RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 008407 | TORQUE - ADAPTER, | 1 | |
| 08-0704-4000 | ADAPTER, PROPELLER TORQUE | 4 | |
| 08-8064-4000 | ADAPTER, TORQUE PROP | 5 | |
| 100-47838 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1045G02 | ADAPTER, ANTI-TORQUE - FAN STATOR TO FAN DISK (ANTI-TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1105 | ADAPTER, TORQUE, CPLG NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3027 | TORQUE ADAPTER, CAL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3129G03 | ADAPTER, TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR, SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3447P01 | ADAPTER, TORQUE - OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364G02 | TORQUE ADAPTER, FORWARD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364G03 | Torque Adapter, FWD Adapter Coupling Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9626G01 | TORQUE ADAPTER,PRESSURE TUBE-COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23006782 | ADAPTER, TORQUE, TURBINE ATTACH | 2 | |
| 23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| 23055724 | ADAPTER,WRENCH-1GV TORQUE TUBE | 4 | |
| 2471007-7 | ADAPTER, TORQUE TENSIOMETER | 4 | |
| 253682 | Adapter, Torque Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2557791 | ADAPTER, TORQUE, BYPASS VALVE COVER | 1 | |
| 281714-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281875-1-1 | ADAPTER, TORQUE WRENCH, SPLINED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281877-1-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 285540-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 287277-1-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 289507-1 | ADAPTER,TORQUE WRENCH | 2 | |
| 291251-1 | Adapter, Torque Wrench | 1 | |
| 291B300-005 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-005A | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-010 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-010A | ADAPTER, HI-TORQUE | 1 | |
| 291B300-015 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-015A | ADAPTER, HI-TORQUE | 1 | |
| 293386 | Adapter, Torque, Wrench, Splined | 1 | |
| 294896-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G05 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 3 | |
| 2C14040G06 | TORQUE ADAPTER,NO. 4B BEARING | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 1 | |
| 2C14040G08 | TORQUE ADAPTER, HPTR | 1 | |
| 2C1404G05 | TORQUE ADAPTER, PRESSURE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14685 | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
| 2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14685G01 | ADAPTER, ANTI‐TORQUE ‐ FAN STATOR TO FAN DISK | 2 | |
| 2C18020G02 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C5241G01 | ADAPTER, FAN SHAFT LOCKNUT TORQUE | 1 | |
| 2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937G08 | ADAPTER, TORQUE, SET ‐ COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81178 | ADAPTER, TORQUE NO 3 BEARING L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81178G01 | ADAPTER, TORQUE NO 3 BEARING L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81401G02 | ADAPTER, TORQUE BALANCE ARBOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81407G02 | (FUTURE PROCUREMENT P/N: 2C81407G03) ADAPTER, TORQUE – HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81407G03 | ADAPTER, TORQUE – HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81463 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81463G01 | ADAPTER, TORQUE – HPT LOCKNUT REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81665G01 | ADAPTER, TORQUE, LOCKNUT, AXIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81666G01 | ADAPTER, TORQUE, LOCKNUT AXIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81667G01 | ADAPTER, TORQUE, LOCKNUT, AIR/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
| 2C91349 | ADAPTER,TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91349G01 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2MIT65B81276-1 | ADAPTER, TORQUE WRENCH - BEARING RETAINER NUT | 1 | |
| 2MIT65B82215 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER, AILERON FORCE LIMITER | 2 | |
| 3402046-1 | ADAPTER, TORQUE, 245 SPLICE BOLTS | 1 | |
| 3402814-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402814-2 | ADAPTER, TORQUE WRENCH, AFT FUSELAGE RH SPLICE BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402822-1 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 3402822-3 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 3402822-5 | ADAPTER, TORQUE WRENCH FUSELAGE BOLT, STATION 737-817 | 1 | |
| 341663 | ADAPTER, TORQUE WRENCH, WING BOLT | 1 | |
| 362-04180A | TORQUE - ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029822-5 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029823-5 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029983 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29983 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 38A, 38A-1 | ADAPTER, TORQUE LIMITING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 403187-1 | ADAPTER, TORQUE WRENCH | 1 | |
| 403188-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 403190-1 | ADAPTER, TORQUE WRENCH, VERT STAB BOLTS | 1 | |
| 460004750 | ADAPTER, TORQUE LOADING | 2 | |
| 4916706-527 | ADAPTER, TORQUE; MLG AXLE NUT | 5 | |
| 4916787-1 | ADAPTER, TORQUE, PASSENGER AND SERVICE DOOR LATCH | 6 | |
| 7-362300019-601 | ADAPTER, TORQUE BARREL SUPPORT, 30MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-363110010 | ADAPTER,TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-562110085-001 | TORQUE ADAPTER, M/R MIXER SUPPORT BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70700-77395-101 | TORQUE ADAPTER, EXPANDABLE PIN, STATIONA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
| 810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
| 810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 19 | |
| 832622 | ADAPTER, SOCKET, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834730 | Adapter, Torque, Clutch | 1 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEA | 2 | |
| 856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G06 | TORQUE ADAPTER, I/R - NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G06 | TORQUE ADAPTER, I/R - NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G07 | TORQUE ADAPTER,INSTA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION | 4 | |
| 856A1000G09 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 6 | |
| 856A1006G01 | ADAPTER, TORQUE - COMPR STATOR | 8 | |
| 856A1022G03 | Adapter, Torque Wrench KIT | 12 | |
| 856A1098 | ADAPTER, TORQUE HPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1098G01 | ADAPTER, TORQUE WRENCH - HPT NOZZLE (ADAPTER) | 5 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 6 | |
| 856A1136 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 1 | |
| 856A1136G02 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 4 | |
| 856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT | 1 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL | 19 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
| 856A1865G01 | TORQUE ADAPTER,I/R-NO.3BRG 1 | 3 | |
| 856A2614G01 | Adapter, Torque Wrench | 4 | |
| 856A3385 | ADAPTER,TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3385P03 | ADAPTER,TORQUE WRENCH | 7 | |
| 856A3466 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3466G01 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | 5 | |
| 856A3514 | ADAPTER, RESIDUAL TORQUE ADAPTER | 1 | |
| 856A3514P02 | ADAPTER, RESIDUAL TORQUE (ADAPTER) | 5 | |
| 856A3517 | ADAPTER, COUNTERTORQUE (ADAPTER) | 1 | |
| 856A3517G02 | ADAPTER, COUNTERTORQUE | 5 | |
| 856A3750G02 | ADAPTER, COUNTERTORQUE | 12 | |
| 8C2024 | ADAPTER, ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2043 | ADAPTER, TORQUE - NO. 4 S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2539 | ADAPTER, TORQUE FAN SHAFT EXTENSION NUT AND SENSOR, SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2758 | ADAPTER, TORQUE - HPT AIR DUCT (LONG VERSION USED WITH RTR LOCK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 92700-10377-041 | TORQUE ADAPTER, PITCH CONTROL ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M42 | ADAPTER, SPLINE, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M42 REV B | ADAPTER, SPLINE, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M45 | ADAPTER, TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M45 REV B | ADAPTER, TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M51 | ADAPTER, SPLINE TORQUE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M51 REV B | ADAPTER, SPLINE TORQUE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98D27504035000 | ADAPTER,TORQUE WRENCH;|TORQUE ADAPTER TRUNNION UNT; | 20 | |
| 9C1091 | ADAPTER, TORQUE #4 BEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ADP-00331 | Torque adapter, tie bolt nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-00602-001 | TORQUE-ADAPTER, WING/FUSELAGE BOLT | 3 | |
| AGE15011 | TORQUE ADAPTER, BALANCE NUT | 5 | |
| AID-00838 | Adapter, Fuel injector torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AST-2877 | ADAPTER, TORQUE WRENCH | 7 | |
| AT-71049 | Torque Adapter, Compensator | 1 | |
| AT-71053 | Torque Adapter, Compensator | 1 | |
| AT-71055 | TORQUE ADAPTER, BEARING AND GLAND RETAINERS | 1 | |
| AT-71055 | Torque Adapter, Bearing and Gland Retainers | 1 | |
| AT-71055A | Torque Adapter, Bearing and Gland Retainers | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT-71597 | TORQUE ADAPTER, RETAINER SLEEVE | 1 | |
| AT-71597 | Torque Adapter, Retainer Sleeve | 1 | |
| AT-71687 | TORQUE ADAPTER, RIGGING RETAINING RING | 1 | |
| AT-71687 | Torque Adapter, Rigging Retaining Ring | 1 | |
| AT-73786 | Torque Adapter, Relief Valve | 1 | |
| AT31799 | ADAPTER, TORQUE WRENCH | 5 | |
| B19453-1 | ADAPTER, TORQUE WRENCH VALVE TO CYLINDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B362-04180A | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-09111 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 5 | |
| BEI3840 | WHEEL ADAPTER, HIGH TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C27020-1 | Adapter, Torque Wrench - L.E. Slat | 3 | |
| C27060-1 | ASSEMBLY-ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST | 21 | |
| C27060-22 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST (INCLUDES PROVISIONS FOR ANGULAR MEASUREMENT) | 5 | |
| C32013-1 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 16 | |
| C32013-15 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 6 | |
| C32013-16 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 4 | |
| C32013-9 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| C52007-1 | ADAPTER, TORQUE WREN | 10 | |
| C52008-1 | ADAPTER, TORQUE WRENCH - GALLEY AND ENTRY DOOR (THE BOEING COMPANY) | 19 | |
| CAT5643-12C | ADAPTER, TOOL-TORQUE WRENCH | 2 | |
| CAT5643-13C | ADAPTER, TOOL-TORQUE WRENCH | 3 | |
| CAT5643-7B | ADAPTER, TORQUE WRENCH | 1 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CDI250010031 | HEX ADAPTER,TORQUE WATCH 2"HEX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DSR2039-2 | ADAPTER, TORQUE SPANNER | 1 | |
| DZZ7154-1 | ADAPTER, MLG AXLE NUT TORQUE | 7 | |
| E53835 | Torque Adapter, Pressure Differential | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E53835, E53837 | Torque Adapter, Pressure Differential Sensor | 1 | |
| F72867-1 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST | 23 | |
| F80176 | ADAPTER, TORQUE WRENCH- MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80176-8 | TORQUE WRENCH ADAPTER, MLG | 13 | |
| FRDH101 | ADAPTER, TORQUE WRENCH | 3 | |
| FRDH121 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/8" | 2 | |
| FRDH141 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 7/16" | 12 | |
| FRDH161 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 1/2" | 2 | |
| FRDH181 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 9/16" | 3 | |
| FRDH201 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 5/8" | 1 | |
| FRDH241 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/4" | 1 | |
| FRDH301 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 15/16" | 1 | |
| G-4376K | Torque Adapter, Inlet Fitting | 1 | |
| G-4376L | Torque Adapter, Rod End Nut | 1 | |
| G-9826 | Torque Adapter, Sleeve Cover | 1 | |
| G600-270052-1 | ADAPTER, TORQUE CHECK | 5 | |
| G600-520001-1 | ADAPTER, CABIN DOOR TORQUE | 1 | |
| G601R521104-1 | ADAPTER, CABIN DOOR TORQUE | 7 | |
| G601R522201-1 | TORQUE ADAPTER, PILOT'S HATCH HANDLE | 4 | |
| G601R522202-1 | TORQUE ADAPTER, PILOT'S HATCH HANDLE | 6 | |
| G71001-125 | Adapter,Torque | 4 | |
| GS15052-1 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15530-1 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15530-2 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15549-2 | ADAPTER, TORQUE WRENCH | 1 | |
| GS16268-1 | TORQUE ADAPTER, PISTON & INSERT | 1 | |
| GS16268-2 | TORQUE ADAPTER, PISTON & INSERT | 1 | |
| GS19818-1 | ADAPTER,TORQUE | 5 | |
| GS19820-1 | ADAPTER, PITCHIOCK NUT TORQUE | 2 | |
| GS19822-1 | ADAPTER, BETA NUT TORQUE | 2 | |
| GS20227-1 | ADAPTER, TORQUE PC FLAPPER | 1 | |
| GS20257-1 | TORQUE ADAPTER, PRV | 1 | |
| GS20782-1 | ADAPTER,TORQUE WRENCH | 10 | |
| GS20920-1 | TORQUE ADAPTER, MPSOV CAP | 2 | |
| GS20931-1 | ADAPTER, TORQUE 2 WAY SOLENOID | 2 | |
| GS21252-1 | ADAPTER, TORQUE, FEATHER VALVE | 1 | |
| GS21281-1 | TORQUE ADAPTER, STEP MOTOR CAP | 1 | |
| GS21759-1 | ADAPTER, TORQUE, SOLENOID | 1 | |
| GS24323-1 | TORQUE ADAPTER, BLADE RING | 1 | |
| GS26802-1 | Torque Adapter, Balance Nut | 2 | |
| IAE1F10039 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1M14053 | ADAPTER, WRENCH TORQUE LHT Dwg No.(537250101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1M14054 | ADAPTER, WRENCH TORQUE LHT Dwg No.(537250102) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16486 | ADAPTER,ANTI TORQUE | 3 | |
| K1570A | ADAPTER, TORQUE WRENCH | 1 | |
| K1571A | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B83635 | TORQUE WRECH ADAPTER, BRAKES, MAIN DECK CARGO DOOR | 12 | |
| PWA 102285 | ADAPTER, TORQUE (MISSING) | 1 | |
| PWA 102398 | ADAPTER, COUNTERTORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85292 | ADAPTER, TORQUE (OPTIONAL TO PWA 86227) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85749 | ADAPTER, TORQUE−ELECTRICAL CONNECTOR | 2 | |
| PWA 85791 | ADAPTER, COUNTER-TORQUE | 1 | |
| PWA 85853 | ADAPTER, TORQUE (MISSING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106305 | ADAPTER,TORQUE-EEC ALTERNATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA107602 | ADAPTER, TORQUE - ENGINE, AFT DRAIN MAST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA211413 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA211435 | ADAPTER, TORQUE - PMA ROTOR | 2 | |
| PWA25612 | ADAPTER,TORQUE WRENCH - LPC FLANGE_[PWA25612] | 1 | |
| PWA28940 | ADAPTER,TORQUE - 3.0 BLEED CONTROL_20.3 X 20.3 X 157.5MM / 0.18KG [PWA28940] | 5 | |
| PWA85749 | Adapter,torque | 2 | |
| PWA85791 | ADAPTER, CALIBRATION, HPC, 6 & 12 STG TIEROD TORQUE | 1 | |
| PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA85862 | ADAPTER, TORQUE - ENGINE ASSY, FUEL PUMP, RETAINING BOLTS | 6 | |
| PWA86461 | Adapter, Torque - Engine Assy, Fuel Pump, Retaining Bolt | 7 | |
| PWA87086 | ADAPTER, CALIBRATION, HPC, 11 STG TIEROD NUT TORQUE | 1 | |
| PWA87153 | ADAPTER, CALIBRATION, HPC, 9 STG TIEROD NUT TORQUE | 1 | |
| PWA87198 | ADAPTER,TORQUE | 3 | |
| PWA87546 | ADAPTER,TORQUE | 1 | |
| RB23006782 | ADAPTER, TORQUE, TURBINE ATTACH | 1 | |
| RB23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| RB23006783-A | Adapter, Torque Turbine Attach | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBD29822-5 | ADAPTER, TORQUE WRENCH | 1 | |
| RBT18501 | Adapter, Torque Turbine Attach | 1 | |
| RFP-13001-001-2011 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ROCAGE15011 | TORQUE ADAPTER, BALANCE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SRDH34-3CL | ADAPTER, TORQUE 1/2" DR, 1 1/16" WR (SHAVED) | 1 | |
| SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
| SRES18 | ADAPTER, TORQUE 1/2" DR, 9/16" WR (SHAVED) | 3 | |
| SRES22 | ADAPTER,TORQUE WRENCH;SINGLE END 0.688";SINGLE END 0.500";SINGLE END INTERNAL SPLINE;SINGLE END INTERNAL SQUARE; STEEL;BOX END;|3.000";12;NO. 22 SPLINE SIZE; CHROMIUM; | 3 | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
| ST2580-550A | TORQUE ADAPTER, RATCHETING | 1 | |
| T-05590 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-260674-01 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-372 | ADAPTER, TORQUE ARM | 1 | |
| T-475976-1-14 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-71043 | TORQUE ADAPTER, GLAND RETAINER | 1 | |
| T-71043A | TORQUE ADAPTER, ROD BEARING RETAINER | 1 | |
| T-71681 | Torque Adapter, Pressure Differential Sensor | 1 | |
| T-73786 | Torque Adapter, Relief Valve | 1 | |
| T101561 | ADAPTER,TORQUE WRENCH | 1 | |
| T25817 | Adapter, Motor Drive Shaft Torque | 1 | |
| TN-3496-420 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-01944 | ADAPTER, TORQUE, BOTTLE/VALVE TOOL EXTINCTEUR H2O | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-03015 | ADAPTER, TORQUE 3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27508062000 | ADAPTER,USE TO EXAMINE THE TORQUE/REVOLU | 2 | |
| 98A27804001000 | ADAPTER,TORQUE SET,USED TO ROTATE SLAT D | 3 | |
| 98A32103003000 | TORQUE ADAPTER,USE TO TORQUE REAR ATTACH | 7 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
