| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 6000-1 | ***DISCONTINUED ITEM - LIMITED QUANTITY AVAILABLE*** #40 Spring-Loaded Prick-Punch Style Hole Finder | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 1016000-1 | Coolant Service Cart (CSC) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 35M5M01160001 | ADJUSTTL SETTING TOOL-MICROSWITCH UNIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 6000-110 | RAMP TEST SET (TRANSPONDER TCAS DME) | 1 | ||
| (CALIB) 6000-110/2/3/T/S | IFR6000 | 1 | ||
| (CALIB) 6000-1100PT2 | IFR-6000 TRAN/DME RAMP TEST SET (CALIBRATION) | 2 | ||
| (CALIB) 6000133343 | MEASURING EQUIPMENT - BRAKE PEDAL(SINGLE PEDAL) (CALIBRATION) | 1 | ||
| (CALIB) CG9520006-0001 | BAR, DUMMY GIRT (CALIBRATION) (CALIBRATION) | 1 | ||
| 00.36360.0011 | BUSHING. (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 00.36360.0012 | SHEAR PIN “F” . (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 00.36360.0015 | BUSHING. (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 00.36360.0016 | SHEAR PIN “G” . (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 00.36360.0017 | BUSHING. (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 00.36360.0018 | BUSHING. (TOW BAR ATR 42/72 MODEL: J-TOWATR) | 1 | ||
| 01-0560-0010 | HEAD, FALCON 50/900 (CE) | 1 | ||
| 01-1106-0001 | TOWBAR, | 1 | ||
| 01083060-001 | Custom Elite Metal Finishing Calibration Standard. Material: 7050-T7451 Aluminum. Includes Certification Report and Certificate of Conformance. | 1 | ||
| 01580406000/10 | TANG BREAK-OFF TOOL | 1 | ||
| 020-960-001 | FUEL PROBE UNIT | 1 | ||
| 02160001-000 | READOUT INCLINOMETER | 1 | ||
| 05003460001 | 1000V 6.3MM TIP ELECT S/DRIVER | 1 | ||
| 059–001656–0001 | KIT, MEON TRIPOD | 1 | ||
| 060-0015-00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 061160001 | Schrader 6116 High Pressure Strut Coupler - 18 NPT Female - 3,000 PSIG | 2 | ||
| 08260001 | Bit 1/4" TQ1 L.25mm | 1 | ||
| 10-3106-0001 | RAM / RELAY ADAPTER MODULE | 1 | ||
| 10-4036-0001 | LAVATORY SERVICE UNIT (CE) | 5 | ||
| 10-4036-0001-A1 | SERVICING CART | 1 | ||
| 10-4036-0001A2 | SVC CART: LAVATORY, | 1 | ||
| 100-600-01 | DATATRAC 600 DATABUS ANALYZER - ARINC 429,629 | 1 | ||
| 1016000-1 | FILL DEVICE-FILL/DRAIN,SCS | 1 | ||
| 105-600011W1 | Check Device | 1 | ||
| 105-60001W2 | R.R Lifting Eye | 1 | ||
| 105-60001W4 | GUIDE SLEEVE | 1 | ||
| 1061260-001 | TOOL | 1 | ||
| 108046-0001 | TAPE WINDER | 1 | ||
| 109-3600-01-1 | ENGINE LIFTING TOOLS | 1 | ||
| 11260001_STAH | Ratchet, HY-LOK, Standard Handle, 4 7/16" | 1 | ||
| 116000-1-T13 | FIXTURE, AIRCRAFT MAINTENANCE | 1 | ||
| 120780160001 | TEST HARNESS | 1 | ||
| 12245-060-001 | CONTROL CABLE RIGGING TOOL | 2 | ||
| 126-000-10 | TOWBAR ASSY | 1 | ||
| 126-000-101 | TOW BAR, AIRCRAFT C130 | 1 | ||
| 1260001 | Moore & Wright Feeler Strip 10 Piece, 0.001", 12" | 1 | ||
| 12600015 | Moore & Wright Feeler Strip 10 Piece, 0.0015", 12" | 1 | ||
| 14W1060001 | COVER - ENGINE AIR INLET | 2 | ||
| 16010160001 | EYE BOLT DIN580 M16 STEEL ZINC | 1 | ||
| 16110160001 | LIFTING EYE NUT M16 STEEL ZINC | 1 | ||
| 1660-001-110 | CASE PELICAN | 1 | ||
| 16813060001 | SHACKLE ¿6mm | 1 | ||
| 16916000.11V | 2DOOR/4SHELF CAB 1000x750x350 | 1 | ||
| 17G760001-1 | FIXTURE AIRCRAFT MAINTENANCE | 1 | ||
| 20056-0001 | COMPUTER | 1 | ||
| 20203600015001 | CRIMP TOOL | 1 | ||
| 206-000-101 | DOLLY ASSY, WHEEL REMOVAL AND INSTL | 1 | ||
| 212-92036-0001 | Ki reglaje control Vuelo | 1 | ||
| 212-92126-0001 | Barra de dirección del tren auxiliar en tierra | 1 | ||
| 212-93016-0001 | Util de compresion de amortiguadores C-212 | 1 | ||
| 212-A1946-0001 | sonda | 1 | ||
| 221A5600-010-001WF-1 | Weld fixture | 1 | ||
| 222-00386-0001 | SOFTWARE-TCAS FIELD DIAGNOSTIC PROGRAM | 1 | ||
| 228A2100-360-001WF-1 | Weld fixture | 1 | ||
| 23660-001 | TOOL | 1 | ||
| 2370-T160-001 | AXLE,SPLINED, UNLKG,GSE | 3 | ||
| 2608600017 | 4"GRINDING DISC | 1 | ||
| 261-156-000-101 | TEST UNIT | 1 | ||
| 3005A0600-01 | SEAL-INSTALLATION TOOL | 1 | ||
| 305-0560-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3066-0001 | SEAL FORMING MANDREL | 1 | ||
| 31160001 | (*disc *OBSOLETE see 31170000) 3116/1-IMPACT ADAPTOR 1/4"-1/4" | 1 | ||
| 32160001 | (*disc *OBSOLETE see 31180000) 3216/1-IMPACT ADAPTOR 3/8"-1/4" PLUG | 1 | ||
| 33160001 | 1/2" ADAPTOR TO 1/4 HEX BIT | 1 | ||
| 336-000-1R | GYRO, | 1 | ||
| 34600017 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 347-6000-1GSE | ENGINE MOUNT CART | 1 | ||
| 35-91036-0001 | NOSE LANDING GEAR GROUND LOCK | 1 | ||
| 35-92026-0001 | PIN | 1 | ||
| 35-92106-0001 | STANDARD TOOLS KIT | 1 | ||
| 35-92116-0001 | AILERON LOCKING | 1 | ||
| 35-92126-0001 | OXYGEN CHARGING ADAPTER | 1 | ||
| 35-92166-0001 | calibre aleron L/H | 1 | ||
| 35-92176-0001 | Calibre | 1 | ||
| 35-92236-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | ||
| 35-92286-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | ||
| 35-93346-0001 | DRILL HOLES TEMPLATE TOOL | 1 | ||
| 35-93956-0001 | TROLLEY OUTER WING AND CENTER WING LEADING EDGE LH/RH | 1 | ||
| 35M5M01160001 | SETTING TOOL-MICROSWITCH UNIT | 2 | View Images / Tech Appraisal | |
| 360001 | XP40 Air Screwdriver (1/4 F/Hex) | 1 | ||
| 36200.060.001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 38076-00017-002 | KIT STAB HNG RP | 1 | ||
| 383-200600-01 | 5-PORT PRESSURE MANIFOLD | 1 | ||
| 383-202600-01 | PRESSURE MANIFOLD | 1 | ||
| 39660060001 | GOUPILLE FENDUE A RESSORT (LYNCH PIN) M6 X 40 STEEL ZINC | 1 | ||
| 40194-T600-01 | TEST FIXTURE | 1 | ||
| 41851766000/10 | 5/16 | 1 | ||
| 4260001 | STRAP WRENCH | 1 | ||
| 429BF-6000-1 | REAR ASSY | 1 | ||
| 460001163 | TOOL | 1 | ||
| 460001335 | EXRTACTOR | 1 | ||
| 460001355 | EXTRACTOR | 8 | ||
| 460001361 | PLUG BLANKING | 1 | ||
| 46000151-16 | EXTRACTOR | 1 | ||
| 460001682 | SPANNER | 1 | ||
| 460001682-23 | TUBE SPANNER | 1 | ||
| 460001682-36 | SPANNER - GLANDSEAL TUBE MLG (MV7632-5-09) | 1 | ||
| 460001682-39 | SPANNER TUBE | 1 | ||
| 460001682-74 | SPANNER, RING NUT | 1 | ||
| 460001682-81 | ADAP. TORQUE WHEEL SPEED | 1 | ||
| 460001682-82 | TUBE SPANNER | 1 | ||
| 460001682-84 | TUBE SPANNER | 6 | ||
| 460001682-84PM | TUBE SPANNER | 1 | ||
| 460001682-89 | TUBE SPANNER | 1 | ||
| 46000168275 | SPANNER NOSE-GEAR VALVE RETAINING PLUG | 1 | ||
| 460001775 | HOLDING BLOCKS | 1 | ||
| 460001775-1 | HOLDING BLOCKS | 1 | ||
| 460001775-2 | HOLDING BLOCKS | 1 | ||
| 460001775-3 | HOLDING BLOCKS | 1 | ||
| 460001775-4 | HOLDING BLOCKS | 1 | ||
| 460001775-5 | HOLDING BLOCK | 6 | ||
| 460001775-5PM | HOLDING BLOCK | 1 | ||
| 460001775-6 | HOLDING BLOCKS | 1 | ||
| 460001775-7 | HOLDING BLOCKS | 1 | ||
| 460001775-8 | HOLDING BLOCKS | 1 | ||
| 460001794 | PRESSURE TEST BUNG | 1 | ||
| 460001794-1 | PRESSURE TEST BUNG | 1 | ||
| 460001794-10 | PRESSURE TEST BUNG | 1 | ||
| 460001794-11 | PRESSURE TEST BUNG | 1 | ||
| 460001794-12 | PRESSURE TEST BUNG | 1 | ||
| 460001794-13 | PRESSURE TEST BUNG | 1 | ||
| 460001794-14 | PRESSURE TEST BUNG | 1 | ||
| 460001794-15 | PRESSURE TEST BUNG | 1 | ||
| 460001794-16 | PRESSURE TEST BUNG | 1 | ||
| 460001794-17 | PRESSURE TEST BUNG | 1 | ||
| 460001794-18 | PRESSURE TEST BUNG | 1 | ||
| 460001794-2 | PRESSURE TEST BUNG | 1 | ||
| 460001794-3 | PRESSURE TEST BUNG | 1 | ||
| 460001794-4 | PRESSURE TEST BUNG | 1 | ||
| 460001794-5 | PRESSURE TEST BUNG | 1 | ||
| 460001794-6 | PRESSURE TEST BUNG | 4 | ||
| 460001794-6PM | PRESSURE TEST BUNG | 1 | ||
| 460001794-7 | PRESSURE TEST BUNG | 1 | ||
| 460001794-8 | PRESSURE TEST BUNG | 1 | ||
| 460001794-9 | PRESSURE TEST BUNG | 1 | ||
| 460001796 | TEST ADAPTOR | 1 | ||
| 460001796-4 | TEST ADAPTER | 1 | ||
| 460001805 | TEST ADAPTOR | 1 | ||
| 460001805-5 | TEST ADAPTOR | 4 | ||
| 460001995 | SUPPORT FIXTURE | 1 | ||
| 460001996 | RETAINING PLUG | 1 | ||
| 460001997 | PRESS PAD | 1 | ||
| 460001998 | BASE SUPPORT AND PRESS PAD | 1 | ||
| 4716-16000-15-101 | MAINTENANCE ACCESS CABLE | 1 | ||
| 5-6000-179 | OXYEGENT NITROGEN CART | 1 | ||
| 5-6000-180 | FEDEX GSE BOTTLE RACK | 1 | ||
| 526060001 | HACKSAW FRAME | 1 | ||
| 53377A2600-01 | INSTALLATION FRAME | 1 | ||
| 54-860-001 | FOWLER Heavy Duty Digital Micrometer | 1 | ||
| 57096-0001 | SEAL FORMING MANDREL | 1 | ||
| 57736-0001 | WRENCH, 16-POINT | 1 | ||
| 57736-0001 1 | WRENCH, 16-POINT | 1 | ||
| 57949A0600-01 | SUPPORT PILLAR, UPPER HALF | 1 | ||
| 579A0600-01 | Support Pillar, Upper Half | 1 | ||
| 59106-0001 | MANDREL | 1 | ||
| 600-010 | MAIN BODY COVER | 1 | ||
| 600-0101-1/4 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 600-0116-000 | CONTACT REMOVAL TOOL | 1 | ||
| 600-013-000 | CONTACT INSERTION TOOL | 1 | ||
| 600-015-1/4 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 6000-100 | Laversab Pitot Static Tester / Reader | 1 | ||
| 6000-110 | A/C/S & DME RAMP TEST SET | 2 | ||
| 6000-110 IFR | RAMP TEST SET | 1 | ||
| 6000-110-C | IFR 6000 RAMP TEST SET | 1 | ||
| 6000-1100PT2 | SIMULATOR TEST | 1 | ||
| 6000-15 | HAND OPERATED HOIST 750 LBS | 1 | ||
| 6000-1562-16GG/D-165 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 60001005 | CLECO RIVET CUTTER PLIERS 60001005 | 1 | ||
| 6000109 | PINCE A SERTIR | 1 | ||
| 600013 | PRESSURE GAUGE KIT | 1 | ||
| 6260A0600-01 | GUIDE - STEERING ACTUATOR PIN | 1 | ||
| 6260A6600-01 | EXTRACTOR, LOCKING RING | 1 | ||
| 6263A2600-01 | MLG LOCKING RING REMOVAL TOOL | 1 | ||
| 6263A6600-01 | MLG WHEEL AXLE PROTECTOR | 1 | ||
| 628-8660-001 | CONNECTOR KIT | 1 | ||
| 6280A0600-01 | 781 REMOVAL & INSTILLATION TOOLS KIT | 1 | ||
| 636-0001-4 | COVER-AIR INTAKE | 1 | ||
| 636-0001-4GSE | INLET COWL LIP COVER | 2 | ||
| 64060-001 | HEADSET | 1 | ||
| 660001 | GAGE (MS3197-22X1) | 1 | ||
| 660001014100 | BINDER CRIMP TOOL | 1 | ||
| 666000143 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 67600014-1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 69760001 | Replacement jaws for pliers no 6576 2pcs | 1 | ||
| 704-2260-001 | CABLE ASSY | 1 | ||
| 704A46860001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 72260001 | Spot weld milling cutter D.10mm | 1 | ||
| 72P5760001N001HOE | AILERON HOIST | 1 | ||
| 74060001 | Mechanics stethoscope | 1 | ||
| 74160001 | Spark plug brush L.150mm | 1 | ||
| 77460001 | Steel ruler L.300mm | 2 | ||
| 79060001 | File blade for 10905,10923 fine | 1 | ||
| 79160001 | Hand protector for chisel no. 110 | 1 | ||
| 79260001 | Spare milling cutter for no. 12727 | 1 | ||
| 8060-001-110 | PELICAN 8060 LED FLASHLIGHT | 1 | ||
| 810A0600-01 | Valve Assy Bypass | 1 | ||
| 822-0360-001 | EFIS ADAPTER | 1 | ||
| 8260001 | SCREWDRIVER BIT | 1 | ||
| 832-3560-001 | TERMINAL EMULATION SOFTWARE | 1 | ||
| 846-906-000-1 | Storage trolley | 1 | ||
| 8600010 | OIL FILLER ADAPTER PIPE | 1 | ||
| 8960001 | FLAMABLE CABINET | 1 | ||
| 95-92016-0001 | Cover, N.L.G. Wheel | 1 | ||
| 95-92116-0001 | Dolly, LH/RH Horizontal Stabilizer | 1 | ||
| 95-92126-0001 | HARNESS | 1 | ||
| 95-92236-0001 | ADAPTER, JACKING REAR FUSELAGE (RH) | 1 | ||
| 95-92246-0001 | ADAPTER, RH JACKING REAR FUSELAGE | 1 | ||
| 95-92266-0001 | REAR DOOR ACCESS STAIR | 1 | ||
| 95-92306-0001 | Rigging Kit AOA Transmitter | 1 | ||
| 95-93016-0001 | RIGGING GAGE OF THE RTCS | 1 | ||
| 95-93056-0001 | Tool | 1 | ||
| 9743160001 | BALL | 1 | ||
| 97S06000140000 | TOOL | 1 | ||
| 9879960001 | JFM 9879960001 Superseder III Control Switch Board | 1 | ||
| 98A76000100000 | PWA ENGINE IDLER CRANK RIGGING PIN | 1 | ||
| 98D27504006000-101 | FLAP RIGGING PIN QUOTE 98D2750400600 | 1 | ||
| 98F32001006000-1 | TOOL | 1 | ||
| 98L26208460001 | DEVICE - REMOVAL INSTALLATION, CC FIRE EXTING. BOTTLE | 1 | ||
| 98L57508760001 | WRENCH ADAPTER | 2 | ||
| 98V27508860001 | Rig Tool Drop Panel | 1 | ||
| 999-6000-1GSE | ENGINE MOUNT CART | 1 | ||
| A-960-001 | Magic T to horn-channel | 1 | ||
| A20060-0015 | AIR VALVE WITH HOSE | 1 | ||
| A301-460-001 | POWER SUPPLY UNIT ((FOR P/N: D717-02-001)) | 2 | ||
| A330-92026-0001 | Roll-Pitch, Spring actuator Jack, R/I Equipment | 1 | ||
| A330-92036-0001 | BULK CARGO DOOR LOCKING DEVICE | 1 | ||
| A330-92046-0001 | ERAS LOCKING TOOL | 1 | ||
| A330-92396-0001 | POD REAR FAIRING SUPPORT WEDGE ASSEMBLY | 1 | ||
| A330-92406-0001 | SET TORQUE WRENCHES | 1 | ||
| A330-92606-0001 | PROTECTOR REAR FAIRING POD | 1 | ||
| A560001-15 | TOOL | 1 | ||
| A579421360001-AT | CELL TORSION REAR CARRIAGE ALIGN. TOOL | 1 | ||
| AC21826000-1 | RIVETING TOOL | 5 | ||
| AC2186000-1 | RIVETING TOOL | 1 | ||
| AC6000176C240 | BELT-ASSY (RATCHET STRAP) | 1 | ||
| AEC060001000 | FUEL FILTER | 1 | ||
| AGE-02360-001 | ECCENTRIC SPHERICAL BEARING ADJUSTMENT DEVICE | 4 | ||
| AGE-02660-001 | BLOCK 2-ALUMINUM | 1 | ||
| ART-EAN-E2-3600-01 | BLEED AIR DUCT ALIGNMENT | 1 | ||
| ASI3360001 | CABLE | 1 | ||
| ASI6960001 | CABLE | 1 | ||
| B301-460-001 | TRI-STATE INTERFACE CONTROL BOX | 1 | ||
| B71025-91600/01 | C-DUCT SAFETY ROD | 1 | ||
| BK6000-1 | BK6000 LITHI | 1 | ||
| BK6000-10 | DO NOT SCRAP BATTERY CHARGER | 1 | ||
| BK6000-11 | EAR BUD AND MICROPHONE | 1 | ||
| BK6000-12 | USB CABLE | 1 | ||
| BK6000-13 | KICK STAND ASSEMBLY | 1 | ||
| BNM15600-01 | RAGHORN, FIXED BLADE, DROP POI | 1 | ||
| BS1453000560001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| BSLI5700360001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| C6000-10-32 | TOOL TOOL | 1 | ||
| CA38600-01.3 | TAPA | 1 | ||
| CG9000026-0001 | TOOL HSTAB BACKLASH | 1 | ||
| CG9000036-0001 | Mid? Avionic Boxes Removal Kit | 1 | ||
| CG9000056-0001 | Cover - Fuel Drain Mast | 1 | ||
| CG9000066-0001 | TOOL ASSY FIRE LOOP REMOVAL | 1 | ||
| CG9000086-0001 | BOOT STRAP TOOL KIT | 1 | ||
| CG9000096-0001 | KIT RIGGING PIN | 1 | ||
| CG9000106-0001 | KIT OUTER WING DRILLS | 1 | ||
| CG9275206-0001 | HOLDER ASSY NO FLAP TRACK | 1 | ||
| CG9281206-0001 | ACJ FUEL DRAIN TUBE REMOVAL | 1 | ||
| CG9520006-0001 | BAR DUMMY GIRT | 1 | ||
| CG9522106-0001 | PIN LOCK OWEED HANDLE | 1 | ||
| D274-00000-000L9600-01-00-102 | Rigging pins | 1 | ||
| D274-00000-000L9600-01-00-103 | Rigging pins | 1 | ||
| D27504113250W8600-01 | SCALE | 1 | ||
| D27603002101W8600-01 | GROOVE NUT WRENCH | 1 | ||
| D280-00005-000W8600-01A00 | Valve blank device | 1 | ||
| D321-04018-000L9600-01 | Setting tool-uplock | 1 | ||
| DAPT60-0010-00 | FIANGE ADOPTER | 1 | ||
| DAPT60-0015-00 | TORQUE ADAPTER | 1 | ||
| DAPT60-0019-00 | MANDREL-BUILD (HORIZONTAL, FIXED) | 4 | ||
| DAPT60-0019-00-IAS | MANDREL, BUILD, HORIZONTAL, FIXED Q400 | 1 | ||
| EGS6000-15-6260 | THIS IS NOT A TOOL | Not Available | Not Available | |
| EMB-00060-001 | Dolly | 1 | ||
| EP460-0016 | TOOL | 1 | ||
| F26676000-1 | TOOL | 1 | ||
| F27866000-1 | Cone adjuster pin | 1 | ||
| F28196000-1 | TOOL | 1 | ||
| F28266000-1 | TOOL | 1 | ||
| F523-08751-000W8600-01 | MDCD MANUAL OPERATION ROD | 1 | ||
| F551-82483-002W8600-01 | DUMMY COVER HAND HOLE HORIZONTAL STABILIZER | 1 | ||
| F572-56004-000W8600-01 | A330 DUMMY FUEL TANK CAP NACA VENTILATION | 1 | ||
| F78AE0260-001 | TROLLEY - EXHAUST FRONT PLUG | 1 | ||
| F78AE0260-001 REV B | FRONT PLUG TROLLEY | 1 | ||
| FMEQ02-141ND60001-001 | PASSENGER STAIR | 1 | ||
| FZ9-24-0-600-01 | NITROGEN PRESSURE GAUGE 1/4BSP FEMALE 600PSI | 1 | ||
| G-600-560001-1 | PRISM | 4 | ||
| G1002760001 | GSE, SPOILER BLOCKS | 3 | ||
| G1002760001-023 | BLOCKS, SPOILER, GSE | 4 | ||
| G1004500060-001 | Pmat Laptop | 1 | ||
| G116-00-0132 | MACHINE FIXTURE (HEAT SHIELD) | 1 | ||
| G600-360001-37 | Kit - Shop Air Adapter | 1 | ||
| G600-360001-41 | AIR START COUPLING | 1 | ||
| G601R760001-17-CM | 50 THK 304 STAINLES STEEL | 1 | ||
| G601R760001-19-CM | 25 THK 6061-T6 | 1 | ||
| G601R760001-7 | VOIR JOBBOSS POUR PLUS DINFORMATIONS | 1 | ||
| G601R760001−1 | Kit − Power Plant Rigging (A/C 7001 to 7036) | 2 | ||
| G670726000-1 | AGB HYDRAULIC PUMP PAD BLANK-OFF PLATE REMOVE AND REPLACED WITH ITEM 29-00-00-011 | 1 | ||
| G700-260001-1 | HARNESS - FIRE DETECTION/EXTINGUISHING | 2 | ||
| GSB5260001 | TOOL-AIRSTAIR DOOR GAS SPRING INSTALLATION | 4 | ||
| GSB5260001-1 | SLING | 1 | ||
| GSB5260001-B | TOOL; TOOL, A/S DOOR GAS SP; TOOL-GAS SPRING DOOR | 1 | ||
| GSB85260001 | TOOL AIRSTAIR DOOR GAS SPRING INSTALLATION | 1 | ||
| H150-6000-1 | 269 ADAPTER ASSY | 1 | ||
| H150E-6000-1 | DRIVE AXLE ASSY | 1 | ||
| H150E-6000-10 | COUPLING ASSEMBLY | 1 | ||
| H250E-6000-1 | HP250 DRIVE ASSY | 1 | ||
| HH-600010 | Self Master Gage | 1 | ||
| HP-6000-1 | H150 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | ||
| HP-6000-10 | H150 LIFT ADAPTER - B47 - STD GEAR | 1 | ||
| HP-6000-11 | H250 LIFT ADAPTER - B204/AH-1 | 1 | ||
| HP-6000-12 | H200/250 LIFT ADAPTER - H135/EC135 - LOW GEAR | 1 | ||
| HP-6000-13 | H200/250 LIFT ADAPTER - H135/EC135 - HIGH GEAR | 1 | ||
| HP-6000-14 | H150 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | ||
| HP-6000-15 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR | 1 | ||
| HP-6000-16 | H250 LIFT ADAPTER - MD900 | 1 | ||
| HP-6000-17 | H200/250 LIFT ADAPTER - B427 - LOW GEAR W/O CABLE CUTTERS | 1 | ||
| HP-6000-18 | H200/250 LIFT ADAPTER - B427 - HIGH GEAR | 1 | ||
| HP-6000-19 | H200/250 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | ||
| HSA7600-01 | STUD AND TAB LEVER PULLNG TOOL | 1 | ||
| IAS-2600-01 | TOOL | 1 | ||
| IFR6000-110-OPT2 | MULTIFUNCTION RAMP TEST SET | 1 | ||
| IFR6000110 | TRANSPONDER DME ET TCAS | 2 | ||
| KB280L0060-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| L600-010 | CANOPY/ENGINE COVER | 1 | ||
| L6000-1/4-20 | 1/4-20 Speed Driver Style Rivet Nut Tool, MADE IN USA! | 1 | ||
| L6000-1/4-28 | RIV NUT TOOL | 1 | ||
| L6000-10/32 | RIV NUT TOOL | 1 | ||
| LAN-06-0001 | C02/N2 CHARGE BENCH | 1 | ||
| LIL50600.01 | BRAKE SPRING TOOL | 1 | ||
| LTCT 28600-01 | TESTER LIGHT LOW | 1 | ||
| M21826000-1 | TOOL | 2 | ||
| M291V6000101 | Main Pump Protection Cover | 1 | ||
| M65600010A | TOOL | 1 | ||
| M720V6000102 | Engine Blank | 1 | ||
| MA260001-90 | R/I EQUIPMENT, APU FIRE BOTTLE | 1 | ||
| MC2600-01 | CONTROL BEZEL ASSEMBLY | 1 | ||
| MC260001-44 | T/R LOCK | 1 | ||
| MC360001-1 | Handling Eqpt | 1 | ||
| MC360001-180 | HANDLING EQUIPMENT - REMOVAL/INSTL, AUX FUEL TANKS, SECTION 43 | 1 | ||
| MC360001-208 | ACME ROD | 1 | ||
| MC360001-41 | CLAMP ASSEMBLY, LIFTING STRAP | 1 | ||
| MC960001-134 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, SONOBUOY ROTARY | 1 | ||
| MG9026-0001 | SWITCHES ADJUSTMENT TOOL | 1 | ||
| MODEL 10-4036-0001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| MTOO03-CE600010-00-A pos.4 | Sujeccion seguridad | 1 | ||
| NB360-001 | PRESSURE GAUGE (PSI & BAR DIAL) - (0-360PSI) | 1 | ||
| NMTC 12-16 0.001 | UTROMETER MICROMETRIC DIGITAL THREE POINT 12-16 MM 0.001 | 1 | ||
| NWL4246000-1 | TOOL | 1 | ||
| OWB9600010 | FIXTURE LIFT & ROTATE FWD FAN FRAME | 1 | ||
| P54-860-001 | IP54 Digital Micrometers (Range: 0" to 1") (Accuracy: +-.001") (Resolution: .00005") (Add to cart: Add To Cart) | 1 | ||
| PRHI01-CE80056-0001 | Util pruebas hidraulicas | 1 | ||
| PWC60001 | tool | 1 | ||
| RBE105-600011W1 | Check Device | 1 | ||
| RBEM291V6000101 | Main Pump Protection Cover | 2 | ||
| RBEM720V6000102 | Engine Blank | 2 | ||
| RC-60001005 | RIVET CUTTING PLIER;RIVET DIA.: 1/16 3/32 1/8 9/64 5/32 3/16 7/32 IN;MODEL:RC-60001005;MAKE:CLECO | 1 | ||
| rev_A_95-92016-0001 | COVER | 1 | ||
| SCJN600-01 | MANOMETRO DIGITAL JUNIOR | 1 | ||
| SE72-60001 | OIL PRESSURE ADJUSTING TOOL | 1 | ||
| SLG35-6X60-001/01 | SLING, 60” LONG | 1 | ||
| SN60001 | COMBO WR SET SAE NEW HOLLAND | 1 | ||
| ST60001 | STUBBY RATCHETING SCREWDRIVER | 1 | ||
| SUT260001 | SET OF EQUIPMENT FOR TESTING TIGHTNESS OF THE FIRE EXTINGUISHING SYSTEM | 1 | ||
| T290600011070 | OPLS ETHERNET CONNECTING CABL | 1 | ||
| T290600011080 | TOOL, OPLS POWER CABLE | 1 | ||
| T845Z6000-1 | SEAT-TRACK DUMMY | 1 | ||
| TM60001 | TOOL | 1 | ||
| TMH ST06-00-01 | BODY | 1 | ||
| TYCO6000108 | PINCE A SERTIR | 1 | ||
| UD 6000-1L | TOOL | 1 | ||
| UH60-001 | WINDSHIELD ONLY COVER (WRAP-AROUND) | 1 | ||
| VTS260001202 | LEVELING PAD NO 600 | 1 | ||
| WH6000-183-06 | TOOL | 1 | ||
| WH6000-183-06X40 | THIS IS NOT A TOOL | Not Available | Not Available | |
| WH6000-183-06X60 | THIS IS NOT A TOOL | Not Available | Not Available | |
| WH6000-183-10X55 | THIS IS NOT A TOOL | Not Available | Not Available | |
| WH6000-183-8 | TOGGLE HEAD RIG PIN | 1 | ||
| X762P6000101 | SHUT-OFF LEVER BLOCKER | 1 | ||
| Z088H6000110 | CAMPILER (CIDS CAM CAMPILER TOOL) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
