| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 25-500 | HIGH PRESSURE REGULATOR | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) D01255-001 | TRIPOD JACK, TAIL (A380) (CALIBRATION) (CALIBRATION) | 1 | |
| 00422-255-000 | BALL HEAD | 1 | |
| 00432-550-000 | TOOL | 1 | |
| 006.255.0001 | TOOL | 1 | |
| 006.255.0010 | PLASTIC JAW WITH INSERT PIECE, COD ART | 1 | |
| 116-102 25-50 0,01 | MITUTOYO | 1 | |
| 145-186 25-50 0,01 | MITUTOYO | 1 | |
| 25-500-30-100-PSI-KPA | 1/2“ GAUGE 500 SERIES GLYCERIN FILLED 1/4” 316SS | 1 | |
| 2550015 | TEST FITTING | 1 | |
| 2550022 | MOLD - PUTTING | 1 | |
| 2550025 | Adapter | 1 | |
| 2550032 | Fixture | 1 | |
| 2550037 | Wrench | 1 | |
| 2550038 | Adapter | 1 | |
| 2550066 | HOLDING TOOL | 1 | |
| 2550097 | Adapter | 1 | |
| 25500C-580 | HIGH - HIGH REGULATOR | 2 | |
| 3255-0001W01 | CALIBRATING SLEEVE | 1 | |
| 32550.0957 | TD200 TEXT DISPLAY | 1 | |
| 332A32-2550-00 | MGB HOUSING,ASSY | 1 | |
| 444-65255-000 | SPECIAL TOOL | 1 | |
| 4441255-000 | TOOL | 1 | |
| 4611025500 | DEBRIS GUARD CONTROL TOOL | 1 | |
| 5225-500 | THIS IS NOT A TOOL | Not Available | Not Available |
| 57022-5500 | Handtool (Straight Action) | 1 | |
| 57325-5000 | Hand Crimper | 1 | |
| 58255004 | 725/4B-REVERSIBLE BIT RATCHET | 1 | |
| 58255005 | 725/5B-BIT RATCHET INSERT TOOL | 1 | |
| 63825-5000 | Hand Crimp Tool for 2.50mm Pitch Floating Wire-to-Board Plug Crimp Terminal | 1 | |
| 7322550081 | DOWEL FOR MOUNTING TORQUE | 1 | |
| 74-225-500-0 | DIGITAL TIRE TREAD GUAGE | 1 | |
| 82550086-007 | THIS IS NOT A TOOL | Not Available | Not Available |
| 8522-0255-001 | SEAL ASSY ESCAPE HATC | 1 | |
| 92550-01806-103 | THIS IS NOT A TOOL | Not Available | Not Available |
| 983-4255-003 | TOOL | 1 | |
| 98A55407525500 | HOIST WIRE LEFT | 1 | |
| 98F27808255000 | TOOL | 1 | |
| 98F27808255001 | BLOCK - SLAT GAPPING | 7 | |
| A2528255009000 | COVER ASSY | 1 | |
| AC21825500 | TOOL FOR CHECKING THE THERMAL RELIEF VALVE | 1 | |
| ACT-4AS2550003-450 | MLG WHEEL ANTI SKID FIXTURE | 1 | |
| AE62550-03 | THIS IS NOT A TOOL | Not Available | Not Available |
| AE62550-04 | THIS IS NOT A TOOL | Not Available | Not Available |
| AE62550-05 | THIS IS NOT A TOOL | Not Available | Not Available |
| AE62550-06 | THIS IS NOT A TOOL | Not Available | Not Available |
| AE62550-08 | THIS IS NOT A TOOL | Not Available | Not Available |
| AF-5225/500K | RIGID SURFACE PROBE .062"Ø TUBING ABS SHIELDED 90°, 60° Joggle.020" DROP, 6.0" LONG, , 500KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance. Reference: MD-11 Section 2-2 figure 2.4 PG.4 | 1 | |
| AG/FB70-025-500S | A320/A321 TOWBAR HEAD | 1 | |
| AMHY-.500-.625/500K | ADJUSTABLE MANUAL BOLT HOLE "Y"-PROBE WITH COLLAR 500KHz-1MHz, .500"-.625"OD. 1.5" WORKING LENGTH, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.90-.25/500HZ | LOW FREQUENCY REFLECTION RING PROBE 500Hz- 5KHz, .250"Ø ID x .900"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AS-1525-500 | BUFFER SOLUTION PH 10 (BLUE) 500 ML | 1 | |
| ATMHF.125/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .120" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATMHF.625/500K | MANUAL BOLT HOLE PROBE 500KHZ-1MHZ, FERRITE SHIELDED, ABS COIL, SPLIT END, .625" OD, 3.5" OVERALL LENGTH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-2.000-2.125/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 2.000"-2.125"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-3.500-3.625/500K | ADJUSTABLE ROTARY X-PROBE, 100KHz-1MHz, SPILT END, 3.500"-3.625"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| BC25500P | BATTERY BOOS | 1 | |
| BC25500PA | 25FT TRUCK MOUNT BOOSTER CABLE | 1 | |
| BC25500PA-1R | 25FT CABLE CLAMPS PLUG ASSMBLY | 1 | |
| BC25500PA-2R | 5FT TRUCK MOUNT CBLE PLUG ASSY | 1 | |
| BC25500PA-3R | HANDLE ASSEMBLY W/HARDWARE | 1 | |
| BC25500PA-4R | WEATHER CAP | 1 | |
| D01255-001 | TOOL | 1 | |
| D12550-022 | ACTUATOR | 1 | |
| D12550-031 | ACTUATOR | 1 | |
| D92550038-02 | PLUG | 1 | |
| DPG7025-500 | DIGITAL PRESSURE GAUGE, 0-500 PSI RANGE | 1 | |
| DT-1.25/500K-1M | Pencil Probe, Detachable, 500KHz-1MHz | 1 | |
| F27255000 | TOOL | 1 | |
| FB70-025-500 | TOWBAR HEAD ASSY A320 DURAL | 1 | |
| FB70-025-500S | A320 Tow Bar Head Assembly | 1 | |
| FOW74-225-500 | DIGITAL TIRE TREAD GUAGE | 1 | |
| GEN-25-5001025-101 | MAIN WHEEL NET | 1 | |
| HF625500TX10 | TORX SCREWDRIVER | 1 | |
| HF625500TX6 | TORX SCREWDRIVER | 1 | |
| HF625500TX7 | TORX SCREWDRIVER | 1 | |
| HF625500TX8 | TORX SCREWDRIVER | 1 | |
| HF625500TX9 | TORX SCREWDRIVER | 1 | |
| KEN6025500K | METRIC ALLEN KEY/ CABIN TAP KIT | 1 | |
| L00PEN92-5/500K | .100" Straight Surface Probe, .2 drop 5" long, 500KHZ with 25 deg. bend, L00 connector | 1 | |
| MH.125/500K | .125" (1/8") Manual Hole Probe, 500KHz | 1 | |
| MH.625/500K | .625" (5/8") Manual Hole Probe, 100KHz-1MHz, Microdot Connector | 1 | |
| OET25500000 | OET NIP SERIE A1 G1/8BU | 1 | |
| OET25500001 | NIPPEL-A1 G1/4" UITW ST | 1 | |
| OET25500005 | NIPPEL-A1 G1/4" INW ST | 1 | |
| OET25500008 | OET NIP SERIE A1 SL06MM | 1 | |
| OET25500009 | NIPPEL-A1 SLANGP 8MM ST | 1 | |
| OET25500010 | NIPPEL-A1 SLANGP 10MM ST | 1 | |
| OET25500012 | NIPPEL-B1 G 1/4" UITW ST | 1 | |
| OET25500016 | OET NIP SERIE B1 G2/BI | 1 | |
| OET25500019 | OET NIP SERIE B1 SLO6MM | 1 | |
| OET25500020 | OET NIP SERIE B1 SL08MM | 1 | |
| OET25500021 | OET NIP SERIE B1 SL10MM | 1 | |
| OET25500023 | NIPPEL-C G1/4" UITW ST | 1 | |
| OET25500024 | OET NIP SERIE C G3/8BU | 1 | |
| OET25500026 | NIPPEL-C G 1/4" INW ST | 1 | |
| OET25500027 | OET NIP SERIE C G3/8BI | 1 | |
| OET25500029 | OET NIP SERIE C SL08MM | 1 | |
| OET25500030 | OET NIP SERIE C SL10MM | 1 | |
| OET25500031 | OET NIP SERIE C SL13MM | 1 | |
| OET25500032 | NIPPEL-D/DL G1/4" UITW ST | 1 | |
| OET25500041 | NIPPEL-E G1/4" UITW ST | 1 | |
| OET25500042 | G3/8"NIPPLE EXTERIOR | 1 | |
| OET25500043 | G1/2"NIPPLE EXTERIOR | 1 | |
| OET25500046 | G1/2"NIPPLE INTERIOR | 1 | |
| OET25500047 | HOSE FITTING 13MM | 1 | |
| OET25500052 | HOSE FITTING 10MM | 1 | |
| OET25500053 | HOSE FITTING 13MM | 1 | |
| OET25500088 | OET NIP SERIE K, G1/4BI | 1 | |
| OET25500091 | NIPPEL-K/DN6 G1/4" UITW ST | 1 | |
| OET25500093 | OET NIP SERIE K G1/8BU | 1 | |
| OET25500101 | NIPPEL-E1/DN8 G1/4" UITW ST | 1 | |
| OET25500102 | OET NIP SERIE E1 G3/8BU3 | 1 | |
| OET25500103 | OET NIP SERIE E1 G1/4BI | 1 | |
| OET25500105 | OET NIP NSERIE E1 G3/8BI | 1 | |
| OET25500107 | OET NIP SERIE E1 SL08MM | 1 | |
| OET25500108 | OET NIP SERIE E1 SL10MM | 1 | |
| OET25500109 | OET NIP SERIE E1 SL13MM | 1 | |
| OET25500114 | OET NIP SERIE K SL08MM | 1 | |
| OET25500115 | OET NIP SERIE K SL10MM | 1 | |
| RDP1.2/.825-500H TI | Reflection Ring Probe, 500H-10Kz | 1 | |
| RFDT-125-500 | RACK FEED DRILL MOTOR | 1 | |
| S3S21255000 | STARTER FUEL MANIFOLD COVER | 1 | |
| SPD.125-500K | Spring Loaded Probe, .125" Diameter, 200KHz-1MHz, Triax Connector | 1 | |
| T-2108025500 | 20 X 7 X 2 3/16 PLASTIC CASE | 1 | |
| TMHD.625/500K | .625" Manual Hole Probe, 500KHZ, Unshielded, Differential, Triax | 1 | |
| TPEN92-5/500K | 90° Surface Probe, .125"Ø x .2" Drop x 5"Long, 200KHz-1MHz, Triax connector | 1 | |
| URYKIT-108SS/.125-.500 | Stainless Steel Y Probe Kit, 8 probes from .125" to .500", 100KHz-2MHz, Shielded, Includes Pelican Case w/Placard | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
