| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 5000-1 | SURETEST PREMIER CAL SYSTEM | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 100-250-001 | TOOL | 1 | ||
| (CALIB) 100-350-001 | TOOL | 1 | ||
| (CALIB) 100-450-001 | TOOL | 1 | ||
| (CALIB) 100-650-001 | TOOL | 1 | ||
| (CALIB) 98A26203250001 | BLANKING PLUG SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32104150001 | EXTRACTR EXTRACTOR - PIN - MAIN GEAR PIC (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D29207550001 | PROTECTION EQUIPMENT RAT (CALIBRATION) | 1 | ||
| (CALIB) 98S31405000100 | PHOBOS HARNESS | 1 | ||
| (CALIB) C01518150TFIX05-0001 | Mode Select Load Handle (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9000045-0001 | IRS KIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9000050-0019 | WHEEL BIN REM/ INSTL DOLLY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9000095-0001 | RUDDER RIGGING KIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9522105-0001 | MECHANISM, RIGGING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) PV050-001 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) RT15050-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) RT4550-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) RT6050-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) RT7750-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) RT9050-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | ||
| 00061-2305-0001 | LOCKNUT WRENCH | 1 | ||
| 00061-2305-0001PM | WRENCH - BEARING LOCKNUT | 1 | ||
| 00092-2125-0001 | PROTRACTOR, ANGLE OF ATTACK | 1 | ||
| 001-171-500018 | LENS:10GPM, | 1 | ||
| 00162-150-001 | lifting beam | 1 | ||
| 004-150-0010 | ELASTIC-FORMING-TOOL | 1 | ||
| 00450335-0001 | TEST SPECIFICATION | 1 | ||
| 006.255.0001 | TOOL | 1 | ||
| 00851-1125-0001 | QUICK DISCONNECT AIR FITTING | 1 | ||
| 01-0705-0001 | Multi-Head, Boeing 727 | 1 | ||
| 01500105000/10 | INSTALL TOOL | 1 | ||
| 01580405000/10 | TANG BREAK-OFF TOOL | 1 | ||
| 02-5000-100-0938 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-100-1562 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-100-1875 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-100-2188 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-100-2500 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02-5000-120-2500 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02500-01 | DIGITAL PROTRACTOR | 1 | ||
| 0301500010 | UNION | 1 | ||
| 05042750001 | WERA - 5042750001 FEMALE SQUARE 784 A QUICK-RELEASE CHUCK, ADAPTOR 1/4 | 1 | ||
| 065-50001-0200 | CSU-COMMAND SENSOR UNIT | 1 | ||
| 071-50001-8102 | TOOL | 1 | ||
| 080-350-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 08050001 | Bit 1/4" POZIDRIV® PZ1 L.25mm | 1 | ||
| 08250001 | Bit 1/4" 1 L.50mm | 1 | ||
| 100-650-001 | ANALYZER - DATABUS, ARINC 629 | 1 | ||
| 100−450−001 | Tester − data bus (ARINC 429+CSDB) | 1 | ||
| 108435-0001 | TORQUE ADAPTER | 1 | ||
| 115-500-015 | SEARCH UNIT | 1 | ||
| 115000 1-10 | DRILL BITS SET | 1 | ||
| 1159CS50001-1 | HSH | 1 | ||
| 1159CS50001-1 HOE | HORIZONTAL STABILIZER HOIST | 1 | ||
| 1159GSE50001-17 | MAIN ENTRANCE DOOR SAFETY LOCK KIT | 2 | ||
| 116-102 25-50 0,01 | MITUTOYO | 1 | ||
| 1193-500-01 | STRAY VOLTAGE TEST | 1 | ||
| 1200-01-95-50001-00 | PROPELLER LIFTER ADAPTER | 1 | ||
| 120780150001 | TEST BOX | 1 | ||
| 121880150001 | CABLE C1 | 1 | ||
| 12250001 | Extension 3/8" L.150mm | 1 | ||
| 12L2500-01 | Dotco® Die Grinders (Capacity: 0.6 hp (0.45 kW)) (Collet: 1/4" Collet) (Overall length: 6.9" (175 mm)) (Rpm (no load): 25000) (Type: Front Exhaust) (Add to cart: Add To Cart) (Capacity: 0.6 hp (0.45 kW)) (Collet: 1/4" Collet) (Overall length: 6.9" (175 mm | 1 | ||
| 12L2500-01RT | Dotco® Straight Routers (Rpm (no load): 34000) (Shank diameter capacity: 1/4") (Overall length: 6-3/4" (172 mm)) (Type: Front Exhaust 0.3 hp (.22 kW)) (Add to cart: Contact us to order) (Rpm (no load): 30000) (Shank diameter capacity: 1/4") (Overall lengt | 1 | ||
| 139W00-500−01 | REMOVAL TOOL - BACKREST TABLE ASSEMBLY | 6 | ||
| 145-186 25-50 0,01 | MITUTOYO | 1 | ||
| 145-750001-40111H1-2 | TOOL | 1 | ||
| 1450-001-240 | CASE PELICAN | 1 | ||
| 14Y0050-001 | TOOL, ACC SUPPORT | 1 | View Images / Tech Appraisal | |
| 1500019 | EXTENSION, DIALGAUGE | 1 | ||
| 19050001 | PINION FOR 3/4"-RATCHET | 1 | ||
| 200-015-0001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2115B250-001 | RP Adapter | 1 | ||
| 212-92115-0001 | Calibre Flap R/H | 1 | ||
| 212-92125-0001 | Sling, center wing hoist | 1 | ||
| 212-92155-0001 | Kit, Engine Control Rigging Pins | 1 | ||
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | ||
| 212-A1975-0001 | Util taladrado | 1 | ||
| 21550001 | MULTI RACHET SCREWDRIVER (SMARTY BOX) | 1 | ||
| 225-00012N1 | ACRYLIC COVER, | 1 | ||
| 228A2100-150-001WF-1 | Weld fixture | 1 | ||
| 228A2100-250-001WF-1 | Weld fixture | 1 | ||
| 228A2200-050-001WF-1 | Weld fixture | 1 | ||
| 234500-01 | SOFTWARE, INTERFACE DRIVER-SATCOM | 1 | ||
| 23500-016 | BALLSTOP BALL STOP UNIT | 1 | ||
| 240500-01 | TAPE READER UNIT | 1 | ||
| 241-125-000-101 | TEST UNIT | 1 | ||
| 2500014489 | EN-DISQUE COMPRESSEUR BP1 | 1 | ||
| 2500014499 | BP DRIVE FLANGE | 1 | ||
| 2500015179 | EN-DISQUE COMPRESSEUR BP2 | 1 | ||
| 2500017439 | EN-PISTON (EBAUCHE) | 1 | ||
| 2500018369 | EN-FEUILLE DE BRASURE | 1 | ||
| 2500018999 | EN-FEUILLE DE BRASURE | 1 | ||
| 2500019009 | EN-FEUILLE DE BRASURE | 1 | ||
| 2500019029 | EN-PASTILLE DE BRASURE | 1 | ||
| 2500019059 | EN-FEUILLE DE BRASURE | 1 | ||
| 2500019109 | EN-FEUILLE DE BRASURE | 1 | ||
| 261-191-500-011 | VIBROMETER | 1 | ||
| 27-15-00013 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 27-15-00014 | SUPPORT (BLACK) | 2 | ||
| 28-0-0500-01 | ATI ICE BLANK | 1 | ||
| 3005A0500-01 | SEAL-INSTALLATION TOOL | 1 | ||
| 3017A0500-01 | SEAL-INSTALLATION TOOL | 1 | ||
| 3085-0001 | CALIBRATION SLEEVE | 1 | ||
| 309005-0001 | HAND PUMP | 1 | ||
| 31150001 | ADAPTOR | 1 | ||
| 31150001 STAH | 3115 PERĖJIMAS 1/4" STWL | 1 | ||
| 3255-0001W01 | CALIBRATING SLEEVE | 1 | ||
| 332A91‐2500‐01 | RADOME PLUG | 1 | ||
| 332A92250001 | CABIN COVER | 1 | ||
| 35-91015-0001 | EQUIPPED TOOL KIT | 1 | ||
| 35-91035-0001 | MLG LOCKING PIN | 1 | ||
| 35-92035-0001 | PINES BLOCAJE | 1 | ||
| 35-92045-0001 | rigging pin | 1 | ||
| 35-92085-0001 | util centrado | 1 | ||
| 35-92115-0001 | Herramienta calibra AOA | 1 | ||
| 35-92125- 0001 | TUBE | 1 | ||
| 35-92135-0001 | Kit nivelacion | 1 | ||
| 35-92165-0001 | Escaleras | 1 | ||
| 35-92175-0001 | GAUGE, CONTROL PEDALS | 1 | ||
| 35-92185-0001 | TEST HOSE KIT | 1 | ||
| 35-92205-0001 | conectores, adaptadores | 1 | ||
| 35-92235-0001 | EO/IR TURRET, R/I TROLLEY | 1 | ||
| 35-92245-0001 | TEMPLATE JACKING REAR FUSELAJE | 1 | ||
| 35-92285-0001 | ADAPTER LH, JACKING REARFUSELAGE | 1 | ||
| 35-92315-0001 | ADAPTER, JACKING REAR FUSELAGE | 1 | ||
| 35-93955-0001 | TROLLEY OUTER WING INBOARD LEADING EDGE LH/RH | 1 | ||
| 350-001 | COCPIT COVERS | 1 | ||
| 350001-3 | HOIST ASSY | 1 | ||
| 35M5M01150001 | TEST SET - DADC | 2 | ||
| 365A920050001 | Ens amarrage gros temps | 1 | ||
| 407BF-5000-1 | LABEL | 1 | ||
| 429BF-5000-1 | PLACARD | 1 | ||
| 429BF-5000-10 | PLACARD | 1 | ||
| 429BF-5000-11 | PLACARD | 1 | ||
| 429BF-5000-12 | PLACARD | 1 | ||
| 429BF-5000-13 | LABEL, RED TRIANGLE | 1 | ||
| 429BF-5000-14 | LABEL, BLUE DIAMOND | 1 | ||
| 429BF-5000-15 | LABEL, ORANGE SQUARE | 1 | ||
| 429BF-5000-16 | LABEL, WHITE CHEVRON | 1 | ||
| 429BF-5000-17 | LABEL, GREEN CIRCLE | 1 | ||
| 437750-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 438-0050-0-01 | TOOL | 1 | ||
| 4402500015 | FREE TURBINE DISC | 1 | ||
| 45-0001 | PITOT-STATIC TESTER | 1 | ||
| 450001000000 | HYDRAULIC UNIT | 1 | ||
| 450001004000 | PUMP CYLINDER | 1 | ||
| 450001301000 | PUMP PISTON | 1 | ||
| 48-30-35-000110-912-0 | TOOL | 1 | ||
| 500-181-30 0-150 0,01 | MITUTOYO | 1 | ||
| 5000-1-02A-2396 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 5000-1/4 | THREADED DRILL BIT | 2 | ||
| 5000-1/8"L | REPLACEMENT DRILL | 1 | ||
| 5000-11 | THREADED DRILL BIT | 1 | ||
| 5000-13 | THREADED DRILL BIT | 1 | ||
| 5000-13L | THREADED DRILL BIT | 1 | ||
| 500012-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 500012-99 | CABLE | 1 | ||
| 5000197 | DIGITAL CALIBRATOR | 1 | ||
| 525000-150-0 | FILE FILE, HALF-ROUND | 1 | ||
| 525000-150-00 | FILE FILE, HALF-ROUND 150MM | 1 | ||
| 526450001 | ROLLERBOARD | 1 | ||
| 532500013 | CRIMPING DEVICE - BALL MATS | 1 | ||
| 53271A2500-01 | INSTALLATION FRAME | 1 | ||
| 53377A2500-01 | MLG LIFTING BEAM | 1 | ||
| 54750001-1 | THRUST REVERSER PINNING KIT | 1 | ||
| 54750001-3 | TR PINNIG KIT | 1 | ||
| 555-00014 | SPACER: BASE PANEL,BATTERY, | 1 | ||
| 56995-0001 | PLUG | 1 | ||
| 573-622 0-150 0,01 ±0,02 | MITUTOYO | 1 | ||
| 57565-0001 | Seal Guide | 1 | ||
| 57949A0500-01 | Support Pillar, Lower Half | 1 | ||
| 6050001-2 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 615000-1002 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 6150001789159 | 200 AMP CABLE | 1 | ||
| 6260A0500-01 | GUIDE - RET/ACT PIN (NLG) | 1 | ||
| 6260A6500-01 | SLIDING TUBE SEAL PROTECTOR | 1 | ||
| 6263A0500-01 | NLG LOWER BEARING INSTALL FRAME | 1 | ||
| 6263A2500-01 | MLG UPPER BEARING RETAINING RING R/I TOOL | 1 | ||
| 6263A5500-01 | TOOL | 1 | ||
| 6263A6500-01 | LOWER TORQUE LINK INST. CONE | 1 | ||
| 6280A0500-01 | 780 REMOVAL & INSTILLATION TOOLS KIT | 1 | ||
| 640-050-001 | STANDARD-CALIBRATION | 1 | ||
| 6500-018-04 | REMOVAL TOOL | 1 | ||
| 6500-018-08 | EXTRACTION TOOL | 1 | ||
| 6500012V | TURNBUCKLE M12 DIN 82004, FORM A | 1 | ||
| 6605-000101 | CONVERTER-12 | 1 | ||
| 6605000101AU | CONVERTER 120V 60HZ | 1 | ||
| 6635000185830 | PROBE (NSN 6635000185830) | 1 | ||
| 69410050001 | BLIND RIVET NUTS SLIM COUNTERS HEAD M5X11.5 STEEL | 1 | ||
| 695-000195 | TOOL | 1 | ||
| 695-000196 | TOOL | 1 | ||
| 700-1150-001 | REEL DRIVER ADJUSTMENT TOOL | 1 | ||
| 70050001 | Center punch, octogonal 100 x 10mm | 1 | ||
| 703A93750001 | CASE, AP SEAL EXCHANGE | 1 | ||
| 71050001 | Screw extractor M5-M6 3/16-1/4 | 1 | ||
| 71552050001 | SELF TAPPING INSERT M5 X 7 STEEL ZINC | 1 | ||
| 745-0001-1GSE | THRUST REVERSER MANUAL OPENING SYSTEM | 1 | ||
| 746A0500-01 | Switch | 1 | ||
| 77450001 | Voltage tester 100-250V | 1 | ||
| 79150001 | Spare strap for no. 12005 | 1 | ||
| 79250001 | Spare blades f. no 12965, -1 20mm 5pcs. | 1 | ||
| 80006385-00-0-1 | TOOL | 1 | ||
| 80450001 | 45.CL.1-use80450003*3/8"STRIPS-200MM | 1 | ||
| 8050-001-02 | FL-AGE | 1 | ||
| 8050001 | PZ1x1/4" BIT POZIDRIV/SUPADRIV | 1 | ||
| 81.15000-1650-00055 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 81602-R815505-0001 | INSPECTION ZONE TEMPLATE (FACE SIDE) | 1 | ||
| 8250001 | SIZE: 1 - TRI-WING BITS | 1 | ||
| 827-2050-001 | ANTENNA ADAPTER | 1 | ||
| 827CMT4500-01-RO1 | CM MASTER KEY | 1 | ||
| 830-7250-001 | LOADER,DATA-CABLE | 1 | ||
| 846-905-000-1 | Engine Tool | 1 | ||
| 85000-11201 | FILTER ELEMENT | 1 | ||
| 85201-FE24050001 | PRESSURE CHECK TOOL | 1 | ||
| 8Z10150-001-34 | DRILL GUIDE | 1 | ||
| 9005000-11203 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 95-000102-100-1 | TOOL | 1 | ||
| 95-000104-100-14 | TOOL | 1 | ||
| 95-25965-0001 | FITTING STRUCTURAL COMPONENT | 1 | ||
| 95-92015-0001 | ENGINE CONTROL RIGGING SET | 1 | ||
| 95-92115-0001 | Soporte estabilizador vertical | 1 | ||
| 95-92125-0001 | FIRE-EXTINGUINSHING BOX | 1 | ||
| 95-92165-0001 | UNIDAD CONSUMO MOTOR SIMULADOR | 1 | ||
| 95-92235-0001 | ADAPTER, JACKING REAR FUSELAGE (LH) | 1 | ||
| 95-92245-0001 | ADAPTER, LH JACKING REAR FUSELAGE | 1 | ||
| 95-92265-0001 | REAR DOOR ACCESS STAIR | 1 | ||
| 95-92415-0001 | WINGLET SLING | 1 | ||
| 95-92535-0001 | BONDING JUMPERS KIT | 1 | ||
| 95-A0795-0001 | KIT EXTRACCION/INSERCION CASQUILLOS | 1 | ||
| 950001-005 | C1V-1-0,375-1-1,81 CLAMP DIE | 1 | ||
| 9550001900 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 97500-019 | TOOL | 1 | ||
| 980-4750-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9880500019 | NUT | 1 | ||
| 9891050001 | INSTRUMENT: MEASURING,WATER,MASTERFILLER, | 3 | ||
| 9899050001 | JFM MASTERFILLER AIRCRAFT BATTERY CHARGER/ANALYZER PN: 9899050001 | 1 | ||
| 98A26203250001 | BLANKING-PLUG SET | 3 | ||
| 98A27203250001 | FRAME SUPPORT | 1 | ||
| 98A27508050001 | CLAMP PLATE | 1 | ||
| 98A32104150001 | EXTRACTOR - PIN - MAIN GEAR PICKUP | 8 | View Images / Tech Appraisal | |
| 98D1010350001 | TOOL | 2 | ||
| 98D2780350001 | TOOL ZERO LOCKING FLAP | 1 | ||
| 98D29207550001 | PROTECTION EQUIPMENT - RAT | 11 | ||
| 98D29207550001-3 | TOOL | 1 | ||
| 98D29307550001 | PROTECTIVE EQUPT. | 1 | ||
| 98D52307515000-100 | Cargo actuator door gag - A320 | 1 | ||
| 98F0710350001 | TOOL | 1 | ||
| 98F321040250001 | TOOL | 1 | ||
| 98F56103500010 | Pad & Pad screw | 1 | ||
| 98F56103500011 | Pad & Pad screw | 1 | ||
| 98S10250001 | TOOL | 1 | ||
| 98S10250001000 | TOOL | 1 | ||
| 98S31405000100 | KIT MFC PHOBOS SOFTWARE | 3 | ||
| 98S35105000100 | NITROGEN OXYGEN COUPLING | 1 | ||
| 98S55005000101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98S55005000102 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98S55005000103 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98S55005000106 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98S55005000107 | SUPPORT TYPE F | 1 | ||
| 98S55005000110 | STRAIGHT EDGE | 1 | ||
| 98S55005000110-REVF | STRAIGHT EDGE. RUDDER AND ELEVATOR BALANCING TOOL | 1 | ||
| 9945000100 | GASKET,CORRUJOINT | 1 | ||
| 9945000120 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9945000140 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9945000160 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 995-0001-183 | LOCATOR | 1 | ||
| 995-0001-193 | CRIMP HEAD (CBT-600) | 1 | ||
| 995-0001-950 | TOOL | 1 | View Images / Tech Appraisal | |
| 995000-1 | TOOL | 1 | ||
| 99D545030050001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| A05-000-1 | NLG STORAGE AND REMOVAL DOLLY | 1 | ||
| A109BF-5000-1 | PLACARD | 1 | ||
| A330-92045-0001 | ARO console foot rest actuator R/I device | 1 | ||
| A330-92055-0001 | ERAS PAD | 1 | ||
| A330-92305-0001 | EMERGENCY DOOR LOCKING DEVICE | 1 | ||
| A330-92405-0001 | GREASING TOOL KIT AND ACCESSORIES | 1 | ||
| A330-92465-0001 | BACKUP MOTOR ALIGNMENT TOOL | 1 | ||
| A330-92485-0001 | R/I EQUIPMENT SAFEBOX | 1 | ||
| A330-92605-0001 | REMOTE CONTROL POD | 1 | ||
| A330-93905-0001 | CALIBRATION BLOCK | 1 | ||
| A537-72503-000W8500-01 | LOWER CARGO DOOR SUPPORT FWD | 1 | ||
| A537-72503-000W8500-01A00 | LOWER CARGO DOOR SUPPORT FWD | 1 | ||
| AA1-25000-13 | WRENCH, FLOAT TORQUING SET | 1 | ||
| AC500-010 | CANOPY COVER, Wrap-Around | 1 | ||
| AC500-011 | COCKPIT/NOSE COVER (original "blunt" nose) | 1 | ||
| AC500-015 | CANOPY COVER, over top type | 1 | ||
| AC500-016 | EXTENDED CANOPY/NOSE COVER, OVER-TOP TYPE (500B SHRIKE) | 1 | ||
| AC500-017 | NOSE COVER PATTERN (POINTY DESIGN) | 1 | ||
| AGE-00250-001 | KIT WHEEL | 1 | ||
| AT5000-1 | REAR BEARING | 1 | ||
| AT5000-10 | ROTOR | 1 | ||
| AT5000-11 | FRONT END PLATE | 1 | ||
| AT5000-12 | FRONT GEAR CARRIER | 1 | ||
| AT5000-13 | REAR GEAR CARRIER | 1 | ||
| AT5000-14 | PLANETARY GEAR | 1 | ||
| AT5000-15 | 2PK INTERNAL GEAR | 1 | ||
| AV-500-010-1 | ASSY,LOAD CELL STATIC BALANCER | 1 | ||
| AV-500-010-2 | ASSY,LOAD CELL STATIC BALANCER | 1 | ||
| AW139BF-5000-1 | LABEL | 1 | ||
| AY969-00050-001 | CABLE TRT AVH530/A TRIPLEX (DRA707) | 1 | ||
| B350-001 | COCPIT COVERS | 1 | ||
| B50-001 | CANOPY COVER, original windshield, extends aft to cover air stair | 1 | ||
| BIT9-217500-01 | Bearing Installation Tools | 1 | ||
| BIT9-217500-01 PM | BEARING INSTALLATION TOOLS | 1 | ||
| C01518150-TFIX05-0001 | Adapter Handle Mode select | 1 | ||
| C01570000-TFIX05-0001 | MECHANISM RIGGING FIXTURE | 1 | ||
| C07500017-003 | BATTERY CHARGER | 1 | ||
| C20105000-1 | TACHOMETER | 1 | ||
| C350-001 | CANOPY COVER, (extends to horiz stab LE) | 1 | ||
| C500-010 | CABIN COVER | 1 | ||
| C50001 | PAINT THICKNESS METER | 1 | ||
| CA25000-13-1 | arandela | 1 | ||
| CDITTC50001 | DISC. | 1 | ||
| CE200615-0001 | LEAF SRING | 1 | ||
| CE400285-0001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| CF9-217500-01 | Check Fixture | 1 | ||
| CG9000045-0001 | CG9000045-0001 | 1 | ||
| CG9000050-0013 | WHEEL BIN SUPPORT/REMOVAL | 1 | ||
| CG9000050-0019 | WHEEL BIN REMINSTL DOLLY | 1 | ||
| CG9000055-0001 | Flap Hinge Bushing Tooling | 1 | ||
| CG9000065-0001 | Kit - Leak Test Shroud and drain Lines | 1 | ||
| CG9000095-0001 | KIT RUDDER RIGGING | 1 | ||
| CG9000115-0001 | TEST KIT INERTING LEAKOBSTRUCTION | 1 | ||
| CG9522105-0001 | MECHANSM SLIDE CABLE RIGGING OWEED | 1 | ||
| CPN830-7250-001 | DATA LOADER CABLE | 1 | ||
| CPS500-0150 | 3-60 PSI VAPOR LEAK TESTER W/A | 1 | ||
| CPS500-0150NA | 3-60PSI VAPOR LEAK TESTER | 1 | ||
| CUTA5000106C | Tool Set − Installation and Extraction of Check Valve | 3 | ||
| CUTA5000137C | EXTRACTION TOOL SET | 1 | ||
| D227450001 | SPANNER ANTI-SHIMMY VALVE | 1 | ||
| D523R4020-000W8500-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D523R44020-000W8500-01 | PIN SET-RIGGING, MDCD | 1 | ||
| DAI-7500-01-00-ST | PRESSURE RELIEF VALVE | 1 | ||
| DRT35000-100 | BLOCKS,HOLDING | 1 | ||
| DT1550-001S | TRIPOD JACK TELESCOPIC (E170 TAIL) | 1 | ||
| EADPD1500-01 | MIXCOAT DISPENSER PNEUMATIC F SYSTEM | 1 | ||
| EB2T5000-10 | EDDIE BOLT RATCHETING WRENCH | 1 | ||
| ECU50001 | HAZ DUTY REPLACEMENT BULB | 1 | ||
| EMB-00650-001 | Rigging Device | 1 | ||
| EVCRB85-0001 | CABLE | 1 | ||
| EXBD 400-500-013 | CALIBRATION TEST STANDARD(CTS) | 1 | ||
| F26500010 | TOOL | 1 | ||
| F26515000-1 | RIVETING TOOL | 3 | ||
| F270-70054-000W8500-01 | THSA TOOL ZERO POSITIONING | 1 | ||
| F28015000-1 | MLG BEARING CUP R/I TOOL | 1 | ||
| F28295000-1 | TOOL | 1 | ||
| F50-001 | COCKPIT COVER, COVERS DOOR | 1 | ||
| FB70-025-000-105 | FWD JOCKEY WHEEL ASSY | 1 | ||
| FB70-025-000-106 | JOCKEY WHEEL (HEAVY USE) | 1 | ||
| FTE-03-35-15000-1 | PROTRACTOR INNER FLAP | 1 | ||
| FTE-04-35-15000-1 | PROTRACTOR OUTER FLAP | 1 | ||
| FTE03-35-15000-1(LH) | INNER FLAP SETTING GAUGE 2900 | 1 | ||
| FTE04-35-15000-1(LH) | OUTER FLAP SETTING GAUGE | 1 | ||
| FTH-5000-1625-16-VZW | FTH-5000-1625-16-VZW;Package VZW FTH5K; 1625nm M; 16p LCAPC; DC; 23in; ONMSi | 1 | ||
| G1002750001-001 | GAUGE, FLAP ACTUATOR STOP OUTBD | 2 | ||
| G1003234050-001 | MAIN QUADRANT RIG PIN | 1 | ||
| G1003521050-001 | Passenger Oxygen Line Restrictor | 1 | ||
| G1004500350-001 | PMAT KIT, 2ND. GENERATION (PROLINE 21 ADVANCED) | 1 | ||
| G600-350001-001 | TOOL, LANYARD VALIDATION, MASK (O2) | 1 | ||
| G604-450001-9 | Smartfix Software | 1 | ||
| G700-350001 | Oxygen Pressure Test Gauge | 1 | ||
| G700−350001−1 | KIT - 02 BOTTLE PRESSURE CHECK | 4 | ||
| GEGC995-0001-85 | TOOL KIT | 2 | ||
| GROO-01-95-50001-00 | STAND MAINTENANCE ENGINE | 1 | ||
| GROO-02-95-50001- 00 | FLIGHT LINE PLATFORM | 1 | ||
| GROO-04-95-50001- 00 | FLIGHT LINE LADDER | 1 | ||
| GSB2350001 | HEAD SET-GROUND CREW | 1 | ||
| GSB2750001 | ADAPTER-RIGHT ANGLE DRIVE | 1 | ||
| GSB3250001 | EXTRACTOR-NLG TRANSFER TUBE | 1 | ||
| GSC-21-95500-01 | CLIPNUT TAPE | 1 | ||
| GSC-21-95500-01SP | TAPE | 1 | ||
| GT-5000-1050-6 | TOOL | 1 | ||
| H-7284N-00250-00500- 0137-S110 | LOAD CYLINDER | 1 | ||
| H150E-5000-1 | HANDLE ASSY | 1 | ||
| H150E-5000-10 | PIPE | 1 | ||
| H150E-5000-11 | ROD | 1 | ||
| H150E-5000-12 | SLEEVE | 1 | ||
| H150E-5000-13 | BOX | 1 | ||
| H150E-5000-14 | ARM ASSY | 1 | ||
| H150E-5000-15 | PIPE | 1 | ||
| H150E-5000-16 | COVER | 1 | ||
| H150E-5000-17 | TUBE | 1 | ||
| H150E-5000-18 | COVER | 1 | ||
| H150E-5000-19 | PLATE | 1 | ||
| H250E-5000-1 | STEERING HANDLE | 1 | ||
| H250T1-5000-15 | DIPSTICK | 1 | ||
| H46750-001 | EXTRACTOR-LINK BARREL | 3 | ||
| HE35000-1 | GREASE FITTING 1/4-28 | 1 | ||
| HH.HP5000.12000.2JIC | HIGH PRESSURE HOSE TOOL | 1 | ||
| HP-5000-11.25 | HP-5000-11.25 | 1 | ||
| HP-5000-11.5 | SADDLE TUBE 11.5 IN | 1 | ||
| HP-5000-12 | SADDLE TUBE | 1 | ||
| HP-5000-12.25 | SADDLE TUBE 12.25 IN | 1 | ||
| HP-5000-13 | SADDLE TUBE | 1 | ||
| HP-5000-13.875 | SADDLE TUBE 13.875 IN | 1 | ||
| HP-5000-14 | SADDLE TUBE, 14 IN | 1 | ||
| HT-500-010P | CONTROL BOX ASSEMBLY | 1 | ||
| HT-500-010P-019A | AIR TANK PRESSURE GAUGE | 1 | ||
| HT-500-010P-02 | Control Box Latch | 1 | ||
| HT-500-010P-04 | Panel Plate | 1 | ||
| HT-500-010P-05 | Control Panel | 1 | ||
| HT-500-010P-06 | 100 PSI Pressure Gauge | 1 | ||
| HT-500-010P-08 | Check Valve | 1 | ||
| HT-500-010P-14 | ARROW REGULATOR | 1 | ||
| HT-500-010P-16 | 3/8" Dia Hose - 30 Foot Length | 1 | ||
| HT-500-010P-17 | 1/4 " DIA. Hose - 10 Foot Length (4 LOLA) | 1 | ||
| HT-500-010P-19B | AIR TANK MANIFOLD W/SHUT OFF | 1 | ||
| HT-500-010P-20 | Acorn Nut | 1 | ||
| HT-500-010P-22 | Pipe Plug | 1 | ||
| HT-500-010P-32 | Ball Valve | 1 | ||
| HT-500-010P-43 | Fluid Quick Disconnect - Black | 1 | ||
| HT-500-010P-55 | Jomar Ball Valve | 1 | ||
| HT-500-010P-56 | Hose 1/4 ID - 14" Length | 1 | ||
| HT-500-010P-64 | O-Ring for Fluid Tank Cap | 1 | ||
| HT-500-010P-65 | Fluid Tank | 1 | ||
| HT-500-010P-65C | REPLACEMENT TANK PRESSURE RELIEF | 2 | ||
| HT-500-010P-65D | Tank Lid | 1 | ||
| HT-500-010P-70A | Wash Emblem | 1 | ||
| HT-500-010P-70B | Rinse Emblem | 1 | ||
| HT-500-010P-76 | Flat Free Tire Set | 2 | ||
| INIMD50-001 | MINI-DUCTOR 12V STORAGE CASE | 1 | ||
| JHW50001 | VINYL POUCH 4-1/2 X 12-1/2 | 1 | ||
| JHW50001A | ZIP-LOCK POUCH 4-1/2 X 12-1/2 | 1 | ||
| JIC262500-01-04 | F100 FIRE EXT. LEAK TEST | 1 | ||
| KGB750-001 | AIR DATA COMPUTER | 2 | ||
| KL0050-0013 | VW/AUDI SCKT 12.5MM | 1 | ||
| KL0050-0014 | GOLF/AUDI SCKT14.5MM | 1 | ||
| KL0050-0015 | MAESTRO/MONTEGO SCKT | 1 | ||
| KT9050-001 | AXLE JACK 90-99 TON | 1 | ||
| KWY035000129 | SGH BASKET SET | 1 | ||
| L50001T04 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| L50001T06 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| L50001T08 | LIGHTWEIGHT HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| L854M5000101 | FLOOR FIXING KIT | 1 | ||
| LA250-001 | CANOPY/NOSE COVER | 1 | ||
| M533V5000101 | Cabin Deck Handle | 1 | ||
| M632V5000102 | Oil Drainage Flexible Hose | 1 | ||
| M642V5000102 | Tail Rotor Head Damper Holding Tool Kit | 1 | ||
| MA250001-1 | R/I EQUIPMENT, GALLEY AIR CHILLER | 1 | ||
| MA350001-1 | LEAK TEST SET, CREW OXYGEN PRESSURE | 1 | ||
| MA350001-46 | LEAK TEST SET, CREW OXYGEN PRESSURE | 1 | ||
| MC250-001-1 | INSTALL/REMOVE MISSION SYSTEM | 1 | ||
| MC250001 | REMOVAL INSTALLATION EQUIP | 1 | ||
| MC550001-1 | THREAD PROTECTOR AND PUNCHKIT – HORIZONTAL STABILIZER, HINGE PIN REMOVAL | 1 | ||
| MC950001-36 | JACK ADAPTER-ESM RADAR R/I | 1 | ||
| MDTS11750-001 | LOWER BEARING RETAINER | 1 | ||
| MG174-500-01 | CEMENTING T00L | 1 | ||
| MG174-500-01-VST | CEMENTING TOOL | 1 | ||
| MG3640500-0100 | REAR BEARING PULLER S/A | 1 | ||
| MILGT50-001 | DOLLY MLG | 1 | ||
| MLGT50-001 | DOLLY MLG | 1 | ||
| MTOO01-95-41055-0001/0002 | Util montar | 1 | ||
| MV500-0100 | COOL SMOKE | 1 | ||
| MV500-0170 | DIESEL EGR CLEANING TOOL | 1 | ||
| MW500-01 | Moore & Wright Bevel Protractor 360°, 150 & 300mm Blade | 1 | ||
| MW500-01D | Moore & Wright Digital Bevel Protractor 360° | 1 | ||
| NDT3237-0.050/0.015 | BOEING REFERENCE STANDARD 737 PT 4 53-30-12 FASTENER (BACR15GF5*). Includes Test Report and Certificate of Conformance. | 1 | ||
| OET25500010 | NIPPEL-A1 SLANGP 10MM ST | 1 | ||
| OET25500012 | NIPPEL-B1 G 1/4" UITW ST | 1 | ||
| OET25500016 | OET NIP SERIE B1 G2/BI | 1 | ||
| OET25500019 | OET NIP SERIE B1 SLO6MM | 1 | ||
| OWF950001 | STAND FOR THP BLADES | 1 | ||
| P3BR-92015-0001 | Scissor lift dolly | 1 | ||
| PAK10500016 | 2.5 X 2.75 X 0.06 1MUL EMITTER | 1 | ||
| PEL1450-001O | 1450-001-150E NO FOAM ORANGE | 1 | ||
| PELI1450-001S | PELI CASE SILVER NO FOAM | 1 | ||
| PSB500O1 | GUN ASSY ORG | 1 | ||
| PT-NDT-250-00104 | REL TAM PANEL | 1 | ||
| PT-SWANDSUPPORT-5000-1YR | PT-SWANDSUPPORT-5000-1YR;PathTrak Software Maintenance and Support for 5000 Port Server - 1 year | 1 | ||
| PTR2500O100 | JACKET HOUSING ORANGE | 1 | ||
| PTT10L250001 | DOTCO ROUTER 1/8IN SETBACK | 1 | ||
| PWC50001 | FIXTURE - PRATT & WHITNEY CANADA | 2 | ||
| PYT1500010 | DRING MICRO ATTACH W/ADHE 10PK | 1 | ||
| PYT1500018 | 80LB TOOL CINCH 10 PACK | 1 | ||
| PYT1500019 | SHRINK LINK 0.75X1.75IN 25PK | 1 | ||
| R50001T04 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| R50001T10 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| R50001T12 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| R50001T16 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| R50001T20 | HIGH PRESSURE RYNGLOK TUBE FITTING-UNION(PERMANET TO PERMANENT) | 1 | ||
| RBEM533V5000101 | Cabin Deck Handle | 2 | ||
| RBEM632V5000102 | Oil Drainage Flexible Hose | 1 | ||
| RBEM642V5000102 | Tail Rotor Head Damper Holding Tool Kit | 2 | ||
| RBW1500019 | Extension | 2 | ||
| RMR7640102450001 | POCKET SCRIBER | 1 | ||
| RRT075000-19 | AFT MOUNT PIN | 1 | ||
| RSE3463-50-001-AB | MFD PARTS FOR -1 | 1 | ||
| RSE3463-50-001-ML | MFD PARTS FOR -1 | 1 | ||
| RT10050-001 | AXLE JACK 100TON (NON-TOWABLE) | 1 | ||
| RT14050-001 | HYDRO, AXLE JACK, 140t/90t | 1 | ||
| RT15050-001 | JACK - AXLE | 1 | ||
| RT4550-001 | AXLE JACK,45 TON-MLG | 8 | ||
| RT6050-001 | AXLE JACK | 7 | ||
| RT7750-001 | HYDRO Axle Jack RT 7750-001 | 2 | ||
| RT7750-001=8K | AXLE JACK | 1 | ||
| RT9050-001 | JACK AXEL 90 TON | 7 | ||
| RT9050-001 (CALIB) | JACK AXEL 90 TON | 2 | ||
| SC4L500012-1 | CABLE | 1 | ||
| SC50001 | CASE UTILITY BAG | 1 | ||
| SENTRY-RSS-AWS-5000-1-M | SENTRY-RSS-AWS-5000-1-M;Contract Term for SENTRY-RSS-AWS-5000-1 | 1 | ||
| SG 50-001 | SERVICE CART ( JACK DOLLT+ NITRGEN) | 1 | ||
| SHC-I-150-0,01 | CALIPER | 1 | ||
| SN50001 | NEW HOLLAND UTILITY BAG | 1 | ||
| SPD70150-001-041 | SHIPPING AND STORA | 1 | ||
| SUS 1020, TEK-5000-1 | ULTRASONIC TRANSDUCER | 1 | ||
| SUT350001 | TOOL | 1 | ||
| TE519-295500010 | KIT | 1 | ||
| TEK-5000-1 | ULTRASONIC TRANSDUCE | 1 | ||
| TLS-S50001 | SPRING TEST MACHINE | 1 | ||
| TM12 / 06950001 | MOBILE MULTILIFT-UPRIGHT | 1 | ||
| TMH MD05-00-01 | INPUT UNION | 1 | ||
| TMH ST05-00-01 | BODY | 1 | ||
| TMY20-55-050-001 | CENTREUR | 1 | ||
| TTC5000-1 | ADAPTER 4 IN 1 | 1 | ||
| U21895000-1 | HOIST BRAKE ASSY | 1 | ||
| VAS-5000-12 | THIS IS NOT A TOOL | Not Available | Not Available | |
| VD192-0005-0001 | CASE CONTAINER GRAY | 1 | ||
| WER05056350001 | 842/1Z BIT BALLEND HEX 2.5/25 | 1 | ||
| WERA05028150001 | 391 NUTSPINNER FLEX 7.0 X 167M | 1 | ||
| WSMF055000-1 | FAN WSPRO185 | 1 | ||
| WSSE055000-1 | POWER CABLE GLAND | 1 | ||
| WTE50001 | NO.1 REPS EXTRACTOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
