| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 20202 | WASHER-.880DX .453 ID. | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2020-220V-N-EMB314 | 2020HR TURBO PROBALANCER (CALIBRATION) | 1 | |
| (CALIB) 202028-CA | MLG DEBOGGING YOKE | 1 | |
| 02020208 | Socket 3/8" 20,8mm L.65mm | 1 | |
| 2020-220V-N-EMB314 | ANALYSER, PROBALANCER-MODEL 2020 | 1 | |
| 2020-2669 | 0-12 BAR REGULATOR, PRESSURE GAUGE | 1 | |
| 20202-35 | JACK | 1 | |
| 2020208 | 3/8DRx20.8mm SOCKET EXDP BIHEX | 1 | |
| 202028-CA | MLG DEBOGGING YOKE | 1 | |
| 22520-2-02 | POSITIONER, CRIMPING TOOL (DMC) | 1 | |
| 2823C20202M99WF-1 | Weld Fixture | 1 | |
| 332A91420202 | NOSE GEAR COLLAR | 1 | |
| 350A96320202 | CAP, BLANKING, EPICYCLIC REDUCT.GEAR | 1 | |
| 4-1020-202 | TEST SET | 1 | |
| 43100-20-2020 | TORQUE LIMITER ASSEMBLY | 1 | |
| 43100-20-2021 | TORQUE LIMITER SHIMMING | 1 | |
| 43100-20-2025-X | BEARING PRESS | 1 | |
| 43202022 | SPANNER DBLE ENDED | 1 | |
| 4711C20202M99WF-2 | Weld Fixture | 1 | |
| 537220202 | MOULD P/N 537220202 V2500LHT Dwg No.(537220202) | 1 | |
| 55-1202-02 | T1202-02 HF INTERFACE CABLE (WITH MOD 3) | 1 | |
| 62202-0201 | Signal Header, 5-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0202 | Signal Header, 5-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0203 | Insertion Module for Advanced Mate Signal Header, 6-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0204 | Insertion Module for Advanced Mate Signal Header, 6-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0205 | Insertion Module for Advanced Mate Signal Header, 8-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0206 | Insertion Module for Advanced Mate Signal Header, 6-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0207 | Insertion Module for Advanced Mate Signal Header, 6-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0208 | Insertion Module for Standard Shield Signal Header, 6-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0209 | Insertion Module for Standard Shield Signal Header, 8-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0210 | Insertion Module for Standard Shield Signal Header, 8-Row by 25-Wide, 50.00mm | 1 | |
| 62202-0211 | Backplane 6 and 8-Row Power Module Insertion Tool | 1 | |
| 62202-0212 | Backplane Alignment Block | 1 | |
| 62202-0213 | Insertion Module | 1 | |
| 62202-0214 | Insertion Module | 1 | |
| 62202-0215 | Insertion Module | 1 | |
| 62202-0216 | Signal Header, 6-Row by 10-Wide, 20.00mm | 1 | |
| 62202-0217 | Insertion Module Signal Header, 6 Row by 25 Wide, 50.00mm | 1 | |
| 62202-0220 | Manual Extraction Tool, Right Angle High Speed Dock | 1 | |
| 62202-0222 | Floating High-Speed Docking Header Insertion Tool | 1 | |
| 62202-0234 | Insertion Module | 1 | |
| 62202-0235 | Modular Press In Tool | 1 | |
| 62202-0236 | Modular Press In Tool | 1 | |
| 62202-0237 | Modular Press In Tool | 1 | |
| 62202-0238 | Modular Press In Tool | 1 | |
| 62202-0239 | Modular Press In Tool | 1 | |
| 62202-0243 | Modular Press In Tool | 1 | |
| 62202-0250 | Vertical High Speed Dock Extractor Kit | 1 | |
| 62202-0260 | Right Angle High Speed Dock Extractor Kit | 1 | |
| 62202-0270 | Interposer Extractor, High Speed Dock | 1 | |
| 62202-0280 | Extractor Kit, Right Angle High Speed Dock | 1 | |
| 62202-0290 | Manual Extraction Tool, Right Angle High Speed Dock | 1 | |
| 69020-2025 | Arbor Press Fixture | 1 | |
| 707002-0202 | THIS IS NOT A TOOL | Not Available | Not Available |
| 83820202 | FLEXIBLE FOAM | 1 | |
| 872-0202 | Housing | 1 | |
| 98D27804020202 | SIDE CLAMP | 1 | |
| 98L32104020202 | PROBE | 1 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S54005020202 | NDT CALIBRATION STANDARD | 1 | |
| 9990202021 | COTTER PIN | 1 | |
| A32020-2 | SADDLE ASSY | 1 | |
| A32020-26 | RETAINER NLG | 1 | |
| A52020-2 | TOOL | 1 | |
| AC143620-2-02 | HOLDING FIXTURE | 1 | |
| AIP12-02027 | RADIUS NARROW WHEEL 5 | 1 | |
| APS20202 | SABRE RIVET GUN | 1 | |
| B32020-2 | UPPER ROD ASSY | 1 | |
| B32020-2-F | UPPER ROD | 1 | |
| B32020-20 | Pin | 1 | |
| B32020-21 | Sleeve | 1 | |
| B32020-22 | Sleeve | 1 | |
| B32020-23 | STRAP ASSY | 2 | |
| B32020-28 | ROD | 1 | |
| B32020-29 | ROD | 1 | |
| B52020-2 | ROTATE MAIN CARGO DOOR TOOL | 1 | |
| B72020-29 | LOCK SET - LEADING EDGE | 1 | |
| BAH202.020 | 6 THRU SCREWDRR | 1 | |
| C32020-2 | EXTENSION BAR ASSY | 1 | |
| C32020-2-F | EXTENSION BAR | 1 | |
| C71020-20/28-01 | Snapper pin | 1 | |
| CBFG-6-1-N-.2020/.2050 | FINAL HOLE GAGE | 1 | |
| D2557212020200 | THIS IS NOT A TOOL | Not Available | Not Available |
| G1003202027-007 | PROXIMITY SENSOR ANTI-TARGET NOTE: -007 SUPERCEDED BY -011. | 1 | |
| G1003202027-011 | ANTI-TARGET ASSY, PROX SENSOR | 3 | |
| G1003202028-001 | TARGET, SENSOR PROXIMITY | 3 | |
| GSE55720-202 | 1045 FLAT STEEL PLATE | 1 | |
| GZ20202A | THIS IS NOT A TOOL | Not Available | Not Available |
| HC1202-02 | VALVE, | 1 | |
| HC2020-214 | RING: BACKUP,PTFE, | 1 | |
| HC2020-220 | RING: BACKUP,PTFE, | 1 | |
| HC2020-224 | RING: BACKUP,PTFE, | 1 | |
| HC2020-225 | RING: BACKUP,PTFE, | 1 | |
| HC2020-227 | RING, BACK-UP, | 1 | |
| HC2020-228 | RING: BACKUP,PTFE, | 1 | |
| HC2020-229 | RING: BACKUP,PTFE, | 1 | |
| HC2020-232 | RING, BACK-UP, | 1 | |
| J32020-2 | SLING | 1 | |
| J32020-2-S | SLING -2-S LESS STENCILLING | 1 | |
| J32020-20 | Sling | 1 | |
| J52020-2 | FRAME ASSY | 1 | |
| J52020-24 | BLOCK | 1 | |
| K32020-2 | BRACE ASSEMBLY | 4 | |
| K32020-26 | RETAINER EQUIPMENT | 1 | |
| K32020-27 | RETAINER EQUIPMENT | 1 | |
| K32020-29 | RETAINER EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR TORSION LINK | 9 | |
| M22520-2-02 | POSITIONER TOOL | 11 | |
| MW202-02DABS | Moore & Wright MW202-02DABS Digital Snap Micrometer Absolute Range 25-50mm/1-2" Resolution 0.001mm/0.00005" | 1 | |
| PRO SERIES PRO CLASSIC 420 202 | THIS IS NOT A TOOL | Not Available | Not Available |
| RC12-40M20-2024T3-194 | Countersink Standard, 12 Holes of 5/32" to 5/16" x 1/64" plus 3/8", .040" in CS and .020" midwall, 2024T3 Aluminum.... | 1 | |
| RH-.750-T20-2024T3 | Hole Standard, .750"Ø x .020" Thru notch, 2024T3 | 1 | |
| RH100-T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .020" thru notch, 2024T3 Aluminum | 1 | |
| RH101-T20-2024T3 | 10 Hole Standard, 3/16" to 13/16, .020" Thru notch, 2024T3 | 1 | |
| RH12-C30M20-2024T3 | 12 holes, 1/8” thru 3/4” w/ .030” corner and .020” midwall notches | 1 | |
| RH120-C30M20-2024T3 | 12 HOLES, 1/8” THRU 3/4” W/ .030” CORNER AND .020” MIDWALL NOTCHES | 1 | |
| RH121-C30M20-2024T3 | 12 Hole Reference Standard, 1/8" thru 3/4", w/.030" corner notches,.020" Midwall notches, 2024-T3 | 1 | |
| RH122-T20-2024T3 | 12 Hole Reference Standard, 5/32" to 13/16", with .020" thru notch, 2024-T3 Aluminum | 1 | |
| RH13-M20-2024T3 | 13 Hole Reference Standard, Midwall Notch, 2024-T3 AL holes sizes 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0 | 1 | |
| RH13-T20-2024T3 | 13 Hole Reference Standard, Thru Notch, 2024-T3 AL | 1 | |
| RH18-T20-2024T3 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 thru notches, 2024T3 Aluminum | 1 | |
| RH20-C30M20-2024T3 | PERIY@LEKIAVIATION.COM | 1 | |
| RH200-C30M20-2024T3 | 20 Hole Reference Standard, 1/8" Thru 3/4", w/.030" Corner Notches and .020" Midwall, 2024-T3 | 1 | |
| RH70-C30T20-2024T3 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, .030" Corner, 2024-T3 | 1 | |
| RH70-T20-2024T3 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Aluminum | 1 | |
| RH8-T20-2024T3 | 8 holes, 1/8” thru 1/2” w/ .020” thru-wall notches | 1 | |
| RH80-T20-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, 2024-T3 | 1 | |
| RM100-C30T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .030" corner notch.020" through notch, 3 surface notch, 2024T3 Aluminum | 1 | |
| RM120-C30C20-2024T3 | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30M20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Midwall & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T3-1 | 12 HOLE STANDARD - HOLE SIZES; 3/16 INCH (4.74MM) 7/32 INCH (5.53MM) 1/4 INCH (6.35MM) 9/32 INCH (7.13MM) 5/16 INCH (7.92MM) 11/32 INCH (8.71MM) 3/8 INCH (9.52MM) 7/16 INCH (11.09MM) 1/2 INCH (12.7MM) 9/16 INCH (14.27MM) 5/8 INCH (15.87MM) 3/4 INCH (19.05 | 1 | |
| RM120-C30T20-2024T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T6 | 1 | |
| RM120-C40T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM14-C30M20-2024T3 | Multi-use standard, 14 holes, .030" corner notches, .020" midwall notches, .008", .020", .040" surface notches | 1 | |
| RM150-T20-2024T3 | 15 Hole Standard, .020" thru notch, 2024T3 Aluminum | 1 | |
| RM290-C30T20-2024T3 | MULTI PURPOSE STANDARD, ALUMINUM, 1/8" TO 1" X 1/32" W/ .020 THRU AND .030 CORNER NOTCH + 3 SURFACE NOTCHES | 1 | |
| RM6-C40T20-2024T3 | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches 2024T3 | 1 | |
| RM80-C30T20-2024T3 | 8 Hole Standard, .125" thru .500", 2024-T3 Aluminum, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-T20-2024T3 | 8 Hole Standard, .125" thru .500", 2024T3 Alum, .020" Thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM82-T20-2024T3 | 8 Hole Standard, 1/8 thru 11/32 hole dia., 2024T3 Alum, .020" Thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM87-C30M20-2024T3 | Hole Standard, 1/8" to 9/16 x 1/16" Inc. with .030" corner notch and 0824 surface notches,.020" Midwall Notches, Aluminum | 1 | |
| S5387240420202 | TOOL | 1 | |
| SC20202 | 3/8" DR. 1-12" EXTENSION | 1 | |
| SGA220202 | OZONE GENERATOR | 1 | |
| SN20202 | 3/8" DR. 1-12" EXTENSION | 1 | |
| T1202-02 | CABLE | 1 | |
| TH20-2020 | DEAD BLOW NYLON 1850G | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
