| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 21101 | SPRING: LATCH,ST, | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| 01211010 | 440SMJ.10-CROW-RING SPANNER,SPEC MOD. | 1 | ||
| 01211014 | 440SMJ.14-CROW-RING SPANNER SPEC MOD. | 1 | ||
| 02211016 | 440SMJ.16-CROW-RING SPANNER SPEC MOD. | 1 | ||
| 02211018 | 440SMJ.18-CROW-RING SPANNER SPEC MOD. | 1 | ||
| 040-21101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 0721101-1 | BRACKETS | 1 | ||
| 0721101-3 | BRACKETS | 1 | ||
| 0J21101 | TEST EQUIP PRV ADJUST/TEST | 1 | View Images / Tech Appraisal | |
| 105-42110.14 | BEARING HOUSING | 1 | ||
| 1122121-101 | RESTRAINT SYSTEM ASSY | 2 | ||
| 1211010 | CROW-RING SPANNER,SPEC MOD. | 1 | ||
| 1211014 | CROW-RING SPANNER SPEC MOD. | 1 | ||
| 2040021-101 | VALVE | 1 | ||
| 21-10-12 | PRESSURE TEST CAP | 1 | ||
| 211-01-641 | TOOL-LOCKING MGC10CLUSTER | 1 | ||
| 211011 | WASHER | 1 | ||
| 2211016 | CROW-RING SPANNER SPEC MOD. | 1 | ||
| 2211018 | CROW-RING SPANNER SPEC MOD. | 1 | ||
| 280A3121-101 | WIRE KIT | 1 | ||
| 31B3211-01 | GASKET-IGNITER | 1 | ||
| 350A91-0211-01/PHP | SHACKLE, GAGE 16 | 1 | ||
| 4102110-1 | Coupling Spline | 1 | ||
| 412-240-021-101 | TOOL SET | 1 | ||
| 427-044-121-101 | RING, RETAINING | 1 | ||
| 430-240-021-101 | Anchor Plate Assembly (430-240-021-101) | 1 | ||
| 4621101100 | GAUGE | 1 | ||
| 52110162 | 7762-1-REST FOR DOCKING STATION | 1 | ||
| 52110191 | 7791-1-EXTENSION UNIT FOR 7791 TO 1000 Nm | 1 | ||
| 52110192 | 7792-1-EXTENSION UNIT FOR 7792 TO 300 | 1 | ||
| 58211010 | 731/10.10-10mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211011 | 731/10.11-11mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211012 | 731/10.12-12mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211013 | 731/10.13-13mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211014 | 731/10.14-14mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211015 | 731/10.15-15mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211016 | 731/10.16-16mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211017 | 731/10.17-17mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211018 | 731/10.18-18mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 58211019 | 731/10.19-19mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 60000021-101 | AHRS CALIBRATION SOFTWARE (for Windows) | 1 | ||
| 621101 | CRIMP TOOL, 8 STEP MINI PNEU. | 1 | ||
| 622-1101-001 | ILS SIGNAL GENERATOR (ROCKWELL COLLINS) | 1 | ||
| 67321-26-190, 67321-10-190, 67321-15-250 AND 67321-27-250 | HOWELL HEATER PROBE - USED TO TEST OVERHEAT SWITCH PART NUMBERS | 1 | ||
| 67621-101 | ACTUATOR GROUP ASSEMBLY | 1 | ||
| 68921-101 | HEIGHT CHECK FIXTURE | 1 | ||
| 703A91-0211-01/PHP | SIZE 16 SHACKLE | 1 | ||
| 703A91021101 | SHACKLE, GAGE 16 | 1 | ||
| 71821-101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 732110-142 | Shim-Solid | 1 | ||
| 77000D21101000000 | 14/15 HRG PHASE | 1 | ||
| 826477211010 | BAHCO EASYCU | 1 | ||
| 826480211010 | EASY CUT 3/4 | 1 | ||
| 98A52007521101 | FLAT STEEL BAR | 1 | ||
| 98A57103021101 | CALIBRAT CALIBRATION STANDARD | 1 | ||
| 9999L021101 4418 | CORE THRUST REVERSER ACTUATOR TOOL | 1 | ||
| A27021-101 | Pad | 1 | ||
| A32110-1 | PIN PULLER EQUIPMENT - BRAKE ROD, MAIN LANDING GEAR | 1 | ||
| A5211017620000 | BUSHING | 1 | ||
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | ||
| C211010K | MANOMETRO 0-350 PSI | 1 | ||
| DC-10-22-11-01 | LVDT EQUALIZATION TEST EQUIPMENT | 1 | ||
| FSNM58211017 | WRENCH INSERT KEY-OPEN END | 1 | ||
| FSNM58211019 | WRENCH INSERT KEY-OPEN END | 1 | ||
| G32-11-01-2B | MLG AXLE INSPECTION TOOL | 1 | ||
| G601R321101-1-REVNC | WRENCH - MLG PINTLE PIN NUT | 1 | ||
| G601R321101−1 | Wrench − MLG Pintle Pin Nut | 7 | ||
| G601R521101-1 | ASSEMBLY TOOLS | 1 | ||
| G670−321101−2 | Sleeve − MLG Axle Protection | 3 | ||
| G670321101-1 | SLEEVE - MLG AXLE PROTECTION | 2 | ||
| G698−321101−101 | Sleeve − MLG Axle Protection | 1 | ||
| J211-01001-50 | KEYSK: STL .25-.25, | 1 | ||
| Keithley 2110/120 | 5.5 Digit Bench Digital Multimeter | 1 | ||
| MIT251A2110-1 | CONTROL WHEEL LOTO TOOL | 1 | ||
| PE21101-3-2TA | THIS IS NOT A TOOL | Not Available | Not Available | |
| PE21101-3-5TA | THIS IS NOT A TOOL | Not Available | Not Available | |
| PT2-110/1 | CRIMP TOOL, MINI, W/LOCATOR | 1 | ||
| PT2-110/14 | CRIMP TOOL, MINI, W/LOCATOR | 1 | ||
| PT2-110/15 | CRIMP TOOL, MINI, W/LOCATOR | 1 | ||
| PT2-110/16 | CRIMP TOOL, LARGE, W/LOCATOR | 1 | ||
| PT2-110/17 | CRIMP TOOL, LARGE, W/LOCATOR | 1 | ||
| PT2-110/18 | CRIMP TOOL, MINI, W/LOCATOR | 1 | ||
| PWC44211-01 | EXTRACTOR SEAL - PRATT & WHITNEY CANADA | 2 | ||
| RB T102121-101 | Puller Assembly | 1 | ||
| RB T103121-101 | Plate Assembly, Adapter | 1 | ||
| RB T103321-101 | Support | 1 | ||
| S211-010 | CANOPY/NOSE COVER (also covers turtledeck intakes) | 1 | ||
| S3124121101 | ASSEMBLY BATTERY CONTACT PCB | 1 | ||
| S3325021101 | FOAM TAPE,FRONT LCD PROTECTION | 1 | ||
| S670-521101TFIX6-1 | INTERNAL SERVICE-DOOR-HANDLE TOOL | 5 | ||
| SE-32-1101 | BELLOTA PUNTO TRASERO PATA TREN PRINCIPAL | 1 | ||
| SG 703A91-0211-01 | SHACKLE, SIZE 16 | 1 | ||
| SWE58211010 | 731/10-03/19 O/ENDED INSERT | 1 | ||
| SWE58211014 | 731/10-02/20 INSERT TOOL | 1 | ||
| T102121-101 | Puller Assembly | 1 | ||
| T103121-101 | Plate Assembly, Adapter | 1 | ||
| T103221-101 | COVER LIFT PLATE | 1 | ||
| T103321-101 | Support | 1 | ||
| TORRO 12 110-130 | CLAMP | 1 | ||
| U21-101 | ENGINE INLET PLUGS (set of 2) | 1 | ||
| VFI21101PNP | FOAM PNP | 1 | ||
| X632P6021101 | MGB/MM ECUREUIL CONTAINER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
