| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 32030 | #30 COBALT JOBBER DRILL BITS | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 98D53203000000 | TUBE SPACER TUBE NLG BEARING FITTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53203001000 | TOOL STATIC PART REWORK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53203004001 | INSTALL INSTALLATION-SATCOM ANTENNA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) C32030-10 | STRAP RETENTION N.L.G / M.L.G INNER CYLINDER (CALIBRATION) | 1 | ||
| (CALIB) C32030-31 | RETENTION STRAP EQPT. (CALIBRATION) | 1 | ||
| 01532030000 | INSERTION TOOL | 1 | ||
| 10-320301-018 | TOOL | 1 | ||
| 10-320301-022 | TOOL | 1 | ||
| 2032030 | KIT, STANDARD, REPAIR REGULATOR | 1 | ||
| 320-300 | HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2) | 1 | ||
| 320-305 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2) | 1 | ||
| 3203-0001-000 | TOOL | 1 | ||
| 330A93-2030-01 | TOOL,INSERTING/EXTRACTION | 1 | ||
| 332A93-3203-00 | Head Wrench | 1 | ||
| 336-093-203-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 43203032 | SPANNER 30X32 MM | 1 | ||
| 473203-003 | SIGNAL CONDITIONER | 1 | ||
| 601C3203-003 | PDO ACTUATOR | 1 | ||
| 732030 | Rotor And Shaft Subassembly | 1 | ||
| 853-203-078-0 | TRUNNION | 1 | ||
| 9562232030 | TERMINAL PROTECTOR | 1 | ||
| 98A32030000000 | WEDGE MLG E/CTRL TENSION REG. TOOL | 1 | ||
| 98D3203000000 | TOOL | 1 | ||
| 98D3203003000 | COVER PITOT STATIC | 1 | ||
| 98D53203000 | TOOL | 1 | ||
| 98D53203000000 | SAPCER TUBE NLG BEARING FITTING | 1 | ||
| 98D53203001 | TOOL | 1 | ||
| 98D53203001000 | STATIC PART REWORK | 2 | ||
| 98D53203001272 | MILLING CUTTER | 1 | ||
| 98D53203002000 | DRILL-INSTALL SATCOM ANTENNA | 1 | ||
| 98D53203003000 | ROUTING-DRILLING | 1 | ||
| 98D53203004 | TOOL | 1 | ||
| 98D53203004000 | DRILL-INSTALL SATCOM ANTENNA | 1 | ||
| 98D53203004001 | INSTALLATION-SATCOM ANTENNA | 1 | ||
| 98D53203005000 | TEMPLATE DRILLING | 1 | ||
| 98M53203002000 | NLG adaptor | 1 | ||
| 99A53203000000 | REFERENCE STANDARD | 1 | ||
| 99A53203001000 | REFERENCE STANDARD | 1 | ||
| 99A53203002000 | REFERENCE STANDARD | 1 | ||
| 99A53203003000 | REFERENCE STANDARD | 1 | ||
| 99A53203004000 | REFERENCE STANDARD | 1 | ||
| 99A53203005000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 53-12-11 Page 407/408 Figure 403. Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99A53203006000 | REFERENCE BLOCK | 1 | ||
| 99A53203007000 | REFERENCE BLOCK | 1 | ||
| 99D53203000000 | STANDARD-REFERENCE | 1 | ||
| 99D53203000002 | REFERENCE STANDARD | 5 | ||
| 99D53203001000 | TOOL NDT CALIBRATION BLOCK | 1 | ||
| A320-300 | QEC OFF-LINK ENGINE LONG-TERM STORAGE "Rain Cap" Style COVER, IAE V2500 Series (Airbus 319, 320) | 1 | ||
| A32030 | LOCK-MAIN LANDING GEAR DOOR | 1 | ||
| A32030-1 | Boeing | 1 | ||
| A32030-10 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 5 | ||
| A32030-11 | Handle Assy | 1 | ||
| A32030-12 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 5 | View Images / Tech Appraisal | |
| A32030-12-M | LOCK EQUIPMENT | 1 | ||
| A32030-13 | Pin | 1 | ||
| A32030-14 | Pin | 1 | ||
| A32030-15 | Tube | 1 | ||
| A32030-16 | Handle Bracket | 1 | ||
| A32030-17 | Grip | 1 | ||
| A32030-18 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 15 | View Images / Tech Appraisal | |
| A32030-18-M | MFD PARTS FOR -18 | 1 | ||
| A32030-18-ML | LOCK, MLG DOOR | 1 | ||
| A32030-19 | TOOL | 1 | ||
| A32030-20 | Pin | 1 | ||
| A32030-21 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 14 | View Images / Tech Appraisal | |
| A32030-21-M | MFD PARTS FOR -21 | 1 | ||
| A32030-22 | Pin | 1 | ||
| A32030-22-REVE | **BOEING GSE | 1 | ||
| A32030-24 | TOOL | 1 | ||
| A32030-25 | TOOL | 1 | ||
| A32030-3 | Handle | 1 | ||
| A32030-30 | LOCK, MLG DOOR | 1 | ||
| A32030-31 | LOCK, MLG DOOR | 3 | ||
| A32030-4 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 11 | ||
| A32030-5 | Pin | 1 | ||
| A32030-6 | LOCK - MAIN LANDING (MLG) GEAR DOOR | 5 | ||
| A32030-7 | Pin | 1 | ||
| A32030-8 | Pin Assy | 1 | ||
| A32030-9 | Pin Assy | 1 | ||
| B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | 1 | ||
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | ||
| B32030-33 | MLG REM/INST | 1 | ||
| BR-B332-03-000 | W-BAR H225 M / EC 725 FLIR CARACAL | 1 | ||
| C32030 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 1 | ||
| C32030-1 | Test eqpt-squib，fire extinguishing system | 1 | ||
| C32030-10 | Retention Strap Equipment - Inner Cylinder, Nose and Main Landing Gear | 22 | ||
| C32030-10 repair | TOOL | 1 | ||
| C32030-10-M | STRAP | 1 | ||
| C32030-11 | RETENTION STRAP ASSY | 4 | ||
| C32030-12 | LOCK STRAP ASSY | 1 | ||
| C32030-12-S | -12 STRAP LESS STENCILING | 1 | ||
| C32030-13 | PROTECTIVE PAD | 1 | ||
| C32030-14 | Tag | 1 | ||
| C32030-15 | Webbing | 1 | ||
| C32030-16 | TOOL | 1 | ||
| C32030-17 | Caution Placard | 1 | ||
| C32030-18 | Warning Placard | 1 | ||
| C32030-22 | GROMMET ASSY | 1 | ||
| C32030-24 | Usage Placard | 1 | ||
| C32030-25 | Usage Placard | 1 | ||
| C32030-26 | Identification Tag | 1 | ||
| C32030-27 | Storage Box | 1 | ||
| C32030-28 | Overcenter Buckle | 1 | ||
| C32030-29 | Cable Assy | 1 | ||
| C32030-30 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 1 | ||
| C32030-31 | RETENTION STRAP EQUIPMENT - INNER CYLINDER, NOSE AND MAIN LANDING GEAR | 9 | ||
| C32030-33 | TOOL | 1 | ||
| C32030-5 | Tag | 1 | ||
| C32030-6 | Tag | 1 | ||
| C32030-7 | Storge Box Assy | 1 | ||
| C32030-9 | Strap Routing Placard | 1 | ||
| F533R5103-203-00 | TOOL | 1 | ||
| G32030 | 1 | |||
| G32030-1 | TOOL | 1 | ||
| G32030-106 | Stud Leveling Foot | 1 | ||
| G32030-112 | Load Cell Indicator | 1 | ||
| G32030-113 | Cable Assy | 1 | ||
| G32030-120 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | ||
| G32030-121 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 1 | ||
| G32030-122 | TEST FIXTURE - BRAKE ROD, MAIN LANDING GEAR (CE) | 3 | ||
| G32030-124 | TOOL | 1 | ||
| G32030-125 | Brake Rod Test Box Assy | 1 | ||
| G32030-126 | Rod Fixture Assy | 1 | ||
| G32030-130 | Long Pin | 1 | ||
| G32030-19 | Upper Rotater Arm Pin | 1 | ||
| G32030-40 | MLG BRAKE ROD FIXT. | 1 | ||
| G32030-51 | Long Pin | 1 | ||
| G32030-54 | SUPERSEDED BY -58 | 1 | ||
| G32030-58 | TEST FIXTURE BRAKE R | 1 | ||
| G32030-59 | Rod Fixture Assy | 1 | ||
| G32030-72 | Spacer | 1 | ||
| G32030-73 | Threaded Rod | 1 | ||
| G32030-80 | Washer | 1 | ||
| G32030-82 | Load Cell Test Box Assy | 1 | ||
| G32030-86 | TEST FIXTURE BRAKE R | 1 | ||
| G32030-89 | Snapper Pin | 1 | ||
| J32030 | TOOL | 1 | ||
| J32030-1 | DOLLEY | 1 | ||
| J32030-14 | CLAMP BASE | 1 | ||
| J32030-2 | TOOL | 1 | ||
| J32030-23 | HITCH PLATE | 1 | ||
| J32030-23-CM | 050" THK 6061-T6 | 1 | ||
| J32030-27 | TOW BAR LUG | 1 | ||
| J32030-27-CM | 050" THK 6061-T6 | 1 | ||
| J32030-28 | TIRE PLATE | 1 | ||
| J32030-28-CMF | 050" THK 6061-T6 | 1 | ||
| J32030-30 | STRAP LUG | 1 | ||
| J32030-30-CM | 025" THK 6061-T6 | 1 | ||
| J32030-31 | CHAIN LUG | 1 | ||
| J32030-31-CM | 025" THK 6061-T6 | 1 | ||
| J32030-37 | FLAT HOOK | 1 | ||
| J32030-39 | CLAMP | 1 | ||
| J32030-4 | TOOL | 1 | ||
| J32030-44 | DOLLY - TRANSPORTATION, NOSE LANDING GEAR | 12 | ||
| J32030-44-M | DOLLY | 1 | ||
| J32030-44-ML | MFD PARTS LESS H/T & PLATING | 1 | ||
| J32030-45 | FRAME | 1 | ||
| J32030-47 | TOOL | 1 | ||
| J32030-49 | TOOL | 1 | ||
| J32030-8 | TOOL | 1 | ||
| J32030-8-M | MFD PARTS FOR -8 | 1 | ||
| K32030 | SLING EQPT - HANDLIN | 1 | ||
| K32030-1 | SLING EQUIPMENT - HANDLING, NOSE LANDING GEAR (CE) | 5 | ||
| K32030-2 | TOOL | 1 | ||
| KEN-333-2030 | MAGNETIC BASE | 1 | ||
| KEN3332030K | MAGNETIC STAND | 1 | ||
| L320-300 | HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2) | 1 | ||
| L320-305 | HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2) | 1 | ||
| PWA32030 | TOOL | 1 | ||
| PWC32030 | PULLER | 2 | ||
| RBE332A93-3203-00 | Head Wrench | 2 | ||
| SC32030 | CASEIH 15/16 DP 6PT SKT 1/2 DR | 1 | ||
| SN32030 | NH 15/16 DP 6PT SKT 1/2 DR | 1 | ||
| T3203-001 | Stroke Fixture | 1 | ||
| T3203-003 | Lee Plug Fixture | 1 | ||
| T3203-005 | Sizing Ring | 1 | ||
| T3203-006 | Sizing Ring | 1 | ||
| T3203-009 | Support Ring | 1 | ||
| T3203-012 | Soldering Fixture | 1 | ||
| T3203-013 | Lee Plug Insertion | 1 | ||
| T3203-016 | Lee Plug Punch | 1 | ||
| T3203-017 | Solder Aid | 1 | ||
| T3203-021 | Seal Tool | 1 | ||
| T3203-022 | Seal Gun | 1 | ||
| T3203-024 | Torque Nest | 1 | ||
| T3203-026 | THIS IS NOT A TOOL | Not Available | Not Available |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
