| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 4006/1 | SPINNER HANDLE MAGNETIC BIT HO | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-400615 | THIS IS NOT A TOOL | Not Available | Not Available |
| 109-3400-61-1 | PULLER SET - UPPER CASE REMOVAL (MGB) | 1 | |
| 109-3400-61-X | PULLER ASSY, MAIN CASE/UPPER CASE DETACH | 1 | |
| 109-3400-61-Y | PULLER SET, MAIN TRANSMISSION UPPER CASE REMOVAL | 1 | |
| 196K4006-1 | FAN COWL HOLD OPEN | 1 | |
| 2024006-1 | RIVET TOOL BASE | 1 | |
| 26340061-06 | BATTERY CHARGER | 1 | |
| 2MIT65B04006-1 | Boeing | 1 | |
| 4006-1A-44 | CONNECTOR-MALE - TOTAL PRESSURE SYSTEM | 1 | |
| 4006-1B-45 | CONNECTOR-MALE - STATIC PRESSURE SYSTEM | 1 | |
| 40061010 | Double open-ended spanner 10 L.105mm | 1 | |
| 40061111 | Double open-ended spanner 11 L.116mm | 1 | |
| 400611E | NUTRUNNER - ANGLE, PNEUMATIC DRIVE (120-252 IN-LBS) | 1 | |
| 40061212 | Double open-ended spanner 12 L.116mm | 1 | |
| 40061313 | Double open-ended spanner 13 L.131mm | 1 | |
| 40061414 | Double open-ended spanner 14 L.131mm | 1 | |
| 540061 | CONE FOR ORING | 1 | |
| 640061 | POSITIONER | 1 | |
| 640061-1 | POSITIONER | 1 | |
| 840061 | ET-30D Mini Transformer (only for Mini EF-Series Screwdrivers) - UK | 1 | |
| 9795040061 | SCREW | 1 | |
| 98A28104006100 | PALTE ASSY | 1 | |
| 98A57304006102 | Spring housing | 1 | |
| 98A57304006106 | Guide | 1 | |
| 98A57304006108 | Body | 1 | |
| 98D27504006-1 | TOOL | 1 | |
| 98D27504006101 | PIN - RIGGING | 1 | |
| 98D27804006102 | ALIGN LOCK SLAT TRACK 5-12 TOOL | 1 | |
| 98D27804006103 | THREADED BOLT | 1 | |
| 98F57204006100 | PROTECTOR WINGLET | 1 | |
| 98L32104006100 | COLLAR SPLIT S/A | 1 | |
| 98L32104006102 | COLLAR SPLIT S/A | 1 | |
| 99A57304006104 | SPRING | 1 | |
| 99A57304006106 | VALVE GUIDE | 1 | |
| A24006-1 | HOIST EQUIPMENT - APU BATTERY | 5 | |
| A24006-1-1 | B767 BATTERY HOIST TOOL | 1 | |
| A24006-1-B | Battery Inst/Remove Tool | 1 | |
| A24006-1-M | HOIST EQUIP APU BATTERY | 1 | |
| A24006-10-CM | 0190" THK 2024-T3 | 1 | |
| A24006-12-REVNC | **BOEING GSE | 1 | |
| A24006-16-CM | 01875" THK LCS | 1 | |
| A24006-16-REVNC | **BOEING GSE | 1 | |
| A34006-1 | TEST BOX - AUTOMATIC DIRECTION FINDER (ADF) CONTROL PANEL AND REAR MODULE | 1 | |
| B54006-1 | ALIGN FIXTURE - NACELLE SIDE LINK | 3 | |
| B54006-1-12 | ALING FIXTURE - NACELLE SIDE LINK | 1 | |
| B54006-12 | ALIGN FIXTURE - NACELLE SIDE LINK | 4 | |
| B54006-12-M | ALIGNMENT FIXTURE | 1 | |
| B54006-13 | FIXT.ASSY | 1 | |
| B54006-14 | DRILL HANDLE ASSY | 1 | |
| B54006-15 | CAP ASSY | 1 | |
| B54006-16 | SOC HD CAP SCREW | 1 | |
| BAH41400610 | 6IN MILL SAW 2 ROUND EDGES | 1 | |
| BAT4006-1 | 3/32" Reverse Pilot / Reverse Mandrel | 1 | |
| C24006-1 | TESTER GENERATOR/STB | 1 | |
| C24006-1-E | TEST BOX | 1 | |
| C34006-1 | ADAPTOR TRAY | 1 | |
| CAE 35181-MA505400-61 | THIS IS NOT A TOOL | Not Available | Not Available |
| G24006-1 737-1689 | Hook - Support, Power Feeder Wire Bundle | 1 | |
| G24006-1 | SUPPORT HOOK - ENGINE POWER FEED CABLE, PW 4000 ENGINES | 13 | |
| G54006-1 | TOOL | 1 | |
| G600−324006−1 | Gauge − Tire Servicing − with 300 psi Maximum safety valve | 2 | |
| G604-274006-1 | HARNESS, MCU INVERTING | 2 | |
| JK6540-06-.197 | MANDREL | 1 | |
| K24006-1 | BREAKOUT BOX -AUTO TRANSFORMER RECTIFIER UNIT (ATRU) | 1 | |
| K54006-1 | LOCATING JIG EQUIPMENT - SIDE LINK HOLE CENTERS | 1 | |
| M2400-6-10KP | WEIGHING KIT | 1 | |
| MA505400-61 | MPIC | 1 | |
| N240-06-1095 | LED INSPECTION LAMP | 1 | |
| N240-06-1114 | FLATHEAD SCREWDRIVER 1/4 X 8 | 1 | |
| N240-06-1125 | UTILITY KNIFE WITH PRESSURE LOCK | 1 | |
| N240-06-1184 | TRUNK TYPE TOOLBOX | 1 | |
| N240-06-1360 | REDUCER 3/8 X 1/4 | 1 | |
| N240-06-148 | UNIVERSAL PLIERS | 1 | |
| N240-06-149 | CUTTING PLIERS | 1 | |
| N240-06-193 | RATCHET FRAME 1/2 | 1 | |
| PWC40061 | Installation tool | 1 | |
| SBD400-61-31 | D-8 PROP EROSION TAPE TEMPLATE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
