| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9001-1 | PLUG | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) C79001-1 | PRESSURE GAUGE (CALIBRATION) | 1 | ||
| (CALIB) K29001-1 | Adapter Eqpt - EMP R/I (CALIBRATION) (CALIBRATION) | 1 | ||
| 01-1229-0011-10 | KIT: OPTION,3IN ID EYEBOLT, | 1 | ||
| 01−1229−0011 | Assembly − Tow Bar and Tow Head | 4 | ||
| 01190011 | Crowring spanner 1/4" 11mm L.28mm | 1 | ||
| 01A1229-0011 | Towbar, Custom Canadair Rj (Ce | 1 | ||
| 0T900-1181 | TOOL | 1 | ||
| 0T900-1181/1182 | TEST FIXTURE P/N.0T900-1181/1182 | 1 | ||
| 0T900-1182 | TEST FIXTURE | 1 | ||
| 1-1579001-1 | DIE SET SAP CABLE | 1 | ||
| 1190011 | 1/4DR x 11mm CROW RING SPANNER | 1 | ||
| 139-00-110-00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 139-00-111-00 | END CAP | 1 | ||
| 139-00-112-00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 139-00-115-00 | BAGGAGE BAR | 1 | ||
| 139-00-115-01 | BAGGAGE BAR 2226 | 1 | ||
| 139-00-117-06 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 139-00-117-13 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 139-00117-04 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 19289-0011 | Die Set (large) for the HHLS Hydraulic Crimper | 1 | ||
| 27A01T90011 | ELECTRICAL MANIFOLD | 1 | ||
| 28.00.9001.190.000 | PULLER FOR THE MAIN LANDING GEAR BEARING | 1 | ||
| 30-900-1101 | Sylvac 30-900-1101 Transducer Probe P2I Linear Measuring Range +/- 2mm/0.8" | 1 | ||
| 30-900-1102 | Sylvac 30-900-1102 Transducer Probe P2IP Linear Measuring Range +/- 2mm/0.8" | 1 | ||
| 30-900-1111 | Sylvac 30-900-1111 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | ||
| 30-900-1112 | Sylvac 30-900-1112 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | ||
| 32090.0111 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3909001-1003 | MODULE TEST BOX | 1 | ||
| 4-1579001-1 | ERGO DIE MCP 1;2 LL | 1 | ||
| 41861019001/10 | HELICOIL KIT UNF 4/48 ” UP TO UNF ¼”-28 | 1 | ||
| 5-1579001-1 | ERGO DIE MQS 0;5-0;75 | 1 | ||
| 50-590011 | WING BOLT NUT SPIN ON WRENCHES 3/4" INT. WRENCH | 1 | ||
| 63900-115 | BUSHING, MAIN GEAR AXLE | 1 | ||
| 657900 1-17 | 12 POINT BOX (RING) 9X12 INSERT TOOL 17MM | 1 | ||
| 690011366-001 | EHHDLU TO SSFDR DOWNLOAD CABLE | 1 | ||
| 7090-011 | CART, OXYGEN | 3 | ||
| 71190011 | Two arm puller 20-70mm | 1 | ||
| 77490011 | *OBSOLETE see 77490010* 13126-1- LED TORCH ZONE 1 | 1 | ||
| 79001199-1 | SEAL INSTALLATION TOOL | 1 | ||
| 9001-16 | 0-6000 PSI GAUGE | 1 | ||
| 9090-011 | 60 TON TAIL JACK REG | 1 | ||
| 9590011000 | EN-KIT LBY 216 BLEU 50428 (0,69+0,31KG) | 1 | ||
| 9590011400 | EN-KIT LRY 023 VERNIS INCOLORE 0,83+0,17 | 1 | ||
| 98A10003900113 | SQUARE-HEAD BOLT | 1 | ||
| 98A10003900114 | SLEEVE | 1 | ||
| 98D27309001160 | BUSHING | 1 | ||
| 98D36109001100 | TOOL | 1 | ||
| 98D36109001102 | TOOL | 1 | ||
| 98D36109001108 | ASSY HOSE ASSY 1 | 1 | ||
| 98D36109001112 | TOOL | 1 | ||
| 98D36109001114 | TOOL | 1 | ||
| 98D47009001114 | TOOL | 1 | ||
| 98D47009001118 | TOOL | 1 | ||
| 98D47009001120 | TOOL | 1 | ||
| 98D47009001140 | Blanking plug vent pipe shrouds connection | 1 | ||
| 98D47009001148 | Blanking plug | 1 | ||
| 98D47209001100 | Digital manometer | 1 | ||
| 98D472090011000 | TOOL | 1 | ||
| 98D47209001102 | STORAGE BOX | 1 | ||
| 98D47209001104 | HOSE | 1 | ||
| 98D47209001106 | HOSE | 1 | ||
| 98D47209001108 | PLUG NEA LINE | 1 | ||
| 98D47209001110 | PLUG NEA LINE | 1 | ||
| 98D47209001112 | CAP NEA LINE | 1 | ||
| 98D47209001114 | CAP NEA LINE | 1 | ||
| 98D47209001116 | DRAIN PORT ADAPTER | 1 | ||
| 98D47209001118 | DRAIN PORT ADAPTER | 1 | ||
| 98D47209001120 | DFCV PNEUMATIC TEST PORT ADAPTER | 3 | ||
| 98D47209001122 | DFCV INLET PORT ADAPTER | 1 | ||
| 98D47209001124 | DFCV INLET PORT ADAPTER | 1 | ||
| 98D55109001100 | Removing set size 5 | 1 | ||
| 98D55109001102 | Installing set size 5 | 1 | ||
| 98D55109001104 | TOOL | 1 | ||
| 98D55109001110 | Removing set size 8 | 1 | ||
| 98D55109001112 | Installing set size 8 | 1 | ||
| 98D55109001114 | Crimping set size 08 | 1 | ||
| 98L10109001100 | COVER ASSY | 1 | ||
| 98L32109001100 | GUIDE CONE SET | 1 | ||
| 98L32109001102 | GUIDE CONE SET | 1 | ||
| 98L32109001104 | GUIDE CONE SET | 1 | ||
| 98L32109001106 | GUIDE CONE SET | 1 | ||
| 98L32109001108 | GUIDE CONE SET | 1 | ||
| 98L32109001110 | GUIDE CONE SET | 1 | ||
| 98L32109001112 | GUIDE CONE SET | 1 | ||
| 98L32109001114 | GUIDE CONE SET | 1 | ||
| 98L32109001116 | GUIDE CONE SET | 1 | ||
| 98L32109001118 | GUIDE CONE SET | 1 | ||
| A29001-1 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 6 | View Images / Tech Appraisal | |
| A29001-1-M | HOIST ADAPTER | 1 | ||
| A29001-11-CM | 0125"THK A36 | 1 | ||
| A29001-19 | HOIST ADAPTER - AIR-DRIVEN HYDRAULIC PUMP | 3 | ||
| A49001-1 | APU Support | 1 | ||
| A49001-106 | Plain Washer | 1 | ||
| A49001-108 | Lock Nut | 1 | ||
| A49001-111 | Hex Cap Screw | 1 | ||
| A49001-115 | TOOL | 1 | ||
| A49001-118 | TOOL | 1 | ||
| A49001-119 | TOOL | 1 | ||
| A49001-120 | TOOL | 1 | ||
| A49001-122 | L-PIN | 1 | ||
| A49001-123 | L-PIN | 1 | ||
| A49001-124 | POST ASSY | 1 | ||
| A49001-125 | HINGE FITTING | 1 | ||
| A49001-126 | POST | 1 | ||
| A49001-128 | Nut | 1 | ||
| A49001-129 | L-PIN | 1 | ||
| A49001-130 | PIN HANDLE | 1 | ||
| A49001-131 | ROD | 1 | ||
| A49001-132 | ROD | 1 | ||
| A49001-137 | CRADLE - APU | 6 | ||
| A49001-145 | Bolt | 1 | ||
| A49001-146 | Bolt | 1 | ||
| A49001-147 | Bolt Spacer | 1 | ||
| A49001-148 | Nut | 1 | ||
| A49001-149 | Nut | 1 | ||
| A49001-150 | Washer | 1 | ||
| A49001-151 | Washer | 1 | ||
| A49001-152 | PIN QUICK RELEASE | 1 | ||
| A49001-153 | Cable Assy | 1 | ||
| A49001-154 | Bolt | 1 | ||
| A49001-155 | Nut | 1 | ||
| A49001-156 | Lock Washer | 1 | ||
| A49001-157 | Washer | 1 | ||
| A49001-17 | CRADLE - AUXILIARY POWER UNIT (APU) | 4 | ||
| A490011-17 | TOOL | 1 | ||
| B29001-1 | Boeing | 1 | ||
| B29001-10 | SCREEN RETAINER | 1 | ||
| B29001-14 | RUB STRIP | 1 | ||
| B29001-19 | SUPPORT BASE | 1 | ||
| B49001-1 | FRAME - AUXILIARY POWER UNIT (APU) INSTALLATION AND REMOVAL | 13 | View Images / Tech Appraisal | |
| B49001-1-35 | FRAME AUXILIARY POWER UNIT APU INSTALLATION | 1 | ||
| B49001-1-M | MFD PARTS FOR -1 | 1 | ||
| B49001-10 | CLEVIS | 1 | ||
| B49001-11 | GUSSET | 1 | ||
| B49001-11-CM | 01875" THK A36 | 1 | ||
| B49001-11-F | GUSSET | 1 | ||
| B49001-12 | LIFT PLATE | 1 | ||
| B49001-12-F | LIFT PLATE | 1 | ||
| B49001-13 | TUBE | 1 | ||
| B49001-14 | TUBE | 1 | ||
| B49001-15 | TUBE | 1 | ||
| B49001-16 | TUBE | 1 | ||
| B49001-17 | LIFT PLATE | 1 | ||
| B49001-17-F | LIFT PLATE | 1 | ||
| B49001-18 | GUSSET | 1 | ||
| B49001-18-CM | 01875" THK A36 | 1 | ||
| B49001-18-F | GUSSET | 1 | ||
| B49001-19 | TUBE | 1 | ||
| B90-011 | CANOPY/NOSE COVER | 1 | ||
| C09001-1 | COUPLER ASSEMBLY - TOWBAR | 2 | ||
| C29001-1 | Cap - Sealing, Pressure Transmitter Mount | 1 | ||
| C49001-1 | KIT DELETION DISPATC | 9 | ||
| C49001-10 | SPACER | 1 | ||
| C49001-11 | TAPE | 1 | ||
| C49001-16 | CONNECTOR SHELL | 1 | ||
| C49001-18 | BRACKET | 1 | ||
| C49001-19 | ADPTER-SPLINE | 1 | ||
| C79001-1 | TEST EQUIP, - ENG, O | 14 | ||
| C79001-1-60 | GAUGE USG 60PSI | 1 | ||
| C79001-18 | TOOL | 1 | ||
| EECT900-11 | BRASS PROBE TIP 6IN LENGTH | 1 | ||
| EO13829.001/1 | Aeronautical Engineers Australia Reference Standard Fig.2 Page 5 DOC NO: MMS13829.001/1 and REF EO: EO13829.001/1 | 1 | ||
| F10A-5-P20900-11 | Rig tool | 1 | ||
| F900-115 | CENTER ENGINE EXHAUST COVER | 1 | ||
| G09001-1 | Boeing | 1 | ||
| G29001-1 | TEST ADAPTER - PRESSURE SWITCH, HYDRAULIC PUMP | 1 | ||
| GB900-113-061 | HYDRAULIC JACK | 1 | ||
| GB900-113-061-STDR 4/2/254 5120151956309 | HYDRAULIC JACK, LOAD 4000KG (5120151956309) | 1 | ||
| GMT4190-011 | ELECTRONIC CLOCK | 1 | ||
| H900-116 | PITOT COVERS WITH AOA STRAPS, heat resistant type (set of 2) | 1 | ||
| J09001-1 | TOW BAR 777 | 1 | ||
| J29001-1 | Screen , Rat Test | 1 | ||
| J49001-1 | Boeing | 1 | ||
| J49001-10 | Ballast - Fishpole | 1 | ||
| J49001-11 | HYDRO MFD PART -0 BODY | 1 | ||
| K09001-1 | Towbar Specification | 1 | ||
| K29001-1 | ADAPTER EQUIPMENT - ELECTRIC MOTOR PUMP REMOVAL/ INSTALLATION (CE) | 3 | ||
| K29001-10 | ADAPTER EQPT | 1 | ||
| K29001-11 | ADAPTER EQPT | 1 | ||
| K29001-12 | ADAPTER EQPT | 1 | ||
| K29001-13 | ADAPTER EQPT | 1 | ||
| K29001-14 | ADAPTER EQPT | 1 | ||
| K29001-15 | ADAPTER EQPT | 1 | ||
| K29001-16 | ADAPTER EQPT | 1 | ||
| K29001-17 | ADAPTER EQPT | 1 | ||
| K29001-18 | ADAPTER EQPT | 1 | ||
| K29001-19 | ADAPTER EQPT | 1 | ||
| K49001-1 | THREAD PROTECTOR | 1 | ||
| KCT1900-11/16 | 1-1/16IN CROWS FOOT | 1 | ||
| KCT1900-11/4 | 1-1/4 IN CROWS FOOT | 1 | ||
| KCT1900-11/8 | 1-1/8 CROWS FOOT | 1 | ||
| KCT1900-113/16 | 1-3/16IN CROWS FOOT | 1 | ||
| KCT1900-115/16 | 1-15/16IN CROWS FOOT | 1 | ||
| KL9001-10 | (PR) JAWS SIZE 0 | 1 | ||
| L29001-1 | Dispatch Kit - Engine Driven Hydraulic Pump | 1 | ||
| L79001-1 | OIL DIFF PX SWITCH ADAPTOR | 1 | ||
| LTILT1900-1-1/16 | 1-1/16IN CROWFOOT | 1 | ||
| LTILT1900-1-1/4 | 1-1/4IN CROWFOOT | 1 | ||
| LTILT1900-1-1/8 | 1-1/8IN CROWFOOT | 1 | ||
| MD900-110 | AFT UPPER DECK COVER (covers exhaust area only) | 1 | ||
| MT8090011 | ADAPTOR, OXY CHARGE | 2 | ||
| T900115-1 | CRIMPING TOOL | 1 | ||
| YZZ9001-17 | Rotor,File | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
