Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
2C14096P08 | 6 PLATE | 1 |
Partial Match
Part Number | Description | Sources Available | Tool Request Qty |
---|---|---|---|
006.330.6000 | PLASTIC JAW PLATE 006.330.6000, ECKOLD KRAFT FORMER | 1 | |
02-7813C0100 | AXLE JACK,12 TON-NLG - INCLUDING SLIPPER PLATES Z-2168-01 AND Z2169-01 | 23 | |
025170004-001 | CUT OUT TEMPLATE AFSB-B737-17-001-46-01 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-A | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: .688" )( Bolt Size: #6 )( Drill Size: #40 )( Pilot Diameter: .139" )( Type: Two Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-B | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: .688" )( Bolt Size: #8 )( Drill Size: #40 )( Pilot Diameter: .164" )( Type: Two Lug Type Style 1 ) | 1 | |
04-518-C | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: .688" )( Bolt Size: #10 )( Drill Size: #40 )( Pilot Diameter: .191" )( Type: Two Lug Type Style 1 ) | 1 | |
04-518-E | Nut Plate Drill Jigs ( A' Dimension: .500" )( B' Dimension: 1.000" )( Bolt Size: 5/16" )( Drill Size: #30 )( Pilot Diameter: .312" )( Type: Two Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-G | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: - )( Bolt Size: #6 )( Drill Size: #40 )( Pilot Diameter: .139" )( Type: One Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-H | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: - )( Bolt Size: #8 )( Drill Size: #40 )( Pilot Diameter: .164" )( Type: One Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-N | Nut Plate Drill Jigs ( A' Dimension: .500" )( B' Dimension: 1.000" )( Bolt Size: - )( Drill Size: #30 )( Pilot Diameter: .6875" )( Type: Two Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-NA | NUTPLATE DRILL JIG-2 LUG TYPE #4 A=.203 B=.406 C=.112 D=#40 | 1 | |
04-518-NB | NUTPLATE DRILL JIG-2 LUG TYPE #6 A=.218 B=.436 C=.139 D=#40 | 1 | |
04-518-NC | NUTPLATE DRILL JIG-2 LUG TYPE #8 A=.234 B=.468 C=.164 D=#40 | 1 | |
04-518-NE | Nut Plate Drill Jigs ( A' Dimension: .281" )( B' Dimension: .562" )( Bolt Size: 1/4" )( Drill Size: #40 )( Pilot Diameter: .248" )( Type: Two Lug Type Style 2 ) | 1 | |
04-518-NF | NUTPLATE DRILL JIG-2 LUG TYPE 5/16"A=.3125B=.625C=.312D=#30 | 1 | |
04-518-P | Nut Plate Drill Jigs ( A' Dimension: .6875" )( B' Dimension: 1.375" )( Bolt Size: - )( Drill Size: #30 )( Pilot Diameter: .811" )( Type: Two Lug Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-PB | Nut Plate Drill Jigs ( A' Dimension: .218" )( B' Dimension: - )( Bolt Size: 6" )( Drill Size: #40 )( Pilot Diameter: .139" )( Type: One Lug Type Style 2 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-PC | Nut Plate Drill Jigs ( A' Dimension: .234" )( B' Dimension: - )( Bolt Size: #8 )( Drill Size: #40 )( Pilot Diameter: .164" )( Type: One Lug Type Style 2 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-R | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: - )( Bolt Size: #6 )( Drill Size: #40 )( Pilot Diameter: .139" )( Type: Corner Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-S | Nut Plate Drill Jigs ( A' Dimension: .344" )( B' Dimension: - )( Bolt Size: #8 )( Drill Size: #40 )( Pilot Diameter: .164" )( Type: Corner Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-SB | Nut Plate Drill Jigs ( A' Dimension: .218" )( B' Dimension: - )( Bolt Size: #6 )( Drill Size: #40 )( Pilot Diameter: .139" )( Type: Corner Type Style 2 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-SC | Nut Plate Drill Jigs ( A' Dimension: .234" )( B' Dimension: - )( Bolt Size: #8 )( Drill Size: #40 )( Pilot Diameter: .164" )( Type: Corner Type Style 2 ) | 1 | |
04-518-TC | Nut Plate Drill Jigs ( A' Dimension: .312" )( B' Dimension: .250" )( Bolt Size: 5/16" )( Drill Size: #30 )( Pilot Diameter: .312" )( Type: Mini Anchornut Type ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-518-V | Nut Plate Drill Jigs ( A' Dimension: .500" )( B' Dimension: - )( Bolt Size: 5/16" )( Drill Size: #30 )( Pilot Diameter: .312" )( Type: Corner Type Style 1 ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-636 | Nickel Plated Spring Clamps ( Jaw Opening: 2" (51 Mm) )( Overall Length: 6" (152 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
04-639 | Nickel Plated Spring Clamps ( Jaw Opening: 3" (76 Mm) )( Overall Length: 9" (229 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
067J615 | 6IN KICKPLATE FOR KRL1501 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
067J615PC | 6IN KICKPLATE FOR KRL1501 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
067J615PCM | 6IN KICKPLATE FOR KRL1501 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
067J615PDG | 6IN KICKPLATE FOR KRL1501 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10760.CV.36 | 36MM HEXKEY WRENCH NICKELPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
10760.CV.6 | 6MM HEX KEY WRENCH NICKELPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
11C4431G01 | SPL-20604 - BLANKING PLATES - IDG/EDP, GENX-2B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
13100 | NUT PLATE JIG #6, 2 LUG 518A | 1 | |
16680M6 | KNURLED THUMB NUTS M6 ZINC PLATED DIN 466 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
194LH | Boeing Standard, 737 PT6 53-30-00:PG5 FIG3 DETAIL3, .072" plates | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2101 GC-1601P | ERGO-SIDE CUTTING PLIER,CHROME-PLATED, LG. 160MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2544A1 | T-HANDLE TAP DRIVER (CHROME PLATED 1/16-1/4) | 1 | |
294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294867-1 | BEARING REMOVAL PLATE (SUPPORTS 3860173-1 BEARING WHEN REMOVING 3860181-1 SPUR GEAR FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-2 | BEARING REMOVAL PLATE (SUPPORTS 358457 BEARING WHEN REMOVING 3860169-1 FAN SPUR GEAR FROM BEARINGS) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-3 | BEARING REMOVAL PLATE (SUPPORTS 358027 BEARING WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-4 | BEARING REMOVAL PLATE (USED TO SUPPORT 3860160-1 BEARING WHEN REMOVING 3860168-1 STARTER GEAR FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-5 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-2 SPUR GEARSHAFT FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-7 | BEARING REMOVAL PLATE (USED TO SUPPORT 892575-1 BEARING WHEN REMOVING 3860167-1 SPLINED SHAFT FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
294870-8 | BEARING REMOVAL PLATE (SUPPORTS 3605094-1 BEARING WHEN REMOVING 3860180-5, -6 SPUR GEARSHAFT FROM BEARING) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2C14155P06 | SPL-20451 - COVER PLATE - IDG, GE CF6-80C2 ENGINE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
2MIT2A264-0812-1 | ADAPTER PLATE - 40 TO 65 GALLON TANK (737NG ALL, 767 OPTIONAL AUX TANK SEE OPTIONS BELOW) | 5 | |
2MIT65B90101-1 | INSTAL TEMPLATES - PRECOOLER O/F/V_[2MIT65B90101-1] | 1 | |
30-100-50-8 | Nut Plate Drill Bits ( Body & Countersink Diameter: .250" )( Drill Diameter: .1285" )( Tip Length: 0.560" )( Type: H.S.S. ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
30-100-50-8C | Nut Plate Drill Bits ( Body & Countersink Diameter: .250" )( Drill Diameter: .1285" )( Tip Length: 0.560" )( Type: Cobalt ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3101A53610275 | DRILLING TEMPLATE (F6198) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3101A53610284 | DRILLING TEMPLATE (F6198) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3102A53610275 | DRILLING TEMPLATE (F6198) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-002 | Standard, Cylinder, Landing Gear, B757/767, .375" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-004 | Standard, Cylinder, Landing Gear, B757/767, .400" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-006 | Standard, Cylinder, Landing Gear, B757/767, .425" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-008 | Standard, Cylinder, Landing Gear, B757/767, .450" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-010 | Standard, Cylinder, Landing Gear, B757/767, .475" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
32-0492-012 | Standard, Cylinder, Landing Gear, B757/767, .500" Thick, 4340M per 7.26 CL1 - HEAT TREAT/STRESS RELIEF/CHROME PLATE to .015 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
369A9930 | MIXER RIGGING PLATE (P/N 369A9930) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
36X36AA | 36"X36" SURFACE PLATE | 1 | |
3862212-3 | APU BLANKING PLATES B49006-1 | 11 | |
3916001-1 (PART OF LEVELING KIT) | PLATE (IN 0011269) | 1 | |
4-40-M30RW-2.5-304SS | FLOW MEASURING SECTION (FIXED ORIFICE, 55 TO 65 LB/MIN (24.9 TO 29.5 KG/MIN), RECOMMEND 6.0 INCHES (152.4 MM) LINE WITH 2.0 INCHES (50.8MM) ORIFICE PLATE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
40-100-50-8 | Nut Plate Drill Bits ( Body & Countersink Diameter: .187" )( Drill Diameter: .0980" )( Tip Length: 0.560" )( Type: H.S.S. ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
40-100-50-8C | Nut Plate Drill Bits ( Body & Countersink Diameter: .187" )( Drill Diameter: .0980" )( Tip Length: 0.560" )( Type: Cobalt ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-HS14 | Diamond Plated Integral Shank Hole Saws ( Head Height: 2-1/2" (64 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-HS16 | Diamond Plated Integral Shank Hole Saws ( Head Height: 3" (76 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MHS1-1/16 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 1-1/16" (27 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MHS1-3/16 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 1-3/16" (30 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MHS2-1/2 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 2-1/2" (64 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MHS3 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 3" (76 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MHS5/8 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 5/8" (16 Mm) ) | 1 | |
49-MHS9/16 | Arbor Mount Diamond Plated Hole Saws ( Head Height: 9/16" (14 Mm) ) | 1 | |
49-MS1-1/2S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 1-1/2" (38 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS1-1/2U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 1-1/2" (38 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS1-1/4S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 1-1/4" (32 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS1-1/4U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 1-1/4" (32 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS1S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 1" (25 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS1U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 1" (25 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS2-1/2S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 2-1/2" (64 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS2-1/2U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 2-1/2" (64 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS2S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 2" (51 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS2U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 2" (51 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS3-1/2S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 3-1/2" (89 Mm) )( Plated Thickness (kerf): .080" To .100" ) | 1 | |
49-MS3-1/2U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 3-1/2" (89 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS3/4S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 3/4" (19 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS3/4U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 3/4" (19 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS3S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 3" (76 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS3U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 3" (76 Mm) )( Plated Thickness (kerf): .080" To .100" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS4-1/2S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 4-1/2" (114 Mm) )( Plated Thickness (kerf): .102" To .130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS4-1/2U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 4-1/2" (114 Mm) )( Plated Thickness (kerf): .102" To .130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS4S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 4" (102 Mm) )( Plated Thickness (kerf): .102" To .130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS4U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 4" (102 Mm) )( Plated Thickness (kerf): .102" To .130" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS5S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 5" (127 Mm) )( Plated Thickness (kerf): .130" To .150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS5U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 5" (127 Mm) )( Plated Thickness (kerf): .130" To .150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS6S | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Slotted )( Outside Diameter: 6" (152 Mm) )( Plated Thickness (kerf): .130" To .150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-MS6U | Mounted Diamond Plated Saw Blades Mounted 40/60 Grit - 1/8" Return ( Type: Unslotted )( Outside Diameter: 6" (152 Mm) )( Plated Thickness (kerf): .130" To .150" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R1UR | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/8" )( Type: Unfluted, Radius End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R1US | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/8" )( Type: Unfluted, Square End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R3FR | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/4" )( Type: Fluted, Radius End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R3FS | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/4" )( Type: Fluted, Square End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R3UR | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/4" )( Type: Unfluted, Radius End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-R3US | Diamond Plated Routers ( Head Length: 1/4" (6.35 Mm) )( Outside Diameter: 1/4" )( Type: Unfluted, Square End ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB1-1/2S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 1-1/2" (38 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB1-1/2U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 1-1/2" (38 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB1S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 1" (25 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB1U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 1" (25 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB2-1/2S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 2-1/2" (64 Cm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB2-1/2U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 2-1/2" (64 Cm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB2S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 2" (51 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB2U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 2" (51 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB3-1/2S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 3-1/2" (89 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB3-1/2U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 3-1/2" (89 Mm) )( Plated Thickness (kerf): .060" To .080" ) | 1 | |
49-SB3S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 3" (76 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB3U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 3" (76 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB4S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 4" (102 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB4U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 4" (102 Mm) )( Plated Thickness (kerf): .060" To .080" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB6S | Arbor Mount Diamond Plated Saw Blades ( Type: Slotted )( Outside Diameter: 6" (152 Mm) )( Plated Thickness (kerf): .090" To .110" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-SB6U | Arbor Mount Diamond Plated Saw Blades ( Type: Unslotted )( Outside Diameter: 6" (152 Mm) )( Plated Thickness (kerf): .090" To .110" ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
49-TD2 | Diamond Plated Twist Drills ( Head Height: 1/4" (6.35 Mm) ) | 1 | |
49-TD4 | DIAMOND PLATED TWIST DRILLS 7/16 DIA. STANDARD GRI | 1 | |
49-TD6 | Diamond Plated Twist Drills ( Head Height: 5/8" (16 Mm) ) | 1 | |
5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
5543A89 | CHROME-PLATED 12-POINT DEEP SOCKET, 1/4" DRIVE, 3/16" SIZE | 1 | |
5807006-000 | 5807006-000 TEMPLATE AILERON | 1 | |
5807006-000 TEMPLATE AILERON | 5807006-000 TEMPLATE AILERON | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60710000-3 | TEMPLATE, STALL VANE, M60 LH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60710000-4 | TEMPLATE, STALL VANE, M60 RH | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60J615LPV | 60IN SKIRT PLATE LEFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
60J615RPV | 60IN SKIRT PLATE RIGHT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6796950-8 | PRESSING PLATE (BELL 206A/B) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
72PY06407RWB07 | CASTER-RIGID-6X2 POLY ON IRON-6.25"X7.5" TOP PLATE | 1 | |
72PY06407SLWB07 | CASTER-SWIVEL-6X2 POLY ON IRON-6.25"X7.5" TOP PLATE-SWIVEL LOCK | 1 | |
7947479-10 | AIR FORCE GENERAL PURPOSE EDDY CURRENT STANDARD. STANDARD IS A THREE (3) PLATE ASSEMBLY MEASURING 4" X 7" X 1.06". CONTAINS TWENTY (20) FASTENER HOLES WITH DIAMETERS FROM 0.156 TO 0.750", TWO (2) SCREW HOLES, AND TWO (2) DOWEL PINS HOLES. STANDARD ALSO... | 3 | |
7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
820593-1 | PLATE, SUPPORT - (POST SB 568F-61-28) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
853-115-000-0 | CLE PLATE JUPE ECROU DENT DIAM. 6S | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
856A3796-2 | IDG BLANKING PLATE W/6 BOLTS (WITHOUT QAD) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
89015K25 | ALUMINUM PLATE 6061-T6 0.025 X 6" X 48" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
92350 | Flex Diamond Hand Sanding Pads ( Gun Included: 70 )( Type: Plated/Flexible (for Grinding) )( Size/diameter: 2-1/2" X 4-1/4" (64 X 108 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
92351 | Flex Diamond Hand Sanding Pads ( Gun Included: 120 )( Type: Plated/Flexible (for Grinding) )( Size/diameter: 2-1/2" X 4-1/4" (64 X 108 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
92352 | Flex Diamond Hand Sanding Pads ( Gun Included: 220 )( Type: Plated/Flexible (for Grinding) )( Size/diameter: 2-1/2" X 4-1/4" (64 X 108 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
92353 | Flex Diamond Hand Sanding Pads ( Gun Included: 400 )( Type: Plated/Flexible (for Grinding) )( Size/diameter: 2-1/2" X 4-1/4" (64 X 108 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
92354 | Flex Diamond Hand Sanding Pads ( Gun Included: 600 )( Type: Plated/Flexible (for Grinding) )( Size/diameter: 2-1/2" X 4-1/4" (64 X 108 Mm) ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601029 | NAME PLATE FOR SPT-660-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601408 | NAMEPLATE FOR SPW-660S-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601409 | NAMEPLATE FOR SPW-660D-40 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601410 | NAMEPLATE FOR SPW-660D-4 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
601414 | NAMEPLATE FOR SPW-660SD-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
3862212 | APU BLANKING PLATES B49006-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
6797115 | PLATE - NO. 60 PROP SHAFT | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
23068589 | Plate – Oil Test No. 6 Seal | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
43150006 | 6MM HEX KEY WRENCH NICKELPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
43150036 | 36MM HEXKEY WRENCH NICKELPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
460004821 | 146 THRUST PLATE SPANNER | 4 | |
460005930 | EXTRACTOR - BEARING PLATE NLG (MV7632-5-32) | 1 | |
9590003600 | FOAM PLATE AIREX S56-100_THICKNESS 3MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
820156019001201 | CONFORMITY TEMPLATE (F6198) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
97519A065 | POP RIVET 3/16 X .825 STEEL ZINC PLATED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9811960210 | JFM 9811960210 Current Selectors Plate Assembly | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
99A57103013000 | Airbus Kit, Includes 1 ea of XA-605T (A5068), WE CANNOT SUPPLY THE TEMPLATES | 1 | |
99D52103002000 | Template, A320 PT6 52-11-04 | 2 | |
99D52103003000 | Template, A320 PT6 52-13-04 | 1 | |
99D53103002000 | Template, A320 PT6 53-11-82 | 1 | |
99D57204197000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. Note: Repair Plate = .236" | 1 | |
99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2159 | HANDLING PLATE HPC ROTOR SPOOL STAGES 7-9 DISK 6 ASSEMBLY | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2159G01 | HANDLING PLATE - HPCR DISK 6 SPOOL 7/9 & CDP SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2242G02 | SEATING PLATE - HPCR STG 6 DISK & STG 2/5 SPOOL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2267G02 | STATIC BALANCE BASEPLATE - HPCR BLADED DISK STG 6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
9C2287G03 | SEATING PLATE - HPCR STG6 DISK/STG 7/9 SPOOL/CDP SEAL | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A21009-1 | PLATE F/767 BLANKING PLATE | 4 | |
A24006-1 | B767 BATTERY HOIST PLATE TOOL | 5 | |
A30002-1 | PLATE - BLANK (SPL-12691) | 5 | |
A31003-22 | PLATE ELECTRICAL .06 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
A365-210 | MH-65C ROTOR HUB, SWASH PLATE APERTURE, ENGINE AREA COVER (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044/15-5 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044/304 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044/718 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044/Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044AL | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2044S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2068 | CUSTOM CORROSION TEST PLATE 7075-T6 ALUMINUM. , 5%, 10%, 20%. PLATE SIZE: 8.0" x 5.0" x .125". 1.0"Ø SPOTFACE 3 PLACES. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-2161/4130 | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 1.10", 1.20", 1.30", 1.40", 1.50", 1.60", 1.70", 1.80", 1.90" 2.00" +/-.001". 0.75" x 0.75" Step Pad Face. Material: 4130 Carbon Steel, Nickel Plated. Includes Certification Report traceable to NIST. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3032 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 5/32", 3/16" and 1/4" TOTAL OF 3 EDM NOTCHES .040" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3032-1 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3147AL | 7 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.5" x 3/8" . HOLE SIZES: 5/32", 3/16", 7/32",1/4", 5/16",3/8", 7/16". TOTAL OF 7 EDM NOTCHES .030" +0.002"/-0.002" Long x .007" Max Width Through the Depth of the Countersin | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3166AL | CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0". Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3309AL | Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3430 | CUSTOM HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 5/32", 6/32", 13/64", 8/32", 17/64". 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3430-1 | CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th row | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-PSM-5 | The PSM-5 Panel is manufactured to Pratt-Whitney P/N TAM 146040 specifications. Smooth Type - the chrome plated strip of the second version is not grit blasted. Sherwin Incorporated is an authorized manufacturer of TAM 146040 panels. PSM-5 Panel proce... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AFNDT-PSM-5/S | The PSM-5 Panel is manufactured to Pratt-Whitney P/N TAM 146040 specifications. Smooth Type - the chrome plated strip of the second version is not grit blasted...Sherwin Incorporated is an authorized manufacturer of TAM 146040 panels...PSM-5 Panel pro... | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AGE-02720-401 | PLATES, SIMULATION -AIR / GROUND CONDI-TION GSE 016. | 10 | |
AH365-210 | MH-65C ROTOR HUB, SWASH PLATE APERTURE, ENGINE AREA COVER (set of 2) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AST4617 | CAMSHAFT SETTING PLATE KV6 ROV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AST4902 | Fiat 1.8 16v. Setting Plate Se | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ASTM E317-16 FIG 1 | ASTM E317-16 Test Block for Evaluation fo Horizontal and Vertical Linearity. Material: 1018 Steel, Nickel Plated for Corrosion Resistance. ASTM E317-16 FIG.1 Pages 3-4. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ASTM E317-16/FIG X1.1 | ASTM E317-16 Type RA Resolution Block. Material: 1018 Steel, Nickel Plated for Corrosion Resistance. ASTM E317-16 FIG. X1.1 Page 12. Includes Test Report and Certificate of Conformance. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT156A-31 | NAMEPLATE FOR AT156A | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT406A-9 | NAMEPLATE AT406AV | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT460-46H | NAME PLATE AT460B | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
AT856-20 | AT856 NAMEPLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI518BF | JIG DRILL NUT PLATE DW-688-281 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI518KD | NUT PLATE DRILL JIG NASM21060 | 1 | |
ATI518SP1158 | NUTPLATE JIG.344-.688-.189 40 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ATI518SP1164 | NUTPLATE JIG .281-.562-.279 40 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
B49001-36 | B767 APU CONVERTER PLATES TOOL | 1 | |
BAT3518-A | Nutplate Jig - Double Wing - Standard Spacing - #6 Screw - MADE IN THE USA! | 1 | |
BAT3518-G | Nutplate Jig - Single Wing - Standard Spacing - #6 Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT3518-NB | Nutplate Jig - Double Wing - Tight Spacing - #6 Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT3518-PB | Nutplate Jig - Single Wing - Tight Spacing - #6 Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT3518-R | Nutplate Jig - Corner Style - #6 Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BAT3518-SB | Nutplate Jig - Miniature Corner Style - #6 Screw | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
BHS6061-T6/C2 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
C0048 | C0048 PLATE-AILERON SPRING TAB CHECK(R.H.) (MV7627-5-35) | 1 | |
C36007-12 | BLANKING PLATE – STARTER DUCT (SPL-18640) | 5 | |
C36008-2 | SPL-18640 - BLANKING PLATES - STARTER AIR DUCT & PRECOOLER, CFM ENGINE SERIES | 5 | |
C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - ADAPTER PLATE LIFT ASSY, C44001-50 (INCLUDED IN C44001-55 KIT)/ C44001-60 (INCLUDED IN C44001-58 KIT) | 5 | |
C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - ADAPTER PLATE LIFT ASSY, C44001-50 (INCLUDED IN C44001-55 KIT)/ C44001-60 (INCLUDED IN C44001-58 KIT) | 3 | |
C44001-67 | REMOVAL/INSTALLATION EQUIPMENT - ADAPTER PLATE LIFT ASSY, C44001-50 (INCLUDED IN C44001-55 KIT)/ C44001-60 (INCLUDED IN C44001-58 KIT) | 3 | |
C71020-114 | SAE 4340 ALLOY STEEL BPLATE, AMS 6359 | 1 | |
C71020-117 | SAE 4340 ALLOY STEEL BPLATE, AMS 6359 | 1 | |
CG471-9 | STEP PLATE, 2-3/16-" | 1 | |
CMS671410 | GR30 ZINC PLATED PAILS 3/16IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
CMS671412 | GR30 ZINC PLATED PAILS 5/16IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
D61139 | LOCK PLATE, REF.AMM FIG.ITEM:35, AIPC REF.:32211603A-120 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
DCM1797 | ID PLATE G601R326101-5 G601R326106-5 G604-326101-5 G604-326102-5 | 1 | |
E202 | MOORE & WRIGHT ANGLE PLATE WEBBED END, 160X100X125 | 1 | |
E2J60661 | FILING FIXTURE FOR LOCK PLATES 4-6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
ELT TEMPLATE-1 | EDDY CURRENT CIRCLE TEMPLATE, 0.750"Ø. 3 HOLE SIZES: .749", .750",.751". MATERIAL: 2024-T351, 0.063" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ELT TEMPLATE-2 | EDDY CURRENT CIRCLE TEMPLATE, 0.201"Ø. 3 HOLE SIZES: .200", .201",.202". MATERIAL: 2024-T351, 0.063" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ELT TEMPLATE-3 | EDDY CURRENT CIRCLE TEMPLATE, SELECT RIVET SIZES. 12 HOLE SIZES: .125", .156",.187", .218", .250", .281", .312", .343", .375", .437", .500", .562". MATERIAL: 2024-T351, 0.063" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
ET.28 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70000-1-84 | CLAMP SIDE PLATE CFM56-3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70000-2-62-3 | STEEL END PLATE 3MM X 26MM X 26MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70010-81 REVA | CLAMP SIDE PLATE CFM56 -5 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
FB70077-1-81 | CLAMP SIDE PLATE CFM56-7 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
G54007-91 | MOUNT, BASE PLATE - (PW4056 AND JT9D-7R4 ENGINES) | 3 | |
G54007-93 | MOUNT, BASE PLATE - CF6-80C2 ENGINE | 6 | |
GS14616-1 | INSERTER, OIL SEAL PLATE 54H60 | 3 | |
GS22500-1 | Shipping Plate C01364 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
GSE55915-1304 | ALUM PLATE 6061-T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
H704-295NP | CHERRY RIVETLESS NUT PLATE PULLING HEAD 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HBM12X65 | HEX BOLT M12 X 65 LG ZINC PLATED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
HU82159-2 | SECTION TEMPLATES CONCAVE (PRESSURE) SIDE 36 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE 1M14146 | IAE 1M14146 SUPPORT PLATE | 3 | |
IAE 2F10368 | IAE 2F10368 PLATE, VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE1M14146 | SUPPORT PLATELHT Dwg No.(537250036) | 3 | |
IAE1P17523 | PLATE, BLANKOFF LHT Dwg No.(537200036) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
IAE2F10368 | IAE 2F10368 PLATE, VACUUM CHECK | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
J54001-74 | MOUNT, BASE PLATE - (CF6-80C2 AND CF6-80A ENGINES) | 4 | |
J54001-75 | MOUNT, BASE PLATE - (PW4056 AND JT9D-7R4 ENGINES) | 4 | |
JT15D/PW500/PW600 ENGINE LIFTI | JT15D/PW500/PW600 ENGINE LIFTING SLING W/ AFT PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
K55006-77 | FIXTURE PLATE ASSY6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KEY STOCK 3/16" | KEY STOCK 3/16" SQUARE ZINC PLATED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
KTC268C | DUPLICATOR, NUT-PLATE, 3/16 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L9300341-001 | SKIN PLATE, 2024-T351, 24"LONG, .869" THICK, 8" WIDE + SPAR PLATE, 7075-T7651, 24"LONG, .490" THICK, 8" WIDE *Customer supplies fasteners* | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L9300341-003 | SKIN PLATE, 2024-T351, 24"LONG, .869" THICK, 8" WIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
L9300341-005 | SPAR PLATE, 7075-T7651, 24"LONG, .490" THICK, 8" WIDE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LFA 120 S | PLASTIC JAW PLATE 126, ECKOLD KRAFT FORMER | 1 | |
LFA 70 S | PLASTIC JAW PLATE 76, ECKOLD KRAFT FORMER | 2 | |
LFA 90 S | PLASTIC JAW PLATE 96, ECKOLD KRAFT FORMER | 1 | |
LFR 70 S | PLASTIC JAW PLATE 006.330.6000, ECKOLD KRAFT FORMER | 1 | |
LFS 60 S | PLASTIC JAW PLATE 60, ECKOLD KRAFT FORMER | 1 | |
LIL71640 | GM 5.3L/6.2L DRILL PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL72400 | MAIFOLD TEMPLATE GM 6.6L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL72430 | M 6.6L DRILL PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL72450 | MANIFOLD TEMPLATE FORD 6.2L | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LIL72460 | FORD 6.2L DRILL PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
LST70776 | ADJUSTABLE BACK PLATE PT06608M | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
M46214-1000 | ADJUSTMENT TOOL WITH THE TEMPLATES (M46214-1, S47789 AND S47790) | 9 | |
MS20392-6C27 | CLEVIS PIN 7/16 DIA. X 27/32 LG CADMIUM PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NAS1307-30 | HEX BOLT 7/16-20 X 2.469 LG ALLOY CADMIUM PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NAS6606-8 | HEX BOLT 3/8-24 X 1 5/64 ALLOY CADMIUM PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NAS6608-28 | HEX BOLT 1/2-20 X 2 31/64 ALLOY CADMIUM PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1087-11 | BOEING REFERENCE STANDARD, 757 PART 6 53-00-11. PLATE THICKNESS: UPPER 1 - 0.140 / LOWER 2 - 0.080. MATERIAL: 2024-T3. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 2 | |
NDT1087-12 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.120 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
NDT1087-13 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
NDT1087-14 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.160 / Lower 2 - 0.100. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
NDT1094-040A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .040" bottom plate | 2 | |
NDT1094-050A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .050" BOTTOM PLATE | 2 | |
NDT1094-070A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .070" bottom plate | 2 | |
NDT1094-090A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .090" bottom plate | 2 | |
NDT1094-110A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .110" bottom plate | 2 | |
NDT1094-130A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .130" BOTTOM PLATE | 2 | |
NDT1094-155A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .155" bottom plate | 2 | |
NDT1094-185A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .185" bottom plate | 2 | |
NDT1094-215A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .215" bottom plate | 2 | |
NDT1094-245A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .245" bottom plate | 2 | |
NDT1094-275A | BOEING STANDARD, 737/747 PT4 53-30-06:PG25 FIG2, .072" TOP PLATE .275" BOTTOM PLATE | 1 | |
NDT1094-300A | Boeing Standard, 737/747 PT4 53-30-06:PG25 FIG2, .072" top plate .300" bottom plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NDT3114 | STANDARD, BONDED TEST COUPONS, .032 THICK COUPONS OVER .036 BOTTOM PLATE | 1 | |
NDT6025-1 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
NDT6025-2 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
NDT6025-3 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
NDT6025-4 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
NDT6025-5 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
NDT6025-6 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. MATERIAL: 400 STAINLESS STEEL. 3 PLATE ASSEMBLY MEASURING 4" X 7" X .875", CONTAINS 20 FASTENER HOLES WITH DIAMETERS RANGING FROM .156" – .750"., 71 EDM NOTCHES IN VARIOUS LOCATIONS (NOTCH DEPTH & LENGTHS VARY), WIDTHS FOR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PACKBACKPLT6 | BACKING PLATE 6IN | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PUL0806 | 6IN PUL PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA101801 | TEMPLATE - MARKING, BLADE 56A621 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA25226 | PLATE - AGB SFT & BRG DISASSY_[PWA25226] | 2 | |
PWA25366 | PLATE - IMC G/B DRIVE G/SHAFT BALL BRG_[PWA25366] | 2 | |
PWA26120 | PLATE_[PWA26120] | 2 | |
PWA26189 | HOLDER - IMC NO.2 BRG SEAL PLATE NUT_[PWA26189] | 2 | |
PWA26206 | ADAPTER, PLATE - HPC FRT HUB CLAMP_[PWA26206] | 1 | |
PWA26243A | PLATE - HPC, RUNOUT BUILD CHUCK CENTL_[PWA26243A] | 1 | |
PWA26289 | PLATE_[PWA26289] | 2 | |
PWA26392 | PLATE - MGB O/P G/SFT BRG REMOVAL_[PWA26392] | 2 | |
PWA26422 | TEMPLATE - HPT 2ND STAGE NOTCH GRIND_[PWA26422] | 1 | |
PWA26512 | PLATE - MGB TACH DR,ROLLER BRG REM_[PWA26512] | 2 | |
PWA26934 | PLATE - PRESS TEST IMC,FRONT_[PWA26934] | 2 | |
PWA29143 | PLATE,DEGREE - 3.0 BLEED V/V ACTUATOR_76X76X50MM/0.4KG_[PWA29143] | 2 | |
PWA29936 | PLATE_[PWA29936] | 2 | |
PWA29986A | PLATE_[PWA29986A] | 1 | |
PWA49065 | TEMPLATE - PLASTIC CHORD, (PN 53A321, 54A821 AND 56A511 BLADE) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWA86053 | TEMPLATE - MARKING, BLADE 56A821 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
PWC38268 | TEMPLATE VEDI TOOL P/N 98S76000004000 | 10 | |
PWC56007 | TEMPLATE INSPECTION PWC56007 | 1 | |
RB429WA-CMM-62-36-16-9 | Swashplate and Support Assembly Work Aid #16 | 1 | |
RB429WA-CMM-62-36-26-12 | Swashplate and Support Assembly Work Aid #26 | 1 | |
RB429WA-CMM-62-36-6-5 | Swashplate and Support Assembly Work Aid #6 | 1 | |
RBT400206 | Hoisting Plate (206-240-001-101) | 1 | |
RCH3-T20-6AL4V | 3 hole countersink standard 7/32, 1/4, 9/32, .500 thick plate .020 deep notches on the CS and inside the hole, 6AL4V | 1 | |
RH18.75-T20-7075T6 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 +/- .002 thru notches .004 +/- .002 wide notches, 7075-T6 Aluminum .75" thick plate | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RH240-C30M20T20-7075T6 | 24 hole calibration standard, 3/4" - 1 1/2" holes. 030" corner notches, .020 midwall notch, .020" thru-wall, 3 plate stack, 7075T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RH3-C30-6AL4V | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030x.030 corner notch..6AL4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RH3-T30-7075T6 | 3 hole standard .875,1.0 and 1.125 inch holes .250 thick plate .030 thru notch..7075T6 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RM20M12D28 | Souriau, Size 16 Crimp Pin Contact, for 22-20 AWG Wire, Gold Plated, Allied p/n 678-0234 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RRT026349-001 | LOCATION RING - STAGE 6 CLAMP PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
RT6-20MM-1018-.5/3MM | 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 1018 Carbon steel (Nickel Plated) | 1 | |
S1824005036 | .036 FIXED PLATE ADAPTER 1/4DR | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S40-100-50-8 | Nut Plate Drill Bits ( Body & Countersink Diameter: .250" )( Drill Diameter: .0980" )( Tip Length: 0.560" )( Type: H.S.S. ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
S40-100-50-8C | Nut Plate Drill Bits ( Body & Countersink Diameter: .250" )( Drill Diameter: .0980" )( Tip Length: 0.560" )( Type: Cobalt ) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SHCSM6X60FT | SHCS M6X60 LG FULL TREATED NONE PLATED | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SP5/64X7/8-SZ | SPRING PIN 5/64 X 7/8 STEEL ZINC PLATE | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SRT10S25M6N | 1HP ROUTER 25K TEMPLATE 6MM | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
SWE-846380 | SWE-846380 - BASE PLATE ASSEMBLY. | 3 | |
Stackable Standard | Set of 4 standards, 2024T3 Plates, 0.040", 0.063", 0.068", 0.071", 0.100" | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
Surfix Pro Paint Meter | Surfix Pro Paint Meter - Thickness gauge for varnish, paint & electroplated coatings, Measuring range: up to 3500 μm /140 mils, Up to 60 hours battery life | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
T-4148-2 | PLATES FOR TOOL GS25565-1 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK-186-2024T3-12 | 12 Hole Reference Standard Similar to Boeing 186, 3/16" to 3/4", with .030" corner and .020" corner notches on the bottom plate, .040 Long x .020 Deep Midwall Notches on the top plate. 2024-T3 | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK-6200-A | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to Fay, .030" corner in top plate, 7075T6 Aluminum | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TEK-6200-T | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to fay, .030" corner in top plate, T6AL4V | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. | |
TSF5T-52001-26 | BLOCK OFF PLATE (WAS NOTED AS A -16, SCARS ASSOCIATES NOMENCLATURE WITH -26) | RQST*We do not currently have a manufacturing solution for this item but will do our best to source it. |
RQST*: We do not currently have a manufacturing solution for this item but will do our best to source it.
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.