| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 400-10 | Chucking Reamers Carbide Tipped Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decimal | 4 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 08-2034-0010 | Stand (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 30400101 | Pressure Gauge | 1 | ||
| (CALIB) 64001-00 | KIT,AIRCRAFT WEIGHING (CALIBRATION) | 1 | ||
| (CALIB) 64001-0215 | AIRCRAFT WEIGHT KIT (CALIBRATION) | 1 | ||
| (CALIB) 64001-04 | ELECTRONIC WEIGHING KIT (CALIBRATION) | 1 | ||
| (CALIB) 64001-05J5CE | JACK POINT AIRCRAFT WEIGHING SYS/ (CALIBRATION) | 1 | ||
| (CALIB) 64001-06 | JETWEIGH AIRCRAFT WEIGHING KIT (CALIBRATION) | 1 | ||
| (CALIB) 64001-07J5 | SET, AIRCRAFT WEIGH-ING, MODEL JW200 (CALIBRATION) | 1 | ||
| (CALIB) 9440-010 | SMALL AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 97V34001003000 | AIR DATA ACCESSORY KIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57804001000 | SLING - SLAT NO 2 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57904001000 | SLING CENTRE FLAP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57904001001 | Sling - Centre Flap (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27104001000 | LIFTING FRAME-ASSY (AILERON) (S/NO. 9731011) (CALIBRATION) | 1 | ||
| (CALIB) 98D57304001000 | GRID TORQUE NUT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D57304001001 | Grid Nut Torque (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32204001001 | COLLAR COLLAR-SAFETY, NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57304001000 | SLING SLING WING TIP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L07104001000 | PAD PAD-JACKING,WING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L54001000000 | WRENCH SET, PYLON INSTAL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V07104001000 | PLATE - COVER PROTECTION (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27004001000 | R/I TOOL - SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27004001001 | ACTUATOR REMOVAL TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A28404001011 | HARNESS HARNESS-TAIL TRIM TANK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A28404001013 | HARNESS HARNESS, TOTAL TANK CAP AND DEN (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A28404001021 | HARNESS HARNESS - TOTAL TANK CAPACITANC (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99F28304001000 | Dummy plug (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) D9299140400100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| (CALIB) DC400 (101-00800) DC400A (101-00850) WITH DC400A MODULE | DIGITAL DC FUEL QUANTITY TEST SET (BARFIELD INC.) (CALIBRATION) | 1 | ||
| 01-0574-0010 | HEAD, HS-125 & HAWKER 800 CE | 3 | ||
| 01-1204-0010 | TOWBAR, CUSTOM BOEING 747 | 3 | ||
| 01-1224-0010 | TOWBAR, CUSTOM C-130 | 5 | ||
| 01-1234-0010 | TOWBAR: SAAB 2000 CUSTOM, | 1 | ||
| 01-1234-0010-10 | KIT: OPTION,3IN ID EYEBOLT, | 1 | ||
| 01-1274-0010 | GII-GV-GRY-, | 1 | ||
| 01-1274-0010A1 | GII-GVGREY, | 1 | ||
| 01-1340-0100 | Towbar - Clamp Type | 1 | ||
| 01140010 | Uniflex socket 1/4" 10mm L.38mm | 1 | ||
| 01240010 | Socket 1/4" 10mm L.50mm | 1 | ||
| 01473697400/10 | TAP BREAKER FOR INSERTS | 1 | ||
| 01473747400/10 | GO/NO GO TOOL | 1 | ||
| 01473767400/10 | 5/16UNF 3B GAUGE | 1 | ||
| 01640010 | Socket 1/4" 5/32" L.50mm | 1 | ||
| 01A1234-0010 | TOWBAR: SAAB 2000 3 ID, | 1 | ||
| 02-0540-0100 | JACK, | 1 | ||
| 02-0540-0100-01 | OPTION: PN, | 1 | ||
| 02-1040-0100 | MAIN JACK C601 | 1 | ||
| 02-1040-0100-01 | PNEUMATIC AIR PUMP, | 1 | ||
| 02-3400-100-1562 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | ||
| 02040010 | Uniflex socket 3/8" 10mm 45,5mm | 1 | ||
| 03-5804-0010 | Tronair 03-5804-0010 Hawker Beech King Air Tail Stand with Alarm | 3 | ||
| 03040010 | Uniflex socket 1/2" 10mm L.70mm | 1 | ||
| 04-6014-0010 | LIFT, BATTERY HS-125 ALL | 3 | ||
| 04-6040-0100 | AIRCRAFT MAINTENANCE STAND | 1 | ||
| 05-3005-3400-10 | OPTION: CI, | 1 | ||
| 05-3010-3400-10 | OPTION: CI, | 1 | ||
| 05-7008-3400-10 | OPTION: CI, | 1 | ||
| 05-7023-3400-10 | OPTION: CI, | 1 | ||
| 07-740-0100 | BATTERY ANALYZER | 1 | ||
| 08-2034-0010 | STAND, UNIVERSAL ENGINE (CE) | 2 | ||
| 08-4044-0010 | Tronair 08-4044-0010 Engine Compressor Washer Cart (200 gal757 l) | 6 | ||
| 08-4044-0010-A2 | ENGINE COMPRESSOR WASHER | 4 | ||
| 08-4054-0010 | Tronair 08-4054-0010 Pilatus PC-9 Turbine Engine Compressor Washer | 1 | ||
| 08340010 | Bit 1/4" T10 L.70mm | 1 | ||
| 10-00140-0100-000 | ADAPTER NLG JACK | 1 | ||
| 1140010 | 1/4DR x10mm UNIFLEX BI-HEX SKT | 1 | ||
| 115940010-1IF | LEADING EDGE TEMPLATE (LEFT INBOARD) | 1 | ||
| 115940010-2IF | LEADING EDGE TEMPLATE (RIGHT OUTBOARD) | 1 | ||
| 1240010 | 1/4DRx 10mm SOCKT BI-HEX EX DP | 1 | ||
| 140-010 | CANOPY COVER, over top type, (fabric wing models) | 1 | ||
| 1400-100-240 | CASE PELICAN | 1 | ||
| 162400-101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1640010 | 1/4DRX 5/32 SOCKET DEEP BIHEX | 1 | ||
| 2040010 | 3/8DRX 10MM BIHEX UNIFLEX SCKT | 1 | ||
| 206-310-400-101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2400-10 | METER - SOUND LEVEL | 2 | ||
| 282000C540010 | G.P.U. WITH OPITONS, | 1 | ||
| 2940010-01 | HAND CRIMPER | 1 | ||
| 304-00100 | Barfield 304-00100 Pressure Gauge, 0 to 60 psi, For Fixed Wing Aircraft | 4 | ||
| 304-00101 | BARFIELD 304-00101 PRESSURE GAUGE, 0 TO 100 PSI, F | 5 | ||
| 304-00102 | GAUGE | 4 | ||
| 304-00103 | Barfield 304-00103 Pressure Gauge, 0 to 300 psi, For Fixed Wing Aircraft | 3 | ||
| 304-00104 | Barfield 304-00104 Pressure Gauge, 0 to 600 psi, For Fixed Wing Aircraft | 3 | ||
| 304-00105 | 0-1000GAGE, | 1 | ||
| 304-00106 | Barfield Vacuum Gauge | 2 | ||
| 304-00107 | Barfield Pressure Gauge, 0 to 30 psi | 2 | ||
| 304-00109 | BARFIELD PRESSURE GAUGE, 0 TO 200 PSI | 4 | ||
| 3040010 | 1/2DR x 10mm HEX UNIFLEX SKT | 1 | ||
| 30400101 (CALIB) | PRESSUREGAUGE | 1 | ||
| 30840010 | SAFETY CAP, ANTI-RECOIL | 3 | ||
| 31400100 | TEST SET - AFCS | 1 | ||
| 31400105A | TEST SET - AFCS | 1 | ||
| 31400105B | TEST SET - AFCS | 1 | ||
| 332A94‐5400‐10 | JET PIPE LH SETTING SHIM | 1 | ||
| 332A98‐3400‐10 | 130 PLATE ASSY | 1 | ||
| 340-010 | COCKPIT COVER | 1 | ||
| 340-0108-002 | SLICKLINE 0.108" X 25.000FT API CARBON STEEL IPS | 1 | ||
| 370-8040-010 | TOOL | 4 | ||
| 390-524001-0001/917 | RIGGING PINS | 1 | ||
| 400-10.5MM | Chucking Reamers Carbide Tipped Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decimal | 1 | ||
| 400-10MM | Chucking Reamers Carbide Tipped Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decimal | 1 | ||
| 4001-O-ETT | ELEC.TORQ.TESTER,40-400 IN.OZ. | 1 | ||
| 40010-04368 | scales WEIGHING MODEL 40 - 5 KILO | 1 | ||
| 4001074 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 407-240-010-101 | Spanner (407-240-010-101) | 1 | ||
| 412-240-010-100 | BACKLASH TOOL (GEARBOX) | 1 | ||
| 412-240-010-101 | Backlash Tool (412-240-010-101) | 1 | ||
| 429-240-010-101 | TOOL SET | 1 | ||
| 429-240-010-123 | SCREW ASSY | 1 | ||
| 430-240-010-101 | Adapter Assembly | 1 | ||
| 47540010 | Electronic screwdriver T10 L.160mm | 1 | ||
| 52-40010-00R01 | TOOL | 1 | ||
| 570-31400-103 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 57040-010-1 | SCREW | 1 | ||
| 58240010 | WASSERPUMPENZANGE | 1 | ||
| 61040-01-00-004 | TOOL | 1 | ||
| 61104-001-008 | TOOL | 1 | ||
| 63040010 | SHOCK STRUT ASSY NLG | 1 | ||
| 63040010-IAS | TEST FIXTURE SHOCK STRUT ASSY MLG | 1 | ||
| 631400 10 | SOCKET LONG 10MM 1/4" DRIVE | 1 | ||
| 640-010-010 | AUTOSIGMA 3000 PROBE CABLE MOD 47A001 | 1 | ||
| 640-010-048 | LEAD , PHASEC - MINI ROTOGUN | 3 | ||
| 640-010-079 | PROBE CABLE | 1 | ||
| 640-010-153 | EDDY CURRENT SLIDING PROBE CABLE | 1 | ||
| 640-010-153, 9122207, U8800658 | U8800082 CABLE | 1 | ||
| 640-010-180 | TOOL- | 1 | ||
| 640-010-301 | Probe cable 12 pin Lemo/Microdot | 1 | ||
| 640-010-315 | MENTOR CONDUCTIVITY PROBE CABLE. | 1 | ||
| 64001-00 | WEIGHT AND BALANCE KIT | 1 | ||
| 64001-00J5 | KIT,AIRCRAFT WEIGHING | 1 | ||
| 64001-0100 | PremiumGrade™ Hand Crimp Tool | 1 | ||
| 64001-0200 | PremiumGrade™ Hand Crimp Tool | 1 | ||
| 64001-02J5 | AIRCRAFT WEIGHING SYSTEM | 3 | ||
| 64001-0300 | Hand Crimp Tool | 1 | ||
| 64001-04 | Electronic Weighing Kit | 5 | ||
| 64001-0400 | Hand Crimp Tool | 1 | ||
| 64001-045 | AIRCRAFT WEIGHING SYSTEM | 1 | ||
| 64001-04J5 | WEIGHING SET,ELEC-TRONIC | 7 | ||
| 64001-04J5-01 | JETWEIGH NO ACCESSORY KIT | 1 | ||
| 64001-0500 | Hand Crimp Tool | 1 | ||
| 64001-05J5 | EQUIPO ELECTRONICO PESAGE AVION | 4 | ||
| 64001-05J5 OR 607400-04 | JACK POINT AIRCRAFT WEIGHING SYSTEM | 1 | ||
| 64001-05J5-CE | WEIGHING KIT | 1 | ||
| 64001-05W | Jack Point Wireless Aircraft Weighing System / Scale | 1 | ||
| 64001-06 | A/C WEIGHING KIT | 1 | ||
| 64001-0600 | CRIMPER | 1 | ||
| 64001-07 | SET - AIRCRAFT WEIGHING | 2 | ||
| 64001-07J4 | SET - AIRCRAFT WEIGHING | 1 | ||
| 64001-07J5 | SET, AIRCRAFT WEIGH-ING, MODEL JW200 | 4 | ||
| 64001-0800 | Hand Crimp Tool | 1 | ||
| 64001-08J5 | TOOL | 1 | ||
| 64001-0900 | Hand Crimp Tool | 1 | ||
| 64001???06J5 | B737 AIRCRAFT WEIGHING SYSTEM 3 CELLS | 4 | ||
| 64001−04W | Wireless Aircraft Weighing System − Jack Point | 1 | ||
| 640010 | POSITIONER | 1 | ||
| 6740-0100 | Microswitch | 1 | ||
| 7074-001-0 | Housing | 1 | ||
| 71040010 | PULLER | 1 | ||
| 72640010 | PRECISION MITER SAW | 1 | ||
| 77000D24001000020 | GALLEY FEEDER | 1 | ||
| 77000D24001006313 | TESTRELAY | 1 | ||
| 77000D24001006314 | TESTRELAY | 1 | ||
| 77000D24001008020 | DES GENELEC | 1 | ||
| 77000D24001008030 | DES GENELEC | 1 | ||
| 77000D24001008032 | KABEL | 1 | ||
| 77000D24001008040 | DES GENELEC | 1 | ||
| 77000D24001008050 | DES GENELEC | 1 | ||
| 77000D24001008060 | DES GENELEC | 1 | ||
| 77000D24001008062 | KABEL | 1 | ||
| 77000D24001008063 | KABEL | 1 | ||
| 77000D24001008064 | KABEL | 1 | ||
| 77000D24001008065 | KABEL | 1 | ||
| 77000D24001008070 | DES GENELEC | 1 | ||
| 77000D24001008081 | KABEL | 1 | ||
| 77000D24001008082 | KABEL | 1 | ||
| 77000D24001008091 | KABEL | 1 | ||
| 77000D24001008092 | KABEL | 1 | ||
| 77000D24001008093 | POWER ON CABLE | 1 | ||
| 77000D24001008094 | POWER ON CABLE | 1 | ||
| 77000D24001008095 | POWER ON CABLE | 1 | ||
| 77000D24001008096 | POWER ON CABLE | 1 | ||
| 77000D24001008100 | KABEL | 1 | ||
| 77000D24001008101 | KABEL | 1 | ||
| 77000D24001008102 | KABEL | 1 | ||
| 77000D24001008103 | KABEL | 1 | ||
| 77000D24001008104 | KABEL | 1 | ||
| 77000D24001008105 | KABEL | 1 | ||
| 77000D24001009000 | VERI 108 VU | 1 | ||
| 77000D24001010000 | GCU BOX | 1 | ||
| 77000D34001001000 | GLARESHIELD CAPT SIMULATOR | 1 | ||
| 77040010 | Tape measure L.3m | 1 | ||
| 8 9440-010 | JACK - AXLE, FLYAWAY | 1 | ||
| 804-001-01 | OXYGEN TROLLEY TOOL | 1 | ||
| 826486400100 | EASY CUT 1-1 | 1 | ||
| 82740010 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 1 | ||
| 82740010-001-58 | RIGGING TOOL - ALIGNMENT OF THE ROLL SPOILER ACTUATOR | 2 | ||
| 8340010 | T10 TORX POWERDRIVER BIT | 1 | ||
| 83400101-001-89 | ADAPTER (FOR ATC/XPDR BOTTOM ANTENNA) | 1 | ||
| 840010 | EZ-TorQ III 150i (Torque Analyzer 15-150 lbf.in) - UK | 1 | ||
| 85414001-001-58 | CHECKING FIXTURE, GEAR LUG REPL, MLG | 1 | ||
| 85414001-001-58/V | TOOLING FIXTURE | 1 | ||
| 85424001-001-58 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | ||
| 85424001-001-58-1 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | ||
| 86104001-001-141 | TOOL | 1 | ||
| 881997400-101A | ARRIEL AND HONEYWELL LTS 101, AND HTS 900 ENGINE S | 1 | ||
| 8SC5014-001/-002 | COVER LEFT ECS | 1 | ||
| 9040010 | PR LOCKING PADS ASSY 1745-744 | 1 | ||
| 9390940010 | SPIRAWARE | 1 | ||
| 9440-010 | 50 TON AXLE JACK - Fly-A-Way | 2 | ||
| 9568240010 | BALL JOINT | 1 | ||
| 96205-0400100 | TRESTLE BLADES | 1 | ||
| 97A30124001000 | T/S ANT ICE WING | 1 | ||
| 97V34001001000 | Panneau de signalisation essais radio frequence | 1 | ||
| 97V34001003000 | AIR AIR DATA ACCESSORY KIT | 6 | ||
| 97V34001003120 | SPH PITOT STBY ADAPTER | 1 | ||
| 98A274086400100 | HOUSING PROTECTIVE | 1 | ||
| 98A27604001000 | RIGGING PIN-FLIGHT CONTROLS-FUEL SYSTEM | 2 | ||
| 98A27804001000 | ADAPTER-TORQUE TEST | 5 | ||
| 98A28104001000 | WATER DRAIN PURGER | 1 | ||
| 98A28204001000 | TEST HARNESS | 1 | ||
| 98A28404001015 | TOOL | 1 | ||
| 98A32404001000 | Spline Adaptor | 1 | ||
| 98A55104001000 | DOOR - SLAVE ACCESS | 1 | ||
| 98A57104001000 | EXTRACTOR-TO REMOVE/INSTALL IWING SPIGOT SLEEVE ASSEMBLY | 1 | ||
| 98A57304001000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98A57804001000 | SLING - SLAT NO 2 | 2 | ||
| 98A57904001000 | SLING-CENTRE FLAP | 8 | ||
| 98A57904001001 | SLING CTR FLP | 4 | ||
| 98D09104001000 | ATTACHMENT-DEBOGGING | 5 | ||
| 98D27104001000 | FRAME-LIFTING ASSEMBLY,AILERON | 19 | ||
| 98D27504001000 | TIE BAR SETTING | 1 | ||
| 98D275040010000 | ADJUSTER-KINK SEAL | 1 | ||
| 98D2760400100 | SUPPORT STRUT SPOILER 2,3,4,&5 | 1 | ||
| 98D27604001000 | STRUT SUPPORT - SPOILER 2, 3, 4, AND 5 | 20 | View Images / Tech Appraisal | |
| 98D27804001000 | ADAPTOR-DRIVE, SLAT (AND FLAP) | 29 | View Images / Tech Appraisal | |
| 98D28004001000 | ADAPTOR(LEAK TEST) | 1 | ||
| 98D28204001000 | TOOL | 1 | ||
| 98D34103004001-06 | NYLON WIRE .06 DIAM | 2 | ||
| 98D34103004001-07 | NYLON WIRE .07 DIAM | 2 | ||
| 98D34103004001-08 | NYLON WIRE .08 DIAM | 2 | ||
| 98D57304001000 | GRID TORQUE NUT | 10 | ||
| 98D57304001000, OR 98D57304001001 | GRID TORQUE NUT | 1 | ||
| 98D57304001001 | GRID NUT TORQUE | 6 | ||
| 98D57304001046 | TOOL | 1 | ||
| 98D57304001048 | INTERFACE CABLE | 1 | ||
| 98D9104001000 | TOWING ATTACHMENT | 1 | ||
| 98F28004001000 | PROTECTOR - VENT LINE | 1 | ||
| 98F28304001000 | TOOL | 1 | ||
| 98F32104001000 | TOOL-ALIGNMENT, FWD BEARING | 6 | ||
| 98F32104001001 | Guide | 1 | ||
| 98F32104001008 | ALIGN TOOL - FWD BRG | 1 | ||
| 98F32204001000 | SAFETY COLLAR - DOOR NLG | 4 | ||
| 98F32204001001 | COLLAR-SAFETY, NLG DOOR | 19 | ||
| 98F322204001000 | COLLAR-SAFETY, NLG DOOR | 1 | ||
| 98F32304001000 | SIMULATION PLATE | 6 | ||
| 98F32404001000 | DRIVE-SPLINED (WHEEL TACHO) | 11 | ||
| 98F33204001001 | NLG DOOR SAFETY COLLAR | 1 | ||
| 98F54001000000 | BLANKING PLUG KIT-ENGINE PYLON | 2 | ||
| 98F54001000206 | WASHER | 1 | ||
| 98F54001000208 | WASHER | 1 | ||
| 98F54001000210 | WASHER | 1 | ||
| 98F54001000212 | WASHER | 1 | ||
| 98F54001000218 | WASHER | 1 | ||
| 98F54001000222 | PROTECTIVE COVER | 1 | ||
| 98F54001000226 | PROTECTIVE COVER | 1 | ||
| 98F54001001 | TOOL | 1 | ||
| 98F54001001000 | BLANKING,PLUG KIT-ENGINE PYLON | 1 | ||
| 98F54001001202 | FLOAT FORM | 1 | ||
| 98F54001002 | TOOL | 1 | ||
| 98F54001002000 | BLANKING,PLUG KIT-ENGINE PYLON | 1 | ||
| 98F54001002206 | SCREW | 1 | ||
| 98F54001002218 | TOOL | 1 | ||
| 98F54001003 | TOOL | 1 | ||
| 98F54001003000 | BLANKING,PLUG KIT-ENGINE PYLONON | 4 | ||
| 98F54001003210 | SCREW | 1 | ||
| 98F54001003214 | NUT | 1 | ||
| 98F54001003216 | FASTENER | 1 | ||
| 98F54001003220 | WASHER | 1 | ||
| 98F54001003232 | FLOAT FORM | 1 | ||
| 98F54404001000 | SPACER TOOL | 1 | ||
| 98F55104001000 | DOOR-DUMMY, TRIM TANK | 1 | ||
| 98F57004001000 | R/I TOOL-PINTLE BUSH | 3 | ||
| 98F57004001001 | REM.-INST. TOOL - PINTLE BUSH | 1 | ||
| 98F57104001000 | TOOL | 1 | ||
| 98F57304001000 | SLING WING TIP | 6 | ||
| 98F57304001042 | SLING | 1 | ||
| 98L07104001000 | PAD-JACKING,WING | 1 | ||
| 98L27004001000 | GUIDE CONE AILERON ACT PIN | 1 | ||
| 98L28004001000 | SPANNER - WATER DRAIN VALVE | 6 | ||
| 98L32104001000 | RIGGING PIN UPLOCK WLG | 1 | ||
| 98L32204001000 | SAFETY COLLAR NLG | 1 | ||
| 98L34001000 | TOOL | 1 | ||
| 98L34001000000 | SUPPORT TOOL-STANDBY COMPASS CALIBRATOR | 4 | ||
| 98L34001000200 | BRACKET | 1 | ||
| 98L34001000202 | SUPPORT | 1 | ||
| 98L34001000206 | ARCH SUPPORT | 1 | ||
| 98L34001000208 | PIN D2 | 1 | ||
| 98L34001000210 | SPACER | 1 | ||
| 98L34001000212 | LOWER CLEVIS | 1 | ||
| 98L34001000214 | RIGHT CLEVIS | 1 | ||
| 98L34001000216 | NUT | 1 | ||
| 98L34001000218 | PIN D3 | 1 | ||
| 98L34001000220 | NUT WAHSER | 1 | ||
| 98L34001000222 | LEFT CLEVIS | 1 | ||
| 98L34001000224 | STOP | 1 | ||
| 98L34001000226 | LOCK NUT | 1 | ||
| 98L34001000228 | PIN D5 | 1 | ||
| 98L34001000230 | KUNRLED SCREW | 1 | ||
| 98L34001000232 | MANDATORY SIGN | 1 | ||
| 98L34001002 | TOOL | 1 | ||
| 98L34001002000 | ALIGNMENT TOOL-STANDBY COMPASS | 1 | ||
| 98L34001002040 | SUB ASSEMBLY ALIGNMENT TOOL | 1 | ||
| 98L34001002100 | STORAGE CASE | 1 | ||
| 98L34001002200 | LEFT BODY | 1 | ||
| 98L34001002202 | RIGHT BODY | 1 | ||
| 98L34001002204 | SCREW | 1 | ||
| 98L34001002206 | SUPPORTING WASHER | 1 | ||
| 98L34001002208 | THIN STRIP | 1 | ||
| 98L34001002210 | KNURLING BUTTON M4 | 1 | ||
| 98L34001002212 | DESCRIPTION LABEL | 1 | ||
| 98L34001002214 | LTD FOAM | 1 | ||
| 98L34001002216 | BOTTOM FOAM | 1 | ||
| 98L54001000 | TOOL | 1 | ||
| 98L54001000000 | WRENCH SET,PYLON REMOVAL INSTALLATION | 2 | ||
| 98L57004001000 | BRACKET SPOILER | 1 | ||
| 98V07104001000 | PLATE - COVER PROTECTION | 6 | ||
| 98V07104001000-9# | Vacuum cup | 1 | ||
| 98V27004001000 | SPOILER ACT R/I TOOL | 5 | ||
| 98V27004001001 | SPOILER R/I- SPOILER ACTUATOR (NO HOIST | 3 | ||
| 98V2740010000000 | PICHT TRIM SW LOCK | 1 | ||
| 98V32104001000 | TOOL | 1 | ||
| 98V32404001000 | AXLE GUIDE CONE | 8 | ||
| 98V57004001000 | WING LIFTING SLING - RECOVERY | 3 | ||
| 98V57304001000 | SLING - WINGTIP | 3 | ||
| 98V7104001000 | JACK PAD | 1 | ||
| 99-4001-0000 | LOCK: STRUT,ASSEMBLY, | 1 | ||
| 99000F2400101200 | 400 Hz Generation bench | 1 | ||
| 9922340010 | CONNECTOR PIN | 1 | ||
| 99A28204001000 | INDICATOR ASSY | 1 | ||
| 99A28404001000 | HARNESS OUTER TANK | 1 | ||
| 99A28404001001 | HARNESS INNER TANK | 1 | ||
| 99A28404001002 | HARNESS CENTER TANK | 1 | ||
| 99A28404001003 | HARNESS CAD/DEN | 1 | ||
| 99A28404001004 | HARNESS TOTAL TANK CAP | 1 | ||
| 99A28404001005 | HARNESS TOTAL TANK CAD CAP & DEN SIM | 1 | ||
| 99A28404001006 | HARNESS TOTAL TANK CAP SIM | 1 | ||
| 99A28404001007 | HARNESS TOTAL TANK CAD CAP & DEN | 1 | ||
| 99A28404001008 | HARNESS CAD/DEN SIM | 1 | ||
| 99A28404001009 | ASSY OF HARNESSES | 1 | ||
| 99A28404001010 | ASSY OF HARNESSES | 1 | ||
| 99A28404001011 | ASSY OF HARNESSES | 1 | ||
| 99A28404001012 | ASSY OF HARNESSES | 1 | ||
| 99A28404001013 | ASSY OF HARNESSES | 1 | ||
| 99A28404001014 | ASSY OF HARNESSES | 1 | ||
| 99A28404001015 | HARNESS - FUEL SYSTEM TEST | 1 | ||
| 99A28404001016 | ASSY OF HARNESSES | 1 | ||
| 99A28404001017 | ASSY OF HARNESSES | 1 | ||
| 99A28404001018 | ASSY OF HARNESSES | 1 | ||
| 99A28404001019 | ASSY OF HARNESSES | 1 | ||
| 99A28404001020 | ASSY OF HARNESSES | 1 | ||
| 99A28404001021 | ASSY OF HARNESSES | 1 | ||
| 99A28404001022 | HARNESS - FUEL SYSTEM TEST | 1 | ||
| 99A34001001000 | GENERATOR-GAMA | 1 | ||
| 99A53404001000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99D57004001000 | CALIBRATION STANDARD | 4 | ||
| 99D57004001001 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 4 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99D57004001002 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 51-63-03-PB1 Page 5 Figure 51-63-03-991-002-A Sheet 1 Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99D57404001000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99F28304001000 | PLUG | 14 | ||
| 99F57004001000 | REFERENCE BLOCK | 1 | ||
| 99F57244001000 | AIRBUS A330 REFERENCE STANDARD PART 4 57-24-04-991-010-A SHEET 1, 2024-T351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | ||
| 99F57404001000 | AIRBUS STANDARD, A330/A340 NTM 57-11-46 FG 57-11-46-991-001-A | 1 | ||
| 99L51304001000 | NDT CALIBRATION BLOCK | 1 | ||
| 99L57204001000 | REFERENCE BLOCK | 1 | ||
| 99V53404001000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| A400-10 | PIN: RETENTION,CYLINDER, | 2 | ||
| AH64-0010 | STAKING TOOL | 1 | ||
| AT400-10 | LEVER | 1 | ||
| CLRE-02-35-34001-0001 | PROTRACTOR, RUDDER TRIM TAB | 1 | ||
| CLRE03-35-34001-0003 | RUDDER SETTING GAUGE | 1 | ||
| CLRE05-35-34001-0001 | RUDDER ZERO SETTING GAUGE | 1 | ||
| CLRE05-35-34001-0002 | RUDDER ZERO SETTING GAUGE | 1 | ||
| CUTM00400103B | EXTRACTION TOOL SET | 1 | ||
| D24001000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D5453032400100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D632K1400-101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D98BM040010100 | COVER - VENTILATION SCOOP | 1 | ||
| DC400 (101-00800) DC400A (101-00850) WITH DC400A MODULE | DIGITAL DC FUEL QUANTITY TEST SET (BARFIELD INC.) | 1 | ||
| DP2X 400-10-50-01 | 10:1 RATIO 400 ML PNEUMATIC 2-PART ADHESIVE CARTRIDGE DISPENSER | 1 | ||
| DT40010 | ANALYSER DE BUS ARINC 429 | 1 | ||
| DW340010A | STRINGLIGHT 115 FT 10 SOCKETS | 1 | ||
| E400-100 | ENGINE INLET PLUGS (set of 5) | 1 | ||
| E540-010 | EXTENDED CANOPY COVER | 1 | ||
| EEHD4001-022 | BATTERY 2400MAH ULTRA | 1 | ||
| EEHD4001-025 | PRO-LINK EDGE BATTERY | 1 | ||
| EEHD4001018 | 2 CELL BATTE | 1 | ||
| EEHD4001019 | 4 CELL BATTE | 1 | ||
| EO5440-01036 | BUSHING SWAGE KIT TOOL KIT 152 | 1 | ||
| EQ1400100050KLUX | LUXIMETER | 1 | ||
| F2MA971040010 | EXTRACTOR OF ENGINE FORWARD PINS | 1 | ||
| F532-70951-222W8400-10 | KONTURSUPPORT C26.1/C26.2 RHP6-P11 | 1 | ||
| F534-86009-200W8400-10 | TOOL | 1 | ||
| FD5400-107 | FD5400-107 USB | 1 | ||
| FDS40-0102 | STARS SOFTWARE FOR BOTH FDR ANALYSIS (WITH FPR & PFD) & CVR | 1 | ||
| FDS40-0103 | STARS SOFTWARE FOR FDR ANALYSIS (WITH FPR & PFD) | 1 | ||
| FDS40-0104 | MPI | 1 | ||
| FDS40-0107 | USB INTERFACE CABLE | 2 | ||
| FIL8400-1028 | Coupling + Slider + Knob | 1 | ||
| FIL8400-1059 | Coupling + Slider + Knob | 1 | ||
| FTP324001-001-216 | TOOL - FORCE APPLICATION | 1 | ||
| FTP324001-001-216B | RUDDER PEDAL FORCE TOOL | 3 | ||
| G1002724001-001 | Rudder Handling Fixture | 1 | ||
| G600-240010-101 | TOOL ADG NUT REMOVAL | 1 | ||
| G670324001-01 | TOOL | 1 | ||
| G67034001-01 | TOOL | 1 | ||
| GIL414400104 | THREADED ANVIL FOR NUTRIVET M6 | 1 | ||
| GP400-100 | GROUND POWER UNIT - ELECTRICAL - 90 KVA, 115 VAC, 400 HZ - DIESEL POWERED - TRAILER MOUNT | 1 | ||
| H400-100 | INTAKE/EXHAUST PLUGS (VIPER ENGINES) (set of 4) | 1 | ||
| HA2400-10/VXP-MH | TOOL | 1 | ||
| HIX-4001-0P | PUMP HANDLE COWL | 1 | ||
| HIX4001-0G | TOOL | 1 | ||
| HPR400-10 | MALE CONNECTOR | 1 | ||
| HPR400-101 | 4T 10T MALE PUMP HOSE FITTING | 1 | ||
| HPR400-102 | 4T REPL CAP KIT | 1 | ||
| HPR400-103 | 4T 10T REPL HANDLE GRP | 1 | ||
| HPR400-104 | 4T AND 10T PUMP HNDLE PIN KIT | 1 | ||
| J19640010 | Nozzle Swivel 3/4 - 3/4 | 1 | ||
| J2400-100K | Two-Stage Hyd. Jack | 1 | ||
| JW150J5/64001−06J5 | KIT - AIRCRAFT WEIGHTING | 1 | ||
| LAGH 400 (1077600) | GREASE ATTACHMENT (GREASE LADLE) | 1 | ||
| LJ30P190400101-001 | TRACK D LOCATING TOOL | 1 | ||
| LJ30P190400101-002 | TRACK D LOCATING TOOL | 1 | ||
| M47400-100 | Tool | 1 | ||
| MAXSBC400100 | 429 ARINC BOARD FOR PCI BUS | 1 | ||
| MODEL 4400 100KVA | GROUND POWER UNIT | 1 | ||
| MORE0040010 | O'RING 4mmID X 1mmTORE EN EPDM | 1 | ||
| MW-Z40010 | Moore & Wright MW-Z40010 Universal Holder | 1 | ||
| NDT3237-.040/.010 | TOOL | 1 | ||
| OT 40 0100 | INSPECTION TOOL | 1 | ||
| PTGR400-100 | GRIP/JACKET (RED) | 1 | ||
| PWC40010 | Socket | 1 | ||
| Q400-100 | ENGINE INLET PLUGS (set of 2) | 1 | ||
| Q400-103 | STARTER GENERATOR INLET PLUGS (set of 2) | 1 | ||
| Q400-104 | APU EXHAUST PLUG | 1 | ||
| Q400-105 | ENGINE COVERS (set of 2) | 1 | ||
| RB T103400-101 | Comb Gear Box Piston Ring Install Tool Sleeve | 1 | ||
| RDP.750-.400/100Hz | Reflection Ring Probe, .750" OD, .400" ID, 100HZ-10KHz, Triax Connector | 1 | ||
| RMF-24001-06 | THIS IS NOT A TOOL | Not Available | Not Available | |
| RMF24001-05 | THIS IS NOT A TOOL | Not Available | Not Available | |
| RMF24001-08 | WASHER, ROUND | 1 | ||
| RT11-4340-.010/.110 | 11 Step Wedge, .010" to .110 x .010", 1" x 1" pads, 4340 Steel | 1 | ||
| RT5-4340-.010/.160 | 5 Step Wedge, .010", .020", .040", .080" .160" x 1" pads, 5" Length, 4340 Steel | 1 | ||
| S/4640010*M | ARM CLICK,75 FT.LB.MAX | 1 | ||
| S1201001400100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S340-010 | CANOPY COVER | 1 | ||
| SAS540-0103 | MET/GRY FR/SMK MR DMD/BCK SFTY | 1 | ||
| SLG35-8X144-001/01 | SLING, 144” LONG | 1 | ||
| T103400-101 | Comb Gear Box Piston Ring Install Tool Sleeve | 1 | ||
| T792994001000000H | TOOL FOR FLEXIBLE JOINT (A) PIN REMOVAL | 1 | ||
| TAAI8-104001-02 | ARMREST,ASSIST ASSY-FIRST OFFICER, | 1 | ||
| TE519-2944-00-1000 | INTERFACE CABLE | 1 | ||
| TMH AS40-01-05 | TOOL | 1 | ||
| TMH AS40-01-06 | TOOL | 1 | ||
| TMH DI34-00-10 | TOOL | 1 | ||
| TWS240010 | 1/4 HEAD | 1 | ||
| V 4001 OR | VACUUM TOILET CLEANING SYSTEM – VACLAV 1 | 1 | ||
| W-HV400/10 | Bowers W-HV400/10 49N Probe | 1 | ||
| WCI-400-10 | Puller Unit | 1 | ||
| X651P3400101 | SHURLOCK NUT REPLACEMENT TOOL | 1 | ||
| XLR-4001-02 | 52MM LOOP MEASUREMENT CLAMP SET (COUPLERS) | 1 | ||
| ZT34-00-1-01 | TESTER,VACUUM TESTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
