| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2003-1 | Flush Rivet Squeezer Set - Length: 1/8", Face Diameter: 3/8" | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) CG9000062-0031 | TOOL, CARGO DOOR ACTUATOR OVERRIDE ASSY (CALIBRATION) (CALIBRATION) | 1 | ||
| 11-20-0314 | IDT - Manual Press For Ribbon Cable | 1 | ||
| 1159SEM20031-HE | THRUST REVERSER LIFT SLING | 1 | ||
| 120031 | CM-17 SL Hd Adapter 1/4 (Qty 10) | 1 | ||
| 1AE1N20031 | PLUG | 1 | ||
| 1AE1N20031 REV NC | PLUG | 1 | ||
| 2003-109-2 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2003-11 | Flush Rivet Squeezer Set - Length: 3/4", Face Diameter: 3/8" | 1 | ||
| 2003-16 | Flush Rivet Squeezer Set - Length: 1/8", Face Diameter: 1/2" | 1 | ||
| 2003-18 | Flush Rivet Squeezer Set - Length: 1/4", Face Diameter: 1/2" | 1 | ||
| 2003102 | Bombardier C-Series (CS100 & CS300) Towbar Head Only, pairs with Narrowbody Multi Head Towbar | 1 | ||
| 2003103 | CS100/300 & A220 Towbar | 1 | ||
| 2003106 | A400 Towbar | 1 | ||
| 2003120 | New "Safe-Lav™" LC180-RJ2E-SL Lavatory Service Cart. Features a patent pending, 3-gallon batching system to eliminate inadvertent overfilling of aircraft lav system. Ideally sized for corporate lav systems, this unit eliminates costly operator and meter f | 1 | ||
| 2003138 | towbar for Lockheed Martin C-130 Series aircraft with FLIR. Heavy duty steel towbar features linear & radial shear protection, road speed rated wheels-hubs and bearing. | 1 | ||
| 200317658-30 | TEST SET, PRESSURE TEMPERATURE | 1 | ||
| 2003199 | SHEAR PIN | 1 | ||
| 212-92020-03.1 | Nose Landing gear special wrench | 1 | ||
| 214-782-003-1 | SUPPORT ASSY | 1 | ||
| 285200-3-1 | RETAINING RING DRIVER | 1 | ||
| 29201266051 200315 | SAFETY CABINET AIR CONTROL WITH FAN | 1 | ||
| 320-031 | BUTTERFLY | 1 | ||
| 429-242-003-101 | BEARING REMOVAL TOOL | 1 | ||
| 429BF-2003-1 | SUPPORT EXTENSION | 1 | ||
| 47200-31 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 591200-31G01 | TOOL | 1 | ||
| 6200-3/16-BN-BNC | PROBE | 1 | ||
| 76700-20031-041 | BLADE HANDLER | 1 | ||
| 822-0031-001 | TEST ADAPTOR | 1 | ||
| 8810120031 | CLE A PIPE DE 13 SPEC | 1 | ||
| 90-MRP-AIR-2003-10 | Bowers Internal / External PD Gauge with 10" reach | 1 | ||
| 90101S12-0031-00 | SCREEN,SILK | 1 | ||
| 9749020031 | LOCK | 1 | ||
| 97A76102003100 | TOOL | 1 | ||
| A22003-1 | A/THROTT CLUTCH COMP MAINT EQP | 1 | ||
| A22003-16 | TOOL | 1 | ||
| A22003-160 | CABLE TEST | 1 | ||
| A32003-1 | SPRING COMPRESSOR - SIDE STRUT, MAIN LANDING GEAR (MLG) | 12 | ||
| A32003-11 | FITTING | 1 | ||
| A32003-11-CM | 050THK A36 | 1 | ||
| A32003-12 | FITTING | 1 | ||
| A32003-12-CM | 050THK A36 | 1 | ||
| A52003-1 | LOCK - COUNTERBALANCE, ENTRY AND SERVICE DOORS | 10 | ||
| AFNDT-2003-1A-2 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | ||
| AFNDT-2003-1AL | "EC REFERENCE STANDARD U8860405 | 1 | ||
| AFNDT-2003-1S | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 STEEL. Includes Test Report and Certificate of Confor | 1 | ||
| AFNDT-2003-1S-1 | 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 Thru EDM notches .005"(+/- .001") and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 4340 Steel. Includes Test Report and Certificate... | 1 | ||
| AGE20031-04 | TRANSFORMER, CURRENT, ASSEMBLY, OUTLINE, 1000:1 | 1 | ||
| AHRB200-31 | LUB BOWL | 1 | ||
| B12003-1 | TOOL | 1 | ||
| B200-310 | HORIZONTAL STABILIZER COVER, ALL YEAR USE | 1 | ||
| B2003-11 | RIGGING PIN | 1 | ||
| B2003-12 | RIGGING PIN | 1 | ||
| B2003-13 | TOOL | 1 | ||
| B2003-14 | RIGGING PIN | 1 | ||
| B2003-15 | PIN RIG | 1 | View Images / Tech Appraisal | |
| B2003-17 | RIGGING PIN | 1 | ||
| B2003-18 | RIGGING PIN | 1 | ||
| B2003-19 | RIGGING PIN | 1 | ||
| B22003-1 | Boeing | 1 | ||
| B32003-1 | PIN PULLER - TRUNNION, NOSE LANDING GEAR (NLG) | 12 | ||
| B32003-1-M | MFD PARTS FOR -1 | 1 | ||
| B32003-10 | SUPPORT PLATE | 1 | ||
| B32003-12 | LIFT SHAFT | 1 | ||
| B32003-13 | WRENCH | 1 | ||
| B52003-1 | TOOL | 1 | ||
| B52003-11 | TOOL | 1 | ||
| B52003-12 | BARRIER SAFETY PAX | 1 | ||
| B52003-15 | SAFETY BARRIER - PASSENGER DOOR | 10 | ||
| B52003-15-HM | HYDRO MFD PARTS-BARRIER | 1 | ||
| B52003-15-LBLPS | -15 BARRIER LESS BLP'S | 1 | ||
| B52003-15-ML | MFD PARTS FOR -15 LESS ANODIZE | 1 | ||
| B52003-15-NET | NET PORTION OF -15 | 1 | ||
| B52003-15-S | STRAP & D-RING NET | 1 | ||
| B52003-18 | Rod | 1 | ||
| C12003-1 | Adapter Nozzle | 5 | ||
| C22003-1 | Boeing | 1 | ||
| C22003-18 | TEST BOX MACH. TRIM | 1 | ||
| C32003-1 | REM EQUPT. | 7 | ||
| C32003-11 | ROD | 1 | ||
| C32003-12 | BLOCK | 1 | ||
| C32003-16 | REMOVAL EQUIPMENT - TRUNNION LINK PIN, MAIN LANDING GEAR | 1 | ||
| C32003-19 | FRAME | 1 | ||
| C52003-1 | TEST EQUIPMENT - BACKLASH, AFT AIRSTAIRS GEARBOX | 1 | ||
| CG9000062-0031 | TOOL ASSY ACTUATOR CARGO DOOR OVERRIDE | 1 | ||
| CHA1542-0031 | EXTRACTION TOOL | 1 | ||
| CHA1542-0031PM | EXTRACTION TOOL | 1 | ||
| F70200-31 | Identification Tag | 1 | ||
| G22003-1 | Boeing | 1 | ||
| G22003-132 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | ||
| G22003-133 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | ||
| G22003-134 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | ||
| G22003-135 | TEST EQUIPMENT - AUTOTHROTTLE CLUTCH | 1 | ||
| G32003-1 | Boeing | 1 | ||
| G32003-19 | TEST SET - NOSE GEAR INTERLOCK ACTUATOR | 1 | ||
| G415-272003-1 | ADJUSTMENT BLOCK | 1 | ||
| G52003-1 | SAFETY STRUT - SIDE CARGO DOOR | 1 | ||
| G600-272003-1 | KIT, PORTABLE BEARING REMOVAL | 1 | ||
| G601R072003-1 | BALLAST ASSEMBLY - NOSE | 3 | ||
| G601R272003−1 | Fixture − Rudder and Neutral Position | 4 | ||
| G700-072003-1 | KIT, BALLAST BOX | 1 | ||
| IAE1N20031 | PLUG COWL INLET ENG. | 1 | ||
| J12003-1 | Platform | 1 | ||
| J22003-1 | RIGGING EQUIPMENT - AUTOTHROTTLE AND RUDDER BRAKE | 2 | ||
| J22003-1E | RIGGING EQUIPMENT - AUTOTHROTTLE AND RUDDER BRAK | 1 | ||
| J52003-1 | BARRIER - SAFETY, ACCESS DOOR | 9 | ||
| J52003-1-M | DOOR BARRIER | 1 | ||
| J52003-11 | DECK | 1 | ||
| J52003-11-CMF | 125 6061-T6 | 1 | ||
| J52003-11-ML | MFD PARTS FOR -2 LESS | 1 | ||
| J52003-12 | PAD | 1 | ||
| J52003-12/13 | PADS 2 EA -12 AND 13 | 1 | ||
| J52003-13 | PAD | 1 | ||
| K12003-1 | FILL TOOL - HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES - AIRFRAME | 4 | ||
| K32003-1 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR UPLOCK AND MAIN LANDING GEAR DOOR UPLOCK | 6 | ||
| K42003-1 | BREAKOUT EQUIPMENT - COMMON COMPUTING RESOURCE (CCR) CABINET (AVIONICS FULL DUPLEX SWITCHED ETHERNET (AFDX)/ POWER IN-LINE) | 2 | ||
| L623M2003104D343-01 | INJECTING - TOOL BUSHES IN THE CONTROL RING | 1 | ||
| MRRP-RUK-1-120-0.315" | Mini Rotary Probe | 1 | ||
| MSE80-200316 | SCRAPER | 1 | ||
| MV2003100A | ADAPT. PACK KIT STANDARD | 1 | ||
| MV2003101A | TRANSTECH DELX.ADAPT. KIT | 1 | ||
| MV2003120 | STARTER EU ADAPTERSET | 1 | ||
| SR20-031 | EXTENDED CANOPY COVER w/ Hail Protection | 1 | ||
| TSRM6020031/1 | CABLE FOR KDT 249 127/1 | 1 | ||
| UVU2003100A | ADPTR KIT TRANSTECH STD REVSED | 1 | ||
| UVU2003101A | ADPTR KIT TRANSTECH DLX REVSED | 1 | ||
| WS1042003155 | MAG. VALVE | 1 | ||
| ZNDT-2003-1S | STEEL MUTLI HOLE REFERENCE STANDARD>>> THE NOTCH SPECIFICATION IS 0.030'' X 0.030'' (45° ) CORNER NOTCH | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
