| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 58000 | LUBE ACCESSORY KIT | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 98A32104158000 | EQUIPMENT HOISTING MAIN GEAR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A55307580000 | Sling- Fin, Dorsal (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A55307580001 | Sling- Fin, Dorsal (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D28108658000 | TOOL-PRESSURE TEST,ACT (CALIBRATION) | 1 | ||
| (CALIB) 98F29208258000 | DEVICE DEVICE-R I,RAT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F52308858000 | DEVICE POSITIONING FORK AFT (CALIBRATION) (CALIBRATION) | 1 | ||
| 00.35800.0016 | TOOL | 1 | ||
| 00127-058-000 | MANOMETER FOR PN D02538K2D1B01A0 (0-300 KN) | 1 | ||
| 00127-258-000 | TOOL | 1 | ||
| 00179-580-000 | SUPPORT WIRE COMPL., | 1 | ||
| 00179-658-000 | TIE-DOWN STRAP COMPL | 1 | ||
| 00464-058-000 | BALL LOCK PIN | 1 | ||
| 00512-658-000 | PROTECTIVE PLATE | 1 | ||
| 01 0558 000 | TOOL | 1 | ||
| 01-0558-0000 | HEAD: TOWBAR,ATR 42/72, TRONAIR,ST | 6 | ||
| 01-0580-0000 | Head, Dauphin Hh-65a (Ce) | 1 | ||
| 019858-000 | CELL, VHP 430 KH-3 | 1 | ||
| 02-5800-000 | BOTTLE JACK | 1 | ||
| 024-0458-000 | ADJUSTMENT | 1 | ||
| 03-5800-0100 | TAILSTAND, | 1 | ||
| 03−5800−0000 | Support − Rear Fuselage | 1 | ||
| 03−5800−0010 | Support − Rear Fuselage | 5 | ||
| 0580001-1 | FUEL QUANTITY TEST BOX | 4 | ||
| 105580000 | MULTIHEAD | 1 | ||
| 1135-8000 | PORTABLE MAINTENANCE PLATFORM | 2 | ||
| 1158000-001 | Mounting bracket | 1 | ||
| 1158000-15 | CANISTER-VALVE,REFUEL | 5 | ||
| 121580000000 | VENTILATED ARINC BASEPLATE | 1 | ||
| 135-800017SLR | KLP RING HNDL ENGRAV | 1 | ||
| 14-6805-8000 | REGULATOR - STRUT/ACCUMULATOR SERVICE | 1 | ||
| 155800-02C5-7C-4 | WEIGHING EQUIPMENT ELECTRICAL | 1 | ||
| 155800-03 | TOOL | 1 | ||
| 155800-09 | WEIGHING KIT 100,000 LBS. PN: 155800-09 / 4 EACH. LOAD CELL PN: C-46175 MFG REVERE | 1 | ||
| 15800-029-3 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 174580-000 | FLPS POWER SUPPLY | 1 | ||
| 212-92058-0001 | SETTINTG (DISPOSITIVO REGLAJE SONDA ÁNGULO DE ATAQUE) | 2 | ||
| 212-92058-0003 | SETTING AOA SENSOR C-212 | 2 | ||
| 3210C58000G20ME1 | TOOL | 1 | ||
| 323.9101.5800.003 | SPECIAL TOOLS | 1 | ||
| 330A91-5800-05 | M.G COWLING SLING 30DAN | 1 | ||
| 330A91-5800-07 | M.G COWLING SLING "30DAN" | 1 | ||
| 330A91580008 | SLING SLIDING COWL | 1 | ||
| 330A91580009 | SLING SLIDING COWL ANTENNA AREA | 1 | ||
| 332A94‐5800‐00 | "M.G.C"LATCH FORK ASSEMBLY | 1 | ||
| 332A96-5800-00 | MPAI STUB FRAME BLANKING COVERS | 1 | ||
| 341A91-5800-00 | SUPPORT TOLE PAR FEU | 1 | ||
| 35800.0016 | A320 SHEAR PIN FOR T | 1 | ||
| 35800.0017 | SHEAR PIN BUSHING | 1 | ||
| 35800.0025 | L-HANDLE M8X50 135-8 | 1 | ||
| 444-65158-000 | O-RING MOUNTING TOOL | 1 | ||
| 4772-0258-000 | SCRAPER | 5 | ||
| 50580001 | TORQUE WRENCH BASIC 730N/2 SERVICE-MANOSKOP, 17.5-87.5 IN.LB | 1 | ||
| 50580002 | TORQUE WRENCH CLICK-TYPE 35-175 in.lb | 1 | ||
| 50580004 | TORQUE WRENCH CLICK-TYPE 70-350 in.lb | 1 | ||
| 50580005 | "3/8” DR. TORQUE WRENCH 50 – 440 IN. IB/ | 1 | ||
| 5075800001 | SAFE-TORQUE A 1 TORQUE WRENCH WITH 1/4" SQUARE HEAD DRIVE, 2-12 NM | 1 | ||
| 5100058-000302.000.0 | INSTALLATION FOR STARTING ENGINES MSU-200 | 1 | ||
| 5284 CPN 024- 0458-000 | ADJUSTMENT TOOL | 1 | ||
| 55800-03 | WEIGHING KIT, ELECTRONIC | 1 | ||
| 5580001-1 | ENGINE AFT SLING (ENGINES WITH THRUST REVERSES & ALL JT15D ENGINES) | 1 | ||
| 5800-00 | CRIMPING PLIERS | 1 | ||
| 58000T80 | ADAPTER PLATE | 1 | ||
| 611580000 | RETATING TABLE | 1 | ||
| 63825-8000 | Hand Crimp Tool for MX120G™ Crimp Terminals | 1 | ||
| 6580000-1 | OPTICAL PRISM | 1 | ||
| 822-3158-0004 | PORTABLE DATA LOADER | 1 | ||
| 8812258000 | HANDLING TOOL | 1 | ||
| 8812258000/8819974000 | Engine Sling - Arriel 1/2 | 1 | ||
| 8815858000 | FLANGED BLANK | 1 | ||
| 8816758000 | FITTING TOOL | 1 | ||
| 8817758000 | BLANK | 1 | ||
| 8817958000 | SEALING FIXTURE | 1 | ||
| 8818358000 | HARNESS | 1 | ||
| 8818658000 | BLANK | 1 | ||
| 8819458000 | SET OF TEST CONNECTORS | 1 | ||
| 8819658000 | MODULE 04 C2R PACKAGING | 1 | ||
| 8819858000 | BLANK | 1 | ||
| 8819958000 | SEGMENT HOLDING TOOL | 1 | ||
| 93158-000 | SUPPORT JACK-1 | 1 | ||
| 981158000 | 15 AMP 13 PLANER" | 1 | ||
| 98A27408580000 | FIXTURE - STRUT, THS | 1 | ||
| 98A27508058000 | CHECK TOOL-WING TIP BRAKE, FLAP.SUPS BY 98A27508063000 | 1 | ||
| 98A32104158000 | EQUIPMENT-HOISTING-MAIN GEAR SIDESTAY ASSEMBLY | 6 | ||
| 98A53307580001 | SLING | 1 | ||
| 98A54003058000 | CHEST | 1 | ||
| 98A55307580000 | TOOL | 5 | ||
| 98A55307580001 | SLING - FIN, DORSAL | 3 | ||
| 98A55307580002 | Heissgeschirr fuer finne sling fin dorsal | 1 | ||
| 98D28108558000 | WRENCH - R-I DRAIN VALVE | 9 | ||
| 98D28108558000-001 | WRENCH - R-I DRAIN VALVE | 1 | ||
| 98D28108658000 | TOOL-PRESSURE TEST,ACT | 11 | ||
| 98D28108658000S | ACT CARGO T1 AND T2 TEST TOOL | 1 | ||
| 98D57004058000 | HONING KIT PYLON | 1 | ||
| 98F12108458000 | ADAPTER - FILLING, GEARBOX | 8 | ||
| 98F29208258000 | DEVICE-R I,RAT | 2 | ||
| 98F52308358000 | PIN-RIGGING,CARGO DOOR LATCHING MECHANISM | 10 | View Images / Tech Appraisal | |
| 98F52308858000 | DEVICE-POSITIONING, FORK AFT | 4 | ||
| 98L57508758000 | WRENCH ADAPTER | 1 | ||
| 98M32211058000 | GDO HANDLE - UP-LOCK | 1 | ||
| 98V57004058000 | HINGE HINGE RIB2 DRILL TEMP | 1 | ||
| 99458-000 | Piper 99458-000 Tow Bar, For 28/28R Fixed Wing Aircraft | 1 | ||
| 99A53307258000 | CALIBRATION STANDARD | 1 | ||
| 99A57104358000 | REFERENCE STANDARD | 1 | ||
| 99A57204358000 | REFERENCE STANDARD | 1 | ||
| 99F53303058000 | REFERENCE BLOCK | 1 | ||
| 99F57103058000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| AP5-8000LB | DILLON AP MECHANICAL DYNAMOMETER | 1 | ||
| B58-000 | CANOPY COVER | 1 | ||
| CA85800-000 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CA85800-0001 | White Safety Clip | 1 | ||
| CA85800-0003 | Red Safety Clip | 1 | ||
| CA85800-0005 | Yellow Safety Clip | 1 | ||
| CA85800-0007 | Blue Safety Clip | 1 | ||
| CA85800-0009 | Green Safety Clip | 1 | ||
| CA85800-001 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CA85800-003 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CA85800-005 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CA85800-007 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CA85800-009 | CIRCUIT BREAKER SAFETY CLIP AND TAG | 1 | ||
| CG9000058-0001 | NACA Plugs | 1 | ||
| D2511225800000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| E61580-00 | TOOL | 1 | ||
| F27058000 | INSTALLATION TOOL FOR SEAL | 1 | ||
| F27458000 | SUPPORT | 1 | ||
| F27580000 | BOX/AIRCRAFT AXLE EXTRACTOR | 1 | ||
| F58000-7 | TOOLING PART | 1 | ||
| F78AE0258-000 | SLING-EXHAUST NOZZLE | 1 | ||
| G6013595800000 | WHEEL GENERATOR DRIVING DEVICE | 1 | ||
| GTN358000-4 | FLARING NOSE ASSEMBLY | 1 | ||
| HC130H0258-000 | WATER DRAIN TOOL | 4 | ||
| HC130H0258-000/B | WATER DRAIN TOOL (NO FUNNEL) | 1 | ||
| HC137H0258-000 | TANK | 1 | ||
| HFS-GTN358000-216 | FLARE TOOL NOSE PIECE | 1 | ||
| HFS-GTN358000-4 | FLARE TOOL NOSE PIECE | 1 | ||
| IFR-6000 72425 (1002-5800-000) | IFR-6000 | 1 | ||
| LK58000 | SUPP0RTING-IGV TEST C0NN,LT HARNESS-ASSY, | 1 | ||
| LSL58000 | HD LUBE ACC KIT | 2 | ||
| LTMIL-98D28108658000 | TEST TOOL ARRANGEMENT ACT | 1 | ||
| MTOO1-CA-75800-0801 | Llave plana muescas | 1 | ||
| MTOO1-CA-75800-0901 | Llave plana muescas | 1 | ||
| OH58-000 | BUBBLE COVER | 1 | ||
| PWC58000 | Sling | 1 | ||
| R255-R1758-000W6400-01 | INSTALLATION DEVICE BRACKET A330 - new | 1 | ||
| S58-000 | WINDSHIELD/INTAKE SCREEN COVER | 1 | ||
| SP38580000 | PNEUMATIC COIL COMP W/STATION | 1 | ||
| SPOO03-D23658000 | Util de desmontaje posición 3 | 1 | ||
| T-8819958000 | Ring Holding Tool | 1 | ||
| T8812258000 | ENGINE SLING | 1 | ||
| TB5800-OC192-10GE | TB5800-OC192-10GE;Single Port 5800v2 1 GE/10GE - DS1/OC192 Package | 1 | ||
| TB5800-OC192-10GE-DL | TB5800-OC192-10GE-DL;TB5822P Dual 1-10G-all PDH-SONET - Ethernet - p5000i -patch cables -optics | 1 | ||
| TB5800-OC192-10GE-DP | TB5800-OC192-10GE-DP;TB5822P Dual 1G - single 10G with all PDH - SONET - Ethernet | 1 | ||
| TB5800-OC192-10GE-DP-MA | TB5800-OC192-10GE-DP-MA;TB5822P 2x1G-1x10G PDH - SONET-Ethernet-OTDR-SLM | 1 | ||
| TB5800-OC192-10GE-DPG | TB5800-OC192-10GE-DPG;TAA Compliant package for US Government - TB5800 OC192 10Ge Dual Port Package no Wifi or BT | 1 | ||
| TB5800-OC192-10GE-P1G | TB5800-OC192-10GE-P1G;TB5800 GAD Package 1 Israel - TAA | 1 | ||
| TB5800-OC192-10GE-P2G | TB5800-OC192-10GE-P2G;TB5800 GAD Package 2 Israel - TAA | 1 | ||
| TB5800-OC48-GIGE | TB5800-OC48-GIGE;Single Port 5800v2 1 GE - DS1/OC48 Package | 1 | ||
| TB5800-OC48-GIGE-DP | TB5800-OC48-GIGE-DP;TB5822P Dual 1G Ethernet - OC3-48 - PDH - p5000i - Patch cables - optics | 1 | ||
| TB5800-OTU4-NOPT | TB5800-OTU4-NOPT;T-BERD 5800-100G with OTU4 no optics | 1 | ||
| TMH DI58-00-00 TDS | TOOL | 1 | ||
| TMH GAC58-00-00 | TOOL | 1 | ||
| TMHB558-00-00 | HOLD OPEN FIXTURE | 1 | ||
| TMHBS58-00-00 | BRACE-HOLD OPEN COWLS (GE CF6-80C2) | 2 | ||
| TMHBS58-00-01 | TOOL | 1 | ||
| TMHBS58-00-02 | TOOL | 1 | ||
| TMHD158-00-00 | BEAD BREAKER | 1 | ||
| TMHDI58-00-00 | STAND BEAD BREAKEAR | 3 | ||
| TT-TB5800-OTDR-VC | TT-TB5800-OTDR-VC;Fiber Fundamentals and OTDR Testing w/TB-5800 Virtual Class-2 days/person | 1 | ||
| TT-TB5800-OTDR-VC-CERT | TT-TB5800-OTDR-VC-CERT;VIAVI-Certified TB-5800 Fiber and OTDR Testing 2-Day VC program per person | 1 | ||
| WAV358000216 | NOSE PC ASSY PNL GROMMET FLARE | 1 | ||
| WAV3580003 | NOSE PC ASSY PNL GROMMET FLARE | 1 | ||
| WAV3580004 | NOSE PC ASSY PNL GROMMET FLARE | 1 | ||
| WAV3580005 | NOSE PC ASSY PNL GROMMET FLARE | 1 | ||
| WAV3580006 | NOSE PC ASSY PNL GROMMET FLARE | 1 | ||
| WS5580004 | TORCH LINER | 1 | ||
| WS5580005 | GAS HOSE - MIG130 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
