| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 30-500 | CRIMP TOOL CRIMP MAASTER | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 30.5000.02 | HYGROMETER (CALIBRATION) | 1 | ||
| (CALIB) 355M03050000 | Test device (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | ||
| (CALIB) 98S21305001000 | TOOL I/F STATIC PORT-VACUUM PUMP | 1 | ||
| (CALIB) 98S21305002000 | VACUUM TEST TOOL FOR APS | 1 | ||
| (CALIB) 98S27305001000 | BOX TEST STICK PUSHER | 1 | ||
| (CALIB) 98S27305007000 | SPECIAL WRENCH KIT HORIZONTAL STABILISER | 1 | ||
| (CALIB) 98S52305001000 | PORTE CARGO | 1 | ||
| (CALIB) 98S52305004200 | FORWARD ENTRY DOOR DEBONDING | 1 | ||
| (CALIB) 98S52305004202 | FORWARD ENTRY DOOR DEBONDING | 1 | ||
| (CALIB) 98S52305005000 | OUTILLAGE REPARATION 4 POINTS | 1 | ||
| (CALIB) 98S52305007000 | TOOL REPARATION SEAL CARGO DOOR | 1 | ||
| (CALIB) 98S52305008200 | CARGO DOOR UNDER SKIN PIANO | 1 | ||
| (CALIB) 98S53305002200 | CALIBRATION STANDARD | 1 | ||
| (CALIB) 98S53305004000 | SKIN STRINGER CALIBRATION STANDARD-9635A3 | 1 | ||
| (CALIB) 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD-9635A4 | 1 | ||
| (CALIB) 98S53305006000 | HOUSING/HANDLING PROBE DEVICE | 1 | ||
| (CALIB) 98S54305001200 | CALIBRE D'INSPECTION | 1 | ||
| (CALIB) 98S54305001202 | CALIBRATION REFERENCE STANDARD | 1 | ||
| (CALIB) 98S54305002200 | CALIBRATION STANDARD | 1 | ||
| (CALIB) 98S55305001200 | PIN FOR INSTL VERTICAL FIN | 1 | ||
| 0000230500 | SEAL | 1 | ||
| 00061-2305-0001 | LOCKNUT WRENCH | 1 | ||
| 00061-2305-0001PM | WRENCH - BEARING LOCKNUT | 1 | ||
| 00166-305-000 | ROTATING WHEEL FOR HYDRAULIC JACK | 1 | ||
| 00305-003-000 | TOOL | 1 | ||
| 00432-305-000 | TOOL | 1 | ||
| 00432-305-0004 | SHEAR PIN | 1 | ||
| 00433-305-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 01-1305-0000 | Towbar, Steel Crj-700 (Ce) | 1 | ||
| 01473030500 | PLUG GAUGE | 1 | ||
| 01473030500/10 | PLUG GAUGE | 1 | ||
| 0292730500 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 03050004 | Screwdriver socket 1/2" 4mm L.60mm | 1 | ||
| 03050005 | Screwdriver socket 1/2" 5mm L.60mm | 1 | ||
| 03050006 | Screwdriver socket 1/2" 6mm L.60mm | 1 | ||
| 03050007 | Screwdriver socket 1/2" 7mm L.60mm | 1 | ||
| 03050008 | Screwdriver socket 1/2" 8mm L.60mm | 1 | ||
| 03050010 | Screwdriver socket 1/2" 10mm L.60mm | 1 | ||
| 03050012 | Screwdriver socket 1/2" 12mm L.60mm | 1 | ||
| 03050014 | Screwdriver socket 1/2" 14mm L.60mm | 1 | ||
| 03050017 | Screwdriver socket 1/2" 17mm L.60mm | 1 | ||
| 03050019 | Screwdriver socket 1/2" 19mm L.60mm | 1 | ||
| 07-130-500 | AN470 Double Offset Rivet Sets (Type: Flush) (Overall length: 5-1/2" (140 mm)) (Add to cart: Add To Cart) | 1 | ||
| 07-30-500 | RIVET SET AN426 RIVET FLAT 3.5" L .498" SH | 1 | ||
| 113.53 0-5000 | 0-5000 PSI GAUGE | 1 | ||
| 11305001 | OIL PUMP/DISPENSER, 5L, ENGINE OIL | 1 | ||
| 18903050000 | TEMPERATURE CHAMBER | 1 | ||
| 19-4305-0000 | CART, REPLENISHMENT POTABLE WATER-TANK | 10 | ||
| 19-4305-0000-A1 | PORTABLE WATER CART 220V/50, | 1 | ||
| 19-4305-0000SP | CART: POTABLE WATER,31GL, W/ELECTRIC PUMP,W/O HEATER | 1 | ||
| 213.53_0/5000PSI | GAUGE,213.53 | 1 | ||
| 226E030500 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 230-500 | TAIL ROTOR COVER | 1 | ||
| 230-5000 | 3FL 45 DEG STUB END MILL 1/2"DIA 5/8"LOC 2-1/2"OAL | 1 | ||
| 23050005 | IMPACT screwdriver socket 1/2" 5mm | 1 | ||
| 23050006 | IMPACT screwdriver socket 1/2" 6mm | 1 | ||
| 23050007 | IMPACT screwdriver socket 1/2" 7mm | 1 | ||
| 23050008 | IMPACT screwdriver socket 1/2" 8mm | 1 | ||
| 23050010 | IMPACT screwdriver socket 1/2" 10mm | 1 | ||
| 23050012 | IMPACT screwdriver socket 1/2" 12mm | 1 | ||
| 23050014 | IMPACT screwdriver socket 1/2" 14mm | 1 | ||
| 23050017 | IMPACT screwdriver socket 1/2" 17mm | 1 | ||
| 23050019 | IMPACT screwdriver socket 1/2" 19mm | 1 | ||
| 266EO30500 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 291-506-305-001 | TEST-SYSTEM,GENERIC | 1 | ||
| 30-5002 | THERMO-HYGROMETER | 2 | ||
| 30.5000.02 | THERMO-HYGROMETER | 1 | ||
| 305 001 251 016 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 305.003 | DIGITAL THERMOHYGROMETER (CALIBRABLE) | 1 | ||
| 3050004 | 1/2DR x 4mm INHEX SOCKET | 1 | ||
| 3050005 | 1/2DR x 5mm INHEX SOCKET | 1 | ||
| 3050006 | 1/2DR x 6mm INHEX SOCKET | 1 | ||
| 30500060 | COUNTERSINK CUTTERS W/INSERTED PILOT (CUTTER PILOT) PCD 3.17MM (RECOULES) | 1 | ||
| 3050007 | 1/2DR x 7mm INHEX SOCKET | 1 | ||
| 30500070 | COUNTERSINK CUTTERS W/INSERTED PILOT (CUTTER PILOT) PCD 3.96MM (RECOULES) | 1 | ||
| 3050008 | 1/2DR x 8mm INHEX SOCKET | 1 | ||
| 3050010 | 1/2DR x 10mm INHEX SOCKET | 1 | ||
| 30500100 | COUNTERSINK CUTTERS W/INSERTED PILOT (CUTTER PILOT) PCD 4.76MM (RECOULES) | 1 | ||
| 3050012 | 1/2DR x 12mm INHEX SOCKET | 1 | ||
| 3050014 | TORQUE SCREWDRIVER FOR SMALL VALVE CORES | 1 | ||
| 3050017 | 1/2DR x 17mm INHEX SOCKET | 1 | ||
| 3050019 | 1/2DR x 19mm INHEX SOCKET | 1 | ||
| 30500311 | COUNTERSINK CUTTERS W/INSERTED PILOT (CUTTER PILOT) PCD 2.4MM (RECOULES) | 1 | ||
| 30500405051 | REAMER | 1 | ||
| 30500501 | CHROME VANADIUM ADJUSTABLE HOOK WRENCH C SPANNER TOOL 19‐51MM | 1 | ||
| 330-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | ||
| 34191230500 | TAIL FITTING | 1 | ||
| 341A91-3305-00/PHP | JIGTRH MOUNTING | 1 | ||
| 341A91330500 | JIG TRH MOUNTING | 1 | ||
| 350A93-3305-00/20 | T/R G/B INPUT SOCKET | 1 | ||
| 350A93330500 | TGB AND MGB LOCK WRENCH | 1 | ||
| 355M03050000 | TESTER TRIM YAW RUDD | 1 | ||
| 4101305000 | CONTROL PANEL | 1 | ||
| 430-500 | TAIL ROTOR COVER | 1 | ||
| 4610030500 | EXTRACTOR - MOTOR, WHEEL BRAKE FAN | 8 | ||
| 4610030500-1 | TOOL | 1 | ||
| 6-53050-074 | TEST STATION | 1 | ||
| 6-53050-078 | MEASURING STATION | 1 | ||
| 6001305-001 | RACKS | 1 | ||
| 61042-03-05-001 | TOOL | 1 | ||
| 62203-0500 | 154 Way CMC Header Assembly PCB Insertion Fixture | 1 | ||
| 63823-0500 | Hand Crimp Tool for 2.80mm Pitch UCC2 Receptacle Terminal. | 1 | ||
| 64003-0500 | Hand Crimp Tool | 1 | ||
| 70307-03050-018 | FUEL SAMPLING TOOL | 1 | ||
| 703A91030500 | JACKING PAD | 1 | ||
| 704-0305-001 | INTERCONNECTING CABLE | 1 | ||
| 737-1305-000 | FUEL DRAIN | 1 | View Images / Tech Appraisal | |
| 846-130-500-1 | Engine Tool | 1 | ||
| 91V63-0-5000PSI-1/4NPTBTM | GAUGE PRESSURE 0-5000 PSI 63 MM FACE 1/4 | 1 | ||
| 91V63)0-500PSI) | 02 GAUGE LP | 1 | ||
| 93003-0500 | Selenoid | 1 | ||
| 93050-02C P02 | Slave Nuts | 1 | ||
| 9743050002 | BALL | 1 | ||
| 98821305001000 | EXT STATIC PORT CONNECTION | 1 | ||
| 98S21305000000 | Tool I/F ADC-Vacuum Pump | 1 | ||
| 98S2130500100 | EXT STATIC PORT CONNECTION | 1 | ||
| 98S21305001000 | Static Port-Pump Interface | 4 | ||
| 98S21305002000 | VACUUM TEST TOOL | 1 | ||
| 98S27305000000 | WRENCH | 2 | ||
| 98S27305001000 | Stick Pusher Box Test | 9 | ||
| 98S27305001000-REVB | STICK PUSHER BOX TEST | 1 | ||
| 98S27305005000 | Elevator Lever Drill Tool | 2 | ||
| 98S27305006004 | ELEVATOR | 1 | ||
| 98S27305007000 | Handle For Mechanism PFH | 3 | ||
| 98S27305007000-REVA | HANDLE FOR MECHANISM P.F.H. | 1 | ||
| 98S27305008000 | HAND WHEEL DRUM | 1 | ||
| 98S27305009-000 | DRILLING TOOL FOR SPRING TAB RETROFIT | 1 | ||
| 98S31305000 | TOOL | 1 | ||
| 98S31305000000 | Harness Position Transmet | 5 | ||
| 98S31305000000-REVA0 | HARNESS POSITION TRANSMETOR | 1 | ||
| 98S31305000000-REVB | HARNESS POSITION TRANSMETOR | 1 | ||
| 98S31305001 | TOOL | 1 | ||
| 98S31305001000 | Harness Trim Actuator | 3 | ||
| 98S31305001000-REVA0 | HARNESS TRIM ACTUATOR | 1 | ||
| 98S31305001000-REVB | HARNESS TRIM ACTUATOR | 1 | ||
| 98S37305000000 | SPECIAL EXTENSION "J" | 1 | ||
| 98S520305008-200 | ATR72 REFERENCE STANDARD PT 6 52-31-04 PAGE 603 FIGURE 601. Material: 2024-T62. Includes Test Report and Certificate of Conformance. | 1 | ||
| 98S52305001 | TOOL | 1 | ||
| 98S52305001000 | Hinge Cargo Door Replacemt | 3 | ||
| 98S52305001000-REVC | HINGE CARGO DOOR REPLACEMENT TOOL | 1 | ||
| 98S52305003000 | GABARIT | 1 | ||
| 98S52305003101 | TOOL | 1 | ||
| 98S52305003102 | TOOL | 1 | ||
| 98S52305003103 | SUPPORT | 1 | ||
| 98S52305003104 | SUPPORT | 1 | ||
| 98S52305003232 | PIN | 1 | ||
| 98S52305003239 | PIN | 1 | ||
| 98S52305003248 | SPACER | 1 | ||
| 98S52305003249 | SPACER | 1 | ||
| 98S52305003256 | PIN | 1 | ||
| 98S52305004 | TOOL | 1 | ||
| 98S52305004-200ALT | ATR CTS | 1 | ||
| 98S52305004-202ALT | ATR CTS | 1 | ||
| 98S52305004000 | TOOL | 1 | ||
| 98S52305004200 | Fwd Pax Door Debond Calibr | 3 | ||
| 98S52305004202 | Fwd Pax Door Debond Calibr | 3 | ||
| 98S52305005000 | Calibration Tool | 4 | ||
| 98S52305005000-REVB | CALIBRATION TOOL | 1 | ||
| 98S52305005002 | CALIBER INSPECTION | 1 | ||
| 98S52305007 | TOOL | 1 | ||
| 98S52305007000 | Repair Seal Cargo Door | 3 | ||
| 98S52305007000-REVA | TOOL REPARATION SEAL CARGO DOOR | 1 | ||
| 98S52305008000 | CARGO DOOR SKIN UNDER PIANO HINGE | 1 | ||
| 98S52305008200 | Cargo Door Skin Hinge Cal. | 2 | ||
| 98S52305009-000 | CALIBRATION STANDARD | 1 | ||
| 98S53305002 | TOOL | 1 | ||
| 98S53305002-200/19MM | ATR Standard w/ 19mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 thick | 1 | ||
| 98S53305002-200/23MM | ATR Standard w/ 23mm Lug Hole, ATR72 PT4 53-37-06:PG405 FIG401 SHEET2, 2024T3, .685 Thick | 1 | ||
| 98S53305002000 | TOOL | 1 | ||
| 98S53305002200 | Cargo Door Latch Calibr. | 4 | ||
| 98S53305002200-REVC | CALIBRATION STANDARD | 1 | ||
| 98S53305003000 | CALIBRATION STANDARD | 1 | ||
| 98S53305004 | TOOL | 1 | ||
| 98S53305004000 | Skin Str Calibration | 5 | ||
| 98S53305004ALT | ATR CTS | 1 | ||
| 98S53305005 | TOOL | 1 | ||
| 98S53305005-000ALT | ATR CTS | 1 | ||
| 98S53305005000 | Skin Str Calibration | 5 | ||
| 98S53305006 | TOOL | 1 | ||
| 98S53305006-000ALT | PROBE HANDLING DEVICES (2 PART KIT) | 1 | ||
| 98S53305006000 | Probe Housing Handling | 3 | ||
| 98S53305006001 | Probe Housing Handling | 1 | ||
| 98S53305006200 | HOUSING HANDLING PROBE DEVICE | 1 | ||
| 98S53305006202 | HOUSING HANDLING PROBE DEVICE | 1 | ||
| 98S53605305000 | SERVICE DOOR LOCK TOOL | 1 | ||
| 98S54305000-200 | PIN | 1 | ||
| 98S54305001 | TOOL | 1 | ||
| 98S54305001000 | TOOL | 1 | ||
| 98S54305001200 | Under Wing Box Calibration | 4 | ||
| 98S54305001200-REVC | NACEL. ATTACH FITT. WING RIBS 10 AND 12 | 1 | ||
| 98S54305001202 | Under Wing Box Calibration | 4 | ||
| 98S54305001202-REVC | NACEL. ATTACH FITT. WING RIBS 10 AND 12 | 1 | ||
| 98S54305002 | TOOL | 1 | ||
| 98S54305002-200 NDT | TOOL | 1 | ||
| 98S54305002000 | TOOL | 1 | ||
| 98S54305002200 | Templ Hull Nacelle Inspect | 5 | ||
| 98S543050022000 | CALIBRE DINSPECTION | 1 | ||
| 98S55305001200 | Pin For Fin Installation | 1 | ||
| 98S79305000000 | WRENCH | 1 | ||
| 98S79305001 | TOOL | 1 | ||
| 98S79305001000 | Reinforced "Crowsoop" Key | 12 | View Images / Tech Appraisal | |
| 98S79305001000-REVA | REINFORCED CROWSOOP KEY | 1 | ||
| 99A5300305001 | CALIBRATION STANDARD | 1 | ||
| 99A57103050000 | AIRBUS REFERENCE STANDARD A300-600 Part 4 57-10-64 Page 407/408 Figure 403 Material: 2024 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99F53303050000 | REFERENCE STD | 1 | ||
| 99F53307305001 | STANDARD, REFERENCE | 5 | ||
| 99F53307305001-GUIDE | GUIDE STRAP FOR 99F53307305001. 53-32-03-PB6 PG. 12, 500MM X 20MM X 2MM | 1 | ||
| 99F5710305000 | REFERENCE BLOCK | 1 | ||
| 99F57103050000 | REFERENCE STANDARD | 1 | ||
| 9A57103050000 | TOOL | 1 | ||
| A330-92305-0001 | EMERGENCY DOOR LOCKING DEVICE | 1 | ||
| AF305004 | GAUGE − FORCE 0 TO 50 LBF (0 − 222 N) OR EQUIVALENT; | 1 | ||
| ARP-1_25-_75/30-500H | PROBES | 1 | ||
| ARP-1_90/1_40/30-500H | PROBES | 1 | ||
| ARRFB30-.500SS/1.5WL | FLAT BOTTOM STAINLESS STEEL ROTARY PROBE WITH A 30° COIL ANGLE, .500"Ø USED WITH RA 2000 SCANNER. 1.5" WOIRKING LENGTH, SUPPLIED WITH A 4 PIN STEP LEMO, 100KHz-2MHz Includes Test Report and Certificate of Conformance. | 1 | ||
| ASI1305001 | CABLE | 1 | ||
| AURFB30-.500SS/2WL | STAINLESS STEEL UNIVERSAL FLAT BOTTOM ROTARY PROBE, 30° DEGREE COIL ANGLE, .500"Ø, 2.0" WORKING LENGTH SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | ||
| CA-30500 | TOWING BAR | 1 | ||
| CP30500 | TOW BAR - RB211 - 535 E4 | 1 | ||
| CP30500/1 | TOWBAR FOR CP30503/2 | 1 | ||
| E130-500 | PITOT COVER | 1 | ||
| F27305000 | TOOL-TEST | 1 | ||
| F70130-500 | Boeing | 1 | ||
| F71130-500 | SLING,AIRCRAFT MAINTENANCE | 1 | ||
| Gedore-030500 | Gedore 030500 4mm NUT SOCKET - NS 4 | 1 | ||
| IDL30-500 | 30-500 CRIMPMASTER CRIMP TOOL | 1 | ||
| LS03 05005 79512 | THIS IS NOT A TOOL | Not Available | Not Available | |
| LS03-05003-005 | THIS IS NOT A TOOL | Not Available | Not Available | |
| LS03-05003USBC1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| MW305-00DDL | Moore & Wright MW305-00DDL Digital Depth Micrometer Range 0-25mm/0-1" Resolution 0.001mm/0.00005" | 1 | ||
| MYTB767-27305-001 | 1 | |||
| NDT1093-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .050"/.040" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | ||
| NDT1099-063/050/025 | Boeing Standard | 1 | ||
| PA30-500 | LANDING GEAR COVERS (set of 3) | 1 | ||
| PH3050OBOOT | AIR HAMMER BOOT ORANGE | 1 | ||
| PWC30500 | tool | 1 | ||
| RC3050-05 | CARBIDE STAR DRILL | 1 | ||
| RDP1_25-_75/30-500H | PROBES | 1 | ||
| RDP1_9-1_4/30-500H | PROBES | 1 | ||
| RRT030500 | TOOL | 1 | ||
| RT13050-000 | JACK - AXLE | 1 | ||
| RT6-2024T3-.030/.500 | 6 Step Wedge .030", .080", .150", .300", .400", .500" , 2024T3 | 1 | ||
| RT6-2024T3-.030/.500-1 | 6 Step Wedge .030", .050", .100", .150", .300", .500" , 2024T3 1"x1" Pads | 1 | ||
| RT6-7075T3-.030/.500 | 6 Step Wedge .030:, .080", .150", .300", .400", .500", 7075T3 | 1 | ||
| RT6-7075T6-.030/.500 | 6 Step Wedge .75" X 4.5" .030 .050 .100 .150 .300 .500 7075T6 | 1 | ||
| RT6.75-2024T3-.030/.500 | 6 Step Wedge, .030, .100, .200, .300, .400, .500 thicknesses (+/- .0005), 6" x .75", 2024T3 | 1 | ||
| RT6.75-6AL4V-.030/.500 | 6 Step Wedge, .030, .100, .200, .300, .400, .500 thicknesses (+/- .0005), 6" x .75", 6AL4V Titanium | 1 | ||
| RT6.75-I600-.030/.500 | 6 Step Wedge, .030, .100, .200, .300, .400, .500 thicknesses (+/- .0005), 6" x .75", Inconel 600 | 1 | ||
| S305-002 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S3S20305000 | WRENCH | 1 | ||
| S53305006-000 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 1 | ||
| S53305006-001 | HOUSING/HANDLING DEVICE FOR PKA 19-5 PROBE | 1 | ||
| SC130-5004-1/16 | TWIST DRILL 0.0825 IN. CUTTING DIAMETER | 1 | ||
| T-1208030500 | 12x8x3 PLASTIC CASE - SEECRS | 1 | ||
| T5-8008-305-00 | TENSIOMETER | 1 | ||
| TED533-05-001 | LOOM SWITCH NO 2 ENGINE FIRE SHUT OFF | 1 | ||
| TM30500-2 | PLATE | 1 | ||
| TMH SD93-05-00 | (CFM56 ENGINE IDG - 772181 SERIE) | 1 | ||
| TR373-05004-00 | TBG, SST .25OD-.049W, | 1 | ||
| UT7030-500-4P | PIN TERMINAL JIG | 1 | ||
| Z280H3050000 | OUTLET A/C | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
