| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 20200 | SPARK PLUG HOLE CHASER | 6 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 01-1202-00 | TOOL | 1 | ||
| (CALIB) 98S57105020200 | PILOT BUSHING | 1 | ||
| 002020002-001 | WING JACK ADAPTORS | 1 | ||
| 01-1202-00 | T1202 HF/VHF DFIU (WITH MOD 11, MOD 13) | 1 | ||
| 01-1202-000 | TOWBAR | 1 | ||
| 01-1202-0000 | TOWBAR | 13 | ||
| 01-1202-0000-10 | OPTION: 3, | 1 | ||
| 01-1202-0000-4 | TOWBAR, | 1 | ||
| 01-1202-0000-B6 | TOWBAR:, | 1 | ||
| 01-1202-0000A9 | TOWBAR NULTI-HEAD, | 1 | ||
| 01-1202-0000SP | TOWBAR: JOHN DEERE GRN, TRONAIR,AL | 1 | ||
| 01A1202-0000 | Towbar, Multi-Head (Ce) | 1 | ||
| 01B1202-0000 | Towbar, Multi-Head | 1 | ||
| 0202000080 | UNION | 1 | ||
| 0202000240 | LOCKING PLATE | 1 | ||
| 02020008 | Socket 3/8" 8mm L.54mm | 1 | ||
| 02020010 | Socket 3/8" 10mm L.54mm | 1 | ||
| 02020011 | Socket 3/8" 11mm L.54mm | 1 | ||
| 02020012 | Socket 3/8" 12mm L.54mm | 1 | ||
| 02020013 | Socket 3/8" 13mm L.54mm | 1 | ||
| 02020014 | Socket 3/8" 14mm L.60mm | 1 | ||
| 02020015 | Socket 3/8" 15mm L.60mm | 1 | ||
| 02020016 | Socket 3/8" 16mm L.60mm | 1 | ||
| 02020017 | Socket 3/8" 17mm L.65mm | 1 | ||
| 02020018 | Socket 3/8" 18mm L.65mm | 1 | ||
| 02020019 | Socket 3/8" 19mm L.65mm | 1 | ||
| 02020021 | Socket 3/8" 21mm L.65mm | 1 | ||
| 02020022 | Socket 3/8" 22mm L.65mm | 1 | ||
| 0292020090 | ARRIEL 2H ,DRESSED | 1 | ||
| 0292720200 | PIPE,OIL,FRONT BEARING SUPPLY | 1 | ||
| 02F99202-001T00L | ECS EXHAUST DUCT COVER | 1 | ||
| 02F99202-002T00L | ECS EXHAUST DUCT COVER | 1 | ||
| 0465720200 | PUMP OIL TO TANK PIPE | 1 | ||
| 073692020000000 | ELECTRONIC BOX | 1 | ||
| 11-20200 | MULTILOAD MODULE | 1 | ||
| 110602020-01 | CABLE ADAPTOR NO 3 | 1 | ||
| 120-20064 | MINIMUM RING | 1 | ||
| 120-200DEG F 49-92DEG C TEMP RANGE | PYROMETER | 1 | ||
| 12020.01 | Norbar 12020.01 - TW 4R P TYPE 1 SQ.DR | 1 | ||
| 12020000 | Universal joint 3/8" L.46mm | 1 | ||
| 17312-0-200 | Housing Support Fixture | 1 | ||
| 20-20-00 | 100 TON MAIN WING JACK | 1 | ||
| 202 003 | HOLDER WITH INTERNAL THREAD | 1 | ||
| 202-0053-501 | THRUST REVERSER LOCK OUT TOOL | 1 | ||
| 202-0061-1 | DEFLECTION TOOL | 1 | ||
| 2020008 | 3/8DR x 8mm SOCKET EX DP BIHEX | 1 | ||
| 2020010 | 3/8DRX 10MM SOCKET EX DP BIHEX | 1 | ||
| 2020011 | 3/8DRx 11mm SOCKET EX DP BIHEX | 1 | ||
| 2020012 | 3/8DRx 12mm SOCKET EX DP BIHEX | 1 | ||
| 2020013 | 3/8DRx 13mm SOCKET EX DP BIHEX | 1 | ||
| 2020014 | 3/8DRx 14mm SOCKET EX DP BIHEX | 1 | ||
| 2020015 | 3/8DRx 15mm SOCKET EX DP BIHEX | 1 | ||
| 2020016 | 3/8DRx 16mm SOCKET EX DP BIHEX | 1 | ||
| 2020017 | 3/8DRx 17mm SOCKET EX DP BIHEX | 1 | ||
| 2020018 | 3/8DRx 18mm SOCKET EX DP BIHEX | 1 | ||
| 2020019 | 3/8DRx 19mm SOCKET EX DP BIHEX | 1 | ||
| 2020021 | 3/8DRx 21mm SOCKET EX DP BIHEX | 1 | ||
| 2020022 | 3/8DRx 22mm SOCKET EX DP BIHEX | 1 | ||
| 20200AHSCSP4 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 20270202001 | TOOL | 1 | ||
| 2115B202-001 | RMTE Core | 1 | ||
| 212-92020-01.1 | Nose Landing gear special wrench | 1 | ||
| 212-92020-02.1 | Nose Landing gear special wrench | 1 | ||
| 212-92020-03.1 | Nose Landing gear special wrench | 1 | ||
| 214N2520-200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 220200 | TOOL | 1 | ||
| 30P512101202-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 320-200 | WING/NACELLE/TIP TANK COVERS, WINTER USE (set of 2) | 1 | ||
| 3202-0001-000 | TOOL | 1 | ||
| 330A93-2020-01 | TOOL,INSERTING BEARING SWASHPLATE | 1 | ||
| 332191-3202-00 | MGB STAND | 1 | ||
| 332191-4202-00/01/02 | NOSE GEAR COLLAR | 1 | ||
| 332A91-3202-00 | BASE,MGB | 1 | ||
| 332A91-4202-00 | LOCK-WASHER EXTRACTOR | 1 | ||
| 332A91-4202-00/01/02 | NOSE GEAR COLLAR | 1 | ||
| 332A93-4202-00 | Strut Pin Extractor | 1 | ||
| 332A94-3202-00 | KIT 332MK1 STEADY CONTROL | 1 | ||
| 332A95-5202-00 | SLING, MAIN ROTOR BLADE | 1 | ||
| 350A93-3202-00 | EXTRACTOR, POWER SEAL | 2 | ||
| 350A933202-00/PHP | GLUE PULLEER | 1 | ||
| 41010F25572020000 | Drawing template for labels (49 x 40 mm) positioning | 1 | ||
| 42020024 | Heavy duty ring spanner 24 L.180mm | 1 | ||
| 42020027 | Heavy duty ring spanner 27 L.190mm | 1 | ||
| 42020030 | Heavy duty ring spanner 30 L.200mm | 1 | ||
| 42020032 | Heavy duty ring spanner 32 L.235mm | 1 | ||
| 42020036 | Heavy duty ring spanner 36 L.245mm | 1 | ||
| 42020038 | Heavy duty ring spanner 38 L.250mm | 1 | ||
| 42020041 | Heavy duty ring spanner 41 L.265mm | 1 | ||
| 42020042 | Heavy duty ring spanner 42 L.265mm | 1 | ||
| 42020046 | Heavy duty ring spanner 46 L.280mm | 1 | ||
| 42020050 | Heavy duty ring spanner 50 L.290mm | 2 | ||
| 42020055 | Heavy duty ring spanner 55 L.300mm | 1 | ||
| 42020060 | Heavy duty ring spanner 60 L.345mm | 1 | ||
| 42020065 | Heavy duty ring spanner 65 L.355mm | 1 | ||
| 42020070 | Heavy duty ring spanner 70 L.365mm | 1 | ||
| 42020075 | Heavy duty ring spanner 75 L.375mm | 1 | ||
| 42020080 | Heavy duty ring spanner 80 L.385mm | 1 | ||
| 42020085 | Heavy duty ring spanner 85 L.385mm | 1 | ||
| 42020090 | Heavy duty ring spanner 90 L.410mm | 1 | ||
| 42020095 | Heavy duty ring spanner 95 L.410mm | 1 | ||
| 43100-20-2000-X | BEARING PRESS ASSEMBLY | 1 | ||
| 43100-20-2001 | ASSEMBLY FIXTURE | 1 | ||
| 43100-20-2002-X | BEARING ASSEMBLY FIXTURE | 1 | ||
| 43100-20-2003 | BEARING PUSHER | 1 | ||
| 43100-20-2004-X | PUSHER PIN | 1 | ||
| 43100-20-2006 | LONG BASE ASSEMBLY FIXTURE | 1 | ||
| 4649202002 | FREEWHEEL UNIT L/H | 1 | ||
| 520-200 | NOTAR THRUSTER COVER | 1 | ||
| 55-1202-00 | INTERFACE UNIT | 1 | ||
| 568-1-27202-006 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 568-1-27202-007 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 573-612 0-200 ±0,02 | MITUTOYO | 1 | ||
| 58202-0001 | INSERTION SLEEVE | 1 | ||
| 58202-0002 | GUIDE SLEEVE | 1 | ||
| 58202-0003 | GUIDE RING | 1 | ||
| 58202-0004 | THREADED STUD | 1 | ||
| 6097620-200 | AMPLIFIER | 3 | ||
| 61052-02-00-002 | TOOL | 1 | ||
| 61052-02-00-005 | TOOL | 1 | ||
| 61202-001-020 | TOOL | 1 | ||
| 62202-0000 | Manual Press for Micro-D Backshell Crimp Tool Kit, 25 Circuits | 1 | ||
| 7009−0820−200 | Cable − Coax | 1 | ||
| 703A92820200 | PROTECTIVE COVER OF HORIZONTAL STAB | 1 | ||
| 77000D24202000000 | PMG ISOLATION NEW EPGS | 1 | ||
| 8008120200 | POINT MASK SI 2 | 1 | ||
| 80081202000 | POINT MASK STAGE 2 | 1 | ||
| 8952-0-2001-R | Bearing Removal Tool | 1 | ||
| 9222202-.00 | STRAIGH SHAFT 100 | 1 | ||
| 944202000 | FLEX HANDLE | 1 | ||
| 95-92020-0001 | LANDING GEAR RIGGING ASSEMBLY | 1 | ||
| 95-92020-0003 | Landing Gear Rigging Assembly | 1 | ||
| 95-92020-001 | LANDING GEAR RIG | 1 | ||
| 95-92020-0101 | ADAPTOR NUT | 1 | ||
| 95-92020-0201 | ADAPTOR NUT | 1 | ||
| 9794420200 | O'RING SEAL | 1 | ||
| 97A26202000000 | DUMMY FIRE EXT BOTTLE ENGINE | 1 | ||
| 97A28002202000 | ADAPTER - ECOLOGICAL DRAINING SYSTEM | 1 | ||
| 97A28202001000 | TEST SET APU PUMP | 1 | ||
| 97A28202002000 | SIMULATOR-REFUEL/DEFUEL | 1 | ||
| 9895202001 | C-SCAN | 1 | ||
| 9896202001 | C-SCAN DATA ACQUISIT | 1 | ||
| 98A27508020200 | CABLE COMPLETE | 1 | ||
| 98A54003120200 | WRENCH-SPECIAL | 5 | ||
| 98D27804020200 | BLOCK | 1 | ||
| 98D71202001200 | CONTER LEVET | 1 | ||
| 98F27508202000 | PIN - ADJUSTMENT, FLAP INTERCONNECTING STRUT | 15 | View Images / Tech Appraisal | |
| 98F52107520200 | Wrench | 1 | ||
| 98L32104020200 | GAUGE BODY | 1 | ||
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | ||
| 98S533005020-200 | CALE ETALON | 1 | ||
| 98S54005020200 | NDT CALIBRATION STANDARD | 1 | ||
| 98S57105020200 | Bolt Guide | 5 | ||
| 98S57105020200-REVA | BOLT GUIDE TOOL | 1 | ||
| 98S571050202000 | BOLT GUIDE TOOL | 1 | ||
| 98S571050202000-ST | BOLT GUIDE TOOL | 1 | ||
| 9922020010 | BASE CONNECTOR | 1 | ||
| 99F21008420200 | HOUSING | 1 | ||
| A2577221220200 | CAP | 1 | ||
| A2577221820200 | BOLT | 1 | ||
| A320-200 | BYPASS & EXHAUST PLUGS, CFM-56 Engines (set of 8) | 1 | ||
| A325418202-000 | FITTING | 1 | ||
| A330-92020-0001 | Pylon-Wing central Union Torque tool | 1 | ||
| A5217602220200 | SHIM | 1 | ||
| A5237409820200 | FLAG | 1 | ||
| A5347302120200 | BUSHING | 1 | ||
| A5377644120200 | DOUBLER | 1 | ||
| A5527122320200 | SLEEVE | 1 | ||
| A5735007620200 | ASSEMBLY BULLET | 1 | ||
| A5735007820200 | PIN-RIGGING, RAT DROP OUT CONTROLS | 1 | ||
| A578452120200 | BUSHING | 1 | ||
| AGE-02020-001 | TOOL | 1 | ||
| AGE-02020-003 | TOOL | 1 | ||
| AH120-200 | BLADE COVERS (std type) (set of 3) | 1 | ||
| ALT20200001 | TEST UNIT-LOOP RESISTANCE(INDUCING CURRENT 1A 1KHZ)(IM2FSAL1) | 1 | ||
| AP20200 | MODULAR TEST | 1 | ||
| APN-4.5/20-200K | RIGID STRAIGHT SURFACE PROBE,ABS,SHIELDED, 4.5" LONG 20-200KHz, 4.5"LONG, 20-200KHz, Fe/NFe, Tip 3.30mm(.130"Ø), L=114mm(4.5") SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| APN-475-4.5/20-200K | RIGID SURFACE PROBE, ABS,SHIELDED .130"Ø(3.30mm), TIP, 4.5"(114 mm) LONG, 45° CRANK, .750" DROP, 200KHz LOCATOR, Fe/NFe, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| APN-925-3/20-200K | RIGID SURFACE PROBE ABS Shielded, 90° Degrees Tip, 200KHz, Fe/NFe, L=76mm(3.0"), Tip Dia .130"Ø(3.30mm). Includes Test Report and Certificate of Conformance. | 1 | ||
| ASPN-4.5/20-200K | RIGID SURFACE PROBE 20-200KHz, .125"OD WITH A 0.092"OD TIP, 4.5" LONG, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| ATP-10/20-200KHZ | RIGID SURFACE PROBE, ABS/ BRIDGE., 90° .125" Ø TIP, .030" DROP 10.0" LONG, FLAT TIP, TRIAX FISCHER CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance. | 1 | ||
| ATP-4.5/20-200KHz | LOW FREQUENCY SURFACE PROBE 20-200KHz, DIFFERENTIAL, .187" OD (Head Size), 4.5" LONG, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| ATPN-475-4.5/20-200K | RIGID SURFACE PROBE 20-200KHz, 45 DEGREE. .750" DROP, .125"OD, 4.5" LONG, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| ATPN-925-3/20-200K | RIGID SURFACE PROBE 20-200KHz, .125"OD, 90 DEGREE, .250" DROP, 3.0" LONG, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| BAH202008 | TEKNO+ SCREWDRIVER SET 7PC | 1 | ||
| BR20200915-1 | TOOL | 1 | ||
| CG9275202-0001 | KIT POSITIONER DUMMY ECCENTRIC | 1 | ||
| CG9281202-0001 | FUEL DRAIN TOOL | 1 | ||
| CI120200GSL | ANTENNA BLADE | 1 | ||
| D20*200 | TOOL | 1 | ||
| D2157104520200 | SHAFT | 1 | ||
| D2157121020200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D2527077620200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D2528191120200 | TOOL | 1 | ||
| D2557212020200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D2567045202000 | FLY AWAY KIT CASE COMPONENTS | 1 | ||
| D2721020200100 | PLATE | 1 | ||
| D3215303020200 | PIN | 1 | ||
| D3837022320200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D5237111220200 | FORK | 1 | ||
| D5237124120200 | GLASS SIGHT | 1 | ||
| D5311106820200 | TOOL | 1 | ||
| D5311281520200 | TRACK | 1 | ||
| D5347506420200 | HOOK AIRBUS | 1 | ||
| D5358541820200 | TOOL | 1 | ||
| D5598200120200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D5746020820200 | BUSH INSTALATION | 1 | ||
| D5754052520200 | COVER PIVOT BOLT | 2 | ||
| D5754052520200A | THIS IS NOT A TOOL | Not Available | Not Available | |
| D5757312520200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| DA20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| DAPT60-0202-00 | compression ring | 1 | ||
| E120-200 | BLADE COVERS (std type) (set of 3) | 1 | ||
| F20200-18 | 0-5000 PSI LG STRUT | 1 | ||
| F20200-35 | PRESSURE GAUGE | 1 | ||
| F252R4165-202-00 | TOOL | 1 | ||
| F252R5161-202-00 | TOOL | 1 | ||
| F27202000 | HEATSINK STORAGE BOX | 1 | ||
| F28202000 | DUMMY PIN ASSEMBLY | 1 | ||
| F2MA93202001 | TOOL | 1 | ||
| F2MA93202003 | TOOL | 1 | ||
| F532R5882-202-00 | TOOL | 1 | ||
| F5725091720200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| F5746232820200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| F5757109020200 | BUSHING DISASSEMBLY TOOL | 1 | ||
| F5757491720200 | BUSHING DISASSEMBLY TOOL | 1 | ||
| F7XC202000008 | TOOL BOX | 1 | ||
| F9243401620200 | RAMP | 1 | ||
| FB70020-100 (Cradle) & FB70020-200 (Transportation Stand) | CFM56-5C ENGINE STAND | 1 | ||
| FB70020-200 | STAND SHIPPING LOW P | 3 | ||
| FB70020-200 - Transport Stand | CFM56-5C ENGINE STAND | 1 | ||
| FE316920200 | RIGGING PIN | 1 | ||
| FLX1202-0025 | HOSE, FLEXIBLE | 1 | ||
| G120-200 | WING COVERS, WINTER USE, 120A model (set of 2) | 1 | ||
| G5757146320200 | BOLT | 1 | ||
| GP20200 | PROTAPER ROTARY INSTRUMENTS | 1 | ||
| GS220200-1 | DIAL INDICATOR HOLDER | 1 | ||
| HA-350A93-3202-00 | POWER SEAL EXTRACTOR | 1 | ||
| HC130H0202-000 | BRAKE BLEED TOOL | 1 | ||
| HC2020-008 | RING: BACKUP, | 1 | ||
| HC2020-010 | RING: BACKUP, | 1 | ||
| HC2020-012 | ORING:, | 1 | ||
| HC2020-014 | RING: BACKUP, | 1 | ||
| HC2020-015 | RING: BACKUP, | 1 | ||
| HC2020-019 | RING: BACKUP,PTFE, | 1 | ||
| HC2020-020 | RING, BACK-UP, | 1 | ||
| HC2020-026 | ORING:, | 2 | ||
| HC2020-028 | RING, BACK-UP, | 1 | ||
| HFL715420200 | PLIERS 28 01 200 | 1 | ||
| HY-D820-200 | MULTI-PURPOSE SCISSOR 200MM | 1 | ||
| HZ010H0020-200NDT | TEST PEICE-"A" FRAME RIB 8 + RIB 10 (4OFF) | 1 | ||
| L2157803420200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| L320-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| LT20200001 | ELECTRICAL TESTER - LOOP RESISTANCE | 1 | ||
| LTCT2020-03 | 59. MAINTENANCE KIT | 1 | ||
| M120-200 | WING COVERS (outboard of engine nacelle), WINTER USE (set of 2) | 1 | ||
| M22520-20-01 | CRIMPING TOOL | 1 | ||
| M83420-2-002 | CABLE: WIRE ROPE,CRES,100FT, 480LB TEST | 1 | ||
| M83420-2-004 | CABLE: WIRE ROPE,CRES,100FT, 480LB TEST | 1 | ||
| MAF2175A320-200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| MT6020/20/012 | TOOL | 1 | ||
| MT6020/20/026 | TOOL KIT, WORKSHOP V2 | 1 | ||
| MT6020/20/028 | TOOL KIT, CONSUMABLE PRODUCTS | 1 | ||
| MU20200827.1 | TOOL | 1 | ||
| MU20200827.2 | TOOL | 1 | ||
| MU20200827.3 | TOOL | 1 | ||
| MU20200827.4 | TOOL | 1 | ||
| MW2-02-0008/23 | PLATE - BLANKING, FUEL INLET/OUTLET | 1 | ||
| N2020-01S | REDUCER, | 1 | ||
| N2020-02S | REDUCER, | 3 | ||
| N2020-03S | REDUCER: TUBE END, | 1 | ||
| N2020-04S | REDUCER, | 1 | ||
| N2020-05S | REDUCER, | 1 | ||
| N2020-07S | REDUCER: TUBE END,ST, | 1 | ||
| N2020-08S | REDUCER: TUBE END, | 1 | ||
| N2020-09S | REDUCER, | 1 | ||
| NK103102-0200 | SEAL | 1 | ||
| PA20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| PWA202009 | TORQUE MULTIPLIER | 1 | ||
| R55V8007820200 | BUSHING | 1 | ||
| R5704700020200 | GUIDE-DRILL | 1 | ||
| R5704700220200 | GUIDE-DRILL | 1 | ||
| R5704700520200 | GUIDE, DRILLING - TRANSFER BACK, 3-4 INCH DIA. HOLE | 1 | ||
| R5704700620200 | TOOLING STUD | 1 | ||
| R5704700720200 | REAMER | 1 | ||
| R5704700820200 | GUIDE | 1 | ||
| R5724932820200 | BUSH-PINTLE LUG,FWD | 1 | ||
| RBE332A93-4202-00 | Strut Pin Extractor | 2 | ||
| RBE350A93-3202-00 | POWER TAKE-OFF SEAL EXTRACTOR | 2 | ||
| RS20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| S0003020200600 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S0003020200800 | QUICK RELEASE PIN | 1 | ||
| S2521809220200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S2728192020000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S5527500820200 | WEIGHT BALANCE | 5 | ||
| S7301202000000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| SC20200 | 3/8 DRIVE RATCHET | 1 | ||
| SN20200 | 3/8 DRIVE RATCHET | 1 | ||
| SP20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| SR20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| TB20-200 | WING COVERS, WINTER USE (set of 2) | 1 | ||
| TCA-2020-040 | Test eqpt-squib，fire extinguishing system | 1 | ||
| TCA-2020-068 | Test eqpt-squib，fire extinguishing system | 1 | ||
| TMH TJ20-20-00 | A320 NEO NOSE TRIPOD JACK | 1 | ||
| TMHAS02-02-00 | TOOL | 3 | View Images / Tech Appraisal | |
| TMHAS02-02-00-REVH | EXTENSION-1020MM | 2 | ||
| TMHAS20-20-00 | STAY STAY, SAFETY | 1 | ||
| TMY20-20-001 | BEAD FORMING TOOL KIT FOR "W-O-F" COUPLINGS | 1 | ||
| TMY20-20-002 | BEAD CHECKING RING GAUGE SET FOR "W-O-F" COUPLINGS | 1 | ||
| U820200 | PROBE | 1 | ||
| VR00182-02-0001 | SCREW IN ADAPTOR LEAK DOWN TEST | 1 | ||
| WSA20-200S | 5.5HP 200L COMPRESSOR 400V | 1 | ||
| YYL-120-2000 | BRAKE FILTER | 1 | ||
| ZP20200057 | CRIMPING TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
