| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 400-41 | Chucking Reamers Carbide Tipped Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decimal | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0400410010 | THIS IS NOT A TOOL | Not Available | Not Available |
| 0400410020 | HALF CLAMP, INNER | 1 | |
| 0400410030 | HALF CLAMP, INNER | 1 | |
| 0400410040 | HALF CLAMP, INNER | 1 | |
| 0400410050 | THIS IS NOT A TOOL | Not Available | Not Available |
| 0400410070 | HALF CLAMP, INNER | 1 | |
| 0400410090 | HALF CLAMP, INNER | 1 | |
| 0400410100 | HALF CLAMP, INNER | 1 | |
| 0400410110 | HALF CLAMP, INNER | 1 | |
| 0400410140 | HALF CLAMP, INNER | 1 | |
| 12/400/4/12 | 400/4 ON 12MT CABLE | 1 | |
| 12/400/4/18 | 400/4 ON 18MT CABLE | 1 | |
| 140-04117-601 | THIS IS NOT A TOOL | Not Available | Not Available |
| 2014/00.41 | 2014/00.41;Adapter 41 VSFF CS connector for OLTS RX Port | 1 | |
| 2024004-1 | ALIGNMENT FIXTURE | 1 | |
| 3404004-1 | FIXTURE AIRCRAFT MAINTENANCE | 1 | |
| 4004.105 | 105mm SINGLE O/E SPANNERDIN894 | 1 | |
| 4004.11 | 110MM SINGLE OE SPANNER | 1 | |
| 4004.115 | 115MM SINGLE OE SPANNER | 1 | |
| 4004.12 | 120MM SINGLE OE SPANNER | 1 | |
| 4004.125 | 125MM SINGLE OE SPANNER | 1 | |
| 4004.13 | 130MM SINGLE OE SPANNER | 1 | |
| 4004.135 | 135mm SINGLE O/E SPANNERDIN894 | 1 | |
| 40041000 | Open-ended spanner 100 L.847mm | 1 | |
| 400410010 | THIS IS NOT A TOOL | Not Available | Not Available |
| 40041050 | 105mm SINGLE O/E SPANNERDIN894 | 1 | |
| 40041100 | 110MM SINGLE OE SPANNER | 1 | |
| 40041150 | 115MM SINGLE OE SPANNER | 1 | |
| 40041200 | 120MM SINGLE OE SPANNER | 1 | |
| 40041250 | 4004.125-125MM SINGLE OE SPANNER | 1 | |
| 40041300 | 130MM SINGLE OE SPANNER | 1 | |
| 40041350 | 135mm SINGLE O/E SPANNERDIN894 | 1 | |
| 400418 | 400418 | 1 | |
| 407-204-004-103 | WRENCH ASSY | 1 | |
| 42040041 | Open-end striking spanner 41 L.235mm | 1 | |
| 5240.0411718068 | 5240.04 | 1 | |
| 526240041NM | WRENCH, TORQUE | 1 | |
| 640041 | POSITIONER | 1 | |
| 8254004-101 | PAD | 1 | |
| 835400-413 | TOOL | 1 | |
| 835400-414 | TOOL | 1 | |
| 8400-418 | EXTRACTION TOOL | 1 | |
| 840041 | LTT250F Torque Analyzer (25-250 lbf.ft) - CN | 1 | |
| 854004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | 1 | |
| 9840041214 | THIS IS NOT A TOOL | Not Available | Not Available |
| 9840041414 | SCREW | 1 | |
| A24004-1 | TEST RELAY - ISOLATION REQUEST, POWER DISTRIBUTION SYSTEM | 2 | |
| A34004-1 | Boeing | 1 | |
| A54004-1 | FIXTURE | 1 | |
| A54004-19 | PRELOAD STRUT FIXT. | 1 | |
| B54004-1 | SLING PYLON | 1 | |
| B54004-13 | PRELOAD FIXTURE EQUIPMENT - STRUT, PW2000 SERIES ENGINES | 5 | |
| B54004-13-M | PRELOAD FIXTURE EQPT | 1 | |
| B54004-14 | TOOL | 1 | |
| BAT4004-1 | 100 Degree Reverse Countersink - Diameter: 1/4", Pilot Size: 3/32" | 1 | |
| BAT4004-10 | 100 Degree Reverse Countersink - Diameter: 1/2", Pilot Size: 1/4" | 1 | |
| BAT4004-11 | 100 Degree Reverse Countersink - Diameter: 9/16", Pilot Size: 5/32" | 1 | |
| BAT4004-12 | 100 Degree Reverse Countersink - Diameter: 9/16", Pilot Size: 1/4" | 1 | |
| BAT4004-13 | 100 Degree Reverse Countersink - Diameter: 5/8", Pilot Size: 3/16" | 1 | |
| BAT4004-14 | 100 Degree Reverse Countersink - Diameter: 5/8", Pilot Size: 5/16" | 1 | |
| BAT4004-15 | 100 Degree Reverse Countersink - Diameter: 11/16", Pilot Size: 5/16" | 1 | |
| C24004-1 | Power Distribution Panel (PDP)- Removal and Installation Equipment | 7 | |
| C24004-1-M | POWER DISTIBUTION PANEL | 1 | |
| C24004-10 | Angle | 1 | |
| C24004-11 | Machine Screw | 1 | |
| C24004-12 | Hex Nut | 1 | |
| C24004-13 | Lock Washer | 1 | |
| C24004-14 | Leg | 1 | |
| C24004-15 | Plate | 1 | |
| C24004-16 | Sq Tube | 1 | |
| C24004-17 | Plate | 1 | |
| C24004-18 | Plate | 1 | |
| C24004-19 | Swivel | 1 | |
| C34004-1 | CIRCUIT BOARD ASSEM. | 1 | |
| C54004-1 | SLING O-HEAD ENGINE | 4 | |
| C54004-11 | SLING EQUIP, - CFM56 | 9 | |
| C54004-12 | TOOL | 1 | |
| DA40-041 | EXTENDED CANOPY/ENGINE COVER, NG Model (Aft scoop ext.) | 1 | |
| FDS40-041 | TOOL | 1 | |
| G24004-1 | HOIST EQUIP. | 1 | |
| G24004-14 | TUBE | 1 | |
| G24004-15-CM | 025THK 6061-T651 | 1 | |
| G34004-1 | Boeing | 1 | |
| G34004-11 | ADJUSTMENT EQUIPMENT - WEATHER RADAR ANTENNA MOUNT | 1 | |
| G34004-13 | TRANSFER PLATE | 1 | |
| G34004-14 | BASE PLATE | 1 | |
| G34004-14-CM | 75 THK A36 | 1 | |
| G34004-17 | ADJUSTMENT EQUIPMENT - WEATHER RADAR ANTENNA MOUNT | 7 | |
| G34004-17-M | ADUJUSTMENT EQUIPMENT | 1 | |
| G54004-1 | SLING STRUT PYLON EN | 1 | |
| GS24004-1 | HOLDING FIXTURE | 1 | |
| H24004-124-5 | SENSE LINE - USE WITH OXYGEN ANALYZER MODEL 111B | 1 | |
| HH2400-4-10CS | Hand Held Wireless - 4 Cells - 10,000 lbs Each - 40,000 lbs Capacity | 2 | |
| HU40041 | TOOL | 1 | |
| J34004-1 | BREAKOUT BOX EQUIPMENT – CONNECTORS (S280W551), LINE MAINTENANCE | 1 | |
| J54004-1 | FAIRING-SLING | 1 | |
| J54004-10 | UPRIGHT ASSY | 1 | |
| J54004-100 | RH OUTBD ATTACH ASSY | 1 | |
| J54004-101 | LH INBD ATTACH ASSY | 1 | |
| J54004-102 | RH INBD ATTACH ASSY | 1 | |
| J54004-103 | MAIN ASSY | 1 | |
| J54004-105 | TOOL | 1 | |
| J54004-106 | TOOL | 1 | |
| J54004-106/105 | TOOL | 1 | |
| J54004-123 | TOOL | 1 | |
| J54004-13 | PRELOAD FIXTURE | 1 | |
| J54004-131 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING | 6 | |
| J54004-131 Repair | TOOL | 1 | |
| J54004-132 | REMOVAL/INSTALLATION EQUIPMENT – AFT STRUT FAIRING | 2 | |
| J54004-134 | TOOL | 1 | |
| K24004-1 | BREAKOUT EQUIPMENT - POWER CONVERSION PANEL (P500/P600, IN-LINE) | 2 | |
| K24004-102 | PANEL ELECTRICAL .0 | 1 | |
| K54004-1 | SLING EQPT. | 1 | |
| M2400-4-10CS | HELICOPTER ELECTRICAL WEIGHTING TOOLS SENSOR | 1 | |
| M65724004-1 | SPECIAL TOOL | 1 | |
| PWC40041 | tool | 1 | |
| Q400-410 | INSULATED MAIN GEAR LANDING GEAR/TIRE COVERS, w/ Herman Nelson heater hose access vent (set of 2) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
