ADAPTER-MLG JACK | 6 | |
200909CA | ADAPTER-MLG JACK | 6 | |
200951-A | ADAPTER-NLG JACK | 6 | |
200951A | ADAPTER-NLG JACK | 6 | |
200951A-REVC | ADAPTER-NLG JACK (EQ. TO TMHNA01-00-00 AND D22827000 | 1 | |
2026598 | OXYGEN CHARGE ADAPTER COMBO- 2500 PSI MAX- 1/4 MAL | 1 | |
204-92202-1 | FCAS TEST ADAPTER MX-10664/G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
20MIT65B01211-1 | ADAPTER WRENCH, NUT - WLG UPPER SHOCK STRUT | 1 | |
2100-10 | METER - SOUND LEVEL, 40 DBC TO 140 DBC, CALIBRATOR, ADAPTER, & CASE. | 1 | |
21940-00 | TORQUE WRENCH ADAPTER-BATTERY CAP | 1 | |
21A00355 | ADAPTER - WIRE PULLER | 3 | |
21A00355-1 | ADAPTER - WIRE PULLER PLIERS - SPREADER, | 1 | |
21C14030 | ADAPTER, HOIST - HORIZONTAL ENGINE (-39E) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
21C7439P01 | GAS GENERATOR SHAFT TIE-BOLTS RESTRAINING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
21Y2577A | ADAPTER-SPECIAL | 2 | |
2210-D10-1040 | TEST ADAPTER - ADC | 1 | |
2241-C-36 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 2 | |
2241-C-36 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 2 | |
2550139 | Adapter-Spline | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2558725 | OUTBOARD WHEEL-HALF, SUPPORT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2558753 | ADAPTER-SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2558915 | ADAPTER-SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2558917 | ADAPTER-SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2566548 | HEATED SERVO FITTING ADAPTER (AN-8 TO AN-4 REDUCER) | 1 | |
2566549 | AN-1 to AN-4 Fitting Adapter | 1 | |
2591553 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23003623 | ADAPTER - LIFTING, COMBUSTION LINER | 3 | |
23005426 | GUIDE +Ã-Ã-Ã SPUR ADAPTER, GEAR SHAFT | 4 | |
23006778 | GUIDE----BEARING, SPUR ADAPTER GEARSHAFT | 5 | |
23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
23006785 | INSTALLATION TOOL--PACKING, SPUR ADAPTER GEAR | 2 | |
23008681 | Adapter-Oil Inlet Line | 1 | |
23008682 | ADAPTER----OIL OUTLET LINE | 2 | |
23032403 | WRENCH & HOLDER - 2ND STAGE TURBINE SPLINE ADAPTER | 2 | |
23033037 | HOLDER--COMPRESSOR ROTOR COUPLING ADAPTER | 1 | |
23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
23051212 | Adapter-Stand | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT-DRIVE | 2 | |
23055299 | GSE 164 ADAPTER - LIFTING, ENGINE ASSY | 7 | |
23055724 | ADAPTER,WRENCH-1GV TORQUE TUBE | 4 | |
23055729 | ADAPTER ENGINE LIFTING-AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23055758 | ADAPTER- AFT ENGINE HANDLING | 7 | |
23055759 | ADAPTER -AFT ENGINE LIFTING | 7 | |
23063525 | ENGINEADAPTER-COMPRESSORCLEANI | 6 | |
23063525-201 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
23063525-202 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
23063525-203 | ENGINE ADAPTER - COMPRESSOR CLEANING CART | 2 | |
23066522 | GSE 262 ADAPTER - FWD ENGINE LIFTING | 7 | |
23066566 | GSE -261 FWD SUPPORT ADAPTER | 7 | |
23068496 | ADAPTER Â 602 POWER-DYNE POWER WRENCH | 1 | |
23068496-1 | ADAPTER - DETAIL 1 PART OF 23068496 | 1 | |
23068546 | ADAPTER - WRENCH, VARIABLE VANE TORQUE TUBE ASSEMBLY | 1 | |
23083893 | ADAPTER: TORQUE,B-NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2310-T030-401 | ADAPTER - CHANGING, NLG WHEEL | 2 | |
2317-T020-401 | ADAPTER - CHANGING, NLG WHEEL | 2 | |
2344-0051-19 | MALE SQ ADAPTER 3/4 X 1-1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23D19238-1 | TOOL-ADAPTER, INFLATE/DEFLATE VALVE | 4 | |
247C5079 | ADAPTER - NUT - TORQUE - NO. 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5111 | TORQUE ADAPTER-COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5185 | ADAPTER SET, AFT FLANGE - INTMD POWER TURBINE FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5255 | ADAPTER SET - DOLLY - MANITENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5256 | ADAPTER SET - MAINTENANCE DOLLY-IPT CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
247C5260 | FIXTURE - FORWARD ADAPTER - REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2548G-23 | ADAPTER HARNESS - BARFIELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
256035-PT | 256035-PT PRESSURE TRANSDUCER (OPTIONAL) PRESSURE TRANSDUCER. RANGE 0-750/1000 PSIG. INCLUDES: ADAPTER AND BRACKET . T-FITTING . HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2571005-001 | ADAPTER, DRIVE, ANTI-SKID TRANSDUCER | 1 | |
257562-58 | Adapter- Valve Test | 1 | |
259-202702-4-3 | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2591553-903 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK | 3 | |
259996-01 | DATA LOADER CABLE ADAPTER ASSY - ARINC 615/603 | 1 | |
25B17449-103 | ADAPTER-BOTTLE FITTI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
25Y635AB | ADAPTER ASSY-FUEL DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
25Y759A | ADAPTER-OIL CHARGING OLEO STRUTS | 6 | |
25YTS129R21A | ADAPTER - EXPANDING | 6 | |
25YTS303R17A | ADAPTER - FUEL FLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
25YTS303R1A | ADAPTER - FUEL FLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
26008573-101 | TPS SELF - TEST ADAPTER (PART OF KIT N 7 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
27-1-4324 | ADAPTER-CLUTCH TORQUE, FLAP DRIVE UNIT | 2 | |
27-18-90424 | ACOUSTIC ADAPTER FOR 89-01 SERIES | 1 | |
27-5-4 | Adapter Dollie ( A' Dimension: .187" )( B' Dimension: 1" )( C' Dimension: 1/2" )( D' Dimension: 7/16" )( Thread Size: 3/8"-24 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
27.1-4324 | ADAPTER-CLUTCH TORQUE FLAP DRIVE UNIT F50 | 2 | |
28-0-1067H | ADAPTER - FUSELAGE JACK, FRONT | 4 | |
28-0-1380 | Torque Adapter- Nose Wheel Axle Nuts | 5 | |
28-0-4893 | TORQUE ADAPTER SLIP-CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
28-0-5011 | SET- ADAPTER LIFT DUMPER MECHANICAL | 2 | |
28.0.4893 | TORQUE ADAPTER SLIP-CLUTCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
284357-1 | HOISTING ADAPTER SAT-1091 | 1 | |
287554-2 | ADAPTER-VALVE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
290222-1 | ADAPTER - TAIL SHUTOFF VALVE ICE PROTECTION | 1 | |
290395-1-1 | ADAPTER - PNEUMATIC VALVE TESTER (HONEYWELL INTERNATIONAL INC, ENGINE & SYSTEMS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
290435-1-1 | R ADAPTER - VALVE TEST | 4 | |
291B300-005 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-005A | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-010 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-010A | ADAPTER, HI-TORQUE | 1 | |
291B300-015 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-015A | ADAPTER, HI-TORQUE | 1 | |
291B300-HT3 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-HT4 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
291B300-HT5 | ADAPTER HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
293477-1 | ADAPTER-TURBINE STARTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294863-2 | MAINTENANCE STAND ADAPTER KIT HOLDS ENGINE ASSEMBLY IN 287750-1 MAINTENANCE STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C 14689G01 | ADAPTER, LIFT - COMBUSTOR | 2 | |
2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14040G05 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 3 | |
2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
2C14073G03 | ADAPTER - COUNTER TO | 2 | |
2C14113 | HPC ROTOR FWD SPLINE ADAPTER REMOVAL-INST. | 1 | |
2C14113G01 | FIXTURE, INSTALL AND REMOVE-COMP.ROTOR FWD. SHAFT SPLINE ADAPTER | 3 | |
2C14178G01 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME AFT FLANGE | 2 | |
2C14187G01TK | ADAPTER, LIFT FAN FRAME-HORIZONTAL | 1 | |
2C14203 | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14203 REV B | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14203G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 2 | |
2C14219 | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14219 REV A | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14224 | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14224 REV B | ADAPTER SET, PEDESTAL-LPT MODULE, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14224G02 | ADAPTER SET, PEDESTAL - LOW PRESSURE TURBINE MODULE, FORWARD | 1 | |
2C14283G02 | ADAPTER KIT, ENGINE DRY-OUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14286 | ADAPTER , CABLE -HMU TO MEC ENGINGPRESERVATION UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14290 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14635 | ADAPTER,MOTORING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14635 REV C | ADAPTER,MOTORING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14635G01 | ENGINE CORE MOTORING ADAPTER - CF6-80 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14649 | ADAPTER, CORE MOTORING - BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14649P05 | ADAPTER - CORE ENGINE MOTORING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14664 | TORQUE ADAPTER SET - RET NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
2C14685 | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14685G01 | ADAPTER-ANTI-TORQUE STOP ARM | 2 | |
2C14686 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
2C14686 REV P | ADAPTER, LIFT-LOW PRESS. COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14686G01 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14686G02 | ADAPTER, LIFT - LOW PRESSURE COMPRESSOR | 1 | |
2C14686G03 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14686G04 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14686G05 | ADAPTER, LIFT-LOW PR | 3 | |
2C14689 | ADAPTER - LIFT | 1 | |
2C14689 REV E | ADAPTER, LIFT-COMBUSTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14689G01 | ADAPTER, LIFT - INSTALL/REMOVE | 2 | |
2C14695G01 | ADAPTER, LIFT - HPT NOZZLE, STAGE 1 | 2 | |
2C14703 | ADAPTER - LIFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14703 REV A | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14703G01 | ADAPTER, LIFT - HPT STAGE 2 NOZZLE | 2 | |
2C14703G01TK | LIFT ADAPTER-HPT STAGE 2 NOZZLE | 1 | |
2C14717 | ADAPTER SET, PEDESTAL - FAN STATOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14717 REV A | ADAPTER SET, PEDESTAL - FAN STATOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14717G01 | ADAPTER SET, PEDESTAL - FAN STATOR | 4 | |
2C14726 | ADAPTER, PEDESTAL - ENGINE, FORWARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14726G03P11 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
2C14726G03TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
2C14726G04 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 4 | |
2C14726G05 | ADAPTER, PEDESTAL - ENGI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14729G01TK | ADAPTER SET, PEDESTAL-ENGINE AFT | 1 | |
2C14730 | ADAPTERS, PEDESTAL-COMP. STATOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14730 REV B | ADAPTERS, PEDESTAL-COMP. STATOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14737 | ADAPTER, LIFT-FAN CASE & FRAME AFT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14737 REV E | ADAPTER, LIFT-FAN CASE & FRAME AFT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14738 | ADAPTER, R/I - STAGE 1 FAN DISK NUTS | 1 | |
2C14738G01 | ADAPTER SET - INSTALL/REMOVE, STAGE 1 FAN DISK NUTS | 1 | |
2C14742G01 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
2C14742G05P48 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
2C14780 | ADAPTER, PEDESTAL - COMP REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14780 REV E | ADAPTER, PEDESTAL - COMP REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14780G01 | ADAPTER, PEDESTAL-CRF | 2 | |
2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
2C14793 | ADAPTER, LOCKING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14795 | ADAPTER, LIFT-ENGINE AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14795 REV A | ADAPTER, LIFT-ENGINE AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14827 | ADAPTER SET,PEDESTAL-ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14854G02 | ADAPTER - TORQUE, ENGINE FUEL FILTER | 3 | |
2C14856 | ADAPTER SET, SPANNER - AIRTUBE NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14900G01 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE | 1 | |
2C14903G01 | ADAPTER,BAL 3-9 SPOOL (AFT) AND 11-14 SP | 1 | |
2C14922G01 | ADAPTER,BALANCE-LPT MODULE | 1 | |
2C14923P03 | ADAPTER,BALANCE-LPT ROTOR,STAGE 1 | 1 | |
2C18020G02 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C18044G01 | ADAPTER SET ASSEMBLY, PEDESTAL - CRF | 1 | |
2C5196 | ADAPTER - WRENCH-#6 BRG LKNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5210G01 | ADAPTER - HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5243P01 | ADAPTER - LUBE TANK DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5275G01 | ADAPTER - LPT HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5611G01 | ADAPTER - HOIST COMP ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5650G01 | ADAPTER - HPT BLADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5653G01 | ADAPTER - COMB MODULE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5838G01 | ADAPTER - TORQUE FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C5883G01 | ADAPTER - GRINDER - HPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR | 2 | |
2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6047 | ADAPTER, PULLER - | 2 | |
2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6048 | PULLER ADAPTER-AIR SEAL AND | 2 | |
2C6048G01 | PULLER ADAPTER-AIR SEAL AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6049 | PULLER ADAPTER-ROTATING AIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6049G01 | PULLER ADAPTER-ROTATING AIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6105 | ADAPTER,DRIVE-TURBINE REVERSER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6359G01TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
2C6360G01 | ADAPTER, PEDESTAL-COMPRESSOR STATOR, FORWARD | 2 | |
2C6361G01TK | ADAPTERS, PEDESTAL COMP. STATOR-FWD. | 1 | |
2C6363G01 | ADAPTERS, PEDESTAL - FAN MIDSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6363G01TK | ADAPTERS, PEDESTAL-FAN MID SHAFT | 1 | |
2C6627 | ADAPTER,INSTALL-NO.4B BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6827 | ADAPTER, ASSY - LP COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6888G03 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE AND BLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C7140G01 | ADAPTER SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C8064G01 | SPLINE ADAPTER INSPECTION GONO-GO GAGE | 2 | |
2C8084 | ADAPTER KIT,ENGINE START CART-LUBE/SCAVENGE PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C8094 | ADAPTER, GRINDING-HP TURB ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81000 | ADAPTER, HOIST - ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81007G03 | ADAPTER,HOIST-ENGINE | 3 | |
2C81017G01 | BUILD-UP STAND ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81037G01 | ADAPTER - HPT/LTP COMBUSTION HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81039G01 | ADAPTER - HPT MODULE LIFT AND TURN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81062 | ADAPTER HOIST-ENGINE/INNER FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81080G01 | ADAPTER - MAIN MOUNT - COMBUSTI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81114G01 | ADAPTER, HOIST-FAN ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81407 | HPT, LOCKNUT-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81407G04 | HPT, LOCKNUT-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81416G01 | ADAPTER, HOIST - HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81446G01 | ADAPTER,WRENCH ARC-HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81463 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81463G01 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81463G02 | ADAPTER, TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81464 | ADAPTER TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81464G01 | ADAPTER, TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81482G01 | ADAPTER LIFT/TURN - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81601G01 | ADAPTER, HOIST-AGB | 2 | |
2C81625P01 | ADAPTER-TORQUE, LOCKNUT, (TORQ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81652G01 | ADAPTER, INSTALLER - BEARING, AXIS-B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81653G01 | ADAPTER, INSTALLER - BEARING, AXIS-D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81660G01 | ADAPTER, REMOVAL, AXIS-G FRONT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C81962G01 | ADAPTER, HOIST - STAGE 1-2 BLISK, HPC ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C90918G01 | ADAPTER - PLASMA SPRAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91000G01 | STAND - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91002 | ADAPTER, ON-WING MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91002G01 | ADAPTER - ON WING MX | 1 | |
2C91003G01 | ADAPTER - HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91004G01 | ADAPTER - ROTOR TRUNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91006G01 | ADAPTER - TRUNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91033 | ADAPTER - HOIST LPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91033G01 | ADAPTER - LPT HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91035G02 | ADAPTER - HPT HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91046G01 | ADAPTER, HOIST - COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91050G01 | ADAPTER - FAN SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91065G01 | ADAPTER - HOIST/PILOT | 1 | |
2C91067G01 | ADAPTER - ENGINE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91071 | ADAPTER, BORESCOPE-IGN PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91071G01 | ADAPTER - POSITIONING | 3 | |
2C91073G01 | ADAPTER - LPT HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91074G01 | ADAPTER - FAN DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
2C91082P01 | ADAPTER - COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91086G01 | ADAPTER - FWD ENG. SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91102G01 | ADAPTER - HPT SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91109G01 | ADAPTER -HPT HORIZONTAL HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91125G01 | ADAPTER-SPANNER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91169G01 | ADAPTER-TORQUE LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91182G01 | ADAPTER-PNEUMATIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91183 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91183G01 | ADAPTER-TORQUE LPT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91185 | ADAPTER-BAL-STATIC-STG 3 - 4 - 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91191G01 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91195G01 | ADAPTER, HOIST-FRONT COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91209G01 | ADAPTER-FAN ROTOR HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91217G01 | ADAPTER-TORQUE-LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91236G01 | ADAPTER-HOIST-ROTOR LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2F10366 | Adapter, Airflow (Outlet) - Engine Assy, No. 5 Brg. Compartment Cover, Installation & Oil Scavenget Outer, TEC | 1 | |
2G7899 | CFM56-5B STARTER DRAIN ADAPTER | 8 | |
2ME65B40005 | ADAPTER -0 AIR CYCLE | 1 | |
2ME65B40006 | ADAPTER - HEAT EXCHANGER | 9 | |
2ME65B89603 | ACCESSORY ADAPTER - HOIST SYSTEM, RB211-524, CF6-50 ENGINES | 3 | |
2ME65B94600 | AFT MOUNT ADAPTER - GE LIFT FIXTURE, CF6-50 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT1A264-0281-1 | ADAPTER PLATE - 120 GALLON TANK | 4 | |
2MIT2A264-0812 | ADAPTER PLATE-PORTABLE WATER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT2A264-0812-1 | ADAPTER PLATE - 40 TO 65 GALLON TANK (737NG ALL, 767 OPTIONAL AUX TANK SEE OPTIONS BELOW) (YOKOHAMA AEROSPACE AMERICA) | 5 | |
2MIT65-27535 | TORQUE ADAPTER-AILERON CONTROL COLUMN,CAPTAINS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65-45109-22 | MISC. TOOL ADAPTER -0 ENGINE UNIVERSAL PROTCR | 6 | |
2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
2MIT65B01202-1 | Wrench adapter-gland nut,nose gear | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B01203 | Torque Adapter -Retainer Nut. Body Landing Gear | 2 | |
2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
2MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B40719 | ADAPTER-OIL FILL CSD | 2 | |
2MIT65B80307 | Adapter-protractor,crank assy,elevator torque tube | 1 | |
2MIT65B81129 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER | 2 | |
2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
2MIT65B82106 | TORQUE WRENCH ADAPTER - AILERON CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B82215 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER, AILERON FORCE LIMITER | 2 | |
2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT65B90115 | ADAPTER - OIL SYSTEM DIFFERENTIAL PRESSURE SWITCH, RB211 ENGINE | 1 | |
2OHME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 5 | |
2PME65B80550 | REM/INSTL ADAPTER-INBD ELEVATOR ACTUATOR | 7 | |
2TE60B40037-1 | CABLE ADAPTER -0 TRW/CINCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
2TE65B80562 | TEST ADAPTER - DRIVE MECHANISM, STABILIZER TRIM | 1 | |
2TSJ65B01504-1 | TEST ADAPTER - VENT VALVE, TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2TSJ65B40700 | ADAPTER - TEST CABLE, DATA SIGNAL DISPLAY UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 21 X 7.25 - 10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 13.461 - 13.466 (341,91 - 342,04) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS 7.968/7.990 (202,39 - 202,95) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3-24406A | ETHERNET / USB ADAPTER - PTA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
300279-100 | ADAPTER-VALVE | 3 | |
3008-550 | ADAPTER-ACCESS PANEL LEVERAGE | 2 | |
301-547-206-0 | CFM56-5A/5B ENGINE BOTTLE ADAPTER QTY 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
30MIT65B00112 | Adapter assy-jacking,outbd wing,BBL 932.6 | 10 | |
314150 | Adapter, Flush Type - Alemite Midget | 10 | |
31505-4 | ADAPTER CABLE 1FT ARINC 603 31505-4 | 7 | |
31509-1 | ADAPTER CABLE - ARINC 615 PORTABLE DATA LOADER (PDL) TO ACARS-MU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
31530-2 | ADAPTER CABLE - ARINC 615 PORTABLE DATA LOADER (PDL) TO AIRBORNE DATA LOADER (ADL) CABLE | 2 | |
320008B-S0 | ADAPTER-SAMPLE FUEL | 3 | |
3244-TST | ADAPTER (CMM 38-32-04) (ATR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
330-024 | FEED-THRU BULKHEAD JACK ADAPTER, 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A91-4105-02 | JACK-ADAPTER PAD MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
332A91410502 | JACK-ADAPTER PAD MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
334010SAS-125-4 | Static Test Adapter - Boeing 717 | 2 | |
33410FFAB-125-4 | ADAPTER - STATIC TEST | 7 | |
33410FFAB125-4 | BARFIELD 33410FFAB125-4 STATIC TEST ADAPTER, FOR F | 7 | |
33410HB-125 | BARFIELD 33410HB-125 STATIC TEST ADAPTER, FOR AIRC | 3 | |
33410HH-125-4 | STATIC TEST ADAPTER - ATR42, ATR72, ATR42-500 | 7 | |
33410HH125-4 | BARFIELD 33410HH125-4 STATIC TEST ADAPTER, FOR AIR | 7 | |
33410LH-125-4 | ADAPTER - PITOT TEST | 20 | |
33410LH125-4 | Barfield 33410LH125-4 Static Test Adapter, For Boeing Aircraft | 20 | |
33410LH1254 | STATIC TEST ADAPTER - ATR42, ATR72, ATR42-500 | 20 | |
33410M-125-4 | ADAPTER - PPRV REMOTE STATIC PORT (PART SPL-6692) | 9 | |
33410MC-125-4 | ADAPTER - PPRV REMOTE STATIC PORT (PART OF SPL-6692) (GDC10105) | 2 | |
33410S70-4 | Barfield 33410S70-4 Static Test Adapter | 5 | |
33410SAS-90-4 | ADAPTER - STATIC TEST | 7 | |
3343090F | ADAPTER - PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
33455M70-4 | Barfield 33455M70-4 Static Test Adapter, For Bell Aircraft | 3 | |
3400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER DRIVE TOOL | 1 | |
3402244-1 | ADAPTER (AIR COND) C-130 74 "H" MODELS | 1 | |
3402779-1 | ADAPTER ASSY, STATIC PORT ALT PN 386-40-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3402822-1 | ADAPTER, TORQUE WRENCH F.S 737-817 . 25/32" | 1 | |
3402822-3 | ADAPTER, TORQUE WRENCH F.S 737-817 . 13/16" | 1 | |
3402822-5 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
3410M-125-4 | ADAPTER - PPRV REMOTE STATIC PORT | 1 | |
34130011-01 | ADAPTER # ADAPTOR-CHARGING,PITOT PR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
347-3001-14GSE | ADAPTER, PRESSURE RELIEF DOOR-ENGINE | 1 | |
34L4801 | ADAPTER -IBM 16/4 TOKEN RING CARDBUS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
34ME65B00713-1 | REAR ADAPTER - CORE ENGINE, JT9D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
35 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 1 | |
3511-180-45161 | ADAPTER-DRIVING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
35M50170000 | ADAPTERCABLE-ARINC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
35ME65B00713-1 | FRONT ADAPTER - JT9D CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
360-02971-200 | ADAPTER CABLE -DMU | 2 | |
360-02971-400 | ADAPTER CABLE - DMU | 2 | |
361-040-001 | GTF-2 TEST SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
36122 | ADAPTOR-CHARGING,PITOT PROBE OR ADAPTER-PITOT PROBE | 18 | |
362-04180A | TORQUE - ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
362-1775 | ADAPTER-EXTENSION TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
369D29826 | 4 BLADE TAIL ROTOR NUT #369D21716-5 TORQUE WRENCH ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
36MIT65B00141 | JACK ADAPTER-FORWARD BODY | 9 | |
36MIT65B00141-1 | JACK ADAPTER -0 NOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
36MIT65B00141-201 | Jack adapter-forward body | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
37-258501-10 | Hi-Pot Adapter | 1 | |
373RB | ADAPTER HYDRAULIC (SAFE-COR TOOLS) | 2 | |
38-162-01 | SENSOR-TESTER ADAPTERS | 1 | |
3840-727-M-F-1 | ADAPTER MAIN 3-1306-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3840-727-N-F-1 | ADAPTER NOSE 3-1070 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
390-810000/928 | JACK ADAPTER-MAIN LDG GEAR | 2 | |
3916731-507 | ANTI-SKID RETAINER NUT ADAPTER | 3 | |
3916732-1 | Spanner - Transducer Adapter, Anti-skid | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3916732-501 | Spanner - Transducer Adapter, Anti-skid | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3916732-503 | Spanner - Transducer Adapter, Anti-skid | 9 | |
3916732-505 | Spanner - Transducer Adapter, Anti-skid | 1 | |
3916752-501 | ANTI-SKID TRANSDUCER ADAPTER SPANNE | 1 | |
3956572-1 | Adapter - NLG Nitrogen Service | 7 | |
3961919-1 | Adapter-Torque Auto Throttle Disconnect Switch | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3981305-1 | ADAPTER - MLG AXLE NUT | 4 | |
3981308-1 | Adapter - A/S Transducer Spinner | 4 | |
3G1205G00131 | ADAPTER KIT, HELICOPTER SERVICING (BC-01-00) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G2505G00231 | ADAPTER, RESCUE HOIST OPERATOR CONTROL (FD-03-00) | 1 | |
3G2905G00132 | PCM ADAPTERS KIT, HYDRAULIC SYSTEM; TEST BENCH (GF-40-00) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6205G09031 | TROLLEY ADAPTER, M/R HEAD SUPPORT (HE-19 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6205G09132 | TROLLEY ADAPTER, SWASHPLATE SUPPORT(HE-20-00) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3G6405G05431 | TROLLEY ADAPTER, T/R HEAD SUPPORT HE-21-00 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 10 | |
3MIT65B03670 | ADAPTER - SAFETY ROD, HORIZONTAL STABILIZER ACTUATOR | 5 | |
3MIT65B04008-12 | SPLINE ADAPTER -0 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, FUEL TANK | 5 | |
3MIT65B40627 | ADAPTER - TORQUE, WEIGHT AND BALANCE TRANSDUCERS | 1 | |
3MIT65B80307-1 | Adapter -Control Column Assembly Protractor | 7 | |
3MIT65B80713 | Miscellaneous Tool Air Motor -Stabilizer Jackscrew Adapter | 3 | |
3MIT65B82585 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
3SF5940-101 | ADAPTER FOR TM20-6084 | 1 | |
3TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3TE65-73762 | JACKING ADAPTER -0 NOSE GEAR INST’L | 3 | |
3TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3TSJ60B00002 | ADAPTER - TILT TABLE, INERTIAL NAVIGATION SYSTEM (INS) UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4,6E 08 | MLG ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4-M10X1F80X-S | ADAPTERS METRIC MALE M10X1 - 7/16X20 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
400A0000-01W01 | FLAP-, SLATSYSTEM RIGGING SPLINE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
407-MR-F-01 | ANTI-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
407243-1 | ADAPTER-OXYGEN REFILLING | 10 | |
409 6620-239 | CF34-8 ENGINE STAND REAR ADAPTER. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
41035G-02 | 41035G-02 - DAVID CLARK ADAPTER CORD WITH PJ-051 JACK | 2 | |
41090G-15 | 41090G-15 CHARGER ADAPTER CORD 230 VAC | 2 | |
4158AS1122 | ADAPTER ARN-147 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4240-401 | ADAPTER KIT - RADIO FREQUENCY | 3 | |
440Y3 | TEST ADAPTER FOR 980L-1 / 1A | 2 | |
4507100101-003 | ADAPTER ASSY, JACK-WING | 2 | |
4507100101-005 | WING JACK ADAPTER WITH TIE-DOWN | 5 | |
4507100101-007 | ADAPTER ASSY, JACK-WING | 4 | |
4507100104-001 | Nose Jack Adapter Tie-Down | 3 | |
453-4010 | ELT DGL-1 PROGRAMING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
45A99147-001 | AXLE JACK ADAPTER (T-1) | 4 | |
460004459-5 | ADAPTER-TEST | 3 | |
460004459-6 | ADAPTER-TEST | 3 | |
460004459/5 | ADAPTER-TEST | 3 | |
460004459/6 | ADAPTER-TEST | 3 | |
460007035-3 | ADAPTER-TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
460007229 | ADAPTER - TORQUE | 9 | |
47001-001-000 | Adapter for CFM56-5A/B/C | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
47001-029-000 | CFM56-7 ENGINE PEDESTALS ADAPTER | 1 | |
47001-031-000 | Pedestal AdapterSet for LEAP-1B Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4757T122 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3900 | 1 | |
4757T123 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3200 | 1 | |
4757T124 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3200 | 1 | |
4757T125 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/4 MAX PSI;2600 | 1 | |
4757T126 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;2600 | 1 | |
4757T164 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/8 MAX PSI;3200 | 1 | |
4757T166 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3900 | 1 | |
4757T167 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3200 | 1 | |
4800-31 | HAZET UNIVERSAL ADAPTER 4800-31 | 1 | |
4916701-1 | ADAPTER - FUSELAGE JACKING | 9 | |
4916702-501 | ADAPTER - WING JACKING | 10 | |
4916706 REV P | ADAPTER - TORQUE MLG AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4916706-527 | Adapter - Torque, MLG Axle Nut | 5 | |
4916706-531 | Adapter-torque,main landing gear axle nut | 2 | |
4916745-501 | Adapter-torque,main gear door cylinder jam nut | 8 | |
4916759-501 | Adapter - Torque, MLG | 1 | |
4916776-501 | ADAPTER ASSY - NLG | 9 | |
4916787-1 | TORQUE ADAPTER - PASSENGER DOOR | 6 | |
4916790-1 | Adapter-torque restrictor support,NLG | 5 | |
4916795-509 | ADAPTER - STRUT NUT | 4 | |
4916799-501 | Adapter-Torque, Slat Cyl Jam | 2 | |
4936K415 | BSPP MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;5500 | 1 | |
4936K418 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;4500 | 1 | |
4936K419 | BSPP MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;4500 | 1 | |
4936K428 | BSPP MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3500 | 1 | |
4936K437 | BSPP MALE ADAPTER PIPE SIZE;A-1 B-3/4 MAX PSI;3000 | 1 | |
4936K715 | BSPT MALE ADAPTER PIPE SIZE;A-1/8 B-1/4 MAX PSI;5500 | 2 | |
49I6706 | ADAPTER - TORQUE MLG AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4A3844-9 | ADAPTER, TRANSDUCER (-16) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4MIT65B00732 | ADAPTER - SOCKET DRIVE | 2 | |
4MIT65B00772 | Adapter -Wrench. Sump Drain Valve | 10 | |
4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
4MIT65B04008 | ADAPTER - LUBE (4MIT65B04008-19 IS INCLUDED IN 4MIT65B04008 LUBE ADAPTER SET) | 8 | |
4MIT65B04008-19 | ADAPTER-LUBE | 1 | |
4MIT65B04308 | TORQUE ADAPTER - CARGO DOOR MECHANISM | 3 | |
4MIT65B80307-1 | ADAPTER EQUIPMENT - CONTROL WHEELS | 32 | |
4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5-2869 | LEVERAGE ADAPTER - ACCESS PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
501-1873-01 | ADAPTER FOR BC-815 | 2 | |
5020-1 | REFILL ADAPTER AVOX PN: 5020-1 | 2 | |
505T06280-401 | ADAPTER - TEST WHEEL SPEED TRANSDUCER | 1 | |
506-23-1 | TRIPOD JACKS - ADAPTER (CAP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
506-23-2 | TRIPOD JACKS - ADAPTER (CAP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
507.20.12.050 | PC-12 SINGLE POINT NOSE LANDING GEAR JACK ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
507.20.12.051 | PC-12 MLG JACK ADAPTER | 1 | |
552 | Cherry® Pulling Head Adapters ( For Screws: G87D )( Allows 1:: H84A-8, H83B-5MB, H83B-6MB ) | 2 | |
568 | ADAPTER 3/4" - 1/2" FOR E.C.K 17 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5653 | ADAPTER , 1/2 -3/4 | 6 | |
5784 | ADAPTER-GOOSENECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5930 | ADAPTER (FOR UNION P/NO. 35066-08) | 3 | |
5990 | ADAPTER (FOR UNION P/NO. 35066-16) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
50874 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
403475 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 2 | |
403561 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 1 | |
508747 | ADAPTER-PROBE PITOT STATIC | 2 | |
508747 (SUP. 53949) | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) (PART# 508747, SUP. 53949) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
509767 | ADAPTER - PROBE, PITOT-STATIC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4916706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS H27 X 8.5 -14 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5098T02G01 | HOIST ADAPTER - GENERAL PURPOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
50MIT65B00112 | Adapter assy aircraft jacking-WBL 585 | 9 | |
5120-01-144-5533 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
513.34.09.011 | ADAPTER-KIT, STATIC PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
515501 | ADAPTER _FOR SUP-PORT BRACKET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
52343A0659-01 | ADAPTER-R H | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5268-C-24 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 1 | |
5268-C-36 | CABLE - ADAPTER, TWO | 2 | |
5268-C-XX | TWO SINGLE BANANA PLUGS TO BNC MALE CABLE - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
52725A34 | BIT; HEX SHANK ASSORTMENT WITH ADAPTER, 30-PIECE, STEEL, SLOTTED SQUARE, EXTERNAL HEX | 1 | |
53-2921 | THD SHANK ADAPTER DRILL SET 3/4" OAL 4 PC. 3/32"-3/16" | 1 | |
53-2961 | THD SHANK ADAPTER DRILL SET 4PC, FRACTIONAL, 1-1/4 | 1 | |
53-77 | Drill Attachment Conversion Assembly ( Includes: 1/4"-28 Adapter 5/32" Chuck ) | 1 | |
5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
55-1021-03 | ADAPTER CABLE-TSD SYSTEM | 4 | |
55-5002-00 | Adapter PSD40-502-2 | 1 | |
55-5002-30 | Adapter PSD40-502-3 | 1 | |
550T05648-401 | ADAPTER, ASSY-PRESSURE TEST, ENGINE SHROUD | 1 | |
550T05649-401 | ADAPTER TEST- WHEEL SPEED TRANSDUCER | 1 | |
550T05652-401 | Adapter-Pressurization Test,Cabin | 1 | |
550T05654-401 | ADAPTER, ASSY-PRESSURE TEST, APU SHROUD | 1 | |
550T05658-401 | ADAPTER, JACKING-WING | 1 | |
550T05658-401 | ADAPTER, JACKING-WING | 1 | |
550T05661-401 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
550T05661-403 | ADAPTERS SET-FUEL LEAKAGE TEST,NACA | 1 | |
550T05666-401 | ADAPTER,SLING-HS LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
550T05670-401 | ADAPTER,SET-LASER TRACKER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
550T09071-001 | ADAPTER FITTING -PRESSURIZATION TEST | 1 | |
560-070 | Cherry® Pulling Head Adapters ( For Screws: G87D )( Allows 1:: H827-8, H828-8, H744-5MB, H744-6MB, H856-6MB, H828 ) | 2 | |
560XL | ADAPTER - FIBER OPTIC, SC-SC MULTIMODE | 3 | |
575108-100 | ADAPTER - TEST (ESCAPE SLIDE DEFLATION) | 1 | |
57ME65B00713 | ADAPTER - NOSE COWL HANDLING, ON WING MAINTENANCE, JT9D ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
582-520 | DRIVE SOCKET ADAPTER 3/8-1/4 INCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5826068-1 | COVER - GENERATOR ADAPTER | 2 | |
5916778-1 | ADAPTER-PNEUMATIC SY | 6 | |
5936856-1 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5936856-501 | ADAPTER-TORQUE | 2 | |
5955282-1 | Adapter Assy - Torque, MLG Trunnion Bolt | 4 | |
5962528-501 | Adapter-torque tailcone releas | 3 | |
5963440-1 | ADAPTER - CADC REMOTE TEST | 6 | |
5966368-1 | Adapter-Transducer Md90 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5981302-503 | Adapter-APU hoist | 1 | |
5MIT65B01231-1 | CROWFOOT WRENCH - ADAPTER, RETAINER NUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5MIT65B01500-1 | ADAPTER - TORQUE | 2 | |
5MIT65B01502 | Torque adapter-retract actuator B.L.G. | 1 | |
5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5MIT65B81129 | ADAPTER ASSEMBLY - TORQUE WRENCH INBOARD TRAILING EDGE FLAP DRIVE, INBOARD TRANSMISSION | 2 | |
5TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, CENTER WING TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60-3200-0010 | ADAPTERS - FUNCTIONAL TEST BOX ( 2 CABLES ) | 3 | |
60-3206-0008 | ADAPTER KIT-FUNCTIONAL TEST BOX, TDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60159-101 | ADAPTER-CABLE AY, ELECTRIC | 1 | |
602751-003 | PDL CABLE ADAPTER-MDDU | 1 | |
60MIT65B00112 | JACKING ADAPTER ASSEMBLY - OUTBOARD WING WBL 938.8 | 1 | |
61169-101 | TOOL-ADAPTER | 1 | |
612-00003 | LO-Z PROBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
61657-2 | WEAR GAGE - INLET ADAPTER | 9 | |
64980 | ADAPTER, TEST CLUB - ALL ENGINES WITH AS-127 TYPE 2 PROPELLER FLANGE WITH BUSHINGS FOR 7/16 IN. PROPELLER ATTACHING BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
69027 | ADAPTER - CORDLESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
69082 | CHERRY® PULLING HEAD ADAPTERS ( FOR SCREWS: G84 )( ALLOWS 1:: H701B-456, H753A-456 & H781-456 ) | 2 | |
628000 | MOBILE UV-LED LAMP WITH MAINS ADAPTER | 2 | |
635-6382-001 | 678P-1/2 (ASI-209-X) TEST SET ADAPTER FOR 628T-1/1B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
63605-001 | ALTERNATE BLEED AIR SOURCE (ABAS) KIT (REGULATOR P/N 63605−101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE P/N 63605−105) | 3 | |
63605-105 | 63605-101, AIR SUPPLY ADAPTER 63605-104, AIR HOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
63801-8901 | Crimp Adapter For DIN style dies In Molex 63801-8900 Pneumatic Crimp Machine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
63801-8902 | Crimp Adapter for 35mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
63801-8903 | Crimp Adapter for 22mm wide U-Dies in Molex 63801-8900 Pneumatic Crimp Machine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6400-3-4-O | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
64882-101 | ADAPTER, VACUUM 64882-101 (METAL PACKING FIXTURE) | 1 | |
649500_6 | ADAPTER 1/2"-3/4" DRIVE STAHLWILLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
64ME65B00713 | FRONT ADAPTER AND YOKE - ENGINE HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65037-1 | ADAPTER CABLE - ASSEMBLY | 1 | |
651-1904-007 | ADAPTER-TYPE CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65346-101 | OUTLET PORT ADAPTER(D18302 VALVE/REGULATORSEQUIPPED WITH FILLER VALVE889CAS10-1 ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
65D35557-1 | ADAPTER BOOM HOOK MHU-97/E | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
66-201 | ADAPTER-PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
66184-1 | ADAPTER-FOR HYDROSTATIC TESTING (HOSE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
66731-1 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 2 | |
6795791 | ADAPTER - LIFTING, TURBINE UNIT AND POWER SECTION | 3 | |
6795875 | ADAPTER - VIEWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796359 | ADAPTER - HOLDING, NO. 60 PROPELLER SHAFT | 4 | |
6796379 | ADAPTER - LEVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796464 | ADAPTER - LIFTING, COMPRESSOR | 2 | |
6796535 | ADAPTER - GAGE, TURBINE ROTOR TO VANE AXIAL CLEARANCE | 3 | |
6796540 | ADAPTER - LIFTING, TURBINE ROTOR | 2 | |
6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
6796577 | ADAPTER - DIFFUSER MOUNTING | 2 | |
6796644 | ADAPTER, STAND-TURBINE UNIT | 2 | |
6796692 | ADAPTER - STAND, REDUCTION GEAR | 2 | |
6796693 | ADAPTER - STAND, REDUCTION GEAR REAR CASE | 2 | |
6796694 | ADAPTER - STAND, ACCESSORY DRIVE HOUSING ASSEMBLY | 2 | |
6796696 | ADAPTER - STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796697 | ADAPTER - STAND, COMPRESSOR SECTION | 2 | |
6796716 | ADAPTER - DIFFUSER MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796717 | ADAPTER - COMPRESSOR AIR INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796726 | ADAPTER - MOUNTING, HORIZONTAL VIBRATION PICKUP | 2 | |
6796727 | ADAPTER - MOUNTING, VERTICAL VIBRATION PICKUP | 2 | |
6796760 | ADAPTER - BUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796810 | ADAPTER - ATTACHING, COMBUSTION CHAMBER CASING LIFT | 3 | |
6796813 | ADAPTER - MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796814 | ADAPTER - MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796815 | ADAPTER - TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796818 | ADAPTER – STAND, TURBINE UNIT 600 SERIES - | 1 | |
6796820 | ADAPTER - ATTACHING | 1 | |
6796821 | ADAPTER - TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796846 | ADAPTER - MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796871 | ADAPTER - LIFTING, POWER SECTION | 2 | |
6796891 | ADAPTER - TORQUE REDUCTION GEAR FILTER | 3 | |
6796899 | ADAPTER - PRESS, COMPRESSOR ROTOR 14TH STAGE END | 1 | |
6796900 | ADAPTER - PRESS, COMPRESSOR ROTOR 14TH STAGE END | 1 | |
6796965 | ADAPTER - ATTACHING, COMPRESSOR UNIT TO STAND | 2 | |
6796972 | ADAPTER - LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796978 | ADAPTER - RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796999 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797179 | DRIFT - TURBINE COUPLING SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797690 | ADAPTER - LIFTING, TURBINE UNIT AND POWER SECTION | 2 | |
6797775 | ADAPTER FRONT-TORQUEMETER & SAFETY COUPLING | 1 | |
6797776 | ROLLS-ROYCE ALLISON ADAPTER REAR TORQUEMETER & SAFETY COUPLING ASSY | 2 | |
6797899 | ADAPTER - INSTALLATION AND REMOVAL SCREW THREAD INSERT | 1 | |
6798089 | ADAPTER-SUPPORTING | 3 | |
6798316 | ADAPTER - TURNOVER STAND | 2 | |
6798981 | ADAPTER - SPLINED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6798984 | ADAPTER - FRONT REDUCTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6799523 | ADAPTER - TRUNION, TURBINE ROTOR STAND | 2 | |
6799619 | ADAPTER - LIFTING, TURBINE ROTOR | 3 | |
6799620 | ADAPTER - LIFTING, TURBINE UNIT | 3 | |
6799790 | ADAPTER +Ã-Ã-Ã ENGINE TURNING, SPARE HYDRAULIC DRI | 3 | |
6799877 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET | 1 | |
6799878 | ADAPTER CABLE - TORQUEMETER RUNOUT TEST SET PHASE DETECTOR | 1 | |
6799976 | ADAPTER - ENGINE AIR INLET PAD | 2 | |
6851348 | ADAPTER - GEAR BOX COVER | 2 | |
6872473 | Bracket ADAPTER- MOUNTING | 1 | |
6872503 | ADAPTER - AIR FLOW FIX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6872550 | HOLDER - COMPRESSOR ROTOR COUPLING ADAPTER | 2 | |
6872646 | GUIDE-SPUR ADAPTER GEARSHAFT BEARING | 2 | |
6872832 | PULLER - COMPRESSOR ADAPTER | 2 | |
6872936 | ADAPTER - SERIES 1 1ST STAGENOZZLE FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6872945 | ADAPTER - SERIES 2 3RD AND 4TH STAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6873007 | ADAPTER----COMPRESSOR ADAPTER COUPLING | 1 | |
6887894 | ADAPTER - SCAVENGE OIL PRESSURE TEST | 1 | |
6891195 | PULLER - COMPRESSOR ROTOR SPLINED ADAPTER | 2 | |
6893362 | ADAPTER - EXHAUST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6893376 | ADAPTER - ATTACHING, GAS PRODUCER | 2 | |
6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
6897833 | ADAPTER - SHROUD BLEED AIR MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6897868 | PULLER - SPLINED ADAPTER | 2 | |
6898448 | ADAPTER - TEST, ENGINE DIFFUSER BLEED PRESSURE | 1 | |
58026233 | ADAPTER-CRADLE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
58522089 | ADAPTER, SOCKET WRENCH MODEL 7789-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
460006201 | ADAPTER- TURNING TUBE CAP | 2 | |
460006228 | ADAPTER - TORQUE | 14 | |
460006229 | ADAPTER-TORQUE | 2 | |
460006404 | ADAPTER-TORQUE | 17 | |
460006591 | ADAPTER-BOGIE MOUNTING | 1 | |
460007156 | ADAPTER GAS CHARGING - MLG | 12 | |
460007196 | Torque Adapter- | 5 | |
460007229 | ADAPTER - TORQUE | 9 | |
460007230 | ADAPTER-TORQUE AXLE NUT-A320 | 27 | |
533213728 | STAHLWILLE ADAPTER DIA 0.30-32 UNF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4309901280 | ADAPTER-NLG AXLE TRANSMISSION SPNUT | 1 | |
46E08 | MLG ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
4920010918719 | PSD-90 F-15 ADAPTER KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6801-4-3 NOW | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6801-4-3 NWO | ADAPTER - ALTITUDE PRESSURE SWITCH TO AIR DATA TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
68060-AM1C-27 | AIR DRIVEN GENERATOR TEST ADAPTER P/N SPL-11921 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
680B204 | ADAPTER-SLEEVE | 1 | |
680B205 | Cherry® Pulling Head Adapters ( For Screws: G686B-S, G689, G700 & G784 )( Allows 1:: H753A-456 & H781-456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
680B57 | ADAPTERS FOR PULLING HEADS 680B57-1,680B57-2 | 1 | |
68D310053-1003 | PSD-90 F-15 ADAPTER KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
69002647-001 | 69002647-001 (ETHERNET ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
69525-1 | ADAPTER CABLE - ASSEMBLY | 3 | |
69ME65B00713 | ACCESSORY ADAPTER - HOIST SYSTEM, JT9D-7 ENGINE | 3 | |
6MIT65B00112 | Adapter-fuel tank ventilation | 5 | |
6MIT65B01201-1 | Wrench Adapter - WLG | 3 | |
6MIT65B01231-1 | TORQUE ADAPTER -0 BEARING | 4 | |
6MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
6MIT65B01503 | TORQUE WRENCH ADAPTER - ROD END, NLG STEERING ACTUATOR | 3 | |
6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
6TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7-00063-60 | ADAPTER - OBJECTIVE HEAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7-00063-69 | ADAPTER - OBJECTIVE HEAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7-1772 | ADAPTER CABLE LAU-117 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7-6915-1 | TEST CABLE ADAPTER 7-6915-1 (FOR SLIDE 67952-10401 ONLY) | 1 | |
7010SN | ADAPTER CLOCK COMPARATOR - DIGIMESS | 1 | |
704-2383-001 | ADAPTER CABLE - ACARS MU | 1 | |
704-2389-001 | ADAPTER CABLE - HONEYWELL PDL TO EEC DATA LOAD CABLE | 3 | |
704-2389-001 97896 | SPL-14314 Adapter Cable - Honeywell PDL to EEC Data Load Cable 704-2389-001 97896 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
704-2567-001 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
704-2619-001 | ADAPTER CABLE-DATA LOADER | 2 | |
704-3058-002 | SSCVR/HFR5-V ADAPTER CABLE | 1 | |
7073 | Adapter-Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7079 | Adapter-Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7084 | Adapter-Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
70449 | Threaded Shank Drill Adapters ( Shear Part Number: 1/4" Hex )( Thread: 10-32 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
70456 | THREADED DRILL ADAPTER 1/4" HEX X 1/4-28 THD | 3 | |
72-500-04 | ADAPTER CABLE SERVO VALVE (DOES NOT CHECK B3 & B4 - 2ND VALVE ASSY.) | 1 | |
72051584-1 | ADAPTER-PROBE,LIGHT METER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
724-PSEU | ADAPTER 100-240V | 2 | |
73-0067-02 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
730N/65 | TORQUE WRENCH WITH ADAPTER (0-600 RANDE) | 1 | |
734-92713 | TORQUE ADAPTER (EQUIVALENT TO 771-16957) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92715 | TORQUE ADAPTER (EQUIVALENT TO 771-16959) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92717 | TORQUE ADAPTER (EQUIVALENT TO 771-16961) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734-92718 | TORQUE ADAPTER (EQUIVALENT TO 771-16963) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734147-1 | ADAPTER (HDF-FEM.) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
734148-1 | ADAPTER (HDF-MALE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
740A26 | Cherry® Pulling Head Adapters ( For Screws: G740A & G86A )( Allows 1:: H753A-456 & H781-456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
744-200 | CHERRY® PULLING HEAD ADAPTERS ( FOR SCREWS: G84 )( ALLOWS 1:: H744A-8, H827-8, H828-5MB | 3 | |
744-300 | Cherry® Pulling Head Adapters ( For Screws: G84 )( Allows 1:: H701B-456, H753A-456 & H781-456 ) | 4 | |
744-500 | CHERRY?? PULLING HEAD ADAPTERS FOR SCREWS: G84-L | 1 | |
744-600 | Cherry® Pulling Head Adapters ( For Screws: G84-LS )( Allows 1:: G704B, G747 & G746A ) | 1 | |
744-700 | Cherry® Pulling Head Adapters ( For Screws: G84-LS )( Allows 1:: G83 & G84 Bayonet ) | 1 | |
744A20 | Cherry® Pulling Head Adapters ( For Screws: G744 )( Allows 1:: H753A-456 & H781-456 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
75 25Y1859-1 | ADAPTER - REFUELLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
751204 | ADAPTER -GAGE BILT | 2 | |
767 PITOT TEST ADAPTER KIT | PITOT TEST ADAPTERS PS76700-4-4-4 | 1 | |
77144-T | ADAPTER-TORQUE, AUTO BRAKE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77144-T6 | SPL-5279 ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
77144-T6PM | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
772B | ADAPTER - INFLATION KIT | 3 | |
772B MK2 | ADAPTER - INFLATION KIT | 8 | |
772BMK2 | ADAPTER - INFLATION KIT | 8 | |
78100011543 | ROSE ANALYSIS UNIT ADAPTER CABLE - 17TES0072 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
78100011547 | ROSE ANALYSIS UNIT - RECORDER USB FDAU SIMULATOR (RUFS) (RI) ADAPTER - 17TES0076 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
79000218-1 | TEST UNIT ADAPTER - FCE BATTERY | 1 | |
7900021801 | TEST UNIT ADAPTER-FCE BATTERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
79000494-1 | CFM56 VBV - LUBRICATION ADAPTER | 3 | |
7C2218 | ADAPTER SET - VSV ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7C2244 | ADAPTER, PEDESTAL - CDN. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7C2518G01 | ADAPTER EXPANSIBLE CHUCK - HPCR PARTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 2 AND 3 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7TE65B00776-51 | HARNESS-CAL/ADAPTER | 1 | |
800-0630 | USB-429 INTERFACE BOX ADAPTER | 5 | |
80061-5 | PMAT 2000 to PMAT NT with in-line AC Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
80072-4 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG, PMAT2000 (EFB) | 5 | |
80080-1 | PMAT XS & PMAT 2000 6.F FT ARINC 615A LOAD TO RJ45 ADAPTER KIT /COFC INCLUDES CABLE 80079-1 | 7 | |
80088-1 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG, LAPTOP (EFB) | 2 | |
802-0137 | Lockheed L-209 Portable Rack Adapter | 1 | |
802-0162 | Plessey PV-1584 Portable Rack Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
802-0320 | RSU/USB PTI ADAPTER (650-0320) | 2 | |
8028181-10 | ADAPTER SET MHU-25 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8028182-10 | ADAPTER, M-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
80321-S58-12 | REGULATOR TEST ADAPTER 0.500-14 ANPT THREADS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
803213-S58-1 | REGULATOR TEST ADAPTER 0.750 - 16UNF2A X 0.250 - 18 ANPT THREADS | 1 | |
803213-S58-12 | REGULATOR TEST ADAPTER 0.500-14 ANPT THREADS | 1 | |
80A3720901K1M1TK | No.4RB CF6-80A3 Radial Clearance Adapter | 1 | |
80A3720901K2M1TK | No.6RB CF6-80A3 Radial Clearance Adapter | 1 | |
80AC720901K4M1TK | No.4BB CF6-80A3 Radial Clearance Adapter | 1 | |
80AK | ADAPTER - THERMOCOUPLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
80AK-A | ADAPTER - THERMOCOUPLE | 2 | |
80C2720901K1M1TK | No.4RB CF6-80C2 Radial Clearance Adapter | 1 | |
80C2720901K2M1TK | No.6RB CF6-80C2 Radial Clearance Adapter | 1 | |
810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 19 | |
816 | ADAPTER-NOSE JACKING A330 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
822-0030-001 | ADAPTER- SLIP CLUTCH TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8221381-01 | ADAPTER - STATIONARY INNER SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
826005-17 | ADAPTER - HOT WIRE ANEMOMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
826005-24 | ADAPTER - HOT WIRE ANEMOMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
830-6277-001 | ADAPTER-TEST UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833811-01 | AIS-380 FUEL FLOW ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833834-1 | ADAPTER - CABIN PRESSURIZATION TESTER | 3 | |
833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
834730-1 | ADAPTER - TORQUE, STARTER CLUTCH | 1 | |
8461 | ADAPTER CABLE - HONEYWELL ZING | 1 | |
834750 | Adapter-Link | 1 | |
835284 | Set-Adapter PWR Flush | 1 | |
8457784 | M-10 ADAPTER SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
85255A11 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 42 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
85255A13 | FLEXIBLE BIT ADAPTER FOR POWER TOOLS FOR 156 IN.-LBS. MAXIMUM DRILL TORQUE | 1 | |
8546607 | ADAPTER ASSY - REAR, GSE 71X-00-04 | 2 | |
856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BE | 2 | |
856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
856A1000 G06 | Torque Adapter, I/R - No. 3 Brg Locking Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEA | 4 | |
856A1000G09 | TORQUE ADAPTER, I/R - NO. 3 BRG LOCKING NUT | 6 | |
856A1006 | ADAPTER TORQUE - COMPRESSOR ST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1006 G01 | Torque Adapter Wrench - Compressor Stator To Support | 8 | |
856A1006 REV F | ADAPTER TORQUE-COMPR. STATOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1006G01 | Adapter torque-compressor stator nuts | 8 | |
856A1022P05 | CFM 56-3 TORQUE ADAPTER WRENCH | 7 | |
856A1022P06 | CFM 56-3 TORQUE ADAPTER WRENCH | 6 | |
856A1036G01 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR TO SUPP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1039 | ADAPTER-INLET GEARBOX TO POWER ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1039 G01 | ADAPTER - INLET GEARBOX TO POWER ARM | 8 | |
856A1039G01 | ADAPTER- INLET GEARBOX TO P' | 8 | |
856A1039G01 | ADAPTER-INLET GEARBOX TO POWER ARM | 8 | |
856A1084G04 | VSV-VBV ADAPTER CFM56 TES | 28 | |
856A1089 | Adapter- HPTR To Compressor Rotor Nuts | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1089G03 | ADAPTER - HPT ROTOR TO COMPR ROTOR NUTS | 6 | |
856A1089G04 | ADAPTER - HPT ROTOR TO COMPR ROTOR | 4 | |
856A1094 | ADAPTER - HOLD POWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1098G01 | ADAPTER TORQUE WRENCH- HPT NOZZLE | 5 | |
856A1102 | ADAPTER, HORIZONTAL LIFT - FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1102 G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE | 9 | |
856A1102G01 | ADAPTER, HORIZANTAL LIFT-FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1102G02 | ADAPTER, HORIZANTAL LIFT-FIXTURE | 1 | |
856A1102G03 | ADAPTER - HORIZONAL LIFT FIXTURE | 9 | |
856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
856A1312P29E | ADAPTER ARM SUPPORT ENGINE HANDLING - PEDESTAL | 1 | |
856A1336 | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 4 | |
856A1336 REV C | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1336G02 | ADAPTER WRENCH - FASTENER | 20 | |
856A1369 | FIXTURE, ADAPTER LINI- GAGE- DATA ACQUISITION SYS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1369 G04 | FIXTURE, ADAPTER LINI-GAGE - DATA ACQUISITION SYSTEM G01 | 4 | |
856A1369G01 | FIXTURE ADAPTER, LINI-GAGE - DATA | 1 | |
856A1369G02 | FIXTURE ADAPTER, LINI-GAGE - DATA ACQUISITION SYSTEM | 1 | |
856A1369G04 | FIXTURE, ADAPTER LINI-GAGE-DATA ACQUISITION SYSTEM | 4 | |
856A1467 G01 | Pressur Check-Fuel Manifold Adapter | 7 | |
856A1467G01 | Adapter, Pressure Check - Fuel Manifold | 7 | |
856A1469G01 | Adapter set,run on/off-main engine control/fuel pump nuts | 20 | |
856A1469G02 | Adapter set,run on/off-main engine control/fuel pump nuts | 15 | |
856A1523 | ADAPTER, DRIVE - AGB CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1523P01 | ADAPTER, DRIVE-AGB CRANK PAD(MANUAL DRIVE PAD | 2 | |
856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1616G02 | ADAPTER CABLE - EEC DATALOADING | 16 | |
856A1700G03 | CABLE ASSEMBLY-PDL 28VDC ADAPTER | 2 | |
856A1700G05 | CFM56-5B ECU/PDL ADAPTER CABLE | 7 | |
856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT (DAC CONFIG 01 PRE SB 72-0209) | 1 | |
856A1823 | ADAPTER, DRIVE - AGB CRANK PAD CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A1827G01 | Set-adapter,torque hydromechanical un & mn fuel pump nuts | 19 | |
856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
856A1836G01 | ADAPTERS, MAINTENANCE STAND-TO-FWD FAN STATOR SUPP | 8 | |
856A1865G01 | TORQUE ADAPTER,I/R-NO.3BRG 1 | 3 | |
856A2201G02 | ADAPTER SET, VIBRATOR-COMPR ROTOR BLADES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2213 | ADAPTER - KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
856A2335G01 | TORQUING / LOOSENING ADAPTER - N1/2 BRG SUPPORT | 3 | |
856A2335G02 | TORQUING / LOOSENING ADAPTER - N°1/2 | 4 | |
856A2502 | DRAIN ADAPTER - OIL TANK | 3 | |
856A2502 REV H | ADAPTER, DRAIN-OIL TANK OUTILLAGE DE VIDANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2502G02 | ADAPTER,DRAIN-OIL TANK | 1 | |
856A2502G06 | SPL-9870 ADAPTER - DRAIN, OIL TANK - CFM56-3 ENGINE | 11 | |
856A2525G01 | GUIDE ADAPTER - BOOSTER | 2 | |
856A2573 | ADAPTER, PULLER - LPT SHAFT PLUG (PULLER ADAPTER) | 2 | |
856A2573G01 | ADAPTER, PULL - LPT SHAFT PLUG | 6 | |
856A2607 | ADAPTER - LOCK CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2607G01 | LOCKING ADAPTER ENGINE CORE -CFM56 | 4 | |
856A2632G01 | PULL LPT-SHAFT PLUG ADAPTER | 23 | |
856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
856A2659 | FILTER ADAPTER - DRY OUT | 1 | |
856A2659G01 | FILTER ADAPTER - DRY OUT | 5 | |
856A2663 | ADAPTER, PULLER - SPLITTER FAIRING | 2 | |
856A2663G01 | ADAPTER, PULLER - SPLITTER FAIRING | 23 | |
856A2668 | KIT - PULLER ADAPTERS | 4 | |
856A2668G02 | KIT - PULLER ADAPTERS | 14 | |
856A2685 | ADAPTER, PULLER - OIL INLET COVER (PULLER ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2685G02 | PULLER ADAPTER - OIL INLET COVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 4 | |
856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
856A2700 | ADAPTER, PULLER- FAN | 3 | |
856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
856A2700G01 | PULLER ADAPTER - FAN BLADE SPACERS | 13 | |
856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 3 | |
856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2706G03 | BEAM TORQUE ADAPTER - FAN | 4 | |
856A2717 | ADAPTER - LOCK CORE ENGINE | 4 | |
856A2717G01 | ADAPTER-LOCK CORE ENGINE | 18 | |
856A2727G01 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | 13 | |
856A2732 | FLANGE, ADAPTER - TGB (FLANGE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2732G01 | FLANGE, ADAPTER - TGB (FLANGE ADAPTER) | 4 | |
856A2787 | BASEPLATE - FUEL PUMP ADAPTER SUPPORT (BASEPLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2787G01 | BASEPLATE - FUEL PUMP ADAPTER SUPPORT (BASEPLATE) | 6 | |
856A2797 | ADAPTER-FUEL RETURN VALVE | 2 | |
856A2797G01 | OIL-TEMPERATURE ADAPTER | 7 | |
856A2820G01 | LOOSENING ADAPTER - LPT COUPLING NUT | 2 | |
856A2902G02 | DUMMY ADAPTER - FAN DISK | 4 | |
856A2903G01 | TORQUINGBEAMADAPTER-FAN | 9 | |
856A2957G01 | ADAPTER - INNER SEAL, LUBRICATION UNIT | 8 | |
856A2985 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2985G01 | DRIVE ADAPTER-BOOSTER/LPT SHAFT | 4 | |
856A2992 | LOOSENING ADAPTER-LPT COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A2992G01 | LOOSENING ADAPTER - LPT COUPLING | 4 | |
856A3267 | TEST RIG ADAPTER - SUMP OIL TUBE | 1 | |
856A3267G02 | ADAPTER, TEST RIG - AIR FLOW CHECK | 9 | |
856A3328G01 | TOOL SET - ADAPTER #1/#2 BRG OIL NOZZLE AIR IMPINGMENT CHECK | 5 | |
856A3329G02 | TOOL SET - ADAPTER #1 /#2 AIR IMPINGMENT CHECK | 3 | |
856A3362G01 | PULLER ADAPTER - LUBE UNIT FILTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3419 | ADAPTER, PULLER - OIL INLET COVER AND MAJOR MODULE 3 (PULLER ADAPTER) | 2 | |
856A3419G02 | Adapter, Puller - Oil Inlet Cover and Major Module 3 (puller adapter) | 21 | |
856A3455G01 | BALANCING DRIVE ADAPTER - FWD LPT SH | 2 | |
856A3466 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3466G01 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | 5 | |
856A3468G01 | - ADAPTER, DRIVE - FWD LPT SHAFT BALANCING (OPTIONAL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3471 | ADAPTER-DRIVE SPLINES FUEL PUMP ROTATION CHECK | 1 | |
856A3471P01 | ADAPTER - DRIVE SPLINES FUEL PUMP ROTATION CHECK | 4 | |
856A3471P02 | ADAPTER-SPLINE FUEL | 11 | |
856A3499G01 | TORQUING/LOOSENING ADAPTER - N°1 BR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3500G01 | ADAPTER, PULLER-FAN BLADE SPACERS | 17 | |
856A3501G04 | LOOSENING ADAPTER - LPT COUPLING NUT | 13 | |
856A3509 | ADAPTER, LOCKING - CORE ENGINE (LOCKING ADAPTER) | 4 | |
856A3509 G01 | ADAPTER, LOCKING - CORE ENGINE WITH | 15 | |
856A3509G01 | ADAPTER, LOCKING - CORE ENGINE | 15 | |
856A3510 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3510 G02 | ADAPTER, LIFT AND TURN - 1 AND 2 BRG SUPPORT | 1 | |
856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3510G04 | LIFTING & TURNING ADAPTER - N°1/2 BRG | 6 | |
856A3515G04 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | 9 | |
856A3524 | TOOL SET, DRIVE ADAPTER - BOOSTER AND LPT (TOOL SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3524G01 | Tool set,drive adapter-booster and lpt | 14 | |
856A3544 | FLANGE, ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3544G01 | FLANGE ADAPTER -TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3544G02 | FLANGE, ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3544G03 | FLANGE ADAPTER - TGB | 6 | |
856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 5 | |
856A3557G01 | TOOL D-SEAL ADAPTER LUBE UNIT | 22 | |
856A3601 | ADAPTER - DRAIN LUB UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3601G01 | ADAPTER-DRAIN, LUBRICATION UNIT (CFM INTERNATIONAL INC. - GE SUPPORT SERVICES) | 10 | |
856A3601G01 | ADAPTER - DRAIN, LUBRICATION UNIT | 10 | |
856A3625 | ADAPTER-INNER SEAL,LUBRIC | 2 | |
856A3625G01 | ADAPTER - INNER SEAL | 11 | |
856A3627 | ADAPTER PRESSURE TEST-FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3627 REV A | ADAPTER PRESSURE TEST-FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3627G01 | ADAPTER PRESSURE TEST-FUEL MANIFOLD | 8 | |
856A3721 | ADAPTER TOOL SET - LIFT AND TURN 1 &2 BEARING SUPPORT (TOOL SET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3721G03 | ADAPTER TOOL SET - LIFT AND TURN 1 & 2 BEARING SUPPORT (TOOL SET) | 9 | |
856A3728G01 | SEALING PLATE AND LOCKING ADAPTER - CORE ENGINE (LOCKING ADAPTOR) | 12 | |
856A3728G02 | SEALING PLATE AND LOCKING ADAPTER - CORE | 14 | |
856A3810 | ADAPTER, AIR-DRY OUT | 1 | |
856A3810G01 | ADAPTER, AIR DRIVE - DRY OUT ENGINE SUMPS | 8 | |
856A3901G01 | ROTATION ADAPTER - CORE DRIVE PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A4095 | ADAPTER KIT. INSTALL / REMOVE SWAGED NUTS - CDP SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856AI006 | ADAPTER TORQUE-COMPR. STATOR NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
85J1028-001 | JACK ADAPTER-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8644425-10 | MUNTION LOADING ADAPTER ADU-53 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
871044-10 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
871044-28 | ADAPTER - LOAD TEST, PRESSURE RELIEF DOOR LATCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8765 | P-LEAD ADAPTER (EARLY S20) | 1 | |
8766 | MAGNETO P-LEAD ADAPTER (S200,S600, LATER S2,S4,S20) | 2 | |
8767 | P-LEAD ADAPTER (D2000, D3000) | 2 | |
8768 | P-LEAD ADAPTER (COMPLETE SET) | 2 | |
8600222 | INHIBITING ADAPTER FOR LP-FUEL PUMP | 1 | |
8600223 | INHIBITING ADAPTER FOR HP-FUEL | 1 | |
8600429 | TORQUE ADAPTER - PART NO. 8600429 | 5 | |
8807N-4 | CAP ADAPTER FOR IN-80A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
884EE | ADAPTER - PITOT-STATIC PROBE (PART# 884EE, SUP. 59885) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
884EE (SUP. 59885) | ADAPTER - PITOT-STATIC PROBE (PART# 884EE, SUP. 59885) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
884EH | ADAPTER - PITOT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
884EH-3 | ADAPTER - PROBE, PITOT-STATIC. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
884EHJ-3 | ADAPTER - PITOT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8998 | ADAPTER CABLE - HONEYWELL ZING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2013 | ADAPTER, GRIND - HP TURBINE ROTOR, FWD & AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2024 | ADAPTER, ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2042 | ADAPTER, DRIVE - BALANCE, HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2043 | ADAPTER, TORQUE - NO. 4 S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2107 | ADAPTER, SUPPORT - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2116 | ADAPTER, GRIND/BALANCE-HPCR, AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2134 | FIXTURE, ADAPTER - GENSPECT (AFT END DOWN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2160 | ADAPTER SET, INSTALL/REMOVE - FORWARD HPC STATOR CASES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2192 | ADAPTER, GENSPEC - HPCR, AFT BALANCE ARBOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2345 | ADAPTER, SUPPORT - K FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2637 | ADAPTER, INSTALL/REMOVE - FMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2638 | ADAPTER, INSTALL/REMOVE - AIR STARTER/MFP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2639 | ADAPTER, INSTALL/REMOVE - LUBE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2647 | ADAPTER, INSTALL/REMOVE - HX COMBO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2663 | ADAPTER LIFT - ENGINE AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2758 | ADAPTER, TORQUE - HPT AIR DUCT (LONG VERSION USED WITH RTR LOCK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2824 | ADAPTER, DISASSEMBLY - CDP JOINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2895 | FIXTURE, INSTALL - FUEL PUMP, MFF ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C2918 | ADAPTER, GUIDE - NO 2 BRG INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3407 | FIXTURE - LIFT - AGBX - ADAPTER FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3435 | ADAPTER - OIL SUPPLY - AGBX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3436 | ADAPTER - OIL SCAVENGE - AGBX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3463 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - IDLER - VSCF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3464 | ADAPTER - EXTRACTION - AGBX - BRG - ETS - HP - FP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3465 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - LP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3466 | ADAPTER - EXTRACTION - AGBX - BRG - IDG - ATS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3467 | ADAPTER - EXTRACTION - AGBX - BRG - PMA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3483 | STAND - TROLLEY - AGBX - ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3488 | SET - PROTECTION PLUGS - AGBX - ADAPTER FP MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3518 | ADAPTER - OIL SCAVENGE - TGBX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3519 | ADAPTER - OIL SUPPLY - TGBX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3523 | ADAPTER - OIL TEST - TGBX - NIPPLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3525 | ADAPTER - SHIM MEASUREMENT - TGBX - VERTICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3538 | ADAPTER - WRENCH - TGBX - LOCKNUT - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3552 | ADAPTER - BASE - SUPPORT - DYNAMOMETER - TGBX - VERTICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3556 | ADAPTER - CYLINDER - TGBX - IGBX - VERTICAL - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3618 | ADAPTER - OIL SUPPLY - IGBX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3628 | ADAPTER - WRENCH - IGBX - NUT - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3635 | ADAPTER - GUIDE - PUSHER HYDRAULIC - IGBX - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3637 | ADAPTER - WRENCH - IGBX - FIXTURE - LIFT - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3675 | ADAPTER - EXTRACTION - IGBX - OIL DISTRIBUTOR - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3676 | ADAPTER - EXTRACTION - IGBX - ROLLER BRG - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3677 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8C3678 | ADAPTER - EXTRACTION - IGBX - BALL BRG - HORIZONTAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
8MIT65B01221-4 | ADAPTER WRENCH - NUT, RESTRICTOR TUBE, NOSE LANDING GEAR | 1 | |
8MIT65B01231-1 | TORQUE ADAPTER -0 INNER | 1 | |
8TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
8XHBU-SS | ADAPTER - PRESSURE (1/2-INCH FLARELESS FITTING AT ONE END AND 1/2-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) (COM-14304) | 4 | |
90-60 | ADAPTER-OBJECTIVE FOR ENDOSCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
902-10034 | CABLE ADAPTER 7310/ATR-42 | 3 | |
902-10390-1 | ADAPTER CABLE - HONEYWELL ZING | 1 | |
902249-1 | ADAPTER A 902249-1 (USED IN ALTERNATE TEST) | 1 | |
9045001 | COMPARATOR - BETA LIGHT : PN 9045001 / MAVOLUX 5032B USB (LUMINANCE ATTACHMENT P/N M516G AND ADAPTER DISK P/N M499G MUST BE USED WITH THE LUXMETER) OR MAVO-MONITOR USB. | 11 | |
907968-1-1 | ADAPTER-INDICATOR TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
90MIT65B00112 | ADAPTER ASSEMBLY - JACKING INBOARD WING, BBL 566.5 | 2 | |
9142702600 | WRENCH ADAPTER - RING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9171K167 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
9171K168 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
9171K169 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
9171K173 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/8 B-BSPT MAX PSI;2600 | 1 | |
9171K174 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-1/2 B-BSPT MAX PSI;2400 | 1 | |
9171K175 | FEMALE X MALE ADAPTER - BSPT PIPE SIZE;A-3/4 B-BSPT MAX PSI;2300 | 1 | |
9171K232 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/8 MAX PSI;3500 | 1 | |
9171K233 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/4 B-1/2 MAX PSI;3000 | 1 | |
9171K64 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-1/4 MAX PSI;3500 | 1 | |
9171K65 | FEMALE X MALE ADAPTER PIPE SIZE;A-3/8 B-3/8 MAX PSI;3500 | 1 | |
9171K66 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/4 MAX PSI;3600 | 1 | |
9171K67 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-3/8 MAX PSI;3600 | 1 | |
9171K68 | FEMALE X MALE ADAPTER PIPE SIZE;A-1/2 B-1/2 MAX PSI;3600 | 1 | |
932-200 | ADAPTER-LIFTING ENGINE SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9400M83 | ADAPTER KIT - HYDRAULIC LUBE SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9400M83G01 | ADAPTER KIT - HYDRAULIC LUBE SYSTEM | 1 | |
9400M86G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9400M96 | ADAPTERS & SONIC NOZZLES - TEST STAND FLOW - FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9400M96G01 | ADAPTERS, TEST STAND - FLOW FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9404M32 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9404M32P01 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M11 | ADAPTER ASSY. SUPPORT- HP COMPR./CDN FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M11 REV NC | ADAPTER ASSY. SUPPORT- HP COMPR./CDN FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M27 | ADAPTER SET, SUPPORT-BOOSTER, AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M27 REV NC | ADAPTER SET, SUPPORT-BOOSTER, AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M31 | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9426M31 REV NC | ADAPTER SET, SUPPORT-CORE ENGINE-FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9429M25 | PLATE - TORQUE ADAPTER-INSTALL/REMOVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9429M63 | ADAPTER SET, FLOW CHECK-FRAMES, LUBE SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9429M71 | ADAPTER SET, FLOW CHECK - FRAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
945193GSE1 | ADAPTER - BYPASS, HHX VALVE | 1 | |
9455M19 | ADAPTER - GRIND-HP COMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9456M92 | SEAL - ADAPTER-ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M47 | ADAPTER - OFFSET - CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M47G01 | ADAPTER, OFFSET - CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M47P01 | ADAPTER-OFFSET CRANK PAD | 2 | |
9471M47P02 | ADAPTER, OFFSET - CRANK PAD | 2 | |
9471M48 | ADAPTER, TURN - CORE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9471M48P01 | ADAPTER, TURN-CORE (MANUAL DRIVE PAD) | 5 | |
9481M78 | ADAPTER - BRACKET-STANDARD ROLLOVER STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1056 | ADAPTER - TORQUE - NO. 4 SPANNER NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1090 | ADAPTER - ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1144 | ADAPTER - GRIND HPCR - AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1147 | ADAPTER - HOIST - GENERAL PURPOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1173 | ADAPTER - VSV RIGGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1176 | TOOL KIT - ADAPTER - ELECTRONIC PROTRACTOR VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1185 | FIXTURE - ASSY ADAPTER - GENSPEC HPCR/HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1201 | ADAPTER SET - GUIDE - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1202 | ADAPTER - ROLL OVER STAND - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1209 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
956A1209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
956A1209G02 | ADAPTER SET, MANIFOLD PRESSURE CHECK- FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1245 | ADAPTER - STRONGBACK - CORE BUILD STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1259 | ADAPTER - GUIDE - HPC FWD SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1283 | ADAPTER, ROLL OVER STAND - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1320 | BRACKET SET - ADAPTER - TRF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1607 | ADAPTER - VSV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1607G01 | ADAPTER - VSV PNEUMATIC | 6 | |
956A1607G02 | ADAPTER-VSV-ASSEMBLY | 5 | |
956A1608 | ADAPTER - REMOVAL/INSTALLATION - FUEL PUMP | 2 | |
956A1608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP | 4 | |
956A1610P01 | DRIVEÂ ADAPTERÂ -Â COREÂ ENGINEÂ ROTATION | 2 | |
956A1613 | ADAPTER - FMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1613G01 | ADAPTER - SUPPORT | 5 | |
956A1614 | ADAPTER - SCU/SVA | 1 | |
956A1614G01 | ADAPTER - SUPPORT | 5 | |
956A1616 | ADAPTER, INSTALL/REMOVE - EEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1616G01 | ADAPTER, INSTALL/REMOVE- FADEC | 2 | |
956A1627G01 | BSI ADAPTER KIT, LEAP-1A/1B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1634G01 | ADAPTER, PROGRAMMING CABLE - HJ9B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A1720 | ADAPTER SET - LIFT - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3056 | ADAPTER - TORQUE - NO 4 SPANNER NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3114 | FIXTURE - TORQUE ADAPTER TO INSTALL/REMOVE TUBE IMPELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3124 | ADAPTER - BALANCE/GRIND - AFT HPC ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3144 | ADAPTER - GRIND - HPCR - AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3201 | ADAPTER SET - GUIDE - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3202 | ADAPTER - ROLLOVER STAND - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3209 | ADAPTER SET - MANIFOLD PRESSURE CHECK - FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3209G01 | ADAPTER SET, MANIFOLD PRESSURE CHECK - FUEL | 1 | |
956A3209G02 | ADAPTER SET - MANIFOLD PRESSURE CHECK | 1 | |
956A3240 | ADAPTER SET - COMPRESSOR STATOR - DUMMY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3250 | ADAPTER - TORQUE - HPT FLANGE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3259 | ADAPTER - GUIDE - HIGH PRESSURE COMPRESSOR FORWARD SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3608 | ADAPTER - FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3608G01 | ADAPTER-MAIN FUEL PUMP | 3 | |
956A3616 | ADAPTER - INSTALL/REMOVE - FADEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A3616G01 | ADAPTER - INSTALLATION/REMOVAL, FADEC | 4 | |
956A6000 | ADAPTER - PLATE AND SPHERICAL JOINT - FAN MODULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6016G01 | Adapter-Install/Remove FADEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6046 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 2 | |
956A6046G01 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN | 2 | |
956A6046G02 | ADAPTER , PLATE AND SPHERICAL JOINT - FAN MODULE | 4 | |
956A6046G03 | ADAPTER - PLATE AND SPHERICAL JOINT - FAN MODULE | 4 | |
956A6078 | KIT - BLANK OFF & ADAPTER - SHROUD FAN FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6207 | FLANGE ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6210 | FLANGE ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6241 | DRIVE SPLINE ADAPTER - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6250 | FLANGE ADAPTER - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6257 | FLANGE ADAPTER - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6288 | DRIVE SPLINE ADAPTER - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6558 | ADAPTER - LPT REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A6674 | SLIDE HAMMER & ADAPTER-TGB TRANSFER SHAFT | 2 | |
956A6674G01 | SLIDE HAMMER&ADAPTER-TGB TRANSFER | 2 | |
956A6674G02 | SLIDE HAMMER & ADAPTER - TGB TRANSFERT SHAFT | 4 | |
956A7104 | KIT - BLANK OFF & ADAPTER-SHROUD FAN FRAME KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7314 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7610 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7613 | ADAPTER, LOCK - CORE ENGINE | 2 | |
956A7613G02 | ADAPTER, LOCK -CORE ENGINE (FOR PMA) | 5 | |
956A7615 | ADAPTER - REMOVE/INSTALL - OIL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7615G02 | ADAPTER, REMOVE/INSTALL - OIL TANK | 3 | |
956A7618G01 | ADAPTER - LUBE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7644G03 | TOOLS (INCLUDING ADAPTERS 956A6046G02 AND 956A7314G03) FOR ENGINE CFM LEAP-1A | 3 | |
956A7644P39 | ADAPTER- FWD LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7644P52 | Adapter- FWD rh | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7651 | KIT - SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A7651G02 | KIT, SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLYSLIDE HAMMER AND ADAPTER TOOL (LEAP) | 4 | |
956A8018G01 | ADAPTER, PLATE AND SPHERICAL JOINT – FAN MODULE. NOTE: NEEDED FOR ENGINE POST SB 72-0181 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8018G02 | LEFT SIDE AND RIGHT-SIDE ADAPTERS, | 2 | |
956A8018P18 | LEFT SIDE AND RIGHT-SIDE ADAPTERS, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8018P19 | LEFT SIDE AND RIGHT-SIDE ADAPTERS, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8674 | ADAPTER - DRAIN - OIL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8674G02 | ADAPTER, DRAIN - OIL SYSTEM RECOMMENDED 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8674G03 | ADAPTER, DRAIN - OIL SYSTEM | 1 | |
956A8679 | ADAPTER - LOCK - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8679G01 | ADAPTER, LOCK - CORE ENGINE | 3 | |
956A8902 | ADAPTER - REMOVE/INSTALL - TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8931 | ADAPTER - DRIVE SPLINES - GEAR - TGB/AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8931G01 | Adapter,drive splines-gear,TGB/AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8935 | ADAPTER - FLOW CHECK - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
956A8940 | ADAPTER - FLOW CHECK - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97A21102055000 | ADAPTER-APU BLEED AIR SYSTEM | 1 | |
97A28002063000 | BLANK ADAPTER-WING CENTER BOX VENTILATION.SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97A28002156000 | ADAPTER ASSEMBLY-WING CENTER BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97A28002200000 | ADAPTER-DRAINAGE SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97A28002202000 | ADAPTER - ECOLOGICAL DRAINING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97A28002534000 | ADAPTER-VENTING, VAPOR SEAL | 5 | |
97A28002542000 | ADAPTER - DRAIN MAST | 5 | |
97A28002549000 | ADAPTER - TRIM TANK FEED THRU TEST | 4 | |
97A76102003000 | ADAPTER-SPRING SCALE,THROTTLE CONTROL LEVER | 8 | |
97A76102008000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
97F28001007000 | ADAPTER-DOUBLE WALL ENGINE PYLON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
980-101-000-011 | CABLE - ADAPTER, ADVANCED AIRBORNE VIBRATION MONITOR | 2 | |
980N-1 | ASI-203 ALTIMETER TEST SET WITH CABLE ADAPTER | 8 | |
983-4195-140 | SUB-LEVEL ADAPTER ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9898AMS172349003 | ADAPTER-WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A070030907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A07003906 | ADAPTER-LOAD CELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A07003906200 | ADAPTER-FOR LOADCELL | 13 | |
98A07003906200-REVC | ADAPTER-FOR LOADCELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A07003906202 | ADAPTER-LOAD CELL | 1 | |
98A07003907 | ADAPTER-LOAD CELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A07003907200 | ADAPTER-FOR LOADCELL | 14 | |
98A07003907206 | ADAPTER JACK - SAFETY JACKING // TAIL JACK P/N:HS | 4 | |
98A07003911200 | ADAPTER-LOAD CELL | 11 | |
98A10108300000 | ADAPTER-HEATING,APU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A12003003000 | ADAPTER-AIR EVACUATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A12003009000 | ADAPTER - GROUND CONNECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A21001502000 | PROTECTIVE PLATE-ADAPTER | 3 | |
98A27407514200 | ADAPTER, A330-200, COMPLETE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27407518000 | ADAPTER MINI-HOIST ATACHMENT | 2 | |
98A27407565000 | ADAPTER - MANUAL MOVEMENT, T.H | 2 | |
98A27408322200 | HOOK WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27408322202 | HOOK WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27408322204 | HOOK WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27408322206 | HOOK WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27508061000 | ADAPTER-FLAP DRIVE SHAFT WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A27508062000 | ADAPTER-FLAP DRIVE SHAFT WING | 2 | |
98A27804001000 | ADAPTER-TORQUE TEST | 3 | |
98A27808003000 | Adapter fuer torque shaft drive tool-24 teeth | 3 | |
98A27808003001 | Adapter fuer torque shaft drive tool-24 teeth | 14 | |
98A28002534000 | ADAPTER-VENTING, VAPOR SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A2800757000 | ADAPTER - VENT AND DRAIN VALVE, APU/ APU | 4 | |
98A28007570000 | ADAPTER-VENT AND DRAIN VALVE APU | 36 | |
98A28101000000 | ADAPTER PIPE- WATER DRAINING FROM FUEL | 24 | |
98A28104030000 | ADAPTER-BANJO | 10 | |
98A28108001000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 6 | |
98A28108465000 | ADAPTER - WATER DRAIN | 5 | |
98A29001010000 | ADAPTER-HYDRAULIC TANK TOPPING UP UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A32103003000 | ADAPTER-TORQUE | 7 | |
98A35207599 | HOSE-ADAPTER,ALTITUDE SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A35207599000 | ADAPTER-HOSE, ALTITUDE SWITCH | 25 | |
98A38308235000 | ADAPTER - ALTITUDE PRESSURE SWI | 2 | |
98A38308456000 | ADAPTER-ALTITUDE PRESSURE SWITCH | 1 | |
98A54403007000 | ADAPTER-PYLON-TO-DYNAMOMETRIC CELL | 1 | |
98A54403024000 | ADAPTER - DYNAMOMETRIC | 7 | |
98A54403024001 | ADAPTER-DYNAMOMETRIC AT RIB 1 FOR NDT | 4 | |
98A54403024002 | ADAPTER - DYNAMOMETRIC | 4 | |
98A54403024003 | ADAPTER-DYNAMOMETRIC AT RIB 1 FOR NDT | 9 | |
98A55308595000 | ADAPTER - SUPPORT, RUDDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A57104004000 | ADAPTER-TORQUE WRENCH | 6 | |
98A76103003000 | ADAPTER - SPRING SCALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98A76103004000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 5 | |
98AMS172321000 | ADAPTER - WRENCH | 8 | |
98AMS172321002 | ADAPTER-WRENCH,HOOK TYPE | 11 | |
98AMS172321003 | ADAPTER - WRENCH, SO | 12 | |
98AMS172322002 | WRENCH - ADAPTER | 7 | |
98AMS172322003 | ADAPTER - WRENCH, SOCKET TYPE | 7 | |
98AMS172322004 | WRENCH - ADAPTER | 2 | |
98AMS172322005 | WRENCH-ADAPTER | 9 | |
98AMS172323000 | HOOK WRENCH - ADAPTER | 1 | |
98AMS172323002 | ADAPTER-WRENCH | 8 | |
98AMS172323003 | ADAPTER - WRENCH, SOCKET TYPE | 4 | |
98AMS172324002 | ADAPTER-WRENCH | 3 | |
98AMS172324003 | WRENCH - ADAPTER | 4 | |
98AMS172325002 | ADAPTER - WRENCH, HOOK TYPE | 4 | |
98AMS172325003 | ADAPTER-WRENCH | 3 | |
98AMS172326002 | WRENCH - ADAPTER | 4 | |
98AMS172326003 | ADAPTER-WRENCH | 5 | |
98AMS172327 | HOOK WRENCH- ADAPTER | 1 | |
98AMS172327-003 | WRENCH-ADAPTER | 8 | |
98AMS172327-02 | Hook wrench-adapter | 1 | |
98AMS172327000 | WRENCH-ADAPTER | 2 | |
98AMS172327002 | WRENCH WRENCH-ADAPTER | 12 | |
98AMS172327003 | WRENCH-ADAPTER | 8 | |
98AMS172328002 | ADAPTER-WRENCH | 2 | |
98AMS172328003 | WRENCH-ADAPTER (A/C A340) | 7 | |
98AMS172329000 | HOOK WRENCH - ADAPTER | 1 | |
98AMS172329002 | WRENCH - ADAPTER | 8 | |
98AMS172329003 | ADAPTER-WRENCH | 7 | |
98AMS172330002 | ADAPTER-WRENCH | 3 | |
98AMS172330003 | WRENCH - ADAPTER | 6 | |
98AMS172331002 | ADAPTER-WRENCH | 3 | |
98AMS172331003 | ADAPTER-WRENCH | 4 | |
98AMS172332002 | ADAPTER - WRENCH, HOOK TYPE | 7 | |
98AMS172332003 | ADAPTER-WRENCH | 6 | |
98AMS172332004 | WRENCH - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172332005 | WRENCH - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172333 | HOOK WRENCH- ADAPTER | 1 | |
98AMS172333000 | HOOK WRENCH - ADAPTER | 2 | |
98AMS172333002 | ADAPTER - WRENCH, HOOK TY | 11 | |
98AMS172333003 | ADAPTER-WRENCH | 9 | |
98AMS172334002 | ADAPTER-WRENCH | 5 | |
98AMS172334003 | ADAPTER-WRENCH | 4 | |
98AMS172335 | ADAPTER-WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172335001 | HOOK WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172335002 | ADAPTER-WRENCH | 8 | |
98AMS172335002 | ADAPTER-WRENCH | 8 | |
98AMS172335003 | ADAPTER-WRENCH | 9 | |
98AMS172336002 | WRENCH - ADAPTER | 4 | |
98AMS172336003 | ADAPTER - WRENCH, SOCKET TYPE | 3 | |
98AMS172337 | ADAPTER-WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172337002 | WRENCH - ADAPTER | 9 | |
98AMS172337003 | WRENCH - ADAPTER | 8 | |
98AMS172339002 | Wrench-adapter for MS172339 | 3 | |
98AMS172339003 | WRENCH-ADAPTER | 3 | |
98AMS172341000 | WRENCH-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98AMS172341002 | WRENCH-ADAPTER | 11 | |
98AMS172341003 | WRENCH-ADAPTER | 8 | |
98AMS172343002 | Wrench-adapter for MS172343 | 2 | |
98AMS172343003 | WRENCH-ADAPTER | 2 | |
98AMS172344000 | HOOK WRENCH - ADAPTER | 1 | |
98AMS172344002 | WRENCH - ADAPTER | 9 | |
98AMS172344003 | ADAPTER - WRENCH, SOCKET TYPE | 5 | |
98AMS172345002 | HOOK WRENCH-ADAPTER | 4 | |
98AMS172345003 | HOOK WRENCG- ADAPTER | 4 | |
98AMS172348002 | Hook wrench-adapter | 4 | |
98AMS172348003 | ADAPTER - WRENCH, SOCKET TYPE | 4 | |
98AMS172349000 | WRENCH-ADAPTER FOR MS172349 SCHLUESSELADAPTER FUER MS172349 | 1 | |
98AMS172349002 | WRENCH-ADAPTER | 9 | |
98AMS172349003 | WRENCH - ADAPTER | 7 | |
98AMS1723ALL | ADAPTER - HOOK WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98C-111-N | ADAPTER - FIBER OPTIC, LC-LC CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D07103500000 | JACK ADAPTER-FUSELAGE | 31 | |
98D07203006000 | ADAPTER-JACKING FR.8 | 1 | |
98D07203015000 | JACK ADAPTER - PYLON | 5 | |
98D27504035000 | ADAPTER-TORQUE-TRUNNION NUT | 20 | |
98D27804001000 | ADAPTER-DRIVE, SLAT (AND FLAP) | 28 | |
98D28108293000 | ADAPTER-WATER DRAIN, ACT | 19 | |
98D28108293001 | ADAPTER-WATER DRAIN,ADDITIONAL | 7 | |
98D281082930011 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D28108293002 | ADAPTER-WATER DRAIN, ADDITIONA | 11 | |
98D28108559000 | ADAPTER, TUBE - DRAIN VALVE, AC | 8 | |
98D28108560000 | ADAPTER - TUBE, WATER DRAIN | 6 | |
98D28108560040-200 | ADAPTER - TUBE, WATER DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D28108560202 | ADAPTER - TUBE, WATER DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D28108562000 | ADAPTER, PRESSURE DRAIN-ACT | 10 | |
98D29003502009 | ITEM 9 ADAPTER - TMHDI1611 | 1 | |
98D323030000 | ADAPTER-WRENCH KIT | 1 | |
98D32303000000 | ADAPTER-WRENCH | 26 | |
98D32303000200 | ADAPTER-WRENCH NUT MS172331 | 3 | |
98D32303000201 | ADAPTER-WRENCH | 9 | |
98D32303000202 | ADAPTER-WRENCH NUT MS172333 | 2 | |
98D32403001000 | adapter - brake unit nut | 19 | |
98D32403005000 | ADAPTER- BRAKE UNIT | 19 | |
98D324030050000 | ADAPTER- BRAKE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D32403005001 | ADAPTER- BRAKE UNIT | 22 | |
98D34003500000 | ADAPTER COVER - STATIC PORT | 30 | |
98D34003500000-102 | ADAPTER/COVER-STATIC PORT | 2 | |
98D34003500100 | ADAPTER/COVER-STATIC PORT | 7 | |
98D34003500102 | ADAPTER COVER-STATIC PORT | 5 | |
98D34003500103 | ADAPTER COVER - STATIC PORT | 8 | |
98D34103000000 | ADAPTER-COVER STATIC PROBE | 12 | |
98D34103002000 | ADAPTERS-AIR DATA SYSTEM FLUSHING | 31 | |
98D34103002000 | ADAPTERS - AIR DATA SYSTEM FLUSHING | 31 | |
98D34103002100 | 3-PIN ADAPTER | 13 | |
98D34103002102 | AIR DATA SYSTEM FLUSHING 2-PIN ADAPTER | 11 | |
98D34103003000 | ADAPTERS - AIR DATA SYSTEM FLUSHING | 21 | |
98D36109004000 | ADAPTER KIT - BLEED TEST SET | 5 | |
98D38308234001 | ADAPTER - ALTITUDE PRESSURE SWITCH | 13 | |
98D4920900100 | ADAPTER - VENT AND DRAIN VALVE, APU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D49209002000 | ADAPTER - VENT AND DRAIN VALVE, APU | 3 | |
98D49209002001 | ADAPTER - VENT AND DRAIN VALVE, APU | 3 | |
98D54503001000 | WRENCH HOOK - ADAPTER | 9 | |
98D55109001000 | Adapter-Water Drain- issC | 8 | |
98D55109002000 | Adapter-Water Drain- Iss A | 7 | |
98D55109010200 | ADAPTER-UPPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D55109010202 | ADAPTER-LOWER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D57508791000 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D71203006234 | ADAPTER FOR LEFT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
98D71203006235 | ADAPTER FOR RIGHT FWD TORQUE WRENCH FOR PW6000 ENGINE R-I | 1 | |
98D71203022000 | ADAPTER - TROLLEY R/I IDG (PW AND CFM) | 11 | |
98D71203022001 | ADAPTER-TROLLEY R/I IDG (PW AND CFM) | 4 | |
98DAMS172321002 | ADAPTER-WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98DAMS172321002 | ADAPTER - WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F070108635000 | ADAPTER-AFT,JACKING | 1 | |
98F07101003000 | ADAPTER-JACK NOSE | 4 | |
98F07103500001 | ADAPTER, JACK - NOSE | 19 | |
98F07107501000 | ADAPTER-AFT JACKING | 17 | |
98F07108635000 | ADAPTER - AFT JACKING | 13 | |
98F12108458000 | ADAPTER - FILLING, GEARBOX | 6 | |
98F27508121000 | WRENCH - ADAPTER, TRUNNION | 1 | |
98F27508121001 | WRENCH - ADAPTER, TRUNNION | 1 | |
98F27508233001 | WRENCH-ADAPTER | 2 | |
98F27508233002 | WRENCH-ADAPTER | 1 | |
98F27508278000 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT | 2 | |
98F27508278002 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 4 | |
98F27508278003 | ADAPTER ADAPTER SET -0 OPTICAL ALIGNMENT | 2 | |
98F27508278004 | ADAPTER - ADJUSTMENT, FLAPS | 2 | |
98F27508302000 | Messadapter gage-tape extflap | 9 | |
98F27508726000 | WRENCH - ADAPTER, TRUNNION | 1 | |
98F27508726001 | WRENCH - ADAPTER, TRUNNION | 1 | |
98F32104000040 | ADAPTER ASSY-AFT EXTN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F32104000046 | ADAPTER ASSY,AFT-EXTRN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F32104000048 | ADAPTER ASSY,AFT-INSN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F32204002000 | ADAPTER-HANDLING TROLLEY,CLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F32304000000 | ADAPTER-PITOT PROBE | 36 | |
98F34103000000 | ADAPTER COVER-STATIC PROBE | 16 | |
98F34103000001 | ADAPTER-COVER STATIC PROBE | 6 | |
98F34103001000 | ADAPTER-PITOT PROBE | 15 | |
98F34103004000 | ADAPTER-PITOT PROBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240000 | ADAPTER - TORQUE (SQUARE DRIVE | 9 | |
98F49208240001 | ADAPTER - TORQUE (SQUARE | 11 | |
98F49208240200 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240202 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240208 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49208240210 | ADAPTER(DREHMOMENT)ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F49209001000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX | 5 | |
98F54003008000 | ADAPTER-DYNAMOMETRIC CELL R1 (NDT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98F54003008001 | ADAPTER - DYNAMOMETRIC AT RIB1 | 1 | |
98F54003008002 | ADAPTER ADAPTER -0 DYNAMOMETRIC AT RIB 1 | 3 | |
98F54003008003 | ADAPTER-DYNAMOMETRIC CELL R1 (NDT) | 6 | |
98F57508702000 | ADAPTER-WRENCH,INBOARD FLAP | 3 | |
98F57508702001 | ADAPTER-WRENCH,INBOARD FLAP | 3 | |
98F57508702001 | ADAPTER-WRENCH,INBOARD FLAP | 3 | |
98F57508703000 | ADAPTER-WRENCH | 4 | |
98F57508703001 | ADAPTER-WRENCH | 7 | |
98F57508703001 | ADAPTER-WRENCH | 7 | |
98F57508736000 | WRENCH-HOOK,ADAPTER | 5 | |
98F57508736001 | WRENCH-ADAPTER | 4 | |
98F57508737000 | WRENCH-ADAPTER | 1 | |
98F57508737001 | WRENCH-ADAPTER | 1 | |
98F71201001104 | Adapter,GSE - RRT700 AFT | 5 | |
98F71203503000 | Adapter- BS/cradle, A340 | 6 | |
98L07008510000 | ADAPTER-SUPPORT, AFT JACKING | 1 | |
98L07008510001 | ADAPTER-SUPPORT | 4 | |
98L07008510202 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L07008510204 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L07008510206 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L07008510208 | ADAPT-SUPP.AFT JACK ADAPTER FUER HINTERE STUETZE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L07101000000 | ADAPTER - JACK NOSE | 4 | |
98L07203003000 | ADAPTER-LOAD CELL | 2 | |
98L07209001000 | ADAPTER - SHORING THS | 2 | |
98L24209005000 | ADAPTER - TORQUE (SQUARE DRIVE 3-8, HEX SIZE 7-16 IN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L27208453000 | ADAPTER, TURN BARREL - RUDDER | 3 | |
98L27209010000 | ADAPTER TURN BARREL-LOWER RUDDER | 3 | |
98L27209010200 | ADAPTER T.B.-LOW RUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L27209010202 | ADAPTER T.B.-LOW RUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L27209010204 | ADAPTER T.B.-LOW RUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L27209011000 | ADAPTER, LIFTING - UPPER AND LO | 2 | |
98L27209015000 | ADAPTER-TURN BARREL,UPPER RUDDER | 4 | |
98L27309008000 | ADAPTER KIT-EHA OR SERVOCONTROL | 4 | |
98L27503000000 | ADAPTER-FLAP PCU | 4 | |
98L27803000000 | ADAPTER-SLAT PCU | 4 | |
98L28004033000 | ADAPTER ASSY-BLD/INFL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L29203001000 | ADAPTER-FORWARD LEGHS | 1 | |
98L29203002000 | ADAPTER-AFTWARD LEGHS | 2 | |
98L34203500000 | ADAPTER,COVER STATIC PROBE-STAND BY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98L36103002044 | ADAPTER M-M7/16 | 3 | |
98L36103002064 | ADAPTER M7/16-M3/8 | 2 | |
98L55308525000 | ADAPTER, SUPPORT STAND - RUDDER | 1 | |
98L57508757000 | Wrench-adapter | 1 | |
98L57508757001 | Wrench-adapter | 2 | |
98L57508758000 | Wrench-adapter | 1 | |
98L57508758001 | Wrench-adapter | 1 | |
98L57508759000 | Wrench-adapter | 1 | |
98L57508759001 | Wrench-adapter | 2 | |
98L57508760000 | Wrench-adapter | 1 | |
98L57508760001 | Wrench-adapter | 2 | |
98NSA506306000 | WRENCH-HOOK ADAPTER | 5 | |
98NSA506307000 | Hook wrench-adapter | 4 | |
98NSA506308000 | WRENCH-HOOK ADAPTER | 3 | |
98NSA506310000 | Hook wrench-adapter | 5 | |
98NSA506312000 | WRENCH-HOOK,ADAPTER | 5 | |
98NSA506314000 | Hook wrench-adapter | 5 | |
98NSA506316000 | WRENCH-HOOK,ADAPTER | 5 | |
98NSA506320000 | Hook wrench-adapter | 4 | |
98NSA506324000 | WRENCH-HOOK,ADAPTER | 4 | |
98NSA5063ALL | ADAPTER - HOOK WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98S07003000001 | ADAPTER-JACK,WING AFT FUSELAGE | 16 | |
98S07008010000 | ADAPTER-JACK FWD FUSELAGE | 19 | |
98S07008010000 | ADAPTER-JACK,FWD FUSELAGE | 19 | |
98S27003002000 | ADAPTER-MANUAL DRIVE,TRIM ACTR | 10 | |
98S28005002000 | ADAPTER CABLE - FCU | 2 | |
98S32008125000 | ADAPTER-PARKING BRAKE | 4 | |
98S57003029000 | ADAPTER-LOAD RELIEF(COMPLETE SET) | 7 | |
98S57003029040 | ADAPTER- LOAD RELIEF (LH) | 4 | |
98S57003029041 | ADAPTER-LOAD RELIEF RH | 4 | |
98S57003030000 | ADAPTER- LOAD RELIEF | 5 | |
98S61005002000 | ADAPTER-TORQUE WRENCH | 5 | |
98V07104003000 | ADAPTER-WING JACKING | 5 | |
98V07109001000 | ADAPTER - AFT JACKING | 4 | |
98V21308764000 | ADAPTER-TEST,ORVD | 2 | |
98V25508833000 | ADAPTER-CCRC ASSEMBLY | 1 | |
98V36109001000 | Adapter kit-bleed | 4 | |
98a27208514040 | ADAPTER FOR METALL-RUDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98a27208514042 | ADAPTER FOR CFK-RUDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98a28108001000 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER TANK | 6 | |
98a28108001100 | ADAPTER-WATER DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-2645 | NOSE ADAPTER - HUCK | 6 | |
99-791-509 | ADAPTER CABLE-ANTI SKID TEST | 1 | |
99-791-511 | ADAPTER - ANTISKID TEST SET CABLE | 2 | |
99-791-563 | ANTI-SKID ADAPTER CABLE (560-0260 THRU 0538) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99-791-571 | ADAPTER CABLE ASSEMBLY -- ANTI-SKID | 1 | |
99-8057-6000 | KIT-PITOT STATIC TEST ADAPTER | 8 | |
99-8088-9000 | KIT-NOSE AND MAIN WHEEL MEASURING ADAPTER | 2 | |
99-8107-6000 | ADAPTER-RIGHT ANGLE DRIVE | 5 | |
99046 | 724-PSEU - ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 1 | |
99127-281 | BLEED ADAPTER KIT (LEAP-1 A) | 2 | |
994202 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
994204 | 3/8 ROUND DOUBLE-SQUARE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
997-71-572 | ANTI-SKID ADAPTER CABLE (560-00539 THRU 5000) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9970-957-145 | FLANGE, ADAPTER - LUBRICATION UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9970-957-195 | FLANGE, ADAPTER - LUBRICATION UNIT | 1 | |
9970-957-199 | ADAPTER, PULLER - COVER, PUMP ASSY | 1 | |
9970-957-526 | "TOOL SET - LEAK TEST, ADAPTER TEST LUBRICATION UNIT" | 1 | |
999-111 | Adapter - Fiber Optic, LC-LC Connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99A00505 | ADAPTER WRENCH -0 SUMP DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99A28404000000 | ADAPTER-SEQUENCE VALVE | 10 | |
99A34103001000 | ADAPTER-CHARGING , STATIC PORT | 7 | |
99A34103002000 | COVER ADAPTER-BLANKING CHARGING,STATIC PORT | 7 | |
99D46209001000 | ADAPTER-COAX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99L44508762000 | ADAPTER-CVMS,ACCESS | 1 | |
99L44508762001 | ADAPTER-CVMS, ACCESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99V44508001000 | ADAPTER-ACCESS CVMS | 1 | |
9BD28108293001 | ADAPTER-WATER DRAIN, ADDITIONAL CENTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1018 | ADAPTER - MANIFOLD PRES. CHK. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1194 | ADAPTER - LOCKING-AGB/TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1204 | ADAPTER - JACK STAND-IDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1204801 | ADAPTER - JACKSTAND, 8E90 108 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1204G01 | ADAPTER-JACK STAND-IDG | 4 | |
9C1261 | ADAPTER, GE90-115B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1378 | ADAPTER SET - LIFT - AFT ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1393 | ADAPTER SET HYR-VSS & ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1393G01 | Adapter Set, Hydraulic - VSV And VBV Actuator | 1 | |
9C1455 | ADAPTER SET-LIFT AND TURN PROPULSOR, AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1457 | ADAPTER SET, INSTALL/REMOVE-TRIM BALANCE CLIP, STG 6 LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1569G03 | HANDLING ADAPTER MASTER - HPTR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C1700G02 | WRENCH - ADAPTER (BAKER HUGHES) | 2 | |
9C2115 | ADAPTER - WRENCH (ADVANCE) (ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2122 | ADAPTER - WRENCH (ADVANCE) (ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2122G03 | TORQUING/LOOSENING WRENCH ADAPTER - NUT SEAL ROTATING AIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2126G01 | ADAPTER RING SPOOL 7-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2155G01 | EXPANSIBLE CHUCK ADAPTER - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2158G02 | HANDLING ADAPTER - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2161 | ADAPTER RING - SPOOL STAGES 7-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2161G01 | ADAPTER RING - SPOOL STG 7-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2231 | ADAPTER RING SPOOL 2-5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2231G01 | ADAPTER RING - HPCR SPOOL STG 2/5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2232G01 | ADAPTER RING STAGE 2-5 SPOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2233G01 | ADAPTER RING STAGE 7-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2251G04 | ADAPTER BALANCING - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2262G01 | HANDLING ADAPTER - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2277G02 | LIFTING & TURNING ADAPTER - HPCR BLISK STG 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2281G01 | RING ADAPTER - HPCR BLISK 1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2285G01 | ADAPTER RING - SPOOL STG 7/9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2339 | WRENCH ADAPTER - NO 3 BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2389G01 | RING ADAPTER - HPCR SPOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C3138 | ADAPTER, KIT-TUBE EXTENSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C3403G01 | ADAPTER, INSTALL/REMOVAL - LINE REPLACEABLE UNITS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C3407 | ADAPTER - VACUUM - C- SUMP AOS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C6018 | ADAPTER, LIFT-ENGINE, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C6018G01 | IF ENGINE WITHOUT MOUNTS - FWD ADAPTER | 1 | |
9C6022G01 | Adapter, Lift - Aft Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9PTK | MD80/MD90/DC-9 PITOT STATIC ADAPTER KIT | 1 | |
A-77.02.1 | ROTATING PROBE ADAPTER (CONNECTOR OF 4 PIN FISHER - 1 END MALE, 1 END FEMALE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A-C148659-1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
A-C148659-113 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
A034017-24 | TEST ADAPTER KIT-PITOT STATIC CONTINUITY LEAK AND FLUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A07001-1 | Jack Adapter-Forward Body | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A07001-11 | ACK ADAPTER - FORWARD BODY | 15 | |
A07001-11 | ACK ADAPTER - FORWARD BODY | 15 | |
A07003-1 | Jack Adapter -Outboard Wing | 14 | |
A07005-1 | Hoist Adapter -Airplane Recovery | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A07005-2 | HOIST ADAPTER - AIRPLANE RECOVERY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A12005-1 | LUBRICATION ADAPTER - ATTACH FITTING, WING/NACELLE | 10 | |
A12007-11 | ADAPTER - TIRE INFLATION | 4 | |
A12007-12 | ADAPTER - TIRE INFLA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A12007-20 | ADAPTER - TIRE INFLATION | 7 | |
A12007-23 | ADAPTER - TIRE INFLATION | 9 | |
A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 11 | |
A158068-501 | Kit - Bleed Air Tube (Adapters Set) | 4 | |
A158068‐501 | Kit - Bleed Air Tube (Adapters Set) | 4 | |
A21001-1 | HOIST ADAPTER - A/C PACK | 1 | |
A21001-44 | HOIST ADAPTER -AIR CONDITIONING PACK | 13 | |
A21001-45 | HOIST ADAPTER - AIR CONDITIONING PACK - 757 & 767-200/301 | 10 | |
A21003-1 | TUBING TEST ADAPTER - P/N A21003-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A21010-190 | ADAPTER - PPRV REMOTE STATIC PORT | 9 | |
A21010-203 | VACUUM TANK-PRESSURE RELIEF VALVE TESTER ADAPTER ASSY | 11 | |
A21013-50 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 2 | |
A21013-50-M | HOIST ADAPTER EQPT- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A24011-1 | HOIST ADAPTER - IDG (PW/GE/RR ENGINES | 12 | |
A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-132 | CABLE -0 ADAPTER | 1 | |
A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB | 5 | |
A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 3 | |
A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
A26001-24 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
A26002-36 | ADAPTER CABLE - TIME DELAY, CARGO FIRE EXTINGUISHING BOTTLE TEST BOX | 9 | |
A27004-1 | HOIST ADAPTER - LEADING EDGE SLAT DRIVE (INBOARD) | 3 | |
A27004-2 | Hoist Adapter - LE Slat Drive - Outbd | 4 | |
A27021 | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27021 REV G | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27021-124 | ADAPTER EQUIPMENT - CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27021-125 | ADAPTER EQUIPMENT - CONTROL WHEEL | 3 | |
A27021-29 | ADAPTER EQUIPMENT - | 16 | |
A27021-30 | ADAPTER EQUIPMENT-CONTROL WHEELS | 5 | |
A27021-69 | LOCK - ADAPTER EQUIPMENT, CONTROL WHEELS - 757 | 12 | |
A27021-96 | Adapter Eqpt - Control Wheels | 9 | |
A27021-97 | ADAPTER EQUIPMENT - CONTROL WHEEL | 8 | |
A27021-98 | ADAPTER EQUIPMENT - CONTROL WHEELS | 11 | |
A27031-29 | ADAPTER EQPT - WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27035-1 | Screwdriver-adapter rudder-elevator feel actuator cylinder | 3 | |
A27063-107 | ADAPTER CABLE - TLA (FOR FADEC GE-CF6-80C2F ENGINES) | 2 | |
A27063-113 | ADAPTER CABLE - TLA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27063-114 | ADAPTER CABLE - TLA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27063-115 | ADAPTER CABLE - TLA | 3 | |
A27063-116 | ADAPTER CABLE - TLA | 3 | |
A27063-124 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27063-125 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27063-126 | ADAPTER CABLE - CAPTAIN RUDDER PEDAL POSITION (FOR 767 PRIOR TO L/N 801) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27063-18 | ADAPTER CABLE - AILERON/ ELEVATOR/ RUDDER / COLUMN & WHEEL | 4 | |
A27063-19 | ADAPTER CABLE - AILERON/ ELEVATOR/ RUDDER / COLUMN & WHEEL | 4 | |
A27063-20 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 3 | |
A27063-21 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 3 | |
A27063-22 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
A27063-23 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
A27063-24 | ADAPTER CABLE - TLA/ SPOILER/ SPEEDBRAKE | 1 | |
A27063-25 | ADAPTER CABLE - TLA/ SPOILER/ SPEEDBRAKE | 1 | |
A27063-26 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 2 | |
A27063-27 | ADAPTER CABLE - THRUST REVERSER/ ELEVATOR/ RUDDER | 2 | |
A27063-28 | ADAPTER CABLE - ELEVATOR/ FLAP PDU/ SLAT CDU | 2 | |
A27063-30 | ADAPTER CABLE - SLAT PDU/ POWER LEVEL ANGLE | 2 | |
A27063-31 | ADAPTER CABLE-SLAT PDU/ POWER LEVEL ANGLE | 2 | |
A27063-32 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
A27063-33 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
A27063-34 | ADAPTER CABLE - SPOILER/ SPEED BRAKE/ TLA | 1 | |
A27063-35 | ADAPTER CABLE - SPOILER/ SPEED BRAKE/ TLA | 1 | |
A27063-36 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
A27063-37 | ADAPTER CABLE - SPOILER/ SPEED BRAKE | 1 | |
A27063-40 | ADAPTER CABLE - AUTO PILOT LATERAL CONTROL SERVO | 1 | |
A27063-41 | ADAPTER CABLE - AUTO PILOT LATERAL CONTROL SERVO | 1 | |
A27063-84 | ADAPTER CABLE - FLAP/ SLAT/ (ARINC 429 METHOD) | 2 | |
A27063-92 | ADAPTER CABLE - SLAT PDU (FOR 767 L/N 403 AND ON) | 2 | |
A27063-93 | ADAPTER CABLE - SLAT PDU (FOR 767 L/N 403 AND ON) | 2 | |
A27063-94 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 2 | |
A27063-95 | ADAPTER CABLE - FLAP/ SPOILER/ COLUMN & WHEEL | 2 | |
A27063-96 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
A27063-97 | ADAPTER CABLE - TLA/ RESOLVER | 1 | |
A27077-1 | ADAPTER - LEADING EDGE SLAT DRIVE | 6 | |
A27077-1-ML | ADAPTER-MFD PARTS LESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27078-7 | KIT - SPLINE ADAPTER | 1 | |
A27093-28 | ADAPTER CABLE (PART OF A27093-27) | 1 | |
A27097-1 | ADAPTER - PROTRACTOR, THRUST REVERSER LEVER | 3 | |
A27102-7 | Adapter - LE Slat and TE Flap-Manual Drive | 11 | |
A27102-8 | ADAPTER - LE SLAT and TE FLAP, MANUAL DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A27117-1 | SPLINE ADAPTER (A27117-4 INCLUDED IN A27117-1 TEST EQPT) | 8 | |
A28005-24 | TEST EQPT - 767 ADAPTER ASSY | 8 | |
A28005-43 | TEST EQPT - 777 ADAPTER ASSY | 3 | |
A28005-48 | ADAPTER ASSY APU SHROUD LINE - B737NG/B737MAX/B767 | 20 | |
A28005-81 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD 777 | 6 | |
A28005-82 | ASSEMBLY - ADAPTER , APU FUEL LINE SHROUD | 9 | |
A28013-10 | ADAPTER EQUIPMENT - AIR SUPPLY, SURGE TANK (PRIOR TO L/N 813 IF SERIES IS -400ER) | 1 | |
A28013-11 | ADAPTER EQUIPMENT - AIR SUPPLY, SURGE TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A28014-1 | PHASE CHECKING EQPT - PUMP, GROUND FAULT INTERRUPTER (USE BREAKOUT BOX A28014-2 AND ADAPTER CABLE ASSY A28014-3 WHICH ARE THE SUB-END ITEMS OF A28014-1) | 6 | |
A29001-1 | ADAPTER - HOIST, AIR DRIVEN PUMP | 6 | |
A29001-19 | Hoist adapter-air driven hydraulic pump | 3 | |
A29001-2 | ADAPTER -0 WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A29001-20 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 2 | |
A31007 | ADAPTER CABLE-TESTER,DIGITAL FLIGHT RECORDER SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A31007-1 | CABLE - ADAPTER (USE WITH TELEDYNE FDAU/DFDR TESTER P/N 2222786) | 2 | |
A31007-30 | Adapter Cable -Tester. Digital Flight Recorder System | 3 | |
A31007-39 | Adapter Cable - Tester, Digital Flight Recorder System | 1 | |
A31007-49 | ADAPTER CABLE - DIGITAL FLIGHT RECORDER SYSTEM TESTER | 6 | |
A31007-59 | CABLE - ADAPTER, TELEDYNE TESTER (USE WITH TELEDYNE DFDAU TESTER) | 16 | |
A31007-59-REVH | CABLE - ADAPTER, TELEDYNE TESTER. USE WITH TELEDYNE DFDAU TESTER.^T1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 19 | |
A32001-1 | WRENCH ADAPTER GLAND NUT MLG B767-200/300 | 1 | |
A32004-1 | Wrench adapter-gland nut.MLG | 11 | |
A32004-4 | Wrench Adapter -Gland Nut. Main Landing Gear (Mlg) | 1 | |
A32004-5 | WRENCH ADAPTER-GLAND NUT.MLG | 2 | |
A32020-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 13 | |
A32020-8 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 2 | |
A32020-8. | ADAPTER - HOIST, NOSE LANDING GEAR DRAG STRUT | 2 | |
A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
A32025-1 | WRENCH ADAPTER- AXLE NUT, NLG | 19 | |
A32027-146 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
A32027-147 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-150 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-151 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-155 | ADAPTER ASSY FOR PN:A32027-178 USE | 1 | |
A32027-156 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-168 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-179 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-180 | ADAPTER ASSY FOR A32027-178 USE | 1 | |
A32027-181 | ADAPTER ASSY FOR A32027-178 USE | 3 | |
A32027-182 | ADAPTER ASSY FOR A32027-178 USE | 3 | |
A32027-36 | ADAPTER ASSY FOR PN:A32027-178 USE | 2 | |
A32027-37 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
A32027-38 | ADAPTER ASSY FOR PN:A32027-178 USE | 2 | |
A32027-46 | ADAPTER ASSY FOR A32027-178 USE | 2 | |
A32034-1 | Wrench Adapter -Steering Nut. Nose Landing Gear (Nlg) | 8 | |
A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR (NLG) RETRACT ACTUATOR | 2 | |
A32045-108 | ADAPTER - WRENCH A32045-108 | 7 | |
A32047-6 | Adapter assy-retainer ring | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32047-7 | ADAPTER -0 RETAINER RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32069 | WRENCH ADAPTER-ANTISKID TRANSDUCER B767 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32069-1 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32069-7 | ADAPTER-WRENCH | 19 | |
A3207-9 | ADAPTER-SPIN UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32070-1 | TORQUE ADAPTER - SNUBBER NUT | 1 | |
A32075 | ADAPTER-ANTISKID TRANSDUCER SPIN-UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32075-1 | ADAPTER-ANTISKID TRANSDUCER SPIN-UP | 12 | |
A32075-1-9-10 | ADAPTER - ANTI SKID TRANSDUCER SPIN - UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32075-10 | ADAPTER- A/SKID TRANSDUCER SPIN UP | 21 | |
A32075-12 | ADAPTER - ANTI-SKID | 3 | |
A32075-9 | ADAPTER - ANTISKID TRANSDUCER, SPIN-UP | 3 | |
A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32101 | WRENCH ADAPTER-AXLE NUT,NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
A32101-2 | WRENCH ADAPTER NUT-NLG- | 7 | |
A32120-1 | Torque Adapter Set -Actuator Components. Main Landing Gear (Mlg) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A33003-28 | CABLE - ADAPTER | 2 | |
A33003-29 | CABLE - ADAPTER | 2 | |
A33003-30 | CABLE - ADAPTER | 2 | |
A33003-376 | CABLE - ADAPTER | 1 | |
A33003-65 | CABLE - ADAPTER | 1 | |
A34011-119 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
A34011-165 | CABLE ADAPTER - ASCTU (FOR 767 AIRPLANES WITH ASCTU) | 1 | |
A34016-138 | Adapter - Red | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A34016-139 | Adapter - Black | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A34016-140 | Adapter - Red | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A34016-141 | Adapter - Black | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A34016-141+A3455 | Adapter - Red | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A34017-1 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 4 | |
A34017-24 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 10 | |
A34017-35 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 2 | |
A34017-36 | TEST ADAPTER KIT - PITOT STATIC CONTINUITY LEAK AND FLUSHING | 3 | |
A342 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A36021-1 | ADAPTER CABLE - BITE MODULE, AIR SUPPLY SYSTEM | 2 | |
A3T-28-001 | ADAPTER PSDA300-F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A51300 | TOOL-PUMP END ADAPTER TO INFLATE/DEFLATE VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71006-80 | FWD-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71011-331 | WRENCH-TORQUE ADAPTER HEAD | 7 | |
A71013 | Hoist Adapter -Integrated Drive Generator (Idg) (Repl. By G24012) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71013 REV F | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71013-19 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 6 | |
A71013-32 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 3 | |
A71013-40 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
A71013-45 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
A71013-55 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 5 | |
A71013-82 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | 8 | |
A71013-88 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A71049-1 | ADAPTER - PT2 PROBE | 12 | |
A78026 | ADAPTER - SQUARE DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A78026-1 | ADAPTER - SQUARE DRIVE | 1 | |
AB-B999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
AB27001-VU2 | ADAPTER-TORQUE-TRUNNION NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB28001-SU7 | ADAPTER - FUEL RETURN VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB32001-SU3 | ADAPTER-WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB34001-D3X | ADAPTERS - AIR DATA SYSTEM FLUSHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB35001-T5U | HOSE - ADAPTER, ALTITUDE SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB38001-T5J | ADAPTER - ALTITUDE PRESSURE SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB49002-HD1 | ADAPTER-VENT AND DRAIN VALVE APU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB73001-M9M | ADAPTER-LOCK CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB73001-N8K | ADAPTER WRENCH - FASTENER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AB73001-T5B | ADAPTER - LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ABB999-30SE-1 | FUEL FILTER ADAPTER FIXTURE (BOWL) COM-2589 | 2 | |
ACN16-FM4F6-R | OLYMPUS CABLE/ADAPTER - 16 PIN LEMO TO 4 PIN FISCHER RECEPTACLE, REFLECTION, 6.0' FEET LONG, NORTEC 500- 2000 SERIES INSTRUMENTS. Includes Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ACP2D-N16-6-R | ADAPTER- 12-PIN LEMO TO LEMO 16 PIN, 6" REFL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ACS28001 | ADAPTER, STRAIGHT, NON-LOCK, CONNECTOR | 4 | |
AD-SC-SC-OM4-SXF-FS | COM-15047 ADAPTER - SNAP ON CONNECTOR, SC | 1 | |
AD-SC-SC-SMM-SX-FS | ADAPTER - FIBER OPTIC, SC | 1 | |
AD-SCU-SCU-SMP-DX-FS | ADAPTER - FIBER OPTIC, SC | 1 | |
AD600-12 | Pitot Static Adapter Kit for Bombardier CL-600 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AD953-7 | SET- PITOT- STATIC PROBE ADAPTER | 14 | |
AD953HT-7 | SET - PITOT-STATIC PROBE ADAPTER | 1 | |
AD967-47M | Pitot Static Accessory Adapter Kit for Boeing 747-400 | 3 | |
ADA A120-612 | Static-dynamic Pressure Test Adapters | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADA120-612 | STATIC-DYNAMIC PRESSURE ADAPTERS | 2 | |
ADA130J-723 | ADAPTER KIT, PITOT-STATIC | 1 | |
ADA737-678 | ADAPTER - STATIC TEST (COM-1921) | 14 | |
ADA757-612 | PITOT-STATIC ADAPTERS | 8 | |
ADA767HT-612 | ACCESSORY KIT - AIR DATA, 767 (PITOT/STATIC ADAPTERS, HOSES, ETC.) | 5 | |
ADAG24-945 | Gulfstream Pitot Static Adapter Kit - Gulfstream 2/3/4/400/450 | 2 | |
ADAPTER | ADAPTER, 0.5 INCH UNF(BT)TC/75-113-00-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADAPTER 1 1/6 X 3/4 | ADAPTER 1 1/16” UNF-MALE X 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADK941588W | CHRYSLER ADAPTER 3-TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADK941589W | FORD ADAPTER 2-TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADK941590W | GM ADAPTER 3-TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADK941591W | FORD ADAPTER 3-TAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ADPT-800 | ADAPTER FOR BC-815 501-1873-01, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AE89903E | HYDRAULIC QUICK DISCONNECT ADAPTER - FILL QD | 4 | |
AE89903H | HYDRAULIC QUICK DISCONNECT ADAPTER - RETURN QD | 3 | |
AGE -00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
AGE 50367 402 | ADAPTER RIGHT-HAND, ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE---00586-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | 5 | |
AGE-00017-401 | MAIN GEAR JACK ADAPTER (GSE 002) EMB-120 | 1 | |
AGE-00065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 5 | |
AGE-0048-3001 | ADAPTER-WHEEL SPEED | 10 | |
AGE-00483-001 | WHEEL-SPEED TRANSDUCER ADAPTER (TO OPERATE THE WHEEL SPEED TRANSDUCER) | 10 | |
AGE-00483-001 | WHEEL-SPEED TRANSDUCER ADAPTER | 10 | |
AGE-00483-401 | ADAPTER - WHEEL SPEED TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-00545-001 | ADAPTER - FLAP FLEX-IBLE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-00568-001 | ADAPTER - FLAP FLEXIBLE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-00586-001 | ADAPTER - FLAP FLEXIBLE SHAFT | 5 | |
AGE-00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
AGE-00602-001 | ADAPTER - TORQUE, WING | 3 | |
AGE-01421-401 | KIT - JACKING ADAPTER | 1 | |
AGE-01421-4011 | KIT - JACKING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-01468-401 | ADAPTER-JACKING | 2 | |
AGE-01480-001 | ADAPTER - WHEEL SPEED TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-01524-401 | GSE 198 ADAPTER - CABIN PRESSURIZATION TEST | 1 | |
AGE-01588-401 | ADAPTER, WHEEL CHANGE-NLG | 1 | |
AGE-01605-401 | ADAPTER - CABIN PRES-SURIZATION TEST | 1 | |
AGE-01605-401 | ADAPTER - CABIN PRESSURIZATION TEST | 1 | |
AGE-01834-401 | ADAPTER, APU TRANSPORT (ALT AGE-01834-401) | 7 | |
AGE-01837-403 | ADAPTER - LIFTING, ENGINE ASSEMBLY | 7 | |
AGE-02430-401 | ADAPTERS SET, LEAK TEST-FUEL LINE/TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-03003-401 | ADAPTER-PRESSURIZATION TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-03025-401 | SET- ADAPTERS, RIGGING FLAP | 1 | |
AGE-03132-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-03248-401 | SET - ADAPTERS, RIGGING FLAP-GSE 437 | 4 | |
AGE-03249-403 | SET-ADAPTERS LEFT HAND, RIGGING FLAP | 3 | |
AGE-03249-404 | SET-ADAPTERS RIGHT HAND, RIGGING FLAP | 2 | |
AGE-03328-401 | GSE 150 ADAPTER - LIFTING ENG AIR INTAKE | 2 | |
AGE-03390-401 | ADAPTERS SET - LEAKAGE TEST, FIREX SYS | 2 | |
AGE-03889-401 | ADAPTERS SET, LEAKAGE TEST-BLEED/AIR CONDITIONING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-04091-401 | ADAPTER - STATIC LINE | 4 | |
AGE-04134-401 | ADAPTERS-STAND | 7 | |
AGE-04251-401 | ADAPTER BOX P/N AGE-04251-401 | 2 | |
AGE-04363-401 | KIT - JACKING ADAPTER | 9 | |
AGE-04369-401 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | 2 | |
AGE-04443-401 | ADAPTERS SET-TEST, TORQUE MOTOR SERVO LINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-04511-401 | ADAPTER ASSEMBLY - PHENOM 100 NOSE | 2 | |
AGE-04540-401 | ADAPTER - FUEL LEAKAGE TEST, WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-04540-403 | CAP, ADAPTER-FUEL LEAKAGE TEST | 1 | |
AGE-04713-401 | ADAPTER - PRESSURIZATION TEST, CABIN | 4 | |
AGE-04713-401 / GSE-017 | CABIN PRESSURE TEST ADAPTER - EMBRAER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-04718-401 | ADAPTER SET-MEAS, TAP BACKLASH | 4 | |
AGE-0483-001 | ADAPTER-WHEEL SPEED TRANSDULER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-04890-401 | ADAPTERS - SET JACKING AIRCRAFT | 2 | |
AGE-05102-401 | SET - ADAPTERS/HARNESS, ADC CALI-BRATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-05102-403 | SET - ADAPTERS/HARNESS, ADC CALIBRATION | 3 | |
AGE-05190-401 | SET - TEST ADAPTERS | 1 | |
AGE-05190-403 | SET - TEST ADAPTERS,GSE-061 | 1 | |
AGE-05315-401 | ADAPTERS - MEAS HORIZ TAIL BACKLASH | 1 | |
AGE-05315-401-REVB | ADAPTERS - MEAS HORIZ TAIL BACKLASH | 1 | |
AGE-05367-401 | ADAPTER LEFT-HAND ASSY | 9 | |
AGE-05367-402 | ADAPTER RIGHT-HAND ASSY | 9 | |
AGE-05439-401 | ADAPTERS SET-LKG TEST, AUX FUEL SYS | 1 | |
AGE-05499-401 | ADAPTER, WHEEL CHANGE-MLG | 1 | |
AGE00065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 5 | |
AGE03390-401 | ADAPTERS SET - LEAKAGE TEST,FIREX SYS EMB195 | 2 | |
AGE04363-401 | KIT-JACKING ADAPTER | 9 | |
AGE05367-401 | ADAPTER LEFT-HAND, ASSY | 9 | |
AGE05367-401 | ADAPTER LEFT-HAND, ASSY | 9 | |
AGE05367-402 | ADAPTER RIGHT-HAND, ASSY | 9 | |
AGE05367-402 | ADAPTER RIGHT-HAND, ASSY | 9 | |
AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
AGE15011 | ADAPTER - ACM TORQUE CHECK | 5 | |
AGE70018 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER (25 FT CABLE RS485 TO RS232) | 5 | |
AGE70069 | ADAPTER - APU TRANSPORT - APS2300 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 5 | |
AGE70216 | CABLE-APU FADEC TO LAPTOP INTERFACE ADAPTER 25 FT | 9 | |
AGR-01480-001 | ADAPTER-WHEEL SPEED TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AHCCPS97F | HI-FLOW SWIVEL ADAPTER FEMALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AHCCPS97M | HI-FLOW SWIVEL ADAPTER MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AI1/4NPT-F4MS | ADAPTER FF 1/4 NPT - 7/16 MS | 1 | |
AI1/4NPT-F5MS | ADAPTER FF 1/4NPT - 1/2MS | 1 | |
AIBMD | ADAPTER-TEST, SARD SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AIBMD/J27072-1 | ADAPTER TEST-SARD SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AK1-380PAX | SET-ADAPTER,SUPPLEMENTAL COOLING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AK737 | KIT-ADAPTER, PITOT / STATIC (B737-CLASSIC) | 2 | |
AK737-900 | ADAPTER KIT FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 2 | |
AKMD10 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-10 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AKMD11 | Pitot Static Accessory Adapter Kit for DOUGLAS MD-11 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AL1-MBNC | ADAPTER - LEMO L1 MALE TO MALE BNC Includes Certificate of Conformance | 1 | |
ALT45200001 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 1 | |
AM-1928-100 | BOOSTRAP ADAPTER FOR CF6-80 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AM-1928-900 | ADAPTER, BOOTSTRAP CF6-80C2 | 1 | |
AM-2371-1000 | CRADLE,ADAPTER - CRADLE | 3 | |
AM-2811-603 | ENGINE STAND - ADAPTERS | 1 | |
AM-2811-608 | ENGINE STAND - ADAPTERS | 1 | |
AN4 TEE ADAPTER | AN4 MALE FLARE TEE SHAPE - ADAPTER 3-WAYS FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AN4 UNION ADAPTER | AN4 MALE FLARE STRAIGHT UNION - ADAPTER 2-WAYS FIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AN807-4D | ADAPTER - STRAIGHT, TUBE TO HOSE | 3 | |
AND10089-3PC-1006 | ADAPTER - ADAPTER FOR FILLING WITH OXYGEN STATIONARY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP-BEE530-3 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
AP208 | ADAPTER, UNDERWING - FUEL TANK VENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AP2D-BR-B | ADAPTER - 12 PIN MALE LEMO TO FEMALE BURNDY. DIFERENTIAL / BRIDGE. Includes Certificate of Confromance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APA17887-4-6 | SYSTEM PURGE ADAPTER APA17887-4-6 | 1 | |
APA97632M1-3-4-4 | ADAPTER-PITOT TEST | 3 | |
APA97632M1-4-4-4 | SMARTPROBE PRESSURE ADAPTER PART NUMBER:APA97632M1-4-4-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APCENG-301004-2 | ADAPTER -COMPRESSOR HOSE TO ABAS KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APHN-6-6F | ADAPTER - FEMALE QUICK DISCONNECT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
APV7873-01-0 | ADAPTER - TORQUE TOOL | 2 | |
ARINC 429 | RAR-USB-0805W-ECCBL-CASE - ADAPTER | 2 | |
AS33514E10 | ADAPTER - SELF SEALING COUPLING | 1 | |
AS33514E10 TYPE | ADAPTER - SELF SEALING COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AS33514EIO TYPE | ADAPTER - SELF SEALING COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AS5174D0504V | ADAPTER 5/16" JIC-MALE X 1/4" JIC-MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AS5180D04 | O2 ADAPTER -3 OFF TOOL | 3 | |
AS5195D0404 | ADAPTER-ELBOW, 90°,NPT-JIC 37 (HAWKER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AST-2877 | ADAPTER-TORQUE WRENCH | 7 | |
AT100D/FF | OPTICAL ADAPTER AT 100D/FF-1F8C5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT100D/NF | OPTICAL ADAPTER AT 100D/NF-1F8C5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT100S/FF | OPTICAL ADAPTER AT 100S/FF-1F8C5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT100S/NF | OPTICAL ADAPTER AT 100S/NF-1F8C5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT100S/NF-IV94N | AT100S/NF-IV94N IPLEX NX TIP ADAPTER | 2 | |
AT120D/FF-IV84 | DIRECT VIEWING , 120 DEGREE FIELD OF VIEW TIP ADAPTER.DEPTH OF FIELD 25-INFINIY MM | 2 | |
AT120D/FF-IV86 | ADAPTER, OPTICAL TIP, OLYMPUS, AT120D/FFIV86, 120 DEG VIEW, 6 MM TIP,4-190 MM FIELD, FOR IPLEX IV86 VIDEOSCOPE, GREEN | 2 | |
AT120D/FF-IV94N | AT120D/FF-IV94N IPLEX NX TIP ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT120D/FF-IV96G | IV96G-AT120D/FF IPLEX G SERIES OPTICAL TIP ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT120D/FF-IV96N | TIP ADAPTER-INCL.O-RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT120D/NF-IV96G | IV96G-AT120D/NF IPLEX G SERIES OPTICAL TIP ADAPTER | 1 | |
AT120D/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
AT120S/FF-IV84 | Side Viewing , 120 degree field of view Tip Adapter Depth of field 6 - Infiniy mm | 2 | |
AT120S/FF-IV96N | TIP ADAPTER-INCL.O-RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT120S/NF-IV84 | Side Viewing , 120 degree field of view Tip Adapter, Depth of field 1 - 20 mm | 2 | |
AT120S/NF-IV96N | AT120S/NF-IV96N IPLEX NX TIP ADAPTER | 1 | |
AT31799 | WHEEL-SENSOR TORQUE-WRENCH ADAPTER | 5 | |
AT31799-IAS | ADAPTER-TORQUE WRENCH | 1 | |
AT406CVAC-3 | VACUUM ADAPTER-CENTRAL VAC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT50D/50D-IV84 | Stereo Tip Adapter Depth of field 5 mm - Infinity mm | 2 | |
AT50S/50S-IV84 | Stereo Tip Adapter Depth of field 4mm - Infinity mm | 1 | |
AT520CTT-3RH | ADAPTER-3/32 | 1 | |
AT5661 | PORT ADAPTER WHITAKER CMM 21-58-02 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT69-35663-1001 | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
AT69-35663-1001PM | INPUT CAVITY PLUG TORQUE WRENCH ADAPTER - REMOVING AND INSTALLING INPUT CAVITY PLUG AT69-35663-1001 | 1 | |
AT80D/FF-IV94N | OPTICAL TIP ADAPTER AT80D/FF-IV94N IPLEX NX (OLYMPUS CODE:N4148700) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI503A-4 | DRILL ADAPTER THREADED #10-32 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI520CTT30L | ADAPTER - 3/ | 1 | |
ATI520CTT3RH | ADAPTER - 3/ | 1 | |
AW-2MIT2A264-0812 | ADAPTER PLATE-PORTABLE WATER TANK | 1 | |
AW-H47682 | ADAPTER-MLG | 1 | |
AW-J47549 | ADAPTER-NLG | 1 | |
AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
A−C148659−1/13 | ADAPTER-FLAP ACTUATOR INPUT SHAFT | 1 | |
B-75 | ADAPTER - DRAIN, STARTER | 2 | |
B07001 | ADAPTER-JACKING | 1 | |
B07001-7 | Adapter -Jacking. Forward Body | 13 | |
B07001-7-M | ADAPTER -0 JACKING, FWD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B07002 | ADAPTER -0 AIRPLANE STABILIZATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B07002-1 | Adapter - Airplane Stabilization | 13 | |
B12006 | ADAPTER -0 LUBRICATION, SPOILER OUTER HINGE LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B12006-1 | LUBE ADAPTER-SPL OUTER HINGE LING | 13 | |
B19285-1 | "TOOL - CHARGING ADAPTER TO CHARGING VALVE (WITH O-RING WHICH CONFORMS TO | 1 | |
B19586-3 | ADAPTER -TORQUE WRENCH (BOTTLE FITTING TO RESERVOIR) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B200004-42 | B20004-42 ADAPTER - ACCESS PANEL, LEVERAGE (SC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B20002-1 | TORQUE ADAPTER - SOCKET TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B20004 | LEVERAGE ADAPTER EQUIPMENT - ACCESS PANEL | 1 | |
B20004-21 | ADAPTER - ACCESS PANEL, LEVERAGE | 14 | |
B20004-42 | LEVERAGE ADAPTER EQUIPMENT -ACCESS | 11 | |
B20004–42 | LEVERAGE ADAPTER EQPT- | 11 | |
B21117 | , SCREW (MS24694-S102 OR AN509-416R15 (4 REQD.), BOLT (MS21296-04007, (4 REQD.), BOLT (NAS7703-9 (4 REQD.)), BOLT, (MS21296-04007 (4 REQD.)), BOLT, (AN4-7A (2 REQD.)), SCREW (AN509-416R15 (2 REQD, 2 DRILL MOTORS (1,100 TO 2,000 RPM), SPIN ADAPTER (2571004 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B25002 | FUNCTIONAL TEST EQUIPMENT -0 ADAPTER, OFF WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B25002-37 | FUNCTIONAL TEST EQUIPMENT - ADAPTER, OFF WING ESCA | 4 | |
B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27029-1 | Lug Spanner -Torque Adapter. Rudder Jackshaft | 1 | |
B27033 | TORQUE ADAPTER -0 AILERON PCU INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27033-1 | Torque Adapter -Aileron Power Control Unit Installation | 9 | |
B27072 | ADAPTER KIT - OUTBD/AFT FLAP SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27072 REV NC | ADAPTER KIT - OUTBD/AFT FLAP SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27072-1 | Adapter Kit -Outboard/Aft. Flap Sling | 2 | |
B27075 | HOIST ADAPTER -0 INST/REMOVAL, FLAP TRACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27075-1 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 1 | |
B27075-20 | HOIST ADAPTER - INSTALLATION/REMOVAL, FLAP TRACK | 4 | |
B27075-20-M | HOIST ADAPTER-REM/INST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27080-1 | ADAPTER -0 LUBE STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B27080-2 | ADAPTER -0 LUBE STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B2800-11 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 7 | |
B2800-13 | Adapter-Sump DrainValve, Removal/Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B28001 | ADAPTER-SUMP DRAIN VALVE,REM/INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B28001-1 | REMOVAL/INSTALLATION ADAPTER-SUMP DRAIN VALVE | 7 | |
B28001-11 | ADAPTER - SUMP DRAIN VALVE, REMOVAL/INSTALLATION | 10 | |
B28001-13 | ADAPTER-SUMP DRAIN VALVE | 13 | |
B28001-18 | Adapter - Sump Drain Valve, Removal/Installation | 17 | |
B28001-2 | ADAPTER - FUEL SUMP DRAIN VALVE | 12 | |
B28001-5 | ADAPTER - SUMP DRAIN VALVE REM/INSTL. | 6 | |
B28001-8 | ADAPTER-SUMP DRAIN VALVE | 2 | |
B28002-1 | ADAPTER-SUMP FUEL DRAIN | 20 | |
B28007 | PRESSURE TEST ADAPTERS -0 ENGINE FUEL FEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B28007-1 | PRESSURE TEST ADAPTERS - ENGINE FUEL FEED | 3 | |
B28007-2 | PRESSURE TEST ADAPTER - ENGINE FUEL FEED | 5 | |
B29001-23 | ADAPTER SCREEN - RAM AIR TURBINE - 757/767 | 14 | |
B29001-46 | ADAPTER SCREEN - RAM AIR TURBINE - 757/767 (GDC10135) | 11 | |
B31001 | CABLE -0 ADAPTER, BUS ANALYZER, ARINC 429 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B31001-1 | Cable -Adapter. Bus Analyzer. Arinc 429 | 2 | |
B32004 | HOIST ADAPTER -0 DRAG STRUT, NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32004-1 | Hoist Adapter -Drag Strut. Nose Landing Gear (Nlg) | 6 | |
B32008 | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32008 REV B | HOIST ADAPTER - RECTRACT ACTUATOR, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32008-1 | Hoist Adapter -Retract Actuator. Main Landing Gear (Mlg) | 3 | |
B32015 | HOISTING ADAPTER SET-MLG COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32015-38 | HOISTING ADAPTER SET-MAIN LANDING GEAR COMPONENTS | 6 | |
B32036 | ADAPTER -0 ACTUATOR, LANDING GEAR TRUCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32036-1 | ADAPTER - ACTUATOR, LANDING GEAR TRUCK POSITIONER | 3 | |
B32054 | ADAPTER -0 UPLOCK, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32054-1 | Adapter -Uplock. Main Landing Gear (Mlg) | 6 | |
B32057-35 | Adapter - Aircraft Jacking Point | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B32067-1 | Wrench adapter-nose wheel steering tiller handle | 4 | |
B32071-1 | HOIST ADAPTER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 3 | |
B362-008407 | TORQUE - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B362-04180A | TORQUE - ADAPTER | 1 | |
B362-0911 | ULB BATTERY, TORQUE ADAPTER (TELEDYNE BENTHOS, ELP-362D BEACONS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B362-09111 | TORQUE - ADAPTER, | 5 | |
B411 | Adapter - Rubber Tipped | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B52008 | ADAPTER -0 CLOCKING NO.1 & NO.2 CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B52008-1 | ADAPTER - CLOCKING, NUMBER 1 AND 2 CARGO DOOR ROTARY ACTUATOR | 4 | |
B54019 | ADAPTER EQPT-STRUT UNLOAD,FWD ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B54019-23 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 6 | |
B54019-24 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 6 | |
B54019-40 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT | 5 | |
B54019-41 | ADAPTER EQUIPMENT - STRUT UNLOAD, FORWARD ENGINE MOUNT 220V | 5 | |
B57003 | ADAPTER EQPT -0 TRUNNION BEARINGS AND MOUNT, MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B57003-3 | Adapter Equipment -Trunnion Bearing And Mount. Main Landing Gear (Mlg) Installation And Removal | 1 | |
B57003-33 | ADAPTER EQPT - TRUNNION BEARING AND MOUNT, MLG INSTL AND REMOVAL | 11 | |
B57003-34 | Adapter Equipment -Trunnion Bearing And Mount. Main Landing Gear (Mlg) Installation And Removal | 2 | |
B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B71004-10 | ADAPTER - LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B71005-2 | 8 IN. EXTENSION- ADAPTER | 8 | |
B71005-3 | ADAPTER RB211-535 AFT MOUNT RAI | 3 | |
B71024-37 | INCH DRIVE LONG SOCKET ADAPTER FOR P/N B71024-36 | 1 | |
B71024-39 | STRAIGHT EXTENSION ADAPTER FOR P/N B71024-36 | 3 | |
B71044 | ADAPTER EQUIPMENT-LOAD TEST,PRESSURE RELIEF DOOR LATCH | 1 | |
B71044-1 | ADAPTER-DOOR LATCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B71044-10 | ADAPTER - LOAD TEST | 4 | |
B71044-28 | ADAPTER EQUIP - LOAD TEST, PRESS RELIEF DR LATCH | 12 | |
B737-72-00-00 | ADAPTER ENGINE PRESERVATION CFM56-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B75-48 | ADAPTER -STARTER FILL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B76004-1 | ADAPTER - THRUST CONTROL INNER SHAFT 76-10-03 | 1 | |
B761P5003101 | BREAK-OUT-BOX, 9-PIN ADAPTER | 1 | |
B78008-21 | ADAPTER ASSEMBLY - (B78008-21 IS | 5 | |
B78016-9 | ADAPTER - WORM GEAR SHAFT (B78016-9 IS INCLUDED IN B78016-1) | 4 | |
B809-3005 | ADAPTER - OXYGEN CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B952 | FUEL QUANTITY ADAPTER SET 6150-00-408-3005 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAB DRG 1827 | ADAPTER - OUTLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-195-1 | Rivet Set Shank Adapter - Shank Opening: .498 Rivet Set to be Used: .401 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT-195-2 | Rivet Set Shank Adapter - Shank Opening: .401 Rivet Set to be Used: .498 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
BEI3840 | MAIN WHEEL ADAPTER ASSY (P/N 3-1573-1) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-103-P1 | ADAPTER FOR WHEEL ASSY 3-1546 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-115-P1 | ADAPTER FOR WHEEL ASSY 3-1596 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-121-P2 | MAIN WHEEL ADAPTER ASSY(FOR 2612311-1) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-125-P1 | NOSE WHEEL ADAPTER ASSY(FOR 2607825-2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-234-P1 | BAUER WHEEL ADAPTER P/N 3-1268-4 (BRAND NAMEEQUAL) MODEL BEI3840-234-P1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BEI3840-243-P1 | BAUER WHEEL ADAPTER P/N 3-1634 (BRAND NAMEEQUAL) MODEL BEI3840-243-P1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BH27956 | TEMPCAL ADAPTER PROBE - PACK/ZONE DUCT OVERHEAT SW | 1 | |
BL51555 | WRENCH-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BMH-NR 1014831 | ADAPTER - CYCLEAN ENGINE WASH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BMH-NR 1035837 | ADAPTER-CYCLEAN ENGINE WASH ( COM-14882 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BNC-Z/50-500K | BNC to Miz-20 & 22 adapter, 50-500KHz | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BNC-Z21/50-500K | Miz 21 to female BNC adapter, 50-500KHz | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BRN-029G | 3-1/4IN DIA ADAPTERENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BRN-045G9 | 4-1/8IN DIA ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BST-2912-9 | ADAPTER RING-PROPELLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C07002-1 | ADAPTER - JACK, WING (2 EA) | 29 | |
C07004-1 | ADAPTERS - JACK, AFT BODY (SPL-1495) | 25 | |
C07007-1 | ADAPTER - JACK, FORWARD BODY | 14 | |
C07007-11 | Adapter - Jack, Forward Body | 8 | |
C07007-17 | ADAPTER, JACK - FWD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C07007-19 | ADAPTER - JACK, FORWARD BODY | 19 | |
C07007-2 | ADAPTER - JACK, FORWARD BODY | 2 | |
C0M10946 | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C12003-1 | ADAPTER NOZZLE - RAM AIR INLET MODULATION SHAFT LUBRICATION | 5 | |
C19848-1 | ADAPTER - FOR HYDROSTATICTESTING (RESERVOIR) | 1 | |
C19848-3 | ADAPTER-FOR HYDROSTATIC TESTING (D17977 AND 64535 RESERVOIRS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C21004-1 | JACK ADAPTER- INSTL /REMOVAL, AIR CONDITIONING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C21005 | HOIST ADAPTER-AIR CONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C21005-1 | Hoist Adapter -Air Conditioning Pack | 4 | |
C21005-62 | HOIST ADAPTER - AIR CONDITIONING PACK (CE) | 3 | |
C21005-70 | HOIST ADAPTER - AIR CONDITIONING PACK CE | 8 | |
C21006-7 | ADAPTER - HOSE, EXHAUST | 10 | |
C21011-1 | ADAPTER - HOSE, EXHAUST | 3 | |
C24002 | JACK ADAPTER-VSCF & IDG | 2 | |
C24002-31 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 1 | |
C24002-39 | Jack Adapter -Variable Speed Constant Frequency (Vscf) And Integrated Drive Generator (Idg) | 3 | |
C24002-40 | JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) AND INTEGRATED DRIVE GENERATOR (IDG) | 5 | |
C24002-41 | JACK ADAPTER-IDG | 7 | |
C24002-45 | JACK ADAPTER-IDG | 2 | |
C24002-68 | Cradle adapter assembly - AC gen/CSD (cradle only ) | 2 | |
C24002-77 | JACK ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 13 | |
C24002-78 | "JACK ADAPTER - VARIABLE SPEED CONSTANT FREQUENCY (VSCF) | 15 | |
C27007-32 | TEST CABLE ADAPTER - TRIM CONTROL TESTER | 5 | |
C27017-1 | Adapter Set - Torque Wrench T.E. Flaps | 3 | |
C27020-1 | Adapter, Torque Wrench - L.E. Slat | 3 | |
C27024-1 | Adapter-Torque Wrench | 1 | |
C27040 | HOIST ADAPTER-INSTL/REMOVAL.FLAP TRACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27040-1 | Hoist Adapter - Installation/Removal, Flap Track | 5 | |
C27040-1-M | HOIST ADAPTER-INST/REM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27040-29 | ADAPTER - HOIST | 3 | |
C27046-13 | ASSEMBLY - WRENCH ADAPTER | 25 | |
C27048-1 | VISE ADAPTER EQPT- ACTUATOR, L.E. FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27060 | ADAPTER EQUIPMENT - CONTROL WHEEL | 1 | |
C27060-1 | Adapter Equipment - Control Wheel | 21 | |
C27060-22 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST | 5 | |
C27061-1 | ADAPTER - WRENCH, FLIGHT SPOILER ACTUATOR POWER CONTROL UNIT | 6 | |
C27064 | Torque Wrench Adapter - Manual Stabilizer Trim Wheel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C27064-1 | ADAPTER -TORQUE WRENCH | 16 | |
C27076-1 | ADAPTER - TORSION ROD INSTALLATION LE SLAT | 2 | |
C27076-9 | Adapter-torsion rod instl,le slat | 4 | |
C28001-1 | Adapter -Sump Drain. Center Wing Tank | 6 | |
C28003-1 | Adapter--Center Wing Sump Drain | 6 | |
C29005-1 | Adapter -Tee. Standby Hydraulic System Test | 5 | |
C29006-1 | ADAPTER - GROUND SERVICE CONNECTION, HYDRAULIC POWER | 3 | |
C29006-14 | Adapter - Flare Swivel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C29006-27 | B737 TOOLING - ADAPTER - GROUND SERVICE CONNECTION | 6 | |
C29006-9 | Adapter - Flare Swivel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32013 | TORQUE WRENCH ADAPTER-AFT BRG RTNR NUT,MLG TRUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32013-1 | TORQUE WRENCH ADAPTER - AFT BEARING RETA | 16 | |
C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 6 | |
C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 1 | |
C32020-15 | ADAPTER ASSY - NLG | 9 | |
C32029 | ASSEMBLY - WRENCH ADAPTER | 1 | |
C32029-3 | ASSEMBLY - WRENCH ADAPTER | 4 | |
C32029-38 | ASSEMBLY - WRENCH ADAPTER (C32029-6, PART OF KIT C32029-38 OR C32029-45) | 6 | |
C32029-45 | ASSEMBLY - WRENCH ADAPTER (C32029-6, PART OF KIT C32029-38 OR C32029-45) | 17 | |
C32029-48 | Assembly - Wrench Adapter | 6 | |
C32029-49 | ASSEMBLY - WRENCH ADAPTER, | 6 | |
C32029-50 | ASSEMBLY - WRENCH ADAPTER | 5 | |
C32029-52 | ASSEMBLY, WRENCH ADAPTER, C32029-55 (INCLUDED IN C32029 KIT) | 2 | |
C32029-6 | ASSEMBLY - WRENCH ADAPTER | 6 | |
C32029-7 | ASSEMBLY - WRENCH ADAPTER | 6 | |
C32029-87 | ASSEMBLY - WRENCH ADAPTER | 4 | |
C32030 -31 | ASSEMBLY - WRENCH ADAPTER | 7 | |
C32031-3 | PUSH ADAPTER ASSEMBLY-R/I EQPTAFT | 3 | |
C32031-5 | PULL ADAPTER ASSEMBLY - R/I EQPT | 4 | |
C32039-1 | Adapter - Functional Test, NLG Steering Actuator | 7 | |
C32048 | ADAPTER ASSY-UPLOCK,MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C32048-1 | Adapter Assembly -Uplock. Main Landing Gear | 13 | |
C32048-2 | ADAPTER ASSEMBLY - UPLOCK, MAIN LANDING GEAR | 2 | |
C32062-1 | ADAPTER EQUIPMENT - WRENCH, HOOK SPANNER | 2 | |
C34001 | ADAPTER ASSEMBLY - SMITHS (LEAR-SIEGLER) FLIGHT MANAGEMENT COMPUTER (FMC)/CONTROL DISPLAY UNIT (CDU), BOEING AUTOMATIC TEST STATION (ATS). | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C34001-1 | Adapter Assembly - FMC/CDU/ATS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C34006-53 | ADAPTER, TRAY - ELECTRONIC FLIGHT INSTRUMENTS SYST | 2 | |
C34006-57 | Adapter, Tray - EFIS Symbol Generator Software Loading | 7 | |
C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C34011-1 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C34011-11 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C34011-21 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C36001-10 | ADAPTER FOR CFM56-3 | 2 | |
C36001-11 | ADAPTER FOR CFM56-3 | 2 | |
C36001-17 | MALE ADAPTER AN4/MS4 (SUBCOMPONENT OF C36001-63) | 5 | |
C36001-18 | ADAPTER FOR CFM56-7 | 3 | |
C36001-9 | ADAPTER FOR CFM56-3 | 3 | |
C37099-103 | TOOL-ADAPTER, PRESSURE TEST VALVE | 4 | |
C44001 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 1 | |
C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME | 3 | |
C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 5 | |
C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - ADAPTER PLATE LIFT ASSY, C44001-50 (INCLUDED IN C44001-55 KIT)/ C44001-60 (INCLUDED IN C44001-58 KIT) | 4 | |
C44001-58 / C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 2 | |
C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ADAPTER PLATE/RADOME | 3 | |
C47943 | C47943 ADAPTER - FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN NUT | 5 | |
C49004-10 | AFT ADAPTER ASSEMBLY GTCP 85-129 | 5 | |
C49004-11 | FWD ADAPTER ASEMBLY GTCP 36-280 | 4 | |
C49004-12 | AFT ADAPTER ASSEMBLY GTCP 36-280 | 3 | |
C49008-37 | Adapter Equipment - APU Jacking | 11 | |
C52007-1 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC OVERWING EXIT HATCH (THE BOEING COMPANY) | 10 | |
C52007-8 | TORQUE WRENCH ADAPTER EQUIPMENT - AUTOMATIC | 2 | |
C52008-1 | Adapter - Torque Wrench, Galley and Entry Door | 19 | |
C55001-7 | Adapter-Elevator Hinge Ftg | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C6X-S | #8 C6XS TRIPLE-LOK® 37° FLARE JIC TUBE FITTINGS AND ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C71001 | WRENCH ADAPTER-AFT CONEBOLT NUT | 7 | |
C71001-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE | 10 | |
C71014-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGIN | 16 | |
C71014-3 | WRENCH ADAPTER-AFT CONEBOLT NUT | 14 | |
C71019-7 | ADAPTER WRENCH - AFT | 12 | |
C71020-25 | Bracket - Dynamometer Adapter Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C72928-12 | T-ADAPTER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C72928-30 | T-ADAPTER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C73001-1 | Remove/Install Adapter - CFM56-3 Fuel Pump and Main Eng.Control | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C79560 | Q-Spring torque adapter | 1 | |
C80212-30 | ADAPTER-RUDDER PENAL FORCE CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C9393G01 | ADAPTER SET BHGE 1C9393G01, PRESSURE TEST/RIG - VIGV, VBV, VSV USED IN WP 1112 00, WP 1113 00, WP 1311 00, WP 131200, WP 1313 00, WP 1410 00, WP 1411 00, WP 2110 00 SPECIAL TOOL FOR PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CAT5643-12C | ADAPTER, TOOL-TORQUE WRENCH | 2 | |
CAT5643-13C | ADAPTER, TOOL-TORQUE WRENCH | 3 | |
CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
CGA 540 | REFILL COUPLING CGA 540 X 0.563 - 18UNF-2B THREADS REGULATOR TEST ADAPTER AVOX SYSTEMS (SAFRAN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CH723-464 | ADAPTER-7-16A-F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A03-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AB2A/BACL10AL12FKAS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A06-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | 1 | |
CIT-BFTA100-A09-060 | ADAPTER CABLE - FIBER OPTIC, AIRPLANE CONNECTOR (HUD, HDD, EAFR, ACP, ADB) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A11-060 | ADAPTER CABLE - FIBER OPTIC (BACC65AN2E/BACL10AL12FKAS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A17-060 | ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE DATA LOAD PORT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A18-060 | ADAPTER CABLE - FIBER OPTIC (PANASONIC IFE DATA LOAD PORT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A21-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A22-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CN-E/BACI10AP06FAS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A23-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAP) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A24-060 | ADAPTER CABLE - FIBER OPTIC (BACC65CM-E/BACI10AP06FAS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-A34-060 | ADAPTER CABLE - FIBER OPTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CIT-BFTA100-K04 REV B | Adapter Cable Kit - Fiber Optic, Airplane Connecto | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CJMD107-003 | JACK ADAPTER - AXLE | 3 | |
CJMD207-003 | JACK ADAPTER (550 AIRPLANES -0627 THRU 0800, S550 AND 560 - 0001 THRU - 0538) | 5 | |
CJMDL27-005 | ADAPTER -- TORQUE WRENCH | 1 | |
CJMDX21-001 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 4 | |
CJMDX29-001 | ADAPTER -- HYDRAULIC SAMPLING | 1 | |
CM-S-389T | ADAPTER TOOL SET - ALUMINUM | 2 | |
CM-S-5015S | ADAPTER TOOL SET - ALUMINUM | 2 | |
CM-S-837 | ADAPTER TOOL SET - ALUMINUM | 2 | |
CM389T-25A | ADAPTER TOOL - ALUMINIUM (PLUG) | 2 | |
COM 2464 | ADAPTER - STARTER DRAIN, ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13438 | ADAPTER - PITOT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13441 | ADAPTER - STATIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13482 | ADAPTER – PPRV REMOTE STATIC PORT PART OF SPL-6692 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13695 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13696 | CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13697 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-13750 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
COM-1916 | COM-1916 PITOT TEST ADAPTER | 1 | |
COM-1921 | ADAPTER - STATIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CP20128-5 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
CP20128-6 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
CP30089 | Adapter Hoist RB211-424 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CP30248 | ADAPTER - LEFT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
CP30249 | ADAPTER - CENTER (ON-WING GEARBOX REMOVAL) | 1 | |
CP30250 | ADAPTER - RIGHT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
CP30809 | ADAPTER - HOIST KIT | 1 | |
CP30839-3 | KIT - ADAPTER HOIST, RB211 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CS-710-207 | OPEN -END WRENCH ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CS-710-596 | HV TEST ADAPTER CABLE (POST SIL NO. H0212-25-0160) (CABLE LENGTH: 600 MM (23.62 IN.)) | 1 | |
CSA125678-4 | PITOT ADAPTER FOR HAWKER HS-125 600-900, F-70/100, | 1 | |
CSA30024-4 | CESSNA C-208 PITOT TEST ADAPTER | 3 | |
CSA74703HT-4-4 | ADAPTER - PROBE PITOT STATIC (SPL-5292) | 1 | |
CSA75700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 3 | |
CSA75700HT-3 | ADAPTER - PITOT TEST | 3 | |
CSA77700HT-3 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 2 | |
CSA78700-3HT | ADAPTER - PITOT HEAD | 1 | |
CST1450-4 | ADAPTER - STATIC LINE | 2 | |
CST20250-4 | Stall Warning Adapter for HS-125 600-900, F-70/100, BAE-146 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CSTH20180-4 | STATIC ADAPTER FOR HAWKER HS-125 600-900, F-70/100 | 2 | |
CSTL19725-4 | ADAPTER - STATIC TEST | 4 | |
CT22045 | ADAPTER,TEST-INTERFACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CT22046 | ADAPTER-INTERFACE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CT29699-1 | ADAPTER,CABLE-BDM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D07103500000 | JACK ADAPTER-FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D14089-101 | ADAPTER, VACUUM D14089-101 (WOODEN PACKING FIXTURE) | 4 | |
D19946-101 | VACUUM ADAPTER PRE S.B. 004-25-48 | 2 | |
D22827000 | ADAPTER-NLG JACK | 8 | |
D23038000 | ADAPTER-MLG JACK | 3 | |
DAH600865 | ADAPTER - TORQUE WRENCH, RAT | 3 | |
DAPT-70-0003 | ADAPTER VERTICAL HOISTING PROPELLER DAPT70-000-629 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DAPT61-0014-00 | ADAPTER-TORQUE | 1 | |
DAPT61-0015-00 | ADAPTER-TO TORQUE PROP FASTENERS | 8 | |
DAPT61-0015-00-IAS | ADAPTER-TORQUE PROP FASTENERS | 1 | |
DAPT61-0015-00IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
DAPT61−0015−00-IAS | ADAPTER-TO TORQUE PROP FASTENERS | 1 | |
DAPT65-0093-00 | ADAPTER-PRESSURIZATION, HYDRAULIC HAND PUMP | 7 | |
DB-75 | ADAPTER - DRAIN, STARTER | 5 | |
DB75 | ADAPTER DRAIN, STARTER,CFM56-7 ENGINGE | 5 | |
DB75-108 | ADAPTER- STARTER DRAIN, ENGINE (EATON AEROSPACE) | 3 | |
DB75-48 | ADAPTER -STARTER FILL | 1 | |
DC-10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DC-600 | VENT VALVE TESTER WITH ADAPTERS DC-VT-SM8, DC-VT-U-B40 | 3 | |
DC10-22-10-03 | CENTRAL AIR DATA COMPUTER-REMOTE TEST ADAPTER ( DC-10 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DCM1608-1 | ADAPTER,INSTL/RMVL-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DCM1630-1 | Adapter,Instl/Rmvl-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DCM1885-THUMBSCREW-REVNC | KEYWAY ADAPTER FOR DB37 BACKSHELL - THUMBSCREW | 1 | |
DG-200 | SCALE-SOPRING,0-150 POUNDS,WITH HOOK AND PAD ADAPTERKIT | 9 | |
DG1035AB03 | ADAPTER-DIGITAL/ANALOG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DH8 - 723M | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 9 | |
DH8-7-612 | KIT-PITOT STATIC TEST ADAPTER | 5 | |
DH8-723 | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 3 | |
DH8-723M | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 9 | |
DH8-834 | KIT-DASH 8 100−400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
DH8-834M | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | 3 | |
DMAK A-320-B | ADAPTER KIT PITOT STATIC AIRBUS - MARCHIORI | 1 | |
DMAK-A320 | ADAPTER KIT MPS-34 AIRBUS | 3 | |
DMAK-PC12X-E1K0P0V3 | HOSE KIT FOR ADAPTER KIT DMAK-PC12 | 1 | |
DMAKA320 | ADAPTER KIT MPS-34 AIRBUS | 3 | |
DN7ABF | -7 ADAPTER ASSEMBLY | 1 | |
DPPH-150 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT | 3 | |
DPS1000 | ADAPTER KIT - PITOT STATIC TESTER | 9 | |
DRT63394-23 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DRT68238 | ADAPTER-TORQUE | 6 | |
DRT68973 | ADAPTER, CHARGING - MLG | 12 | |
DRT68973 | ADAPTER, CHARGING - MLG | 12 | |
DT600 | Analyzer - Databus, Datatrac 650H (DT650H). Includes Arinc 629 Adapter Cable To Be Used With Customer Furnished Arinc 629 Coupler. | 4 | |
DZZ7020-1-B102 | ADAPTER-HORIZONTAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7020-3 | ADAPTER - HOR STAB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7062-1 | Adapter set-MLG trunnion bolt torque | 1 | |
DZZ7062-501 | Adapter set-MLG trunnion bolt torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7062-501-312 | ADAPTER SET - MLG TRUNNION BOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7075-1 | TORQUE ADAPTER - MLG TRUCK PIV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7077-1-392 | ADAPTER-MLG RETRACT CYLINDER NUT TOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7080-1 | Adapter Assy - NLG Instl | 1 | |
DZZ7080-501 | Adapter Set - NLG Instl | 2 | |
DZZ7146 | ADAPTER - OTBD ELEV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7148 | ADAPTER - NLG UNLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7154-1 | ADAPTER - AXLE NUT | 7 | |
DZZ7213-1 | ADAPTER - CARGO DOOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7225 | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7225 REV A | ADAPTER-TORQUE, AFT. ENG. MOUNT (CF6-50) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7230-1 | Adapter-hinge pin puller,cargo door | 2 | |
DZZ7230-501 | Adapter-hinge pin puller,cargo door | 1 | |
DZZ7230-503 | Adapter-hinge pin puller,cargo door | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7252 | ADAPTER - TEST ADG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7252-1 | Adapter-test,ADG | 1 | |
DZZ7282-1 | Adapter - MLG Jacking | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7320 | ADAPTER - JACKING | 1 | |
DZZ7320-1 | Adapter,jacking-wing tip | 2 | |
DZZ7355-175 | Adapter Assy - Fire Sys | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7369-501 | ADAPTER-ANTISKID TRANSDUCER SPIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7369-501-392 | ADAPTER-ANTISKID TRANSDUCER SPIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DZZ7380-1 | Adapter - Fuel Dump Drain | 3 | |
DZZ7380-2 | Adapter - Fuel Dump Drain | 2 | |
E2J52189-2 | ADAPTER - ROTATE HP SYSTEM, BREATHER ROTOR | 1 | |
E79-800PRESSADP/939 | ADAPTER-CABIN PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L10A | ADAPTER GM-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L30A | ADAPTER CHRY-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L31A | ADAPTER CHRY-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L40A | ADAPTER NISS-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L42A | ADAPTER MULTI-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L49A | ADAPTER JEEP-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L51A | ADAPTER HYUN-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L52A | ADAPTER TOY-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L53A | ADAPTER MAZDA-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L56A | ADAPTER VW-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L58A | ADAPTER NISS-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L62A | ADAPTER MB-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L70A | ADAPTER FORD-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L74A | ADAPTER BM-1B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L75A | ADAPTER MB-2A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0355L90B | ADAPTER MULTI-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAA0360L00A | ADAPTER, HAR-1 POWER SPORTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0222J40A | ADAPTER KIT-DUAL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0222J83B | KIT-ADAPTER HUB MTG AC400 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L20A | ADAPTER, BM-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L21A | ADAPTER, DLC-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L22A | ADAPTER, HAR-2 | 1 | |
EAK0347L23A | ADAPTER, POL-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L24A | ADAPTER, DUC-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L25A | ADAPTER, SUZ-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L26A | ADAPTER,HON-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L27A | ADAPTER, KAW-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L28A | ADAPTER, KAW-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L29A | ADAPTER, KAW-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAK0347L30A | ADAPTER, YAM-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAX0066L22A | ADAPTER SERIAL USB V-VW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EAX0068L27A | OBDI CABLE ADAPTER, DA-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ED1394-1 | ADAPTER - TORQUE, MANUAL LOCK RELEASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EECT900-10 | 5 VOLT ADAPTER MULTI-PROBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEHD493128 | 9-PIN DEUTSCH ADAPTER - 1 METE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEHD499095 | PRO-LINK EDGE AC ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEHD499098 | PRO-LINK EDGE HDMI WS ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEPV5F-15 | 5/16-24 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EEPV5F-17 | 1/16-17 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EETA309A05A | 2NDARY COIL ADAPTER LEAD M-VP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
EMB-01411-005 | ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
EMB-01411-401 | Adapter-Cabin Pressurization Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ETOR.101 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | 2 | |
ETOR.102 | TORQUE SCREWDRIVER WITH TORQUE-SET ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ETS65263 | SOCKET ADAPTER 1/2-1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ETS65782 | SOCKET ADAPTER 3/4-3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F-285M-03 | ADAPTER-FIBRE OPTIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F-28SM-01 | ADAPTER - FIBER OPTIC, SC-SC MULTIMODE | 1 | |
F-28SM-03 | ADAPTER - FIBER OPTIC, SC | 2 | |
F0808MT1-A01-003.3 | ADAPTER CABLE - FIBER OPTIC, SC-SC | 1 | |
F080MT1A010033 | ADAPTER CABLE-FIBER OPTIC SC-SC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F0812MT1A01 | ADAPTER CABLE - FIBER 0PTIC, SC-LC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F0812MT1A010033 | ADAPTER CABLE-FIBER OPTIC SC-LC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F28SM-03 | ADAPTER-FIBER OPTIC ,SC | 2 | |
F533-R1115-000W6400-01 | EBV ADAPTER SEC 15 C40 & C40.1 - LHY=953 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-000W6400-02 | EBV ADAPTER SEC 15 C40.2 & C53.1 - LHY=953 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-000W6400-03 | EBV ADAPTER SEC 15 C40 & C40.1 - LHY=1456 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-000W6400-04 | EBV ADAPTER SEC 15 C40.2 & C53.1 - LHY=1456 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-001W6400-01 | EBV ADAPTER SEC 15 C40 & C40.1 - LHY=953 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-001W6400-02 | EBV ADAPTER SEC 15 C40.2 & C53.1 - LHY=953 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-001W6400-03 | EBV ADAPTER SEC 15 C40 & C40.1 - LHY=1456 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F533-R1115-001W6400-04 | EBV ADAPTER SEC 15 C40.2 & C53.1 - LHY=1456 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALV | 2 | |
F70009 | ADAPTER ASSY -0 AIRCRAFT JACKING USED TO ADAPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70009-1 | ADAPTER ASSY -0 AIRCRAFT JACKING USED TO ADAPT | 1 | |
F70051 | ADAPTER -0 THRUST REVERSER HOIST JT3C USED IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70067 | ADAPTER -0 SPLINED SHAFT,INBD.FLAP DRIVE USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70068 | ADAPTER -0 THRUST REVERSER WRENCH USED TO DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70103 | ADAPTER -0 THRUST REVERSER AND SOUND SUPP USED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70174 | THRESHOLD ADAPTER SET -0 CARGO LOADING PROVIDES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70174-1 | THRESHOLD ADAPTER -0 CARGO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70174-2 | THRESHOLD ADAPTER -0 CARGO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70174-3 | THRESHOLD ADAPTER -0 CARGO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70175-1 | Wrench adapter-face spanner,LUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70194-1 | ADAPTER-TILT TABLE | 4 | |
F70206-1 | Adapter assy-hollow bolt,fuel leak tracing | 11 | |
F70206-1-ML | ADAPTER LESS -21 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70245 | ADAPTER -0 BATTERY CHARGER TO BATTERY TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70249 | APU ADAPTER STAND AND TRANS. CART THE F70249-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70252-1 | ADAPTER - ROLLER PAILET (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70291 | ADAPTER SET -0 TORQUE WRENCH USED TO TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70291-1 | ADAPTER SET-TORQUE WRENCH | 2 | |
F70291-3 | Adapter assy-int, 9/16 wrench | 1 | |
F70291-4 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-5 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-6 | INTERNAL ADAPTER - TORQUE WRENCH | 1 | |
F70291-7 | Adapter assy-int,7/32 wrench | 1 | |
F70300-1 | ADAPTER-FLAP DRIVE | 23 | |
F70304 | ADAPTER -0 RESTRAINING LINE, VERTICAL FIN USED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70306 | TORQUE ADAPTER -0 SKID DETECTOR NUT, MLG TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70312-18 | ADAPTER - TORQUE WRENCH | 2 | |
F70312-20 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
F70312-23 | TORQUE WRENCH ADAPTER CROW-FOOT SPL-5284 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70312-25 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000(NOM'L)A/C FLATS | 2 | |
F70312-29 | WRENCH ADAPTER - CROWFOOT, 4.515-4.525 SPAN | 5 | |
F70312-32 | ADAPTER - WRENCH, CROWFOOT | 8 | |
F70312-4 | TORQUE WRENCH ADAPTER CROW-FOOT | 7 | |
F70312-46 | Wrench-Adapter,Crowfoot,4.515-4.525 | 8 | |
F70326-1 | Torque wrench adapter-manual stabilizer | 15 | |
F7033-1 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-21 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-24 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F7033-25 | Adapter - Constant Speed Drive and AC Generator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70333 | ADAPTER-CONSTANT SPEED DRIVE&A.C GENERATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F70333-24 | ADAPTER - & JACK | 11 | |
F70333-25 | ADAPTER - CONSTANT SPEED DRIVE | 8 | |
F71138 | ADAPTER ASSY -0 AIRCRAFT JACKING TO PROVIDE A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71139 | ADAPTER -0 AIRCRAFT JACKING | 9 | |
F71188 | ADAPTER ASSY -0 HYDRAULIC PRESSURE USED DURING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71188-500 | Adapter Assy - Hydraulic Pressure | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71206 | ADAPTER ASSY -0 AC GENERATOR/DRIVE MOUNT. USED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71252 | ADAPTER - 16/32-INCH SPLINE, 3/4-INCH MALE HEX | 12 | |
F71268 | WRENCH ASSY -0 AIR COND. ADAPTER SEC. TO HOLD | 1 | |
F71403 | ADAPTER ASSY-TAIL PIPE & TR,JT3D FOR INSTL AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F71420 | TEST SET & ADAPTER ASSY -0 HF COMM SYS USED AS A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72714-81 | ADAPTER ASSY - FUEL QTY SYS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72731-102 | ADAPTER ASSY-FUEL QUANTITY SYS | 3 | |
F72731-114 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 502 | 2 | |
F72731-115 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 503 | 3 | |
F72731-116 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
F72731-116 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
F72731-117 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
F72731-118 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 4 | |
F72731-119 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 500 | 2 | |
F72731-120 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 507 | 1 | |
F72731-121 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 508 | 1 | |
F72731-130 | Adapter Assembly - Fuel System | 8 | |
F72731-130-E | ADAPTER-FUEL QTY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72731-81 | ADAPTER ASSYS & FUEL & OIL QUANTITY TEST SETS 737-200 THRU 501 | 5 | |
F72731-82 | ADAPTER ASSY-FUEL&OIL QUANTITY INDICAT | 5 | |
F72823-2 | Test Adapter Assembly - Static Port | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72823-23 | Test Adapter Assembly - Static Port | 3 | |
F72823-33 | TEST ADAPTER ASSEMBLY - STATIC PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72823-36 | Test adapter assy-static port | 4 | |
F72823-37 | TEST ADAPTER ASSY -0 STATIC PORT | 2 | |
F72823-38 | TEST ADAPTER ASSY -0 STATIC PORT | 1 | |
F72823-39 | TEST ADAPTER ASSEMBLY - STATIC PORT | 1 | |
F72823-40 | Test Adapter Assy- Static Port | 18 | |
F72849-1 | ADAPTER ASSEMBLY - BRAKE INST & REMOVAL | 3 | |
F72867-1 | Adapter Assembly - Control Wheel, Torque and Force Test | 23 | |
F72867-1 | ADAPTER ASSEMBLY - CONTROL WHEEL | 23 | |
F72883-10 | ADAPTER ASSY SET-LUBRICATION FITTINGN+ÃTRACK ROLLE | 4 | |
F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72899-1 | Wrench adapter-MLG man ext shaft BRG retainer unt | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72900 | TORQUE ADAPTER- AILERON CONTROL CAPTAINS TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72900-1 | Torque adapter-aileron control column,captains | 5 | |
F72907 | ADAPTER ASSY-LUBRICATION FTG,INBD AIL. TAB ROD. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72914 | TORQUE ADAPTER ASSY -0 RUDDER CONTROL POWER UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72914-1 | Torque adapter assy-rudder control power unit instl | 3 | |
F72915 | TORQUE WRENCH ADAPTER ASSY -0 CLAMSHELL JAM NUT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72915-1 | Torque wrench adapter assy-clamshell jam nut | 2 | |
F72922 | TORQUE ADAPTER -0 MLG FWD TRUNNION BOLT USED TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72922-1 | Torque adapter-MLG fwd trunnion bolt | 1 | |
F72922-4 | Torque adapter-MLG fwd trunnion bolt | 6 | |
F72925-15 | ADAPTER SET - PROTACTOR, FWD THRUST LEVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72928-12 | T-ADAPTERASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72928-30 | T-ADAPTER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72930 | TORQUE ADAPTER -0 MLG SIDE STRUT TO TORQUE FWD. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72930-1 | Torque adapter-main landing gear side strut | 1 | |
F72935 | ADAPTER -0 ENG FUEL FEED LINE EVACUATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72941 | ADAPTER -0 PRESSURE LIMITING, GREASE GUN TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72946-1 | DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72946-2 | Dolly. Work Stand And Adapter -Thrust Reverser | 1 | |
F72950-128 | APU Adapter Stand - Model 737 | 1 | |
F72950-4 | APU ADAPTER - 727 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72952-1 | Adapter Set - Protactor, Fwd Thrust Lever | 2 | |
F72952-14 | ADAPTER SET-PROTRACTOR?FWD THRUST LEVER | 9 | |
F72952-14 -15 | Adapter Set -Protractor. Forward Thrust Lever | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72952-15 | ADAPTER SET -PROTRACTOR. FORWARD THRUST LEVER | 23 | |
F72952-3 | ADAPTER SET -0 PROTRACTOR, FWD THRUST LEVER USED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72954 | HOIST ADAPTER -0 AUXILIARY POWER UNIT TO HANDLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72955 | ADAPTER -0 TORQUE WRENCH, LG TRUNNION NUT TO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72957-51 | ADAPTER - TOWBAR | 2 | |
F72977-29 | ADAPTER EXTENSION -0 SOLDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72977-64 | ADAPTER ASSY - HYD B | 9 | |
F72986 | ADAPTER-TORQUE WRENCH, MLG UP-LOCK, TEST WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F72986-1 | Torque wrench adapter-MLG up-lock,test | 4 | |
F72998-1 | ADAPTER CABLE - N1 SIMULATOR (BOEING 737-100/200) | 1 | |
F72998-15 | ADAPTER CABLE - N1 SIMULATOR (BOEING 737-100/200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80-0-1552-14 | Adapter-Torque Wrench | 1 | |
F80-0-2705 | ADAPTER TORQUE WRENCH (NSN 5120-01-320-1495) KC135 | 3 | |
F80-4-67 | Adapter-Torque Wrench | 1 | |
F80-4-67PM | ADAPTER-TORQUE WRENCH | 1 | |
F8000-1 | ADAPTER - AFT JACK | 1 | |
F8000-7 | ADAPTER - FWD JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80000 | ADAPTER-AIRCRAFT JACKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80000-1 | JACKING PADS - AFT ADAPTER | 7 | |
F80000-7 | ADAPTER-AIRCRAFT JACKING | 23 | |
F80001-1 | ADAPTER - AIRCRAFT JACKING (AFT BODY) | 22 | |
F80011-1 | CRADLE ADAPTER - AC GENERATOR AND CSD | 4 | |
F80011-16 | ADAPTER - CONSTANT SPEED DRIVE | 3 | |
F80012-1 | ADAPTER - PIN SPANNE | 8 | |
F80013-1 | Adapter Assembly -Pin Spanner | 14 | |
F80014-16 | HOIST ADAPTER-STAB JACKSCREW | 14 | |
F80014-2 | STAB.JACKSCREW-HOIST ADAPTER | 13 | |
F80020 | WRENCH-ADAPTER 737 MLG TRUNNION PIN NUT | 1 | |
F80020-2 | WRENCH - ADAPTER | 1 | |
F80020-3 | WRENCH - ADAPTER | 1 | |
F80020-4 | WRENCH - ADAPTER | 1 | |
F80020-5 | WRENCH-ADAPTER 737 MLG TRUNNION PIN NUT | 16 | |
F80020-8 | WRENCH - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80026-1 | ADAPTER - ELEVATOR HOISTING | 8 | |
F80032-1 | Wrench Adapter - Face Spanner Lug, MLG | 7 | |
F80033 | ADAPTER ASSY-WRENCH,HOOK SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80033-1 | ADAPTER ASSY-WRENCH | 19 | |
F80033-8 | Adapter Assembly - Wrench, Hook Spanner | 22 | |
F80033-8-M | ADAPTER -0 WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F800331-1 | ADAPTER ASSY -NLG STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F800331-8 | ADAPTER ASSY -NLG STRUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80036 | -1 ADAPTER -0 SLOTTED 45 SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80051-1 | Wrench Adapter - Face Spanner, Lug | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80057-1 | ADAPTER WRENCH-AFT CONE | 13 | |
F80060-1 | ADAPTER - AIRPLANE JACKING | 3 | |
F80060-6 | JACKING ADAPTER-AIRCRAFT | 25 | |
F80091-1 | THRESHOLD ADAPTER SET - CARGO LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80091-3 | THRESHOLD ADAPTER SET - CARGO LOADING (BOEING 737-200) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80122-11 | Adapter eqpt-torque wrench,flap drive transmission | 2 | |
F80122-12 | ADAPTER EQUIPM. - TORQ. WRENCH FLAP DRIVE TRANSMISSION | 3 | |
F80122-13 | U-JOINT ADAPTER EQPT | 2 | |
F80122-14 | ADAPTER EQUIPMENT - TORQUE WRENCH, FLAP DRIVE TRANSMISSION | 11 | |
F80122-15 | Adapter eqpt-torque wrench,flap drive transmission | 10 | |
F80122-16 | U-JOINT ADAPTER EQPT | 9 | |
F80122-XX | Adapter Equipment -Torque Wrench. Flap Drive Transmission | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80167-16 | NEEDLE ADAPTER- WELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80167-17 | NEEDLE ADAPTER- WELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80167-5 | NEEDLE ADAPTER- WELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80167-6 | NEEDLE ADAPTER- WELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80167-7 | NEEDLE ADAPTER -0 WELD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80171-1 | Adapter - Torque, Galley and Entry Door | 8 | |
F80176 | ADAPTER, TORQUE WRENCH- MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80176-1 | TORQUE WRENCH ADAPTER - MLG TRUNNION, AFT BEARING | 5 | |
F80176-8 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT - | 13 | |
F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 13 | |
F80176-9 | ADAPTER -0 WELDMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80186-3 | WHEEL ADAPTER MAIN- WHEEL REPLACEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80192-1 | Adapter-torsion test l.e. slats detent arm | 3 | |
F80202-1 | Allen Adapter - Nose Wheel Steering Cylinder | 8 | |
F80212 | ADAPTER-RUDDER PENAL FORCE CHECK | 1 | |
F80212 REV B | ADAPTER - RUDDER PEDAL FORCE CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80212-1 | ADAPTER - RUDDER PEDAL FORCE CHECK | 3 | |
F80212-10 | ADAPTER -0 RUDDER PEDAL FORCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80212-19 | CHECK ADAPTER - RUDDER PEDAL FORCE | 6 | |
F80212-30 | Adapter -Rudder Pedal Force Check | 18 | |
F80212-30-M | ADAPTER-RUDDER PEDAL FORCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80228-1 | Adapter Cable - N1 Simulator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80228-15 | ADAPTER CABLE - N1 OR N2 SIMULATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80229 | CABLE ADAPTER ASSY-FIRE EXT SYS | 4 | |
F80229-20 | ADAPTER CABLE ASSEMBLY - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM | 15 | |
F80229-48 | CABLE ADAPTER ASSY-FIRE EXT SYS | 12 | |
F80229-57 | ADAPTER CABLE - FIRE EXTINGUISHING SYSTEM | 6 | |
F80229-59 | CABLE ADAPTER -FIRE EXT SYS | 14 | |
F80229-60 | ADAPTER CABLE ASSEMBLY - FIREX | 8 | |
F80229-61 | CABLE ADAPTER ASSY-FIRE EXT SYS | 15 | |
F80254 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
F80257 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
F80259-1 | ADAPTER-TORQUE WRENC | 2 | |
F80259-1 -2 -3 -4 | Adapter -Torque Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
F80259-2 | ADAPTER - TORQUE WRENCH F80259-2 | 2 | |
F80259-3 | ADAPTER - TORQUE WRENCH F80259-3 | 3 | |
F80259-3PM | ADAPTER-TORQUE WRENCH 1,000 | 1 | |
F80259-4 | ADAPTER - TORQUE WRENCH | 2 | |
F97000F38301005000 | FILL-IN/FLUSH LINE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FA-SCSC-SS | ADAPTER - FIBER OPTIC, SC-SC SINGLEMODE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FAL1669503 | ADAPTER 50-PIN BREAK-OUT BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FAL1669503 OR TF50B39001 | ADAPTER OR 50-PIN BREAK OUT BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB98D0130 | COM-1926 A320 ADAPTER FLUSHING AIR DATA SYSTEM | 1 | |
FBO-1 | TWO-CYLINDER REFILL STATION FBO-1 – INCLUDES THE GAUGE, THREE ADAPTERS (540, PB, AND SCOTT), RESTRICTOR, SS BRAIDING/HARDWARE FOR TWO CYLINDERS (LEASED FROM YOUR LOCAL GAS SUPPLY COMPANY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FBPT-RQX8-P | Inspection Adapter - Fiber Optic, Quadrax, Plug | 1 | |
FCS.ADP-CFM565B | ADAPTER FOR CFM56-5B ENGINE | 1 | |
FCS.ADP-CFM567B | ADAPTER FOR CFM56-7B ENGINE | 1 | |
FCS.ADP-GE9094 | ADAPTER FOR GE90-94B ENGINE | 1 | |
FDS40-0201 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | 6 | |
FDS40-0202 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) (S-31-031-01-02) | 7 | |
FDS40-0203 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | 6 | |
FDS40-0215 | RACK ADAPTER HHMPI FDS40-0301 FOR HONEYWELL P/N 980-6022-001 CVR, | 3 | |
FDS40-0232 | CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
FDS40-0247 | 2100RACK ADAPTER (ON-AIRCRAFT) | 3 | |
FDS40-0274 | CABLE - ADAPTER, HHMPI (FOR HONEYWELL MODEL HFR5-V SSCVR) | 2 | |
FDS40-0322 | POWER SUPPLY - MPI (WALL CHARGER WITH ADAPTERS) | 2 | |
FDS400-201 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | 6 | |
FDS400-202 | COM-13697 Cable - Adapter, HHMPI (L-3 Comm FA2100 DFDR only) | 7 | |
FDS400-203 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | 6 | |
FDS400-232 | COM-13696 CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
FDS400-322 | Power Supply - MPI (wall charger with adapters) | 2 | |
FE171901 | ADAPTER-TORQUE | 8 | |
FG-M6ADP | ADAPTER STANDARD SET FOR RGANGE 2-200 LB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FGFB932303 | ADAPTER - NLG WHEEL REM/INS | 1 | |
FI6006350814 | Adapter AIRTEC Valve 635-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJC01-35-13000 | SUPPORT-ADAPTER OUTER (OUTER WING ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJC01-35-42000 | ADAPTER JACK BALLE -NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJC02-35-20000 | TRIPED JACK-ADAPTER REARFUSLAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJC02-35-41000 | ADAPTER JACK BALLE -MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJCO1-35-13000 | SUPPORT-ADAPTER OUTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FJCO3-35-24000 | SUPPORT-ADAPTER REARFUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FL6007-WS5-01 GB | RADIO ADAPTER, HI-VIS GREEN | 3 | |
FM000846 | ADAPTER - NOSE WHEEL AXLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FM001486 | ADAPTER - MAIN WHEEL MENA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FORCECR-MO | ADAPTER FORCE CR-MO 80968MPB | 1 | |
FP3-10 | ADAPTER CABLE 10-PIN ACTEL FP3-10 PIN ADAPTER-KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FRDH 141 | ADAPTER-TORQUE | 12 | |
FRDH101 | DRIVE TORQUE ADAPTER R 3/8 - 5/16 | 3 | |
FRDH14 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FRDH141 | ADAPTER-TORQUE | 12 | |
FRDH161 | TORQUE ADAPTER 1/2 - 3/8" DRIVE 12-POINT SAE 1/2" STANDARD TORQUE ADAPTER | 2 | |
FRDH181 | TORQUE ADAPTER, 3/8" DRIVE, 12-POINT, 9/16" | 3 | |
FRES10 | 3/8"DRIVE-5/16" TORQUE ADAPTER 2 EA | 4 | |
FRES12 | 3/8"DRIVE-3/8" TORQUE ADAPTER 2 EA | 6 | |
FRES14 | 3/8"DRIVE-7/16" TORQUE ADAPTER 2 EA | 6 | |
FS0003 | Adapter- Fuel | 1 | |
FS0005 | Adapter - Oil | 1 | |
FS0006 | Adapter - Temp Sensor | 1 | |
FS0007 | Adapter - Pressure Switch | 1 | |
FS0008 | Adapter - Fuel Diverter Valve | 1 | |
FST8168 | P-8 FUEL CONTROL ADAPTER SET / MFC: 50027 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FTGCD4202 | STATIC ADAPTER FOR PN DMAK-A320X-E1K0P0V3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FTI-MB/LB-A1 | Puller Unit: MB-XX Mandrel Adapter - Allows LB Mandrel and Nosecap to attach to MB Puller Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FXT-13305 | INTERFACE TEST ADAPTER (ITA) (FXT-13305) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G07005-1 | Adapter Assy - Aircraft Jacking Points IV & V | 2 | |
G07006-1 | Adapter Assembly. Aircraft Jacking -Points Vii And Viii | 1 | |
G07009-1 | ACKING ADAPTER RECOVERY EQUIPMENT - AFT INBOARD AND OUTBOARD DIAGONAL BRACE | 1 | |
G07015-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 583 | 1 | |
G1003210001-001 | ADAPTER - NLG SERVICING | 4 | |
G20014-1 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 2 | |
G21008-1 | ADAPTER EQUIPMENT - AIR CYCLE MACHINE (CE) | 2 | |
G21009-1 | ADAPTER EQUIPMENT -HEAT EXCHANGER/PLENUM REMOVAL/ INSTALLATION. AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G21009-40 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 1 | |
G21009-57 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 1 | |
G21009-64 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 1 | |
G21009-65 | ADAPTER EQMT - HEAT EXCHANGER / PLENUM, R&I, AC PACK | 2 | |
G21010-1 | ADAPTER - CONDENSER, COMPACT MIXER, WATER EXTRACTOR, REMOVAL/INSTALLATION, AIR CONDITIONING PACK (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G21012-1 | Adapter - Reheater Removal Install AC Pak | 2 | |
G24012 | HOIST ADAPTER - INTEGRATED DRIVE GENERATOR (IDG) | 2 | |
G24012-1 | HOIST ADAPTER - IDG | 10 | |
G24013-1 | Accessory Adapter -Hoist System Rb211 And Cf6-50 Engines (Repl. By A71013) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G26001-16 | ADAPTER CABLE - TEST EQUIP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G26001-162 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 3 | |
G26001-163 | ADAPTER CABLE - TEST EQUIPMENT, | 3 | |
G26001-165 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (ENGINE) | 3 | |
G26001-166 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 4 | |
G26001-167 | ADAPTER CABLE - TEST EQUIP | 3 | |
G26001-69 | ADAPTER CABLE-TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM(APU) | 1 | |
G26001-70 | ADAPTER CABLE-TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM(APU) | 3 | |
G26001-71 | CABLE ASSY ADAPTER FOR G26001-105 | 2 | |
G26001-72 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (ENGINE) | 5 | |
G26001-73 | ADAPTER CABLE - TEST EQUIPMENT, | 3 | |
G26001-74 | ADAPTER CABLE-TEST EQUIPMENT FIRE EXTINGUSHING SYS | 3 | |
G26001-91 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 1 | |
G26003-17 | ADAPTER-ANEMOMETER HOT WIRE | 1 | |
G26005-13 | ADAPTER - HOT WIRE ANEMOMETER | 1 | |
G26005-17 | ADAPTER - HOT WIRE ANEMOMETER | 4 | |
G26005-17-M | ADAPTER-HOT WIRE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G26005-24 | ADAPTER-HOT WIRE ANEMOMETER | 10 | |
G26005-9 | ADAPTER - HOT WIRE ANEMOMETER | 3 | |
G26009-91 | 1-1/4"TUBE ADAPTER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27011 | SPLINE ADAPTER -0 TORQUE SENSOR, INBD & OUTBD TE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27011-1 | SPLINE ADAPTER - TORQUE SENSOR, INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27020 | SPLINE ADAPTER -0 OUTBD XMSN, INBD T.E. FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27020-1 | SPLINE ADAPTER - OUTBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
G27030 | TORQUE ADAPTER -0 HORIZONTAL STABILIZER ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27030-1 | Torque Adapter -Horizontal Stabilizer Actuator | 8 | |
G27033-1 | Adapter Cable - Outboard Aileron Lockout | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27033-2 | ADAPTER CABLE - OUTBD AILERON LOCKOUT | 5 | |
G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27034-1 | SPLINE ADAPTER-ANGLE GEARBOX DRIVE INBD TE FLAP | 1 | |
G27046-3 | ADAPTER ASSEMBLY (G27046-3 INCLUDED IN G27046-119 & -138) | 1 | |
G27046-4 | ADAPTER ASSEMBLY (G27046-4 INCLUDED IN G27046-119 & -138) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27046-5 | ADAPTER ASSEMBLY (G27046-5 INCLUDED IN G27046-119 &-138) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27046-6 | ADAPTER ASSEMBLY (G27046-6 INCLUDED IN G27046-119 & -138) | 1 | |
G27055-1 | Adapter -Hoisting. Power Unit. Inboard Trailing Edge Flap (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27056-1 | HOIST ADAPTER - POWER DRIVE UNIT, OUTBOARD TRAILING EDGE FLAP (CE) | 2 | |
G27064-31 | Adapter-TE Flap Actuator | 5 | |
G27082-1 | Torque Adapter - Flap Track Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27082-12 | TORQUE ADAPTER-FLAP TRACK INSTALLATION | 1 | |
G27090 | REM/INSTL ADAPTER-INBOARD ELEVATOR ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G27090-1 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 2 | |
G27090-54 | REMOVAL/INSTALLATION ADAPTER - INBOARD ELEVATOR ACTUATOR (CE) | 1 | |
G27091-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD T.E. FLAP (G27091-3 ASSY INCLUDED IN G27091-1) | 5 | |
G27094-1 | SPLINE ADAPTERS - SUPPORT ASSEMBLY, TORQUE TUBE | 1 | |
G27094-4 | SPLINE ADAPTER - SUPPORT ASSY, TORQUE TUBE | 1 | |
G28006 | ADAPTER EQUIPMENT -0 CALIBRATION, FUEL QUANTITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28006-1 | ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY TOTALIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28008 | TEST ADAPTER EQPT -0 FUEL LINE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28008-1 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28008-2 | TEST ADAPTER EQUIPMENT - FUEL LINE PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28008-4 | Test Adapter Assy - Fuel Line Pressure | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VALVES | 9 | |
G28014-15 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VALVE | 2 | |
G28018-28 | ADAPTER - TEST | 11 | |
G28018-7 | ADAPTER - FITTING AS | 5 | |
G28035-1 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
G28035-2 | ADAPTER EQUIPMENT - BOOST AND JETTISON PUMPS | 2 | |
G29001 | TEST ADAPTER -0 PRESSURE SWITCH, HYDRAULIC PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G29001-1 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G29001-2 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G29007-3 | Adapter assy(747-400) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G29007-4 | Adapter assy(747-8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G29014-1 | RETURN & PRESSURE EXTENSION ADAPTER - GROUND SERVICE DISCONNECT | 5 | |
G32011 | WRENCH ADAPTER -0 OVERSIZE GLAND NUT, WING, AND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G32060-1 | ADAPTER - ROD END TORQUE | 2 | |
G52009 | TEST ADAPTER-ACTUATOR ACCESS DOOR LATCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G54008-19 | ADAPTER - FOR REML/INSTL | 1 | |
G54014 | ADAPTER -0 PIVOT BOLT, SPRING BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G54014-1 | Adapter - Pivot Bolt, Spring Beam | 2 | |
G600-120001-1 | KIT-NITROGEN CHARGINE ADAPTER | 5 | |
G600-270052-1 | ADAPTER - TORQUE CHECK | 5 | |
G600-280001-1 | ADAPTER ASSY -GRAVITY | 5 | |
G600-280001-20 | Adapter Assembly - Gravity Defueling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G600-280001−1 | ADAPTER ASSY -GRAVITY | 5 | |
G600-290002-1 | KIT - SAMPLING ADAPTER | 3 | |
G600-290002???1 | KIT - SAMPLING ADAPTER | 3 | |
G600-290002−1 | KIT - SAMPLING ADAPTER | 3 | |
G600-340001-1 | Adapter - Adf Antenna Bonding Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G600-360001-37 | Kit - Shop Air Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G600-520001-1 | ADAPTER - CABIN DOOR TORQUE | 1 | |
G600-524101-1 | Torque Wrench Adapter - Equipment Bay Door Handle | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G600−280001−1 | ADAPTER ASSY -GRAVITY | 5 | |
G600−520001–1 | ADAPTER - BAGGAGE DOOR HANDLE TORQUE WRENCH | 1 | |
G601-360002-41 | Kit - Inlet Adapters (14Th Stage) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G601-710008-157 | SLING, ENGINE/POWERPLANT (INCLUDE ADAPTER 932-200) | 5 | |
G601-710008-401 | ADAPTER LIFTING ENGINE SLING (932-200) | 2 | |
G601R102002-1 | ADAPTER KIT - MOORING | 1 | |
G601R121611-1 | ADAPTER KIT - NITROGEN CHARGING | 5 | |
G601R121801-29 | ADAPTER-FILLING | 5 | |
G601R282601-1 | Adapter Assy - Gravity Defueling | 5 | |
G601R291004-25 | ADAPTER KIT- SAMPLING | 5 | |
G601R321102-1 | WRENCH ADAPTER - MLG PINTLE PIN NUT | 6 | |
G601R361201-1 | KIT - INLET ADAPTER 14TH STAGE | 1 | |
G601R361301-1 | KIT - 10TH STAGE SHOP AIR ADAPTER | 2 | |
G601R521104-1 | ADAPTER - BAGGAGE DOOR HANDLE TORQUE WRENCH | 7 | |
G601R521104−1 | ADAPTER - CABIN DOOR TORQUE | 7 | |
G601R521118-1 | ADAPTER - PASSENGER DOOR EXTERNAL HANDLE | 4 | |
G601R522201-1 | Torque Adapter - Pilot?S Hatch Handle (Inside) | 4 | |
G601R522202-1 | Torque Adapter - Pilot?S Hatch Handle (Outside) | 6 | |
G601R783003-1 | ADAPTER - BLEED AIR THRUST REVERSER ACTIVATION | 1 | |
G604-281203-1 | Kit - Fuel Shroud Drain Adapter | 3 | |
G604-783015-1 | Adapter - Bleed Air Thrust Reverser | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G670-281102-1 | ADAPTER - FUEL TANK VENTING | 3 | |
G670-281102−1 | ADAPTER - FUEL TANK VENTING | 3 | |
G670281102-1 | ADAPTER - FUEL TANK VENTING | 3 | |
G670281103-1 | Adapter - Inboard Fuel Tank Venting | 3 | |
G670301106-1 | ADAPTER - COWL ANTI-ICE DUCT | 4 | |
G700-121205-1 | Adapter - Nlg Servicing | 4 | |
G700-521108-1 | Kit - Cabin Door Torque Adapter | 2 | |
G71024 | ADAPTER EQUIPMENT -0 FAN THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G71024-1 | ADAPTER EQPT - T/R | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G71039-1 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G71039-44 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G76002-19 | Adapter - Protractor - Thrust Reverser Levers, Digital Readout | 12 | |
G77002 | ADAPTER -0 PT2 PROBE, EPR SYSTEM LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G77002-1 | Adapter-pt2 probe,epr system leak test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G78005 | ADAPTER-THRUST REVERSER HOLD OPEN ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G78005-10 | ADAPTER - THRUST REVERSER | 9 | |
G83-1700AB | ADAPTER FOR 99-3714 | 1 | |
GA-2 | ADAPTER - GAGE P39 PUMP | 2 | |
GAF2A | ADAPTER 3/8 - 1/2 | 3 | |
GB455-002-000 | 5/16"-32 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GBO30-010-300 | ADAPTER-FOR LOADCELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GFATIE | ADAPTER SOCKET 1/4-3/8 | 1 | |
GG0570003-003 | PADS-JACKING, ADAPTER ASSY WING/FUSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GLA124A | ADAPTER 1"-3/4 | 5 | |
GLA12B | ADAPTER 1/2 - 3/4 | 5 | |
GLA72A | SnapOn 3/4- 1" Drive Ind Finish Socket Extension Adapter | 4 | |
GP000973 | ADAPTER-TORQUE WRENCH VALVE TO CYLINDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GRAY4215 | ADAPTER 3/8- 1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS10258 | ADAPTER-DOME TEST | 1 | |
GS10357 | ADAPTER-SUMP ANNULUS LINE | 1 | |
GS10767 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS10767-1 | ADAPTER - TORQUE WRENCH | 1 | |
GS11839-1 | ADAPTER PRESSURE PICK-UP | 1 | |
GS11865 | PULLER - SHAFT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS11881 | ADAPTER - MAIN AND SCAVENGE PUMP TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS11882 | ADAPTER - SCAVENGE PUMP OUTLET PORT TEST PLUG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GS13237-1 | ADAPTER-ACM FLOW CONTROL VALVE | 3 | |
GS15047-1 | ADAPTER TEST PRESS RELIEF +TLAKOMER -30 INHG | 12 | |
GS15194-1 | ADAPTER - TORQUE WRENCH | 1 | |
GS15995-1 | ADAPTER - TORQUE WRENCH | 2 | |
GS18298-1 | WITH GS18300-1 ADAPTER KIT DURING PROPELLER BALANCING | 5 | |
GS19518-1 | ADAPTER, HYDRAULIC TEST-C-130 | 1 | |
GS20782-1 | ADAPTER - TORQUE WRENCH | 10 | |
GS20931-1 | Two-Way Solenoid Torque Adapter | 2 | |
GS20932-1 | Three-Way Solenoid Torque Adapter | 2 | |
GS20965-1 | ADAPTER-TRANSPORT PROPELE | 5 | |
GS23424-1 | PROPELLER FLANGE-ADAPTER | 3 | |
GS26802-1 | TORQUE ADAPTER - BALANCE NUT | 2 | |
GSAF1F | ADAPTER 1/2" INT - 3/8" EXT DR | 4 | |
GSB0700007 | ADAPTER -JACK, FRONT FUSELAGE | 5 | |
GSB0700017 | WING ADAPTERS - JACK | 2 | |
GSB0800002 | KIT-NOSE AND MAIN WHEEL MEASURING ADAPTER | 1 | |
GSB0800003 | ADAPTER - MAIN WHEEL MEASURING | 4 | |
GSB1210012 | KIT-OXYGEN CHARGING ADAPTER | 2 | |
GSB2750001 | ADAPTER-RIGHT ANGLE DRIVE | 1 | |
GSB2840002 | ADAPTER CABLE SET FOR D8-400 FUEL QUANTITY TEST | 1 | |
GSB2840008A | ADAPTER CABLE SET FOR D8-400 FUEL QTY TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2840008B | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, EXTENDED RANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB2840008C | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, STANDARD RANGE | 2 | |
GSB2840008D | SET - HARNESS ADAPTER Q100, 200, 300, IMPERIAL, EXTENDED RANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSB3242004 | SPIN-UP ADAPTER | 4 | |
GSB3242005 | ADAPTER-BRAKE ANTI-SKID TESTER | 1 | |
GSB3411009 | KIT-PITOT STATIC TEST ADAPTER | 3 | |
GSB3411012 | KIT-SERIES Q400 PITOT/STATIC PRESSURE TEST ADAPTER | 1 | |
GSB3411013 | KIT-DASH 8 100-400 PITOT/STATIC PRESSURE TEST ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE 279 | ADAPTERS SET - TEST, PNEUMATIC SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE 464 | ADAPTER LEFT-HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE 465 | ADAPTER RIGHT-HAND, ASSY. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE 52X-11-08 | KIT - CABIN DOOR TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE-064 | ADAPTER-FLAP FLEXIBLE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE148 | ADAPTER - TORQUE, WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE158 | ENGINE ADAPTER - COMPRESSOR CLEANING CAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE159 | TOOL - SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE164 | ADAPTER-LIFTING ENGINE ASSY P/N23055299 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE168 | ADAPTER-AFT ENGINEHANDLING P/N 23055758 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE169 | ADAPTER-AFT ENGINELIFTING P/N 23055759 | 1 | |
GSE234 | SPLINE ADAPTER - TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE464 | ADAPTER LEFT-HAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE465 | ADAPTER RIGHT-HAND, ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSRS15-16 | ADAPTER - TORQUE WRENCH RUDDER PCU INSTA | 4 | |
GUC232A | USB ADAPTER TO SERIES RS-232 | 1 | |
H207294-1 | ADAPTER - FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207295-1 | ADAPTER - FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207423-1 | ADAPTER - OIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207425-1 | ADAPTER - FUEL PRESSURE TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207427-1 | ADAPTER - OIL PRESSURE TRANSDUCER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207428-1 | ADAPTER - FUEL RETURN PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H207454-1 | ADAPTER - OIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H21969 | TOOL-ADAPTER | 8 | |
H46828 | ADAPTER-NGL WHL AXLE NUT | 19 | |
H46838 | ADAPTER-MLG AXLE NUT (ATR) | 14 | |
H47026 | NLG CHARGE ADAPTER - HAND LEVER | 4 | |
H47682 | ADAPTER - MLG A321 | 41 | |
HA1601-005 | ADAPTER WITH GAGE 0-25BAR, INFLATION OF PRESSURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HC130H0014-000 | ADAPTER-TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HC130H0029-000 | ADAPTER-TORQUE(MLG) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HC132H0006-000 | JACKING ADAPTER-MAIN | 4 | |
HE50844Z53 | KEY - ADAPTER BAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HE50844Z54 | ELEMENT KEY - ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HGPU50-30-1S | HYDRAULIC GROUND POWER UNIT WITH : -OPTION- H; - OPTION-S; -ACCESSORY- 04 ; - ADAPTER HOSE KIT-B737 CLASSIC. | 2 | |
HM0917275 | ADAPTER-R/1,DRAGBRACE,MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HOA-6L | ADAPTER-OFFSET | 1 | |
HOV4650211 | ADAPTER - CHARGING SHOCK STRUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HP-6000-1 | H150 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
HP-6000-10 | H150 LIFT ADAPTER - B47 - STD GEAR | 1 | |
HP-6000-11 | H250 LIFT ADAPTER - B204/AH-1 | 1 | |
HP-6000-12 | H200/250 LIFT ADAPTER - H135/EC135 - LOW GEAR | 1 | |
HP-6000-13 | H200/250 LIFT ADAPTER - H135/EC135 - HIGH GEAR | 1 | |
HP-6000-14 | H150 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
HP-6000-15 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR | 1 | |
HP-6000-16 | H250 LIFT ADAPTER - MD900 | 1 | |
HP-6000-17 | H200/250 LIFT ADAPTER - B427 - LOW GEAR W/O CABLE CUTTERS | 1 | |
HP-6000-18 | H200/250 LIFT ADAPTER - B427 - HIGH GEAR | 1 | |
HP-6000-19 | H200/250 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
HP-6000-2 | H150 LIFT ADAPTER - B206A/B - LOW GEAR | 1 | |
HP-6000-20 | H250 LIFT ADAPTER - B430 | 1 | |
HP-6000-21 | H150 LIFT ADAPTER - H125/AS350 - HIGH GEAR | 1 | |
HP-6000-22 | H150 LIFT ADAPTER - H125/AS350 - LOW GEAR | 1 | |
HP-6000-24 | H250 LIFT ADAPTER - BO105 | 1 | |
HP-6000-25 | H250 LIFT ADAPTER - BK117 | 1 | |
HP-6000-26 | H200/250 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
HP-6000-27 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - LOW GEAR | 1 | |
HP-6000-28 | H150/200/250 LIFT ADAPTER - OH-58 - HIGH GEAR | 1 | |
HP-6000-29 | H150 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
HP-6000-3 | H150/200/250 LIFT ADAPTER - B206L - FLOAT COMP. | 1 | |
HP-6000-31 | H200/250 LIFT ADAPTER - H120/EC120 | 1 | |
HP-6000-32 | LIFT ADAPTER R-44 | 1 | |
HP-6000-33 | LIFT ADAPTER R-22, H100 | 1 | |
HP-6000-36 | H150 LIFT ADAPTER - OH-58 - LOW GEAR | 1 | |
HP-6000-37 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - HIGH GEAR | 1 | |
HP-6000-38 | LIFT ADAPTER R-22 | 1 | |
HP-6000-39 | H150 LIFT ADAPTER - AIRPLANE MOD. | 1 | |
HP-6000-4 | H150 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
HP-6000-41 | H250 LIFT ADAPTER - UH-1H - LOW GEAR | 1 | |
HP-6000-42 | H250 LIFT ADAPTER - AW119 | 1 | |
HP-6000-44 | H250 LIFT ADAPTER - UH-1H - HIGH GEAR | 1 | |
HP-6000-47 | H250 LIFT ADAPTER - H145/EC145 | 1 | |
HP-6000-48 | H200/250 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
HP-6000-49 | H150 LIFT ADAPTER - ENSTROM F-28 | 1 | |
HP-6000-50 | H150 LIFT ADAPTER - ENSTROM F-480 | 1 | |
HP-6000-56 | H250 LIFT ADAPTER - AH-1 | 1 | |
HP-6000-58D | H200 LIFT ADAPTER - OH-58D - HIGH GEAR | 1 | |
HP-6000-61 | H150 LIFT ADAPTER - B47 - HIGH GEAR | 1 | |
HP-6000-62 | H200/250 LIFT ADAPTER - H135/EC135 - MID GEAR (METRO) | 1 | |
HP-6000-63 | H250 LIFT ADAPTER - UH-72 LAKOTA | 1 | |
HP-6000-68 | H200/250 LIFT ADAPTER - B206B - FLOAT COMP. | 1 | |
HP-6000-69 | H150 LIFT ADAPTER - SCHWEIZER S269/300 | 1 | |
HP-6000-7 | H250 LIFT ADAPTER - B222/230 | 1 | |
HP-6000-70 | H150 LIFT ADAPTER - R22 | 1 | |
HP-6000-71 | H150 LIFT ADAPTER - R44 | 1 | |
HP-6000-72 | LIFT ADAPTER MQ-8C | 1 | |
HP-6000-74 | H200/250 LIFT ADAPTER - H130/EC130 | 1 | |
HP-6000-75 | H150 LIFT ADAPTER - B505 - STD GEAR | 1 | |
HP-6000-78 | H150 LIFT ADAPTER - B505 - HIGH GEAR | 1 | |
HP-6000-8 | H250 LIFT ADAPTER - B212/412 | 1 | |
HS1009KD | ADAPTER JACK - SAFETY JACKING // TAIL JACK (ØA = 24.5) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS7168 | ADAPTER-PORT | 1 | |
HS7605 | ADAPTER - TEST, HYDRAULIC | 1 | |
HS7625 | ADAPTER-DRAIN, TEST FIXTURE | 1 | |
HS8238 | ADAPTER - PORT | 1 | |
HS8544 | ADAPTER - HYDRAULIC TEST | 1 | |
HS8545 | ADAPTER - HYDRAULIC TEST | 1 | |
HS9000 | ADAPTER - TORQUE WRENCH | 2 | |
HS9234 | ADAPTER-MOUNTING ACTUA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HS9577 | ADAPTER-HYDRAULIC | 1 | |
HS9585 | ADAPTER-TORQUE WRENCH | 1 | |
HS9830 | ADAPTER - CONTROL FLUSHING | 2 | |
HS9836 | ADAPTER - PLATE | 1 | |
HSA1063 | UNI-TABS, WELDING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU 55761 | ADAPTER - BOOTSTRAP | 13 | |
HU-5 | ENGINE STAND ADAPTER - RB211 | 1 | |
HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU22699 | ADAPTER - BEARING, L.P. TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU28499 | EXTRACTOR - ADAPTER | 2 | |
HU28707 | End-drive adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU28783-2 | Adapter - Fan Hub to Sling Frame - RB211-535E4 Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU29623 | ADAPTER-INHIBITING PUMP CART, ENGINE FUEL SYSTEM RB211-535 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU31811 | ADAPTER-INHIBITING PUMP CART, ENGINE FUEL SYSTEM RB211-535 ENGINES | 2 | |
HU32563 | ADAPTER - LIFTING, LP COMPRESSOR DISC | 1 | |
HU35451 | ADAPTER- EXTRACTOR NOSE SPINNER | 9 | |
HU37594 | ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 13 | |
HU39652 | SPL-2357 EXTRACTOR - ADAPTER | 4 | |
HU40025 | ADAPTER - ROTATE HP SYSTEM, BREATHER ROTOR | 14 | |
HU41100 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU41384 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU41791 | ADAPTER, CONNECTOR - INHIBITING FUEL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU44807 | ADAPTER-LIFTING SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU44819 | ADAPTER - CHOCKING PAD AND SLIDER, REMOVAL | 9 | |
HU50307 | ADAPTER - EXTRACTOR | 2 | |
HU50307-1 | Extractor - Adapter, VSV Actuator | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU50397-1 | Adapter-REM/INST 31 Module | 1 | |
HU50458 | ADAPTER - EXTRACT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU51166 | ADAPTER, EXTRACTOR - BORESCOPE PLUGS HP | 5 | |
HU55072-1 | ADAPTER-LIFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55073-1 | ADAPTER-FANCASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55076 | ADAPTER-R/I PNEUMATIC STARTER | 4 | |
HU55177 | ADAPTER-TROLLEY RI IDG | 1 | |
HU55178 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
HU55178-2 | ADAPTER - TROLLEY, PNEUMATIC STARTER, INSTALL/REMOVAL | 4 | |
HU55178-2 | ADAPTER-R I PNEUMATIC STARTER | 4 | |
HU55178-3 | ADAPTER-R I PNEUMATIC STARTER | 6 | |
HU55181 | SPRUNGADAPTER-RIEXTERNALGEARBOXMODU | 1 | |
HU55181-1 | ADAPTER-SPRING INSTALL /REMOVE HS GEARBOX | 6 | |
HU55183 | PLATE, ADAPTER - R I PNEUMATIC STARTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55330 | ADAPTER-R I PNEUMATIC STARTER | 1 | |
HU55330-1 | ADAPTER - SUPPORT GEARBOX CRADLE. | 8 | |
HU55338-1 | ADAPTER - FAN & NOSE COWL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55368-3 | KIT - ADAPTER, REMOTE STATION RESCUE | 2 | |
HU55384 | ADAPTER-FAN CASE NOSE COWL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55436 | ADAPTER-TROLLEY RI IDG | 1 | |
HU55436-2 | ADAPTER-TROLLEY R/I IDG | 10 | |
HU55437-2 | ADAPTER -PSITIONER INSTALL/ REMOVE ,LP FUEL PUMP | 10 | |
HU55676 | ADAPTER - ENGINE BUILD STAND, INTERMEDIATE CASE (STARBOARD SIDE) | 4 | |
HU55677 | ADAPTER -ENGINE BUILD STAND,INTERMEDIATE CASE(PORT SIDE) | 4 | |
HU55690 | ADAPTER-R I PNEUMATIC STARTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55736 | ADAPTER-TROLLEY R/I IDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU55736-1 | ADAPTER ADAPTER -0 TROLLEY,REM. INST. | 2 | |
HU55761 | ADAPTER - BOOTSTRAP | 13 | |
HU55989 | PLATE ADAPTER - R I GEARBOX UNITS | 5 | |
HU55990 | ADAPTER-POSITIONER R I FUEL PUMP | 2 | |
HU56215 | ADAPTER-FIXTURE ON GEARBOX TROLLEY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU56216 | ADAPTER-TROLLEY JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU56216-2 | ADAPTER-TROLLEY JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU56217 | ADAPTER-JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU56217-1 | ADAPTER-JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU56522 | ADAPTER, LIFTING - FAN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU80277 | ADAPTER - CONNECTOR, INHIBITING FUEL SYSTEM | 6 | |
HU80280 | ADAPTER - BRITISH THREAD FOR LP FUEL INLET PIPE 777-200ER, -300 | 1 | |
HU80281 | ADAPTER - AMERICAN THREAD 777-200ER, -300 | 1 | |
HU80617-2 | ADAPTER-R/I LP COMPRESSOR DISK/BLADES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HX292A | ADAPTER-WAVEGUIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
I-580-90 | ADAPTER-90 ANGLE VIEWING_[I-580-90] | 1 | |
IAE1F10023 | Adapter,handling-gearbox | 8 | |
IAE1F10039 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1J12000 | ENGINE ATTACH ADAPTER - LIFTING BRACKET | 9 | |
IAE1J12007 | ADAPTER - SLING | 9 | |
IAE1J12018 | ADAPTER-WRENCH SPECIAL | 6 | |
IAE1J12104 | ADAPTER-SLING | 6 | |
IAE1J12303 | ADAPTER, HANDLING - ENGINE ASSY, DISK STG. 1.5-2.5 LPC ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20012 | ADAPTER-TORQUE TOOL | 12 | |
IAE1N20023 | ADAPTER-TORQUE TOOL | 16 | |
IAE1N20023 (ALT : RSE1234) | ADAPTER-TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20023_AAR | ADAPTER-TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20036 | TORQUE ADAPTER; MD-90 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20054 | TORQUE ADAPTER;MD-90 | 4 | |
IAE1N20417 | ADAPTER - PRESSURIZING. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20418 | ADAPTER - BLANKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1N20419 | ADAPTER-PRESSURISING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1P16042 | Adapter,leak check-engine assy,fuel manifold at distribution valve | 13 | |
IAE1P16205 | ADAPTER -AIR /OIL SYSTEM CHECK | 6 | |
IAE1P16486 | Adapter,anti-torque pma drive gear retaining nut | 3 | |
IAE1R18685 | ADAPTER - INHIBITING RIG | 17 | |
IAE2F10367 | ADAPTER - AIRFLOW TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE2F10411 | ADAPTER - VACUUM TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE2R19427 | ADAPTER-TORQUE TOOL | 4 | |
IAE4P16228 | ADAPTER-HOSE | 5 | |
IAS-2300-01 | DRAIN-FILL NOZZLE ADAPTER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IFR 4000 | ADAPTER - COAX (TNC TO BNC) | 31 | |
IFR 6000 | ADAPTER - TNC FEMALE TO N MALE | 27 | |
IPEH-002021-QM | CAN-USB ADAPTER QM | 1 | |
IPPLP4103-8 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT MS14103-8 BEARINGS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IR224UN-LN96 | USB INTERFACE RAW-IR ADAPTER | 1 | |
IR650 | ADAPTER - IMEXTOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J10007-4 | ADAPTER-ENGINE BALLAST | 1 | |
J10007-56 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 CF6-80C2) | 1 | |
J10007-57 | ADAPTER-ENGINE BALLAST | 1 | |
J10007-58 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 RB211) | 1 | |
J10007-60 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT | 2 | |
J12007-1 | ADAPTER - NOSE LANDING GEAR UPPER CHAMBER | 5 | |
J12007-2 | ADAPTER - NOSE LANDING GEAR STRUT SERVICING | 2 | |
J20001-40 | HOIST-LRU,MAIN EE BAY(ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J20009-132 | ADAPTER - HOIST, AIR CONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J20009-133 | ADAPTER - HEAT EXCHANGER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J20009-136 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC 777-200ER, -200F, | 8 | |
J20009-140 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 2 | |
J20009-50 | ADAPTER- LOAD POSITIONER. | 12 | |
J20009-64 | ADAPTER ASSEMBLY - TELESCOPING HYDRAULIC 777-200ER, -200F, | 5 | |
J20009-68 | ADAPTER - CRADLE, INTERFACE | 14 | |
J20009-70 | CRADLE ADAPTER - JACKING EQPT, HYDRAULIC TELESCOPING - 757/767 | 5 | |
J20009-88 | Cradle Adapter - Jacking Equipment | 7 | |
J20011-1 | INTERFACE ADAPTER - GE FLOOR HOIST, LRU | 7 | |
J20089-68 | ADAPTER ASSEMBLY-TELESCOPING HYDRAULIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J21001 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 1 | |
J21001-132 | HOIST ADAPTER EQPT - A/C PACK | 7 | |
J21001-132 | ADAPTER - HOIST, AIR CONDITIONING PACK | 7 | |
J21001-133 | HOIST ADAPTER EQUIPMENT SET - AIR COND PACK 777 | 5 | |
J21001-133 | ADAPTER - HOIST, AIR CONDITIONING PACK | 5 | |
J21001-134 | Adapter - Fishpole Hoist | 6 | |
J21001-136 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
J21001-137 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 3 | |
J21001-138 | HOIST ADAPTER EQPT - AIR CONDITIONING PACK | 4 | |
J21001-154 | JACKING/HOIST ADAPTER-EQUIP ACM | 4 | |
J21001-156 | ADAPTER - HOIST, AIR CONDITIONING PACK | 2 | |
J21001-3 | Hoist Adapter Equipment -Air Conditioning Pack | 2 | |
J21001-72 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK | 1 | |
J21001-73 | ADAPTER - HOIST, AIR CONDITIONING PACK | 2 | |
J21001-74 | ADAPTER - HEAT EXCHANGER | 1 | |
J21001-79 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 4 | |
J21001-80 | ADAPTER - HOIST, AIR CONDITIONING PACK | 6 | |
J21001-81 | Hoist Adapter Equipment -Air Conditioning Pack | 2 | |
J21001-81-M | FISHPOLE ADAPTER EQPT, MFD PARTS FOR -81 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J21001-82 | 4. ADAPTER - HEAT EXCHANGER | 4 | |
J21001-83 | 4. ADAPTER - CONDENSER/REHEATER | 1 | |
J21001-84 | 3. ADAPTER - AIR CYCLE MACHINE | 1 | |
J21001-88 | HOIST ADAPTER EQPT -0 ARM | 1 | |
J21001-89 | HOIST ADAPTER EQPT -0 ARM | 4 | |
J21001-90 | HOIST ADAPTER EQPT -0 | 1 | |
J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT, A/ | 6 | |
J21007-1 | ADAPTER EQUIPMENT - | 2 | |
J21007-26 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE, BOOM HOIST (CE) | 4 | |
J21007-31 | Adapter Equipment -Adjustable Angle. Boom Hoist (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23001 | HOIST ADAPTER-SATCOM TOP-MOUNTED HIGH GAIN ANTENNA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23001-1 | HOIST ADAPTER - SATELLITE COMMUNICATIONS (SATCOM) TOP-MOUNTED HIGH GAIN ANTENNA (CE) | 2 | |
J23001-12 | HOIST ADAPTER - SATCOM TOP - MOUNTED HIGH GAIN ANTENNA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23001-12-HM | HYDRO MFD PARTS-HOIST ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23001-26 | HOIST ADAPTER - SATCOM, TOP-MOUNTED HIGH GAIN ANTENNA | 5 | |
J23001-27 | HOIST ADAPTER - SATCOM, TOP-MOUNTED HIGH GAIN ANTENNA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23002 | ADAPTER EQPT-HOIST,CROWN ZONE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J23002-1 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE | 4 | |
J23002-16 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE | 7 | |
J24001-43 | Hoist Adapter -Variable Speed Constant Frequency (Vscf) (Pw/Ge/Rr Engines) | 6 | |
J24001-50 | HOIST ADAPTER - VARIABLE (VSCF) (PW/GE/RR ) | 10 | |
J24002 | HOIST ADAPTER-IDG(PW/GE/RR ENGINES) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J24002-73 | Hoist Adapter -Idg (Pw/Ge/Rr Engines) | 6 | |
J24018-1 | HOIST ADAPTER - IDG | 6 | |
J24018-49 | HOIST ADAPTER - IDG | 5 | |
J24019-1 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 6 | |
J24019-2 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J24019-3 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
J25011 | ADAPTER EQPT-OFAR/OFCR MODULE RMVL/INSTL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J25011-1 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 2 | |
J25011-64 | ADAPTER EQPT-OFAR/OFCR MODULE,RMVL/INSTL | 3 | |
J25011-68 | ADAPTER EQUIPMENT - OFAR / OFCR MODULE | 4 | |
J26004-49 | ADAPTER CABLE - TEST EQUIPMENT, FIRE EXTINGUISHING SYSTEM (CARGO/LLAR) | 6 | |
J27003-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, L.E. SLAT | 9 | |
J27003-2 | DRIVE ADAPTER -TORQUE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27010 | ADAPTER-CONTROL WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27010-34 | ADAPTER - CONTROL WH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27010-44 | ADAPTER - CONTROL WH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27010-56 | ADAPTER - CONTROL WHEEL | 7 | |
J27015-1 | SPLINE ADAPTER - LEADING EDGE/TRAILING EDGE POWER DRIVE UNIT, MANUAL DRIVE | 7 | |
J27021-1 | ADAPTER - DRIVE, T. | 10 | |
J27022 | ADAPTER-TORQUE,SLAT PINION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27022-1 | ADAPTER - TORQUE, SLAT PINION | 8 | |
J27030-29 | ADAPTER ASSY - RIGGI | 8 | |
J27035-41 | LOCK EQPT-ADAPTER | 2 | |
J27052 | ADAPTER-SIDE GUST SUPPRESSION LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27052-1 | Adapter -Side Gust Suppression Leak Test | 10 | |
J27066-1 | ADAPTER EQPT - FIXT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J27072-1 | ADAPTER - TEST, SARD | 11 | |
J27078-1 | DRIVE ADAPTER EQUIPMENT - ACTUATOR THS TRIM | 10 | |
J27083-1 | Adapter Cable - Tester, Flap | 2 | |
J28002-1 | ADAPTER DE-FUEL | 4 | |
J28007-10 | Adapter Assy - Pressurization Eqpt | 1 | |
J28007-11 | Adapter Assy - Pressurization Eqpt | 4 | |
J28014-1 | ADAPTER EQUIPMENT - FUEL SUMP DRAIN VLAVE | 2 | |
J28017-1 | ADAPTER EQUIPMENT - DRY BAY PRESSURIZATION WING | 5 | |
J29003-72 | HOIST ADAPTER - AIR DRIVEN PUMP (ADP) REMOVAL/INSTALLATION | 5 | |
J29003-85 | HOIST ADAPTER - AIR DRIVEN PUMP (ADP) REM/INS | 6 | |
J29003-93 | HOST ADAPTER - AIR DRIVEN PUMP AIR FLOW CUP - LOW/HIGH BLOW TEST (ADP) REMOVAL / INSTALLATION | 7 | |
J29007-1 | HOIST ADAPTER-ENGINE DRIVEN PUMP | 5 | |
J29007-2 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 2 | |
J29007-3 | HOIST ADAPTER - ENGINE DRIVEN PUMP LEADING EDGE SLATS | 2 | |
J30002-1 | ADAPTER CABLE - PMAT(PORTABLE MAINTENANCE ACCESS TERMINAL) TO RJ-45 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32025-1 | HOIST ADAPTER EQUIPMENT - NLG DRAG STRUT, REMOVAL/INSTALLATION | 6 | |
J32025-29 | Hoist adapter eqpt-NLG drag strut,rmvl/instl | 3 | |
J32032 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 3 | |
J32032-19 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 9 | |
J32032-22 | ADAPTER-WRENCH | 22 | |
J32032-23 | ADAPTER ASSEMBLY - LDG WHEEL RETAINING NUT WRENCH | 10 | |
J32037-106 | ASSEMBLY - WRENCH ADAPTER | 19 | |
J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
J32055-10 | ADAPTER -0 WELDMENT | 1 | |
J32055-11 | ADAPTER -0 WELDMENT | 1 | |
J32055-14 | ADAPTER -0 WELDMENT | 1 | |
J32055-22 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-24 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
J32055-34 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-36 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-38 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-43 | SOCKET -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J32055-50 | Torque adapter set-landing gear components | 8 | |
J32055-61 | TORQUE ADAPTER SET - | 6 | |
J32055-7 | ADAPTER -0 WELDMENT | 1 | |
J32055-8 | ADAPTER -0 WELDMENT | 1 | |
J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
J32055-9 | ADAPTER -0 WELDMENT | 1 | |
J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J34002-19 | Adapter-sump drain valve,rem/instl | 18 | |
J45002-1 | Adapter Cable -Pmat To Rj-45 | 2 | |
J47548-2 | PROTECTOR ADAPTER-NLG (A320) | 9 | |
J47549 | Adapter-NLG | 40 | |
J47565 | Adapter-NLG Shock Absorbe | 15 | |
J49005-1 | JACKING ADAPTER - APU CRADLE | 3 | |
J51005-1 | Installation/Removal Adapter - Fuselage Drain Valv | 4 | |
J51005-7 | ADAPTER-DRAIN VALVE | 9 | |
J54005 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL | 1 | |
J54005-1 | Hoist Adapter -Diagonal Brace. Remove/Install | 2 | |
J54005-1-M | HOIST ADAPTER-BRACE DIAGONAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J54005-32 | Hoist Adapter - Diagnal Brace R/I | 4 | |
J54005-51 | HOIST ADAPTER - DIAGONAL BRACE, REMOVE/INSTALL (CE) | 2 | |
J71013-1 | ADAPTER EQUIPMENT - STABILIZATION, PRATT & WHITNEY ENGINE MOUNT | 2 | |
J71013-22 | ADAPTER EQUIPMENT - STABILIZATION, PW4084 ENGINE M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J71013-25 | Adapter Equipment - Stabilizer. PW2000 Mounts | 7 | |
J71013-44 | Adapter eqpt-stabilization,PW engine mounts | 3 | |
J71013-44-HM | HYDRO MFD PARTS-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J71037-1 | Adapter assembly-stabilization rr aft engine mount | 10 | |
J71037-1-HM | HYDRO MFD PARTS -0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JCIPSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
JHWX-20C | 1 DR ADAPTER FOR X-20B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-1152 | ADAPTER FOR PT-6A ENGINE | 6 | |
K-1243 | ADAPTER KIT-ENGINE COMP WASHER | 5 | |
K-1285 | ADAPTER KIT - PRESSURIZATION TEST KIT | 6 | |
K-1288 | TRONAIR K-1288 – CPU ADAPTER KIT FOR SELECT CESSNA CITATION AIRCRAFT | 3 | |
K-1357 | TRONAIR K-1357 SAAB 340 COMPRESSOR WASHER ADAPTER | 4 | |
K-1710 | TRONAIR K-1710 BOMBARDIER CANADAIR CHALLENGER & CRJ100 COMPRESSOR WASHER ADAPTER | 5 | |
K-1953 | ADAPTER KIT -ROLLS-ROYCE (ALLISON) | 4 | |
K-2032 | ADAPTER KIT (FJ44-1A) | 5 | |
K-2114 | Kit, Cj-610 Engine Adapter (P) | 2 | |
K-2115 | ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 STAND (TRONAIR) | 6 | |
K-2248 | TRONAIR K-2248 GENERAL ELECTRIC CFM56 COMPRESSOR WASHER ADAPTER | 7 | |
K-2411 | ADAPTER-POTABLE WATER | 10 | |
K-2601 | TRONAIR K-2601 – AIRCRAFT CABIN PRESSURIZATION UNIT ADAPTER KIT – CESSNA, JETSTREAM, & IAI ASTRA | 4 | |
K-2685 | ADAPTER KIT (PW350-A) BRAVO | 4 | |
K-2714 | KIT: WASHER ADAPTER, DASH 8 -100,-300: AU/NZ | 4 | |
K-2717 | KIT-OXYGEN CHARGING ADAPTER | 6 | |
K-2730 | MAIN GEAR AXLE JACK ADAPTER (02-7833-0110) | 1 | |
K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-2733-02 | KIT,DASH 8-400 NLG ADAPTER (P) | 3 | |
K-2734-02 | KIT,DASH 8-400 MLG ADAPTER (P) | 5 | |
K-2769 | KIT, PW-545A ADAPTER CE | 4 | |
K-2770 | ADAPTER KIT (TFE 731 1-5) | 4 | |
K-2808 | ADAPTER KIT (TFE 731-20) | 3 | |
K-3025 | ADAPTER-BRAKE (ANTI-SKID TESTER) | 8 | |
K-3803 | Engine Compressor Washer Adapter Kit - Challenger 300 | 4 | |
K-3861 | KIT: ADAPTER,TFE-731-60, | 1 | |
K-4055 | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | 2 | |
K-4056 | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | 2 | |
K-4123 | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | 1 | |
K-4229 | KIT, NOSE ADAPTER ASS'Y - INCLUDED WITH 02-7818C0110 AXLE JACK | 4 | |
K-4281 | ADAPTER - PRESSURIZATION TEST, CABIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K-4500 | TRONAIR K-4500 EUROCOPTER COMPRESSOR WASHER ADAPTER | 4 | |
K-5062 | ADAPTER, FWD BAT-TERY LIFT | 2 | |
K1134100-500 | ADAPTER - FLUSHING, | 1 | |
K1134100-500 1134100-501 | ADAPTER - FLUSHING, EVAPORATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K1710 | ADAPTER KIT- MOTOR WATER WASH UNIT | 5 | |
K20001-1 | Hoist Adapter - Forward EE Bay LRU's | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K20008-1 | Hoist Adapter Kit - Aft EE Bay LRU's | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K2012 | ADAPTER-ENGINE LIFT | 6 | |
K21003-67 | K21003-67 PECS/ICS PUMP R&R ADAPTER | 10 | |
K21004 | ADAPTER EQUIPMENT-HEAT EXCHANGER CLUSTER REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21004-1 | Adapter Equipment -Heat Exchanger Cluster. Removal And Installation (Ce) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21004-40 | Adapter Eqpt - Heat Exchanger Cluster 787-9 | 4 | |
K21004-72 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 8 | |
K21004-79 | ADAPTER ASSEMBLY - JACK, HEAT EXCHANGER CLUSTER, AC PACK | 2 | |
K21004-84 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21004-85 | ADAPTER EQUIPMENT - HEAT EXCHANGER CLUSTER, REMOVAL AND INSTALLATION | 4 | |
K21006 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-1 | Jack Adapter - Cabin Air Compressor, AC Pack | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-11 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-12 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | 1 | |
K21006-13 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-26 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-27 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-36 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-40 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-41 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-46 | Jack Adapter -Air Compressor. Air Conditioning Pack (Ce) | 3 | |
K21006-47 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-48 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-49 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-5 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-51 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-52 | JACK ADAPTER-AIR COMPRESSOR,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21006-53 | JACK ADAPTER - AIR COMPRESSOR, AIR CONDITIONING PACK (CE) | 9 | |
K21006-53 | JACK ADAPTER-AIR COMPRESSOR,ACPACK | 9 | |
K21008 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-1 | ADAPTER - JACK, AIR CYCLE MACHINE | 7 | |
K21008-1 | JACK ADAPTER-AIR CYCLE MACHINE,ACPACK | 7 | |
K21008-10 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-13 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-16 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-17 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | 2 | |
K21008-2 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-24 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-25 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-26 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-27 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-3 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-4 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-6 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-7 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-8 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21008-9 | JACK ADAPTER-AIR CYCLE MACHINE,AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21009-1 | Jack Adapter - Lower Recirculation Fan, AC Pack | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21010-1 | Jack Adapter - RAM Air Fan, AC Pack | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21010-45 | RAM AIR FAN,AC PACK-JACK ADAPTER | 3 | |
K21010-54 | RAM AIR FAN, AIR CONDITIONING PACK - JACK ADAPTER | 4 | |
K21011 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-1 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE JACK (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-11 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-15 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-20 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-21 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-22 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-23 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-26 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-28 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 2 | |
K21011-32 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-4 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-42 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-5 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-50 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-51 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-52 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | 1 | |
K21011-55 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-56 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-57 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-58 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-59 | ADAPTER - JACK, ADJUSTABLE ANGLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-6 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-60 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-61 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-62 | ADAPTER EQUIPMENT - ADJUSTABLE ANGLE JACK | 8 | |
K21011-63 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011-65 | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21011PLD | ADAPTER EQUIPMENT-ADJUSTABLE ANGLE,JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-1 | Jack Adapter -Condenser. Air Conditioning Pack. Removal And Installation (Ce) | 7 | |
K21014-1 | JACK ADAPTER-CONDENSER AC PACK,R&I | 7 | |
K21014-2 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-22 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-23 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-24 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-25 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-26 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-29 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-30 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-31 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-32 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-33 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-34 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-35 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-37 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-38 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-39 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-4 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-5 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-6 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-7 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21014-9 | JACK ADAPTER-CONDENSER,AC PACK, R&I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-1 29 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 10 | |
K21016-10 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-101 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-11 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-12 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-129 | KIT ADAPTER-LIQUID COOLING SYSTEM SERVICE | 10 | |
K21016-13 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-130 | KIT, ADAPTER - LIQUID COOLING SYSTEM SERVICE | 8 | |
K21016-136 | KIT ADAPTER-LIQUID COOLING SYSTEM SERVICE | 7 | |
K21016-137 | Kit- Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-14 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-15 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-155 | Kit, Adapter - Liquid Cooling System Service | 2 | |
K21016-16 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-17 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-2 | Kit - Adapter-Liquid Cooling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-20 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-3 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-4 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-5 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | 3 | |
K21016-55 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-6 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-64 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-7 | KIT,ADAPTER-LIQUIDCOOLINGSYSTEMSERVICE | 2 | |
K21016-8 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-81 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-82 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-83 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-9 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-92 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21016-93 | KIT,ADAPTER-LIQUID COOLING SYSTEM SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K21029-1 | ADAPTER - JACK, SECONDARY HEAT EXCHANGER | 3 | |
K21029-19 | Adapter-jack,secondary heat exchanger | 2 | |
K21030-1 | PAC ADAPTER-RAM AIR INLET | 1 | |
K23002-1 | ADAPTER CABLE - SRT | 3 | |
K24001 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-1 | Hoist adapter assy-VFSG(GE and RR) and ASG | 9 | |
K24001-1-REVE | ADAPTER - HOIST ASSEMBLY, VFSG (GE/RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-10 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-101 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-106 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-108 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-109 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-112 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-113 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-114 | HOIST ADAPTER ASSY - | 9 | |
K24001-118 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 10 | |
K24001-118-REVE | HOIST ADAPTER ASSY - RR VFSG RI | 1 | |
K24001-119 | Adapter - VFSG (GE Engine) | 8 | |
K24001-12 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-120 | HOIST ADAPTER ASSEMBLY - ASG | 9 | |
K24001-14 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-15 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-16 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-17 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-18 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-19 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-2 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 1 | |
K24001-20 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-21 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-22 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-23 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-24 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-25 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-26 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-3 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) | 2 | |
K24001-30 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-31 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-32 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-33 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-34 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-35 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-4 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 2 | |
K24001-40 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-43 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-49 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-5 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-51 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-52 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-53 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-54 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-55 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-58 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-59 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-60 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-61 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-64 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-65 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-69 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-7 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-74 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-75 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-77 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-78 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-79 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-8 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-80 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-81 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-84 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-86 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-88 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-89 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-90 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-91 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-92 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-93 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-94 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-96 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-97 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24001-98 | Hoist Adapter Assembly -Variable Frequency Starter Generator (Vfsg) (Ge And Rr) And Apu Starter Generator (Asg) (Ce) | 1 | |
K24001-99 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K24005-94 | HOIST ADAPTER - VFSG, RR ENGINE STAND | 8 | |
K24014-1 | ADAPTER CABLE - BATTERY GSE MAIN/APU BATTERY ENCLOSURE. | 4 | |
K2478 | ENGINE HOIST FORWARD SLING ADAPTER (560-0260 THRU 0538) | 2 | |
K25002 | Adapter Equipment -Overhead Flight Attendant Rest | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27001 | ADAPTER - LEADING EDGE / TRAILING EDGE PWR DRIVE U | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27002 | ADAPTER EQPT-TE GEARED ROTARY ACTUATOR,REMOVER/INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27002-83 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION | 1 | |
K27002-85 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 9 | |
K27002-97 | ADAPTER - TE GEARED ROTARY ACTUATOR, REMOVAL / INSTALLATION | 1 | |
K27003 | ADAPTER EQPT -0 AILERON PCU REMOVAL/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27003-1 | ADAPTER EQUIPMENT - AILERON POWER CONTROL UNIT REMOVAL/ INSTALLATION | 8 | |
K27003-1 | ADAPTER EQPT-AILERON PCUREMOVAL/INSTALLATION | 8 | |
K27007 | DRIVE ADAPTER - ACTU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-1 | Drive Adapter Equipment -Actuator. Horizontal Stabilizer Trim | 8 | |
K27007-2 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-4 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-5 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-6 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27007-7 | DRIVE ADAPTER-ACTUATOR,HORIZONTAL STABILIZER TRIM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27010-1 | ADAPTER EQUIP. - REM'L & INST'L HIGH LIFT HYDRAULI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27012 | DRIVE ADAPTER - TORQ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27012-1 | Drive Adapter - Torque Tube Coupling, LE Slat and | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27028 | SPLINE ADAPTER - LE/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K27028-1 | Spline Adapter - LE/TE Power Drive Unit, Manual Dr | 1 | |
K27030-95 | Adapter Equipment - Spline | 8 | |
K27068-10 | MEASURING TOOL - ENCODER CALIBRATION ADAPTER SET | 5 | |
K27069-1 | ADAPTER-TORQUE WRENCH NO BACK BRAKE | 6 | |
K2714 | KIT: WASHER ADAPTER, DASH 8 -100,-300: AU/NZ | 4 | |
K2717 | KIT-OXYGEN CHARGING ADAPTER | 6 | |
K28001-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE (ADAPTER) | 7 | |
K28004-30 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD | 6 | |
K29001 | ADAPTER EQPT -0 EMP REMOVAL/INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K29001-1 | Adapter Eqpt - Electric Motor Pump | 3 | |
K29001-60 | ADAPTER - EMP, REMOVAL / INSTALLATION | 7 | |
K29001-60 | ADAPTER EQPT-EMPREMOVAL/INSTALLATION | 7 | |
K29003-1 | ADAPTER - EDP SUPPLY HOSE HYDRAULIC, SPL-13651 | 5 | |
K29004-1 | ADAPTER - RESERVOIR | 1 | |
K29004-17 | ADAPTER - RESERVOIR STANDPIPE OPERATIONAL TEST | 5 | |
K29005-1 | JUMPER - RAT PLUG ADAPTER (DISPATCH) | 6 | |
K3025 | ADAPTER-BRAKE (ANTI-SKID TESTER) | 8 | |
K31001-1 | Adapter Cable - D38999 Receptacle To Interphone Jack | 9 | |
K32006 | HOIST ADAPTER EQPT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 4 | |
K32022-1 | Wheel Retention Nut Adapter Socket - NLG | 16 | |
K32034-1 | TORQUE ADAPTER - CONNECTOR, EBA | 8 | |
K32036-1 | Dispatch Equipment - Axle RDC (Remote Data Concentrator) Connector Covers Note: includes both Adapter Simulator Assy -4 orange for 787-8, and -5 yellow for 787-9 | 9 | |
K32036-2 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: ADAPTER SIMULATOR ASSY -4 IDENTIFIED AS ORAN | 7 | |
K32036-4 | ADAPTER SIMULATOR ASSY(MLG 787-8) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K32036-5 | ADAPTER SIMULATOR ASSY(MLG 787-9) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K4055SP | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K4056SP | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K4123SP | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K4187 | HEAD: ADAPTER KIT,500 SERIES, 01-1270-0010 ONLY | 2 | |
K52030 | ADAPTER -0 MANUAL DRIVE, LCD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K52030-1 | ADAPTER - MANUAL DRIVE, FORWARD AND AFT CARGO DOOR | 8 | |
K52030-2 | ADAPTER-MANUAL DRIVE,LCD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K52044-1 | ADAPTER - DRAIN VALV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003 | PROOF LOAD FIXTURE ADAPTER -0 BOOTSTRAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-1 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-65 | Proof Load Fixture Adapter -Bootstrap Equipment | 3 | |
K71003-73 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-79 | Proof load fixture adapter-bootstrap equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-80 | Proof Load Fixture Adapter -Bootstrap Equipment | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-86 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71003-87 | PROOF LOAD FIXTURE ADAPTER - BOOTSTRAP EQUIPMENT (CE) | 3 | |
K71012 | ADAPTER-HAND PUMP/PODS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K71012-1 | Adapter -Hand Pump. Power Door Opening System | 6 | |
K71012-1-REVB | ADAPTER - HAND PUMP PDOS | 1 | |
K9895 | ADAPTER 1-1 1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KA-91-07 | ADAPTER - TNC FEMALE TO MALE | 4 | |
KA91-07 | ADAPTER - TNC FEMALE TO N MALE (SPL-14700) | 4 | |
KIT9190 | ADAPTER - TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K‑3706 | ADAPTER FOR MIL-H-5606 OIL FILLING DEVICE FOR TRONAIR (USA) | 16 | |
L0477-R00 | TIRE CALIBRATOR ADAPTER - AIRBUS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L2130 | Grease Gun Adapters & Extensions ( Description: Seal-Off Coupler ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LB20004-42 | ADAPTER - ACCESS PANEL, LEVERAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LBOA-20-T6 | ADAPTER-OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LBOA20 | ADAPTER-OFFSET | 2 | |
LCTC4558 | LIFING ADAPTER - COMP ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LH-ROT-01-11-0 | SERVICE KIT SPRAY ADAPTER CFM56-5B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL19352 | GM/FORD ADAPTER W/O-RING BLK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL24810 | 2-7/16 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL24820 | 2-3/4 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL24830 | 3-1/2 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL24840 | 1-5/16 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL24850 | 1-1/2 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LLA537A129 | ADAPTER-HOLDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LPA200SSX30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 1 | |
LPA20PSTA30 | LPA2-TRAVEL CASE ACCESSORIES AIRBUS ADAPTER | 2 | |
LST50697 | 0-100W/3CONTACTPOINTSADAPTERW/ | 1 | |
LTCT3685 | GUIDE & ADAPTER - #2 AFT SEAL | 2 | |
LTCT7285 | ADAPTER MECHANICAL PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
LX-1418 | Adapter - Rubber Tipped | 2 | |
LX1418 | ADAPTER - RUBBER TIPPED | 2 | |
M21930 | ADAPTER FILLING NLG (alternate 3956572-1 | 28 | |
M21931 | HOIST-ADAPTER NLG DRUG STRUT | 15 | |
M27456-2104D | ADAPTER - OFFSET, CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M46292 | ADAPTER - BRAKE UNIT NUT | 27 | |
M46750 | ADAPTER- MLG WHEEL AXLE NUT (ATR) | 19 | |
M4G750 | ADAPTER - MLG WHEEL AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M601-915.9 | DE-AERATING ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M65724077 | ADAPTER - TORQUE | 1 | |
M65725379 | SPECIAL TOOL - ACM COMPRESSOR ADAPTER | 2 | |
MA070004-31 | ADAPTER EQPT - MAIN FUEL TANK PUMPS | 1 | |
MA280009-1 | ADAPTER EQUIPMENT - AERIAL REFUELING RECEPTACLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MA280021-29 | ADAPTER EQPT - BODY FUEL TANK HUMAN ACCESS HATCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MA280024-1 | ADAPTER CABLE, BODY TANK PRE-CHECK CONTROL BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MA280051-1 | ADAPTER - MEASUREMENT PLUNGE MICROMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU113234 | ADAPTER TEST-DROGUE GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU113236 | ADAPTER TEST-BTRU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU56425-2 | ADAPTER, MOUNTING-DROGUE GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU57397 | ADAPTER, TEST-SEAT FIRING BREECH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU57829 | ADAPTER, TEST-HPRU PRESSURE INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU57843-2 | ADAPTER, TEST-BTRU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU58363 | ADAPTER-GAS SHACKLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MBEU61344 | ADAPTER, TEST-ROCKETS SYSTEM FLEXIBLE PIPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC-4A | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MOD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC200001-1 | ADAPTER KIT - UNIVERSAL HOIST EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC200001-69 | ADAPTER KIT - UNIVERSAL HOIST EQPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC300002-1 | DE-ICER NOSE REDOME ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC950001-36 | JACK ADAPTER-ESM RADAR R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MC950003-52 | ADAPTER EQPT - EOIR TURRET DEPLOYMENT UNIT, SECTION 43 AND 46 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ME65B40000-1 | TORQUE WRENCH ADAPTER - BRAKES, SIDE CARGO DOOR | 7 | |
ME65B83635 | Torque wrench adapter-brakes,side cargo door | 12 | |
MEN-44A-0401F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-0423F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-0601F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-0623F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-0801F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
MEN-44A-0823F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-1001F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
MEN-44A-1023F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44A-1201F | Modular Extension Nosecap for offset adapter - Modular Assy | 2 | |
MEN-44A-1223F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44B-1401F | Modular Extension Nosecap for offset adapter - Modular Assy | 1 | |
MEN-44B-1423F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44B-1601F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-44B-1623F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-46B-1801F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MEN-46B-1823F | Modular Extension Nosecap for offset adapter - Modular Assy | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
MFLX-6 | TRANSDUCER ADAPTER (STRAIGHT-6 INCHES (152 MM) LENGTH) | 2 | |
MIL-H-5593-4-156-1OE | ADAPTER HOSE CABIN PRESSURIZATION SAFETY VALVE - TEST KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B00115-1 | ADAPTER - PROTRACTOR, SPEED BRAKE | 2 | |
MIT65B01201 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 7 | |
MIT65B01202-1 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 10 | |
MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 5 | |
MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
MIT65B01502 | ADAPTER - WRENCH | 1 | |
MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
MIT65B01539 | WRENCH - TORQUE ADAPTER | 2 | |
MIT65B01540 | Torque wrench adapter-downlock actuator,MLG | 2 | |
MIT65B01570 | Torque adapter-retract actuator,wing landing gear | 2 | |
MIT65B02025 | TORQUE WRENCH ADAPTER ASSEMBLY - MIDFLAP INBOARD TRAILING EDGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
MIT65B04308-1 | TORQUE ADAPTER SET - CARGO DOOR MECHANISM | 1 | |
MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B08802-1 | TORQUE WRENCH ADAPTER - BUNGEE DOWNLOCK, JURY STRUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B13164 | Adapter -Main Entry Door Bearing Nut Wrench | 6 | |
MIT65B15171 | TORQUE ADAPTER -0 VARIABLE | 2 | |
MIT65B18229-2 | ADAPTER 747-SP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B18229-2-INC | ADAPTER 747-SP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B40500-1 | ADAPTER ASSEMBLY - VERTICAL FIN LAMB AIR MOVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B80326-6 | ADAPTER - PROTRACTOR, CRANK ASSEMBLY, ELEVATOR TORQUE TUBE | 2 | |
MIT65B80495 | SPANNER ADAPTER - BRAKE PEDAL, CABLE BUS, CRANK ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM & CTR. MECH. LAT. CONTROL | 2 | |
MIT65B80549 | ADAPTER - TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
MIT65B80550 | ADAPTER - TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT | 6 | |
MIT65B80859 | Torque wrench adapter-sequence mech assy,speed brake | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B80934 | SPANNER ADAPTER - GEARBOX ASSEMBLY, OUTBOARD AILERON LOCKOUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B80985-9 | Adapter - Protractor Thrust | 8 | |
MIT65B81213 | TORQUE WRENCH ADAPTER - FORWARD RUDDER QUADRANT | 1 | |
MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
MIT65B81561 | SPLINE ADAPTER - OUTBOARD FLAP DRIVE | 4 | |
MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B82314 | TEST ADAPTER - INBOARD HYDRAULIC RESERVOIR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B82568 | ADAPTER - PRESSURE | 2 | |
MIT65B82831 | ADAPTER - SPLINED | 1 | |
MIT65B90315 | ADAPTER EQUIPMENT - LOAD TEST, PRESSURE RELIEF DOOR LATCH | 4 | |
MIT65B90363 | ADAPTER - JT9D REAR MOUNT TANGENTIAL LINK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B92408-1 | ADAPTER SHAFT - ALIGNMENT FIXTURE | 9 | |
MIT65B92603-1 | ADAPTER - DEFUELING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B92603-2 | ADAPTER - DEFUELING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B92603-3 | ADAPTER - DEFUELING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65B97230 | ADAPTER - LUBRICATION, FAN THRUST REVERSER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MIT65BO120 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 1 | |
MIT69B81601-1 | ADAPTER - PROTRACTOR, THRUST REVERSER | 7 | |
MIT69B82662 | Socket adapter set-spliler actuator bolt | 5 | |
MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
MJ-A4-0401F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-A4-0423F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-A4-0601F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
MJ-A4-0623F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-A4-0801F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
MJ-A4-0823F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
MJ-A4-1001F | Modular Extension Nosecap for offset adapter - jaw model number | 1 | |
MJ-A4-1023F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-A4-1201F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-A4-1223F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B4-1401F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B4-1423F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B4-1601F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B4-1623F | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B6-1801F* | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MJ-B6-1823F* | Modular Extension Nosecap for offset adapter - jaw model number | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MK7ATIS 002EL | ADAPTER-TIRE INFLATION/DEFLATION | 3 | |
MK7ATIS-002EL | ADAPTER - TIRE INFLATION/DEFLATION | 3 | |
MK7ATISGBC-GH | ADAPTER - TIRE INFLATION/DEFLATION | 4 | |
MMG060-01 | ADAPTER FOR PRESSURE GREASING(TO-27-349) | 1 | |
MMG060-05 | ADAPTER - BEARINGS PRES GREASING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MMG060-12 | ADAPTER - BEARINGS PRES GREASING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MMG060-19 | ADAPTER - BEARINGS PRES GREASING | 1 | |
MMG060-32 | ADAPTER - BEARINGS PRES GREASING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MMG060-33 | ADAPTER FOR PRESSURE GREASING (TO-27-349) | 1 | |
MODEL 801600 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MODEL 80I-600 | AMP-CLAMP ADAPTER, AC CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MODEL 884FY-24 | ADAPTER KIT, 856NM 1/2 PITOT-STATIC TUBE PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MODEL Y8100 | AMP-CLAMP ADAPTER (CURRENT PROBE), AC CURRENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MODEL884FY-23 | ADAPTER KIT, PITOT-STATIC TUBE PRESSURE TEST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MP-06 | WRENCH ADAPTER (3/16-4,8 MM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MP-07 | WRENCH ADAPTER (7/32-5,6 MM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MP-08 | WRENCH ADAPTER (1/4-6,4 MM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MQ4-120 | RADAR COOLING INLET PLUG (MQ4-AARSS) ADAPTER, JACK PAD, NSN: 1560-01-659-4947 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS-15X-S1 (DINO-LITE) | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS15X | MULTI-PUROSE ADAPTER; XY STAGE WITH 360 DEGREE ROTATING TURNTABLE | 1 | |
MS21902J4 | ADAPTER M-M7/16 | 8 | |
MS21915J5-4 | ADAPTER M7/16 - F1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS21915J6-4 | ADAPTER M9/16 - F7/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS21916J4-3 | ADAPTER M7/16-M3/8 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS21916J5-4 | ADAPTER M7/16-M1/2 | 1 | |
MS21916J6-4 | ADAPTER M7/16-M9/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 1 | |
MS24203-1 | ADAPTER MS24203-1 MILITARY DEPARTMENTS | 12 | |
MS27404-3D | EXPENDABLE MATERIAL/ADAPTER-SPLINE CAVITY | 2 | |
MS4001645-1 | PRESSURE CHUCK ADAPTER RESERVOIR FWD-AFT SLIDE PN 4A3904 SERIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS4001671-1 | PRESSURE CHUCK ADAPTER MID SLIDE PN 66898-101/102 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS4001672-1 | PRESSURE CHUCK ADAPTER OFF WING SLIDE PN 60592-SERIES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS4001675-1 | PRESSURE CHUCK ADAPTER COB PN B42365-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MS4001676-1 | PRESSURE CHUCK ADAPTER COB PN 806835-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MT0011 | TORQUE ADAPTER 737-300, -400, -500 | 11 | |
MT133-9 | ADAPTER ASSEMBLY (OR LYCOMING ST-71-8) | 2 | |
MV060-2035 | ADAPTER TRANS JEEP 5/8-18 MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MV063-1368 | ADAPTER-8MM QUICK CONNECT-MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MV063-1369 | ADAPTER-10MM QUICK CONNECTMALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MV201389-RKT | S-ADAPTER REPAIR KIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MV201391 | ADAPTER EGR - M14 X 1.5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
MultiRAE PGM-6228 | multigas monitor for PID 10.6eV lamp 0.1-5000ppm, LEL, & O2, non-wireless, Extended - duration Li-ion rechargeable battery with alkaline adapter," | 1 | |
N-2055-25 | REDUCER ADAPTER (20-16) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N/A | ADAPTER FOR STARTER DUCT CFM56-3 | 5 | |
N16C-P2D-B | Adapter; 12-pin Lemo to 16 Pin Lemo cable connector, Phasec P2D/P3D to Nortec 1000/2000, BRIDGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N16C-P2D-R | Adapter; 12-pin Lemo to 16 Pin Lemo cable connector, Phasec P2D/P3D to Nortec 1000/2000, Reflection | 1 | |
N16C-Z21-B | Adapter; 4 Pin-Fischer to 16 Pin Lemo cable connector | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N2966400 | SIDE VIEWING , 120 DEGREE FIELD OF VIEW TIP ADAPTER DEPTH OF FIELD 6 - INFINIY MM | 1 | |
N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
N4149300 | AT80D/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING | 1 | |
N4149400 | AT120D/NF-IV96N IPLEX NX TIP ADAPTER | 2 | |
N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
NB2903-4 | FEMALE QUICK-FIT ADAPTER | 1 | |
NB3070210-2M | HOSE - VALVE ADAPTER TYRE INFLATION HOSE VALVE ADAPTOR | 1 | |
NB30710 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NB307100 | SMALL-BORE CHARGING ADAPTER EXTRA LONG P/N NB30710 | 2 | |
NB485010 | LARGE 12V SCREW-ON INFLATION ADAPTER | 4 | |
NTG2604-S | AIRCRAFT TYRE PRESSURE CHECKING GAUGE, 0-260 PSI, CALIBRATED, WITH SMALL-BORE 8V VALVE ADAPTER | 5 | |
NTGPC-002 | END ADAPTER - TYRE PRESS. GAUGE | 1 | |
O118233 | ADAPTER, LIFTING -OBIGGS | 1 | |
O2N2FP0039 | CHARGE ADAPTER, O2, -4MJ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OFA | OXYGEN FILL ADAPTER - NEW | 1 | |
OFCA3HDKT | 73MM-153MM SPIDER FW W ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OFCADPTR | ADAPTER 3/8" TO 1/2" SNAP-ON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OHME65B81110-1 | ADAPTER - HOISTING, POWER UNIT, INBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OHME65B81111-3 | ADAPTER - HOISTING, POWER UNIT, OUTBOARD TRAILING EDGE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OMNI-A-ADP21 | BONDMASTER PITCH-CATCH PROBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
OMP2505-3 | ADAPTER - IDG OIL | 11 | |
OMP2506-3 | ADAPTER - INLET | 20 | |
P14789-4 | ADAPTER - PITOT | 8 | |
P15589M1-3 | ADAPTER - PITOT TEST | 6 | |
P15589M1-4 | PITOT-STATIC ADAPTER TOOL | 2 | |
P204-30HVPZT | BNC - ADAPTER | 1 | |
P22201-4 | BARFIELD P22201-4 PITOT STATIC ADAPTER | 4 | |
P22942M1-4 | Barfield P22942M1-4 Pitot Static Adapter, For Falcon Aircraft | 6 | |
P29932-4 | BARFIELD P29932-4 PITOT MAST STATIC ADAPTER | 3 | |
P2KABF02 | PMAT-2000 ADAPTER CABLE: PN° 704-2619-001 | 6 | |
P40951M-3 | PITOT TEST ADAPTER, HAWKER HS-125 600-900 | 2 | |
P40951M-4 | Pitot tube adapter for Hawker HS125-600/700 & 800 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P62261M-3 | Pitot Test Adapter - SH60B/S70 | 5 | |
P62261M-4 | ADAPTER - PITOT PROBE | 5 | |
P75400M-3 | ADAPTER - PITOT TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
P75400M-4C | Adapter - Pitot Test (Typically included in Air Da | 3 | |
P75701-3 | Barfield P75701-3 Static Test Adapter, For Boeing, Cirrus Hawker and Fixed Wing Aircraft | 9 | |
P75701-4 | Barfield P75701-4 Static Test Adapter, For Dornier and Airbus | 13 | |
P75701-4C | ADAPTER-PITOT PROBE ROSEMONT PITOT PROBES | 12 | |
P75701-4C | ADAPTER-PITOT PROBE | 12 | |
P757014C | ADAPTER-PITOT PROBE | 12 | |
P75701HT-4 | ADAPTER - TEST, ELEVATOR FEEL (INCLUDED IN AIR DATA ACCESSORY KIT | 1 | |
P75701M2 | ADAPTER - PITOT TEST | 1 | |
P75701M2-3 | PILOT TEST ADAPTER - B737 | 11 | |
P75701M23 | PITOT ADAPTER HIGH TEMP FOR BOEING 737-600 / 700 / 800NG / BBJ / MAX | 11 | |
P77796HT-3 | ADAPTER - PROBE, PITOT-STATIC. | 5 | |
P80128-4 | PITOT TEST ADAPTER - FOKKER | 4 | |
P86892-3 | ADAPTER: PITOT STATIC, AERO 560 /CESSNA - VARIOUS | 3 | |
P96255-3 | BARFIELD P96255-3 PITOT STATIC ADAPTER, FOR CESSNA SINGLE ENGINE AND CESSNA AIRCRAFT | 3 | |
PC-100-6 | ADAPTER-OXY CHARGING | 19 | |
PC-1006 | ADAPTER - OXYGEN CHARGING | 19 | |
PC-1007 | TRONAIR PC-1007 HIGH PRESSURE ADAPTER | 6 | |
PC-1009 | GSE 016 - ADAPTER,OXYGEN CHARGING | 5 | |
PC-1011 | TRONAIR PC-1011 – HIGH-PRESSURE NITROGEN ADAPTER – MAX. 3,000 PSI / .305-32 TO -03 JIC FLARE | 7 | |
PC1006 | ADAPTER - OXYGEN CHARGING | 19 | |
PDL-AP-01-BG-F | PDL-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PE9002 | ADAPTER FOR PV-017 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PE9090 | ADAPTER FOR PV-017 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PE9538 | ADAPTER - RF, TYPE N(M) TO TYPE C(M), 50 OHM | 1 | |
PE9539 | ADAPTER - RF, TYPE N(F) TO TYPE C(F), 50 OHM | 1 | |
PF53175 | ADAPTER-SPLINE CAVITY | 3 | |
PF53481-9P | CART, SERVICE - LANDING GEAR STRUT (5 GAL CAPACITY WITH HANDPUMP, HOSE, AND GRAVITY FILL ADAPTER) | 6 | |
PF55759 | GRAVITY FILL ADAPTER (FOR PF53361-2PWS) | 3 | |
PFS777-1 | ADAPTER - PRECOOLER MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PL-13997 | ADAPTER - LOAD POSITIONER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PPK3706 | K-3706 HIGH PRESSURE CONNECTOR AIRCRAFT GOOSE NECK STRUT SERVICE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PS22203M-3-4 | ADAPTER: STATIC,PITOT,STANDBY - DASH 8-400 / Q400 | 4 | |
PS44129-4-6 | Barfield PS44129-4-6 Pitot Test Adapter, For Agusta Aircraft | 3 | |
PS47699-3-4 | PITOT- STATIC ADAPTER | 4 | |
PS49742M-4-4 | PITOT STATIC ADAPTER DA-42 | 4 | |
PS49742M3-4 | ADAPTER: PITOT STATIC, CESSNA/PIPER/DHC-3 | 3 | |
PS49742M4-4 | BARFIELD PS49742M4-4 PITOT TEST ADAPTER, FOR AIRCRAFT | 4 | |
PS56620M2-4-4 | BARFIELD PS56620M2-4-4 PITOT STATIC ADAPTER, FOR P | 4 | |
PS6-80000-00 | T2195 SJB TEST BOX WITH 100-240V AC TO 9V DC 1.2A, 10,8W POWER ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PS99016-4-6 | KC-135 PITOT STATIC ADAPTER | 1 | |
PSD40-502 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
PSD40-502-1 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
PSD40-502-3 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
PSD40-503 | ADAPTER FUEL QTY TEST - BOEING | 2 | |
PSD40-524B | ADAPTER - CABLE, FQIS | 1 | |
PSD60-503 | ADAPTER FUEL QTY TEST - BOEING | 7 | |
PSD60-504 | ADAPTER FUEL QTY TEST - BOEING | 8 | |
PSD737-1 | TOOL-FQIS TEST SET ADAPTER KIT | 9 | |
PSD747-20 | HARNESS ADAPTER-FQIS TESTER INTERCONNECT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSD747-22 | HARNESS ADAPTER - FQIS INTERCONNECT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSD747-23 | ADAPTER HARNESS-FQIS DENSITOMETER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSDAF-C130A | ADAPTER CABLE FOR PSD90-1C TESTER | 2 | |
PSDAF-C130D | ADAPTER CABLE FOR PSD90-1C TESTER | 1 | |
PSDAF-C130I | ADAPTER CABLE FOR PSD90-1C TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSDAF-C130T | ADAPTER CABLE FOR PSD90-1C TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSDF4600-57 | VACUUM ADAPTER-CENTRAL VAC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PSS22300-3-4-4 | Pitot-static test adapter | 10 | |
PSS22300-3-44 | ADAPTER - PITOT TEST | 10 | |
PSS44600M2-3-4-4 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 6 | |
PSS44600M344 | ADAPTER - PROBE PITOT STATIC | 4 | |
PSS60615M1-4-6-6 | TEST ADAPTER,PITOT-DUAL STATIC | 2 | |
PSS73259-3-4-4 | BARFIELD PSS73259-3-4-4 PITOT STATIC ADAPTER | 4 | |
PSS76700-3-4-4 | PITOT STATIC TEST ADAPTER-B767 | 6 | |
PSS76700M2-3-4-4 | ADAPTER - PROBE, PITOT-STATIC. | 6 | |
PSS76700M22-3-4-4 | ADAPTER - PITOT TEST (TYPICALLY INCLUDED IN AIR DATA ACCESSORY KIT) | 1 | |
PSS88139-3-4-4 | Barfield PSS88139-3-4-4 Pitot Static Adapter, For Agusta Aircraft | 3 | |
PSS88340-3-4-4 | ADAPTER, ADA340-612 | 4 | |
PT11558M1 | Pre-Test Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PT14097 | ADAPTER: PITOT,PRE-TEST, | 1 | |
PT19625 | ADAPTER: PITOT,PRE-TEST, | 1 | |
PT421-418 | NAV-AIDS LTD PITOT STATIC ADAPTERS PN: PT421-418 | 2 | |
PW103574 | ADAPTER-R/I FAN CASE | 1 | |
PW4000-94 (Bootstrap adapter) | PW4000-94 (Bootstrap adapter) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 101618 | ADAPTER - HYDRAULIC PUMP | 2 | |
PWA 102830 | ADAPTER - ANGLE GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 103574 | ADAPTER-R I FAN CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 25026 | ADAPTER 1 JT9D-7Q | 2 | |
PWA 25741 | ADAPTER-STATIC BALANCE DISK | 2 | |
PWA 26873 | ADAPTER-LPC | 2 | |
PWA 27733 | ADAPTER-STATIC BAL | 2 | |
PWA 28024 | ADAPTER-RING | 1 | |
PWA 45849 | ADAPTER. ANTI-ROTATION | 3 | |
PWA 45933 | ADAPTER. ANTI-ROTATION | 3 | |
PWA 76154 | ADAPTER-LIFT AND TURN(2 INCH SPOOLS) | 5 | |
PWA 80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
PWA 80577 | ADAPTER-STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 83101 | ADAPTER - TORQUE, GEARBOX OIL LUBE AND SCAVENGE COVER | 3 | |
PWA 85791 | ADAPTER, COUNTER-TORQUE | 1 | |
PWA 86458 | ADAPTER - PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA 88603 | ADAPTER-R/I FAN CASE | 1 | |
PWA101181 | ADAPTER HOLDING-MAIN GEARBOX | 1 | |
PWA101618 | ADAPTER-ACTUATOR 2.5 BLEED VALVE | 2 | |
PWA102093 | ADAPTER-DRIVE ENGINE TURNING, BORESCOPE | 1 | |
PWA102285 | ADAPTER - TORQUE, IDG AIR/OIL COOLER SUPPORT BRACKET | 1 | |
PWA102390 | ADAPTER - ENGINE TURNING DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA102830 | ADAPTER-REMOVAL HOUSING AND STRAINER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA103488 | ADAPTER - LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA103574 | ADAPTER-R I FAN CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA103668 | ADAPTER - VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA10408 | ADAPTER - ROTOR TUNING TOOL | 6 | |
PWA104631 | ADAPTER - FUEL FLOWMETER OUTLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA104632 | ADAPTER - FUEL PUMP INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105056 | ADAPTER-DRIVE, BORESCOPE INSPECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105136 | ADAPTER - TORQUE, RADIAL DRIVE UNIT - PW2000 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105266 | ADAPTER - VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105267 | ADAPTER - LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105274 | ADAPTER-R I IDG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA105706 | ADAPTER-LIFT AND TURN,FAN CONTAINMENT CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106305 | ADAPTER,TORQUE-EEC ALTERNATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106415 | ADAPTER, LEAK TEST - OIL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106473 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106491 | ADAPTER,DRIVE-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA106492 | ADAPTER,OFFSET-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107125 | ADAPTER-OIL DRAIN, ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107602 | ADAPTER, TORQUE - ENGINE, AFT DRAIN MAST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107715 | ADAPTERS SET AFT - ENGINE TO TRANSPORT STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA107733 | ADAPTER-VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA109773 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
PWA111018 | ADAPTER SUPPORTLIFT - ENGINE FAN | 2 | |
PWA111443 | ROTATOR ADAPTER - ENGINE ASSY, BORESCOPE | 3 | |
PWA111484 | ADAPTER ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA115399 | ADAPTER, LIFTING PLATE - IDG | 3 | |
PWA12210 | ADAPTER - JT8D, #1 BRG OIL | 7 | |
PWA12386 | ADAPTER - FUEL SYSTEM FLUSHING AND PRESERVING OUTLET | 3 | |
PWA15376 | TF33/JT3 VANE STAGE 1 - ADAPTER, LOCATOR (PRELIMINARY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA15559 | TF33/JT3 VANE STAGE 3 - ADAPTER, LOCATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA15564 | TF33/JT3 VANE STAGE 4 - ADAPTER, LOCATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA15678 | TF33/JT3 VANE STAGE 2 - ADAPTER, LOCATOR (PRELIMINARY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA20333 | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA20333 REV A | ADAPTER-SPLINED HYD. WRENCH TO HEX DRIVE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA211305 | ADAPTER HANDLING - MAIN GEARBOX ASSEMBLY | 1 | |
PWA211308 | LEAK CHECK ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
PWA211314 | ADAPTER, INSTALLATION -SCAVENGE OIL PUMP | 2 | |
PWA211413 | ADAPTER, ANTI-TORQUE | 1 | |
PWA211435 | ADAPTER, TORQUE - PMA ROTOR | 4 | |
PWA211825 | ADAPTER - IGNITER REV A | 4 | |
PWA212369 | TORQUE ADAPTER (LP35)- ANGLE GEARBOX | 2 | |
PWA212464 | AIRFLOW ADAPTER - LEAK CHECK OF THE FUEL SYSTEM | 1 | |
PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
PWA25207 | ADAPTER, CONNECTING - AGB TO STAND_[PWA25207] | 1 | |
PWA25256 | ADAPTER - AGB OIL FLOW TEST OUTER HOUSE_[PWA25256] | 2 | |
PWA25261 | ADAPTER - OIL FLOW, AGB OIL FLOW JET CVR_[PWA25261] | 2 | |
PWA25270 | ADAPTER - AGB BACKLASH CHECK_[PWA25270] | 2 | |
PWA25278 | ADAPTER, CONNECTING - G/B TO STAND_[PWA25278] | 2 | |
PWA25361 | ADAPTER - DIFFUSER CASE TO STAND_[PWA25361] | 1 | |
PWA25414 | ADAPTER - HPC FRONT BAL BRG SLEEVE NUT_[PWA25414] | 2 | |
PWA25444 | ADAPTER - T/S/COUPLING OUTER RACE NUT_[PWA25444] | 2 | |
PWA25446 | ADAPTER - T/S/COUPLING OUTER RACE WR_[PWA25446] | 2 | |
PWA25497 | POST & INDICATOR ADAPTER - HPC ROTOR_[PWA25497] | 1 | |
PWA25553 | ADAPTER - OIL FLOW, #4 BRG NOZZ_[PWA25553] | 2 | |
PWA25565 | ADAPTER - HPC LIFT & TURN REAR HUB_[PWA25565] | 2 | |
PWA25569 | ADAPTER, CONC. CHK - BRG, BAL REAR RACE_[PWA25569] | 1 | |
PWA25570 | ADAPTER, CONC. CHK - BRG, BAL. OUTER RAC_[PWA25570] | 1 | |
PWA25577 | ADAPTER, WEIGHT - HPC BAL BRG INR RACE_[PWA25577] | 2 | |
PWA25578 | ADAPTER, WEIGHT - HPC, BAL BRG WT OUTR_[PWA25578] | 1 | |
PWA25612 | ADAPTER,TORQUE WRENCH - LPC FLANGE_[PWA25612] | 1 | |
PWA25741 | ADAPTER-STATIC BALANCE DISK_[PWA25741] | 2 | |
PWA25779 | ADAPTER - PRIMARY FUEL MANIFOLD INLET_[PWA25779] | 1 | |
PWA25780 | ADAPTER - SECONDARY FUEL MANIFOLD INLET_[PWA25780] | 1 | |
PWA25798 | ADAPTER - IMC INLET VANE_[PWA25798] | 1 | |
PWA25926 | ADAPTER-ENG ASSY SUPPORT PEDESTAL_TO HOLD ENG HORIZONTALLY ASSY/DIS-ASSY_1397 X 610 X 610 / 31.8 KG_[PWA25926] | 4 | |
PWA26147 | ADAPTER - LIFT | 2 | |
PWA26147A | ADAPTER, LIFT & TRUNNION - HPC_[PWA26147A] | 1 | |
PWA26204 | ADAPTER, REMOVAL - TEC NO.4 BRG REPLC_[PWA26204] | 2 | |
PWA26206 | ADAPTER, PLATE - HPC FRT HUB CLAMP_[PWA26206] | 1 | |
PWA26246 | ADAPTER,LOCATING - HPC CASE & STATORS_[PWA26246] | 1 | |
PWA26311 | ADAPTER - REM/INST, FAN ROTOR ASSY_[PWA26311] | 1 | |
PWA26359 | ADAPTER, INSP - NO.2 BRG INTERNAL_[PWA26359] | 1 | |
PWA26360 | ADAPTER - #1 BRG INTERNAL RADIAL CLR INS_[PWA26360] | 1 | |
PWA26486 | ADAPTER,LIFTING - TURB ROTOR 2ND STG_[PWA26486] | 2 | |
PWA26487 | ADAPTER,LIFTING - TURB ROTOR 1ST STG_[PWA26487] | 1 | |
PWA26871 | ADAPTER - TURBINE SHAFT FRONT FLANGE DIA. 151 X 34MM [PWA26871] | 2 | |
PWA26872 | ADAPTER-BLADE TIP CLEARANCE_[PWA26872] | 3 | |
PWA26873 | ADAPTER - FLANGE, LPC DRIVE TURB SHAFT_[PWA26873] | 2 | |
PWA26999 | ADAPTER - DISK PRESS_[PWA26999] | 1 | |
PWA27017 | ADAPTER - LPT AIR SEAL BALANCE_[PWA27017] | 1 | |
PWA27250 | ADAPTER - GEAR BOX NOZZLE OIL FLOW_[PWA27250] | 2 | |
PWA27251 | ADAPTER - OIL FLOW, GEARBOX NOZZLE_[PWA27251] | 2 | |
PWA27263 | ADAPTER - CONTACT ANGLE, BRG #1 CONT_[PWA27263] | 1 | |
PWA27264 | ADAPTER, INSP - #2 BRG SPACER MEASURET_[PWA27264] | 1 | |
PWA27274 | ADAPTER - WRENCH, FRT COMP DRIVE_[PWA27274] | 2 | |
PWA27403 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27403] | 1 | |
PWA27405 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27405] | 1 | |
PWA27406 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27406] | 1 | |
PWA27407 | ADAPTER, BRG - LPC BAL ARBOR INN RACE_[PWA27407] | 1 | |
PWA27408 | ADAPTER, INSP - LPC BAL ARBOR OUTR RACE_[PWA27408] | 1 | |
PWA27466 | ADAPTER, RETAINING - LPT FRONT RETAINER_[PWA27466] | 2 | |
PWA27508 | HUB - FAN ROTOR ADAPTER REM,INST_[PWA27508] | 1 | |
PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
PWA27618 | ADAPTER,CONNECTING - DIFF CASE_[PWA27618] | 1 | |
PWA27648B | ADAPTER - REAR COMPRSR REAR RETAINER_[PWA27648B] | 1 | |
PWA27704 | ADAPTER, BRG - REAR COMP REAR BAL FIX_[PWA27704] | 2 | |
PWA27726A | ADAPTER, STATIC BAL - HPC 12TH STAGE_[PWA27726A] | 1 | |
PWA27733 | ADAPTER - STATIC BAL. 5TH TURB ASSY_[PWA27733] | 2 | |
PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
PWA27755 | ADAPTER, LIFTING - 1ST TURB ROTOR ASSY_[PWA27755] | 2 | |
PWA27759 | ADAPTER, LIFTING - 2ND STG TURB ROTOR_[PWA27759] | 2 | |
PWA27774 | PLATE, ADAPTER - 1ST STG TURB ROTOR_[PWA27774] | 1 | |
PWA27777 | PLATE, ADAPTER - TURB DISK & BLADE RIV_[PWA27777] | 2 | |
PWA27830 | ADAPTER, LIFT & TURN - LPC 4TH D&BLADE_[PWA27830] | 1 | |
PWA27869 | ADAPTER, INDICATOR - FRT COMP DR TURB_[PWA27869] | 1 | |
PWA27889 | ADAPTER,PLATE - FRT COMP DISK TABLOCK_[PWA27889] | 2 | |
PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
PWA27940 | ADAPTER - AIR LEAK TEST_[PWA27940] | 1 | |
PWA27941 | ADAPTER - AIR LEAK TEST_[PWA27941] | 2 | |
PWA28106 | ADAPTER, HYD HOSE - ENG RIGGING | 5 | |
PWA28940 | ADAPTER,TORQUE - 3.0 BLEED CONTROL_20.3 X 20.3 X 157.5MM / 0.18KG | 5 | |
PWA28954A | ADAPTER - LIFT & TURN, LPC 2ND STG DISK_[PWA28954A] | 1 | |
PWA29237 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 2 | |
PWA29328 | ADAPTER HANDLING-FUEL CONTROL-FUEL PUMP ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA29330 | ADAPTER-R I COMPRESSOR ROTOR 1ST STAGE | 1 | |
PWA29370 | ADAPTER-LEAK CHECK ENGINE BREATHER TUBE TO AIR SUPPLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA29388 | ADAPTER - HPC REAR HUB TO STAND_[PWA29388] | 2 | |
PWA29447 | ADAPTER-INLET CONE(7Q ENG)_[PWA29447] | 1 | |
PWA29451 | ADAPTER, HYD PUMP - VSV ACTUATOR_0.45KG / 32 X 32 X 65MM [PWA29451] | 7 | |
PWA29602 | ADAPTER-ROTATING #2 BRG_[PWA29602] | 1 | |
PWA29667 | ADAPTER, DRAIN - FUEL SYSTEM DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA29674 | ADAPTER-GRINDER | 2 | |
PWA29989 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
PWA45104 | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA45104 REV B | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA45232 | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | 3 | |
PWA45232 REV NC | ADAPTER- SWEENEY SWE-8100 TO P&WA SPLINED ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA45532 | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | 4 | |
PWA45532 REV NC | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA45849 | ADAPTER, ANTI-ROTATION | 3 | |
PWA7025-4 | WRENCH - IMC TORQ ADAPTER EXT, OUTER_[PWA7025-4] | 1 | |
PWA75370 | ADAPTER,CLEANING-ENGINE ASSEMBLY,FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA75511 | ADAPTER-R I TURBINE SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA75574 | ADAPTER-LPT SHAFT REAR_[PWA75574] | 2 | |
PWA76154 | ADAPTER-LIFT AND TURN(2 INCH SPOOLS) | 5 | |
PWA76156 | ADAPTER LIFT & TURN ENG ASSY,HPT RTNR(2-3/4 SPLS) | 4 | |
PWA76156 REV NC | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA76I56 | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80005 | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80005 REV C | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA8023 | ADAPTER, PEDESTAL - ADJUSTABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
PWA80230 REV A | ADAPTER, PEDESTAL - ADJUSTABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA80574 | ADAPTER - HANDLING, MAIN GEARBOX - PW2000 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85248 | AIRFLOW TEST ADAPTER - TURBINE C/AIR | 1 | |
PWA85433 | ADAPTER-FUEL PRESERVE FUEL PUMP INLET | 7 | |
PWA85436 | ADAPTER - TORQUE, BLEED VALVE (2.9) HPC | 1 | |
PWA85451 | ADAPTER-FUEL PRESERVE FUEL FLOW METER OUTLET | 4 | |
PWA85453 | ADAPTER - FUEL PRESERVATION , FUEL PUMP INLET | 2 | |
PWA85478 | ADAPTER - VACUUM CHECK | 1 | |
PWA85498 | ADAPTER,VACUUM CHECK-GEARBOX DEOILER OUTLET | 1 | |
PWA85525 | ADAPTER - HOT OIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85526 | ADAPTER-HOT OIL-ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85579 | ADAPTER-LEAK TEST FUEL SYST DISTRIBUTION VALVE | 4 | |
PWA85700 | ADAPTER - LEAK TEST, OIL SYSTEM STATIC | 1 | |
PWA85749 | ADAPTER - ELECTRICAL HARNESS CONNECTOR | 2 | |
PWA85843 | ADAPTER-VACUUM CHECK-EXHAUST CASE OIL SCAVENGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85844 | ADAPTER-LEAK TEST-ENGINE ASSY OIL SYST STATIC CHECK | 2 | |
PWA85845 | ADAPTER-VACUUM CHECK-ENGINE ASSEMBLY GEARBOX | 1 | |
PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85862 | Adapter, Torque - Engine Assy, Fuel Pump, Retaining Bolts | 6 | |
PWA85863 | ADAPTER - VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA85928 | ADAPTER - TORQUE, 2.5 BLEED VALVE ACTUATOR SPL-2396 | 1 | |
PWA86018 | Adapter,oil sampler-engine assy,gearbox chip detector | 2 | |
PWA86457 | ADAPTER-PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA86458 | ADAPTER - PUMP (POST-PW-SB 72-134) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA86461 | ADAPTER-TORQUE FUEL PUMP RETAINING BOLT | 7 | |
PWA86527 | ADAPTER-PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA86603 | ADAPTER - MGB PMA ROTOR RETAINER NUT | 2 | |
PWA86621 | ADAPTER REDUCER-HPC ASSY FLOW CONTROL INLET | 2 | |
PWA87198 | ADAPTER,TORQUE-AIR/OIL COOLER, MOUNT BOL | 3 | |
PWA88018 | ADAPTER-TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA88112 | ADAPTER, VACUUM CHECK - GEARBOX BREATHER | 1 | |
PWA88125 | ADAPTER - N4 BEARING COMPARTMENT SCAVENGE TUBE | 1 | |
PWA88603 | ADAPTER-R/I FAN CASE | 1 | |
PWA88620 | ADAPTER - LIFT AND TRUNNION | 1 | |
PWA88629 | ADAPTER,HOLDER-PMA RETAINING NUT | 1 | |
PWC30256 | feeding adapter - Pratt & Whitney Canada | 2 | |
PWC30393 | flow test adapter - Pratt & Whitney Canada | 3 | |
PWC30409 | HOLDING ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC30506 | RIG, FUEL MANIFOLD ADAPTERS - FLOW TEST | 6 | |
PWC30530 | PLUG - FUEL MANIFOLD ADAPTER | 9 | |
PWC30535 | flow adapter - Pratt & Whitney Canada | 2 | |
PWC30649 | spacer adapter - Pratt & Whitney Canada | 2 | |
PWC30712 | Adapter - Pratt & Whitney Canada | 6 | |
PWC30831 | flow adapter - Pratt & Whitney Canada | 2 | |
PWC31280-202 | MEASURING ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC31280-302 | Adapter - Pratt & Whitney Canada | 2 | |
PWC31280-303 | Adapter - Pratt & Whitney Canada | 2 | |
PWC31280-355 | ADAPTER PWC31280-355 | 2 | |
PWC31280-356 | ADAPTER PWC31280-356 | 2 | |
PWC31280-401 | Adapter - Pratt & Whitney Canada | 2 | |
PWC31423 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC32094 | flow adapter - Pratt & Whitney Canada | 1 | |
PWC32121 | Adapter - Pratt & Whitney Canada | 1 | |
PWC32209 | ADAPTER GRINDING - PRATT & WHITNEY CANADA | 5 | |
PWC32422 | anti-rotation adapter - Pratt & Whitney Canada | 2 | |
PWC32437 | Balancing adapter - Pratt & Whitney Canada | 1 | |
PWC32446 | balancing adapter - Pratt & Whitney Canada | 1 | |
PWC32459 | FLOW ADAPTER - PRATT & WHITNEY CANADA | 1 | |
PWC32505 | ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC32550 | Adapter - Pratt & Whitney Canada | 1 | |
PWC32809 | HOLDING ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC34126 | Anti-rotationN Adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC34258 | Adapter - Pratt & Whitney Canada | 3 | |
PWC34405 | FIXTURE, ADAPTER-FUEL MANIFOLD | 8 | |
PWC34546 | Balancing adapter - Pratt & Whitney Canada | 1 | |
PWC34752 | ADAPTER MOUNT - PRATT & WHITNEY CANADA | 7 | |
PWC37077 | ADAPTER, PULLER, OIL SEAL CARRIER, STARTER-GEN | 10 | |
PWC37110 | holding adapter - Pratt & Whitney Canada | 5 | |
PWC37138 | ADAPTER DISC - Pratt & Whitney Canada | 5 | |
PWC37147 | ADAPTER DISC - Pratt & Whitney Canada | 4 | |
PWC37267 | support adapter - Pratt & Whitney Canada | 2 | |
PWC37322 | balancing adapter - Pratt & Whitney Canada | 1 | |
PWC37360 | holding adapter - Pratt & Whitney Canada | 1 | |
PWC37368 | holding adapter - Pratt & Whitney Canada | 2 | |
PWC37504 | measuring adapter - Pratt & Whitney Canada | 1 | |
PWC37522 | adapter - Pratt & Whitney Canada | 1 | |
PWC37540 | HOLDING ADAPTER - PRATT & WHITNEY CANADA | 6 | |
PWC37560 | MEASURING ADAPTER - PRATT & WHITNEY CANADA | 4 | |
PWC37562 | measuring adapter - Pratt & Whitney Canada | 4 | |
PWC37563 | measuring adapter - Pratt & Whitney Canada | 3 | |
PWC37614 | PULLING ADAPTER - PRATT | 6 | |
PWC37650 | holding adapter - Pratt & Whitney Canada | 3 | |
PWC37728 | KNOCKER PULLER - CHIP DETECTOR ADAPTER | 11 | |
PWC37728/PHP | PULLER-INSTALL CHIP DETECTOR ADAPTER | 1 | |
PWC37760 | pulling adapter - Pratt & Whitney Canada | 5 | |
PWC37762 | adapter - Pratt & Whitney Canada | 2 | |
PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC37825 | LIFTING ADAPTER - PRATT & WHITNEY CANADA | 3 | |
PWC37906 | ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC37990 | grinding adapter - Pratt & Whitney Canada | 5 | |
PWC37994 | grinding adapter - Pratt & Whitney Canada | 2 | |
PWC38001 | holding adapter - Pratt & Whitney Canada | 5 | |
PWC38011 | Adapter (S) / ANTI-ROT. Adapter., ADAPTE | 1 | |
PWC38147 | ADAPTER FITTING-DRA | 13 | |
PWC38149 | Adapter, Anti-rotation, LP Impeller Retaining Nut (Post-SB20546) | 1 | |
PWC38231 | holding adapter - Pratt & Whitney Canada | 3 | |
PWC38247 | ADAPTER, ANTI-ROTATION, LP TURBINE | 5 | |
PWC38290 | grinding adapter - Pratt & Whitney Canada | 6 | |
PWC38307 | MOUNT ADAPTER - PRATT & WHITNEY CANADA | 3 | |
PWC38455 | ADAPTER-BALANCING | 1 | |
PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40181 | PLATE-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40259 | ADAPTER-HEAT GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40387 | PUSHER-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40430 | ADAPTER - STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40469 | Adapter - Pratt & Whitney Canada | 3 | |
PWC40490 | ADAPTER-AGB,AIR STARTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40580 | Adapter-SPLINE,GEARSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40703 | PUSHER-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40712 | DCU adapter cable - Pratt & Whitney Canada | 4 | |
PWC40712-REVA1 | ADAPTER DCU 4 T-HARNESS | 1 | |
PWC407121 | ADAPTER DCU 4 T-HARN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40781 | ADAPTER DYNO-TORQUE | 4 | |
PWC40842 | ADAPTER-HEATING PLAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC40868 | ADAPTER-HPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC42041 | Adapter - Pratt & Whitney Canada | 3 | |
PWC43262 | ADAPTER - FAN NUT | 3 | |
PWC44062 | adapter - Pratt & Whitney Canada | 2 | |
PWC44203 | ADAPTER ANTI-ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC45314 | ADAPTER-PROPSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC46491 | ADAPTER - MANIPULATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC46575 | OVERHEAD LIFTING ADAPTER - HPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC46798 | ADAPTER - SHIPPING CRADLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC48118 | TORQUE ADAPTER-NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC50055 | ADAPTER - PRATT & WHITNEY CANADA | 5 | |
PWC50058 | ADAPTER - IMPELLER BALANCING | 1 | |
PWC50059 | Balancing adapter - Pratt & Whitney Canada | 2 | |
PWC50096 | ADAPTER - BALANCING ROTOR | 1 | |
PWC50216 | flow adapter - Pratt & Whitney Canada | 1 | |
PWC50350 | ADAPTER - BALANCE HYDRA. - PRATT & WHITNEY CANADA | 3 | |
PWC50373 | LIFTING ADAPTER - PRATT | 3 | |
PWC50429 | ADAPTER-TORQUING | 1 | |
PWC50589 | ADAPTER - PRATT & WHITNEY CANADA | 4 | |
PWC50699 | lifting adapter - Pratt & Whitney Canada | 2 | |
PWC50940 | lifting adapter - Pratt & Whitney Canada | 3 | |
PWC51098 | ADAPTER-FLOW TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC51842 | ANTI-ROTATION ADAPTER | 1 | |
PWC52130 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | 1 | |
PWC52693 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
PWC52701 | PLUG, LEAKAGE CHECK, POST-SB7598 FUEL MANIFOLD INLET ADAPTER | 1 | |
PWC54082 | HOLDING ADAPTER - PRATT & WHITNEY CANADA | 5 | |
PWC54212 | ADAPTER TURBO ASSY - PRATT & WHITNEY CANADA | 6 | |
PWC54213 | lifting adapter - Pratt & Whitney Canada | 6 | |
PWC54214 | LIFTING ADAPTER - PRATT & WHITNEY CANADA | 6 | |
PWC54234 | balancing adapter - Pratt & Whitney Canada | 2 | |
PWC54576 | ADAPTER-LOCKING | 3 | |
PWC54609 | Adapter-Balance Hydra. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC54967 | ADAPTER BAL-PT ROTOR ABOR | 2 | |
PWC55001 | Lifting adapter - Pratt & Whitney Canada | 1 | |
PWC55444 | Adapter - Pratt & Whitney Canada | 1 | |
PWC55554 | ADAPTER FUEL-INHIB | 6 | |
PWC55878 | Adapter-ANTIROTATION | 2 | |
PWC55921 | Adapter - Pratt & Whitney Canada | 1 | |
PWC56144 | lifting adapter - Pratt & Whitney Canada | 2 | |
PWC56159 | rod adapter - Pratt & Whitney Canada | 1 | |
PWC56274 | ADAPTER RGB HOUSING-PLANT 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC56434 | lifting adapter - Pratt & Whitney Canada | 5 | |
PWC56591 | LIFTING ADAPTER - PRATT & WHITNEY CANADA | 1 | |
PWC56612 | ADAPTER-CROWFOOT | 4 | |
PWC56871 | lifting adapter - Pratt & Whitney Canada | 6 | |
PWC56894 | FLUSH ADAPTER-PLANT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC56940 | lifting adapter - Pratt & Whitney Canada | 3 | |
PWC57084 | Adapter - Pratt & Whitney Canada | 5 | |
PWC57158 | Adapter - Pratt & Whitney Canada | 2 | |
PWC57254 | Adapter-PT SHAFT | 2 | |
PWC57411 | MOTIVE FLOW-FMU ADAPTER Q400 PW150 | 5 | |
PWC57496 | Gauge adapter - Pratt & Whitney Canada | 2 | |
PWC57646 | Adapter - Pratt & Whitney Canada | 2 | |
PWC58758 | ADAPTER, APU TRANS-PORT | 4 | |
PWC59053 | WASH ADAPTER - PRATT & WHITNEY CANADA | 8 | |
PWC60144 | Adapter - Pratt & Whitney Canada | 7 | |
PWC60445 | ADAPTER- BLADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC60455 | ADAPTER-ANTIROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC60686 | ADAPTER-LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC60787 | Adapter - Pratt & Whitney Canada | 3 | |
PWC60850 | Adapter - Pratt & Whitney Canada | 1 | |
PWC61004 | ADAPTER-LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61059 | ADAPTER - PRATT & WHITNEY CANADA | 3 | |
PWC61248 | ADAPTER-TIE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61322 | ADAPTER-LIFTINGIMP/SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61345 | DRIFT ADAPTER-AC GEN | 4 | |
PWC61577 | ADAPTER-LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61688 | ADAPTER -1ST STAGE ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61712 | ADAPTER-FAN ASSY | 1 | |
PWC61766 | ADAPTER-HEATER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC61943 | ADAPTER-LIFTING FIXT. | 1 | |
PWC62296 | RING-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62316 | ADAPTER-COOLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62317 | ADAPTER PLATE-OVEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62542 | Rear adapter - Pratt & Whitney Canada | 4 | |
PWC62643 | ADAPTER-1ST STAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62756 | ADAPTER-STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62759 | Adapter - Pratt & Whitney Canada | 1 | |
PWC62767 | ADAPTER - LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC62787 | ADAPTER-INTERMEDIATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC63096 | Adapter - Pratt & Whitney Canada | 1 | |
PWC63297 | ADAPTER-PRESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC63386 | ADAPTER - PUSHER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC64042 | Adapter - Pratt & Whitney Canada | 2 | |
PWC64051 | ADAPTER PLUS QTY 1 EACH NUT, WASHER & T-BOLT | 5 | |
PWC64059 | ADAPTER - HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC64618 | ADAPTER ANTI-ROTATION | 3 | |
PWC64656 | ADAPTER (SERIAL CONNECTION), PRE-SB41068 | 3 | |
PWC65819 | EEC ADAPTER CABLE EMC-60 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC66368 | Adapter - Pratt & Whitney Canada | 1 | |
PWC66471 | ADAPTER - PRATT | 1 | |
PWC66625 | Adapter - Pratt & Whitney Canada | 4 | |
PWC67348 | ADAPTER - HEATER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC68865 | Adapter - Pratt & Whitney Canada | 2 | |
PWC68977 | ROD-ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC69269 | ADAPTER-HEAT GUN | 1 | |
PWC69810 | cable adapter - Pratt & Whitney Canada | 2 | |
PWC69836 | WASH ADAPTER - PRATT & WHITNEY CANADA | 7 | |
PWC69875 | Wash adapter - Pratt & Whitney Canada | 1 | |
PWC70090 | Lifting adapter - Pratt & Whitney Canada | 1 | |
PWC70124 | lifting adapter - Pratt & Whitney Canada | 4 | |
PWC70319 | lifting adapter - Pratt & Whitney Canada | 3 | |
PWC70336 | ADAPTER-GEARSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC70386 | lifting adapter - Pratt & Whitney Canada | 1 | |
PWC70675 | LIFTING ADAPTER - PRATT & WHITNEY CANADA | 2 | |
PWC70792 | ADAPTER - ENGINE STAND | 6 | |
PWC70797 | ADAPTER P3 LEAK CHK - PRATT & WHITNEY CANADA | 4 | |
PWC71171 | Adapter - Pratt & Whitney Canada | 2 | |
PWC71392 | ADAPTER - PRATT & WHITNEY CANADA | 5 | |
PWC71489 | ADAPTER, ANTI-ROTATION | 2 | |
PWC71548 | ADAPTER - BALANCING ROTOR | 1 | |
PWC71780 | ADAPTER-HEATING PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC71781 | ADAPTER-HEATING PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC71782 | ADAPTER-HEATING PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC71783 | ADAPTER-HEATING PLATFORM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC72569 | DCU II Fine Thread T-Harness Adapter | 1 | |
PWC72790 | DCU-T-HARNESS ADAPTER | 1 | |
PWC73009 | RS422 adapter - Pratt & Whitney Canada | 4 | |
PWC76077 | ADAPTER- LEAK TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC85894 | ADAPTER - NUT, SQUIRREL CAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC85952 | ADAPTER ROD - LPC BOOST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC85973 | ADAPTER RING - BUILD STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86145 | ADAPTER - CORE CART | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86316 | ADAPTER ANTI-ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86620 | ADAPTER- BUILDPOST TO FANCASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86673 | ADAPTER-UNIVERSAL CART EXHAUST CASE LIFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86874 | CART ADAPTER - OBPD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC86948 | LIFTING ADAPTER - STORAGE CRADLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC88371 | ADAPTER - ANTI ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC89878 | Pressure Set Adapter - Pratt & Whitney Canada | 2 | |
PWC90086 | RIG, FUEL MANIFOLD ADAPTERS - FLOW TEST | 6 | |
PWC90191 | USB To RS-232 Adapter (1 PORT) | 1 | |
Q46100 | ADAPTER 8-EA CLT&PHL | 10 | |
Q47334 | ADAPTER-AXLE-NUT | 9 | |
QR-330 | INHIBITING ADAPTER INHIBITING RIG ADAPTER - CF6-80E1 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R-1117 | ADAPTER-JACK | 12 | |
R-117 | ADAPTER - BRAKE DISC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R-1798 | ADAPTER- MLG JACK PAD | 6 | |
R-1988 | ADAPTER - JACK, WING | 12 | |
R1117 | ADAPTER-JACK | 12 | |
R1722 | ADAPTER - BRAKE Q400 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
R1988 | ADAPTER - JACK, WING | 12 | |
R46014 | AXLE WRENCH ADAPTER NLG-A330 | 27 | |
RB T101623-7 | Adapter, Cradle Set-Support, Main Rotor Blade | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 1 | |
RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 1 | |
RB23033037 | HOLDER--COMPRESSOR ROTOR COUPLING ADAPTER | 1 | |
RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
RB6799199 | Anti-Icing Air Adapter Valve | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RB6893501 | Drift-Spur Adapter Gearshaft | 1 | |
RBD29826 | 4 Blade Tail Rotor Nut #369D21716-5 Torque Wrench Adapter | 2 | |
RBT400212 | Adapter Assembly (407-210-005-101) | 1 | |
RBT400255 | Adapter Assembly (430-240-010-101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBT400256 | Power Adapter (430-240-005-101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBT400283 | Adapter (430-240-020-101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RBW2905G00132-3G | PCM ADAPTERS KIT, HYDRAULIC SYSTEM TEST BENCH (GF-40-00) | 1 | |
RBW6205G09031-3G | TROLLEY ADAPTER, M/R HEAD SUPPORT (HE-19-00) | 1 | |
RBW6205G09132-3G | TROLLEY ADAPTER, SWASHPLATE SUPPORT (HE-20-00) | 2 | |
RC2500G05 | " CFM56-5B/CMANUALDRIVE PADADAPTER 1 " | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2500G06 | "CFM56-7B MANUAL DRIVE PAD ADAPTER 1 " | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2700 | ADAPTER HYDRAULIC PUMP PAD-RIGHT SIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RC2990G01 | ADAPTER, MANUAL DRIVE PAD, GENX-1B & GENX-2B ENGINE, FUTUREDRIVE NG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RDA100i | Rundown Adapter (10-100 IN/LB) | 1 | |
RE220-SHP-001 | COVER - APU GENERATOR ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
RFA-8332 | COAXIAL ADAPTER - REVERSED POLARITY BNC MALE (PLUG | 1 | |
RFT1230 | ADAPTER - COAX (TNC TO BNC) | 3 | |
RIN28108706000 | ADAPTER -STARTER FILL | 1 | |
RNC7913-10 | ADAPTER - REMOVAL | 1 | |
RRT032369 | ADAPTER - SPRUNG WIND DEFLECTION | 3 | |
RRT050389 | TURNOVER ADAPTER - LOAD HP/IP SUPPORT STRUCTURE. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RRT054025 | ADAPTER PRE SB 72-H706 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RRT083711 | ADAPTER POST SB 72-H706 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RRT087442 | ADAPTER KIT - P30 MANIFOLD DRYING | 1 | |
RRT087442-2 | ADAPTER KIT - P30 MANIFOLD DRYING(VACUUM GAGE) | 1 | |
RRT087442-3 | ADAPTER KIT - P30 MANIFOLD DRYING | 2 | |
RRT089154 | LIFT ADAPTER - BASIC STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RS232C | CVR AUDIO MONITOR ADAPTER - UNIVERSAL AVIONICS SYSTEM CORP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RS422 | CABLE, ADAPTER - RS422. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSE 6403 | INLET LIFTING ADAPTER, CF34-10E ENGINE | 7 | |
RSE1051 | ADAPTER-FUEL CONTROL | 2 | |
RSE1134 | ADAPTER - TORQUE TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RSE1234 | ADAPTER-TORQUE TOOL | 17 | |
RSEI05I | ADAPTER- FUEL CONTROL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RVA30 | ADAPTER USED WITH RV3355-8 | 1 | |
RY31020A | ADAPTER - INLET, POWER PL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S/20002210 | 1-1/4X3/4 ADAPTER/40IN ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S232B /5653 | SOCKET ASSY-NLG ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S277CR4000 | ADAPTER - CRADLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S34093-4 | NAV-AIDS PITOT STATIC ADAPTERS | 2 | |
S34146-4 | ADAPTER - STATIC LINE | 9 | |
S34146B | ADAPTER: PITOT STATIC,TEST, BLANKING,SHORTS SD3-30/SD3-60 | 4 | |
S51089-4 | Barfield S51089-4 Pitot Static Test Adapter, For Fixed Wing Aircraft | 2 | |
S76-612 | PITOT-STATIC ADAPTER KIT, PNEUMATIC BOOST PUMP | 3 | |
SA-2000 | DUAL AIRLINE BACK-MOUNTED ADAPTER KIT | 4 | |
SA-EMU | Scanner Adapter for Rohman mini-rotor to unirotor | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SA070810 | AC ADAPTER CORD FOR CUI P/N DMS090110X-P5-ET I.T.E POWER SUPPLY, 5 FEET, WITH LED INDICATOR, REPLACEMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SA1234 | ADAPTER 1/2 - 3/4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SA3812 | ADAPTER 3/8 - 1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SAS-FXU-9 | FLEXIBLE SCANNER ADAPTER FOR 4-PIN PROBES,9"ENGTH,SLIMLINE | 1 | |
SBE1882 | ADAPTER - PRESS PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SBE2220 | ADAPTER ASSY - OPV, FUNCTIONAL TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SCA-FUEL2M | 2M - AIRBUS CENTRE TANK 1.5M HOSE ADAPTER | 1 | |
SCST1AK350CU | KIT-ADAPTER CU,SCS350 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SCST1AK350GSP | KIT-ADAPTER GSP, SCS350 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SDM11 | ADAPTER - FLEXIBLE SHAFT DRIVE | 6 | |
SDM11A | ADAPTER - FLEXIBLE SHAFT DRIVE | 1 | |
SE-28-1103 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 2 | |
SE227-2011 | Torque Adapter - Rudder Trim Knob | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE27-2011 | TORQUE ADAPTER - RUDDER TRIM KNOB | 7 | |
SE27-6002 | ADAPTER -0 SPOILER ACTUATOR CYLINDER TO REMOVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SE28-1103 | ADAPTER ASSEMBLY - SUMP DRAIN VALVE REMOVAL | 2 | |
SE28-1105 | HOSE ADAPTER - SUMP FUEL DRAIN | 2 | |
SG13-ADP-HYC-12 | QUICK DISCONNECT ADAPTER -12 HOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SJN471 | TORQUE ADAPTER 1-1/16’’ | 2 | |
SK2-20413 | FILLER-ADAPTER | 4 | |
SKA100-4 | BARFIELD SKA100-4 PITOT STATIC ADAPTER | 3 | |
SKASR20-4 | Barfield SKASR20-4 Pitot Static Adapter, For Cirrus Aircraft | 2 | |
SLT0075 | ADAPTER - TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SMIG277CR7R4H | ADAPTER - CRADLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPG100ATPG-400-C1AB | AIRCRAFT TYRE PRESSURE GAUGE - COMES WITH BIG AND SMALL ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPK-FMG-011A | FLAT ADAPTER #10-32F (100 LBF) | 2 | |
SPL-10029 | ADAPTER - BORESCOPE MOTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10357 | TORQUE WRENCH ADAPTER STOP NUT - WLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10873 | ADAPTER EQPT - HEAT EXHANGER / PLENUM, R&I, AC PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10895 | ADAPTER - TRAINING EDGE FLAP ACTATOR R/I | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-10997 | ADAPTER ASSY - WRENCH, HOOK SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-14867 | ADAPTER - OFFSET CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-14868 | ADAPTER - CORE TURNING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1603 | ADAPTER - HEAT EXCHANGER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1681 | ADAPTER - RUDDER PEDAL FORCE CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1748 | ADAPTER - TORQUE WRENCH, MANUAL, STABILIZER TRIM WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1751 | EQUIPMENT -ADAPTER, CONTROL WHEEL- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1783 | ADAPTER - LEAK TEST, APU FUEL LINE SHROUD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1808 | CABLE - ADAPTER (USE WITH TELEDYNE DFDAU FLIGHT LINE TESTER P/N 2229738) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-19 | ADAPTER - CADC REMOTE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-1975 | ADAPTER - INSTALLATION/REMOVAL FUSELAGE DRAIN VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-20727 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-2358 | SET ADAPTER - TORQUE HMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-27 | Adapter - Torque, Hydralic Reservoir Barrel Guide | 1 | |
SPL-3739 | Adapter -Torque | 1 | |
SPL-3740 | Adapter-Torque | 1 | |
SPL-4093 | Adapter - MLG Trim Cylinder | 1 | |
SPL-5064 | ADAPTER - PROTRACTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-5378 | Adapter-Torque Wrench | 1 | |
SPL-5438 | Adapter-Torque Wrench | 1 | |
SPL-5441 | Adapter-Torque Wrench | 1 | |
SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL-9790 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPL2358 | SET ADAPTER - TORQUE HMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SPR-001-BOE | AIR SOURCE FITTING - REFUEL ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
SRES30 | ADAPTER - TORQUE | 3 | |
SRES30А | ADAPTER - TORQUE, RR TRENT ENGINE THRUST REVERSER | 3 | |
SS-4-SAE-7-4 | ADAPTER - HOSE | 1 | |
SS32092-4 | STATIC-ADAPTER(BAR TYPE) | 5 | |
ST-71-8 | ADAPTER-GAGE | 2 | |
ST1350C/LB-2 | Adapts FTI Mandrels (-1) and LB Nosecaps to -5 MB mandrel adapter/LB nosecap to MB-Z/XX puller | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2575A | STANDARD TOOL - TORQUE ADAPTER | 2 | |
ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-242 | TORQUE WRENCH ADAPTER - BOX TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 4 | |
ST2580-245 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000(NOM'L)A/C FLATS | 4 | |
ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
ST2580-263 | Torque wrench adapter walking beam assy nut-spacer | 8 | |
ST2580-267 | Wrench - Spanner, Adapter For BACN10RF Nuts. (See ST2580-267 Drawing For Correct Dash Number) | 13 | |
ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-267-24-3-7 | SPANNER WRENCH ADAPTER-BACN10RF24 NUT | 1 | |
ST2580-267-24-4-7 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ST2580-337 | TORQUE WRENCH ADAPTER - FOR 15/16-INCH HEX NUT | 2 | |
ST2580-550A | TORQUE ADAPTER, RATCHETING 737-8 | 1 | |
ST60419 | Adapter, Pick-Up Tub | 1 | |
ST95063 | TORQUE ADAPTER-FUEL CONTROL, DELTA P - APU500 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 2 | |
ST992B | ADAPTER - GREASE GUN - FLAP EXHAUST GATE | 9 | |
ST992B, | ADAPTER - GREASE GUN - FLAP EXHAUST GATE | 9 | |
ST992B-1 | ADAPTER-GREASE GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-11561 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1/2 NPT MALE X 1/2" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-3900 | ADAPTER - STRAIGHT, TUBE TO HOSE (MEETS AS5180D04 SPECOFOCATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-6100 | TUBE AND HOSE BARB MALE ADAPTER - NYLON, 1" NPT X 1" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD-7111 | ADAPTER - HEX WRENCH, 0.25-INCH HEX TO 0.375IN SQUARE DRIVE, STANDARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
STD67669 | Torque Adapter-Main Drive Shaft | 1 | |
STD67681 | Adapter-Torque | 1 | |
STD67685 | Adapter-Drive Pad | 1 | |
STD67686 | Adapter-Discharge | 1 | |
SV225 | COM-20583 ADAPTER - STRAY VOLTAGE | 1 | |
SVT262-30 | SEAL, SVT262-28/TA38B ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SVTSRAD27228 | ADAPTER CONE - STEP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SVTSRAD27229 | ADAPTER CONE - SMOOTH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWE-67 | SWE-67 - RATCHET ADAPTER. | 1 | |
SWE13832-11 | ENGINE STAND - ENGINE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWE4803 | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWE4803A | TORQUE ADAPTER - AFT FLIGHT MOUNT BOLT | 1 | |
T | ADAPTER - IDG SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T&E 12-10-1 | ADAPTER - IDG SERVICING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-181246 | Adapter-Power Arm | 1 | |
T-181246A | Adapter-Power Arm | 1 | |
T-181346 | Adapter-Power Arm | 1 | |
T-300483 | Adapter - Power Arm | 1 | |
T-304040 | ADAPTER-POWER ARM | 2 | |
T-349 | Adapters - SR-20, SR-22 | 2 | |
T-4040-12 | STEPPLATEADAPTER2-1/4X2-3/4PRT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4040-13 | STEPPLATEADAPTER2-1/8X2-5/8PRT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4040-14 | STEPPLATEADAPTER2-3/8X2-7/8PRT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4040-2 | STEPPLATEADAPTER1-7/8X2-3/8PRT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4040-4 | STEPPLATEADAPTER1-5/8X2-2PROTO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4040-5 | STEPPLATEADAPTER1-5/8X2-2PROTO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-420 | ADAPTER - TYRE INFLATION TOOL | 1 | |
T-438834 | ADAPTER-TORQUE | 1 | |
T-445708 | Adapter-Torque | 2 | |
T-451 | Adapters - PC12 | 2 | |
T-451318 | Adapter-Torque | 1 | |
T-451318PM | ADAPTER-TORQUE | 1 | |
T-453305 | Adapter - Torque | 1 | |
T-702ROA 686 BSA | ADAPTER - HALKEY ROBERTS CORP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-71023 | Torque Adapter - Barrel gland nut | 1 | |
T-71025 | Torque Adapter - Plug, blocking and thermal relief valve | 1 | |
T-71038 | Torque Adapter - Barrel gland nut | 1 | |
T-820 | Adapters - Malibu, Mirage (PA-46) | 3 | |
T-97483069 | APEX SJ409-2 ADAPTER EXT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-F187 | ADAPTER D-100-MIL-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-J4240-12M | PULLER ADAPTER MALE 5/8-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-J4240-14M | PULLER ADAPTER MALE 5/8-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-RD289 | ADAPTER INSTALL -HEMTT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-S68016 | S68016 - 5/8 ADAPTER-TF528DE2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T101263-105 | ADAPTER (PART OF T101263-101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T103063 | TOOL SET-ADAPTER HOLDING,ENGINE | 1 | |
T1203-00 | ADAPTER-INTERFACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T1203-01 | ADAPTER-INTERFACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T1203-03 | ADAPTER-INTERFACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T12816 | Fixture-test, port adapter | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T131946 | Q-SPRING TORQUE ADAPTER | 1 | |
T181246 | ADAPTER-POWER ARM | 1 | |
T1F69J | FORK, ADAPTER - MJ-1 | 1 | |
T260 | ADAPTER: TOWBAR,UNIV, DA-20,2EA REQD | 1 | |
T3078766 | PROGRAMMING ADAPTER NZ-2000/2010 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T325726-57 | SELF-TEST ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T33264 | Anti-Skid Adapter Removal | 9 | |
T420 | ADAPTER - TYRE INFLATION TOOL | 1 | |
T5776 | ADAPTER-INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T7055 | ADAPTER-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T92165 | A300- JACK ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TA1J3200E | ADAPTER,LIFTING-POD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE60B00019 | HARNESS - CALIBRATION ADAPTER, OIL QUANTITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE60B40037-1 | TEST ADAPTER - AMPHENOL FUEL QUANTITY PROBE | 2 | |
TE60B40147 | TEST ADAPTER - TRW/CINCH FUEL QUANTITY PROBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65-20804 | Torque Wrench Adapter - Stabillizer Trim Hand Wheel | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B00731 | ADAPTER - THRUST REVERSER ACTUATOR, SHOP AIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B00776 | HARNESS ASSEMBLY - FUEL QUANTITY INDICATOR, CALIBRATION ADAPTER, NUMBER 2 AND NUMBER 3 MAIN AND CENTER WING TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B00776-1 | Harness Assembly - Auxiliary Tank Fuel Quantity Ind. Calibration Adapter | 1 | |
TE65B00776-1 -51 -101 | Harness -Calibration Adapter. Fuel Quantity Indicator 2. 3. Main & Center Wing Tank | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B00776-101 | Harness Assembly - Auxiliary Tank Fuel Quantity Ind. Calibration Adapter | 2 | |
TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
TE65B40880 | TEST EQUIPMENT - ADAPTER CABLES, MAGNETIC HEADING REFERENCE SYSTEM (MHRS), NUMBER 1 AND NUMBER 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B90110 | TUBE ADAPTER - ENGINE START VALVE | 1 | |
TE65B90115 | ADAPTER CABLE - ENGINE OIL QUANTITY, AIRPLANE WIRING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TE65B91156 | ADAPTER CABLE -0 ENGINE OIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEE74 | ACTIVE AIDS ADAPTER JT9D-7R4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TF | CYCLING ADAPTER DASH-8 NLG | 1 | |
TF-56989 | CYCLING ADAPTER DASH-8 NLG | 3 | |
TF-56989-IAS | CYCLING ADAPTER DASH-8 NLG | 1 | |
TF50B27002A1 | ADAPTER - GREASING | 2 | |
TF50B39001 | ADAPTER OR 50-PIN BREAK-OUT BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TF50B71307 | ADAPTER-CHECKING CAL | 2 | |
TF56989 | CYCLING ADAPTER DASH-8 NLG | 3 | |
TL5596 | ADAPTER PROPELLER VERTICAL HOISTING DAPT70-00 | 2 | |
TL99517-C | SOCKET, FUEL ADAPTER NOZZLE, SLOTTED- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TM7900G001 | WASHING TOOL ADAPTER - METALIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TMH MA02 | JACK ADAPTER MLG - 13.2 TON | 2 | |
TMH MA03 | Jack Adapter MLG - 27 Ton | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TMH NA01 | JACK ADAPTER NLG - 2.2 TON | 2 | |
TMH NA01-00-00 | JACK ADAPTER NLG - 2.2 TON | 9 | |
TMH NA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
TMH NA10 | Jack Adapter NLG - 5.5 Ton | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TMH RA11-01-12 | ADAPTER M.M12X1-M.JIC7/16 | 3 | |
TMHD143-32-00 | ADAPTER - FILLING, ALT B | 1 | |
TMHDI16-11-00 | PRESS GAUGE ADAPTER - FEM M10X1 FEM NATO ref SE12-00 | 3 | |
TMHDI43-32-00 | ADAPTER - FILLING, ALT BRAKING RESERVOIR | 7 | |
TMHDI65-00-00 | ADAPTER F NATO - M JIC - 716-20 | 1 | |
TMHDIC16-21-00 | PRESURE GAUGE ADAPTER - 14 GAZ FNATO | 1 | |
TMHEC22-00-00 | ADAPTER - CRADLE | 1 | |
TMHMA02-00-00 | ADAPTER-MLG JACK | 9 | |
TMHMA020000 | ADAPTER-MLG JACK | 9 | |
TMHNA01-00-00 | ADAPTER- JACK, NLG | 9 | |
TMHNA01-00-00-5J | ADAPTER-NLG JACK | 1 | |
TMHNA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | |
TMHNA010000 | ADAPTER-NLG JACK | 9 | |
TMHRA11-12-67 | ADAPTER M NATO M 716-20 UNF ASSY | 3 | |
TMRX8 | TORQUE ADAPTER ESTRIADO 1/4 X 1/4 - ABERTO | 2 | |
TO3836 | ADAPTER -TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TS1176/D917 | WING BOLT TOOLS - NUT TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TSJ60B00002-2 | TEST JIG - AUTO-THROTTLE ADAPTER, ATTITUDE SIMULATION TABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TTR917271 | ADAPTER-NITROGEN,TYPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TWA 24-25-03-0108 | ADAPTER-TEST BOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U14A320000A | MANOMETER MIT ADAPTER (0-3500 PSI) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
U21891000 | ADAPTER - INFLATION | 16 | |
UPORT 1110 | 1-PORT RS-232 USB-TO-SERIAL ADAPTER | 2 | |
USA-19HS | CABLE - HIGH SPEED USB TO SERIAL ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
USB-SERIAL DB9 | USB-SERIAL MALE 9 PINS ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UT1127 | ADAPTER HOSE EPR TRANSMITTER TESTER, BB211-535 ENGINES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UT1145 | ADAPTER AND COUPLING - OIL FILLER, AEROQUIP COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UT1277 | ADAPTER - HOSE, EPR TANSMITTER TESTER - RB211-535 ENGINES (GDC10146) | 1 | |
UT713 | ADAPTER, SELF-SEALING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
UT865 | ADAPTER - LP FUEL SUPPLY TUBERIG | 6 | |
UT954 | ADAPTER-OIL TANK | 8 | |
UT984 | ADAPTER - AMERICAN THREAD 777-200ER, -300 | 7 | |
UT985 | ADAPTER - LP FUEL SUPPLY TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
VGZ-68 | ADAPTER - WRENCH, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WCI-1600HO | ADAPTER-OFFSET | 1 | |
WCI-1700-ONE-0601-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
WCI-1700-ONE-0623-20F | MODULAR EXTENSION NOSECAP FOR OFFSET ADAPTER - MODULAR ASSY | 1 | |
WCS32965 | WRENCH-TORQUE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WIDS107G | ADAPTER - EXPANDING STALL VENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
WP-N-GN | OREI Universal 2 in 1 Plug Adapter Type N for Brazil High Quality CE Certified-RoHS Compliant WP-N-GN | 1 | |
WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
WSS4AK350 | WSS4- ADAPTER KIT HYD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
X200948408 | IDG FLUSHING ADAPTER KITS - B1-B INPUT/OUTPUT FLUSH ADAPTERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA188E-12 | M16-2.0 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA3000B114 | 1-1/4" CROWFOOT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA3000B1316 | 1-3/16" CROWFOOT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA3000B1516 | 1-5/16 CROWFOOT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA3000B1716 | 1-7/16" CROWFOOT ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
YA6510-2 | ACURA INTEGRA 1990-93 ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Z-1063-11 | TIRE BEAD BREAKER RING - NOSE WHEEL ADAPTER | 3 | |
Z-1063-13 | TIRE ADAPTER RING-MAIN | 6 | |
Z-1063-14 | TIRE BEAD BREAKER RING - MAIN WHEEL ADAPTER | 3 | |
Z-3072-20 | MAIN TIRE ADAPTER RINGS(30 X 9.00-15) | 3 | |
Z072H4500000 | ADAPTER S-CHANNEL OXIGEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Z1064 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
Z1065 | CHARGING ADAPTERS - OXYGEN SYSTEM | 3 | |
Z1066 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
Z1067 | CHARGING ADAPTERS - OXYGEN SYSTEM | 2 | |
ZNBT-60-1W | ADAPTER - BIAS TEE, COAXIAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
f 72714-81 | Adapter Assy - Fuel QTY Sys | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
f 72952-2 | Adapter Set FWD - Thrust Lever | 5 | |
f 80013-1 | adapter assy - pin spanner | 14 | |
f72952-2 | Adapter Set FWD - Thrust Lever | 5 | |
f80013-1 | adapter assy - pin spanner | 14 | |
lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
lC6807 | BRACKET SET, ADAPTER-LPTR AFT SHAFT TO 2C600lG0l | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2ZJJ3 | ADAPTER FITTING, ABS, 3/4 IN OD, 1/4-18 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
98D71203022001 | ADAPTER-TROLLEY R/I IDG (PW AND CFM) | 4 | |
А27021-29 | ADAPTER EQUIPMENT - CONTROL WHEELS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
В28002-1 | HOSE ADAPTER - SUMP FUEL DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
С24002-78 | JACK ADAPTER-VSCF& IDG | 1 | |
A28005-48 | ADAPTER LEAK TEST APU 737-600-900 | 20 | |
PWA29667 | ADAPTER DRAIN - FUEL SYSTEM DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.