| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| T6-010 | CANOPY COVER with 40" fwd ext (single piece back glass) | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) T60-1001-C8 | CABLE TENSIOMETER | 2 | ||
| (CALIB) T60-1001C8-1A | CABLE TENSIOMETER | 1 | ||
| (CALIB) T60-1001C9-1A | TENSIOMETRE (CALIBRATION) | 1 | ||
| AST6010UK | OXY SENS REM/INST | 1 | ||
| AT6010A | 10MM BELT SANDER | 1 | ||
| AT6010A-1 | MOTOR HOUSING | 1 | ||
| AT6010A-10 | SPACER | 1 | ||
| AT6010A-11 | RETAINING RING | 1 | ||
| AT6010A-12 | SPACER | 1 | ||
| AT6010A-13 | BALL BEARING | 1 | ||
| AT6010A-14 | REAR END PLATE | 1 | ||
| AT6010A-15 | ROTOR | 1 | ||
| AT6010A-16 | ROTOR BLADE | 1 | ||
| AT6010A-17 | KEY (3X3X10) | 1 | ||
| AT6010A-18 | CYLINDER | 1 | ||
| AT6010A-19 | FRONT END PLATE | 1 | ||
| AT6010A-2 | GUARD | 1 | ||
| AT6010A-20 | BALL BEARING | 1 | ||
| AT6010A-21 | CAP | 1 | ||
| AT6010A-22 | DRIVE PULLEY | 1 | ||
| AT6010A-23 | HEXAGON NUT | 1 | ||
| AT6010A-24 | SHOE | 1 | ||
| AT6010A-25 | BOLT | 1 | ||
| AT6010A-26 | DUST COVER | 1 | ||
| AT6010A-27 | SCREW | 1 | ||
| AT6010A-28 | EXHAUST SHAFT | 1 | ||
| AT6010A-29 | SCREW (M4 X 8) | 1 | ||
| AT6010A-3 | AIR INLET | 1 | ||
| AT6010A-30 | SCREW (M3 X 8) | 1 | ||
| AT6010A-31 | SPRING PIN | 1 | ||
| AT6010A-32 | SCREW | 1 | ||
| AT6010A-33 | BALL BEARING | 1 | ||
| AT6010A-34 | IDLE PULLEY SHAFT | 1 | ||
| AT6010A-35 | SPRING | 1 | ||
| AT6010A-36 | TENSION BAR | 1 | ||
| AT6010A-37 | BUSHING | 1 | ||
| AT6010A-38 | IDLE PULLEY | 1 | ||
| AT6010A-39 | SPRING | 1 | ||
| AT6010A-4 | THROTTLE LEVER | 1 | ||
| AT6010A-40 | BRACKET | 1 | ||
| AT6010A-41 | SCREW | 1 | ||
| AT6010A-42 | SPRING PIN | 1 | ||
| AT6010A-43 | SPRING | 1 | ||
| AT6010A-44 | SAFETY LEVER | 1 | ||
| AT6010A-45 | PIN | 1 | ||
| AT6010A-46 | GRIP | 1 | ||
| AT6010A-47 | SAFETY BAR | 1 | ||
| AT6010A-48 | SPRING | 1 | ||
| AT6010A-49 | SPRING PIN | 1 | ||
| AT6010A-5 | VALVE STEM | 1 | ||
| AT6010A-50 | O-RING | 1 | ||
| AT6010A-51 | SCREW | 1 | ||
| AT6010A-52 | PIN (2 X 13.8) | 1 | ||
| AT6010A-53 | HEX KEY WRENCH (4MM) | 1 | ||
| AT6010A-54 | SCREW (M4X8L) | 1 | ||
| AT6010A-55 | SPRING WASHER | 1 | ||
| AT6010A-56 | NUT | 1 | ||
| AT6010A-57 | LEVER SUPPORT | 1 | ||
| AT6010A-58 | O-RING | 1 | ||
| AT6010A-59 | O-RING | 1 | ||
| AT6010A-6 | VALVE | 1 | ||
| AT6010A-60 | MUFFLER | 1 | ||
| AT6010A-61 | EXHAUST SLEEVE | 1 | ||
| AT6010A-7 | O-RING | 1 | ||
| AT6010A-8 | SPRING | 1 | ||
| AT6010A-9 | O-RING (14.5 X 5) | 1 | ||
| DAC ETBS AL-1T 7075-T6 0.100 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1 | 1 | ||
| ENET6010L | GAUGE | 1 | ||
| LT-6010 | Test panel harness / cable for COLLINS | 1 | ||
| MOD.T60-1001-C8-1A | TOOL | 1 | ||
| NDT6010 | BOEING REFERENCE STANDARD 767 Part 4 52-30-02 Page 5 Figure 2. Material: 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | ||
| PTT60102 | BRIGHT STAR FLASHLIGHT | 1 | ||
| RT10-7075T6-010-100 | 10 STEP WEDGE, .010 TO .100 /- .001, 70 | 1 | ||
| RT11-7075T6-.010/.110 | 11 Step Wedge, .010" to .110 x .010", 1" x 1" pads, 7075-T6, .001" tolerance | 1 | ||
| RT5-7075T6-.010/.050-.010 | 5 Step Wedge, .010" to .050" x .010", 5" x 1" pads, 7075T6 Aluminum | 1 | ||
| T60 1001-C8-1A | TENSIOMETER | 27 | View Images / Tech Appraisal | |
| T60-1001 | TENSION CABLE METER | 1 | ||
| T60-1001-08-1A | CABLE TENSIOMETER | 1 | ||
| T60-1001-1A | TENSIOMETER- 10-200 LBS | 1 | ||
| T60-1001-C8-0A | DIAL INDICATOR TENSIOMETER | 1 | ||
| T60-1001-C8-1 | CABLE TENSIOMETER | 1 | ||
| T60-1001-C8-11 | TENSIOMETER (0 – 100 LBS) | 1 | ||
| T60-1001-C9-00 | TENSIOMETRE 100-450 | 1 | ||
| T60-1001C8-00 | TENSIOMETER | 1 | ||
| T60-1001C9 | TENSIONMETER | 1 | ||
| T60-1002-C8-00 | TENSIOMETER | 2 | ||
| T60-1002-C9-00 | TENSIOMETER | 2 | ||
| T601001-C8 | TENSIOMETER | 3 | ||
| T601001C61A | TYPE C TENSI | 1 | ||
| T601001C91A | CABLE W/CERT. CALIBRATION | 11 | ||
| T6010L | GAUGE 40000PSI | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
