| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 30-300 | PlewsLubrimatic 30-300 Standard Duty Pistol Grease Gun | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 98A55303000000 | HOIST ASSY - FIN (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A55303000001 | BEAM BEAM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27303000001 | PLAY MEASUR.FOR ORAP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27303001001 | HOLDER SIDE STICK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27303003001 | CHECK TOOL-AILERON,ELEVATOR,RUDDER (CALIBRATION) | 1 | ||
| (CALIB) 98D27303004000 | ARTFLROD ARTIFICIAL FEEL ROD TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32303000000 | SOCKET WRENCH, SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53303002000 | FUEL. DOOR MACHIN. TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F12303000000 | CONNECTR CONNECTORS-HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F12303001000 | CONNECTR CONNECTOR HYDRAULIC HOSE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F24303000000 | TOOL R I BATTERY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27303000000 | ELEVATOR CHECK ELEVATOR-FREE PLAY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32303004001 | TOOL TOOL R I-ACTUATOR NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L24303000000 | DEVICE DEVICE,BATTERY REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L53303001000 | REMOVAL SET ABS 1505 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S55303001000 | VERTICAL STABILIZER | 1 | ||
| (CALIB) 98S57003030000 | LOAD RELIEF ADAPTOR | 1 | ||
| 001U323A3030000 | BRAKE BLEEDING KIT | 1 | ||
| 001U324A3030000 | TOOL | 1 | ||
| 0077130300 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 01583030000 | MANUAL BREAKER | 1 | ||
| 0298730300 | SUPPORT | 1 | ||
| 0303-0001-000 | SEAL KIT | 1 | ||
| 03030008 | Socket 1/2" 8mm L.38mm | 1 | ||
| 03030009 | Socket 1/2" 9mm L.38mm | 1 | ||
| 03030010 | Socket 1/2" 10mm L.38mm | 1 | ||
| 03030011 | Socket 1/2" 11mm L.38mm | 1 | ||
| 03030012 | Socket 1/2" 12mm L.38mm | 1 | ||
| 03030013 | Socket 1/2" 13mm L.38mm | 1 | ||
| 03030014 | Socket 1/2" 14mm L.38mm | 1 | ||
| 03030015 | Socket 1/2" 15mm L.38mm | 1 | ||
| 03030016 | Socket 1/2" 16mm L.38mm | 1 | ||
| 03030017 | Socket 1/2" 17mm L.38mm | 1 | ||
| 03030018 | Socket 1/2" 18mm L.38mm | 1 | ||
| 03030019 | Socket 1/2" 19mm L.38mm | 1 | ||
| 03030020 | Socket 1/2" 20mm L.42mm | 1 | ||
| 03030021 | Socket 1/2" 21mm L.42mm | 1 | ||
| 03030022 | Socket 1/2" 22mm L.42mm | 1 | ||
| 03030023 | Socket 1/2" 23mm L.42mm | 1 | ||
| 03030024 | Socket 1/2" 24mm L.42mm | 1 | ||
| 03030025 | Socket 1/2" 25mm L.42mm | 1 | ||
| 03030026 | Socket 1/2" 26mm L.42mm | 1 | ||
| 03030027 | Socket 1/2" 27mm L.45mm | 1 | ||
| 03030028 | Socket 1/2" 28mm L.45mm | 1 | ||
| 03030030 | Socket 1/2" 30mm L.45mm | 1 | ||
| 03030032 | Socket 1/2" 32mm L.47mm | 1 | ||
| 03030034 | Socket 1/2" 34mm L.47mm | 1 | ||
| 03030036 | Socket 1/2" 36mm L.52mm | 1 | ||
| 0319730300 | PIPE,DRAIN,FCU | 1 | ||
| 108-0303-001 | PLUG (BLACK) | 1 | ||
| 130-.300 | Boeing Thickness Standard, ALL PT6 53-50-00:PG14 FIG1 DETAIL VII, .300" Nominal | 1 | ||
| 13030002 | Adaptor 1/2"-3/8" L.35mm | 3 | ||
| 13030005 | Adaptor 1/2"-3/4" L.44mm | 2 | ||
| 13030010 | Adaptor 1/2"-3/4" L.22mm | 1 | ||
| 14-4303-0000 | CART, | 1 | ||
| 18−4303−0000 | Cart − Nitrogen (4 bottles) Charging Gauging High and Low Pressure | 6 | ||
| 19-4303-0000 | CART, POTABLE WATER 100 GL | 4 | ||
| 2000013-03-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 230-300 | ROTOR HUB COVER | 1 | ||
| 2303-003 | POWER PACK | 1 | ||
| 2411-123-03-009 | SWITCH SENSITIVE | 1 | ||
| 269T3303-003 | Pulley Assembly Installation/Alignment Tool | 1 | ||
| 269T9303-003 | Wrench, Upper Pulley Adjustment | 2 | ||
| 30-803-0300 | Sylvac 30-803-0300 S-Mike Pro Digital Micrometer Range 0-30mm | 1 | ||
| 303-000 | CANOPY COVER | 1 | ||
| 303-0001-05 | VALVE | 2 | ||
| 303-005 | EXTENDED CANOPY COVER | 1 | ||
| 30300-1284 | BRUSH | 1 | ||
| 30300015 | FIRE BOTTLE | 1 | ||
| 3030008 | 1/2DR x 8mm HEX SOCKET | 1 | ||
| 3030009 | 1/2DR x 9mm HEX SOCKET | 1 | ||
| 3030010 | 1/2DR x 10mm HEX SOCKET | 1 | ||
| 3030011 | 1/2DR X 11MM HEX SOCKET | 1 | ||
| 3030012 | 1/2DR x 12mm HEX SOCKET | 1 | ||
| 3030013 | 1/2DR X 13MM HEX SOCKET | 1 | ||
| 3030014 | 1/2DR x 14mm HEX SOCKET | 1 | ||
| 3030015 | 1/2DR x 15mm HEX SOCKET | 1 | ||
| 3030016 | 1/2DR x 16mm HEX SOCKET | 1 | ||
| 3030017 | 1/2DR x 17mm HEX SOCKET | 1 | ||
| 3030018 | 1/2DR x 18mm HEX SOCKET | 1 | ||
| 3030019 | 1/2DR x 19mm HEX SOCKET | 1 | ||
| 3030020 | 1/2DR x 20mm HEX SOCKET | 1 | ||
| 3030021 | 1/2DR x 21mm HEX SOCKET | 1 | ||
| 3030022 | 1/2DR x 22mm HEX SOCKET | 1 | ||
| 3030023 | 1/2DR X 23MM HEX SOCKET | 1 | ||
| 3030024 | 1/2DR x 24mm HEX SOCKET | 1 | ||
| 3030025 | 1/2DR x 25mm HEX SOCKET | 1 | ||
| 3030026 | 1/2DR x 26mm HEX SOCKET | 1 | ||
| 3030027 | 1/2DR x27mm HEX SOCKET | 1 | ||
| 3030028 | 1/2DR x 28mm HEX SOCKET | 1 | ||
| 3030030 | 1/2DR x 30mm HEX SOCKET | 1 | ||
| 3030032 | 1/2DR x 32mm HEX SOCKET | 1 | ||
| 3030034 | 1/2DR x 34mm HEX SOCKET | 1 | ||
| 3030036 | 1/2DR x 36mm HEX SOCKET | 1 | ||
| 3123030-01 | VALVE Y | 2 | ||
| 330-300 | MAIN ROTOR HUB COVER | 1 | ||
| 3303-0002-004-M | TOWEYE SHAFT | 1 | ||
| 3303-0002-004-ML | MFD PARTS FOR -3303-0002-004 | 1 | ||
| 3303-0002-006-M | STOP COLLAR | 1 | ||
| 3303-0002-006-ML | MFD PARTS FOR -3303-0002-006 | 1 | ||
| 3303-0003-001-ML | MFD PARTS FOR 3303-0003-001 | 1 | ||
| 3303-0003-007-M | MAIN AXLE | 1 | ||
| 3303-0003-008-M | PIN | 1 | ||
| 3303-0004-002-CM | MOUNT FLANGE | 1 | ||
| 3303-0005-003-CM | MOUNTING FLANGE | 1 | ||
| 3303-0005-008-M | TOWHEAD BODY | 1 | ||
| 3303-0005-009-M | TOWHEAD CLAW | 1 | ||
| 3303-0005-010-M | TOWHEAD CLAW | 1 | ||
| 3303-0005-025-CM | 375 THK A36 STEEL | 1 | ||
| 3303-0005-027-CM | 375 THK A36 STEEL | 1 | ||
| 3303-0005-029-CM | 3125 THK 4140 STEEL | 1 | ||
| 3303-0005-033-CM | 375 THK A36 STEEL | 1 | ||
| 3303-0005-038-M | CLEVIS PIN | 1 | ||
| 3303-0005-100 | TOW BAR | 1 | ||
| 33030002 | IMPACT reduction 1/2"-3/8" L.37mm | 1 | ||
| 33030005 | IMPACT enlargement 1/2"-3/4" L.49mm | 1 | ||
| 332A93-3303-00 | VERIFICATION TOOL | 1 | ||
| 3530300 | PINGER TEST SET | 1 | ||
| 3530300-500 | PINGER TEST SET | 1 | ||
| 430-300 | ROTOR HUB COVER | 1 | ||
| 43030005 | Wheel brace 24,27,32 1/4" L.400mm | 1 | ||
| 43030006 | Wheel brace 17,19,22 1/2" L.400mm | 1 | ||
| 46303000 | Screwdriver PH0 L.60mm | 1 | ||
| 46303001 | Screwdriver PH1 L.80mm | 1 | ||
| 46303002 | Screwdriver PH2 L.100mm | 1 | ||
| 46303003 | Screwdriver PH3 L.150mm | 1 | ||
| 514 / 13030005 | ADAPTOR SOCKET 1/2" x PLUG 3/4" | 1 | ||
| 536-103 0-300 0,08 | MITUTOYO | 1 | ||
| 6001303-001 | RATCHET TYPE CRIMP TOOL | 1 | ||
| 6030-3001 | LED PORTABLE STRING LIGHT | 1 | ||
| 62203-0300 | Press-In Tool | 1 | ||
| 630-3000-13GSE | TOOL | 1 | ||
| 63823-0300 | Hand Crimp Tool for Receptacle Terminal Unsealed | 1 | ||
| 64000F25273030000-B0 | Pads kit for lateral hatracks | 1 | ||
| 64600F25290303000-A0 | Equerre laser de positionnement PSU | 1 | ||
| 703A93-0300-00 | BEARING EXTRACTOR | 1 | ||
| 7075-3-0-300 | CALIBRATION BLOCK | 1 | ||
| 846-130-300-5 | Engine Tool | 1 | ||
| 8D27303000001 | TOOL | 1 | ||
| 95000F00000303000 | Cargo (1 & 2) doors rear strut | 1 | ||
| 9560130300 | PIPE | 1 | ||
| 98827303003001 | DIAL INDICATOR | 1 | ||
| 98A27303000000 | BAR-LKG,AIL,ELEV,RUD CTL CA REG | 1 | View Images / Tech Appraisal | |
| 98A27303000001 | PIN | 1 | View Images / Tech Appraisal | |
| 98A27303001000 | TOOL-LOCKING,ELEVATOR | 3 | ||
| 98A27303002000 | CENTERING BULLETS AND PINS - ELEVATOR HINGE PINS | 8 | ||
| 98A27303002100 | CENTERING BOLT | 1 | ||
| 98A27303002301 | CENTERING BULLET | 1 | ||
| 98A27303002302 | CENTERING PIN | 1 | ||
| 98A27303002401 | CENTERING BOLT | 1 | ||
| 98A27303002402 | Centering bullet | 1 | ||
| 98A27407530300 | CLAMP JAW COMPLETE | 1 | ||
| 98A28108303000 | CONTAINER, STOWAGE - R/I, ACT | 1 | ||
| 98A32303000 | TOOL | 1 | ||
| 98A32303000000 | WEDGE-LOCKING,M.L.G.EMERGENCY CONT. CABLE TENSION REG | 3 | ||
| 98A32303001000 | EXTRACTOR-HINGE BOLT,ACTUATING CYLINDER,MAIN DOOR,N.G | 7 | View Images / Tech Appraisal | |
| 98A32303001200 | NUT | 1 | ||
| 98A32303002000 | PIN-RIGGING,MAIN GEAR DOOR SELECTOR CONTROL | 8 | View Images / Tech Appraisal | |
| 98A32303002200 | PIN | 1 | ||
| 98A54303000000 | SETTING TOOL-FWD PRESSURE RELIEF DOOR | 1 | ||
| 98A54303005040 | TOOL | 1 | ||
| 98A54303005042 | TOOL | 1 | ||
| 98A54303005100 | TOOL | 1 | ||
| 98A55303000000 | HOIST-ASSY FIN | 1 | ||
| 98A55303001000 | JIG-STOKAGE | 1 | ||
| 98A55303002000 | STABILIZER SPAR BOX | 1 | ||
| 98A55303003000 | JACK | 1 | ||
| 98A55303004000 | SLINGSET | 1 | ||
| 98A55303005000 | ANGLE INDICATOR | 1 | ||
| 98A55303006000 | STORAGE VERT STAB BX | 1 | ||
| 98A57103030000 | PLATE-STANDARD DRILLING | 1 | ||
| 98A78303001000 | DRILLING OF THRUST REVERSER CONTROL LEVER | 1 | ||
| 98D12303000000 | ENGINE COVER | 1 | ||
| 98D12303001000 | AIR INTAKE HIGHLIGHTE | 1 | ||
| 98D27303000 | LOAD APPLICATION TOOL ELEVATOR RUDDER | 1 | ||
| 98D27303000000 | TOOL | 1 | ||
| 98D273030000001 | ELEVATOR PLAY CHECK | 1 | ||
| 98D27303000001 | LOAD,APPLICATION TOOL-ELEVATOR, AILERON, RUDDER | 31 | View Images / Tech Appraisal | |
| 98D27303000001 REV E | LOAD APPLICATOR | 1 | ||
| 98D273030000011 | TOOL | 1 | ||
| 98D27303000007 | GAUGE ASSY PUSH PULL | 1 | ||
| 98D2730300001 | TOOL | 1 | ||
| 98D27303000100 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | ||
| 98D27303000102 | ALIGNER | 2 | ||
| 98D27303000102-209 | TOOL KIT | 1 | ||
| 98D27303000200 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | ||
| 98D27303000201 | LINK | 3 | ||
| 98D27303000202 | UPPER PLATE & LINK | 1 | ||
| 98D27303000203 | RUBBER | 1 | ||
| 98D27303000204 | SCREW TIGHTING | 2 | ||
| 98D27303000205 | TOOL | 1 | ||
| 98D27303000206 | BOLT BOLT | 1 | ||
| 98D27303000209 | INDEX | 1 | ||
| 98D27303000215 | LOAD,APPLICATION TOOL-ELEVATOR,AILERON,RUDDER | 1 | ||
| 98D27303001 | TOOL | 1 | ||
| 98D27303001000 | HOLDER-SIDE STICK | 3 | ||
| 98D27303001001 | HOLDER - SIDE STICK | 17 | ||
| 98D27303001200 | COLUNNE | 1 | ||
| 98D27303001202 | GROUND PLATE | 1 | ||
| 98D27303001204 | UPPER PLATE | 2 | ||
| 98D27303001205 | TOOL | 1 | ||
| 98D27303001206 | KNURLED THUMB SCREW | 1 | ||
| 98D27303001208 | KNURLED BOLT | 1 | ||
| 98D2730300204 | TOOL | 1 | ||
| 98D27303003 | TOOL | 1 | ||
| 98D27303003000 | CHECK TOOL-AILERON,ELEVATOR,RUDDER | 4 | ||
| 98D27303003001 | CHECK TOOL (ANALOG)-AILERON,ELEVATOR,RUDDER | 24 | View Images / Tech Appraisal | |
| 98D273030030011 | TOOL | 1 | ||
| 98D27303003100 | CHECK TOOL-AILERON SERVO CTL OSCILLATION | 5 | ||
| 98D27303003101 | CHECK TOOL-AILERON,ELEVATOR,RUDDER | 1 | ||
| 98D27303003201 | KNOB SHOE-KNOB | 1 | ||
| 98D27303003202 | TOOL | 3 | ||
| 98D27303003203 | ARM | 1 | ||
| 98D27303003204 | SUPPORT SUPPORT | 1 | ||
| 98D27303003205 | ARM | 1 | ||
| 98D27303003206 | CLIP CLIP SUCTION | 1 | ||
| 98D27303003207 | Pin assy | 1 | ||
| 98D27303003209 | Pin assy | 1 | ||
| 98D27303004 | TOOL | 1 | ||
| 98D27303004000 | TOOL-ARTIFICIAL FEEL RODS | 11 | ||
| 98D27303005000 | GAP MEASUREMENT-PITCH SHAFT | 1 | ||
| 98D27303006 | TOOL | 1 | ||
| 98D27303006000 | SUPPORT-ROLL STOP ADJUSTMENT | 1 | ||
| 98D27303007 | TOOL | 1 | ||
| 98D27303007000 | DRILL-TOOL SOL | 1 | ||
| 98D27303008 | TOOL | 1 | ||
| 98D27303008000 | DRILLING TOOL-SIDE STICK ASSEMBLY | 1 | ||
| 98D27303009 | TOOL | 1 | ||
| 98D27303009000 | SUPPORT-SIDE STICK | 1 | ||
| 98D27303009001 | TOOL | 1 | ||
| 98D31303000003 | MAINTENANCE FILTER TOOL FOR A320 | 1 | ||
| 98D31303000004 | MAINTENANCE FILTER TOOL FOR A320 | 1 | ||
| 98D31303000005 | MAINTENANCE FILTER TOOL | 1 | ||
| 98D32303000 | TOOL | 1 | ||
| 98D323030000 | ADAPTER-WRENCH KIT | 1 | ||
| 98D3230300000 | Socket Set NLG | 1 | ||
| 98D32303000000 | ADAPTER-WRENCH | 26 | View Images / Tech Appraisal | |
| 98D32303000001 | TOOL | 1 | ||
| 98D32303000200 | ADAPTER | 5 | ||
| 98D32303000201 | Adaptor wrench | 9 | ||
| 98D32303000202 | ADAPTER-WRENCH | 2 | ||
| 98D32303001 | TOOL | 1 | ||
| 98D32303001000 | TOOL | 1 | ||
| 98D32303002000 | PIN RIGGIN-PIN NOSE GDO | 1 | ||
| 98D52303000000 | TOOL-INSTALLATION FWD CARGO DOOR HINGE | 1 | ||
| 98D53303000 | TOOL | 1 | ||
| 98D53303000000 | TEMPLAT DRILL | 2 | ||
| 98D53303000200 | Location Plate | 1 | ||
| 98D53303000202 | Location Plate | 1 | ||
| 98D53303000204 | Location Plate | 1 | ||
| 98D53303002 | TOOL | 1 | ||
| 98D5330300200 | NDT BLOCK TOOL | 1 | ||
| 98D53303002000 | FUEL -1 DOOR MACHINING TOOL | 2 | ||
| 98D5330300202 | NDT BLOCK TOOL | 1 | ||
| 98D5330300204 | NDT BLOCK TOOL | 1 | ||
| 98D53303002206 | DRILL BUSHING | 1 | ||
| 98D53303002218 | DRILLING GRID, SMALL | 1 | ||
| 98D71103030030 | TOOL | 1 | ||
| 98D7110303003000 | CFM FAN COWL FLAG | 1 | ||
| 98F12303000 | TOOL | 1 | ||
| 98F12303000000 | CONNECTORS-HYDRAULIC | 5 | ||
| 98F12303001 | TOOL | 1 | ||
| 98F12303001000 | CONNECTOR HYDRAULIC HOSE | 10 | ||
| 98F12303001001 | Tool | 1 | ||
| 98F12303002 | TOOL | 1 | ||
| 98F12303002000 | HYDRAULIC POWER UNIT EXTERNAL | 2 | View Images / Tech Appraisal | |
| 98F12303006 | TOOL | 1 | ||
| 98F12303006000 | ROPE,KIT-SAFETY | 1 | ||
| 98F12303006001 | ROPE, KIT-SAFETY | 1 | ||
| 98F24303000 | TOOL | 1 | ||
| 98F24303000000 | R I BATTERY | 7 | ||
| 98F27303000 | TOOL | 1 | ||
| 98F27303000000 | CHECK ELEVATOR-FREE PLAY | 4 | ||
| 98F27303000204 | BLOCK | 1 | ||
| 98F27303000208 | AXLE | 1 | ||
| 98F27303000218 | HOLDER | 1 | ||
| 98F27303000220 | CENTRAL AXIS | 1 | ||
| 98F27303000224 | BOLT | 1 | ||
| 98F27303000228 | HOLDER | 1 | ||
| 98F27303000230 | POINT | 1 | ||
| 98F27303001 | TOOL | 1 | ||
| 98F27303001000 | ELEVATOR FREE PLAY | 1 | ||
| 98F32303000 | TOOL | 1 | ||
| 98F32303000000 | POSITIONING TOOL-MLG UPLOCK | 8 | ||
| 98F32303001 | TOOL | 1 | ||
| 98F32303001000 | SPANNER-SOCKET | 11 | ||
| 98F32303001001 | SPANNER-SOCKET | 4 | ||
| 98F32303001200 | SOCKET WRENCH | 1 | ||
| 98F32303001201 | Socket-spanner | 1 | ||
| 98F32303001202 | Socket-spanner | 1 | ||
| 98F32303002 | TOOL | 1 | ||
| 98F32303002000 | SOCKET SPANNER | 5 | ||
| 98F32303003000 | GUIDE,CONE-PINTLE PIN CLG | 1 | ||
| 98F32303004 | TOOL | 1 | ||
| 98F32303004000 | TOOL R I-ACTUATOR NLG | 1 | ||
| 98F32303004001 | TOOL R I-ACTUATOR NLG | 4 | ||
| 98F32303004230 | FORK | 1 | ||
| 98F53303000000 | DRILLING TOOL | 1 | ||
| 98F53303000001 | DRILLTL DRILLING TOO | 1 | ||
| 98F53303001000 | POSITION-BELLY FAIR. | 1 | ||
| 98F53303002000 | KEEL BEAM HANDLING TOOL | 1 | ||
| 98F54003030000 | CANTILEVER TOOL - A340-500 -600 | 1 | ||
| 98F54503030000 | BEARING UPPER BEARING PROTECT | 1 | ||
| 98L24303000 | TOOL | 1 | ||
| 98L24303000000 | DEVICE,BATTERY REMOVAL INSTALLATION | 9 | ||
| 98L53303001 | TOOL | 1 | ||
| 98L53303001000 | REMOVAL SET ABS 1505 | 1 | ||
| 98S27303000000 | TEST TOOL | 1 | ||
| 98S55303001000 | Vertical Stabilizer R/I | 5 | ||
| 98S55303001000-REVA0 | HOISTING RIG | 1 | ||
| 98S57003030000 | Adapter Load Relief RIB 13 | 5 | ||
| 98S57003030000-REVA0 | ADAPTER LOAD RELIEF RIB 13 | 1 | ||
| 9913030051 | SCREW | 1 | ||
| 9913030081 | SCREW | 1 | ||
| 99A31303005000 | ENGINE-PARAMETER TEST SET | 1 | ||
| 99A51307303000 | STANDARD, CALIBRATION | 1 | ||
| 99A53303006000 | REFERENCE STANDARD | 1 | ||
| 99A57103030000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-06 PAGE 405 FIGURE 404. Includes Test Report and Certificate of Conformance. | 4 | ||
| 99A57303000000 | REFERENCE STANDARD | 1 | ||
| 99D31303000000 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D31303000002 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D31303000003 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D31303000004 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D31303000005 | TOOL | 1 | ||
| 99D31303000006 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D51303001000 | NDT CALIBRATION BLOCK | 1 | ||
| 99D51303002000 | ULTRASONIC THICKNESS GAUGE TEST BLOCK | 1 | ||
| 99D532303000002 | REF STD | 1 | ||
| 99D53230300002 | REF STD | 1 | ||
| 99D54403030000 | Reference Standards | 1 | ||
| 99D57103030000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99F53303000000 | REFERENCE STANDARD | 1 | ||
| 99F53303000001 | AIRBUS CALIBRATION STANDARD A340-200/-300 FIGURE 53-31-39-991-003-A. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99F53303001000 | REFERENCE STANDARD | 1 | ||
| 99F53303001001 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99F533030011000 | REFERENCE STANDARD | 1 | ||
| 99F53303002000 | STANDARD,REFERENCE | 1 | ||
| 99F53303002900 | TOOL | 1 | ||
| 99F533030029000 | TOOL | 1 | ||
| 99F53303003000 | REFERENCE STANDARD | 1 | ||
| 99F53303003001 | REFERENCE STANDARD | 1 | ||
| 99F53303004000 | REFERENCE STANDARD | 1 | ||
| 99F53303005000 | STANDARD,REFERENCE | 2 | ||
| 99F53303006000 | REFERENCE STANDARD | 1 | ||
| 99F53303007000 | STANDARD REFERENCE | 1 | ||
| 99F53303008000 | STANDARD,REFERENCE | 1 | ||
| 99F53303008001 | BLOCK-REFERENCE | 2 | ||
| 99F53303009000 | STANDARD,REFERENCE | 1 | ||
| 99F53303030000 | AIRBUS REFERENCE STANDARD A330 Part 6 53-30-19 Page 605/606 Figure 603. Material: 2024-T3 Clad. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99F53303030000-GUIDE | Guide Strap for 99F53303030000, A330, 53-30-19-PB6 PG 9 FIG 53-30-19-991-003-A SHEET 01, 500mm long, 20mm wide, 2mm thick Plexiglass | 1 | ||
| 99F57103030000 | BLOCK-REFERENCE | 1 | ||
| 99L53303000000 | AIRBUS REFERENCE STANDARD A380 53-31-37-991-006-A. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L53303001000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303002000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303003000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303004000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303005000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303006000 | REFERENCE BLOCK | 1 | ||
| 99L53303007000 | REFERENCE BLOCK | 1 | ||
| 99L53303008000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303009000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-31-20-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L53303030000 | AIRBUS REFERENCE STANDARD A380-800 53-31-62-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99V51303001000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99V51303002000 | NDT NDT CALIBRATION | 1 | ||
| 99V53303003000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99V533030040 00 | NDT NDT CALIBRATION BLOCK | 1 | ||
| AAH334303001 | REGULATOR FOR YA217A | 1 | ||
| AFNDT-2030/300M | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | ||
| AP7121430300 | AVDEL NG2 WITH 1/8" MBC NOSE T | 1 | ||
| ARM018030300 | HELICOIL EXTRACT TOOL 18-22MM | 1 | ||
| AW233030006-101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| C130-300 | CENTER CONSOLE COVER (standard color: Black), NSN: 1680-01-592-8492 | 1 | ||
| C23102-303-001 | PLATE | 1 | ||
| D3215303000200 | PIN | 1 | ||
| D3215303000400 | PIN | 1 | ||
| D3215303000600 | PIN | 1 | ||
| D3215303000800 | PIN | 1 | ||
| D3215303000801 | THIS IS NOT A TOOL | Not Available | Not Available | |
| ELS30-300-A-TOOLMOD | 1/4" SQ Drive Replacement | 1 | ||
| F27303000 | JAWS-FALSE | 1 | ||
| FMM-130-30010-B | MANDREL CHECK FIXTURE | 1 | ||
| Gedore-030300 | Gedore 030300 IB 093 HEX BIT 3/32'' | 1 | ||
| H6M3-03-00 | RATCHET ASSEMBLY, | 2 | ||
| HC-17830/3000PSI | MODEL 14-6831-6010 , TRONAIR 0/3000PSI | 1 | ||
| HCS 2083-03-005 | PORTABLE ELECTRIC SCALE | 1 | ||
| ICPT-1303001 | PORTABLE CUTTING TOOL CUTTER HEAD | 1 | ||
| L1SWU0200H30300 | BUS MATRIX MODULE | 1 | ||
| L30-300 | WING COVERS (35-A) (set of 2) | 1 | ||
| MTOO02-10-359303-000 | Reparación util | 1 | ||
| MTOO03-10-359303-000 | Reparación util | 1 | ||
| MTOO09-10-359303-000 | Reparación util | 1 | ||
| P3-03-0036-001 | TEST UNIT: RLBT1-B, RLBT1-C | 1 | ||
| P3-03-0044-001 | SPT PROGRAMMING TOOL | 1 | ||
| PA30-300 | HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2) | 1 | ||
| PWC30300 | tool | 1 | ||
| RMF23030-08.000H6X35X25 | PIN | 1 | ||
| SPG-63-0300P | 0-300 BAR PRESSURE GAUGE | 1 | ||
| ST1257B-1930-300-2-428 | STRAIGHT SHANK,MULTI-END,CARBIDE,4 FLUT ( 0.1930'' ) | 1 | ||
| ST1257B-2030-300-2-428 | STRAIGHT SHANK,MULTI-END,CARBIDE,4 FLUT ( 0.2030'' ) | 1 | ||
| T3030024 | VARIABLE ADAPTER | 1 | ||
| T3030024-156 | VARIABLE ADAPTER | 1 | ||
| TB30-300 | HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2) | 1 | ||
| TMH BSC13-03-00 | LEFT HAND ARM | 1 | ||
| TMHSD93-03-00 | (V2500 ENGINE IDG - 772292 SERIE) | 1 | ||
| XP1530-300W | LIGHT,EXPLOSION-PROOF | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
