| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 21298-180-4 | ADAPTER, | 2 | |
| 21298M225-4 | ADAPTER, | 3 | |
| 7-562122001-601 | ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AS4099-08 | ADAPTER, | 2 | |
| CJMDX21-001 | ADAPTER, | 4 | |
| P15589M1-4 | ADAPTER, | 2 | |
| P35055-4 | ADAPTER, | 3 | |
| PSS73260-3-4-4 | ADAPTER, | 2 | |
| PSS73260-4-4-4 | ADAPTER, | 1 | |
| PSS76700-3-4-4 | ADAPTER, | 6 | |
| PT12993 | ADAPTER, | 1 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 23066522 | ADAPTER, FWD ENGINE LIFTING | 7 | |
| (CALIB) 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 956A1608G01 | ADAPTER, R/I FUEL PUMP (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07104000002 | JACK ADAPTER, SET (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98L54003000000 | ADAPTER ADAPTER,DYNAMOMETRIC NDT RR EA (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98V21503000000 | ADAPTER, R/I VCRU (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) 98V36109001000 | ADAPTER, SET (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) CG9262401-0001 | ADAPTER, CARGO POSITIVE PRESSURIZATION (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) CG9520003-0001 | ADAPTER, HANDLE LOAD - ESCAPE HATCH (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) PWA105794 | Adapter, Support − Engine Assembly, Rear, TEC Left Side (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) PWA105795 | Adapter, Support − Engine Assembly, Rear, TEC Right Side (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| (CALIB) PWA111085 | Adapter, Vacuum Check - Engine Assy. (CALIBRATION) (CALIBRATION) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 008407 | TORQUE - ADAPTER, | 1 | |
| 024398-000 | ADAPTER, VENT VALVE FOR BAYONET TYPE VENT | 4 | |
| 025098-000 | ADAPTER, VENT VALVE | 4 | |
| 02N2FP0165 | SCHRADER VALVE STEM ADAPTER, LARGE TO SMALL BORE | 1 | |
| 03A3LAS2A-DP-A | ADAPTER, OIL FILL WITH THREAD A | 3 | |
| 03A3LAS90-DC | ADAPTER, OIL FILL 90DEGREE | 3 | |
| 03A3LAS90DC | ADAPTER, OIL FILL 90DEGREE | 3 | |
| 05-001 | INFLATING VALVE ADAPTER,NITROGEN | 1 | |
| 05-001 | INFLATING VALVE ADAPTER, NITROGEN -3000PSI | 1 | |
| 057-0852-29 | ADAPTER,WRENCH,SZ 29 | 2 | |
| 057-0853-29 | DEUTSCH ADAPTER, WRENCH | 1 | |
| 057-0853-42 | ADAPTER, WRENCH | 2 | |
| 07-110-9200 | ADAPTER, CADEX | 1 | |
| 08-0704-4000 | ADAPTER, PROPELLER TORQUE | 4 | |
| 08-8064-4000 | ADAPTER, TORQUE PROP | 5 | |
| 10-320-0220 | CABLE, ADAPTER, MAGNETIC PICKUP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 100-059 | (ADAPTER, HYDROSATIC FIXTURE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 100-47838 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00306 | CABLE: ADAPTER,FUEL TEST, | 3 | |
| 101-00314 | CABLE: ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00411 | CABLE: ADAPTER, NO LONGER AVAILABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00423 | HARNESS: ADAPTER, | 5 | |
| 101-00424 | CABLE: ADAPTER,PROBES, | 3 | |
| 101-00425 | CABLE: ADAPTER,SYSTEM, | 4 | |
| 101-00428 | CABLE: ADAPTER,SYSTEM, | 1 | |
| 101-00429 | CABLE: ADAPTER,SYSTEM, | 4 | |
| 101-00433 | CABLE: ADAPTER,PROBES, | 2 | |
| 101-00435 | CABLE: ADAPTER, | 4 | |
| 101-00438 | CABLE: ADAPTER, | 7 | |
| 101-00439 | CABLE: ADAPTER, | 2 | |
| 101-00446 | CABLE: ADAPTER,SYSTEM, | 2 | |
| 101-00448 | CABLE: ADAPTER,PROBES, | 2 | |
| 101-00449A | CABLE: ADAPTER,FUEL QTY TESTER, | 2 | |
| 101-00449B | CABLE: ADAPTER,FUEL QTY TESTER, | 2 | |
| 101-00470 | CABLE: ADAPTER, | 1 | |
| 101-00471 | ADAPTER, CABLE | 5 | |
| 101-00472 | CABLE: ADAPTER, | 1 | |
| 101-00477A | CABLE: ADAPTER, WING TANK | 1 | |
| 101-00477B | CABLE: ADAPTER, FUSELAGE TANK | 1 | |
| 101-00482 | CABLE: ADAPTER,PROBES, | 1 | |
| 101-00489 | CABLE: ADAPTER, BRANSON TANK | 1 | |
| 101-00491 | CABLE: ADAPTER,SYSTEM, | 1 | |
| 101-00560 | CABLE: ADAPTER, | 3 | |
| 101-00561 | CABLE: ADAPTER, | 3 | |
| 101-00624 | ADAPTER, PROBE, FUEL QUANTITY TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00802 | MODULE: ADAPTER,FUEL QTY, CABLE 101-00831 NOT INC2 | 8 | |
| 101-00803 | MODULE: ADAPTER,FUEL QTY, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 101-00807 | MODULE: ADAPTER,FUEL QTY, | 3 | |
| 101-00808 | MODULE: ADAPTER,FUEL QTY, | 6 | |
| 101-00809 | MODULE: ADAPTER,FUEL QTY, | 2 | |
| 101-00814 | MODULE: ADAPTER,FUEL QTY, | 8 | |
| 101-00817 | CABLE: ADAPTER,FUEL QTY, | 6 | |
| 101-00822 | CABLE: ADAPTER,FUEL QTY, | 1 | |
| 101-00823 | CABLE: ADAPTER,PROBE, | 1 | |
| 101-00827 | CABLE: ADAPTER,FUEL QTY, | 1 | |
| 101-00829 | ADAPTER, CABLE PROBE, | 2 | |
| 101-00831 | CABLE: 1900 ADAPTER, BARFIELD INSTRUMENTS | 5 | |
| 101-00855 | CABLE: ADAPTER,FUEL QTY, | 2 | |
| 101-00874 | ADAPTER, HARNESS | 8 | |
| 101-00876 | ADAPTER, HARNESS, FUEL QTY TEST | 7 | |
| 101-00878 | Barfield 101-00878 Adapter, For Malibu Meridian, Piper Aircraft | 2 | |
| 101-01008 | CABLE, ADAPTER, FUEL QUANTITY TEST | 6 | |
| 101-01434 | CABLE: ADAPTER, | 3 | |
| 101-01437 | CABLE: ADAPTER, | 1 | |
| 101-01447 | CABLE: ADAPTER,SYSTEM, | 1 | |
| 101-01456 | CABLE: ADAPTER, | 1 | |
| 101-01463 | ADAPTER, CABLE | 4 | |
| 101-01464 | CABLE: ADAPTER,LEFT INDICATOR | 4 | |
| 101-01465 | CABLE: ADAPTER,RIGHT INDICATOR | 5 | |
| 101-01466 | CABLE: ADAPTER,PROBE,#1, FOR THE ATR42/72 | 4 | |
| 101-01467 | CABLE: ADAPTER,PROBE,#2-6, FOR THE ATR42/72 | 4 | |
| 101-01468 | CABLE: ADAPTER,SYSTEM, | 1 | |
| 102463 | ADAPTER, FASTENER IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10189332 | ADAPTER, GAS FILLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3130-34-1 | ADAPTER, TAIL ROTOR YOKE BUSHING INSTALL | 1 | |
| 109-3501-08-115 | ADAPTER, L/G SHOCK STRUTS NITROGEN CHARGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 109-3501-09-1 | ADAPTER,NOSE/MAIN LG SHOCK STRUT UPPER RING NUT REMOVAL/INSTL | 1 | |
| 109-350108-115 | ADAPTER, L/G SHOCK STRUTS NITROGEN CHARGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1002G01 | ADAPTER,, HORIZONTAL - LIFT FIXTURE (HORIZONTAL ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT (TORQIE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1022 | ADAPTER, COMBUSTION CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1035G06 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1045G02 | ADAPTER, ANTI - TORQUE - FAN STATOR TO FAN DISK, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1105 | ADAPTER, TORQUE, CPLG NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1138 | ADAPTER, MOTORING/LOCKING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10C1138G03 | ADAPTER, MOTORING/LOCKING-CORE ENGINE | 1 | |
| 10C1153 | ADAPTER, PRESSURE CHECK-FUEL M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 10MM | ADAPTER, 2E PRESSURE TESTER | 3 | |
| 115-00057 | BARFIELD 115-00057 PITOT STATIC ADAPTER, 1/2 IN ID | 3 | |
| 115-00058 | KIT: HOSE,PITOT ADAPTER,25FT, | 1 | |
| 1159GSE50250-3 | ADAPTER, FUEL LEAK TEST CAP | 1 | |
| 1159SEM20008-1 | ADAPTER,AIRCRAFT JA | 3 | |
| 1159SEM20008-2 | ADAPTER,AIRCRAFT JA | 4 | |
| 11B71-11963-1 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11B71-11963-2 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11B71-11963-3 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11B71-11963-501 | Tool-adapter,wrench,engine mount ,1-1/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3027 | TORQUE ADAPTER, CAL STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3129G03 | ADAPTER, TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR, SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3447P01 | ADAPTER, TORQUE - OFFSET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C3479G01 | ADAPTER, VSV/VBV | 1 | |
| 11C4613G01 | ADAPTER, ROLL AROUND STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11C4856 | ADAPTER, MOTOR - STARTER PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 12MM | ADAPTER, 2E PRESSURE TESTER | 1 | |
| 13-952 | ADAPTER, 3/4" TO 1" | 1 | |
| 13257 | ADAPTER,SWITCH ACTUATOR | 3 | |
| 14-951 | ADAPTER, 1" TO 3/4" | 1 | |
| 145G0140-1 | ADAPTER, SOCKET | 1 | |
| 145T05934-401 | ADAPTER, REFUELING TEST | 1 | |
| 14MM | ADAPTER, 2E PRESSURE TESTER | 2 | |
| 14PF465 | ADAPTER, DRIVE TOOL SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 14PF465TOOL | ADAPTER, FLAP/SLAT DRIVELINE &FEMALE SPLINE | 7 | |
| 14PF465TOOL-M | FLAP/SLAT ADAPTER, MALE | 4 | |
| 14W1001001 | GSE 251, INLET LIFTINER ADAPTER, RC/VQ GOOD TO QUOTE | 1 | |
| 16U42532 | ADAPTER, TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 170-63080-801-11H1 | ADAPTER, SLING - INSTL/RMV, LEADING EDGE | 5 | |
| 173773 | ADAPTER, OXYGEN SYSTEM | 4 | |
| 173784 | ADAPTER, OXYGEN HP LINE | 18 | |
| 173785 | ADAPTER, OXYGEN SYSTEM ADAPTER | 9 | |
| 185493 | ADAPTER, AIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 11838813 | ADAPTER, PRESSURE GA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 17PF465TOOL | FEMALE SPLINE ADAPTER, FLAP SLAT DRIVELINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18-4-501DA | ADAPTER, FLAP FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18253G-05 | ADAPTER, HEADESET | 9 | |
| 18253G05 | CABLE: ADAPTER,HEADS | 9 | |
| 18821-3 | Barfield 18821-3 Pitot Test Adapter, For Aircraft | 3 | |
| 18821-4 | PITOT ADAPTER, G100/G150/ | 7 | |
| 18821-4 | Pitot Adapter, General Aviation | 7 | |
| 18C1025 | ADAPTER, GRIND - HPTR, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1052 | ADAPTER, HORIZ. BALANCE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1082 | ADAPTER, HORIZONTAL BALANCE - HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1327 | LIFTING ADAPTER, FHF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1609 | ADAPTER, LOCKING - AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 18C1629 | ADAPTER, VSV & VBV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 190E2G0001 | ADAPTER, LEADING EDGE SLING-VERTICAL STABILAZER | 1 | |
| 196-T0071-401 | ADAPTER, SHOCK STRUT - MLG | 1 | |
| 196-T0099-401 | ADAPTER, SHOCK STRUT - NLG | 1 | |
| 196K8004 | ADAPTER, FLEX DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 196K8004 REV B | ADAPTER, FLEX DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 196T06640-401 | ADAPTER, JACKING | 1 | |
| 196T07340-401 | ADAPTER, LIFTING - APU GENERATOR | 1 | |
| 196T07910-401 | ADAPTER, LIFT - AFT FAIRING PYLON | 1 | |
| 19C0021 | ADAPTER,SUPPORT/LIFT-LPC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6189 | ADAPTER, PRESSURE RUBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6258 | ADAPTER, STATIC BALANCE CDP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6258G01 | ADAPTER, STATIC BALANCE CDP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6283 | ADAPTER, REPAIR - PT INTERSTAGE SEAL, STAGES 2-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364G02 | TORQUE ADAPTER, FORWARD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6364G03 | Torque Adapter, FWD Adapter Coupling Nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6833G01 | ADAPTER, STATIC BALANCE-COMPR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6834 | ADAPTER,STATIC BALANCE-COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6834G01 | ADAPTER,STATIC BALANCE-COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6835 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6835G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6836 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6836G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6940 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6940G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6941 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6941G01 | ADAPTER, STATIC BALANCE-COMP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C6993G02 | ADAPTER, SUPPORT - HIGH PRESSURE COMPRESSOR CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8033G01 | Adapter, Splined - TGB, Borescope Inspection | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8061P01 | ADAPTER,DRAIN,LUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8167G01 | ADAPTER,BALANCE-HPT ROTOR FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8195 | ADAPTER, VERTICAL MAINTENANCE DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8195 REV A | ADAPTER, VERTICAL MAINTENANCE DOLLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8208 | ADAPTER, DRIVE - GAS GENERATOR INSP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8208 REV C | ADAPTER, DRIVE - GAS GENERATOR INSP. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8208G02 | SPLINE, ADAPTER, MANUALFRONT DRIVE PAD | 1 | |
| 1C8213G01 | Adapter, Lift - Combustion Liner DLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8315G01 | FIXTURE, I/R-SPLINED ADAPTER, HP COMPRES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8331G02 | ADAPTER, MAINTENANCE CORE ENGINE VERT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C8344G01 | Puller Shaft - Forward Adapter, LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9186 | ADAPTER, SLEEVE-LP TURB ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9316G01 | ADAPTER, SLEEVE - LPT ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9316G02 | ADAPTER, SLEEVE LPT ROTOR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9317G01 | ADAPTER, SUPPORT / LIFT LPC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9362G02 | ADAPTER, LIFT - COMBUSTOR, STAGE 1 OR 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9393G01 | SET,ADAPTER,VIGV/VBV | 2 | |
| 1C9428G01 | ADAPTER, BREAK COMP, STA VANE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1C9626G01 | TORQUE ADAPTER, PRESSURE TUBE/COUPLING NUT-HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1F10108 | ADAPTER, LIFTING/TURN TEC/ENGINE | 1 | |
| 1F60160 | ADAPTER, INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 1P16065 | Adapter, Orientation | 1 | |
| 1R18267 | Adapter, Extractor | 1 | |
| 1R18270 | Adapter, Extractor | 1 | |
| 1R18413 | Adapter, Turnover | 1 | |
| 1R18687 | Adapter, Vane Actuating | 1 | |
| 202 | ADAPTER, FUSELAGE DRAIN VALVE | 1 | |
| 2024 | ADAPTER, FUSELAGE DRAIN VALVE | 10 | |
| 216722 | ADAPTER, PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2000935 | 2-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2000936 | 2-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2000948 | 1-BOTTLE LOW PRESSURE NITROGEN REGULATOR SYSTEM. 15' (457.2 CM) DELIVERY HOSE, AERO PART NUMBER 05-001 INFLATING VALVE ADAPTER, MANUAL, AND CALIBRATION CERTIFICATES. | 1 | |
| 2001115 | WASTE Y-COUPLER W/ GA ADAPTER, WYE, 4-INCH.(FOR DASH-8 ATR MANUAL LAVATORY CART). | 1 | |
| 2001120 | 1-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001121 | 3-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001122 | 3-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2001123 | 4-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2002276 | ADAPTER, SCHRADER, LG TO SMALL | 2 | |
| 2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 200951A | ADAPTER, ECA SINTERS ATR NLG, JACK | 6 | |
| 2024174 | Adapter, Torque | 1 | |
| 2024762-1 | ADAPTER, VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2025018-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2100-10 | METER - SOUND LEVEL, 40 DBC TO 140 DBC, CALIBRATOR, ADAPTER, & CASE. (QUEST TECHNOLOGIES) | 1 | |
| 21298GRM6-180-4 | TEST ADAPTER, | 1 | |
| 21C14030 | ADAPTER, HOIST - HORIZONTAL ENGINE (-39E) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C7718G01 | ADAPTER, STAGE 1 NOZZLE ASSEMBLY AIRFLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C8024G04 | ADAPTER, ENGINE HORIZONTAL HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C8061P01 | ADAPTER,DRAIN,LUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C8188G01 | ADAPTER, COMBUSTOR MODULE TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C8189G01 | ADAPTER, COMBUSTOR MODULE TRUNNIO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 21C8208G01 | ADAPTER, HYDRAULIC, VENT SYSTEM | 1 | |
| 2238A | ADAPTER, 1/2" TO 3/4" | 1 | |
| 2241-C-36 | CABLE-ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 2 | |
| 2241-C-36 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 2 | |
| 2755 | ADAPTER, VALVE CONNECTION | 19 | |
| 25504 | ADAPTER, STEM VALVE (LG TO SM) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 246915 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 253682 | Adapter, Torque Wrench | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 256106 | ADAPTER,SPLINE | 2 | |
| 290166 | ADAPTER,ADAPTER X VALVE TEST | 2 | |
| 293386 | Adapter, Torque, Wrench, Splined | 1 | |
| 298492 | Adapter, Threaded, Removal Carbon Seal | 1 | |
| 298493 | Adapter, Kit, Installation/Removal Seal and Spline Adapter | 1 | |
| 298494 | Adapter, Threaded, Removal Spline Adapter | 1 | |
| 2550136 | Adapter, mounting | 2 | |
| 2550176 | ADAPTER, SPLINE | 2 | |
| 2550719 | Adapter, Speed Cam Lever Assy. | 1 | |
| 2550738 | Adapter, Fork Assy. | 1 | |
| 2557759 | ADAPTER, DRIVE PAD | 1 | |
| 2557791 | ADAPTER, TORQUE, BYPASS VALVE COVER | 1 | |
| 2558453 | SUPPORT ADAPTER, WHEEL HUB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558545 | SUPPORT ADAPTER, WHEEL HUB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558600 | SUPPORT, ADAPTER, INBOARD WHEEL HALF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558603 | SUPPORT ADAPTER, WHEEL HUB (2 IT) | 1 | |
| 2558606 | SUPPORT ADAPTER, WHEEL HUB | 1 | |
| 2558613 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558614 | SUPPORT ADAPTER, OUTBOARD WHEEL HALF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558671 | SUPPORT ADAPTER, IN | 1 | |
| 2558675 | SUPPORT ADAPTER, OUT | 1 | |
| 2558735 | SUPPORT ADAPTER, OUTBOARD (OB), WHEEL HUB, INSTALLATION | 1 | |
| 2558736 | SUPPORT ADAPTER, INBOARD (IB), WHEEL HUB, INSTALLATION | 1 | |
| 2558773 | SUPPORT ADAPTER, REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558790 | SUPPORT ADAPTER, INBOARD(IB) AND OUTBOARD (OB)WHEEL HALF, INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2558806 | SUPPORT, ADAPTER, INSTALLATION OBWH&IBWH | 4 | |
| 2561513 | Adapter, power arm | 2 | |
| 2561579 | Adapter, preset | 2 | |
| 2561591 | ADAPTER, BLEED (#53) | 1 | |
| 2561592 | ADAPTER, BLEED (#70) | 2 | |
| 2561676 | Adapter, power arm | 2 | |
| 2561678 | ADAPTER, ORIFICE | 2 | |
| 20944001 | ADAPTER, INFLATE/DEFLATE VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23005426 | GUIDE Â SPUR ADAPTER, GEAR SHAFT | 4 | |
| 23006782 | ADAPTER, TORQUE, TURBINE ATTACH | 2 | |
| 23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| 23032998 | ADAPTER, LIFTING, TURBINE UNIT | 1 | |
| 23033010 | LIFTING ADAPTER, COMBUSTION LINERS | 1 | |
| 23052530 | ADAPTER, POWER-UNIT ACCESSORY-DRIVE STARTER-SHAFT-DRIVE | 2 | |
| 23055254 | Mount – Trunnion Adapter, Engine Components | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23055299 | LIFTING ADAPTER, BAR | 7 | |
| 23055724 | ADAPTER, BRENCH TORQUE TUBE | 4 | |
| 23055758 | ADAPTER,AFT ENGINE HANDLING | 7 | |
| 23063525-201 | ADAPTER, COMPRESSOR WASH CART | 2 | |
| 23063525-202 | ADAPTER, COMPRESSOR WASH CART | 2 | |
| 23063525-203 | ADAPTER, COMPRESSOR WASH CART | 2 | |
| 23066566 | ADAPTER,FWD SUPPORT | 7 | |
| 23068496 | ADAPTER, MECHANICAL WRENCH | 1 | |
| 23068498-2 | ADAPTER, PULLER | 1 | |
| 235055299 | ADAPTER, LIFTING, ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 23D19238-1 | TOOL-ADAPTER, INFLATE/DEFLATE VALVE | 4 | |
| 2423F | KIT: ADAPTER,STATIC PORT, | 1 | |
| 2471007-7 | ADAPTER, TORQUE TENSIOMETER | 4 | |
| 250B 1/4 | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
| 2558603TE | SUPPORT ADAPTER, WHEEL HUB | 1 | |
| 2558606TE | SUPPORT ADAPTER, WHEEL HUB | 1 | |
| 2571005-001 | ADAPTER, DRIVE, ANTI-SKID TRANSDUCER | 1 | |
| 257562-129 | ADAPTER, VALVE TEST | 1 | |
| 257562-29 | ADAPTER,VALVE TEST | 1 | |
| 25Y759A | ADAPTER, OLEO OIL CHARGING | 6 | |
| 25YTS119R1A | ADAPTER, PRIMING TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 26033522 | ADAPTER, FWD ENGINE LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 28-0-1067H | ADAPTER, FRONT FUSELAGE JACK | 4 | |
| 28-0-1380E | ADAPTER, NOSE WHEEL | 6 | |
| 28-0-1380F | ADAPTER, NLG AXLE NUT | 4 | |
| 28-0-1381D | ADAPTER, MAIN WHEEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 28-0-3180F | ADAPTER, NLG AXLE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 28-0-4922 | ADAPTER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 280377-1 | ADAPTER, WRENCH (ADAPTER) | 3 | |
| 281714-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281868-1-1 | ADAPTER, HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281875-1-1 | ADAPTER, TORQUE WRENCH, SPLINED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 281877-1-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 285540-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 287027-1 | ADAPTER,HOISTING | 1 | |
| 287277-1-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 287554-1 | valve test adapter, adapts downstream flange of valve to test setup | 1 | |
| 287555-1 | valve test adapter, adapts upstream flange of valve to test setup | 1 | |
| 289133-1 | ADAPTER, VALVE TEST | 1 | |
| 289461-1 | ADAPTER, HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 289507-1 | ADAPTER,TORQUE WRENCH | 2 | |
| 290222-1 | ADAPTER, TAIL SHUTOFF | 1 | |
| 290435-1-1 | ADAPTER, PNEUMATIC, VALVE TEST A330 | 4 | |
| 291251-1 | Adapter, Torque Wrench | 1 | |
| 291B300-005 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-005A | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-010 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-010A | ADAPTER, HI-TORQUE | 1 | |
| 291B300-015 | ADAPTER, HI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 291B300-015A | ADAPTER, HI-TORQUE | 1 | |
| 294895-1 | ADAPTER, VALVE TEST | 1 | |
| 294896-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 296445-1 | Adapter, Wrench Spanner (3IT) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 29650-1 | ADAPTER, TEST STAND, ACCESSORIE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 297641-1 | ADAPTER, SHAFT, STRETCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 297642-2 | ADAPTER, SHAFT, STRETCHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 298074-1 | ADAPTER, VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 298180-7X10 | SEAL: STATIC ADAPTER,10PK, FOR STATIC ADAPTER | 3 | |
| 298341-1 | ADAPTER, SHAFT, OIL PUMP TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 29843001 | ADAPTER, ORAL INFLATION VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2A1996-1 | ADAPTER, VACUUM FITTING | 2 | |
| 2C 14689G01 | ADAPTER, LIFT - COMBUSTOR | 2 | |
| 2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING NUT, HP TURB ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G01 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G02 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G03 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G04 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14040G05 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 3 | |
| 2C14040G06 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 1 | |
| 2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 1 | |
| 2C1404G05 | TORQUE ADAPTER, PRESSURE TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14178 | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14178 REV A | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14178G01 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME AFT FLANGE | 2 | |
| 2C14187G01TK | ADAPTER, LIFT FAN FRAME-HORIZONTAL | 1 | |
| 2C14203G01 | ADAPTER, GANTRY HANG | 2 | |
| 2C14219 | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14219 REV A | ADAPTER, LIFT-COMBUSTOR & STAGE 1 OR 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14290G01 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14635 | ADAPTER,MOTORING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14635 REV C | ADAPTER,MOTORING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14635P02 | ADAPTER, MOTORING CORE ENGINE | 3 | |
| 2C14649 | ADAPTER, CORE MOTORING - BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14685 | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | 1 | |
| 2C14685 REV A | ADAPTER, ANTI-TORQUE-FAN STATOR TO FAN DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14685G01 | ADAPTER, ANTI-TORQUE | 2 | |
| 2C14686 | ADAPTER, LIFT-LOW PRESS. COMPRESSOR | 1 | |
| 2C14686 REV P | ADAPTER, LIFT-LOW PRESS. COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14686G01 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14686G02 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 1 | |
| 2C14686G03 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14686G04 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14686G05 | ADAPTER, LIFT-LOW PRESSURE COMPRESSOR | 3 | |
| 2C14689 | ADAPTER, LIFT-COMBUSTOR | 1 | |
| 2C14689 REV E | ADAPTER, LIFT-COMBUSTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14689G01 | ADAPTER, LIFT - INSTALL/REMOVE | 2 | |
| 2C14695G01 | ADAPTER, LIFT - HPT NOZZLE, STAGE 1 | 2 | |
| 2C14703 | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14703 REV A | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14703G01 | ADAPTER, LIFT-STAGE 2 HPT NOZZLE | 2 | |
| 2C14717G01 | ADAPTER, FAN STTR CASE FWD FLANGE | 4 | |
| 2C14726 | ADAPTER,PEDESTALENG.FORWARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14726 REV J | ADAPTER, PEDESTAL ENG. FORWARD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14726G03P11 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14726G03TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
| 2C14726G04 | ADAPTER, PEDESTAL ‐ ENGINE, FORWARD | 4 | |
| 2C14726G05 | ADAPTER, PEDESTAL - ENGI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14730G01 | ADAPTER, PEDESTAL – COMPRESSOR STATOR, FWD | 2 | |
| 2C14730P03 | ADAPTER, PEDESTAL – COMPRESSOR STATOR, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14737 | ADAPTER, LIFT-FAN CASE & FRAME AFT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14737 REV E | ADAPTER, LIFT-FAN CASE & FRAME AFT. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14737G01 | ADAPTER, LIFT ‐ AFT STATOR/FRAME, HORIZONTAL | 1 | |
| 2C14738 | ADAPTER, R/I - STAGE 1 FAN DISK NUTS | 1 | |
| 2C14742G01 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14742G05P48 | ADAPTER, PEDESTAL - ENGINE, FORWAD | 1 | |
| 2C14780 | ADAPTER, PEDESTAL - COMP REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14780 REV E | ADAPTER, PEDESTAL - COMP REAR FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14780G01 | ADAPTER, PEDESTAL-CRF | 2 | |
| 2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
| 2C14793 | ADAPTER, LOCKING - CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14795 | ADAPTER, LIFT-ENGINE AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14795 REV A | ADAPTER, LIFT-ENGINE AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14900G01 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE | 1 | |
| 2C14903G01 | ADAPTER,BAL 3-9 SPOOL (AFT) AND 11-14 SP | 1 | |
| 2C14905G01 | ADAPTER, FORCE BALANCE ‐ STAGE 10 HPCR | 1 | |
| 2C14907G01 | DRIVE ADAPTER, BALAN | 1 | |
| 2C14908G01 | DRIVE ADAPTER, BALANCE ‐ HPCR ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14922G01 | ADAPTER,BALANCE-LPT MODULE | 1 | |
| 2C14922G02 | ADAPTER, BALANCE LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C14923P03 | ADAPTER,BALANCE-LPT ROTOR,STAGE 1 | 1 | |
| 2C14978 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C18006G01 | ADAPTER, LIFT LPC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C18020G02 | ADAPTER, ANTI-TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C5101G01 | ADAPTER, FAN ROTOR DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C5241G01 | ADAPTER, FAN SHAFT LOCKNUT TORQUE | 1 | |
| 2C5693G01 | ADAPTER, ACCESSORY DRIVE GEARBOX HOIST | 1 | |
| 2C5694 | ADAPTER, HOIST CORE ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C5694G01 | ADAPTER, CORE ENGINE HOIST | 1 | |
| 2C6009 | PULLER ADAPTER, #4 BRG | 2 | |
| 2C6047 | ADAPTER, PULLER - | 2 | |
| 2C6048 | ADAPTER, PULLER-AFT AIR | 2 | |
| 2C6049 | ADAPTER, PULLER, HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6105 | ADAPTER,DRIVE-TURBINE REVERSER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6189 | ADAPTER, PRESSURE TUBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6189 REV K | ADAPTER, PRESSURE TABLE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6189G07 | ADAPTER, PRESSURE TUBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6359G01TK | ADAPTER, PEDESTAL-ENGINE FORWARD | 1 | |
| 2C6360G01 | ADAPTER, PEDESTAL-COMPRESSOR STATOR, FORWARD | 2 | |
| 2C6627 | ADAPTER,INSTALL-NO.4B BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6627G01 | ADAPTER, INSTL, RTNR RIVET NO.4B BRG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6827 | ADAPTER, ASSY - LP COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6834 | ADAPTER, ANTITORQUE - FAN STATOR TO DISK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6860 | ADAPTER, ASSY HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6888G03 | ADAPTER, BALANCE-STAGE 2 COMPRESSOR DRIVE AND BLAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937 | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937 REV U | ADAPTER, TORQUE, SET-COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6937G08 | ADAPTER, TORQUE, SET ‐ COMPRESSOR ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C6I89 | ADAPTER, PRESSURE TABLE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C8094 | ADAPTER, GRINDING-HP TURB ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C8094G04 | ADAPTER, GRIND/INSPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81000 | ADAPTER, HOIST - ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81007G03 | ADAPTER, HOIST - ENGINE | 3 | |
| 2C81037G01 | ADAPTER, HPT/LPT COMBUSTION HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81039G01 | ADAPTER, HPT MODULE LIFT AND TURN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81040 | ADAPTER, HOIST/GUIDE COMBUSTI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81040G01 | ADAPTER, HOIST/GUIDE COMBUSTI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81043G01 | ADAPTER, LPT MODULE HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81080G01 | ADAPTER, MAIN MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81102 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81102G01 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81114G01 | ADAPTER, HOIST-FAN ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81162 | ADAPTER, HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81162G01 | ADAPTER, HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81178 | ADAPTER, TORQUE NO 3 BEARING L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81178G01 | ADAPTER, TORQUE NO 3 BEARING L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81194 | ADAPTER, FAN ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81194G01 | ADAPTER, FAN ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81302 | ADAPTER, HOIST STG 1 NOZ/COMB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81302G01 | ADAPTER, HOIST STG 1 NOZ/COMB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81401G02 | ADAPTER, TORQUE BALANCE ARBOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81407G02 | (FUTURE PROCUREMENT P/N: 2C81407G03) ADAPTER, TORQUE – HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81407G03 | ADAPTER, TORQUE – HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81407G04 | ADAPTER, HPT LOCKNUT TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81416G01 | ADAPTER, HOIST - HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81430G01 | ADAPTER, VERTICLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81437 | ADAPTER, HOIST HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81437G01 | ADAPTER, HPT ROTOR HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81446G01 | ADAPTER,WRENCH ARC-HPT ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81454G01 | ADAPTER, HOIST, DISKS HPT ROTO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81463 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81463G01 | ADAPTER, HIGH TORQUE - HPT LOC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81463G02 | ADAPTER, TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81464G01 | ADAPTER, TORQUE - HPT LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81503G01 | ADAPTER, BAL TATIC NO.3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81504P01 | ADAPTER, BALANCE STATIC NO.4&6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81518 | ADAPTER, HOIST LPT MODULE CF34 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81518G02 | ADAPTER, HOIST LPT MODULE CF34 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81519G02 | ADAPTER, HORIZONTAL SLING, LPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81555P01 | ADAPTER, SLING LPT ROTOR (SLIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81601G01 | ADAPTER, HOIST-AGB | 2 | |
| 2C81652G01 | ADAPTER, INSTALL BEARING, AXIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81653G01 | ADAPTER, INSTALLER - BEARING, AXIS-D | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81656G01 | ADAPTER, REMOVAL, BEARING, AXI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81657G01 | ADAPTER, REMOVAL, BEARING, AXI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81658G01 | ADAPTER, REMOVAL, BEARING, AXI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81659G01 | ADAPTER, REMOVAL, BEARING, AXI | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81660G01 | ADAPTER, REMOVAL, AXIS-G FRONT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81661G01 | ADAPTER, REMOVAL, REAR BEARING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81663P01 | ADAPTER, INSTALL, AIR/OIL SEPA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81664G01 | ADAPTER, REMOVAL, AIR/OIL SEPA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81665G01 | ADAPTER, TORQUE, LOCKNUT, AXIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81666G01 | ADAPTER, TORQUE, LOCKNUT AXIS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81667G01 | ADAPTER, TORQUE, LOCKNUT, AIR/ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C81962G01 | ADAPTER, HOIST - STAGE 1-2 BLISK, HPC ROTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90500G01 | ADAPTER, HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90500G02 | ADAPTER, POWER UNIT HOIST | 2 | |
| 2C90501G01 | ADAPTER, TRANSPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90502G01 | LIFTING SLING ADAPTER,PGB | 1 | |
| 2C90502G02 | ADAPTER, PGB HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C90509G01 | ADAPTER, ENGINE HOIST | 1 | |
| 2C91002 | ADAPTER, ON-WING MAINTENANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91002G01 | ADAPTER, ON WING MAINTENANCE | 1 | |
| 2C91003G01 | ADAPTER, LPT MODULE AND HPT ROTOR HOIST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91035G01 | ADAPTER, HPT ROTOR VERTICAL HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91046G01 | ADAPTER, HOIST - COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91065G01 | ADAPTER, COMBUSTION HOIST/PILOT | 1 | |
| 2C91071 | ADAPTER, BORESCOPE-IGN PORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91071G01 | ADAPTER, BORESCOPE IGNITER PORT UNIVERSAL POSITIONING | 3 | |
| 2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
| 2C91086G01 | ADAPTER, FORWARD ENGINE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91102G01 | ADAPTER, HPT ROTOR LOCKNUT SPANNER WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91195G01 | ADAPTER, HOIST-FRONT COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91349 | ADAPTER,TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2C91349G01 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2F10065 | ADAPTER, AIRFLOW CHECK | 1 | |
| 2F1026-1-IAS | Fitting adapter, Drain | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2F1032-IAS | Fitting adapter, Fill | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2F10366 | Adapter, Airflow (Outlet) - Engine Assy, No. 5 Brg. Compartment Cover, Installation & Oil Scavenget Outer, TEC | 1 | |
| 2F10416 | Adapter, Airflow (Outlet) | 1 | |
| 2F60160 | ADAPTER, OUTLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2MIT65B40719 | ADAPTER, OIL FILL - CONSTANT SPEED DRIVE (CSD) | 2 | |
| 2MIT65B81276-1 | ADAPTER, TORQUE WRENCH - BEARING RETAINER NUT | 1 | |
| 2MIT65B82215 | MISCELLANEOUS TOOL - TORQUE WRENCH ADAPTER, AILERON FORCE LIMITER | 2 | |
| 2MIT65B90115 | ADAPTER, OIL SYSTEM SWITCH | 1 | |
| 2P16248 | Adapter, Pressure Test | 1 | |
| 2TE65B00776 | HARNESS CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 1 AND 4 MAIN TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 2TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
| 2V98-006 | ADAPTER, FUEL DRAINING | 1 | |
| 2V98‐006 | ADAPTER, FUEL DRAINING | 1 | |
| 300279-100 | ADAPTER, INFLATE/DEFLATE VALVE | 3 | |
| 31169-9950 | ADAPTER, PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 314150 | Adapter, Flush Type - Alemite Midget | 10 | |
| 3170003-1 | JACK ADAPTER, ENGINE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 318049 | ADAPTER, ALEMITE GREASE GUN, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 31BNC-N-50-1 | ADAPTER, COAXIAL | 2 | |
| 327265 | ADAPTER, RUBBER, 90 DEGREE | 3 | |
| 330-024 | FEED-THRU BULKHEAD JACK ADAPTER, 5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 33410-125-4 | ADAPTER, STATIC PITOT | 2 | |
| 33410FFAB125-4 | BARFIELD 33410FFAB125-4 STATIC TEST ADAPTER, FOR FIXED WING AIRCRAFT | 7 | |
| 33410HB-125 | BARFIELD 33410HB-125 STATIC TEST ADAPTER, FOR AIRC | 3 | |
| 33410HH125-4 | BARFIELD 33410HH125-4 STATIC TEST ADAPTER, FOR AIRCRAFT | 7 | |
| 33410LH-125-4 | STATIC ADAPTER, PN: 33410LH-125-4. QTY 2EA | 20 | |
| 33410LH125-4 | Barfield 33410LH125-4 Static Test Adapter, For Boeing Aircraft | 20 | |
| 33410MX-67-4 | ADAPTER, PITOT STATIC TEST | 2 | |
| 33455M70-4 | Barfield 33455M70-4 Static Test Adapter, For Bell Aircraft | 3 | |
| 3400A0000-01W01 | ADAPTER, MANUAL AC-TUATION | 1 | |
| 3401346-1 | KIT, ADAPTER, AFT CARGO DOOR REMOVAL | 1 | |
| 3402046-1 | ADAPTER, TORQUE, 245 SPLICE BOLTS | 1 | |
| 3402814-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402814-2 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3402822-1 | ADAPTER, TORQUE WRENCH F.S 737-817 . 25/32" | 1 | |
| 3402822-3 | ADAPTER, TORQUE WRENCH F.S 737-817 . 13/16" | 1 | |
| 3402822-5 | ADAPTER, TORQUE WRENCH F.S 737-817 . 15/16" | 1 | |
| 3403215-1 | ADAPTER, HIGH PRESSURE OXYGEN SERVICE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 341663 | ADAPTER, TORQUE WRENCH | 1 | |
| 347-3001-14GSE | ADAPTER,PRESSURE RELIEF DOOR-ENGINE | 1 | |
| 35-92239-0001 | ADAPTER, JACKING REAR FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92281-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92282-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 35-92285-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92286-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35066GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| 357-9314-000 | ADAPTER,CONN | 1 | |
| 357-9919-030 | CONNECTOR, ADAPTER, RF | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3617300-1 | ADAPTER, FUEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 362-04180A | TORQUE - ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029822-5 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029823-5 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369029983 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369A6300-80906 | WRENCH ADAPTER, LANDING GEAR DAMPER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 369D29983 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 38A, 38A-1 | ADAPTER, TORQUE LIMITING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3916732-1 | Spanner - Transducer Adapter, Anti-skid | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3916732-501 | Spanner - Transducer Adapter, Anti-skid | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3916732-503 | Spanner - Transducer Adapter, Anti-skid | 9 | |
| 3916732-505 | Spanner - Transducer Adapter, Anti-skid | 1 | |
| 3981308-1 | ADAPTER, ANTI-SKID TRANSDUCER SPINNER. | 4 | |
| 3A2613 | ADAPTER, VACUUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3A3653-1 | ADAPTER, INLET | 2 | |
| 3A3658-1 | TEST ADAPTER, VACUUM FITTING | 2 | |
| 3A3895-1 | ADAPTER, VACUUM FITTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3F60160 | ADAPTER, INLET TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G 1205G00231 | ADAPTER, M/R DAMPER OIL FILLING | 2 | |
| 3G1205G00231 | ADAPTER, M/R DAMPER OIL FILLING | 2 | |
| 3G2405G00531 | CABLE ADAPTER, BATTERY | 1 | |
| 3G2505G00231 | ADAPTER, RESCUE HOIST OPERATOR CONTROL (FD-03-00) | 1 | |
| 3G3205G01032 | ADAPTER,WHEEL BRAKE SYSTEM BLEEDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G3205GH01032 | ADAPTER,WHEEL BRAKE SYSTEM BLEEDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G09031 | TROLLEY ADAPTER, M/R HEAD SUPPORT (HE-19 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G09032 | TROLLEY ADAPTER, SWASHPLATE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G09131 | TROLLEY ADAPTER, SWASHPLATE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6205G09132 | TROLLEY ADAPTER, SWASHPLATE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6405G05431 | TROLLEY ADAPTER, T/R HEAD SUPPORT HE-21-00 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6505G00731 | TROLLEY ADAPTER, IGB SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3G6505G00831 | TROLLEY ADAPTER,TGB SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3MIT65B80307-1 | ADAPTER,PROTRACTOR | 7 | |
| 3TE65B00776 | HARNESS CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 1 AND 4 RESERVE, CENTER WING AUXILIARY TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 3TSJ60B00002 | Adapter, Tilt Table, INS Unit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 552 | ADAPTER,METER;| | 2 | |
| 4215 | ADAPTER,SOCKET WREN | 1 | |
| 5007 | ADAPTER, CHARGING | 4 | |
| 40024 | Adapter, Harness | 15 | |
| 403187-1 | ADAPTER, TORQUE WRENCH | 1 | |
| 403188-1 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 403190-1 | ADAPTER, TORQUE WRENCH, VERTICAL STABILIZER | 1 | |
| 40A002 | ADAPTER, STRAIGHT FIXED, PROBE LELM 12W TO BNC LOCATOR PRB. TO PHASEC 2S | 1 | |
| 4158AS1240-1 | ADAPTER, FUEL FLUSH AND LEAK CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 57268 | ADAPTER,MECHANICAL, | 1 | |
| 60449 | ADAPTER, SLUDGE TUBE REMOVAL ADQUIRIR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 440019 | ADAPTER, RECHARGE | 1 | |
| 4507100101-007 | Superceeded to 4507100102-001 m ain jack pad adapter, no tie down clamp for Lear 23,24,25,38,29,31,3 | 4 | |
| 501087 | Adapter, Arbor Press Ram | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460004750 | ADAPTER, TORQUE LOADING | 2 | |
| 460004787 | ADAPTER, SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 460005513 | ADAPTER, FILLING | 5 | |
| 460006404 | ADAPTER, TORQUE | 17 | |
| 460007011 | MLG NUT ADAPTER, A340 A/C | 26 | |
| 460007156 | ADAPTER, CHARGING - MLG | 12 | |
| 460007196 | ADAPTER, TORQUE | 5 | |
| 4916701-1 | ADAPTER, FORWARD AND AFT FUSELAGE JACK POINT (2) | 9 | |
| 4916702-1 | ADAPTER, WING JACK (2) | 2 | |
| 4916702-501 | ADAPTER, WING JACK (2) | 10 | |
| 4916706-527 | ADAPTER, TORQUE; MLG AXLE NUT | 5 | |
| 4916781-1 | Adapter, Torque | 1 | |
| 4916787-1 | ADAPTER, TORQUE, PASSENGER AND SERVICE DOOR LATCH | 6 | |
| 4920011510759 | ADAPTER, LOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4A3844-9 | ADAPTER, TRANSDUCER (-16) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 4MIT65800772 | ADAPTER, WRENCH, SUMP DRAIN VALVE | 1 | |
| 4MIT65B00732 | ADAPTER,SOCKET DRIVE-FOR T.R. | 2 | |
| 4MIT65B00772 | WRENCH - ADAPTER, SUMP DRAIN VALVE | 10 | |
| 50067-0000-01 | ADAPTER,TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5020-01 | ADAPTER,OXYGEN CHARGING | 8 | |
| 5268-C-24 | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | 1 | |
| 5268-C-36 | CABLE - ADAPTER, TWO | 2 | |
| 5268-C-XX | CABLE - ADAPTER, TWO SINGLE BANANA PLUGS TO BNC MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 52725A34 | BIT; HEX SHANK ASSORTMENT WITH ADAPTER, 30-PIECE, STEEL, SLOTTED SQUARE, EXTERNAL HEX | 1 | |
| 53207-2001 | ADAPTER, MANUAL ACTUATOR OPERATION | 3 | |
| 541243-1 | ADAPTER, VALVE HOSE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 550T05648-401 | Adapter,Assy-Pressure Test,Engine Shroud | 1 | |
| 550T05648-401 | ADAPTER,ASSY-PRESSURE TEST,ENGINE SHROUD | 1 | |
| 550T05654-401 | Adapter,Assy-Pressure Test,APU Shroud | 1 | |
| 550T05654-401 | ADAPTER,ASSY-PRESSURE TEST,APU SHROUD | 1 | |
| 550T05658-401 | ADAPTER, JACKING-WING | 1 | |
| 550T05658-401 | ADAPTER,JACKING-WING | 1 | |
| 550T05666-401 | ADAPTER,SLING-HS LIFTING | 1 | |
| 550T05666-401 | ADAPTER,SLING-HS LIFTING | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 550T05670-401 | ADAPTER,SET-LASER TRACKER | 1 | |
| 555T10053-401 | ADAPTER, CLAMP SHELL CONNECTION | 1 | |
| 555T10053-401 | ADAPTER, CLAMP SHELL CONNECTION | 1 | |
| 575108-100 | ADAPTER, HAND PUMP FITTING | 1 | |
| 5837036-1 | ADAPTER, HEATER, IMPELLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 58522089 | ADAPTER, SOCKET WRENCH MODEL 7789-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5963440-1 | TEST ADAPTER, CADC REMOTE | 6 | |
| 5A2957-2 | ADAPTER, ELECTRICAL TEST SET | 1 | |
| 5F60160 | ADAPTER, OUTLET, 1.40 INCH (35.56 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5MIT65B01231-1 | CROWFOOT WRENCH - ADAPTER, RETAINER NUT, BODY LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 5TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, CENTER WING TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6-76011 | Adapter, F5 Mlg | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6-76020 | Adapter, F5 Nlg | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 60159-101 | ADAPTER, CABLE ASSEMBLY | 1 | |
| 61100-101 | ADAPTER, VACCUM | 2 | |
| 61169-101 | TOOL - ADAPTER, INFLATE/DEFLATE | 1 | |
| 61657-2 | GAUGE: ADAPTER,WEAR | 9 | |
| 61657-2 | GAUGE: ADAPTER,WEAR | 9 | |
| 63023-101 | ADAPTER, VACUUM | 1 | |
| 63023-103 | ADAPTER, VACUUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 63687-1 | ADAPTER, ORAL TUBE TEST | 2 | |
| 64866 | ADAPTER, SLUDGE TUBE REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 64882-101 | ADAPTER, VACUUM 64882-101 (METAL PACKING FIXTURE) | 1 | |
| 64886-103 | ADAPTER, VACUUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 64980 | ADAPTER, TEST CLUB - ALL ENGINES WITH AS-127 TYPE 2 PROPELLER FLANGE WITH BUSHINGS FOR 7/16 IN. PROPELLER ATTACHING BOLTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 64981 | ADAPTER, TEST CLUB ADQUIRIR O FABRICAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65037- | ADAPTER, CABLE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 65037-1 | ADAPTER, CABLE ASSEMBLY 60159-101 (NO LONGER PROCUR- ABLE), 65037-1, OR 69525-1 | 1 | |
| 66048-4 | ADAPTER, PRESSURE CHUCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6645000002-001 | COMPUTER, INTERFACE ADAPTER, MAINTENANCE | 3 | |
| 66514-101 | ADAPTER, VACUUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 66731-1 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 2 | |
| 6783 | ADAPTER, NEEDLE NOSE | 1 | |
| 66631 | NYLON FAN ADAPTER, F | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6795633 | ADAPTER, GP MOUNT | 2 | |
| 6795637 | ADAPTER, GP REAR BEARING NUT | 2 | |
| 6796173 | ADAPTER, HOISTING | 1 | |
| 6796464 | ADAPTER, LIFTER COMPRESSOR ASSEMBLY | 2 | |
| 6796515 | LIFTING ADAPTER, COMBUSTION LINERS | 1 | |
| 6796535 | ADAPTER, GAGE | 3 | |
| 6796539-201 | ADAPTER, LIFTING | 1 | |
| 6796539-202 | ADAPTER, LIFTING | 1 | |
| 6796575-B | ADAPTER, COMBUSTION LINER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6796644 | ADAPTER, STAND-TURBINE UNIT | 2 | |
| 6796665 | ADAPTER, LIFTING, COMPRESSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6796692 | ADAPTER, STAND REDUCTION GEAR | 2 | |
| 6796694 | ADAPTER, STAND, ACCESSORY DRIVE HOUSING | 2 | |
| 6796697 | ADAPTER, STAND, COMPRESSOR SECTION | 2 | |
| 6796965 | ADAPTER, ATTACHING COMPRESSOR UNIT (AIR INLET HOUSING) TO MAINTENANCE STAND | 2 | |
| 6797236 | ADAPTER, HOLDING PROPELLER SHAFT | 1 | |
| 6797418 | ADAPTER, REDUCTION GEAR REAR CASE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6797637 | ADAPTER, TORQUE | 2 | |
| 6798865 | ADAPTER, HOLDING, COMBUSTION LINER ASSEMBLY | 1 | |
| 6799523 | ADAPTER, TURNING | 2 | |
| 6799619 | ADAPTER, LIFTING TURBINE | 3 | |
| 6799620 | ADAPTER, LIFTING - TURBINE UNIT ASSEMBLY | 3 | |
| 6799723 | ADAPTER, LOCATING, COMBUSTION LINER ASSEMBLY TRANSITION | 1 | |
| 6799727 | ADAPTER, LOCATING, COMBUSTION LINER ASSEMBLY TRANSITION SECTION | 1 | |
| 6799776 | ADAPTER, SUPPORT, POW | 1 | |
| 6799790 | ADAPTER, TURNING | 3 | |
| 6847740 | ADAPTER, MOUNTING, VERTICAL VIBRATION PICKUP | 1 | |
| 6891350 | ADAPTER, SUPPORT TURBINE | 2 | |
| 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT | 1 | |
| 69002647-001 | ADAPTER, CONNECT CABLE PART NUMBER 704-2863-032 TO HHDLU. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 69525-1 | ADAPTER, CABLE ASSEMBLY 60159-101 (NO LONGER PROCUR- ABLE), 65037-1, OR 69525-1 | 3 | |
| 6F6220G04131 | TROLLEY ADAPTER, M/R HEAD SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6230G00231 | TROLLEY ADAPTER, SWASHPLATE SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6420G01231 | TROLLEY ADAPTER, T/R HEAD SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6521F00131 | TROLLEY ADAPTER,IGB SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F6521G00131 | TROLLEY ADAPTER,IGB SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6F7100F00331 | ADAPTER, ENGINE WASHING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 6MIT65B00112 | ADAPTER, VENTILATION, FUEL TANK | 5 | |
| 6TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-362300019-601 | ADAPTER, TORQUE BARREL SUPPORT, 30MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-363110010 | ADAPTER,TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-562110085-001 | TORQUE ADAPTER, M/R MIXER SUPPORT BOLT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-562173036-001 | BRAKE ADAPTER, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7-562181100-603 | ADAPTER, APACHE MAGAZINE AND TANK TRANSFER SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70-25P08 | ADAPTER, TURRET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 704-2567-001 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 70700-77395-101 | TORQUE ADAPTER, EXPANDABLE PIN, STATIONA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 712C1001 | ADAPTER, WING/INBD, TRIPOD JACK / COLUMBUS | 1 | |
| 724-PSEU | ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 2 | |
| 72653-1 | ADAPTER, INSTALLATION | 3 | |
| 72823-40 | TEST ADAPTER,STATIC PORT | 1 | |
| 747FLYAWAY KIT | ADAPTER,NLG JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 772D33858S | ADAPTER, OXYGEN CHARGING | 4 | |
| 79000218-1 | ADAPTER, FCE BATTERY TEST(SPL-13450) | 1 | |
| 79000494-1 | ADAPTER,DUAL NOZZLE,OIL BURNER;|ANGLE LUBE ADAPTER&NOZZLE; | 3 | |
| 7C2216G01 | Adapter,strongback | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7C2244 | ADAPTER, PEDESTAL - CDN. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 7TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 2 AND 3 RESERVE TANKS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 80072-4 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG | 5 | |
| 80086-2 | CABLE ADAPTER, PMAT 2000, 12FT, CONNECTS TO HAMILTON SUNSTRAND LOAD CABLE FOR ERJ APU | 2 | |
| 80088-1 | CABLE - ADAPTER, ELECTRONIC FLIGHT BAG, LAPTOP (EFB) | 2 | |
| 8028182-10 | ADAPTER, M-9 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 810-2007-KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO1 | 8 | |
| 810-2007/KVS | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 8 | |
| 810-325 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 19 | |
| 81046 | ADAPTER, NO. 81046 (ADAPTER NO. 81046) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 832622 | ADAPTER, SOCKET, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834710-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834718 | Adapter, Removal Bearing | 1 | |
| 81267600 | ADAPTER, RETAINER, DISCHARGE BOSS | 4 | |
| 81267700 | ADAPTER, FILL BOSS | 4 | |
| 834718-1 | ADAPTER, REMOVAL, BE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834724 | Adapter, Torque | 1 | |
| 834724-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834727 | Adapter, Removal, Turbine Module | 1 | |
| 834727-1 | ADAPTER, REMOVAL, TU | 1 | |
| 834728 | Adapter, Lifting Engine Compressor Module | 1 | |
| 834728-1 | ADAPTER, LIFTING, ENGINE COMPRESSOR MODULE | 1 | |
| 834729 | Adapter, Lifting | 1 | |
| 834729-1 | ADAPTER, LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834730 | Adapter, Torque, Clutch | 1 | |
| 834734-1 | SET,ADAPTER,ASY & MA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834737 | Adapter, Press | 1 | |
| 834737-1 | ADAPTER, PRESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834744 | Adapter, Lifting, Rotating Group | 1 | |
| 834744-1 | ADAPTER, LIFTING, RO | 1 | |
| 834745 | Adapter, Torque | 1 | |
| 834745-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834746 | Adapter, Removal, Seal | 1 | |
| 834746-1 | ADAPTER, REMOVAL, SE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834750 | Adapter, Link | 1 | |
| 834757 | Adapter, Torque | 1 | |
| 834757-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759 | Adapter, Step Plate | 1 | |
| 834759-11 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-2 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-3 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-4 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-5 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-6 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-7 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834759-8 | ADAPTER, STEP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834773-1 | ADAPTER, LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 834784 | Set, Adapter, Assembly Stand | 1 | |
| 835058 | Adapter, Transfer | 1 | |
| 835643 | Adapter, Mounting | 1 | |
| 856A-2502-G01 | Adapter, Drain Oil tank | 2 | |
| 856A-2502-G06 | Adapter, Drain Oil tank | 11 | |
| 856A-2573-G01 | Adapter, Puller | 6 | |
| 856A-2700-G01 | Adapter, Puller | 13 | |
| 856A-3500-G01 | ADAPTER, PULLER | 17 | |
| 856A-3509-G01 | Adapter, Locking AGB | 15 | |
| 856A-3510-G01 | Adapter, Lift & Turn | 2 | |
| 856A-3510-G02 | Adapter, Lift & Turn | 1 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BE | 2 | |
| 856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G06 | TORQUE ADAPTER, I/R - NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G06 | TORQUE ADAPTER, I/R - NO. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G07 | TORQUE ADAPTER,INSTA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 4 | |
| 856A1000G09 | TORQUE ADAPTER, I/R - NO. 3 BRG LOCKIN | 6 | |
| 856A1006G01 | ADAPTER, TORQUE - COMPR STATOR NUT | 8 | |
| 856A1009 | ADAPTER, VERTICAL LIFT FIXTURE (LIFT FIXTURE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1009G01 | ADAPTER, VERTICAL LIFT FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1009G02 | Adapter, Vertical Lift Fixture (lift fixture adapter) | 10 | |
| 856A1022G03 | Adapter, Torque Wrench KIT | 12 | |
| 856A1039 | ADAPTER, IGB TO WILTON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1098 | ADAPTER, TORQUE HPT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1098G01 | ADAPTER, TORUE WRENCH | 5 | |
| 856A1102 | ADAPTER, HORIZANTAL LIFT-FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1102 G02 | Adapter, Horizontal Lift Fixture | 1 | |
| 856A1102 G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE | 9 | |
| 856A1102G01 | ADAPTER, HORIZANTAL LIFT-FIXTURE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1102G02 | ADAPTER, HORIZANTAL LIFT-FIXTURE | 1 | |
| 856A1102G03 | ADAPTER, HORIZONTAL LIFT - FIXTURE （TO ADAPT THE VARIOUS HORIZONTAL LIFT FIXTURES FOR LIFTING IN THE VERTICAL AND HORIZONTAL POSITIONS.） | 9 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1136 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 1 | |
| 856A1136G02 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 4 | |
| 856A1369G01 | FIXTURE ADAPTER, LINI-GAGE - DATA | 1 | |
| 856A1369G02 | FIXTURE ADAPTER, LINI-GAGE - DATA ACQUISITION SYST | 1 | |
| 856A1467G01 | Adapter, Pressure Check - Fuel Manifold | 7 | |
| 856A1523 | ADAPTER, DRIVE - AGB CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1523P01 | ADAPTER, DRIVE-AGB CRANK PAD | 2 | |
| 856A1609 | ADAPTER, MAINTENANCE STAND TO FAN CASE (ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1609G02 | ADAPTER, MAINTENANCE STAND TO FAN CASE (ADAPTER) | 1 | |
| 856A1815 | ADAPTER, MANUAL DRIVE PAD, CORE ENGINE ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1815G04 | ADAPTER, MANUAL DRV PAD, CORE ENG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1815G06 | ADAPTER, MANUAL DRIVE PAD, CORE ENGINE ROTATION | 2 | |
| 856A1817G01 | ADAPTER, TORQUE, HPTN SUPPORT BOLT (DAC CONFIG 01 PRE SB 72-0209) | 1 | |
| 856A1823 | ADAPTER, DRIVE - AGB CRANK PAD CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYD | 19 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
| 856A1836 | ADAPTER, FWD FAN STATOR STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A1836G01 | ADAPTER, MAINTENANCE STAND TO FAN CASE (ADAPTER) | 8 | |
| 856A1865G01 | TORQUE ADAPTER,I/R-NO.3BRG 1 | 3 | |
| 856A2502 | ADAPTER, DRAIN-OIL TANK OUTILLAGE DE VIDANGE | 3 | |
| 856A2502 REV H | ADAPTER, DRAIN-OIL TANK OUTILLAGE DE VIDANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2502G02 | ADAPTER,DRAIN-OIL TANK | 1 | |
| 856A2502G06 | ADAPTER, DRAIN-OIL TANK | 11 | |
| 856A2573 | ADAPTER, PULLER - LPT SHAFT PLUG (PULLER ADAPTER) | 2 | |
| 856A2573G01 | ADAPTER, PULLER | 6 | |
| 856A2606G01 | Adapter, Drain Lub Unit | 1 | |
| 856A2607G01 | ADAPTER, LOCKING - CORE ENGINE (LOCKING ADAPTER) | 4 | |
| 856A2614G01 | Adapter, Torque Wrench | 4 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2663 | ADAPTER, PULLER- SPLITTER FAIRING | 2 | |
| 856A2663G01 | PULLER ADAPTER, SPLITTER FAIRING | 23 | |
| 856A2685 | ADAPTER, PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2685G03 | ADAPTER, PULLER | 4 | |
| 856A2700 | FAN BLADE SPACERS - ADAPTER, PULLER | 3 | |
| 856A2700G01 | ADAPTER,PULLER-FAN BLADE SPACERS | 13 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 3 | |
| 856A2717 | ADAPTER, LOCK - CORE ENGINE (LOCK ADAPTER) | 4 | |
| 856A2717G01 | ADAPTER, LOCK CORE ENGINE | 18 | |
| 856A2727G01 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | 13 | |
| 856A2732 | FLANGE ADAPTER, TGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2742G03 | FLANGE ADAPTER, TGB | 4 | |
| 856A2780 | ADAPTER, HANDLING (HANDLING ADAPTER) | 2 | |
| 856A2780 REV C | ADAPTER, HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A2780G01 | ADAPTER, HANDLING | 2 | |
| 856A2780G02 | ADAPTER, HANDLING | 8 | |
| 856A2957G01 | ADAPTER, INNER SEAL, LUBRICATION UNIT | 8 | |
| 856A3267 | ADAPTER, TEST RIG - NO. 1 AND 2 BEARING SUPPORT AIR FLOW CHECK (TEST RIG ADAPTER) | 1 | |
| 856A3267G02 | ADAPTER, TEST RIG - N°1 AND N°2 BRG SUPPORT, AIR FLOW CHECK | 9 | |
| 856A3385 | ADAPTER,TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3385P03 | ADAPTER,TORQUE WRENCH | 7 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419 REV B | ADAPTER, PULLER COVER OIL INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3419G01 | ADAPTER, PULLER COVE | 1 | |
| 856A3419G02 | ADAPTER, PULLER COVE | 21 | |
| 856A3455G01 | - ADAPTER, DRIVE, FORWARD - LPT SHAFT BALANCING | 2 | |
| 856A3466 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3466G01 | ADAPTER, COUNTERTORQUE - TGB STALOCK NUTS (COUNTERTORQUE ADAPTER) | 5 | |
| 856A3468G01 | - ADAPTER, DRIVE - FWD LPT SHAFT BALANCING (OPTIONAL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3471P01 | ADAPTER, TEST RIG - AIR FLOW CHECK | 4 | |
| 856A3471P02 | TOOL-ADAPTER, SPLINE FUEL | 11 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3500G01 | ADAPTER, PULLER-FAN BLADE SPACERS | 17 | |
| 856A3500G01 | ADAPTER, PULLER | 17 | |
| 856A3509 | ADAPTER, LOCKING AGB | 4 | |
| 856A3509 G01 | ADAPTER, LOCKING - CORE ENGINE WITH | 15 | |
| 856A3509 REV C | ADAPTER, LOCKING AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3509G01 | ADAPTER, LOCKING - CORE ENGINE (LOCKING ADAPTER) | 15 | |
| 856A3510 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3510 G02 | ADAPTER, LIFT AND TURN - 1 AND 2 BRG SUPPORT | 1 | |
| 856A3510G02 | ADAPTER, LIFT AND TURN N°1 AND N°2 BRG SUPPORT. | 1 | |
| 856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3510G04 | ADAPTER, LIFT AND TURN - MODULE 2 (ADAPTER) | 6 | |
| 856A3514 | ADAPTER, RESIDUAL TORQUE ADAPTER | 1 | |
| 856A3514P02 | ADAPTER, RESIDUAL TORQUE (ADAPTER) | 5 | |
| 856A3517 | ADAPTER, COUNTERTORQUE (ADAPTER) | 1 | |
| 856A3517G02 | ADAPTER, COUNTERTORQUE ADAPTER | 5 | |
| 856A3625G01 | ADAPTER, INNER SEAL, LUBRICATION UNIT | 11 | |
| 856A3627 | TEST ADAPTER, FUEL MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3707G05 | ADAPTER,PUL.F/B SPACER | 11 | |
| 856A3721 | ADAPTER, LIFT/TURN #1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 856A3721G03 | ADAPTER,LIFT/TURN #1 | 9 | |
| 856A3750G02 | ADAPTER, COUNTERTORQUE | 12 | |
| 856A3810 | ADAPTER, AIR-DRY OUT | 1 | |
| 856A3810G01 | ADAPTER, AIR DRIVE - DRY OUT ENGINE SUMPS | 8 | |
| 85750700-001-89 | ADAPTER, FLAP DRIVE | 2 | |
| 86-4101-1 | ADAPTER, PRESSURE OILER, 1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9004 | ADAPTER,VALVE | 2 | |
| 864721 | Adapter, Lifting, Load Compressor | 1 | |
| 877635 | Adapter, Hydrostatic Test | 1 | |
| 878040 | ADAPTER, RECHARGE | 1 | |
| 878609 | Adapter, Recharge | 1 | |
| 8600063 | ADAPTER, COMPRESSOR WASHING | 1 | |
| 8C2013 | ADAPTER, GRIND - HP TURBINE ROTOR, FWD & AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2024 | ADAPTER, ANTI-TORQUE - HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2042 | ADAPTER, DRIVE - BALANCE, HPTR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2043 | ADAPTER, TORQUE - NO. 4 S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2107 | ADAPTER, SUPPORT - HPCR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2116 | ADAPTER, GRIND/BALANCE-HPCR, AFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2135 | ADAPTER, GENSPEC HPCR (FWD END DOWN) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2192 | ADAPTER, GENSPEC - HPCR, AFT BALANCE ARBOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2345 | ADAPTER, SUPPORT - K FLANGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2504 | ADAPTER, BRACKET - STANDARD ROLLOVER STAND | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2539 | ADAPTER, TORQUE FAN SHAFT EXTENSION NUT AND SENSOR, SHAFT NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2637 | ADAPTER, INSTALL/REMOVE - FMU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2638 | ADAPTER, INSTALL/REMOVE - AIR STARTER/MFP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2639 | ADAPTER, INSTALL/REMOVE - LUBE UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2647 | ADAPTER, INSTALL/REMOVE - HX COMBO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2758 | ADAPTER, TORQUE - HPT AIR DUCT (LONG VERSION USED WITH RTR LOCK) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2824 | ADAPTER, DISASSEMBLY - CDP JOINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8C2918 | ADAPTER, GUIDE - NO 2 BRG INSTALL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8D3A40S | ADAPTER, OPTICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8D3A60D | ADAPTER, OPTICAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8G4900G00531 | ADAPTER, APU WASHING | 1 | |
| 8G6420G00131 | TROLLEY ADAPTER, T/R HEAD SUPPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 8TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
| 901747-1 | ADAPTER, VALVE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9142729637 | ADAPTER, HOOK WRENCH, SZ 29 | 1 | |
| 92700-10355-101 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 92700-10377-041 | TORQUE ADAPTER, PITCH CONTROL ROD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 929A071-1 | ADAPTER, OPTIONAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 932-200 | ADAPTER, LIFTING SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 932A218-1 | ADAPTER, PRESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 932A219-1 | ADAPTER, PRESS | 1 | |
| 9404M32 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9404M32P01 | ADAPTER, PRESERVATION KIT - PSEC MANIFOLD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M31 | ADAPTER, POWER ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M31 REV B | ADAPTER, POWER ARM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M42 | ADAPTER, SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M42 REV B | ADAPTER, SPLINE, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M45 | ADAPTER, TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M45 REV B | ADAPTER, TORQUE LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M47 | ADAPTER, SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M47 REV B | ADAPTER, SPLINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M51 | ADAPTER, SPLINE TORQUE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9441M51 REV B | ADAPTER, SPLINE TORQUE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 944B451-3 | ADAPTER, PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9458M56 | ADAPTER, SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9471M47 | ADAPTER ADAPTER, OFFSET - CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9471M47G01 | ADAPTER, OFFSET - CRANK PAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9471M47P01 | ADAPTER, OFFSET -CRANK PAD | 3 | |
| 9471M47P02 | ADAPTER, OFFSET-CRANK PAD | 2 | |
| 9471M48 | ADAPTER, TURN - CORE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9471M48P01 | ADAPTER, TURN-CORE MANUAL DRIVE PAD | 5 | |
| 9480M03 | ADAPTER, POWER ARM TRANSFER GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92000-0203 | ADAPTER, SOCKET WRENCH | 1 | |
| 95-92235-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92236-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92241-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92242-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92245-0001 | ADAPTER, LH JACKING REAR FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92246-0001 | ADAPTER, RH JACKING REAR FUSELAGE01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92251-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92252-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 95-92307-0001 | ADAPTER, JACKING | 1 | |
| 95-92308- 0001 | ADAPTER, JACKING MLG | 1 | |
| 95-92308-0001 | ADAPTER, JACKING M.L.G | 1 | |
| 95-93016-0003 | ADAPTER,HOISTING | 1 | |
| 9506605 | ADAPTER, CONNECTOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1283 | ADAPTER, ROLL OVER STAND - CDN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1608 | ADAPTER, FUEL PUMP | 2 | |
| 956A1608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP | 4 | |
| 956A1613 | ADAPTER, FUEL METERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1613G01 | ADAPTER, FUEL METERING UNIT /1/2 | 5 | |
| 956A1614 | ADAPTER, SCU/SVA | 1 | |
| 956A1614G01 | ADAPTER, SCU / SVA | 5 | |
| 956A1616 | ADAPTER, INSTALL/REMOVE - EEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A1616G01 | ADAPTER, INSTALL/REMOVE – EEC | 2 | |
| 956A1634G01 | ADAPTER, PROGRAMMING CABLE - HJ9B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A3608G01 | ADAPTER, REMOVAL/INSTALLATION - FUEL PUMP (LRU) | 3 | |
| 956A3616G01 | ADAPTER,INSTALL/REMOVE-FADEC | 4 | |
| 956A6046 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 2 | |
| 956A6046G01 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN | 2 | |
| 956A6046G02 | ADAPTER, PLATE AND SPHERICAL JOINT | 4 | |
| 956A6046G03 | ADAPTER, PLATE & SPHERICAL JOINT FAN MODULE | 4 | |
| 956A613G01 | ADAPTER, FUEL METERING UNIT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7314 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7610 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7613 | ADAPTER, LOCK - CORE ENGINE | 2 | |
| 956A7613G02 | ADAPTER, LOCK -CORE ENGINE | 5 | |
| 956A7615 | ADAPTER, REMOVE/INSTALL - OIL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A7615G02 | ADAPTER, REMOVE/INSTALL - OIL TANK | 3 | |
| 956A8018 | ADAPTER, PLATE AND SPHERICAL JOINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8018G01 | ADAPTER, PLATE AND SPHERICAL JOINT-FAN MODULE. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8018G02 | ADAPTER, PLATE AND SPHERICAL JOINT - FAN MODULE | 2 | |
| 956A8674G02 | ADAPTER, DRAIN - OIL SYSTEM RECOMMENDED 2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 956A8674G03 | ADAPTER, DRAIN - OIL SYSTEM | 1 | |
| 956A8679G01 | ADAPTER, LOCK - CORE ENGIN | 3 | |
| 956A8931G01 | Adapter，drive splines-gear，TGB/AGB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 968RB | ADAPTER, VALVE CONNECTION | 12 | |
| 97A28002534000 | ADAPTER, VENTING VAPOR SEAL | 5 | |
| 97A28002549000 | ADAPTER, O-RING SEALS | 4 | |
| 97L28001013102 | METALIC DRAIN ADAPTER,METALIC DRAIN ADAPTER, FUEL TEST PRESSURE GAUGE | 1 | |
| 980-101-000-011 | CABLE - ADAPTER, ADVANCED AIRBORNE VIBRATION MONITOR | 2 | |
| 985.L92.03.901 | SPLINE ADAPTER, AUTO PILOT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A07108635000 | ADAPTER, MAIN JACK TAIL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27407514200 | ADAPTER, A330-200, COMPLETE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A27608015150 | ADAPTER,COMPL. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A28007570000 | ADAPTER,VENT/DRAIN VALVE, APU | 36 | |
| 98A28101000000 | Adapter, Water Drain | 24 | |
| 98A32201003000 | ADAPTER, DRAIN MAST, | 7 | |
| 98A35207599 | HOSE-ADAPTER,ALTITUDE SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98A35207599000 | HOSE-ADAPTER,ALTITUDE SWITCH | 25 | |
| 98A35207599000 | HOSE ADAPTER,ALTITUDE SWITCH | 25 | |
| 98A54403024000 | ADAPTER,DYNOMETRIC RIB 1 | 7 | |
| 98A54403024003 | ADAPTER, DYNAMOMETRIC | 9 | |
| 98AMS172322005 | WRENCH ADAPTER, NUT MS172322 | 9 | |
| 98AMS172331003 | ADAPTER, WRENCH, SOCKET TYPE | 4 | |
| 98AMS172344002 | ADAPTER, WRENCH, HOOK TYPE | 9 | |
| 98D-278-04001-000 | ADAPTER, SLAT DRIVE | 28 | |
| 98D07103500000 | Jack Adapter, Fuselage | 31 | |
| 98D07203002000 | Adapter, shoring FR42 | 6 | |
| 98D27504035000 | ADAPTER,TORQUE WRENCH;|TORQUE ADAPTER TRUNNION UNT; | 20 | |
| 98D28104000040 | Adapter, Water Drain | 4 | |
| 98D28108293000 | ADAPTER, WATER DRAIN | 19 | |
| 98D28108293001 | Adapter, Water Drain | 7 | |
| 98D28108293002 | ADAPTER, WATER DRAIN, ADDITIONAL CENTER TANK | 11 | |
| 98D28108559000 | ADAPTER ADAPTER, TUBE - DRAIN VALVE, AC | 8 | |
| 98D28108562000 | ADAPTER, PRESSURE DRAIN-ACT | 10 | |
| 98D32303000000 | ADAPTER, WRENCH-SOCKET SET NLG | 26 | |
| 98D32403001000 | ADAPTER, BRAKE UNIT NUT | 19 | |
| 98D32403003000 | DRIVING ADAPTER, WHEEL TACHOMETERS | 18 | |
| 98D32403005001 | ADAPTER, BRAKE UNIT | 22 | |
| 98D34103002000 | ADAPTER, FLUSHING, AIR DATA SYSTEM | 31 | |
| 98D34103002100 | ADAPTER, FLUSHING, AIR DATA SYSTEM | 13 | |
| 98D34103003000 | ADAPTER, PITOT - PNEUMATIC CLEANER | 21 | |
| 98D38108002000 | ADAPTER, DRAIN MAST | 8 | |
| 98D38108002000 | ADAPTER, DRAIN MAST | 8 | |
| 98D38308234001 | Adapter, Pressure Switch | 13 | |
| 98F07103500001 | JACK ADAPTER, NOSE | 19 | |
| 98F07107501000 | Adapter, AFT Jacking | 17 | |
| 98F12108458000 | ADAPTER, FILLING - INPUT GEARBO | 6 | |
| 98F27508121000 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508121001 | WRENCHA WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508726000 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F27508726001 | WRENCH - ADAPTER, TRUNNION | 1 | |
| 98F34103000000 | ADAPTER, COVER, STATIC PROBE | 16 | |
| 98F34103000001 | ADAPTER,COVER-STATIC PROBE | 6 | |
| 98F71201001104 | Adapter,GSE - RRT700 AFT | 5 | |
| 98F71201001106 | Adapter, RRT700 FWD | 6 | |
| 98F71203503000 | ADAPTER, BOOTSTRAP CRADLE | 6 | |
| 98L07101000000 | ADAPTER, JACK - NOSE | 4 | |
| 98L07203003000 | ADAPTER, LOAD CELL | 2 | |
| 98L07203004000 | ADAPTER, LOAD CELL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L07209001000 | ADAPTER,SHORING-THS | 2 | |
| 98L27208453000 | ADAPTER, TURN BARREL - RUDDER | 3 | |
| 98L27209011000 | ADAPTER, LIFTING - UPPER AND LO | 2 | |
| 98L27503000000 | ADAPTER,FLAP PCU | 4 | |
| 98L27803000000 | ADAPTER,SLAT PCU | 4 | |
| 98L29203001000 | ADAPTER, GREEN LEGHS | 1 | |
| 98L29203002000 | ADAPTER, YELLOW LEGHS | 2 | |
| 98L34203500000 | ADAPTER,COVER STATIC PROBE-STAND BY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98L36103002000 | ADAPTER, ENGINE BLEED TEST SET | 28 | |
| 98L36103002001 | ADAPTER, ENGINE BLEED TEST SET | 8 | |
| 98L36103002044 | ADAPTER, ENGINE BLEED TEST SET SYSTEM | 4 | |
| 98L36103002064 | ADAPTER, ENGINE BLEED TEST SET | 3 | |
| 98L54003000000 | ADAPTER, DYNAMOMETRIC NDT RR EA | 1 | |
| 98L55308525000 | ADAPTER, SUPPORT STAND - RUDDER | 1 | |
| 98S07003000001 | ADAPTER, WING JACK | 16 | |
| 98S07008010000 | ADAPTER, JACK - FWD FUSELAGE | 19 | |
| 98S27003002000 | ADAPTER, TRIM ACTUATOR MANUAL DRIVER | 10 | |
| 98S61005002000-REV A | Adapter, Torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 98V07104003000 | Adapter,wing Jacking | 5 | |
| 98V21503000000 | ADAPTER, R/I VCRU | 6 | |
| 99-8107-6000 | ADAPTER, RIGHT ANGLE DRIVE | 5 | |
| 99046 | 724-PSEU - ADAPTER, 100-240 VAC IN, 24VDC 0.25A OUT, UK & EURO PLUGS | 1 | |
| 9970-957-195 | ADAPTER, FLANGE | 1 | |
| 9970-957-199 | ADAPTER, PULLER - COVER, PUMP ASSY | 1 | |
| 99A34103000000 | ADAPTER, STATIC PORT | 6 | |
| 99A34103001000 | ADAPTER, STATIC PORT | 7 | |
| 99A34103002000 | ADAPTER, STATIC PORT | 7 | |
| 99A34103004000 | ADAPTER, STATIC PORT | 8 | |
| 9C1091 | ADAPTER, TORQUE #4 BEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C1156 | ADAPTER, VARIABLE C G BAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C1204G01 | ADAPTER, IDG JACK STAND | 4 | |
| 9C1261 | ADAPTER, GE90-115B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C1393G01 | Set -Adapter, VSV/VBV | 1 | |
| 9C1700G02 | ADAPTER, WRENCH | 2 | |
| 9C2000 | ADAPTER,TOOL SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C3138 | ADAPTER, KIT-TUBE EXTENSION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C3403G01 | ADAPTER, INSTALL/REMOVAL - LINE REPLACEABLE UNITS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C6018 | ADAPTER, LIFT-ENGINE, FWD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 9C6022G01 | Adapter, Lift - Aft Engine | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A-C148659-1/13 | ADAPTER, FLAP ACT FL | 1 | |
| A07001-11 | ADAPTER, JACKING | 15 | |
| A07002-11 | ADAPTER, JACKING | 3 | |
| A07003-1 | ADAPTER, JACKING. | 14 | |
| A07008-25 | ADAPTER, JACK | 1 | |
| A12007-14 | ADAPTER, WELDMENT | 2 | |
| A12007-23 | ADAPTER, INFLATION | 9 | |
| A21001 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-1 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-10 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-11 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-12 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-13 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-14 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-15 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-16 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-17 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-18 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-19 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-2 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-20 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-21 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-22 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-23 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-24 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-25 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-26 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-27 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-28 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-29 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-3 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-30 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-31 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-32 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-33 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-34 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-35 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-36 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-37 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-38 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-39 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-4 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-40 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-41 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-42 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-43 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-44 | ADAPTER, HOIST, AIRCONDITIONING PACK | 13 | |
| A21001-45 | ADAPTER, HOIST, AIRCONDITIONING PACK | 10 | |
| A21001-46 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-47 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-5 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A21001-6 | ADAPTER, HOIST, AIRCONDITIONING PACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27021-98 | ADAPTER, CONTROL, WHEEL 757/767 | 11 | |
| A28005-48 | ADAPTER,TESTLEAK,APU FUELLINE SHROUD | 20 | |
| A28005-81 | ASSEMBLY - ADAPTER, APU FUEL LINE SHROUD | 6 | |
| A2A | ADAPTER, 3/8" INTERNAL DRIVE X 1/2" EXTERNAL DRIVE | 4 | |
| A31007-30 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | 3 | |
| A31007-49 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | 6 | |
| A31007-59 | CABLE - ADAPTER, TELEDYNE TESTER. USE WITH TELEDYNE DFDAU TESTER. | 16 | |
| A31007-59-REVH | CABLE - ADAPTER, TELEDYNE TESTER. USE WITH TELEDYNE DFDAU TESTER.^T1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A32020-1 | ADAPTER, DRAG STRUT | 13 | |
| A32021-1 | WRENCH ADAPTER, GLAND NUT | 7 | |
| A32025-1 | WRENCH ADAPTER, WHEEL RETAINING AXLE NUT, NLG | 19 | |
| A32069-7 | WRENCH ADAPTER, RETAINER NUT, ANTI-SKID TRANSDUCER | 19 | |
| A32075-10 | ADAPTER, ANTI-SKID T | 21 | |
| A32075-9 | ADAPTER, ANTI-SKID T | 3 | |
| A32101-1 | WRENCH ADAPTER, AXLE NUT, NLG | 27 | |
| A32101-2 | WRENCH ADAPTER, AXLE NUT, NLG | 7 | |
| A38001-68 | ADAPTER, GROUND HANDLING EQUIPMENT | 11 | |
| A51300 | TOOL – ADAPTER, INFLATE/DEFLATE VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A71013-19 | SPACER ASSEMBLY - HOIST ADAPTER, INTEGRATED DRIVE GENERATOR | 6 | |
| A71049-1 | ADAPTER, PT2 PROBE - USE POST PW S/B 73-175 | 12 | |
| AB35001-T5U | HOSE - ADAPTER, ALTITUDE SWITCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ACS28001 | ADAPTER, STRAIGHT, NON-LOCK, CONNECTOR | 4 | |
| AD56592-1 | LANYARD, ADAPTER, SOLENOID TEST | 1 | |
| AD56599-1 | ADAPTER, CONNECTOR BACKSHELL | 1 | |
| ADAPTER | ADAPTER, 0.5 INCH UNF(BT)TC/75-113-00-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ADAPTER,TEST | ADAPTER,TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ADP-00331 | Torque adapter, tie bolt nut | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE -00599-401 | ADAPTER, HOST,MLG | 6 | |
| AGE-00065-403 | ADAPTER, HOISTING NLG | 5 | |
| AGE-00483-001 | ADAPTER,APU TRANSPORT | 10 | |
| AGE-00586-001 | ADAPTER, FLAP FLEXIBLE SHAFT | 5 | |
| AGE-00599-401 | ADAPTER, MAIN LANDING GEAR HOISTING | 6 | |
| AGE-00602-001 | TORQUE-ADAPTER, WING/FUSELAGE BOLT | 3 | |
| AGE-01524-401 | ADAPTER, CABIN PRESSURIZATION TEST | 1 | |
| AGE-01588-401 | ADAPTER, WHEEL CHANGE-NLG | 1 | |
| AGE-01834-401 | ADAPTER, APU TRANSPORT (ALT AGE-01834-401) | 7 | |
| AGE-04162-401 | ADAPTER, HYDRAULIC JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE-04510-401 | ADAPTER, SET JACKING | 3 | |
| AGE-05499-401 | ADAPTER, WHEEL CHANGE-MLG | 1 | |
| AGE-70069 | ADAPTER, APU TRANSPORT | 5 | |
| AGE00065-403 | ADAPTER, HOIST NLG | 5 | |
| AGE11540 | ADAPTER, TORQUE | 1 | |
| AGE13178 | ADAPTER, HP OUTLET | 2 | |
| AGE13180 | ADAPTER, LP INLET | 2 | |
| AGE13182 | ADAPTER, HPINLET | 2 | |
| AGE13255 | ADAPTER, ASSY., HOLDING FIXTURE-T50 AMAD | 1 | |
| AGE13505 | ADAPTER, PUMP PULLER | 1 | |
| AGE15011 | TORQUE ADAPTER, BALANCE NUT | 5 | |
| AGE16258 | ADAPTER, TORQUE | 1 | |
| AGE17139 | ADAPTER, BREAKOUT, 320 PIN | 1 | |
| AGE17294 | KIT, ADAPTER, 787 GCU AND BPCU HARNESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AGE70069 | ADAPTER, APU TRANSPORT | 5 | |
| AGE‐01834‐401 | Adapter, Apu Transport | 7 | |
| AID-00838 | Adapter, Fuel injector torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AK1-380PAX | SET-ADAPTER,SUPPLEMENTAL COOLING SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AK737 | KIT-ADAPTER, PITOT / STATIC (B737-CLASSIC) | 2 | |
| AM-1928-900 | ADAPTER, BOOTSTRAP CF6-80C2 | 1 | |
| AM-1928-C40 | AFT BOOTSTRAP ADAPTER, LH SHOWN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AM-1928-D40 | AFT BOOTSTRAP ADAPTER,RH SHOWN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AN894-4-2D | ALUMINUM ADAPTER, STRAIGHT, TUBE TO BOSS | 2 | |
| AP-208 | ADAPTER, VENTILATION, FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AP208 | ADAPTER, UNDERWING - FUEL TANK VENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AP208J06 | ADAPTER, VENTILATION, FUEL TANK | 1 | |
| AP2D-DC | ADAPTER, LOCATOR TO DEFECTOMETER PROBE 2MHZ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| APM3900 | ADAPTER,TOWING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AS5180D04 | FITTING,ADAPTER,BULKHEAD,FLARED TO HOSE | 3 | |
| AST-2877 | ADAPTER, TORQUE WRENCH | 7 | |
| AT-71049 | Torque Adapter, Compensator | 1 | |
| AT-71053 | Torque Adapter, Compensator | 1 | |
| AT-71055 | TORQUE ADAPTER, BEARING AND GLAND RETAINERS | 1 | |
| AT-71055 | Torque Adapter, Bearing and Gland Retainers | 1 | |
| AT-71055A | Torque Adapter, Bearing and Gland Retainers | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AT-71597 | TORQUE ADAPTER, RETAINER SLEEVE | 1 | |
| AT-71597 | Torque Adapter, Retainer Sleeve | 1 | |
| AT-71687 | TORQUE ADAPTER, RIGGING RETAINING RING | 1 | |
| AT-71687 | Torque Adapter, Rigging Retaining Ring | 1 | |
| AT-73786 | Torque Adapter, Relief Valve | 1 | |
| AT120D/FF-IV86 | ADAPTER, OPTICAL TIP, OLYMPUS, AT120D/FFIV86, 120 DEG VIEW, 6 MM TIP,4-190 MM FIELD, FOR IPLEX IV86 VIDEOSCOPE, GREEN | 2 | |
| AT120S/NF-IV84 | Side Viewing , 120 degree field of view Tip Adapter, Depth of field 1 - 20 mm | 2 | |
| AT31799 | ADAPTER, TORQUE WRENCH | 5 | |
| AT80D/FF-IV86 | ADAPTER, OPTICAL TIP, 80 DEGREE, OLYMPUS, AT80D/FF”¬Â•–IV86, 6 MM,35 TO Γꂧ MM, GREEN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| AV13-1672 | ADAPTER, SLIP RING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B12006-1 | ADAPTER,LUB. SPOILER OUTER HINGE | 13 | |
| B17713-1 | ADAPTER, VALVE OUTLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B19285-1 | CHARGING ADAPTER, FILLER VALVE | 1 | |
| B19453-1 | ADAPTER, TORQUE WRENCH VALVE TO CYLINDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B19456 | ADAPTER, LIGHTING SYSTEM TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B19456-1 | ADAPTER, LIGHT SYSTEM TEST | 2 | |
| B20004-21 | LEVERAGE ADAPTER, ACCESS PANEL | 14 | |
| B20004-42 | LEVERAGE ADAPTER, ACCESS PANEL | 11 | |
| B25002 | FUNCTIONAL TEST EQUIPMENT -0 ADAPTER, OFF WING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B25002-37 | FUNCTIONAL TEST EQUIPMENT - ADAPTER, OFF WING ESCA | 4 | |
| B27029 | LUG SPANNER -0 TORQUE ADAPTER, RUDDER JACKSHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B27029-1 | LUG SPANNER - TORQUE ADAPTER, RUDDER JACKSHAFT | 1 | |
| B27075-20 | HOIST ADAPTER, INST/REM FLAP TRACK | 4 | |
| B28007-1 | ADAPTER, PWA | 3 | |
| B28007-2 | ADAPTER, ROLLS ROYCE | 5 | |
| B31001 | CABLE -0 ADAPTER, BUS ANALYZER, ARINC 429 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| B31001-1 | CABLE - ADAPTER, BUS ANALYZER, ARINC 429 | 2 | |
| B32008-1 | HOIST ADAPTER, RETRACT ACT. MLG | 3 | |
| B32015-38 | LIFTING ADAPTER, SET | 6 | |
| B362-04180A | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-09111 | TORQUE - ADAPTER, USED ON UNDERWATER LOCATOR BEACO | 5 | |
| B6783 | NEEDLE ADAPTER, LUBRICATION | 3 | |
| B71005-37 | ADAPTER, ENG MOUNT | 5 | |
| B78008-7 | WRENCH ADAPTER, | 7 | |
| B957 | ADAPTER, TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BEI3840 | WHEEL ADAPTER, HIGH SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BLPAIM134 | IMPACT ADAPTER, SIZE (M) 1" TO (F) 3/4" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BNC-P2D | ADAPTER, STRAIGHT FIXED, PROBE LELM 12W TO BNC LOCATOR PRB. TO PHASEC 2S | 1 | |
| BNC-Z/50-500K | BNC to Miz-20 & 22 adapter, 50-500KHz | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| BNC-Z21/50-500K | Miz 21 to female BNC adapter, 50-500KHz | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C07004-2 | NRP,ADAPTER,AIRCRAF | 9 | |
| C07007-1 | ADAPTER, JACK - FORWARD BODY (3/4 SPHERICAL RADIUS BALL) | 14 | |
| C07007-11 | ADAPTER, JACK - FORWARD BODY (3/4 SPHERICAL RADIUS BALL) | 8 | |
| C07007-17 | ADAPTER, JACK - FWD BODY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C07007-19 | ADAPTER, JACK - FORWARD BODY (3/4" SPHERICAL RADIUS BALL) | 19 | |
| C21005-1 | Adapter,ins/rem,air cond'g pack (27) | 4 | |
| C21005-70 | JACK ADAPTER - INSTALLATION/REMOVAL, AIR CONDITIONING PACK : NOTEIF THE ADAPTER, SPL-1608, IS NOT USED, A MINIMUM OF THREE PERSONS WILL BE NECESSARY TO COMPLETE THIS TASK. | 8 | |
| C22971 | JACK ADAPTER,USED TO PARTIALLY LIFT THE | 6 | |
| C27020-1 | Adapter, Torque Wrench - L.E. Slat | 3 | |
| C27060-1 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST | 21 | |
| C27060-22 | ASSEMBLY - ADAPTER, CONTROL WHEEL, TORQUE AND FORCE TEST (INCLUDES PROVISIONS FOR ANGULAR MEASUREMENT) | 5 | |
| C27078-1 | ADAPTER, MEASUREMENT, STAB SYSTEM TEST | 11 | |
| C28001-1 | ADAPTER, SUMP DRAIN | 6 | |
| C32013-1 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 16 | |
| C32013-15 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 6 | |
| C32013-16 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 4 | |
| C32013-9 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| C32020-15 | ADAPTER, EXTENSION BAR - FUNCTIONAL TEST, NLG STEERING (ADAPTS J32052 FOR USE ON 737-NG IN LIEU OF C32020-1) | 9 | |
| C32029-45 | ASSEMBLY - WRENCH ADAPTER, C32029-48 (INCLUDED IN C32029 KIT) | 17 | |
| C32029-49 | ASSEMBLY - WRENCH ADAPTER, | 6 | |
| C32029-52 | ASSEMBLY, WRENCH ADAPTER, C32029-55 (INCLUDED IN C32029 KIT) | 2 | |
| C32048-1 | ADAPTER, MLG | 13 | |
| C34006-53 | ADAPTER, TRAY - ELECTRONIC FLIGHT INSTRUMENTS SYSTEM (EFIS) SYMBOL GENERATOR SOFTWARE LOADING | 2 | |
| C34006-57 | ADAPTER, TRAY - ELECTRONIC FLIGHT INSTRUMENTS SYSTEM (EFIS) SYMBOL GENERATOR SOFTWARE LOADING | 7 | |
| C34006-57-E | ELECTRICAL ADAPTER, TRAY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C34006-58 | ELECTRICAL ADAPTER, TRAY | 1 | |
| C37099-103 | TOOL - ADAPTER, PRESSURE TEST VALVE, C37099-103 | 4 | |
| C49008-37 | EQUIPMENT - ADAPTER, APU JACKING | 11 | |
| C52007-1 | ADAPTER, TORQUE WREN | 10 | |
| C52008-1 | ADAPTER, DOOR,TORQUE | 19 | |
| C55001-7 | ADAPTER,ELEV HINGE FTG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C55001-8 | ADAPTER,ELEV HINGE FTG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C6035 | ADAPTER, RADIO | 1 | |
| C71014-1 | ADAPTER, WRENCH AFT CONE BOLT | 16 | |
| CA80100-0001 | ADAPTER, JACKING RAER FUSELAGE | 2 | |
| CA80100-0003 | ADAPTER,JACKING REAR FUSELAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CAT5643-12C | ADAPTER, TOOL-TORQUE WRENCH | 2 | |
| CAT5643-13C | ADAPTER, TOOL-TORQUE WRENCH | 3 | |
| CAT5643-7B | ADAPTER, TORQUE WRENCH | 1 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CDI250010031 | HEX ADAPTER,TORQUE WATCH 2"HEX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CG9000023-0001 | ADAPTER, FLUID SAMPLING KIT | 1 | |
| CHA700-224 | ADAPTER, BACKLASH CHECKING | 6 | |
| CM-389TR-17 | ADAPTER, CONNECTOR, SHELL SIZE 17 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CM-389TR-19 | ADAPTER, CONNECTOR, SHELL SIZE 19 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CM389TR-17A | ADAPTER, CONNECTOR, SHELL SIZE 17 | 1 | |
| CM389TR-17B | ADAPTER, CONNECTOR, SHELL SIZE 17 | 1 | |
| CM389TR-19A | ADAPTER, CONNECTOR, SHELL SIZE 19 | 1 | |
| CM389TR-19B | ADAPTER, CONNECTOR, SHELL SIZE 19 | 1 | |
| COM-13695 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COM-13696 | CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COM-13697 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| COM-13750 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CP1000-1500 | PLATE: ADAPTER, ELECTRICAL/MECHANICAL | 1 | |
| CP20128-5 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
| CP20128-6 | BAR - ADAPTER, RB211-524G/H ENGINE | 1 | |
| CS-295-AG129 | ADAPTER,SOCKET WRENCH | 1 | |
| CS-295-RC104 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| CS-295-RC124-A | ADAPTER, JACKING M.L.G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CS-295-RC162 | ADAPTER, SOCKET WRENCH | 1 | |
| CSO-00064-37 | ADAPTER, EXTERNAL HYDRAULIC POWER CONNECTION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CT22045 | ADAPTER,TEST-INTERFACE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| CT29699-1 | ADAPTER,CABLE-BDM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D11019-10 | ADAPTER,BULKHEAD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D14089-101 | ADAPTER, VACUUM | 4 | |
| D14105-101 | ADAPTER, VACUUM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| D19946-101 | ADAPTER, VACUUM | 2 | |
| D22625000 | ADAPTER, JACKING N.L.G. | 1 | |
| D22637000 | ADAPTER, JACKING MLG | 1 | |
| D22638000 | ADAPTER, EMERGENCY TOWING | 1 | |
| D7670A | ADAPTER, OIL DRAIN CSD | 3 | |
| DAPT61-0014-00 | ADAPTER, TORQUE | 1 | |
| DAPT61-0015-00 | ADAPTER, TORQUE | 8 | |
| DAPT65-0093-00 | ADAPTER, PRESS PUMP | 7 | |
| DAPT70-0003 | ADAPTER, HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DAPT70-0005 | ADAPTER, HOISTING | 1 | |
| DCM1608-1 | ADAPTER, INSTL/RMVL-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DCM1608-1 | ADAPTER,INSTL/RMVL-NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DCM1630-1 | Adapter,Instl/Rmvl-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DCM1630-1 | ADAPTER,INSTL/RMVL-MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DPI611-05G | ADAPTER, GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DRT68937 | ADAPTER, CHARGING MLG | 3 | |
| DRT68973 | ADAPTER, CHARGING - MLG | 12 | |
| DRT68973 | ADAPTER, CHARGING - MLG | 12 | |
| DSR2039-2 | ADAPTER, TORQUE SPANNER | 1 | |
| DZZ7029-1(V) | ADAPTER,HOISTING STRAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7154-1 | ADAPTER, MLG AXLE NUT TORQUE | 7 | |
| DZZ7197-13 | Adapter,Tube | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7313-1 | ADAPTER, HOSE REEL DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| DZZ7320-1 | Adapter，jacking-wing tip | 2 | |
| DZZ7382-1 | ADAPTER, CLEARVIEW WINDOW CAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E2-14-1 | ADAPTER, THREADED | 3 | |
| E53835 | Torque Adapter, Pressure Differential | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| E53835, E53837 | Torque Adapter, Pressure Differential Sensor | 1 | |
| EAA0360L00A | ADAPTER, HAR-1 POWER SPORTS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L20A | ADAPTER, BM-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L21A | ADAPTER, DLC-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L22A | ADAPTER, HAR-2 | 1 | |
| EAK0347L23A | ADAPTER, POL-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L24A | ADAPTER, DUC-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L25A | ADAPTER, SUZ-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L26A | ADAPTER,HON-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L27A | ADAPTER, KAW-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L28A | ADAPTER, KAW-2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L29A | ADAPTER, KAW-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAK0347L30A | ADAPTER, YAM-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EAX0068L27A | OBDI CABLE ADAPTER, DA-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EC1060 | KIT: ADAPTER,HOURMETER, USE K5147=8G | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EELD600HD-1B | TURBO ADAPTER, 50, 55 60MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EELD600HD-1C | TURBO ADAPTER, 65, 70 75MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EELD600HD-1D | TURBO ADAPTER, 80, 85, 90MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EELD600HD-1E | TURBO ADAPTER, 95, 100 105MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EMB-00196-001 | ADAPTER, PITOT, ANEMOMETRIC BENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EMB-00453-006 | ADAPTER, OXYGEN SUPPLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EMB-01411-005 | ADAPTER, CABIN PRESSURIZATION TEST | 2 | |
| ES125111-3 | ADAPTER, FUEL QNTY TEST SET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| EX250-B/G | ADAPTER, 1/4" HEX TO 1/4" SQUARE DRIVE | 1 | |
| F28313000 | ADAPTER, AIRCRAFT JACKING POINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F65-0-3311 | ADAPTER, NOSE WHEEL STEERING METERING VALVE | 2 | |
| F70009-1 | ADAPTER, AIRCRAFT JACKING | 1 | |
| F70190-1 | STAB TRIM SPLINE ADAPT. ADAPTER, SPLINE 20/40 | 1 | |
| F70312-46 | WRENCH - ADAPTER, CROWFOOT, 4.515-4.525 | 8 | |
| F70328-1 | ADAPTER, GROUND HAND | 11 | |
| F70333-24 | ADAPTER, CONSTANT SPEED DRIVE AND AC GENERATOR WIT | 11 | |
| F71300 | ADAPTER, MECHANICAL TEST | 1 | |
| F72823-40 | ADAPTER,STATIC TEST PORT | 18 | |
| F72867-1 | ASSEMBLY - ADAPTER, | 23 | |
| F72998-1 | ADAPTER, CABLE | 1 | |
| F80000-7 | JACK ADAPTER, FWD FUSELAGE | 23 | |
| F80026-1 | ADAPTER, ELEVATOR HOISTING | 8 | |
| F80176 | ADAPTER, TORQUE WRENCH- MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| F80176-8 | TORQUE WRENCH ADAPTER, MLG | 13 | |
| F80212-30 | ADAPTER, FORCE CHECK, RUDDER PEDAL | 18 | |
| FAL5P592N | ADAPTER, AIRCRAFT JACKING POINT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FBPT-P3-1100 | ADAPTER, LG RG PROBE | 1 | |
| FD0001D23654000 | ADAPTER, JACKING N.L.G. | 1 | |
| FD0001D236540000 | ADAPTER, JACKING NLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FD0001D23664000 | ADAPTER, JACKING M.L.G. | 1 | |
| FD0001D236640000 | ADAPTER, JACKING MLG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FDOO01D23654000 | Adapter, Jacking N.L.G. | 1 | |
| FDOO01D23664000 | ADAPTER, JACKING MLG | 1 | |
| FDOO03D23664000 | Adapter, Emergency Towing | 1 | |
| FDS40-0201 | CABLE - ADAPTER, HHMPI (L-3 COMM F1000 DFDR ONLY) | 6 | |
| FDS40-0202 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) (S-31-031-01-02) | 7 | |
| FDS40-0203 | CABLE - ADAPTER, HHMPI (HONEYWELL SSDFDR ONLY) | 6 | |
| FDS40-0215 | RACK ADAPTER, HONEYWELL CVR | 3 | |
| FDS40-0232 | COM-13696 CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
| FDS40-0247 | RACK ADAPTER, ARINC-757 CVR | 3 | |
| FDS40-0274 | CABLE - ADAPTER, HHMPI (FOR HONEYWELL MODEL HFR5-V SSCVR) | 2 | |
| FDS400-201 | COM-13750 Cable - Adapter, HHMPI (L-3 Comm F1000 DFDR only) | 6 | |
| FDS400-202 | CABLE - ADAPTER, HHMPI (L-3 COMM FA2100 DFDR ONLY) | 7 | |
| FDS400-203 | COM-13695 Cable - Adapter, HHMPI (Honeywell SSDFDR only) | 6 | |
| FDS400-232 | COM-13696 CABLE - ADAPTER, HHMPI (HONEYWELL HFR5-D ONLY) | 5 | |
| FL6007-WS5-01 GB | RADIO ADAPTER, HI-VIS GREEN | 3 | |
| FR216D0100-1 | ADAPTER,FUEL TANK TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| FRDH101 | ADAPTER, TORQUE WRENCH (PIN FRDH101) | 3 | |
| FRDH121 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/8" | 2 | |
| FRDH141 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 7/16" | 12 | |
| FRDH161 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 1/2" | 2 | |
| FRDH181 | TORQUE ADAPTER, 3/8" DRIVE, 12-POINT, 9/16" | 3 | |
| FRDH201 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 5/8" | 1 | |
| FRDH241 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 3/4" | 1 | |
| FRDH301 | ADAPTER, TORQUE, 3/8" DRIVE, 2" LENGTH, 15/16" | 1 | |
| G-4376K | Torque Adapter, Inlet Fitting | 1 | |
| G-4376L | Torque Adapter, Rod End Nut | 1 | |
| G-9826 | Torque Adapter, Sleeve Cover | 1 | |
| G0000010003 | JACK ADAPTER, AIRCRAFT LIFTING (FR. 29) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G1005211034-001 | ADAPTER, PAX DOOR EXTERNAL HANDLE | 4 | |
| G1005211034-001 | ADAPTER, PAX DOOR EXTERNAL HAND | 4 | |
| G1005211041-011 | ADAPTER, PAX DOOR, INTERNAL HAN | 3 | |
| G1005211041-011 | ADAPTER, PAX DOOR, INTERNAL HAN | 3 | |
| G1019-SA11 | ADAPTER, JACKING ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G26005-17 | ADAPTER, HOT WIRE ANEMOMETER | 4 | |
| G26005-24 | ADAPTER, HOT WIRE ANEMOMETER | 10 | |
| G27030-1 | ADAPTER, TORQUE | 8 | |
| G27091-1 | SPLINE ADAPTER, ANGLE GRARBOX DRIVE | 5 | |
| G28005 | ADAPTER, MECHANICAL TEST | 1 | |
| G28005-35 | ADAPTER, MECHANICAL TEST | 16 | |
| G28012-3 | ADAPTER,AIR SUPPLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G28014-15 | ADAPTER, FUEL SU | 2 | |
| G32021-19 | Adapter,Gauge | 1 | |
| G32033-2 | ADAPTER,INNER CYLINDER ASSY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G34002-7 | Adapter，base | 1 | |
| G600-120001 1 | ADAPTER, NITROGEN CHARGING | 5 | |
| G600-120001-1 | ADAPTER, NITROGEN CHARGING | 5 | |
| G600-120001−1 | ADAPTER, NITROGEN CHARGING | 5 | |
| G600-270052-1 | ADAPTER, TORQUE CHECK | 5 | |
| G600-520001-1 | ADAPTER, CABIN DOOR TORQUE | 1 | |
| G601R071001−1 | ADAPTER, JACK | 10 | |
| G601R121611-1 | ADAPTER, NITROGEN CHARGING | 5 | |
| G601R321102-1 | ADAPTER, MLG PINTLE PIN NUT | 6 | |
| G601R321102−1 | ADAPTER, MLG PINTLE PIN NUT | 6 | |
| G601R340002-9 | ADAPTER, TL11 | 1 | |
| G601R381001-1 | ADAPTER, PORTBLE WATER | 4 | |
| G601R521104-1 | ADAPTER, CABIN DOOR TORQUE | 7 | |
| G601R522201-1 | TORQUE ADAPTER, PILOT'S HATCH HANDLE | 4 | |
| G601R522202-1 | TORQUE ADAPTER, PILOT'S HATCH HANDLE | 6 | |
| G601R783003-1 | ADAPTER,BLEED AIR THRUST REVERSE | 1 | |
| G604-281203-1 | KIT, DRAIN ADAPTER, FUEL SHROUD | 3 | |
| G670-281102-1 | ADAPTER, FUEL TANK VENTING | 3 | |
| G670071000-1 | ADAPTER, JACK PAD ASSEMBLY | 5 | |
| G700-121205-1 | ADAPTER, NLG SERVICING 8 US GAL | 4 | |
| G700-121205-1 | ADAPTER, NLG SERVICING 8 US GAL | 4 | |
| G700-381101-1 | ADAPTER, POTABLE WATER | 3 | |
| G700-381101-1 | ADAPTER, POTABLE WATER | 3 | |
| G700-381201-1 | ADAPTER, DRAIN MAST POTABLE WATER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| G71001-125 | Adapter,Torque | 4 | |
| G76002-15U | PROTRACTOR ADAPTER, UPGRADED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GA-2 | ADAPTER, GAGE | 2 | |
| GA-3 | ADAPTER, GAGE | 3 | |
| GFAT1E | ADAPTER, 3/8" INTERNAL DRIVE X 1/4" EXTERNAL DRIVE | 4 | |
| GLA124A | ADAPTER, 1" TO 3/4" | 5 | |
| GLA12B | ADAPTER, 1/2" INTERNAL DRIVE X 3/4" EXTERNAL DRIVE | 5 | |
| GLA62 | ADAPTER,SOCKET WRINCH 3/4" TO 1/2", 3/4" TO 1" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GLA72A | ADAPTER, 3/4" TO 1" | 4 | |
| GLAS1E | ADAPTER, 3/4" INERNAL DRIVE X 1/2" EXTERNAL DRIVE | 4 | |
| GS12764-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS13215-1 | ADAPTER, TORQUE | 2 | |
| GS13283-1 | ADAPTER, TORQUE | 1 | |
| GS13302-1 | ADAPTER, SPLINED | 1 | |
| GS13419-1 | ADAPTER, TORQUE | 1 | |
| GS13561-1 | ADAPTER, TORQUE | 1 | |
| GS14501-1 | ADAPTER, HEAT EX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS14722-1 | ADAPTER, LEAKAGE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS14749-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS14788-1 | ADAPTER, SOCKET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS15052-1 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15453-1 | ADAPTER, SPRING SEAT | 1 | |
| GS15530-1 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15530-2 | ADAPTER, TORQUE WRENCH | 1 | |
| GS15549-2 | ADAPTER, TORQUE WRENCH | 1 | |
| GS16268-1 | TORQUE ADAPTER, PISTON & INSERT | 1 | |
| GS16268-2 | TORQUE ADAPTER, PISTON & INSERT | 1 | |
| GS18299-1 | ADAPTER, BALANCE KIT | 2 | |
| GS19518-1 | ADAPTER, HYDRAULIC TEST-C-130 | 1 | |
| GS19710-1 | ADAPTER, TORQUE | 1 | |
| GS19738-1 | ADAPTER, TORQUE | 2 | |
| GS19818-1 | ADAPTER,TORQUE | 5 | |
| GS19819-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS19820-1 | ADAPTER, PITCHIOCK NUT TORQUE | 2 | |
| GS19822-1 | ADAPTER, BETA NUT TORQUE | 2 | |
| GS19843-1 | ADAPTER, TORQUE | 1 | |
| GS19847-1 | ADAPTER, TORQUE | 1 | |
| GS19848-1 | ADAPTER, TORQUE | 1 | |
| GS19968-1 | ADAPTER, SCREW DRIVER | 1 | |
| GS19969-1 | ADAPTER, SCREW DRIVER | 1 | |
| GS20181-1 | ADAPTER, TORQUE | 1 | |
| GS20227-1 | ADAPTER, TORQUE PC FLAPPER | 1 | |
| GS20257-1 | TORQUE ADAPTER, PRV | 1 | |
| GS20338-1 | ADAPTER, TORQUE | 1 | |
| GS20398-1 | ADAPTER, DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS20713-1 | ADAPTER, TORQUE | 1 | |
| GS20782-1 | ADAPTER,TORQUE | 10 | |
| GS20852-1 | ADAPTER, TORQUE | 2 | |
| GS20865-1 | ADAPTER, MOUNT | 1 | |
| GS20867-1 | ADAPTER, MOUNT | 1 | |
| GS20877-1 | ADAPTER, PROP FLANGE | 2 | |
| GS20920-1 | TORQUE ADAPTER, MPSOV CAP | 2 | |
| GS20931-1 | ADAPTER, TORQUE 2 WAY SOLENOID | 2 | |
| GS21024-1 | ADAPTER, CONTROL DRIVE | 1 | |
| GS21252-1 | ADAPTER, TORQUE, FEATHER VALVE | 1 | |
| GS21281-1 | TORQUE ADAPTER, STEP MOTOR CAP | 1 | |
| GS21290-1 | ADAPTER, FLAPPER SETTING | 2 | |
| GS21441-1 | ADAPTER, POWER ARM | 1 | |
| GS21445-1 | ADAPTER, TORQUE | 1 | |
| GS21476-1 | ADAPTER, OUTLET | 1 | |
| GS21480-1 | ADAPTER, OUTLET | 1 | |
| GS21565-1 | ADAPTER, POWER ARM | 1 | |
| GS21573-1 | ADAPTER, INLET | 1 | |
| GS21596-1 | ADAPTER, TORQUE | 1 | |
| GS21609-1 | ADAPTER, TORQUE | 1 | |
| GS21612-1 | ADAPTER, AUG MENTER | 1 | |
| GS21743-1 | ADAPTER, INLET | 1 | |
| GS21759-1 | ADAPTER, TORQUE, SOLENOID | 1 | |
| GS21763-1 | ADAPTER, POWER AR | 1 | |
| GS21938-1 | ADAPTER, POWER ARM | 1 | |
| GS22057-1 | ADAPTER, TORQUE | 1 | |
| GS22287-1 | ADAPTER, TORQUE | 2 | |
| GS22526-1 | ADAPTER, TORQUE | 2 | |
| GS23016-1 | ADAPTER, PROPELLER TRANSP | 4 | |
| GS23016-I | ADAPTER, PROPELLER TRANSPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS23096-1 | ADAPTER, POWER ARM | 1 | |
| GS23424-1 | ADAPTER, PROPELLER FLANGE | 3 | |
| GS23437-1 | ADAPTER, PROPELLER, LIFTING | 14 | |
| GS23438-1 | ADAPTER, PROPELLER TRANSPORT | 13 | |
| GS24135-1 | ADAPTER, TIMING TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GS24323-1 | TORQUE ADAPTER, BLADE RING | 1 | |
| GS26802-1 | TORQUE ADAPTER, BALANCE NUT | 2 | |
| GSAF1E | ADAPTER, HARDENED, 1/2" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 5 | |
| GSAF1F | ADAPTER, STEP DOWN 1/2" DRIVE TO 3/8" DRIVE | 4 | |
| GSB0700007 | PAD: ADAPTER,LEVELIN | 5 | |
| GSB0800003 | ADAPTER, HUB CAP MAIN | 4 | |
| GSE 064 | ADAPTER,DRIVE FLAP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE101 | ADAPTER,APU TRANSPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE159 | TOOL - SLING ADAPTER, LEADING EDGE, VERTICAL STABILIZER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GSE262 | ADAPTER, FWD ENGINE LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| GTA3 | 15/16" SQUARE DRIVE ADAPTER, 1/4" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 2 | |
| H-2482 | ADAPTER, TIRE THREAD | 4 | |
| H0043 | ADAPTER, TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| H01-679 | Adapter, Fuel Outlet | 1 | |
| H01-741 | Adapter, Fuel Inlet | 1 | |
| H01-742 | Adapter, Oil Inlet | 1 | |
| H01-743 | Adapter, oil Outlet | 1 | |
| H01-745 | Adapter, Inlet | 1 | |
| H01-746 | Adapter, Outlet | 1 | |
| H1023-1 | PAD: ADAPTER,JACK,NEOPRENE, | 1 | |
| H46831 | ADAPTER, NLG WHEEL N | 11 | |
| HA-23005426 | GUIDE Ã?? SPUR ADAPTER, GEAR SHAFT | 1 | |
| HC-2522 | ADAPTER, FLANGE | 1 | |
| HC130H0029-000 | ADAPTER, HOOK SPANNER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HC130H0039-000 | ADAPTER, HOOK SPANNER | 1 | |
| HJ532-01 | PAD: ADAPTER,JACK, | 1 | |
| HJ532-02 | PAD: SM,ADAPTER,JACK | 2 | |
| HJ557 | PAD: ADAPTER,JACK, | 4 | |
| HNDT 5A180 | INSTRUMENT ADAPTER, 6 PIN JAEGER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HP-6000-35 | LIFT ADAPTER, 259/300 FOR | 1 | |
| HP-6000-45 | LIFT ADAPTER, EC130 | 1 | |
| HP-6000-51 | LIFT ADAPTER, 110 SERIES, R44 | 1 | |
| HS4508-4C4 | ADAPTER, FLARELESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HS4508-4N4 | ADAPTER, FLARELESS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HS8060 | ADAPTER, HYDRAULIC TEST | 2 | |
| HS9232 | ADAPTER, MOUNTING ACTUATOR | 1 | |
| HS9453-600 | ADAPTER,PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HS9951 | ADAPTER, DOME LIFTING | 1 | |
| HS9991-6 | ADAPTER, FLARE TO FLARELESS | 1 | |
| HSP1474 | ADAPTER, CONE SE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU28499 | ADAPTER, EXTRACT HPT NGV BORESCOPE BLANK - 0.4375-20UNF | 3 | |
| HU35451 | "ADAPTER, NOSE SPINNER REMOVAL | 9 | |
| HU41791 | ADAPTER, CONNECTOR - INHIBITING FUEL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU44807 | Adapter,lifting sling | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU50307-1 | EXTRACTOR - ADAPTER, VSV ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU51166 | ADAPTER, EXTRACTOR - BORESCOPE PLUGS HP | 5 | |
| HU55007-1 | UPS ADAPTER, ENGINE MOUNT BRACKET | 3 | |
| HU55178 | ADAPTER, REM.-INST. PNEUMATIC STARTER | 1 | |
| HU55368-3 | ADAPTER, STAND, ENGINE REMOTE OUTSTATION | 2 | |
| HU56209 | ADAPTER,FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU56209-1 | ADAPTER, FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU56209-2 | ADAPTER, FUEL PUMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| HU56522 | ADAPTER, LIFTING - FAN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IA3202 | ADAPTER, BRAKE INSTALLATION AND REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1F10023 | Adapter，handling-gearbox | 8 | |
| IAE1F10039 | ADAPTER, ANTI LHT Dwg No.(537250008) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1F10041 | ADAPTER, LIFTING | 8 | |
| IAE1F10042 | ADAPTER, LIFTING | 4 | |
| IAE1F10178 | ADAPTER, STORAGE | 2 | |
| IAE1F10208 | ADAPTER, LIFTING | 2 | |
| IAE1J12007 | ADAPTER, SLING | 9 | |
| IAE1J12015 | ADAPTER, EXPANDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12027 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12104 | ADAPTER, SLING LHT Dwg No.(537220012) | 6 | |
| IAE1J12108 | ADAPTER, SLING LHT Dwg No.(537220020) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12303 | ADAPTER, HANDLING LHT Dwg No.(537220024) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12317 | ADAPTER, TURN OVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12376 | ADAPTER, OIL FEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12394 | ADAPTER, BALANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12450 | ADAPTER, OIL FEED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12500-1A | ADAPTER, PUSHER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1J12519 | ADAPTER, REMOVAL | 1 | |
| IAE1J12535 | ADAPTER, BALANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1M14019 | ADAPTER, MOUNTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1M14053 | ADAPTER, WRENCH TORQUE LHT Dwg No.(537250101) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1M14054 | ADAPTER, WRENCH TORQUE LHT Dwg No.(537250102) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1N20402 | ADAPTER, LEAK TEST | 10 | |
| IAE1P16015 | ADAPTER, MOMENT WEIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16016 | ADAPTER, MOMENT WEIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16042 | ADAPTER, LEAK TEST | 13 | |
| IAE1P16047 | ADAPTER, HYDRAULIC | 3 | |
| IAE1P16047B | ADAPTER, HYDRAULIC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16051 | ADAPTER, CLAMP | 2 | |
| IAE1P16065 | ADAPTER, ORIENTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16086 | ADAPTER, AIR FLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16087 | ADAPTER, AIR FLOW LHT Dwg No.(537200054) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16088 | ADAPTER, LEAK CHECK LHT Dwg No.(537240002) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16205 | ADAPTER, AIR | 6 | |
| IAE1P16272 | ADAPTER, HYDRAULIC LHT Dwg No.(537250044) | 2 | |
| IAE1P16285 | ADAPTER, TIEROD LHT DWG NO.(537250070) | 3 | |
| IAE1P16341 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16354 | ADAPTER, VACUUM TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P16486 | ADAPTER,ANTI TORQUE | 3 | |
| IAE1P16549 | ADAPTER, ORIENTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P17023 | ADAPTER, TORQUE | 1 | |
| IAE1P17025 | ADAPTER, INSTALL/REMOVE LHT Dwg No.(537250053) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P17521 | ADAPTER, AIRFLOWLHT Dwg No.(537200035) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1P17568 | Adapter, Torque | 1 | |
| IAE1P17575 | Adapter, Torque | 1 | |
| IAE1P17576 | ADAPTER, TORQUE | 1 | |
| IAE1P17771 | ADAPTER, ORIENTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1R18003 | ADAPTER, LEAK TEST | 22 | |
| IAE1R18441 | ADAPTER, LIFTING LHT Dwg No.(537230114) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE1R18911 | ADAPTER, DRILL LHT Dwg No.(537230206) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2F10065 | ADAPTER, AIRFLOW CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2F10148 | ADAPTER, CLAMPING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2F10397 | ADAPTER, LEAK TEST OIL SCAV TUBES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2F10400 | ADAPTER, LEAK TEST OIL SCAV TUBES | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2F10416 | ADAPTER, AIRFLOW (OUTLET) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2P16243 | ADAPTER, PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2P16245 | ADAPTER, PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE2P16367 | ADAPTER, PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE3J12735 | ADAPTER, BALANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE3P16276 | ADAPTER, REMOVAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE4P16228 | ADAPTER, HOSE | 5 | |
| IAE4P17608 | ADAPTER, COVER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE5F10048 | ADAPTER, SHIP/HANDLING AGB LIFT TOOL V2500 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE9F10050 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE9F10053 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| IAE9F10064 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J20009-50 | ADAPTER, LOAD POSITIONER | 12 | |
| J20009-68 | CRADLE ADAPTER, JACKING EQUIPMENT - HYDRAULIC TELESCOPING | 14 | |
| J24001-43 | Hoist Adapter, VSCF | 6 | |
| J24001-50 | Hoist Adapter, VSCF | 10 | |
| J27015-1 | SPLINE ADAPTER,FLAP PDU | 7 | |
| J47549 | ADAPTER, AXLE NUT | 40 | |
| J51005 | INSTL/REMOVAL ADAPTER,FUSELAGE DRAIN VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| J51005-1 | INSTALLATION / REMOVAL ADAPTER, FUSELAGE DRAIN | 4 | |
| J51005-2 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 2 | |
| J51005-7 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 9 | |
| J5853 | DRIVE ADAPTER, SIZE: 3/4'F X 1'M, MAKE: PROTO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| JGSA | Ionic Straight Adapter, 1/2 in | 1 | |
| K-1057 | KIT: ADAPTER,COMPRESSOR WASH, TPE331 | 6 | |
| K-1152 | KIT: ADAPTER,PT6, | 6 | |
| K-1243 | ADAPTER, ENG COMPRESSOR WASH | 5 | |
| K-1357 | KIT: WASHER,ADAPTER, | 4 | |
| K-1381 | KIT: ADAPTER,CABIN PRESSURE, PIPER PA31T,AEROSTAR,OTHER | 3 | |
| K-1623 | KIT: ADAPTER,CABIN PRESSURE, AERO COMMANDER | 2 | |
| K-2112 | KIT: ADAPTER,ENGINE STAND, | 5 | |
| K-2115 | KIT: ENGINE STAND ADAPTER, | 6 | |
| K-2478 | KIT: ADAPTER, | 2 | |
| K-2714 | KIT: WASHER ADAPTER, DASH 8 -100,-300: AU/NZ | 4 | |
| K-2733-02 | ADAPTER, FIXTURE, NLG INSTALLATION | 3 | |
| K-2734-02 | ADAPTER, MLG INSTALLATION FIXTURE | 5 | |
| K-3025 | ADAPTER, ANTISKID TESTER | 8 | |
| K-3861 | KIT: ADAPTER,TFE-731-60, | 1 | |
| K-4055 | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | 2 | |
| K-4056 | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | 2 | |
| K-4057 | ADAPTER, NLG BRACE | 1 | |
| K-4123 | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | 1 | |
| K-4191 | NOSE ADAPTER, | 2 | |
| K-5036 | ADAPTER, PRECOOLER | 2 | |
| K-5062 | ADAPTER, FWD BATTERY LIFT | 2 | |
| K07003-1 | JACK ADAPTER, NOSE, B787 | 2 | |
| K07003-15 | JACK ADAPTER, NOSE, B787 | 6 | |
| K1037 | KIT: HOSE ADAPTER,COMPRESSOR WASH, | 3 | |
| K1057 | KIT: ADAPTER,COMPRESSOR WASH, TPE331 | 6 | |
| K1152 | KIT: ADAPTER,PT6, | 6 | |
| K1243 | KIT: ADAPTER,COMPRESSOR WASH, CARAVAN | 5 | |
| K1286 | KIT: ADAPTER,CABIN PRESSURE, LEAR 25/35 | 4 | |
| K1288 | KIT: ADAPTER,CABIN P | 3 | |
| K1359 | KIT: ADAPTER,CABIN PRESSURE, CESSNA 421,425,441,LE | 5 | |
| K1360 | KIT: ADAPTER,CABIN PRESSURE, LEAR55 S/N GRTR THAN125,EMB120 | 2 | |
| K1381 | KIT: ADAPTER,CABIN P | 3 | |
| K1570A | ADAPTER, TORQUE WRENCH | 1 | |
| K1571 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K1571A | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K1572 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K1573 | ADAPTER, TORQUE | 1 | |
| K1622 | KIT: ADAPTER,CABIN PRESSURE, FALCON 10,20,50,50EX,900,900EX | 2 | |
| K1623 | KIT: ADAPTER,CABIN PRESSURE, AERO COMMANDER | 2 | |
| K1638 | KIT: ADAPTER, | 1 | |
| K21008-1 | JACK ADAPTER, AIR CYCLE MACHINE | 8 | |
| K2110 | KIT: ENGINE STAND ADAPTER, | 3 | |
| K2112 | KIT: ADAPTER,ENGINE STAND, | 5 | |
| K2113 | KIT: ENGINE STAND ADAPTER, | 1 | |
| K2115 | KIT: ENGINE STAND ADAPTER, | 6 | |
| K2117 | KIT: ENGINE STAND ADAPTER, | 3 | |
| K2179 | KIT: ADAPTER,AXLE JACK, | 1 | |
| K2288 | KIT: ADAPTER,LEAR 60, | 4 | |
| K2478 | KIT: ADAPTER, | 2 | |
| K2601 | KIT: ADAPTER,CABIN PRESSURE, CESSNA CITATION I,II,V,S/II | 4 | |
| K2685 | KIT: ADAPTER,ENGINE STAND, | 4 | |
| K27068-10 | ADAPTER, B787 ENCODER CALIBRATION | 5 | |
| K2714 | KIT: WASHER ADAPTER, DASH 8 -100,-300: AU/NZ | 4 | |
| K2734-02 | ADAPTER, MLG FIXTURE | 5 | |
| K2769 | KIT: ADAPTER,ENGINE STAND | 4 | |
| K2770 | KIT: ADAPTER,ENGINE STAND, | 4 | |
| K2799 | PAD: ADAPTER,JACK, | 4 | |
| K2808 | KIT: ADAPTER,ENGINE STAND, | 3 | |
| K2998 | KIT: MLG ARM ADAPTER, | 1 | |
| K3025 | KIT: BRAKE ADAPTER, | 8 | |
| K3314 | PAD: ADAPTER,JACK, | 3 | |
| K3579 | PAD: ADAPTER,JACK, | 2 | |
| K3618 | KIT: ADAPTER,ENGINE,PW308A, | 5 | |
| K3901 | ADAPTER, HEAT EXC FLU | 5 | |
| K3979 | KIT: ADAPTER,EWC | 3 | |
| K4055 | KIT: ADAPTER,TOWBAR, FALCON 50,900,2000 | 2 | |
| K4055SP | KIT: ADD-ON,ADAPTER,TUG,GRY, FALCON 50/900/2000 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K4056SP | KIT: ADD-ON,ADAPTER,TUG,GRY, LEAR 40/45 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K4123 | KIT: ADAPTER,ASSEMBLY, FALCON X JP | 1 | |
| K4123SP | KIT: ADD-ON,ADAPTER,TUG,FALCON 7X,GRY, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| K4126 | KIT: ADAPTER,AXLE,ASSEMBLY | 2 | |
| K4130 | KIT: ADAPTER,AXLE,3.84IN DIA, | 1 | |
| K4177 | KIT, SABRELINER JP ADAPTER, | 1 | |
| K4296 | KIT: ADAPTER, FALCON 7X | 1 | |
| K5147 | KIT: ADAPTER,HOURMETER, | 1 | |
| K54001-100 | HOIST ADAPTER, B787 AFT STRUT FAIRING | 7 | |
| K71012-1 | ADAPTER, HAND PUMP | 6 | |
| KA-91-07 | ADAPTER, TNC FEMALE TO N MALE | 4 | |
| KC46 BORESCOPE KIT | EACH KIT SHALL CONSISTS OF THE FOLLOWING: 1. ONE (1) 3D VIDEOSCOPE BASE UNIT WITH BATTERIES (2) & CHARGER (SHALL INCLUDE: CASE AND MOUNT KIT, SHOULDER STRAP, MEMORY CARD, CARD READER, SCOPE HOLDER, AC ADAPTER, & WARRANTY) 2. ONE (1) MEASUREMENT VIDEOSCOP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| KHC-1011 | KIT: ADAPTER,HYD COU | 7 | |
| KHC-1160 | KIT, ADAPTER, HYDRAULIC COUPLING | 6 | |
| KHC-2014 | KIT, ADAPTER, HYDRAU | 3 | |
| KHC-2173 | KIT: ADAPTER,HYD COU | 10 | |
| KHC-2258 | KIT: ADAPTER,HYD COU | 7 | |
| KHC-2424 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 7 | |
| KHC-3560 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC-3561 | KIT: ADAPTER,HYD COU | 3 | |
| KHC-3651 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC-3747 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 3 | |
| KHC-3754 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 8 | |
| KHC1004 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 5 | |
| KHC1005 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC1010 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1011M | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1020 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 1 | |
| KHC1038 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 2 | |
| KHC1042 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC1075 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 2 | |
| KHC1160 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 6 | |
| KHC1306 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 2 | |
| KHC1468 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC2173 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 10 | |
| KHC2199 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 4 | |
| KHC2424 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 7 | |
| KHC2738 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 1 | |
| KHC3558 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC3559 | KIT: ADAPTER,HYD COUPLING, PRESSURE RETURN | 2 | |
| KHC3560 | ADAPTER,HYD COUPLING, PRESSURE & RETURN | 4 | |
| KHC3747 | ADAPTER,HYD COUPLING, PRESSURE AND RETURN | 3 | |
| KHC3754 | KIT: ADAPTER,HYD COUPLING, PRESSURE | 8 | |
| KHC3779 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC4000 | KIT: ADAPTER,HYD COUPLING, PRESSURE & RETURN | 3 | |
| KHC4001 | KIT: ADAPTER,HYD COUPLING, PRESSURE RETURN | 2 | |
| KHC4005 | KIT: ADAPTER,COUPLING,HYD HOSE, SUKHOI SJ100 | 2 | |
| LBRA-7 | ADAPTER, SOCKET WRENCH | 2 | |
| LTCT 1390 | ADAPTER, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| LTCT 7341 | ADAPTER, ENGINE FRAME | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT1390 | Adapter, Compressor Rotor Assembly | 1 | |
| LTCT13984-01 | Adapter, Holding, Power Turbine Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT14617-01 | ADAPTER, LIFTING ASSEMBLY, COMBUSTOR TURBINE NOZZLE | 1 | |
| LTCT14815 | Adapter, Plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT23503 | Adapter, Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT25557-01 | Adapter, Bellmouth | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT25558-01 | Adapter, Bellmouth | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT30328-01 | Adapter, Puller Kit | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT4441 | Adapter, Holding Fixture | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT4558 | ADAPTER, LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT6518 | Adapter, Installation Tool | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT7285 | ADAPTER, MECHANICAL PULLER | 1 | |
| LTCT7309 | ADAPTER, PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| LTCT7341 | Adapter, Engine Frame | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| M46750 | ADAPTER, MLG WHL AXLE NUT | 19 | |
| M47151 | ADAPTER, R/I NLG DRAG STAY | 10 | |
| M65725379 | ADAPTER, ACM COMPRESSOR | 2 | |
| MA270002-1 | ADAPTER, LE SLAT AND TE FLAP, MANUAL DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU179622 | ADAPTER, ALTITUDE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU270520 | ADAPTER, EJECTION SEAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU56425-2 | ADAPTER, MOUNTING-DROGUE GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU57397 | ADAPTER, TEST-SEAT FIRING BREECH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU57399 | ADAPTER, TEST, MANUAL SEPARATION BREECH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU57829 | ADAPTER, TEST-HPRU PRESSURE INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU57843-2 | ADAPTER, TEST-BTRU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU57920 | ADAPTER, TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU61344 | ADAPTER, TEST-ROCKETS SYSTEM FLEXIBLE PIPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MC601 | ADAPTER, NOISE SOURCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ME65B83635 | TORQUE WRECH ADAPTER, BRAKES, MAIN DECK CARGO DOOR | 12 | |
| MIT65B80985-9 | ADAPTER,THRUST LEVER RIG | 8 | |
| MIT65B81875 | SCREWDRIVER - ADAPTER, RUDDER, ELEVATOR FEEL ACTUATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MIT69B82662-17 | SET - SOCKET ADAPTER, SPOILER ACTUATOR BOLT, USED ON INBD SPOILERS 5 THRU 8 | 1 | |
| MME-PD459 | ADAPTER, INFLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MODEL 80I-600 | AMP-CLAMP ADAPTER, AC CURRENT - | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MPS43-K1 | KIT,ADAPTER,PITOT STATIC | 1 | |
| MQ4-120 | RADAR COOLING INLET PLUG (MQ4-AARSS) ADAPTER, JACK PAD, NSN: 1560-01-659-4947 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS21900D8 | ADAPTER, FLOOR RUN TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS21900J4 | ADAPTER, FLARELESS TUBO TO FLARED TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS21900J6 | ADAPTER, FLARELESS TUBO TO FLARED TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS21902D10 | ADAPTER, HOSE TO ENCLOSURE(AS21902D10, SAE: SOCIETY OF AUTOMOTIVE ENGINEERS, AEROSPACE STANDARD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 1 | |
| MS24522-17 | ADAPTER, STRAIGHT LO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MS24587-8 | STEEL ADAPTER, STRAIGHT, TUBE TO HOSE | 4 | |
| MS27404-3D | ADAPTER, SPLINE CAVITY | 2 | |
| MS51525A4S | ADAPTER,PIPE TO TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MT548-1 | ENGINE HOIST ADAPTER, ASSEMBLY | 1 | |
| MV062-2070 | ADAPTER, FEM 2004 F350 DIESEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV062-2071 | ADAPTER, MALE 2004 F350 DIESEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622063 | ADAPTER, MALE "S" SERIES VOLVO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622064 | ADAPTER,FEMALE"S" SERIES VOLVO | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622069 | ADAPTER, MALE TRANSTEC | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622073 | ADAPTER, MERCEDES BENZ MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622074 | ADAPTER, MERCEDES BENZ FEMALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622075 | ADAPTER, JAGUAR MALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0622076 | ADAPTER, JAGUAR FEMALE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MV0624400 | ADAPTER, FORD QK DISCNECT 1/2 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MultiRAE PGM-6228 | multigas monitor for PID 10.6eV lamp 0.1-5000ppm, LEL, & O2, non-wireless, Extended - duration Li-ion rechargeable battery with alkaline adapter," | 1 | |
| N16-2BNF-B | Bridge Adapter, Nortec 16 Lemo to Dual Female BNC's | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| N2965500 | ADAPTER, OPTICAL TIP, 80 DEGREE, OLYMPUS, AT80D/FF–IV86, 6 MM,35 TO MM, GREEN | 1 | |
| NSA855010GV08 | COUPLING ADAPTER, PRESSURE TEST, ACT | 2 | |
| O111288 | ADAPTER, BOOST PUMP CANNISTER | 2 | |
| O118233 | ADAPTER, LIFTING - OBIGGS | 1 | |
| O2N2FP0039 | CHARGE ADAPTER, O2, -4MJ | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| O2N2FP0165 | SCHRADER VALVE STEM ADAPTER, LARGE TO SMALL BORE | 1 | |
| P-75701-3 | ADAPTER, 3RD PITOT | 9 | |
| P15589M1-3 | PITOT TEST ADAPTER, GUL | 6 | |
| P22942M1-4 | Barfield P22942M1-4 Pitot Static Adapter, For Falcon Aircraft | 6 | |
| P2D-2BNF-B | Bridge Adapter, Phasec 2D/3D to Dual Female BNC's | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P4006409 | ADAPTER,GROUND HANDLING EQUIPMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| P40951M-3 | PITOT TEST ADAPTER, HAWKER HS-125 600-900 | 2 | |
| P62261M-3 | ADAPTER, RUDDER THROW LIMITER PITOT TUBE. | 5 | |
| P75701-3 | BARFIELD P75701-3 STATIC TEST ADAPTER, FOR BOEING, | 9 | |
| P75701-4 | Barfield P75701-4 Static Test Adapter, For Dornier and Airbus | 13 | |
| P75701-4C | ADAPTER, PITOT PROBE | 12 | |
| P75705-3 | ADAPTER, PITOT TEST | 3 | |
| P80128-4 | ADAPTER, AIRCRAFT TYPE F-70/100 | 4 | |
| P96255-3 | BARFIELD P96255-3 PITOT STATIC ADAPTER, FOR CESSNA SINGLE ENGINE AND CESSNA AIRCRAFT | 3 | |
| PA2A | Adapter, 3/8" F x ½" M | 2 | |
| PC-1006 | ADAPTER, OXYGEN CHARGING | 19 | |
| PC-1006 | ADAPTER,OXYGEN CHARGER | 19 | |
| PC-1009 | GSE 016 - ADAPTER,OXYGEN CHARGING | 5 | |
| PC-1009 | ADAPTER,OXYGEN CHARGING | 5 | |
| PC-1011 | HIGH PRESSURE N ADAPTER, TRONAIR | 7 | |
| PC-1067 | ADAPTER, STRUT SERVICE | 8 | |
| PC1009 | ADAPTER, OXYGEN CHARGING | 5 | |
| PC1011 | HIGH PRESSURE N ADAPTER, | 7 | |
| PS4-040 | VACUUM ADAPTER, SWIVELING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PS44129-4-6 | BARFIELD PS44129-4-6 PITOT TEST ADAPTER, FOR AGUSTA AIRCRAFT | 3 | |
| PS49742M3-4 | BARFIELD PS49742M3-4 PITOT ADAPTER, FOR PIPER AEROSTAR AND PIPER AZTEC AIRCRAFT | 3 | |
| PS49742M4-4 | BARFIELD PS49742M4-4 PITOT TEST ADAPTER, FOR AIRCR | 4 | |
| PS56620M2-4-4 | BARFIELD PS56620M2-4-4 PITOT STATIC ADAPTER, FOR PIPER ARROW AND PIPER SEMINOLE AIRCRAFT | 4 | |
| PSD 737-1 | CABLE, ADAPTER, B737 FQIS TESTER | 9 | |
| PSD40-502 | Adapter, B727/737/747 | 8 | |
| PSD40-502-3 | Adapter, Wings Tanks w/Digital GAGES | 8 | |
| PSD737-1 | CABLES-ADAPTER, FUEL QTY IND SYST (FQIS) TESTER | 9 | |
| PSDAF-105 | ADAPTER,TEST | 3 | |
| PSDAF-C130A | ADAPTER,TEST | 2 | |
| PSS55611M-4-6-6 | ADAPTER,PITOT | 2 | |
| PSS60615M1-4-6-6 | TEST ADAPTER,PITOT-DUAL STATIC | 2 | |
| PSS61587-3-4-4 | ADAPTER, DUAL PITOT STATIC | 2 | |
| PSS62148M-3-4-4 | PITOT TEST ADAPTER, CL600 | 1 | |
| PSS72698-3-4-4 | ADAPTER, TEST, PITOT STATIC, PRB | 5 | |
| PSS72698-3-4-4 | ADAPTER, TEST, PITOT STATIC, PR | 5 | |
| PSS88139-3-4-4 | BARFIELD PSS88139-3-4-4 PITOT STATIC ADAPTER, FOR | 3 | |
| PSS88340-3-4-4 | ADAPTER, ADA340-612 | 4 | |
| PWA 101618 | ADAPTER, HYDRAULIC PUMP | 2 | |
| PWA 102285 | ADAPTER, TORQUE | 1 | |
| PWA 102398 | ADAPTER, COUNTERTORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 102460 | ADAPTER, WRENCH* (USE WITH MECHANICAL AND HYDRAULIC WRENCH) | 1 | |
| PWA 102743 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 102744 | ADAPTER, HOLDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 103081 | ADAPTER, TORQUE | 1 | |
| PWA 103574 | ADAPTER, LIFT AND TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 211305 | ADAPTER, HANDLING | 1 | |
| PWA 211801 | ADAPTER, HOLDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 24524 | ADAPTER, HYDRAULIC PUMP | 8 | |
| PWA 29451 | ADAPTER, HYDRAULIC PUMP | 7 | |
| PWA 76154 | ADAPTER, LIFT AND TRUNNION (2 REQUIRED) | 5 | |
| PWA 77180 | ADAPTER, FLOW DIVIDER (LIQUID FUEL) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 80096 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
| PWA 80612 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 80842 | ADAPTER, REAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 80856 | ADAPTER, LOADING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 83327 | ADAPTER, PEDESTAL (3 REQUIRED) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85051 | ADAPTER, WRENCH* (USE WITH MECHANICAL WRENCH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85054 | ADAPTER, WRENCH* (USE WITH MECHANICAL AND HYDRAULIC WRENCH) | 1 | |
| PWA 85063 | ADAPTER, WRENCH | 1 | |
| PWA 85248 | ADAPTER, AIRFLOW TEST | 1 | |
| PWA 85264 | "ADAPTER, HOLDING* (USE WITH MECHANICAL AND HYDRAULIC WRENCH) | 1 | |
| PWA 85292 | ADAPTER, TORQUE (OPTIONAL TO PWA 86227) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85299 | "ADAPTER, WRENCH* (USE WITH MECHANICAL WRENCH) | 1 | |
| PWA 85301 | "ADAPTER, HOLDING (USE WITH MECHANICAL WRENCH) | 1 | |
| PWA 85302 | ADAPTER, TORQUE | 1 | |
| PWA 85366 | ADAPTER, HANDLING (OPTIONAL TO PWA 87316) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85367 | ADAPTER, HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85390 | ADAPTER, LIFTING | 1 | |
| PWA 85436 | ADAPTER, TORQUE | 1 | |
| PWA 85507 | ADAPTER, HOLDING (USE WITH HYDRAULIC WRENCH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85515 | ADAPTER, HOLDING* (USE WITH HYDRAULIC WRENCH) | 1 | |
| PWA 85517 | ADAPTER, HOLDING* (USE WITH HYDRAULIC WRENCH) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85579 | ADAPTER, LEAK TEST | 4 | |
| PWA 85700 | ADAPTER, KIT TEST | 1 | |
| PWA 85749 | ADAPTER, TORQUE−ELECTRICAL CONNECTOR | 2 | |
| PWA 85785 | ADAPTER, PILOTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85791 | ADAPTER, COUNTER-TORQUE | 1 | |
| PWA 85793 | ADAPTER, HANDLING | 1 | |
| PWA 85853 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 85862 | ADAPTER, TORQUE | 6 | |
| PWA 85928 | ADAPTER, TORQUE | 1 | |
| PWA 85983 | ADAPTER, STABILIZER (TWO NECESSARY TWIN OVERHEAD RAIL SYSTEM ONLY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 86115 | ADAPTER, ARBOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 86227 | ADAPTER, TORQUE | 1 | |
| PWA 86461 | ADAPTER, TORQUE | 7 | |
| PWA 86567 | ADAPTER, LIFT AND TRUNNION (2 NECESSARY) PWA 86598 RETAINER, POSITIONING (OPTIONAL TO PWA 86209) | 1 | |
| PWA 86603 | ADAPTER, HOLDING | 2 | |
| PWA 86621 | ADAPTER, REDUCER | 2 | |
| PWA 87006 | ADAPTER, WRENCH | 1 | |
| PWA 87316 | ADAPTER, HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 88603 | ADAPTER, LIFT AND TRUNNION | 1 | |
| PWA 95825 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 95832 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 95893 | ADAPTER, DEADLOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 98023 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA 98106 | ADAPTER, HYDRAULIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA-211825 | ADAPTER, REMOVER | 4 | |
| PWA102390 | ADAPTER, DRIVE -ENGINE TURNING, BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106305 | ADAPTER,TORQUE-EEC ALTERNATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106378 | ADAPTER,STARTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106415 | ADAPTER, LEAK TEST - OIL SYSTEM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106491 | ADAPTER,DRIVE-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA106492 | ADAPTER,OFFSET-BORESCOPE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA107602 | ADAPTER, TORQUE - ENGINE, AFT DRAIN MAST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA111018 | ADAPTER, LIFT | 2 | |
| PWA111085 | ADAPTER, VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA111555 | ADAPTER, LIFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA115399 | ADAPTER, LIFTING PLATE - IDG | 3 | |
| PWA115650 | ADAPTER, REMOVAL | 1 | |
| PWA12210 | Adapter, Flow Check | 7 | |
| PWA12386 | ADAPTER, FUEL DEPRESERVATION | 3 | |
| PWA12578 | ADAPTER, STATIC BALANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA12579 | ADAPTER, STATIC BALANCE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA15376 | TF33/JT3 VANE STAGE 1 - ADAPTER, LOCATOR (PRELIMINARY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA15559 | TF33/JT3 VANE STAGE 3 - ADAPTER, LOCATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA15564 | TF33/JT3 VANE STAGE 4 - ADAPTER, LOCATOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA15678 | TF33/JT3 VANE STAGE 2 - ADAPTER, LOCATOR (PRELIMINARY) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA20333 | ADAPTER, SPLINED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA211190 | ADAPTER, INSTALLATION | 3 | |
| PWA211284 | ADAPTER, STARTER INSTALLATION | 3 | |
| PWA211313 | ADAPTER, INSTALLATION | 1 | |
| PWA211314 | ADAPTER, INSTALLATION | 2 | |
| PWA211413 | ADAPTER, ANTI-TORQUE | 1 | |
| PWA211434 | ADAPTER, TORQUE | 3 | |
| PWA211435 | ADAPTER, TORQUE - PMA ROTOR | 4 | |
| PWA211624 | ADAPTER, TORQUE | 3 | |
| PWA211801 | ADAPTER, HOLDER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA211825 | ADAPTER, REMOVER, IGNITER | 4 | |
| PWA211901 | ADAPTER, PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA212262 | ADAPTER, REMOVER IGNITER INSERT | 2 | |
| PWA2388 | ADAPTER,HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA24524 | ADAPTER, HYDRAULIC PUMP | 8 | |
| PWA25026 | ADAPTER, WRENCH - TURBIN SHAFT NUT_DIA 191 X 311MM | 2 | |
| PWA25207 | ADAPTER, CONNECTING - AGB TO STAND_[PWA25207] | 1 | |
| PWA25278 | ADAPTER, CONNECTING - G/B TO STAND_[PWA25278] | 2 | |
| PWA25569 | ADAPTER, CONC. CHK - BRG, BAL REAR RACE_[PWA25569] | 1 | |
| PWA25570 | ADAPTER, CONC. CHK - BRG, BAL. OUTER RAC_[PWA25570] | 1 | |
| PWA25577 | ADAPTER, WEIGHT - HPC BAL BRG INR RACE_[PWA25577] | 2 | |
| PWA25578 | ADAPTER, WEIGHT - HPC, BAL BRG WT OUTR_[PWA25578] | 1 | |
| PWA25612 | ADAPTER,TORQUE WRENCH - LPC FLANGE_[PWA25612] | 1 | |
| PWA26147A | ADAPTER, LIFT & TRUNNION - HPC_[PWA26147A] | 1 | |
| PWA26204 | ADAPTER, REMOVAL - TEC NO.4 BRG REPLC_[PWA26204] | 2 | |
| PWA26206 | ADAPTER, PLATE - HPC FRT HUB CLAMP_[PWA26206] | 1 | |
| PWA26246 | ADAPTER,LOCATING - HPC CASE & STATORS_[PWA26246] | 1 | |
| PWA26359 | ADAPTER, INSP - NO.2 BRG INTERNAL_[PWA26359] | 1 | |
| PWA26486 | ADAPTER,LIFTING - TURB ROTOR 2ND STG_[PWA26486] | 2 | |
| PWA26487 | ADAPTER,LIFTING - TURB ROTOR 1ST STG_[PWA26487] | 1 | |
| PWA27264 | ADAPTER, INSP - #2 BRG SPACER MEASURET_[PWA27264] | 1 | |
| PWA27403 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27403] | 1 | |
| PWA27405 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27405] | 1 | |
| PWA27406 | ADAPTER, WEIGHT - FAN ROTOR BAL BRG WT_[PWA27406] | 1 | |
| PWA27407 | ADAPTER, BRG - LPC BAL ARBOR INN RACE_[PWA27407] | 1 | |
| PWA27408 | ADAPTER, INSP - LPC BAL ARBOR OUTR RACE_[PWA27408] | 1 | |
| PWA27466 | ADAPTER, RETAINING - LPT FRONT RETAINER_[PWA27466] | 2 | |
| PWA27618 | ADAPTER,CONNECTING - DIFF CASE_[PWA27618] | 1 | |
| PWA27625 | ADAPTER, LIFT & TRUNNION, ENG REAR_[PWA27625] | 2 | |
| PWA27704 | ADAPTER, BRG - REAR COMP REAR BAL FIX_[PWA27704] | 2 | |
| PWA27726A | ADAPTER, STATIC BAL - HPC 12TH STAGE_[PWA27726A] | 1 | |
| PWA27755 | ADAPTER, LIFTING - 1ST TURB ROTOR ASSY_[PWA27755] | 2 | |
| PWA27759 | ADAPTER, LIFTING - 2ND STG TURB ROTOR_[PWA27759] | 2 | |
| PWA27830 | ADAPTER, LIFT & TURN - LPC 4TH D&BLADE_[PWA27830] | 1 | |
| PWA27869 | ADAPTER, INDICATOR - FRT COMP DR TURB_[PWA27869] | 1 | |
| PWA27889 | ADAPTER,PLATE - FRT COMP DISK TABLOCK_[PWA27889] | 2 | |
| PWA27893 | ADAPTER,PLATE - LPC 3RD STG BLD TABLOCK_[PWA27893] | 2 | |
| PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
| PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
| PWA28106 | ADAPTER, HYD HOSE - ENG RIGGING | 5 | |
| PWA28940 | ADAPTER, BLEED | 5 | |
| PWA29370 | ADAPTER, ADAPTER,LEAK CHECK-ENGINE BREAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA29451 | ADAPTER, HYD PUMP - VSV ACTUATOR_0.45KG / 32 X 32 X 65MM [PWA29451] | 7 | |
| PWA29486 | ADAPTER, ENGINE PRESERVATION, FUEL PUMP | 5 | |
| PWA29667 | ADAPTER, DRAIN - FUEL SYSTEM DRAIN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45012 | ADAPTER, IPT COUPLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45024 | ADAPTER, #1 ADAPTER | 3 | |
| PWA45232 | ADAPTER, WRENCH | 3 | |
| PWA45233 | ADAPTER, #1 I/R WRENCH 2 LUG | 2 | |
| PWA45246 | Adapter, Wrench | 7 | |
| PWA45262 | Adapter, Flow Test | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45274 | ADAPTER, AIRFLOW | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45281 | ADAPTER, WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45456 | ADAPTER, PEDESTAL | 2 | |
| PWA45506 | Adapter, Vacuum Check | 1 | |
| PWA45532 | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | 4 | |
| PWA45532 REV NC | ADAPTER, FRONT HUB FRT. COMPR. ROTOR ANTI-ROTATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA4562 | ADAPTER,FLOW TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA45849 | ADAPTER, ANTI-ROTATION | 3 | |
| PWA500700 | ADAPTER,TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA75370 | ADAPTER,CLEANING-ENGINE ASSEMBLY,FUEL NOZZLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA76156 | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | 4 | |
| PWA76156 REV NC | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA76I56 | ADAPTER,LIFT & TURN-ENGINE ASSY,HPT RTNR(2-3/4 SPOOLS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80005 | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80005 REV C | ADAPTER, PEDESTAL - ENGINE ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80156 | ADAPTER, PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80157 | ADAPTER, PULLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80158 | ADAPTER, PULLER | 1 | |
| PWA8023 | ADAPTER, PEDESTAL - ADJUSTABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80230 | ADAPTER, PEDESTAL - ADJUSTABLE | 1 | |
| PWA80230 REV A | ADAPTER, PEDESTAL - ADJUSTABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80233-5 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80234/4 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80265 | ADAPTER, LIFT & TRUNNION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80495 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA80574 | ADAPTER, HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA81904 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA85167 | ADAPTER, SUPPORT | 1 | |
| PWA85168 | ADAPTER, SUPPORT | 1 | |
| PWA85433 | Adapter，fuel preserve-engine assy，fuel pump inlet | 7 | |
| PWA85451 | Adapter，fuel preserve-engine assy，fuel flowmeter outlet | 4 | |
| PWA85498 | ADAPTER,VACUUM CHECK-GEARBOX DEOILER OUTLET | 1 | |
| PWA85525 | ADAPTER, HOT OIL-OIL FOLTER HOUSING INLET | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA85749 | Adapter,torque | 2 | |
| PWA85791 | ADAPTER, CALIBRATION, HPC, 6 & 12 STG TIEROD TORQUE | 1 | |
| PWA85844 | ADAPTER ADAPTER, LEAK TEST-ENGINE ASSY | 2 | |
| PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA85862 | Adapter, Torque - Engine Assy, Fuel Pump, Retaining Bolts | 6 | |
| PWA86018 | Adapter，oil sampler-engine assy，gearbox chip detector | 2 | |
| PWA86136 | ADAPTER, VACUUM CHECK (LMT) | 1 | |
| PWA8641 | ADAPTER, HEX TO SPLINE | 1 | |
| PWA86461 | ADAPTER, TORQUE | 7 | |
| PWA86603A | ADAPTER, HOLDING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA87086 | ADAPTER, CALIBRATION, HPC, 11 STG TIEROD NUT TORQUE | 1 | |
| PWA87153 | ADAPTER, CALIBRATION, HPC, 9 STG TIEROD NUT TORQUE | 1 | |
| PWA87198 | ADAPTER,TORQUE-AIR/OIL COOLER, MOUNT BOLTS | 3 | |
| PWA87360 | ADAPTER, IDG REM, | 4 | |
| PWA87546 | ADAPTER,TORQUE | 1 | |
| PWA88112 | ADAPTER, VACUUM CHECK - GEARBOX BREATHER | 1 | |
| PWA88629 | ADAPTER,HOLDER-PMA RETAINING NUT | 1 | |
| PWA95856 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA98106 | ADAPTER, HYDRAULIC TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWA98110 | ADAPTER, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC30368 | ADAPTER, STUBSHAFT | 1 | |
| PWC30712 | Adapter, Engine Mount | 6 | |
| PWC30946 | ADAPTER, BALANCING | 2 | |
| PWC31058 | ADAPTER, REAR ENGINE MOUNT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC31327 | COLLAR ADAPTER, HP TURBINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC31423 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC31546 | ADAPTER, LP TURBINE RETAINING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC31885 | ADAPTER, HP TURBINE SHROUD SEGMENTS | 1 | |
| PWC32062 | ADAPTER, SOCKET | 5 | |
| PWC32271 | ADAPTER, TURBINE | 12 | |
| PWC32446 | ADAPTER, DISK VERTICAL BALANCING | 1 | |
| PWC34752 | ADAPTER, ENGINE MOUNT | 7 | |
| PWC37030 | ADAPTER, MEASURING, OIL PUMP SHAFT BEARING | 1 | |
| PWC37077 | ADAPTER, PULLER, OIL SEAL CARRIER, STARTER-GEN | 10 | |
| PWC37077A | Adapter, Pulling, Oil Seal Carrier | 2 | |
| PWC37110 | ADAPTER, IC CASE TO STAND | 5 | |
| PWC37111 | ADAPTER, REDUCTION GEARBOX TO STAND | 2 | |
| PWC37112 | Adapter, Engine to Rear Mount | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37147 | ADAPTER, L.P NUT (PRE SB) | 4 | |
| PWC37501 | ADAPTER, REDUCTION GEARBOX, LIFTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37502 | ADAPTER, MEASURING, UPPER TOWER SHAFT SPACER | 1 | |
| PWC37562 | ADAPTER, LP TURBINE SPACER | 4 | |
| PWC37613 | Adapter, Propeller Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37701 | Adapter, RGB Module | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37771 | ADAPTER, WRENCH | 11 | |
| PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37824 | ADAPTER, UPPER ANGLE DRIVE BEARING GAGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37825 | ADAPTER, REDUCTION GEARBXOR | 3 | |
| PWC37825D | ADAPTER, REDUCTION GEARBXOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC37826 | Adapter, RGB | 2 | |
| PWC37828 | ADAPTER, MEASURING, OIL PUMP TRANSFER BEARING | 1 | |
| PWC37933 | Adapter, Angle Drive Housing to PowerArm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC38001 | ADAPTER,RGBTOSTAND | 5 | |
| PWC38149 | Adapter, Anti-rotation, LP Impeller Retaining Nut (Post-SB20546) | 1 | |
| PWC38212 | ADAPTER, ENGINE TO REAR MOUNT | 7 | |
| PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
| PWC38247 | ADAPTER, ANTI-ROTATION, LP TURBINE | 5 | |
| PWC38307 | ADAPTER, FRONT | 3 | |
| PWC38395 | ADAPTER, HIGH PRESSURE TURBINE STUB SHAFT, PULLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC40562 | BRACKET, ADAPTER, ENGINE SLING | 4 | |
| PWC50216 | ADAPTER, FLOW, REDUCTION GEARBOX COVER | 1 | |
| PWC50350 | ADAPTER, DISK VERTICAL BALANCING | 3 | |
| PWC50390 | ADAPTER, PREP OIL | 1 | |
| PWC51719 | ADAPTER, GRINDING | 3 | |
| PWC52077 | ADAPTER, LP COMPRESSOR REMOVAL/INSTALLATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC52130 | ADAPTER, LIFTING SLING (CITATIONINSTALLED JT15D-4, -4B ONLY; POST- SB7158 | 1 | |
| PWC54212 | ADAPTER, SLING | 6 | |
| PWC54212D | ADAPTER, SLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC54213 | ADAPTER, SLING, ENGINE/TURBOMACHINERY, REAR | 6 | |
| PWC54213F | ADAPTER,REAR | 3 | |
| PWC54214 | ADAPTER, SLING, ENGINE, FRONT | 6 | |
| PWC54214D | ADAPTER,SLING ENGINE FONT | 2 | |
| PWC54214E | ADAPTER,SLING ENGINE FONT | 1 | |
| PWC54215 | ADAPTER, LIFTING | 2 | |
| PWC54267 | ADAPTER, HPT DISK/STUBSHAFT BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC54609 | ADAPTER, HIGH PRESSURE TURBINE DISK BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC54967 | ADAPTER, BALANCING, PT DISK ROTOR | 2 | |
| PWC55282 | ADAPTER, BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC55283 | ADAPTER, BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC55284 | ADAPTER, BALANCING | 1 | |
| PWC55554 | ADAPTER, FUEL INHIBITING | 6 | |
| PWC56260 | ADAPTER, HPT DISK/STUBSHAFT, BALANCING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC56799 | ADAPTER, RGB TO SLING | 4 | |
| PWC56870 | Adapter, Propeller Shaft | 1 | |
| PWC56871 | ADAPTER, PROPELLER CONTROL COUPLING | 6 | |
| PWC57325 | ADAPTER, FERRULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC57326 | ADAPTER, NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC57330 | ADAPTER, FERRULE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC57331 | ADAPTER, NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC57411 | ADAPTER, MOTIVE SPACE FLOW | 5 | |
| PWC57573 | ADAPTER, SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC58758 | ADAPTER, APU TRANS-PORT | 4 | |
| PWC58759 | ADAPTER, APU BAR | 2 | |
| PWC59053 | ADAPTER, DESALINATION | 8 | |
| PWC61059 | ADAPTER,GEARSHAFT | 3 | |
| PWC70124 | ADAPTER, LIFTING | 4 | |
| PWC70162-1 | Adapter, Flushing, RGB Output Housing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-10 | Adapter, Flushing, RGB Output Housing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-11 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-13 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-15 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-16 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-18 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-19 | Adapter, Flushing, RGB Output Housing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-3 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-5 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-7 | ADAPTER, FLUSHING, RGB OUTPUT HOUSING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70162-8 | Adapter, Flushing, RGB Output Housing | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC70319 | ADAPTER, LIFTING (AGB) | 3 | |
| PWC70386 | ADAPTER, LIFTING | 1 | |
| PWC70653 | ADAPTER, POWER SECTION SLING, DEAD LOAD TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| PWC71392 | ADAPTER, HYDRAULIC | 5 | |
| PWC71489 | ADAPTER, ANTI-ROTATION | 2 | |
| PWC90191 | ADAPTER, USB TO RS232 | 1 | |
| R-1117 | NOSE JACK PAD ADAPTER, 1 REQUIRED | 12 | |
| R-1187-01 | PAD: ADAPTER,JACK, | 3 | |
| R-1733 | ADAPTER, WING JACK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| R-1798 | ADAPTER, JACK PAD | 6 | |
| R-1807 | PAD: ADAPTER,JACK, | 6 | |
| R-1988 | ADAPTER, JACK, WING | 12 | |
| R1117 | PAD: ADAPTER,LEVELING,JACK, | 12 | |
| R1187-01 | PAD: ADAPTER,JACK, | 3 | |
| R1187-02 | PAD: ADAPTER,JACK, | 4 | |
| R1239 | PAD: ADAPTER,JACK, | 8 | |
| R1798 | PAD: ADAPTER,JACK, | 6 | |
| R1807 | PAD: ADAPTER,JACK, | 6 | |
| R1808 | PAD: ADAPTER,JACK, | 6 | |
| R1988 | PAD: ADAPTER,LEVELING,JACK, | 12 | |
| R2008 | PAD: ADAPTER,JACK, | 3 | |
| R46014 | ADAPTER, WRENCH AXLE NLG | 27 | |
| RB 145G0076-301 | Reaction Adapter, Forward Transmission | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101304 | Adapter, Tool | 1 | |
| RB T101382 | RAM ADAPTER,SCISSOR | 1 | |
| RB T101623-7 | Adapter, Cradle Set-Support, Main Rotor Blade | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101859 | Press Adapter, Bearing Inner Ring | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T101972 | Holding Plate Set, Adapter, Tail Rotor Drive | 2 | |
| RB T103003 | Adapter, Main Trans Input Pinion Bearing Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103013 | Wrench & Adapter, Collector Shaft | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103101 | Adapter, Main Trans Input Bearing Installation | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB T103110 | Adapter, Bearing Install | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB23006782 | Adapter, Torque Turbine Attach Lower Nut | 1 | |
| RB23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| RB23006783-A | Adapter, Torque Turbine Attach | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RB6799790 | ADAPTER, TURNING | 2 | |
| RB6891350 | ADAPTER, SUPPORT TURBINE | 1 | |
| RB92700-10355-101 | ADAPTER, TORQUE | 1 | |
| RBA6300-80906 | Wrench Adapter, Landing Gear Damper | 1 | |
| RBD29822-5 | ADAPTER, TORQUE WRENCH | 1 | |
| RBT18501 | Adapter, Torque Turbine Attach | 1 | |
| RBW109-3130-34-1 | Adapter, Tail Rotor Yoke Bushing Install | 1 | |
| RBW109-3501-08-115 | ADAPTER, LANDING GEAR SHOCKSTRUTS NITROGEN CHANGE | 2 | |
| RBW3205G01032-3G | ADAPTER, WHEEL BRAKE BLEED SYSTEM | 1 | |
| RBW6205G09031-3G | TROLLEY ADAPTER, M/R HEAD SUPPORT (HE-19-00) | 1 | |
| RBW6205G09132-3G | TROLLEY ADAPTER, SWASHPLATE SUPPORT | 2 | |
| RBW6305G10931-3G | Adapter, Main Gear Box Upper Fitting Removal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RBW6405G06131-3G | TROLLEY ADAPTER, T/R HEAD SUPPORT | 1 | |
| RBW6420G00131-8G | TROLLEY ADAPTER, T/R HEAD SUPPORT | 1 | |
| RC2180G01 | ADAPTER, OFFSET, 12", FUTUREDRIVE NG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RC2990G01 | ADAPTER, MANUAL DRIVE PAD, GENX-1B & GENX-2B ENGINE, FUTUREDRIVE NG | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RFP-13001-001-2011 | ADAPTER,TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ROCAGE15011 | TORQUE ADAPTER, BALANCE NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| RRT033861 | ADAPTER, INHIBITING | 3 | |
| RRT033866 | ADAPTER, INHIBITING RIG CONNECTOR | 3 | |
| RRT063357 | ADAPTER, AIRCRAFT ENGINE | 1 | |
| RRT065693 | ADAPTER, AIRCRAFT ENGINE | 2 | |
| RSE 6403 | ADAPTER, INLET LIFTING | 7 | |
| RSE1234 | ADAPTER,TEST,LATCH ENGINE | 17 | |
| RXHAD | Ionic Systems RX Hose Adapter, 3/8 in Hose To 1/2 in Fitting | 1 | |
| S34146-4 | ADAPTER, STATIC LINE | 9 | |
| S44328L225-4 | 328 ADAPTER, | 2 | |
| S51089-4 | Barfield S51089-4 Pitot Static Test Adapter, For Fixed Wing Aircraft | 2 | |
| S51089B | STATIC BLANKING ADAPTER, | 2 | |
| SAE AS21900D8 | ADAPTER, FLOOR RUN TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SBTOOL-023K90 | KIT, ADAPTER, RIGHT ANGLE | 1 | |
| SK2043C | ADAPTER, EMERGENCY AIR AND STRUT | 10 | |
| SKASR20-4 | Barfield SKASR20-4 Pitot Static Adapter, For Cirrus Aircraft | 2 | |
| SKX100-4-4-4 | STATIC TEST ADAPTER, | 3 | |
| SPD71308 | ADAPTER, GEO/ISUZU | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPD71319 | ADAPTER,SM.SCHRD.VLV FORD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPDTU15-4A | M24X2.0 INJ ADAPTER,USE W/TU15 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPK-FMG-143 | ADAPTER, FLAT DISC 1/2" | 1 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1558 | LEVERAGE ADAPTER, ACCESS PANEL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-1751 | EQUIPMENT -ADAPTER, CONTROL WHEEL- | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SPL-4200 | Adapter, Torque | 1 | |
| SPL-9790 | CABLE - ADAPTER, ALLIED SIGNAL (SUNDSTRAND) DFDR TESTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SRCZB | BOOM/HOOK ADAPTER, | 1 | |
| SRDH34-3CL | ADAPTER, TORQUE 1/2" DR, 1 1/16" WR (SHAVED) | 1 | |
| SRDH341 | ADAPTER, TORQUE, 1/2" DRIVE, 3" LENGTH, 1-1/16" | 1 | |
| SRES18 | ADAPTER, TORQUE 1/2" DR, 9/16" WR (SHAVED) | 3 | |
| SRES22 | ADAPTER,TORQUE WRENCH;SINGLE END 0.688";SINGLE END 0.500";SINGLE END INTERNAL SPLINE;SINGLE END INTERNAL SQUARE; STEEL;BOX END;|3.000";12;NO. 22 SPLINE SIZE; CHROMIUM; | 3 | |
| SS-4-HC-A-401 | STAINLESS STEEL HOSE CONNECTOR, 1/4 IN. TUBE ADAPTER, 1/4 IN. HOSE ID | 1 | |
| SS-4-SAE-7-4 | STAINLESS STEEL PIPE FITTING, ADAPTER, 7/16-20 MALE SAE/MS STRAIGHT THREAD X 1/4 IN. FEMALE NPT | 1 | |
| SS40998B-1125 | Static Test Adapter, G100/G150/G200 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST2580-251 | STANDARD TOOL - TORQUE WRENCH ADAPTER, 0.375 SLOT - 5-INCH OUTSIDE DIAMETER | 9 | |
| ST2580-550A | TORQUE ADAPTER, RATCHETING | 1 | |
| ST2583-1 | Adapter, Flap Drive | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST60419 | ADAPTER, PICK-UP TUB | 1 | |
| ST90683 | ADAPTER, VIBRATION | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST90838 | Adapter, Assembly Interface Device | 2 | |
| ST93014 | Adapter, Puller | 2 | |
| ST93014 PM | ADAPTER, PULLER | 1 | |
| ST992B | ADAPTER, GREASE GUN, CARGO DOOR | 9 | |
| ST992B-1 | ADAPTER,GREASEGUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| ST992B1 | ADAPTER, GREASE GUN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE 67 | ADAPTER, RATCHET | 1 | |
| SWE13852-1210 | ADAPTER, ARM, ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE13852-40 | ADAPTER, ARM, | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE13852-500 | ADAPTER, GROUND HANDLING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE13852-750 | ADAPTER,HUB-BLADE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| SWE67B | ADAPTER, WRENCH (PROPELLERS) | 3 | |
| SWP102 | CAPSTAN ADAPTER, BLOCK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-05590 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-1 81246 | ADAPTER, POWER ARM | 1 | |
| T-186078 | Adapter,Power Arm | 1 | |
| T-186078PM | ADAPTER,POWER ARM | 1 | |
| T-236165 | ADAPTER,HOLDING | 1 | |
| T-236165PM | ADAPTER,HOLDING | 1 | |
| T-260674-01 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-300664 | Adapter, power arm | 1 | |
| T-304040 | Adapter, Power | 2 | |
| T-372 | ADAPTER, TORQUE ARM | 1 | |
| T-423472 | Adapter, mounting | 1 | |
| T-449445 | Adapter,Sleeve | 1 | |
| T-449445PM | ADAPTER,SLEEVE | 1 | |
| T-475976-1-1 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-475976-1-14 | ADAPTER, RETAINER TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-475976-1-16 | ADAPTER, TCPS TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-475976-1-19 | ADAPTER, TEST, DISCHARGE OUTLET SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-475976-1-20 | ADAPTER, TEST, DISCHARGE OUTLET SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T-71043 | TORQUE ADAPTER, GLAND RETAINER | 1 | |
| T-71043A | TORQUE ADAPTER, ROD BEARING RETAINER | 1 | |
| T-71681 | Torque Adapter, Pressure Differential Sensor | 1 | |
| T-73786 | Torque Adapter, Relief Valve | 1 | |
| T-803-0002-4 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T.646051 | ADAPTER,HIDRACLAMP | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T.646090 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101304 | ADAPTER, TOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101382 | RAM ADAPTER,SCISSOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T101561 | ADAPTER,TORQUE WRENCH | 1 | |
| T101972 | HOLDING PLATE SET, ADAPTER, TAIL ROTOR DRIVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T14413 | ADAPTER, HEXAGON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T25817 | Adapter, Motor Drive Shaft Torque | 1 | |
| T26760 | Adapter, Power Arm | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T41000870-1 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| T750A | SET: ADAPTER,TOWBAR,UNIV, | 1 | |
| TA-840105-3 | ADAPTER, PROOF PRESSURE TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TA1J3200E | ADAPTER,LIFTING-POD | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TA3 | ADAPTER, 1/4" INTERNAL DRIVE X 3/8" EXTERNAL DRIVE | 6 | |
| TE27295-01 | Adapter, Plate Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE60B00019 | HARNESS - CALIBRATION ADAPTER, OIL QUANTITY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B00776 | HARNESS ASSEMBLY - FUEL QUANTITY INDICATOR, CALIBRATION ADAPTER, NUMBER 2 AND NUMBER 3 MAIN AND CENTER WING TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 2 | |
| TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B90110 | ADAPTER,ENGINE START VALVE TUBE | 1 | |
| TELM10B | ADAPTER, SOCKET, CROW FOOT SOCKET WRENCH HEAD | 1 | |
| TES-3776 | Adapter,Motor | 1 | |
| TF10-04 | ADAPTER, STRAIGHT, TUBE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL5585 | ADAPTER, TORQUE | 3 | |
| TL5587 | ADAPTER, HUB | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TL5596 | ADAPTER, HOISTING | 2 | |
| TL5600 | ADAPTER, PROPELLER BOLT | 2 | |
| TL5604 | ADAPTER, HOISTING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TM2421G002 | ADAPTER, FITTING | 3 | |
| TM4125DZ | ADAPTER, VENTILATION, FUEL TANK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TMHDI31-00-00 | ADAPTER, M.NATO/F1/4G (ASSY) | 1 | |
| TMHNA01-00-00 | ADAPTER, ATR42/72 NLG, JACKING | 9 | |
| TMHNA10-00-00 | ADAPTER, NOSE LANDING GEAR | 1 | |
| TN-3496-420 | ADAPTER, TORQUE WRENCH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TN455044-8 | JACK ADAPTER, ENGINE BEAM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TS.303 R17A | ADAPTER, FOR USE WITH 25YTS.303R1A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TSF36T-11001-10 | ADAPTER, APU BLEED AIRCHECK VALVE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TSJ60B00002-2 | TEST JIG - AUTO-THROTTLE ADAPTER, ATTITUDE SIMULATION TABLE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| TV74703G | ADAPTER, ORAL TUBE TEST | 1 | |
| UPORT 1110 | 1-PORT USB-TO-SERIAL ADAPTER, RS-232 | 2 | |
| UT713 | ADAPTER, SELF-SEALING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| V-798CN | ADAPTER, FUEL DRAIN | 1 | |
| V798CN | Adapter, Fuel Drain | 1 | |
| VCAN-DW3 | ADAPTER, VALUECAN USB TO CAN BUS WITH NEOVI SOFTWARE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VQCT118256-1 | ADAPTER, ROTATE TOOL, GG8 GEARBOX | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VQPWA77420 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| VQTC350-141 | ADAPTER, LIFT & TURN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WASATN-B005 | ADAPTER,WRNCHSTEERACTU.TRUNNUT | 1 | |
| WSPL-21 | ADAPTER, APU TRANSPORT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-00249 | ADAPTER, TEST, TCPS | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-00489 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-01944 | ADAPTER, TORQUE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-02115 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-02322 | ADAPTER, TEST, DISCHARGE OUTLET SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-02323 | ADAPTER, TEST, DISCHARGE OUTLET SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT-03015 | Adapter, Torque | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| WT02115 | ADAPTER, CHARGING | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| Z-1694 | WLDMNT,AXLE JACK ADAPTER, | 1 | |
| Z1694 | WLDMNT,AXLE JACK ADAPTER, | 1 | |
| Z3275 | NOSE ADAPTER, | 1 | |
| Z72-006 | ADAPTER, HMU IDLER ADAPTER CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| lC6l89 | ADAPTER, PRESSURE RUBE ADAPTER | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| MBEU82401 | ADAPTER,TEST | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| 35-92281-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | |
| 63687-1 | ADAPTER, ORAL TUBE TEST | 2 | |
| PWC40562 | BRACKET, ADAPTER, ENGINE SLING | 4 | |
| 97A28002542000 | ADAPTER,DRAIN MAST | 5 | |
| 97A76102003000 | SPRING SCALE ADAPTER,THROTTLE CONTROL LE | 8 | |
| 98A27508062000 | ADAPTER,USE TO EXAMINE THE TORQUE/REVOLU | 2 | |
| 98A27804001000 | ADAPTER,TORQUE SET,USED TO ROTATE SLAT D | 3 | |
| 98A28108465000 | ADAPTER,WATER DRAIN,USED TO DRAIN THE WA | 5 | |
| 98A32103003000 | TORQUE ADAPTER,USE TO TORQUE REAR ATTACH | 7 | |
| 98A76103004000 | ADAPTER,SPRING SCALE,T/R CONTROL LEVER | 5 | |
| 99A34103001000 | CHARGING ADAPTER,STATIC PORT | 7 | |
| 99A34103002000 | COVER BLANKING CHARGING ADAPTER,STATIC P | 7 | |
| 9C3403G01 | ADAPTER,FOR INSTALL / REMOVAL LINE REPLA | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| A27071-96 | INPUT ADAPTER,ASSEMBLY,FOR ROTARY ACTUAT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
| C1-21870 | POSITIONING ADAPTER,USED TO HANDLE NOSE | 4 | |
| C1-21872 | POSITION ADAPTER,HANDLE MLG MAIN STRUT D | 2 | |
| C22971 | JACK ADAPTER,USED TO PARTIALLY LIFT THE | 6 | |
| CHA141377 | CHECKING ADAPTER,END FLOAT | 4 | |
| CHA700-224 | ADAPTER,BACKLASH CHECKING,USED TO CHECK | 6 |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
